Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 5.15.24-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1526 SMP Fri Feb 18 14:57:32 GMT 2022
- [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4
- [ 0.000000] random: fast init done
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] HighMem [mem 0x0000000030000000-0x00000001ffffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000037ffffff]
- [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
- [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
- [ 0.000000] percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536
- [ 0.000000] pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2046272
- [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:48:DB:A0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=bba11c34-02 rootfstype=ext4 fsck.repair=yes rootwait
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0x0000000012400000-0x0000000016400000] (64MB)
- [ 0.000000] Memory: 7705988K/8192000K available (10240K kernel code, 1389K rwdata, 3292K rodata, 2048K init, 590K bss, 158332K reserved, 327680K cma-reserved, 7405568K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] ftrace: allocating 35336 entries in 104 pages
- [ 0.000000] ftrace: allocated 104 pages with 3 groups
- [ 0.000000] trace event string verifier disabled
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] Rude variant of Tasks RCU enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25)
- [ 0.000000] random: get_random_bytes called from start_kernel+0x574/0x75c with crng_init=1
- [ 0.000001] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
- [ 0.000030] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
- [ 0.000091] bcm2835: system timer (irq = 26)
- [ 0.000761] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
- [ 0.000785] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
- [ 0.000808] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
- [ 0.000829] Switching to timer-based delay loop, resolution 18ns
- [ 0.001118] Console: colour dummy device 80x30
- [ 0.001877] printk: console [tty1] enabled
- [ 0.001954] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
- [ 0.002006] pid_max: default: 32768 minimum: 301
- [ 0.002159] LSM: Security Framework initializing
- [ 0.002331] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.002379] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.003929] cgroup: Disabling memory control group subsystem
- [ 0.004181] CPU: Testing write buffer coherency: ok
- [ 0.004673] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.005905] Setting up static identity map for 0x200000 - 0x20003c
- [ 0.006124] rcu: Hierarchical SRCU implementation.
- [ 0.007089] smp: Bringing up secondary CPUs ...
- [ 0.008270] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.009558] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.010925] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.011085] smp: Brought up 1 node, 4 CPUs
- [ 0.011134] SMP: Total of 4 processors activated (432.00 BogoMIPS).
- [ 0.011166] CPU: All CPU(s) started in HYP mode.
- [ 0.011192] CPU: Virtualization extensions available.
- [ 0.011956] devtmpfs: initialized
- [ 0.026813] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
- [ 0.027049] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.027107] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.036901] pinctrl core: initialized pinctrl subsystem
- [ 0.038177] NET: Registered PF_NETLINK/PF_ROUTE protocol family
- [ 0.042635] DMA: preallocated 1024 KiB pool for atomic coherent allocations
- [ 0.043496] audit: initializing netlink subsys (disabled)
- [ 0.043764] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
- [ 0.044381] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.045053] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.045111] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.045519] Serial: AMBA PL011 UART driver
- [ 0.060153] bcm2835-mbox fe00b880.mailbox: mailbox enabled
- [ 0.100908] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-02-04T12:05:40, variant start
- [ 0.110924] raspberrypi-firmware soc:firmware: Firmware hash is a26faf97e3bf76bcc23949d7cdab2f96f399a0c3
- [ 0.168542] Kprobes globally optimized
- [ 0.174083] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
- [ 0.178682] vgaarb: loaded
- [ 0.179164] SCSI subsystem initialized
- [ 0.179414] usbcore: registered new interface driver usbfs
- [ 0.179491] usbcore: registered new interface driver hub
- [ 0.179579] usbcore: registered new device driver usb
- [ 0.179994] usb_phy_generic phy: supply vcc not found, using dummy regulator
- [ 0.180523] pps_core: LinuxPPS API ver. 1 registered
- [ 0.180554] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.180604] PTP clock support registered
- [ 0.182223] clocksource: Switched to clocksource arch_sys_counter
- [ 0.272914] VFS: Disk quotas dquot_6.6.0
- [ 0.273041] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.273240] FS-Cache: Loaded
- [ 0.273439] CacheFiles: Loaded
- [ 0.282693] NET: Registered PF_INET protocol family
- [ 0.282953] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 0.284550] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.284608] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.284694] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.284784] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.284956] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 0.285014] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 0.285289] NET: Registered PF_UNIX/PF_LOCAL protocol family
- [ 0.286321] RPC: Registered named UNIX socket transport module.
- [ 0.286356] RPC: Registered udp transport module.
- [ 0.286383] RPC: Registered tcp transport module.
