Guest User

demsg de mi ar-5387un

a guest
Sep 18th, 2014
279
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. root@OpenWrt:/dev# dmesg
  2. [    0.000000] Linux version 3.10.49 (noltari@skynet) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42068) ) #1 Wed Aug 13 14:45:32 CEST 2014
  3. [    0.000000] Detected Broadcom 0x6328 CPU revision b0
  4. [    0.000000] CPU frequency is 320 MHz
  5. [    0.000000] 64MB of RAM installed
  6. [    0.000000] registering 32 GPIOs
  7. [    0.000000] board_bcm963xx: Boot address 0xb8000000
  8. [    0.000000] board_bcm963xx: CFE version: 1.0.37-110.11-2
  9. [    0.000000] bootconsole [early0] enabled
  10. [    0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
  11. [    0.000000] board: board name: 96328A-1441N1
  12. [    0.000000] Determined physical RAM map:
  13. [    0.000000]  memory: 04000000 @ 00000000 (usable)
  14. [    0.000000] Initrd not found or empty - disabling initrd
  15. [    0.000000] Zone ranges:
  16. [    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
  17. [    0.000000] Movable zone start for each node
  18. [    0.000000] Early memory node ranges
  19. [    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
  20. [    0.000000] On node 0 totalpages: 16384
  21. [    0.000000] free_area_init_node: node 0, pgdat 802e6ab0, node_mem_map 81000000
  22. [    0.000000]   Normal zone: 128 pages used for memmap
  23. [    0.000000]   Normal zone: 0 pages reserved
  24. [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
  25. [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
  26. [    0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  27. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  28. [    0.000000] pcpu-alloc: [0] 0
  29. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
  30. [    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  31. [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  32. [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  33. [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  34. [    0.000000] Memory: 61336k/65536k available (2375k kernel code, 4200k reserved, 631k data, 320k init, 0k highmem)
  35. [    0.000000] NR_IRQS:256
  36. [    0.036000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)
  37. [    0.036000] pid_max: default: 32768 minimum: 301
  38. [    0.040000] Mount-cache hash table entries: 512
  39. [    0.048000] NET: Registered protocol family 16
  40. [    0.288000] registering PCI controller with io_map_base unset
  41. [    0.300000] bio: create slab <bio-0> at 0
  42. [    0.308000] PCI host bridge to bus 0000:00
  43. [    0.312000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff]
  44. [    0.316000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  45. [    0.320000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  46. [    0.324000] pci 0000:00:00.0: [14e4:6328] type 01 class 0x060400
  47. [    0.324000] pci 0000:00:00.0: PME# supported from D0 D3hot
  48. [    0.324000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  49. [    0.328000] pci 0000:01:00.0: [14e4:a8d8] type 00 class 0x028000
  50. [    0.328000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
  51. [    0.328000] pci 0000:01:00.0: supports D1 D2
  52. [    0.328000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  53. [    0.328000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
  54. [    0.328000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
  55. [    0.332000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit]
  56. [    0.336000] pci 0000:00:00.0: PCI bridge to [bus 01]
  57. [    0.340000] pci 0000:00:00.0:   bridge window [mem 0x10f00000-0x10ffffff]
  58. [    0.344000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  59. [    0.348000] Switching to clocksource MIPS
  60. [    0.356000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
  61. [    0.364000] bcma: bus0: Found chip with id 0xA8D9, rev 0x01 and package 0x0A
  62. [    0.372000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
  63. [    0.380000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
