Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ################################################################################
- # ... output of lspci -vvvvnn
- # LibreELEC release: Generic.x86_64-8.0.0
- #
- ################################################################################
- 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge [1022:9600]
- Subsystem: Dell RS780 Host Bridge [1028:02e2]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- Latency: 0
- NUMA node: 0
- Capabilities: [c4] HyperTransport: Slave or Primary Interface
- Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b-
- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
- Revision ID: 3.00
- Link Frequency 0: [a]
- Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
- Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
- Link Frequency 1: 200MHz
- Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
- Prefetchable memory behind bridge Upper: 00-00
- Bus Number: 00
- Capabilities: [54] HyperTransport: UnitID Clumping
- Capabilities: [40] HyperTransport: Retry Mode
- Capabilities: [9c] HyperTransport: #1a
- Capabilities: [f8] HyperTransport: #1c
- 00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 24
- NUMA node: 0
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
- I/O behind bridge: 0000d000-0000dfff
- Memory behind bridge: fe700000-fe7fffff
- Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0
- ExtTag+ RBE+
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
- ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
- Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet+ LinkState+
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
- RootCap: CRSVisible+
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 41b1
- Capabilities: [b0] Subsystem: Dell RS780 PCI to PCI bridge (ext gfx port 0) [1028:02e2]
- Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
- Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
- Capabilities: [110 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- Kernel driver in use: pcieport
- 00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 25
- NUMA node: 0
- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- I/O behind bridge: 0000f000-00000fff
- Memory behind bridge: fe800000-fe9fffff
- Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0
- ExtTag+ RBE+
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
- ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
- Slot #6, PowerLimit 25.000W; Interlock- NoCompl+
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet+ LinkState+
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
- RootCap: CRSVisible+
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 41c1
- Capabilities: [b0] Subsystem: Dell RS780 PCI to PCI bridge (PCIE port 2) [1028:02e2]
- Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
- Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
- Capabilities: [110 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- Kernel driver in use: pcieport
- 00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 26
- NUMA node: 0
- Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
- I/O behind bridge: 0000e000-0000efff
- Memory behind bridge: feb00000-febfffff
- Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0
- ExtTag+ RBE+
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
- ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
- Slot #7, PowerLimit 25.000W; Interlock- NoCompl+
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet+ LinkState+
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
- RootCap: CRSVisible+
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 41e1
- Capabilities: [b0] Subsystem: Dell RS780/RS880 PCI to PCI bridge (PCIE port 3) [1028:02e2]
- Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
- Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
- Capabilities: [110 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- Kernel driver in use: pcieport
- 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
- Subsystem: Dell SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1028:02e2]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 22
- NUMA node: 0
- Region 0: I/O ports at c000 [size=8]
- Region 1: I/O ports at b000 [size=4]
- Region 2: I/O ports at a000 [size=8]
- Region 3: I/O ports at 9000 [size=4]
- Region 4: I/O ports at 8000 [size=16]