- [ 0.286410] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.286446] PCI: CLS 0 bytes, default 64
- [ 1.134763] Initialise system trusted keyrings
- [ 1.135057] workingset: timestamp_bits=14 max_order=21 bucket_order=7
- [ 1.144103] zbud: loaded
- [ 1.145983] FS-Cache: Netfs 'nfs' registered for caching
- [ 1.146912] NFS: Registering the id_resolver key type
- [ 1.146970] Key type id_resolver registered
- [ 1.146997] Key type id_legacy registered
- [ 1.147130] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 1.147163] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
- [ 1.148289] Key type asymmetric registered
- [ 1.148320] Asymmetric key parser 'x509' registered
- [ 1.148564] bounce: pool size: 64 pages
- [ 1.148641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 1.148879] io scheduler mq-deadline registered
- [ 1.148911] io scheduler kyber registered
- [ 1.158016] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
- [ 1.158081] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
- [ 1.158195] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
- [ 1.158314] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000
- [ 1.214331] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
- [ 1.214733] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
- [ 1.214769] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 1.214805] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
- [ 1.214916] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
- [ 1.215179] pci 0000:00:00.0: PME# supported from D0 D3hot
- [ 1.218900] PCI: bus0: Fast back to back transfers disabled
- [ 1.219253] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
- [ 1.219399] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
- [ 1.219847] pci 0000:01:00.0: PME# supported from D0 D3hot
- [ 1.223584] PCI: bus1: Fast back to back transfers disabled
- [ 1.223660] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
- [ 1.223703] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
- [ 1.223807] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 1.223846] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
- [ 1.224278] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
- [ 1.224517] pcieport 0000:00:00.0: PME: Signaling with IRQ 81
- [ 1.235346] iproc-rng200 fe104000.rng: hwrng registered
- [ 1.235757] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
- [ 1.237288] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
- [ 1.249971] brd: module loaded
- [ 1.260212] loop: module loaded
- [ 1.260990] Loading iSCSI transport class v2.0-870.
- [ 1.266252] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
- [ 1.362382] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
- [ 1.363602] usbcore: registered new interface driver r8152
- [ 1.363689] usbcore: registered new interface driver lan78xx
- [ 1.363786] usbcore: registered new interface driver smsc95xx
- [ 1.411790] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 1.411854] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
- [ 1.417534] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890
- [ 1.418891] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
- [ 1.418937] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.418976] usb usb1: Product: xHCI Host Controller
- [ 1.419006] usb usb1: Manufacturer: Linux 5.15.24-v7l+ xhci-hcd
- [ 1.419037] usb usb1: SerialNumber: 0000:01:00.0
- [ 1.419792] hub 1-0:1.0: USB hub found
- [ 1.419906] hub 1-0:1.0: 1 port detected
- [ 1.420591] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 1.420634] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
- [ 1.420678] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
- [ 1.421159] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
- [ 1.421202] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.421239] usb usb2: Product: xHCI Host Controller
- [ 1.421269] usb usb2: Manufacturer: Linux 5.15.24-v7l+ xhci-hcd
- [ 1.421299] usb usb2: SerialNumber: 0000:01:00.0
- [ 1.422055] hub 2-0:1.0: USB hub found
- [ 1.422140] hub 2-0:1.0: 4 ports detected
- [ 1.423980] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 1.424377] dwc_otg: FIQ enabled
- [ 1.424392] dwc_otg: NAK holdoff enabled
- [ 1.424405] dwc_otg: FIQ split-transaction FSM enabled
- [ 1.424423] Module dwc_common_port init
- [ 1.424865] usbcore: registered new interface driver uas
- [ 1.425009] usbcore: registered new interface driver usb-storage
- [ 1.425219] mousedev: PS/2 mouse device common for all mice
- [ 1.430760] sdhci: Secure Digital Host Controller Interface driver
- [ 1.430798] sdhci: Copyright(c) Pierre Ossman
- [ 1.431557] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.435428] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.435783] hid: raw HID events driver (C) Jiri Kosina
- [ 1.435982] usbcore: registered new interface driver usbhid
- [ 1.436014] usbhid: USB HID core driver
- [ 1.441687] Initializing XFRM netlink socket
- [ 1.441749] NET: Registered PF_PACKET protocol family
- [ 1.441908] Key type dns_resolver registered
- [ 1.442554] Registering SWP/SWPB emulation handler
- [ 1.443380] registered taskstats version 1
- [ 1.443424] Loading compiled-in X.509 certificates
- [ 1.444307] Key type ._fscrypt registered
- [ 1.444338] Key type .fscrypt registered
- [ 1.444365] Key type fscrypt-provisioning registered
- [ 1.456672] uart-pl011 fe201000.serial: there is not valid maps for state default
- [ 1.457022] uart-pl011 fe201000.serial: cts_event_workaround enabled
- [ 1.457168] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 38, base_baud = 0) is a PL011 rev2
- [ 1.466520] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
- [ 1.467040] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
- [ 1.468336] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
- [ 1.468373] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
- [ 1.497538] of_cfs_init
- [ 1.497786] of_cfs_init: OK
- [ 1.533244] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
- [ 1.533665] Waiting for root device PARTUUID=bba11c34-02...