  64. [    0.388000] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
  65. [    0.480000] bcma: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
  66. [    0.496000] bcma: bus0: Bus registered
  67. [    0.504000] NET: Registered protocol family 2
  68. [    0.508000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  69. [    0.516000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  70. [    0.520000] TCP: Hash tables configured (established 512 bind 512)
  71. [    0.528000] TCP: reno registered
  72. [    0.532000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  73. [    0.540000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  74. [    0.544000] NET: Registered protocol family 1
  75. [    0.548000] PCI: CLS 0 bytes, default 16
  76. [    0.552000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  77. [    0.560000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  78. [    0.572000] msgmni has been set to 119
  79. [    0.576000] io scheduler noop registered
  80. [    0.580000] io scheduler deadline registered (default)
  81. [    0.588000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm63xx_uart
  82. [    0.596000] console [ttyS0] enabled, bootconsole disabled
  83. [    0.612000] m25p80 spi1.0: found mx25l12805d, expected m25p80
  84. [    0.620000] m25p80 spi1.0: mx25l12805d (16384 Kbytes)
  85. [    0.624000] bcm63xxpart: CFE boot tag found with version 6 and board type 96328A-1441N1
  86. [    0.632000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
  87. [    0.640000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 10ff00
  88. [    0.648000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length ed0000
  89. [    0.656000] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
  90. [    0.660000] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
  91. [    0.668000] bcm63xxpart: Spare partition is offset 5e0004 and length a0fffc
  92. [    0.676000] 5 bcm63xxpart partitions found on MTD device spi1.0
  93. [    0.684000] Creating 5 MTD partitions on "spi1.0":
  94. [    0.688000] 0x000000000000-0x000000010000 : "CFE"
  95. [    0.696000] 0x000000010100-0x000000120000 : "kernel"
  96. [    0.700000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  97. [    0.716000] 0x000000120000-0x000000ff0000 : "rootfs"
  98. [    0.724000] mtd: device 2 (rootfs) set to be root filesystem
  99. [    0.728000] mtd: partition "rootfs_data" created automatically, ofs=0x5e0000, len=0xa10000
  100. [    0.740000] 0x0000005e0000-0x000000ff0000 : "rootfs_data"
  101. [    0.748000] 0x000000ff0000-0x000001000000 : "nvram"
  102. [    0.756000] 0x000000010000-0x000000ff0000 : "linux"
  103. [    0.804000] b53_common: found switch: BCM63xx, rev 0
  104. [    0.808000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
  105. [    0.820000] TCP: cubic registered
  106. [    0.824000] NET: Registered protocol family 17
  107. [    0.828000] 8021q: 802.1Q VLAN Support v1.8
  108. [    0.844000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  109. [    0.856000] Freeing unused kernel memory: 320K (80300000 - 80350000)
  110. [    7.184000] usbcore: registered new interface driver usbfs
  111. [    7.192000] usbcore: registered new interface driver hub
  112. [    7.200000] usbcore: registered new device driver usb
  113. [    7.212000] Button Hotplug driver version 0.4.1
  114. [    7.308000] SCSI subsystem initialized
  115. [    7.328000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  116. [    7.336000] ehci-platform: EHCI generic platform driver
  117. [    7.448000] ehci-platform ehci-platform: EHCI Host Controller
  118. [    7.452000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  119. [    7.460000] ehci-platform ehci-platform: irq 50, io mem 0xb0002500
  120. [    7.480000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
  121. [    7.488000] hub 1-0:1.0: USB hub found
  122. [    7.492000] hub 1-0:1.0: 1 port detected
  123. [    7.504000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  124. [    7.508000] ohci-platform ohci-platform: Generic Platform OHCI Controller