- Region 5: Memory at fe6ff800 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [60] Power Management version 2
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [70] SATA HBA v1.0 InCfgSpace
- Kernel driver in use: ahci
- 00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
- Subsystem: Dell SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1028:02e2]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 16
- NUMA node: 0
- Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K]
- Kernel driver in use: ohci-pci
- 00:12.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
- Subsystem: Dell SB7x0 USB OHCI1 Controller [1028:02e2]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 16
- NUMA node: 0
- Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K]
- Kernel driver in use: ohci-pci
- 00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
- Subsystem: Dell SB7x0/SB8x0/SB9x0 USB EHCI Controller [1028:02e2]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin B routed to IRQ 17
- NUMA node: 0
- Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=256]
- Capabilities: [c0] Power Management version 2
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Bridge: PM- B3+
- Capabilities: [e4] Debug port: BAR=1 offset=00e0
- Kernel driver in use: ehci-pci
- 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
- Subsystem: Dell SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1028:02e2]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 18
- NUMA node: 0
- Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K]
- Kernel driver in use: ohci-pci
- 00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
- Subsystem: Dell SB7x0 USB OHCI1 Controller [1028:02e2]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 18
- NUMA node: 0
- Region 0: Memory at fe6fb000 (32-bit, non-prefetchable) [size=4K]
- Kernel driver in use: ohci-pci
- 00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
- Subsystem: Dell SB7x0/SB8x0/SB9x0 USB EHCI Controller [1028:02e2]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin B routed to IRQ 19
- NUMA node: 0
- Region 0: Memory at fe6fa800 (32-bit, non-prefetchable) [size=256]
- Capabilities: [c0] Power Management version 2
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Bridge: PM- B3+
- Capabilities: [e4] Debug port: BAR=1 offset=00e0
- Kernel driver in use: ehci-pci
- 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 3a)
- Subsystem: Dell SBx00 SMBus Controller [1028:02e2]
- Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR+ INTx-
- NUMA node: 0
- Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
- Kernel driver in use: piix4_smbus
- 00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
- Subsystem: Dell SB7x0/SB8x0/SB9x0 IDE Controller [1028:02e2]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64
- Interrupt: pin A routed to IRQ 16
- NUMA node: 0
- Region 0: I/O ports at 01f0 [size=8]
- Region 1: I/O ports at 03f4
- Region 2: I/O ports at 0170 [size=8]
- Region 3: I/O ports at 0374
- Region 4: I/O ports at ff00 [size=16]
- Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit-
- Address: 00000000 Data: 0000
- Kernel driver in use: pata_atiixp
- 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383]
- Subsystem: Dell SBx00 Azalia (Intel HDA) [1028:02e2]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 16
- NUMA node: 0
- Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: snd_hda_intel
- Kernel modules: snd_hda_intel
- 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
- Subsystem: Dell SB7x0/SB8x0/SB9x0 LPC host controller [1028:02e2]
- Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- NUMA node: 0
- 00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64
- NUMA node: 0
- Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
- I/O behind bridge: 0000f000-00000fff
- Memory behind bridge: fff00000-000fffff
- Prefetchable memory behind bridge: fff00000-000fffff
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- NUMA node: 0
- Capabilities: [80] HyperTransport: Host or Secondary Interface
- Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
- Revision ID: 3.00
- Link Frequency: [a]
- Link Error: <Prot- <Ovfl- <EOC- CTLTm-
- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
- 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- NUMA node: 0
- 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- NUMA node: 0
- 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- NUMA node: 0