- [ 1.585951] mmc1: new high speed SDIO card at address 0001
- [ 1.637197] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
- [ 1.638204] mmcblk0: mmc0:aaaa SH128 119 GiB
- [ 1.641991] mmcblk0: p1 p2
- [ 1.642567] mmcblk0: mmc0:aaaa SH128 119 GiB
- [ 1.678066] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
- [ 1.678182] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 1.683975] devtmpfs: mounted
- [ 1.695380] Freeing unused kernel image (initmem) memory: 2048K
- [ 1.702285] usb 1-1: new high-speed USB device number 2 using xhci_hcd
- [ 1.702848] Run /sbin/init as init process
- [ 1.702877] with arguments:
- [ 1.702890] /sbin/init
- [ 1.702903] with environment:
- [ 1.702916] HOME=/
- [ 1.702929] TERM=linux
- [ 1.884926] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
- [ 1.884985] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 1.885022] usb 1-1: Product: USB2.0 Hub
- [ 1.887183] hub 1-1:1.0: USB hub found
- [ 1.887536] hub 1-1:1.0: 4 ports detected
- [ 2.129024] systemd[1]: System time before build time, advancing clock.
- [ 2.212299] usb 1-1.2: new high-speed USB device number 3 using xhci_hcd
- [ 2.231728] NET: Registered PF_INET6 protocol family
- [ 2.233444] Segment Routing with IPv6
- [ 2.233505] In-situ OAM (IOAM) with IPv6
- [ 2.293448] systemd[1]: systemd 247.3-6+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
- [ 2.294365] systemd[1]: Detected architecture arm.
- [ 2.309310] systemd[1]: Set hostname to <3dprinters>.
- [ 2.342982] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
- [ 2.343038] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.343077] usb 1-1.2: Product: USB 2.0 Hub
- [ 2.345349] hub 1-1.2:1.0: USB hub found
- [ 2.345516] hub 1-1.2:1.0: 4 ports detected
- [ 2.772290] usb 1-1.2.4: new high-speed USB device number 4 using xhci_hcd
- [ 3.002957] usb 1-1.2.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
- [ 3.003016] usb 1-1.2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.003056] usb 1-1.2.4: Product: USB 2.0 Hub
- [ 3.005333] hub 1-1.2.4:1.0: USB hub found
- [ 3.005495] hub 1-1.2.4:1.0: 4 ports detected
- [ 3.250767] systemd[1]: Queued start job for default target Graphical Interface.
- [ 3.252952] random: systemd: uninitialized urandom read (16 bytes read)
- [ 3.255792] systemd[1]: Created slice system-getty.slice.
- [ 3.256498] random: systemd: uninitialized urandom read (16 bytes read)
- [ 3.257625] systemd[1]: Created slice system-modprobe.slice.
- [ 3.258089] random: systemd: uninitialized urandom read (16 bytes read)
- [ 3.259081] systemd[1]: Created slice system-systemd\x2dfsck.slice.
- [ 3.260332] systemd[1]: Created slice User and Session Slice.
- [ 3.261145] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 3.261933] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 3.263380] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 3.264035] systemd[1]: Reached target Local Encrypted Volumes.
- [ 3.264800] systemd[1]: Reached target Paths.
- [ 3.265343] systemd[1]: Reached target Slices.
- [ 3.265873] systemd[1]: Reached target Swap.
- [ 3.267334] systemd[1]: Listening on Syslog Socket.
- [ 3.268419] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 3.269178] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ 3.270595] systemd[1]: Listening on Journal Audit Socket.
- [ 3.271690] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 3.273363] systemd[1]: Listening on Journal Socket.
- [ 3.275960] systemd[1]: Listening on udev Control Socket.
- [ 3.277153] systemd[1]: Listening on udev Kernel Socket.
- [ 3.278392] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- [ 3.283519] systemd[1]: Mounting POSIX Message Queue File System...
- [ 3.290032] systemd[1]: Mounting RPC Pipe File System...
- [ 3.298299] systemd[1]: Mounting Kernel Debug File System...
- [ 3.306782] systemd[1]: Mounting Kernel Trace File System...
- [ 3.308228] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
- [ 3.319377] systemd[1]: Starting Restore / save the current clock...
- [ 3.329746] systemd[1]: Starting Set the console keyboard layout...
- [ 3.338656] systemd[1]: Starting Create list of static device nodes for the current kernel...
- [ 3.346296] systemd[1]: Starting Load Kernel Module configfs...
- [ 3.354287] systemd[1]: Starting Load Kernel Module drm...
- [ 3.363912] systemd[1]: Starting Load Kernel Module fuse...
- [ 3.368179] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- [ 3.375775] systemd[1]: Starting File System Check on Root Device...
- [ 3.388955] systemd[1]: Starting Journal Service...
- [ 3.399501] systemd[1]: Starting Load Kernel Modules...
- [ 3.407113] systemd[1]: Starting Coldplug All udev Devices...
- [ 3.422295] usb 1-1.2.4.1: new high-speed USB device number 5 using xhci_hcd
- [ 3.422826] systemd[1]: Mounted POSIX Message Queue File System.
- [ 3.423786] systemd[1]: Mounted RPC Pipe File System.
- [ 3.424787] systemd[1]: Mounted Kernel Debug File System.
- [ 3.425987] systemd[1]: Mounted Kernel Trace File System.
- [ 3.428559] systemd[1]: Finished Create list of static device nodes for the current kernel.
- [ 3.431457] systemd[1]: modprobe@configfs.service: Succeeded.
