Guest User

Untitled

a guest
May 24th, 2020
25
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. CASset=max
  2. CONTRY_TYPE=FF
  3. FEATURE_BIT=00
  4. MALLOC_len=5
  5. MODEL_ID=B303
  6. MPmode=SMP
  7. PRODUCT_NAME=STG-328
  8. VENDOR_NAME=MitraStar Technology Corp.
  9. autoload=no
  10. baudrate=115200
  11. boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr
  12. bootargs=console=ttyS0,115200 ubi.mtd=4,2048 rootfstype=ubifs root=ubi0:rootfs1 rw rootdelay=2
  13. bootargs_dflt=$console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel
  14. bootargs_end=:10.4.50.254:255.255.255.0:Armada38x:eth0:none
  15. bootargs_root=root=/dev/nfs rw
  16. bootcmd=nand read 0x2000000 0x00E00000 0xF00000 && bootz 0x2000000
  17. bootcmd_auto=stage_boot $boot_order
  18. bootcmd_custom_sata=if run sata_bootcmd; then; else if run bootcmd_stock_1; then; else run bootcmd_stock_2; reset; fi; fi
  19. bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
  20. bootcmd_fdt_boot=tftpboot 0x2000000 $image_name; setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
  21. bootcmd_fdt_edit=tftpboot $fdtaddr $fdtfile; fdt addr $fdtaddr; setenv bootcmd $bootcmd_fdt_boot
  22. bootcmd_lgcy=tftpboot 0x2000000 $image_name; setenv bootargs $bootargs_dflt; bootm 0x2000000;
  23. bootdelay=3
  24. cacheShare=no
  25. console=console=ttyS0,115200
  26. core_checksum_1=c782fd9d1adda4a6bac11cb570151a09
  27. core_checksum_2=2f15113ab9fcc197123bcdbe440d7a5c
  28. device_partition=0:1
  29. disaMvPnp=no
  30. eeeEnable=no
  31. enaClockGating=no
  32. enaCpuStream=no
  33. enaFPU=yes
  34. enaMonExt=no
  35. enaWrAllo=no
  36. eth1addr=00:50:43:38:32:25
  37. eth1mtu=1500
  38. eth2addr=00:50:43:38:a6:25
  39. eth2mtu=1500
  40. eth3addr=00:50:43:32:a6:38
  41. eth3mtu=1500
  42. ethact=egiga0
  43. ethaddr=5C:6A:80:15:DF:5B
  44. ethmtu=1500
  45. ethprime=egiga0
  46. fdt_addr=2040000
  47. fdt_skip_update=yes
  48. fdtaddr=0x1000000
  49. fdtfile=armada-38x-modular.dtb
  50. fwversion_1=V5.21(AAZF.8)
  51. fwversion_2=V5.21(AAZF.5)
  52. ide_path=/
  53. image_name=uImage
  54. img_checksum_1=dd8adfdfaec6f9560ac52c54b277f5cf
  55. img_checksum_2=02f236d559abf64ae3dcd35d76269370
  56. initrd_name=uInitrd
  57. ipaddr=10.4.50.170
  58. kernel_addr=${kernel_addr_1}
  59. kernel_addr_2=0x08700000
  60. kernel_addr_r=2080000
  61. kernel_mtd_1=3
  62. kernel_mtd_2=5
  63. lcd0_enable=0
  64. lcd0_params=640x480-16@60
  65. lcd_panel=0
  66. loadaddr=0x02000000
  67. loads_echo=0
  68. modelid_1=B303
  69. modelid_2=B303
  70. mtdids=nand0=armada-nand
  71. mtdparts=mtdparts=armada-nand:2m(u-boot),2m(env),2m(config),15m(kernel1),110m(rootfs1),15m(kernel2),-(rootfs2)
  72. mvNetConfig=mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500
  73. mv_pon_addr=00:50:43:25:a6:38
  74. nandEcc=nfcConfig=4bitecc
  75. netbsd_en=no
  76. netmask=255.255.255.0
  77. netretry=no
  78. pcieTune=no
  79. pexMode=RC
  80. pxe_files_load=:default.arm-armadaxp-db:default.arm-armadaxp:default.arm
  81. pxefile_addr_r=3100000
  82. ramdisk_addr_r=2880000
  83. revision_1=51181
  84. revision_2=51166
  85. romfile_checksum_1=B316
  86. romfile_checksum_2=B86D
  87. rootpath=/srv/nfs/
  88. sata_bootcmd=echo Booting from SATA ...; setenv fdt_skip_update yes; run sata_init; ext2load scsi 0:1 $load_image_addr /boot/zImage; ext2load scsi 0:1 $load_dtb_addr /boot/dts/armada-380-zyxel-nas326.dtb; ext2load scsi 0:1 $load_initrd_addr /boot/uInitrd; run sata_set_bootargs; bootz $load_image_addr $load_initrd_addr $load_dtb_addr
  89. sata_delay_reset=0
  90. sata_dma_mode=yes
  91. sata_init=mw.l f1018100 20420000; mw.l f1018140 003ca800; sleep 3; scsi init
  92. sata_set_bootargs=setenv bootargs "console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts earlyprintk=serial"
  93. script_addr_r=3000000
  94. script_name=boot.scr
  95. scsidevs=0
  96. serial_number=S170Y17031328
  97. serverip=10.4.50.38
  98. standalone=fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000;
  99. stderr=serial
  100. stdin=serial
  101. stdout=serial
  102. sysimg_mtd_1=4
  103. sysimg_mtd_2=6
  104. usb0Mode=host
  105. usbActive=0
  106. usbType=2
  107. vxworks_en=no
  108. yuk_ethaddr=00:00:00:EE:51:81
  109. zld_checksum_1=e3da2fd44e82e74d7c15dbeef23be3d0
  110. zld_checksum_2=e17c70cd6cf445429aa851d08f1f4269
  111. curr_bootfrom=1
  112. next_bootfrom=1
  113. load_dtb_addr=0x1000000
  114. load_initrd_addr=0x2900000
  115. load_image_addr=0x02000000
  116. usb_init=mw.l f1018100 20420000; mw.l f1018140 003E8800; sleep 3; usb start
  117. set_bootargs_stock=setenv bootargs "console=ttyS0,115200 ubi.mtd=4,2048 rootfstype=ubifs root=ubi0:rootfs1 rw rootdelay=2"
  118. bootcmd_stock_1=run set_bootargs_stock; echo Booting from NAND kernel 1 ...; nand read 0x2000000 0x00E00000 0xF00000 && bootz 0x2000000
  119. bootcmd_stock_2=run set_bootargs_stock; echo Booting from NAND kernel 2 ...; nand read 0x2000000 0x08700000 0xF00000 && bootz 0x2000000
  120. usb_set_bootargs=setenv bootargs "console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts earlyprintk=serial"
  121. usb_bootcmd=echo Booting from USB ...; setenv fdt_skip_update yes; run usb_init; ext2load usb 0:1 $load_image_addr /boot/zImage; ext2load usb 0:1 $load_dtb_addr /boot/dts/armada-380-zyxel-nas326.dtb; ext2load usb 0:1 $load_initrd_addr /boot/uInitrd; run usb_set_bootargs; bootz $load_image_addr $load_initrd_addr $load_dtb_addr
  122. bootcmd_custom=if run usb_bootcmd; then; else if run bootcmd_stock_1; then; else run bootcmd_stock_2; reset; fi; fi
  123. kernel_addr_1=0x00000000; run bootcmd_custom;
  124. change_boot_part=1
RAW Paste Data