- Capabilities: [f0] Secure device <?>
- Kernel modules: k10temp
- 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- NUMA node: 0
- 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV710 [Radeon HD 4350/4550] [1002:954f] (prog-if 00 [VGA controller])
- Subsystem: Dell RV710 [Radeon HD 4350/4550] [1028:904e]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 27
- NUMA node: 0
- Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
- Region 2: Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K]
- Region 4: I/O ports at d000 [size=256]
- Expansion ROM at 000c0000 [disabled] [size=128K]
- Capabilities: [50] Power Management version 3
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
- ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
- ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0100c Data: 4122
- Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
- Kernel driver in use: radeon
- 01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series] [1002:aa38]
- Subsystem: Dell RV710/730 HDMI Audio [Radeon HD 4000 series] [1028:aa38]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin B routed to IRQ 29
- NUMA node: 0
- Region 0: Memory at fe7ec000 (64-bit, non-prefetchable) [size=16K]
- Capabilities: [50] Power Management version 3
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
- ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
- ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0300c Data: 4192
- Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
- Kernel driver in use: snd_hda_intel
- Kernel modules: snd_hda_intel
- 02:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 04)
- Subsystem: DVBSky CX23885 PCI Video and Audio Decoder [4254:2800]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 18
- NUMA node: 0
- Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=2M]
- Capabilities: [40] Express (v1) Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- SlotPowerLimit 25.000W
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <4us
- ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [80] Power Management version 2
- Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [90] Vital Product Data
- Product Name: "
- End
- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: 0000000000000000 Data: 0000
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
- Capabilities: [200 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32+ WRR64+ WRR128-
- Ctrl: ArbSelect=WRR64
- Status: InProgress-
- Port Arbitration Table [240] <?>
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- Kernel driver in use: cx23885
- Kernel modules: cx23885
- 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 02)
- Subsystem: Dell RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [1028:02e2]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 28
- NUMA node: 0
- Region 0: I/O ports at e800 [size=256]
- Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
- Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K]
- Expansion ROM at febe0000 [disabled] [size=128K]
- Capabilities: [40] Power Management version 3
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0100c Data: 4162
- Capabilities: [70] Express (v2) Endpoint, MSI 01
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 25.000W
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
- ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
- Vector table: BAR=4 offset=00000000
- PBA: BAR=4 offset=00000800
- Capabilities: [cc] Vital Product Data
- Not readable
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
- Capabilities: [140 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- Capabilities: [160 v1] Device Serial Number 5b-00-00-00-ff-ff-00-00
- Kernel driver in use: r8169
- ################################################################################
- # ... output of lsusb -vvv
- # LibreELEC release: Generic.x86_64-8.0.0
- #
- ################################################################################
- Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0002 2.0 root hub
- bcdDevice 4.09
- iManufacturer 3 Linux 4.9.8 ehci_hcd
- iProduct 2 EHCI Host Controller
- iSerial 1 0000:00:13.2
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0004 1x 4 bytes
- bInterval 12
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 6
- wHubCharacteristic 0x000a
- No power switching (usb 1.0)
- Per-port overcurrent protection