- [ 3.433277] systemd[1]: Finished Load Kernel Module configfs.
- [ 3.440861] systemd[1]: Mounting Kernel Configuration File System...
- [ 3.442906] fuse: init (API version 7.34)
- [ 3.448869] systemd[1]: Started File System Check Daemon to report status.
- [ 3.473214] systemd[1]: modprobe@fuse.service: Succeeded.
- [ 3.474999] systemd[1]: Finished Load Kernel Module fuse.
- [ 3.495236] systemd[1]: Mounting FUSE Control File System...
- [ 3.498927] systemd[1]: Finished Restore / save the current clock.
- [ 3.528446] systemd[1]: Finished Load Kernel Modules.
- [ 3.539298] systemd[1]: modprobe@drm.service: Succeeded.
- [ 3.540753] systemd[1]: Finished Load Kernel Module drm.
- [ 3.542038] systemd[1]: Mounted Kernel Configuration File System.
- [ 3.543064] systemd[1]: Mounted FUSE Control File System.
- [ 3.556177] systemd[1]: Starting Apply Kernel Variables...
- [ 3.628141] systemd[1]: Finished Apply Kernel Variables.
- [ 3.742002] usb 1-1.2.4.1: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00
- [ 3.742035] usb 1-1.2.4.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 3.742055] usb 1-1.2.4.1: Product: USB 2.0 Camera
- [ 3.742073] usb 1-1.2.4.1: Manufacturer: Sonix Technology Co., Ltd.
- [ 3.742091] usb 1-1.2.4.1: SerialNumber: SN0001
- [ 3.786035] systemd[1]: Started Journal Service.
- [ 3.942270] usb 1-1.2.4.3: new high-speed USB device number 6 using xhci_hcd
- [ 4.006454] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
- [ 4.083090] systemd-journald[135]: Received client request to flush runtime journal.
- [ 4.103502] systemd-journald[135]: File /var/log/journal/3e23e34d17484a28b9473f69f7d9d21c/system.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 4.183444] usb 1-1.2.4.3: New USB device found, idVendor=0c45, idProduct=636d, bcdDevice= 1.00
- [ 4.183478] usb 1-1.2.4.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 4.183499] usb 1-1.2.4.3: Product: USB 2.0 Camera
- [ 4.183517] usb 1-1.2.4.3: Manufacturer: Sonix Technology Co., Ltd.
- [ 4.183534] usb 1-1.2.4.3: SerialNumber: SN0001
- [ 4.330425] loop0: detected capacity change from 0 to 191600
- [ 4.393790] loop1: detected capacity change from 0 to 94048
- [ 4.412320] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 4.462787] loop2: detected capacity change from 0 to 536
- [ 5.442391] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
- [ 5.445015] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
- [ 5.445043] [vc_sm_connected_init]: start
- [ 5.452927] mc: Linux media interface: v0.10
- [ 5.454360] [vc_sm_connected_init]: installed successfully
- [ 5.468740] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
- [ 5.469646] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
- [ 5.480586] videodev: Linux video capture interface: v2.00
- [ 5.559506] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
- [ 5.561384] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
- [ 5.598800] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
- [ 5.601327] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
- [ 5.629451] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
- [ 5.638264] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
- [ 5.648913] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
- [ 5.658820] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
- [ 5.666537] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
- [ 5.666574] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
- [ 5.666600] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
- [ 5.666623] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
- [ 5.666646] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
- [ 5.697683] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
- [ 5.708482] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
- [ 5.713072] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
- [ 5.713124] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
- [ 5.713341] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
- [ 5.728988] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
- [ 5.729042] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
- [ 5.737734] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
- [ 5.737774] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
- [ 5.737800] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
- [ 5.737823] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
- [ 5.737846] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
- [ 5.748836] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
- [ 5.749414] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
- [ 5.749463] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
- [ 5.771522] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
- [ 5.771580] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
- [ 5.823779] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
- [ 5.999354] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 6.057240] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 6.064258] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
- [ 6.066366] Registered IR keymap rc-cec
- [ 6.066563] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
- [ 6.066814] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
- [ 6.132643] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
- [ 6.143726] brcmfmac: F1 signature read @0x18000000=0x15264345
- [ 6.155137] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
- [ 6.155999] usbcore: registered new interface driver brcmfmac
- [ 6.159788] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
- [ 6.206729] usb 1-1.2.4.1: 3:1: cannot get freq at ep 0x84
- [ 6.239830] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
- [ 6.276748] usb 1-1.2.4.1: Found UVC 1.00 device USB 2.0 Camera (0c45:6366)
- [ 6.277407] Registered IR keymap rc-cec
- [ 6.277586] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
- [ 6.277828] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input1
- [ 6.278049] usb 1-1.2.4.1: Failed to query (GET_INFO) UVC control 5 on unit 1: 0 (exp. 1).
- [ 6.278536] usb 1-1.2.4.1: Failed to query (GET_INFO) UVC control 7 on unit 1: 0 (exp. 1).
- [ 6.278795] usb 1-1.2.4.1: Failed to query (GET_INFO) UVC control 9 on unit 1: 0 (exp. 1).
- [ 6.279144] usb 1-1.2.4.1: Failed to query (GET_INFO) UVC control 12 on unit 1: 0 (exp. 1).
- [ 6.296197] input: USB 2.0 Camera: USB 2.0 Camera as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.1/1-1.2.4.1:1.0/input/input2
- [ 6.322306] usb 1-1.2.4.3: 3:1: cannot get freq at ep 0x84
- [ 6.369054] usbcore: registered new interface driver snd-usb-audio
- [ 6.393578] usb 1-1.2.4.3: Found UVC 1.00 device USB 2.0 Camera (0c45:636d)
- [ 6.400317] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
- [ 6.401767] input: USB 2.0 Camera: USB 2.0 Camera as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.3/1-1.2.4.3:1.0/input/input3
- [ 6.402041] Registered IR keymap rc-cec
- [ 6.402245] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
- [ 6.402319] usbcore: registered new interface driver uvcvideo
- [ 6.402489] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input4
- [ 6.482197] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
- [ 6.482505] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
- [ 6.501638] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
- [ 6.531888] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
- [ 6.554850] Registered IR keymap rc-cec
- [ 6.555054] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
- [ 6.555277] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input5
- [ 6.758195] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
- [ 6.759099] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
- [ 6.759650] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
- [ 6.760196] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
- [ 6.773343] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
- [ 6.812129] Registered IR keymap rc-cec
- [ 6.812413] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
- [ 6.812685] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input6
- [ 6.930707] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
- [ 6.969524] Registered IR keymap rc-cec
- [ 6.969723] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
- [ 6.969991] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input7
- [ 7.072309] random: crng init done
- [ 7.072331] random: 7 urandom warning(s) missed due to ratelimiting
- [ 7.288882] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
- [ 7.290892] Registered IR keymap rc-cec
- [ 7.292078] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
- [ 7.292770] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input8
- [ 7.437453] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
- [ 7.440331] Registered IR keymap rc-cec
- [ 7.465954] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
- [ 7.475445] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input9
- [ 7.588055] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
- [ 7.588677] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
- [ 7.589095] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
- [ 7.589512] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
- [ 7.589938] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
- [ 7.590294] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
- [ 7.590725] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
- [ 7.621988] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
- [ 7.622604] vc4-drm gpu: [drm] Cannot find any crtc or sizes
- [ 8.401358] uart-pl011 fe201000.serial: no DMA platform data
- [ 8.424927] 8021q: 802.1Q VLAN Support v1.8
- [ 8.626747] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
- [ 9.047235] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
- [ 9.493970] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
- [ 9.494590] bcmgenet fd580000.ethernet eth0: Link is Down
- [ 10.063285] usb 1-1.2.4.1: Failed to query (GET_DEF) UVC control 12 on unit 1: 0 (exp. 3).
- [ 10.063558] usb 1-1.2.4.1: Failed to query (GET_MIN) UVC control 12 on unit 1: 0 (exp. 3).
- [ 10.063814] usb 1-1.2.4.1: Failed to query (GET_MAX) UVC control 12 on unit 1: 0 (exp. 3).
- [ 10.064067] usb 1-1.2.4.1: Failed to query (GET_RES) UVC control 12 on unit 1: 0 (exp. 3).
- [ 10.064275] usb 1-1.2.4.1: Failed to query (GET_DEF) UVC control 9 on unit 1: 0 (exp. 2).
- [ 10.064534] usb 1-1.2.4.1: Failed to query (GET_MIN) UVC control 9 on unit 1: 0 (exp. 2).
- [ 10.064787] usb 1-1.2.4.1: Failed to query (GET_MAX) UVC control 9 on unit 1: 0 (exp. 2).
- [ 10.065049] usb 1-1.2.4.1: Failed to query (GET_RES) UVC control 9 on unit 1: 0 (exp. 2).
- [ 10.190278] usb 1-1.2.4.1: Failed to query (GET_CUR) UVC control 12 on unit 1: 0 (exp. 3).
- [ 10.190497] usb 1-1.2.4.1: Failed to query (GET_CUR) UVC control 9 on unit 1: 0 (exp. 2).