  125. [    7.516000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
  126. [    7.524000] ohci-platform ohci-platform: irq 49, io mem 0xb0002600
  127. [    7.592000] hub 2-0:1.0: USB hub found
  128. [    7.596000] hub 2-0:1.0: 1 port detected
  129. [    7.612000] usbcore: registered new interface driver usb-storage
  130. [    7.624000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
  131. [    7.812000] usb 1-1: new high-speed USB device number 2 using ehci-platform
  132. [    8.096000] hub 1-1:1.0: USB hub found
  133. [    8.100000] hub 1-1:1.0: 4 ports detected
  134. [    8.836000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
  135. [    8.904000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 2, 100Mbps, full-duplex
  136. [    8.960000] usb-storage 1-1.1:1.6: USB Mass Storage device detected
  137. [    8.984000] scsi0 : usb-storage 1-1.1:1.6
  138. [    9.064000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
  139. [    9.176000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
  140. [    9.184000] scsi1 : usb-storage 1-1.4:1.0
  141. [    9.992000] scsi 0:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
  142. [   10.008000] sd 0:0:0:0: [sda] Attached SCSI removable disk
  143. [   10.192000] scsi 1:0:0:0: Direct-Access              USB DISK Pro     PMAP PQ: 0 ANSI: 4
  144. [   10.212000] sd 1:0:0:0: [sdb] 15638528 512-byte logical blocks: (8.00 GB/7.45 GiB)
  145. [   10.220000] sd 1:0:0:0: [sdb] Write Protect is off
  146. [   10.224000] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
  147. [   10.228000] sd 1:0:0:0: [sdb] No Caching mode page found
  148. [   10.232000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
  149. [   10.244000] sd 1:0:0:0: [sdb] No Caching mode page found
  150. [   10.252000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
  151. [   10.260000]  sdb: sdb1 sdb2
  152. [   10.272000] sd 1:0:0:0: [sdb] No Caching mode page found
  153. [   10.276000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
  154. [   10.284000] sd 1:0:0:0: [sdb] Attached SCSI removable disk
  155. [   12.560000] jffs2: notice: (282) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 16 of xref (0 dead, 2 orphan) found.
  156. [   17.748000] Adding 262140k swap on /dev/sdb1.  Priority:-1 extents:1 across:262140k
  157. [   17.956000] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:
  158. [   19.760000] NET: Registered protocol family 10
  159. [   19.804000] NTFS driver 2.1.30 [Flags: R/O MODULE].
  160. [   19.840000] nf_conntrack version 0.5.0 (963 buckets, 3852 max)
  161. [   19.860000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  162. [   19.892000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
  163. [   19.900000] Backport generated by backports.git backports-20140320-37-g5c33da0
  164. [   19.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
  165. [   19.940000] lib80211: common routines for IEEE802.11 drivers
  166. [   19.948000] lib80211_crypt: registered algorithm 'NULL'
  167. [   19.948000] lib80211_crypt: registered algorithm 'CCMP'
  168. [   19.952000] lib80211_crypt: registered algorithm 'TKIP'
  169. [   19.956000] lib80211_crypt: registered algorithm 'WEP'
  170. [   20.032000] xt_time: kernel timezone is -0000
  171. [   20.044000] usbcore: registered new interface driver zd1201
  172. [   20.144000] cfg80211: Calling CRDA to update world regulatory domain
  173. [   20.156000] cfg80211: World regulatory domain updated:
  174. [   20.160000] cfg80211:  DFS Master region: unset
  175. [   20.164000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  176. [   20.176000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  177. [   20.184000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  178. [   20.192000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  179. [   20.200000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
  180. [   20.208000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  181. [   20.216000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  182. [   20.224000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  183. [   20.232000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  184. [   20.344000] usbcore: registered new interface driver p54usb
  185. [   20.360000] PPP generic driver version 2.4.2
  186. [   20.372000] NET: Registered protocol family 24
  187. [   20.408000] usbcore: registered new interface driver rt73usb
  188. [   20.428000] usbcore: registered new interface driver rtl8187
  189. [   20.456000] usbcore: registered new interface driver usb8xxx
  190. [   20.476000] usbcore: registered new interface driver zd1211rw
  191. [   20.576000] usbcore: registered new interface driver brcmfmac
  192. [   20.668000] usbcore: registered new interface driver carl9170
  193. [   20.676000] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 31
  194. [   20.692000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  195. [   20.720000] usbcore: registered new interface driver rt2500usb
  196. [   20.776000] usbcore: registered new interface driver rt2800usb
  197. [   20.832000] usbcore: registered new interface driver ath9k_htc
  198. [   20.896000] usbcore: registered new interface driver rtl8192cu
  199. [   25.300000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 2, 100Mbps, full-duplex
  200. [   32.420000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 2, 100Mbps, full-duplex
  201. [   32.444000] device eth0.1 entered promiscuous mode
  202. [   32.448000] device eth0 entered promiscuous mode
  203. [   32.456000] br-lan: port 1(eth0.1) entered forwarding state
  204. [   32.460000] br-lan: port 1(eth0.1) entered forwarding state
  205. [   34.464000] br-lan: port 1(eth0.1) entered forwarding state
  206. [   35.560000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
  207. [   35.568000] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
  208. [   35.588000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  209. [   40.316000] wlan0: authenticate with 64:68:xx:xx:xx:xx
  210. [   40.324000] wlan0: send auth to 64:68:xx:xx:xx:xx (try 1/3)
  211. [   40.332000] wlan0: authenticated
  212. [   40.340000] brcmsmac bcma0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
  213. [   40.344000] brcmsmac bcma0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
  214. [   40.356000] brcmsmac bcma0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
  215. [   40.368000] wlan0: associate with 64:68:xx:xx:xx:xx (try 1/3)
  216. [   40.376000] wlan0: RX AssocResp from 64:68:xx:xx:xx:xx (capab=0x411 status=0 aid=2)
  217. [   40.384000] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
  218. [   40.392000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
  219. [   40.400000] wlan0: associated
  220. [   40.400000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  221. [  785.444000] usb 1-1.1: USB disconnect, device number 3
  222. [  792.044000] usb 1-1.1: new high-speed USB device number 5 using ehci-platform
  223. [  792.156000] usb-storage 1-1.1:1.0: USB Mass Storage device detected
  224. [  792.164000] scsi2 : usb-storage 1-1.1:1.0
  225. [  794.148000] usb 1-1.1: USB disconnect, device number 5
  226. [  798.956000] usb 1-1.1: new high-speed USB device number 6 using ehci-platform
  227. [  799.084000] usb-storage 1-1.1:1.6: USB Mass Storage device detected
  228. [  799.100000] scsi3 : usb-storage 1-1.1:1.6
  229. [  800.108000] scsi 3:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
  230. [  800.152000] sd 3:0:0:0: [sda] Attached SCSI removable disk
  231. [ 3780.476000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
  232. [78863.476000] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
  233. [78863.484000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
  234. [78897.672000] wlan0: authenticate with 64:68:xx:xx:xx:xx
  235. [78897.680000] wlan0: direct probe to 64:68:xx:xx:xx:xx (try 1/3)
  236. [78897.888000] wlan0: direct probe to 64:68:xx:xx:xx:xx (try 2/3)
  237. [78898.096000] wlan0: direct probe to 64:68:xx:xx:xx:xx (try 3/3)