- bPwrOn2PwrGood 10 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Port 2: 0000.0100 power
- Port 3: 0000.0100 power
- Port 4: 0000.0100 power
- Port 5: 0000.0100 power
- Port 6: 0000.0100 power
- Device Status: 0x0001
- Self Powered
- Bus 006 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 0
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 8
- idVendor 0x046d Logitech, Inc.
- idProduct 0xc31c Keyboard K120
- bcdDevice 64.00
- iManufacturer 1 Logitech
- iProduct 2 USB Keyboard
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 59
- bNumInterfaces 2
- bConfigurationValue 1
- iConfiguration 3 U64.00_B0001
- bmAttributes 0xa0
- (Bus Powered)
- Remote Wakeup
- MaxPower 90mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 3 Human Interface Device
- bInterfaceSubClass 1 Boot Interface Subclass
- bInterfaceProtocol 1 Keyboard
- iInterface 2 USB Keyboard
- HID Device Descriptor:
- bLength 9
- bDescriptorType 33
- bcdHID 1.10
- bCountryCode 0 Not supported
- bNumDescriptors 1
- bDescriptorType 34 Report
- wDescriptorLength 65
- Report Descriptors:
- ** UNAVAILABLE **
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0008 1x 8 bytes
- bInterval 10
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 1
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 3 Human Interface Device
- bInterfaceSubClass 0
- bInterfaceProtocol 0
- iInterface 2 USB Keyboard
- HID Device Descriptor:
- bLength 9
- bDescriptorType 33
- bcdHID 1.10
- bCountryCode 0 Not supported
- bNumDescriptors 1
- bDescriptorType 34 Report
- wDescriptorLength 159
- Report Descriptors:
- ** UNAVAILABLE **
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x82 EP 2 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0004 1x 4 bytes
- bInterval 255
- Device Status: 0x0000
- (Bus Powered)
- Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0001 1.1 root hub
- bcdDevice 4.09
- iManufacturer 3 Linux 4.9.8 ohci_hcd
- iProduct 2 OHCI PCI host controller
- iSerial 1 0000:00:13.1
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0002 1x 2 bytes
- bInterval 255
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 3
- wHubCharacteristic 0x0012
- No power switching (usb 1.0)
- No overcurrent protection
- bPwrOn2PwrGood 2 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0303 lowspeed power enable connect
- Port 2: 0000.0100 power
- Port 3: 0000.0100 power
- Device Status: 0x0003
- Self Powered
- Remote Wakeup Enabled
- Bus 005 Device 002: ID 0c45:5101 Microdia
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 0
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 32
- idVendor 0x0c45 Microdia
- idProduct 0x5101
- bcdDevice 1.20
- iManufacturer 1 MemsArt MA144
- iProduct 2 RF Controller
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 84
- bNumInterfaces 3
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xa0
- (Bus Powered)
- Remote Wakeup
- MaxPower 200mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 3 Human Interface Device
- bInterfaceSubClass 1 Boot Interface Subclass
- bInterfaceProtocol 1 Keyboard
- iInterface 0
- HID Device Descriptor:
- bLength 9
- bDescriptorType 33
- bcdHID 1.10
- bCountryCode 0 Not supported
- bNumDescriptors 1
- bDescriptorType 34 Report
- wDescriptorLength 63
- Report Descriptors:
- ** UNAVAILABLE **
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0040 1x 64 bytes
- bInterval 8
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 1
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 3 Human Interface Device
- bInterfaceSubClass 1 Boot Interface Subclass
- bInterfaceProtocol 2 Mouse
- iInterface 0
- HID Device Descriptor:
- bLength 9
- bDescriptorType 33
- bcdHID 1.10
- bCountryCode 0 Not supported
- bNumDescriptors 1
- bDescriptorType 34 Report
- wDescriptorLength 52
- Report Descriptors:
- ** UNAVAILABLE **
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x82 EP 2 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0040 1x 64 bytes
- bInterval 8
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 2
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 3 Human Interface Device
- bInterfaceSubClass 1 Boot Interface Subclass
- bInterfaceProtocol 1 Keyboard
- iInterface 0
- HID Device Descriptor:
- bLength 9
- bDescriptorType 33
- bcdHID 1.10
- bCountryCode 0 Not supported
- bNumDescriptors 1
- bDescriptorType 34 Report
- wDescriptorLength 68
- Report Descriptors:
- ** UNAVAILABLE **