- [ 11.090060] loop3: detected capacity change from 0 to 8
- [ 13.672512] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 13.672573] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 15.087605] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 16.100245] Bluetooth: Core ver 2.22
- [ 16.100349] NET: Registered PF_BLUETOOTH protocol family
- [ 16.100364] Bluetooth: HCI device and connection manager initialized
- [ 16.100390] Bluetooth: HCI socket layer initialized
- [ 16.100409] Bluetooth: L2CAP socket layer initialized
- [ 16.100444] Bluetooth: SCO socket layer initialized
- [ 16.111468] Bluetooth: HCI UART driver ver 2.3
- [ 16.111495] Bluetooth: HCI UART protocol H4 registered
- [ 16.111586] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 16.111910] Bluetooth: HCI UART protocol Broadcom registered
- [ 16.452498] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 16.452510] Bluetooth: BNEP filters: protocol multicast
- [ 16.452521] Bluetooth: BNEP socket layer initialized
- [ 16.465376] NET: Registered PF_ALG protocol family
- [ 16.483836] cryptd: max_cpu_qlen set to 1000
- [ 18.329347] usb 1-1.2.4.3: USB disconnect, device number 6
- [ 18.331640] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 18.335649] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 18.339789] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 18.343777] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 18.347764] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 18.912261] usb 1-1.2.4.3: new high-speed USB device number 7 using xhci_hcd
- [ 19.562455] usb 1-1.2.4.3: device descriptor read/64, error -71
- [ 19.922712] usb 1-1.2.4.3: New USB device found, idVendor=0c45, idProduct=636d, bcdDevice= 1.00
- [ 19.922726] usb 1-1.2.4.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 19.922733] usb 1-1.2.4.3: Product: USB 2.0 Camera
- [ 19.922740] usb 1-1.2.4.3: Manufacturer: Sonix Technology Co., Ltd.
- [ 19.922745] usb 1-1.2.4.3: SerialNumber: SN0001
- [ 19.924811] usb 1-1.2.4.3: Found UVC 1.00 device USB 2.0 Camera (0c45:636d)
- [ 19.930939] input: USB 2.0 Camera: USB 2.0 Camera as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.3/1-1.2.4.3:1.0/input/input10
- [ 19.935802] usb 1-1.2.4.3: 3:1: cannot get freq at ep 0x84
- [ 20.492377] usb 1-1.2.4.1: Failed to query (GET_CUR) UVC control 12 on unit 1: 0 (exp. 3).
- [ 20.492614] usb 1-1.2.4.1: Failed to query (GET_CUR) UVC control 9 on unit 1: 0 (exp. 2).
- [ 22.681977] usb 1-1.2.4.3: USB disconnect, device number 7
- [ 22.684606] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 22.688599] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 22.692608] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 22.696618] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 22.700595] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 23.192682] usb 1-1.2.4.3: new high-speed USB device number 8 using xhci_hcd
- [ 23.433578] usb 1-1.2.4.3: New USB device found, idVendor=0c45, idProduct=636d, bcdDevice= 1.00
- [ 23.433610] usb 1-1.2.4.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 23.433631] usb 1-1.2.4.3: Product: USB 2.0 Camera
- [ 23.433649] usb 1-1.2.4.3: Manufacturer: Sonix Technology Co., Ltd.
- [ 23.433666] usb 1-1.2.4.3: SerialNumber: SN0001
- [ 23.436588] usb 1-1.2.4.3: Found UVC 1.00 device USB 2.0 Camera (0c45:636d)
- [ 23.453677] input: USB 2.0 Camera: USB 2.0 Camera as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.3/1-1.2.4.3:1.0/input/input11
- [ 23.459528] usb 1-1.2.4.3: 3:1: cannot get freq at ep 0x84
- [ 24.007245] usb 1-1.2.4.1: Failed to query (GET_CUR) UVC control 12 on unit 1: 0 (exp. 3).
- [ 24.007451] usb 1-1.2.4.1: Failed to query (GET_CUR) UVC control 9 on unit 1: 0 (exp. 2).
- [ 31.833908] cam-dummy-reg: disabling
- [ 31.833943] cam1-reg: disabling
- [ 63.605393] usb 1-1.4: new full-speed USB device number 9 using xhci_hcd
- [ 63.741513] usb 1-1.4: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64
- [ 63.741541] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 63.741559] usb 1-1.4: Product: USB Serial
- [ 63.851575] usbcore: registered new interface driver usbserial_generic
- [ 63.852889] usbserial: USB Serial support registered for generic
- [ 63.855222] usbcore: registered new interface driver ch341
- [ 63.855279] usbserial: USB Serial support registered for ch341-uart
- [ 63.855413] ch341 1-1.4:1.0: ch341-uart converter detected
- [ 63.861192] usb 1-1.4: ch341-uart converter now attached to ttyUSB0
- [ 199.042680] usb 1-1.3: new full-speed USB device number 10 using xhci_hcd
- [ 199.188759] usb 1-1.3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64
- [ 199.188787] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 199.188804] usb 1-1.3: Product: USB Serial
- [ 199.207555] ch341 1-1.3:1.0: ch341-uart converter detected
- [ 199.215180] usb 1-1.3: ch341-uart converter now attached to ttyUSB1
- [ 1189.571193] usb 1-1.2.4.1: reset high-speed USB device number 5 using xhci_hcd
- [ 2196.048649] usb 1-1.2.4.1: reset high-speed USB device number 5 using xhci_hcd
- [ 2871.994433] usb 1-1.2.4.1: reset high-speed USB device number 5 using xhci_hcd
- [ 4247.679417] usb 1-1.2.4.1: reset high-speed USB device number 5 using xhci_hcd
- [ 4542.285252] usb 1-1.2: USB disconnect, device number 3
- [ 4542.285287] usb 1-1.2.4: USB disconnect, device number 4
- [ 4542.285312] usb 1-1.2.4.1: USB disconnect, device number 5
- [ 4542.436323] usb 1-1.2.4.3: USB disconnect, device number 8
- [ 4542.674596] usb 1-1.2: new high-speed USB device number 11 using xhci_hcd
- [ 4542.805103] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
- [ 4542.805117] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 4542.805124] usb 1-1.2: Product: USB 2.0 Hub
- [ 4542.806196] hub 1-1.2:1.0: USB hub found
- [ 4542.806277] hub 1-1.2:1.0: 4 ports detected
- [ 4543.224723] usb 1-1.2.4: new high-speed USB device number 12 using xhci_hcd
- [ 4543.455335] usb 1-1.2.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
- [ 4543.455367] usb 1-1.2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 4543.455388] usb 1-1.2.4: Product: USB 2.0 Hub
- [ 4543.457082] hub 1-1.2.4:1.0: USB hub found
- [ 4543.457225] hub 1-1.2.4:1.0: 4 ports detected
- [ 4543.874654] usb 1-1.2.4.1: new high-speed USB device number 13 using xhci_hcd
- [ 4544.192910] usb 1-1.2.4.1: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00
- [ 4544.192942] usb 1-1.2.4.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 4544.192962] usb 1-1.2.4.1: Product: USB 2.0 Camera
- [ 4544.192980] usb 1-1.2.4.1: Manufacturer: Sonix Technology Co., Ltd.
- [ 4544.192997] usb 1-1.2.4.1: SerialNumber: SN0001
- [ 4544.196655] usb 1-1.2.4.1: Found UVC 1.00 device USB 2.0 Camera (0c45:6366)
- [ 4544.197498] usb 1-1.2.4.1: Failed to query (GET_INFO) UVC control 5 on unit 1: 0 (exp. 1).
- [ 4544.197914] usb 1-1.2.4.1: Failed to query (GET_INFO) UVC control 7 on unit 1: 0 (exp. 1).
- [ 4544.198122] usb 1-1.2.4.1: Failed to query (GET_INFO) UVC control 9 on unit 1: 0 (exp. 1).
- [ 4544.198351] usb 1-1.2.4.1: Failed to query (GET_INFO) UVC control 12 on unit 1: 0 (exp. 1).
- [ 4544.213167] input: USB 2.0 Camera: USB 2.0 Camera as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.1/1-1.2.4.1:1.0/input/input12
- [ 4544.386041] usb 1-1.2.4.1: 3:1: cannot get freq at ep 0x84
- [ 4544.594686] usb 1-1.2.4.3: new high-speed USB device number 14 using xhci_hcd
- [ 4544.766199] usb 1-1.2.4.1: Failed to query (GET_DEF) UVC control 12 on unit 1: 0 (exp. 3).
- [ 4544.766354] usb 1-1.2.4.1: Failed to query (GET_MIN) UVC control 12 on unit 1: 0 (exp. 3).
- [ 4544.766536] usb 1-1.2.4.1: Failed to query (GET_MAX) UVC control 12 on unit 1: 0 (exp. 3).
- [ 4544.766701] usb 1-1.2.4.1: Failed to query (GET_RES) UVC control 12 on unit 1: 0 (exp. 3).
- [ 4544.766859] usb 1-1.2.4.1: Failed to query (GET_DEF) UVC control 9 on unit 1: 0 (exp. 2).
- [ 4544.767029] usb 1-1.2.4.1: Failed to query (GET_MIN) UVC control 9 on unit 1: 0 (exp. 2).
- [ 4544.767194] usb 1-1.2.4.1: Failed to query (GET_MAX) UVC control 9 on unit 1: 0 (exp. 2).
- [ 4544.767360] usb 1-1.2.4.1: Failed to query (GET_RES) UVC control 9 on unit 1: 0 (exp. 2).
- [ 4544.826240] usb 1-1.2.4.1: Failed to query (GET_CUR) UVC control 12 on unit 1: 0 (exp. 3).
- [ 4544.826440] usb 1-1.2.4.1: Failed to query (GET_CUR) UVC control 9 on unit 1: 0 (exp. 2).
- [ 4544.835729] usb 1-1.2.4.3: New USB device found, idVendor=0c45, idProduct=636d, bcdDevice= 1.00
- [ 4544.835743] usb 1-1.2.4.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 4544.835750] usb 1-1.2.4.3: Product: USB 2.0 Camera
- [ 4544.835756] usb 1-1.2.4.3: Manufacturer: Sonix Technology Co., Ltd.
- [ 4544.835762] usb 1-1.2.4.3: SerialNumber: SN0001
- [ 4544.975266] usb 1-1.2.4.3: Found UVC 1.00 device USB 2.0 Camera (0c45:636d)
- [ 4544.982274] input: USB 2.0 Camera: USB 2.0 Camera as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.3/1-1.2.4.3:1.0/input/input13
- [ 4544.987716] usb 1-1.2.4.3: 3:1: cannot get freq at ep 0x84
- [ 4545.627699] usb 1-1.2.4.1: Failed to query (GET_CUR) UVC control 12 on unit 1: 0 (exp. 3).