  238. [78898.304000] wlan0: authentication with 64:68:xx:xx:xx:xx timed out
  239. [78903.336000] wlan0: authenticate with 64:68:xx:xx:xx:xx
  240. [78903.344000] wlan0: direct probe to 64:68:xx:xx:xx:xx (try 1/3)
  241. [78903.552000] wlan0: direct probe to 64:68:xx:xx:xx:xx (try 2/3)
  242. [78903.760000] wlan0: direct probe to 64:68:xx:xx:xx:xx (try 3/3)
  243. [78903.968000] wlan0: authentication with 64:68:xx:xx:xx:xx timed out
  244. [78905.816000] wlan0: authenticate with 64:68:xx:xx:xx:xx
  245. [78905.824000] wlan0: send auth to 64:68:xx:xx:xx:xx (try 1/3)
  246. [78905.892000] wlan0: send auth to 64:68:xx:xx:xx:xx (try 2/3)
  247. [78906.036000] wlan0: send auth to 64:68:xx:xx:xx:xx (try 3/3)
  248. [78906.136000] wlan0: authentication with 64:68:xx:xx:xx:xx timed out
  249. [78917.516000] wlan0: authenticate with 64:68:xx:xx:xx:xx
  250. [78917.524000] wlan0: send auth to 64:68:xx:xx:xx:xx (try 1/3)
  251. [78917.552000] wlan0: send auth to 64:68:xx:xx:xx:xx (try 2/3)
  252. [78917.740000] wlan0: send auth to 64:68:xx:xx:xx:xx (try 3/3)
  253. [78917.864000] wlan0: authentication with 64:68:xx:xx:xx:xx timed out
  254. [78937.956000] wlan0: authenticate with 64:68:xx:xx:xx:xx
  255. [78937.964000] wlan0: direct probe to 64:68:xx:xx:xx:xx (try 1/3)
  256. [78938.172000] wlan0: direct probe to 64:68:xx:xx:xx:xx (try 2/3)
  257. [78938.380000] wlan0: direct probe to 64:68:xx:xx:xx:xx (try 3/3)
  258. [78938.588000] wlan0: authentication with 64:68:xx:xx:xx:xx timed out
  259. [78969.716000] wlan0: authenticate with 64:68:xx:xx:xx:xx
  260. [78969.720000] wlan0: send auth to 64:68:xx:xx:xx:xx (try 1/3)
  261. [78969.832000] wlan0: send auth to 64:68:xx:xx:xx:xx (try 2/3)
  262. [78969.944000] wlan0: send auth to 64:68:xx:xx:xx:xx (try 3/3)
  263. [78970.056000] wlan0: authentication with 64:68:xx:xx:xx:xx timed out
  264. [79030.744000] wlan0: authenticate with 64:68:xx:xx:xx:xx
  265. [79030.752000] wlan0: send auth to 64:68:xx:xx:xx:xx (try 1/3)
  266. [79030.756000] wlan0: authenticated
  267. [79030.760000] brcmsmac bcma0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
  268. [79030.768000] brcmsmac bcma0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
  269. [79030.776000] brcmsmac bcma0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
  270. [79030.788000] wlan0: associate with 64:68:xx:xx:xx:xx (try 1/3)
  271. [79030.796000] wlan0: RX AssocResp from 64:68:xx:xx:xx:xx (capab=0x411 status=0 aid=2)
  272. [79030.804000] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
  273. [79030.812000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
  274. [79030.820000] wlan0: associated
  275. [80304.312000] usb 1-1.1: USB disconnect, device number 6
  276. [80311.424000] usb 1-1.1: new high-speed USB device number 7 using ehci-platform
  277. [80311.536000] usb-storage 1-1.1:1.0: USB Mass Storage device detected
  278. [80311.544000] scsi4 : usb-storage 1-1.1:1.0
  279. [80313.528000] usb 1-1.1: USB disconnect, device number 7
  280. [80318.336000] usb 1-1.1: new high-speed USB device number 8 using ehci-platform
  281. [80318.472000] usb-storage 1-1.1:1.6: USB Mass Storage device detected
  282. [80318.480000] scsi5 : usb-storage 1-1.1:1.6
  283. [80319.488000] scsi 5:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
  284. [80319.520000] sd 5:0:0:0: [sda] Attached SCSI removable disk
  285. [80604.088000] usb 1-1.1: USB disconnect, device number 8
  286. [80612.224000] usb 1-1.1: new high-speed USB device number 9 using ehci-platform
  287. [80612.336000] usb-storage 1-1.1:1.0: USB Mass Storage device detected
  288. [80612.344000] scsi6 : usb-storage 1-1.1:1.0
  289. [80614.328000] usb 1-1.1: USB disconnect, device number 9
  290. [80619.392000] usb 1-1.1: new high-speed USB device number 10 using ehci-platform
  291. [80619.548000] usb-storage 1-1.1:1.6: USB Mass Storage device detected
  292. [80619.560000] scsi7 : usb-storage 1-1.1:1.6
  293. [80620.572000] scsi 7:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
  294. [80620.600000] sd 7:0:0:0: [sda] Attached SCSI removable disk
RAW Paste Data