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x83 EP 3 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0040 1x 64 bytes
- bInterval 8
- Device Status: 0x0000
- (Bus Powered)
- Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0001 1.1 root hub
- bcdDevice 4.09
- iManufacturer 3 Linux 4.9.8 ohci_hcd
- iProduct 2 OHCI PCI host controller
- iSerial 1 0000:00:13.0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0002 1x 2 bytes
- bInterval 255
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 3
- wHubCharacteristic 0x0012
- No power switching (usb 1.0)
- No overcurrent protection
- bPwrOn2PwrGood 2 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Port 2: 0000.0100 power
- Port 3: 0000.0103 power enable connect
- Device Status: 0x0003
- Self Powered
- Remote Wakeup Enabled
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0002 2.0 root hub
- bcdDevice 4.09
- iManufacturer 3 Linux 4.9.8 ehci_hcd
- iProduct 2 EHCI Host Controller
- iSerial 1 0000:00:12.2
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0004 1x 4 bytes
- bInterval 12
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 6
- wHubCharacteristic 0x000a
- No power switching (usb 1.0)
- Per-port overcurrent protection
- bPwrOn2PwrGood 10 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x02
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Port 2: 0000.0100 power
- Port 3: 0000.0100 power
- Port 4: 0000.0100 power
- Port 5: 0000.0100 power
- Port 6: 0000.0100 power
- Device Status: 0x0001
- Self Powered
- Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0001 1.1 root hub
- bcdDevice 4.09
- iManufacturer 3 Linux 4.9.8 ohci_hcd
- iProduct 2 OHCI PCI host controller
- iSerial 1 0000:00:12.1
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0002 1x 2 bytes
- bInterval 255
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 3
- wHubCharacteristic 0x0012
- No power switching (usb 1.0)
- No overcurrent protection
- bPwrOn2PwrGood 2 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Port 2: 0000.0100 power
- Port 3: 0000.0100 power
- Device Status: 0x0001
- Self Powered
- Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 9 Hub
- bDeviceSubClass 0
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0001 1.1 root hub
- bcdDevice 4.09
- iManufacturer 3 Linux 4.9.8 ohci_hcd
- iProduct 2 OHCI PCI host controller
- iSerial 1 0000:00:12.0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0002 1x 2 bytes
- bInterval 255
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 3
- wHubCharacteristic 0x0012
- No power switching (usb 1.0)
- No overcurrent protection
- bPwrOn2PwrGood 2 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Port 2: 0000.0100 power
- Port 3: 0000.0100 power
- Device Status: 0x0001
- Self Powered
- ################################################################################
- # ... output of lsusb -t
- # LibreELEC release: Generic.x86_64-8.0.0
- #
- ################################################################################
- /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
- |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
- |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
- /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
- |__ Port 3: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
- |__ Port 3: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
- |__ Port 3: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M
- /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
- /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
- /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
- /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
- ################################################################################
- # ... output of cat /proc/cpuinfo
- # LibreELEC release: Generic.x86_64-8.0.0
- #
- ################################################################################
- processor : 0
- vendor_id : AuthenticAMD
- cpu family : 16
- model : 2
- model name : AMD Athlon(tm) 7550 Dual-Core Processor
- stepping : 3
- microcode : 0x1000095
- cpu MHz : 1250.000
- cache size : 512 KB
- physical id : 0
- siblings : 2
- core id : 0
- cpu cores : 2
- apicid : 0
- initial apicid : 0
- fpu : yes
- fpu_exception : yes
- cpuid level : 5
- wp : yes
- flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid eagerfpu pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs hw_pstate vmmcall npt lbrv svm_lock