- [ 4545.627926] usb 1-1.2.4.1: Failed to query (GET_CUR) UVC control 9 on unit 1: 0 (exp. 2).
- [ 8608.271343] usb 1-1.2.4.1: USB disconnect, device number 13
- [ 8608.272440] uvcvideo 1-1.2.4.1:1.1: Failed to resubmit video URB (-19).
- [ 8608.276674] uvcvideo 1-1.2.4.1:1.1: Failed to resubmit video URB (-19).
- [ 8608.280688] uvcvideo 1-1.2.4.1:1.1: Failed to resubmit video URB (-19).
- [ 8608.284653] uvcvideo 1-1.2.4.1:1.1: Failed to resubmit video URB (-19).
- [ 8608.288640] uvcvideo 1-1.2.4.1:1.1: Failed to resubmit video URB (-19).
- [ 8609.807535] usb 1-1.2.4.3: USB disconnect, device number 14
- [ 8609.808884] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 8609.812932] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 8609.816916] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 8609.820921] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 8609.824916] uvcvideo 1-1.2.4.3:1.1: Failed to resubmit video URB (-19).
- [ 8609.907870] xhci_hcd 0000:01:00.0: ERROR Transfer event for disabled endpoint slot 5 ep 2
- [ 8609.907894] xhci_hcd 0000:01:00.0: @000000041ad068d0 00000000 00000000 0f000000 05038000
- [17774.418554] ch341-uart ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32
- [17774.418761] ch341-uart ttyUSB1: usb_serial_generic_read_bulk_callback - urb stopped: -32
- [17774.452527] usb 1-1.2: USB disconnect, device number 11
- [17774.452558] usb 1-1.2.4: USB disconnect, device number 12
- [17787.802887] usb 1-1.2: new high-speed USB device number 15 using xhci_hcd
- [17787.943940] usb 1-1.2: New USB device found, idVendor=0c45, idProduct=636d, bcdDevice= 1.00
- [17787.943971] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [17787.943992] usb 1-1.2: Product: USB 2.0 Camera
- [17787.944010] usb 1-1.2: Manufacturer: Sonix Technology Co., Ltd.
- [17787.944027] usb 1-1.2: SerialNumber: SN0001
- [17787.946866] usb 1-1.2: Found UVC 1.00 device USB 2.0 Camera (0c45:636d)
- [17787.954925] input: USB 2.0 Camera: USB 2.0 Camera as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input14
- [17787.960596] usb 1-1.2: 3:1: cannot get freq at ep 0x84
- [17798.562996] usb 1-1.1: new high-speed USB device number 16 using xhci_hcd
- [17798.975709] usb 1-1.1: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00
- [17798.975742] usb 1-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [17798.975763] usb 1-1.1: Product: USB 2.0 Camera
- [17798.975781] usb 1-1.1: Manufacturer: Sonix Technology Co., Ltd.
- [17798.975798] usb 1-1.1: SerialNumber: SN0001
- [17798.979479] usb 1-1.1: Found UVC 1.00 device USB 2.0 Camera (0c45:6366)
- [17798.980452] usb 1-1.1: Failed to query (GET_INFO) UVC control 5 on unit 1: 0 (exp. 1).
- [17798.980898] usb 1-1.1: Failed to query (GET_INFO) UVC control 7 on unit 1: 0 (exp. 1).
- [17798.981356] usb 1-1.1: Failed to query (GET_INFO) UVC control 9 on unit 1: 0 (exp. 1).
- [17798.981577] usb 1-1.1: Failed to query (GET_INFO) UVC control 12 on unit 1: 0 (exp. 1).
- [17798.996531] input: USB 2.0 Camera: USB 2.0 Camera as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input15
- [17799.169424] usb 1-1.1: 3:1: cannot get freq at ep 0x84
- [17799.677060] usb 1-1.1: Failed to query (GET_DEF) UVC control 12 on unit 1: 0 (exp. 3).
- [17799.677247] usb 1-1.1: Failed to query (GET_MIN) UVC control 12 on unit 1: 0 (exp. 3).
- [17799.677404] usb 1-1.1: Failed to query (GET_MAX) UVC control 12 on unit 1: 0 (exp. 3).
- [17799.677576] usb 1-1.1: Failed to query (GET_RES) UVC control 12 on unit 1: 0 (exp. 3).
- [17799.677744] usb 1-1.1: Failed to query (GET_DEF) UVC control 9 on unit 1: 0 (exp. 2).
- [17799.677904] usb 1-1.1: Failed to query (GET_MIN) UVC control 9 on unit 1: 0 (exp. 2).
- [17799.678074] usb 1-1.1: Failed to query (GET_MAX) UVC control 9 on unit 1: 0 (exp. 2).
- [17799.678246] usb 1-1.1: Failed to query (GET_RES) UVC control 9 on unit 1: 0 (exp. 2).
- [17799.738014] usb 1-1.1: Failed to query (GET_CUR) UVC control 12 on unit 1: 0 (exp. 3).
- [17799.738180] usb 1-1.1: Failed to query (GET_CUR) UVC control 9 on unit 1: 0 (exp. 2).
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement