[00:00:00.371,276] <dbg> zmk: behavior_macro_init: Precalculate initial release state:
[00:00:00.371,276] <dbg> zmk: behavior_macro_init: Precalculate initial release state:
[00:00:00.371,307] <dbg> zmk: behavior_macro_init: Precalculate initial release state:
[00:00:00.371,337] <dbg> zmk: behavior_macro_init: Precalculate initial release state:
[00:00:00.421,661] <dbg> zmk: vddh_init: VDDHDIV5 setup returned 0
*** Booting Zephyr OS build e02cbce8cb96 ***
[00:00:00.428,314] <inf> fs_nvs: 8 Sectors of 4096 bytes
[00:00:00.428,344] <inf> fs_nvs: alloc wra: 0, fa0
[00:00:00.428,344] <inf> fs_nvs: data wra: 0, 54
[00:00:00.429,870] <inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)
[00:00:00.429,901] <inf> bt_hci_core: HW Variant: nRF52x (0x0002)
[00:00:00.429,931] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 3.5 Build 0
[00:00:00.430,267] <inf> bt_hci_core: No ID address. App must call settings_load()
[00:00:00.430,419] <dbg> zmk: kscan_matrix_init_input_inst: Configured pin 0 on gpio@50000300 for input
[00:00:00.430,480] <dbg> zmk: kscan_matrix_init_input_inst: Configured pin 4 on gpio@50000300 for input
[00:00:00.430,511] <dbg> zmk: kscan_matrix_init_input_inst: Configured pin 2 on gpio@50000000 for input
[00:00:00.430,572] <dbg> zmk: kscan_matrix_init_input_inst: Configured pin 29 on gpio@50000000 for input
[00:00:00.430,633] <dbg> zmk: kscan_matrix_init_input_inst: Configured pin 9 on gpio@50000000 for input
[00:00:00.430,664] <dbg> zmk: kscan_matrix_init_input_inst: Configured pin 11 on gpio@50000000 for input
[00:00:00.430,725] <dbg> zmk: kscan_matrix_init_output_inst: Configured pin 15 on gpio@50000300 for output
[00:00:00.430,755] <dbg> zmk: kscan_matrix_init_output_inst: Configured pin 24 on gpio@50000000 for output
[00:00:00.430,816] <dbg> zmk: kscan_matrix_init_output_inst: Configured pin 22 on gpio@50000000 for output
[00:00:00.430,877] <dbg> zmk: kscan_matrix_init_output_inst: Configured pin 6 on gpio@50000300 for output
[00:00:00.431,152] <dbg> zmk: zmk_usb_get_conn_state: state: 11
[00:00:00.431,152] <dbg> zmk: get_selected_transport: No endpoint transports are ready.
[00:00:00.431,427] <inf> zmk: Welcome to ZMK!

[00:00:00.432,098] <inf> bt_hci_core: Identity: D9:C3:07:C9:7C:FB (random)
[00:00:00.432,128] <inf> bt_hci_core: HCI: version 5.4 (0x0d) revision 0x0000, manufacturer 0x05f1
[00:00:00.432,159] <inf> bt_hci_core: LMP: version 5.4 (0x0d) subver 0xffff
[00:00:00.432,312] <inf> usb_hid: Device connected
[00:00:00.432,312] <dbg> zmk: zmk_usb_get_conn_state: state: 2
[00:00:00.432,342] <dbg> zmk: zmk_usb_get_conn_state: state: 2
[00:00:00.432,373] <dbg> zmk: zmk_usb_get_conn_state: state: 2
[00:00:00.432,403] <dbg> zmk: get_selected_transport: No endpoint transports are ready.
[00:00:00.435,394] <inf> usb_hid: Device suspended
[00:00:00.435,424] <dbg> zmk: zmk_usb_get_conn_state: state: 5
[00:00:00.435,455] <dbg> zmk: zmk_usb_get_conn_state: state: 5
[00:00:00.435,485] <dbg> zmk: zmk_usb_get_conn_state: state: 5
[00:00:00.435,485] <dbg> zmk: get_selected_transport: No endpoint transports are ready.
[00:00:00.435,638] <dbg> zmk: zmk_ble_ready: ready? 0
[00:00:00.435,638] <dbg> zmk: update_advertising: advertising from 0 to 2
[00:00:00.440,948] <dbg> zmk: vddh_sample_fetch: ADC raw 3368 ~ 4930 mV => 100%
[00:00:00.440,979] <dbg> zmk: zmk_battery_update: Setting BAS GATT battery level to 100.
[00:00:00.534,851] <inf> usb_hid: Device resumed
[00:00:00.534,851] <inf> usb_hid: from suspend
[00:00:00.534,881] <dbg> zmk: zmk_usb_get_conn_state: state: 6
[00:00:00.534,942] <inf> usb_hid: Device reset detected
[00:00:00.534,942] <dbg> zmk: zmk_usb_get_conn_state: state: 1
[00:00:00.534,973] <dbg> zmk: zmk_usb_get_conn_state: state: 1
[00:00:00.535,003] <dbg> zmk: zmk_usb_get_conn_state: state: 1
[00:00:00.535,034] <dbg> zmk: get_selected_transport: No endpoint transports are ready.
[00:00:00.631,072] <inf> usb_hid: Device configured
[00:00:00.631,072] <dbg> zmk: zmk_usb_get_conn_state: state: 3
[00:00:00.631,134] <dbg> zmk: zmk_usb_get_conn_state: state: 3
[00:00:00.631,164] <dbg> zmk: zmk_usb_get_conn_state: state: 3
[00:00:00.631,164] <dbg> zmk: get_selected_transport: Only USB is ready.
[00:00:00.631,195] <dbg> zmk: zmk_endpoints_send_report: usage page 0x07
[00:00:00.631,225] <dbg> zmk: zmk_endpoints_send_report: usage page 0x0C
[00:00:00.631,256] <inf> zmk: Endpoint changed: USB
[00:00:00.631,317] <wrn> zmk: Not sending, no active address for current profile
[00:00:00.631,347] <wrn> zmk: Not sending, no active address for current profile