- bugs : tlb_mmatch fxsave_leak sysret_ss_attrs null_seg amd_e400
- bogomips : 5002.65
- TLB size : 1024 4K pages
- clflush size : 64
- cache_alignment : 64
- address sizes : 48 bits physical, 48 bits virtual
- power management: ts ttp tm stc 100mhzsteps hwpstate
- processor : 1
- vendor_id : AuthenticAMD
- cpu family : 16
- model : 2
- model name : AMD Athlon(tm) 7550 Dual-Core Processor
- stepping : 3
- microcode : 0x1000095
- cpu MHz : 1250.000
- cache size : 512 KB
- physical id : 0
- siblings : 2
- core id : 1
- cpu cores : 2
- apicid : 1
- initial apicid : 1
- fpu : yes
- fpu_exception : yes
- cpuid level : 5
- wp : yes
- flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid eagerfpu pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs hw_pstate vmmcall npt lbrv svm_lock
- bugs : tlb_mmatch fxsave_leak sysret_ss_attrs null_seg amd_e400
- bogomips : 4989.26
- TLB size : 1024 4K pages
- clflush size : 64
- cache_alignment : 64
- address sizes : 48 bits physical, 48 bits virtual
- power management: ts ttp tm stc 100mhzsteps hwpstate
- ################################################################################
- # ... output of get_governor_details
- # LibreELEC release: Generic.x86_64-8.0.0
- #
- ################################################################################
- /sys/devices/system/cpu
- cpu0 : <dir>
- cpu1 : <dir>
- cpufreq : <dir>
- cpuidle : <dir>
- hotplug : <dir>
- kernel_max : 15
- microcode : <dir>
- modalias : cpu:type:x86,ven0002fam0010mod0002:feature:,0000,0001,0002,0003,0004,0005,0006,0007,0008,0009,000B,000C,000D,000E,000F,0010,0011,0013,0017,0018,0019,001A,001C,0020,0021,0022,0023,0024,0025,0026,0027,0028,0029,002B,002C,002D,002E,002F,0030,0031,0034,0036,0037,0038,0039,003A,003B,003D,003E,003F,0064,0068,006E,0070,0071,0074,0075,0078,007A,007D,0080,0083,008D,0097,00C0,00C1,00C2,00C3,00C4,00C5,00C6,00C7,00C8,00C9,00CA,00E8,010F,01E0,01E1,01E2
- offline : 2-3
- online : 0-1
- possible : 0-3
- power : <dir>
- present : 0-1
- /sys/devices/system/cpu/cpufreq
- ondemand : <dir>
- policy0 : <dir>
- policy1 : <dir>
- /sys/devices/system/cpu/cpu0/cpufreq
- affected_cpus : 0
- bios_limit : 2500000
- cpb : 0
- cpuinfo_cur_freq : 2500000
- cpuinfo_max_freq : 2500000
- cpuinfo_min_freq : 1250000
- cpuinfo_transition_latency : 18000
- freqdomain_cpus : 0
- related_cpus : 0
- scaling_available_frequencies : 2500000 1250000
- scaling_available_governors : powersave ondemand performance
- scaling_cur_freq : 2500000
- scaling_driver : acpi-cpufreq
- scaling_governor : ondemand
- scaling_max_freq : 2500000
- scaling_min_freq : 1250000
- scaling_setspeed : <unsupported>
- stats : <dir>
- /sys/devices/system/cpu/cpu1/cpufreq
- affected_cpus : 1
- bios_limit : 2500000
- cpb : 0
- cpuinfo_cur_freq : 2500000
- cpuinfo_max_freq : 2500000
- cpuinfo_min_freq : 1250000
- cpuinfo_transition_latency : 18000
- freqdomain_cpus : 1
- related_cpus : 1
- scaling_available_frequencies : 2500000 1250000
- scaling_available_governors : powersave ondemand performance
- scaling_cur_freq : 2500000
- scaling_driver : acpi-cpufreq
- scaling_governor : ondemand
- scaling_max_freq : 2500000
- scaling_min_freq : 1250000
- scaling_setspeed : <unsupported>
- stats : <dir>
- ################################################################################
- # ... output of cat /proc/meminfo
- # LibreELEC release: Generic.x86_64-8.0.0
- #
- ################################################################################
- MemTotal: 3062232 kB
- MemFree: 1559616 kB
- MemAvailable: 2191252 kB
- Buffers: 74608 kB
- Cached: 811056 kB
- SwapCached: 0 kB
- Active: 722744 kB
- Inactive: 622020 kB
- Active(anon): 518136 kB
- Inactive(anon): 153492 kB
- Active(file): 204608 kB
- Inactive(file): 468528 kB
- Unevictable: 0 kB
- Mlocked: 0 kB
- SwapTotal: 0 kB
- SwapFree: 0 kB
- Dirty: 0 kB
- Writeback: 0 kB
- AnonPages: 459108 kB
- Mapped: 88352 kB
- Shmem: 212536 kB
- Slab: 44824 kB
- SReclaimable: 30820 kB
- SUnreclaim: 14004 kB
- KernelStack: 3504 kB
- PageTables: 3388 kB
- NFS_Unstable: 0 kB
- Bounce: 0 kB
- WritebackTmp: 0 kB
- CommitLimit: 1531116 kB
- Committed_AS: 1293300 kB
- VmallocTotal: 34359738367 kB
- VmallocUsed: 0 kB
- VmallocChunk: 0 kB
- AnonHugePages: 0 kB
- ShmemHugePages: 0 kB
- ShmemPmdMapped: 0 kB
- DirectMap4k: 120320 kB
- DirectMap2M: 3024896 kB
- DirectMap1G: 0 kB
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement