Parameters:
Executing: bash "/home/pi/RetroPie/roms/windows/Windows 98/+Start Windows 98.sh"
LOG: Early LOG Init complete
LOG: Redirected "vesa modelist width limit" from [dosbox] to [video] section
LOG: Redirected "vesa modelist height limit" from [dosbox] to [video] section
LOG: Migrated realnic from [ne2000] to [ethernet, pcap] section
LOG: Set ne2000 backend to pcap during migration
LOG: DOSBox-X's working directory: /home/pi
LOG: Logging init: beginning logging proper. This is the end of the early init logging
LOG: Logging: No logfile was given. All further logging will be discarded.
LOG: DOSBox-X version 2022.09.1 (Linux SDL2)
LOG: Host keyboard layout is now us (US English)
LOG: Mapper keyboard layout is now us (US English)
LOG: SDL2 reports desktop display mode 1280 x 720
LOG: The default output for the video system: opengl
LOG: Configured windowposition: -
LOG: SDL: Current window pixel format: SDL_PIXELFORMAT_ARGB8888
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: INFO: switched to full screen mode
LOG: ISA BCLK: 8333333.333Hz (25000000/3)
LOG: monopal: green,
LOG: Active save slot: 1 [Empty]
LOG: USING AVI+ZMBV
LOG: Max 1048576 sz 524288
LOG: Final 524288
LOG: SDLNet_TCP_Open: Couldn't connect to remote host
LOG: TiMidity: can't open control connection (host=127.0.0.1, port=7777)
fluidsynth: error: Failed to create PulseAudio connection
LOG: MIDI:fluidsynth: Can't create audio driver
LOG:          0 WARN  ALL:Failed to pin the sample data to RAM; swapping is possible.
LOG: MIDI:Opened device:synth
LOG: Pentium CMPXCHG8B emulation is enabled
LOG: VOODOO LFB now at d0000000
LOG: Serial1: BASE 3f8h
LOG: Serial2: BASE 2f8h
LOG: Parallel1: BASE 378h
LOG: MPU-401 Registering I/O ports as if IBM PC MPU-401 at base 330h
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: Allocated APM BIOS pm entry point at f000:ce40
LOG: Writing code to fce40
LOG: Writing code to fce60
LOG: ETHERNET: NE2000 Ethernet emulation backend selected: pcap
LOG: Using Network interface:
wlan0
(no description)
LOG: NE2000: Base=0x300 irq=10
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: ISA Plug & Play BIOS enabled
LOG: VGA ROM BIOS init callback
LOG: pixratio 1.000, dw false, dh false
LOG: Aspect ratio: 640 x 480  xToY=1.333 yToX=0.750
LOG: menuScale=1
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: font texture id=2 will make 128 x 256
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: WARNING: No translation support (to host) for code page 0
LOG:     443656 ERROR BIOS:Keyboard layout file auto not found
LOG:     443656 ERROR BIOS:Keyboard layout file auto not found
LOG: XMS: 50 handles allocated for use by the DOS environment
LOG: EMS page frame at 0xe000-0xefff
LOG: COMMAND.COM env size:             720 bytes
LOG: COMMAND.COM environment block:    0x0701 sz=0x002d
LOG: COMMAND.COM main body (PSP):      0x072f sz=0x009a
LOG: COMMAND.COM stack:                0x0749
LOG: pixratio 1.350, dw false, dh false
LOG: Aspect ratio: 720 x 540  xToY=1.333 yToX=0.750
LOG: menuScale=1
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: font texture id=2 will make 128 x 256
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: IDE: index 0 slave=0
LOG: FAT: Partition type is MBR (IBM PC)
LOG: Mounted FAT volume is FAT16 with 64439 clusters
LOG: Mapping BIOS DISK C/H/S 1023/64/63 as IDE 4092/16/63
LOG: Converting drive Y: to FAT...
LOG: WARNING: Unable to reduce heads to 16 and below
LOG: If at all possible, please consider using INT 13h geometry with a head
LOG: count that is easier to map to the BIOS, like 240 heads or 128 heads/track.
LOG: Some OSes, such as Windows 95, will not enable their 32-bit IDE driver if
LOG: a clean mapping does not exist between IDE and BIOS geometry.
LOG: Mapping BIOS DISK C/H/S 32/255/63 as IDE 510/16/63 (non-straightforward mapping)
LOG: Booting guest OS stack_seg=0x7000 load_seg=0x07c0
LOG: Removing UMB block 0xcc00-0xdfff
LOG: Alright: DOS kernel shutdown, booting a guest OS
LOG:   CS:IP=0000:7c00 SS:SP=7000:0100 AX=0000 BX=7c00 CX=0001 DX=0080
LOG:     454714 ERROR BIOS:Disk 0 not active
LOG:     454760 ERROR BIOS:INT15:Unknown call ax=4101
LOG: pixratio 1.200, dw true, dh false
LOG: Aspect ratio: 640 x 480  xToY=1.333 yToX=0.750
LOG: menuScale=1
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: font texture id=2 will make 128 x 256
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG:     473451 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473452 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473453 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473454 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473455 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473456 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473457 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473458 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473459 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473460 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473461 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473462 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473463 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473464 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473465 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     473466 ERROR BIOS:INT15:Unknown call ax=D800
LOG:     475895 ERROR CPU:Illegal Unhandled Interrupt Called 68
LOG: pixratio 1.350, dw false, dh false
LOG: Aspect ratio: 720 x 540  xToY=1.333 yToX=0.750
LOG: menuScale=1
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: font texture id=2 will make 128 x 256
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG:     492035 ERROR BIOS:INT16:Unhandled call 92
LOG:     492057 ERROR BIOS:INT15:Unknown call ax=C183
LOG: pixratio 1.200, dw true, dh false
LOG: Aspect ratio: 640 x 480  xToY=1.333 yToX=0.750
LOG: menuScale=1
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: font texture id=2 will make 128 x 256
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG:     621836 ERROR CPU:Illegal Unhandled Interrupt Called 68
LOG:     692360 ERROR BIOS:Disk 0 not active
LOG: INT13: Check Extensions Present for drive: 0x80
LOG: INT13: Check Extensions Present for drive: 0x81
LOG:     739172 ERROR CPU:Illegal Unhandled Interrupt Called 5C
LOG:     739173 ERROR CPU:Illegal Unhandled Interrupt Called 5C
LOG:     739174 ERROR CPU:Illegal Unhandled Interrupt Called 5C
LOG:     739175 ERROR CPU:Illegal Unhandled Interrupt Called 5C
LOG:     739176 ERROR CPU:Illegal Unhandled Interrupt Called 5C
LOG:     739177 ERROR CPU:Illegal Unhandled Interrupt Called 5C
LOG:     739178 ERROR CPU:Illegal Unhandled Interrupt Called 5C
LOG:     739179 ERROR CPU:Illegal Unhandled Interrupt Called 5C
LOG:     813659 ERROR CPU:Illegal Unhandled Interrupt Called 68
LOG: DOSBox-X has switched to max cycles, because of the setting: cycles=auto.
If the game runs too fast, try a fixed cycles amount in DOSBox-X's options.
LOG: Dynamic core warning: The guest OS/Application has just switched on 80386 paging, which is not supported by the dynamic core. The normal core will be used until paging is switched off again.
LOG:   13150492 ERROR CPU:Write 0 to rom at e00a0
LOG:   13150493 ERROR CPU:Write ffff to rom at e00a2
LOG:   13150514 ERROR CPU:Write ffff to rom at e00a2
LOG:   13150516 ERROR CPU:Write ffff to rom at e00a0
LOG:   13150532 ERROR CPU:Write 0 to rom at e08a0
LOG:   13150533 ERROR CPU:Write ffff to rom at e08a2
LOG:   13150554 ERROR CPU:Write ffff to rom at e08a2
LOG:   13150556 ERROR CPU:Write ffff to rom at e08a0
LOG:   13150673 ERROR CPU:Write 0 to rom at e10a0
LOG:   13150674 ERROR CPU:Write ffff to rom at e10a2
LOG:   13150695 ERROR CPU:Write ffff to rom at e10a2
LOG:   13150697 ERROR CPU:Write ffff to rom at e10a0
LOG:   13150713 ERROR CPU:Write 0 to rom at e18a0
LOG:   13150714 ERROR CPU:Write ffff to rom at e18a2
LOG:   13150735 ERROR CPU:Write ffff to rom at e18a2
LOG:   13150737 ERROR CPU:Write ffff to rom at e18a0
LOG:   13150854 ERROR CPU:Write 0 to rom at e20a0
LOG:   13150855 ERROR CPU:Write ffff to rom at e20a2
LOG:   13150876 ERROR CPU:Write ffff to rom at e20a2
LOG:   13150878 ERROR CPU:Write ffff to rom at e20a0
LOG:   13150894 ERROR CPU:Write 0 to rom at e28a0
LOG:   13150895 ERROR CPU:Write ffff to rom at e28a2
LOG:   13150916 ERROR CPU:Write ffff to rom at e28a2
LOG:   13150918 ERROR CPU:Write ffff to rom at e28a0
LOG:   13151035 ERROR CPU:Write 0 to rom at e30a0
LOG:   13151036 ERROR CPU:Write ffff to rom at e30a2
LOG:   13151057 ERROR CPU:Write ffff to rom at e30a2
LOG:   13151059 ERROR CPU:Write ffff to rom at e30a0
LOG:   13151075 ERROR CPU:Write 0 to rom at e38a0
LOG:   13151076 ERROR CPU:Write ffff to rom at e38a2
LOG:   13151097 ERROR CPU:Write ffff to rom at e38a2
LOG:   13151099 ERROR CPU:Write ffff to rom at e38a0
LOG:   13151216 ERROR CPU:Write 0 to rom at e40a0
LOG:   13151217 ERROR CPU:Write ffff to rom at e40a2
LOG:   13151238 ERROR CPU:Write ffff to rom at e40a2
LOG:   13151240 ERROR CPU:Write ffff to rom at e40a0
LOG:   13151256 ERROR CPU:Write 0 to rom at e48a0
LOG:   13151257 ERROR CPU:Write ffff to rom at e48a2
LOG:   13151278 ERROR CPU:Write ffff to rom at e48a2
LOG:   13151280 ERROR CPU:Write ffff to rom at e48a0
LOG:   13151397 ERROR CPU:Write 0 to rom at e50a0
LOG:   13151398 ERROR CPU:Write ffff to rom at e50a2
LOG:   13151419 ERROR CPU:Write ffff to rom at e50a2
LOG:   13151421 ERROR CPU:Write ffff to rom at e50a0
LOG:   13151437 ERROR CPU:Write 0 to rom at e58a0
LOG:   13151438 ERROR CPU:Write ffff to rom at e58a2
LOG:   13151459 ERROR CPU:Write ffff to rom at e58a2
LOG:   13151461 ERROR CPU:Write ffff to rom at e58a0
LOG:   13151578 ERROR CPU:Write 0 to rom at e60a0
LOG:   13151579 ERROR CPU:Write ffff to rom at e60a2
LOG:   13151600 ERROR CPU:Write ffff to rom at e60a2
LOG:   13151602 ERROR CPU:Write ffff to rom at e60a0
LOG:   13151618 ERROR CPU:Write 0 to rom at e68a0
LOG:   13151619 ERROR CPU:Write ffff to rom at e68a2
LOG:   13151640 ERROR CPU:Write ffff to rom at e68a2
LOG:   13151642 ERROR CPU:Write ffff to rom at e68a0
LOG:   13151759 ERROR CPU:Write 0 to rom at e70a0
LOG:   13151760 ERROR CPU:Write ffff to rom at e70a2
LOG:   13151781 ERROR CPU:Write ffff to rom at e70a2
LOG:   13151783 ERROR CPU:Write ffff to rom at e70a0
LOG:   13151799 ERROR CPU:Write 0 to rom at e78a0
LOG:   13151800 ERROR CPU:Write ffff to rom at e78a2
LOG:   13151821 ERROR CPU:Write ffff to rom at e78a2
LOG:   13151823 ERROR CPU:Write ffff to rom at e78a0
LOG:   13151940 ERROR CPU:Write 0 to rom at e80a0
LOG:   13151941 ERROR CPU:Write ffff to rom at e80a2
LOG:   13151962 ERROR CPU:Write ffff to rom at e80a2
LOG:   13151964 ERROR CPU:Write ffff to rom at e80a0
LOG:   13151980 ERROR CPU:Write 0 to rom at e88a0
LOG:   13151981 ERROR CPU:Write ffff to rom at e88a2
LOG:   13152002 ERROR CPU:Write ffff to rom at e88a2
LOG:   13152004 ERROR CPU:Write ffff to rom at e88a0
LOG:   13152121 ERROR CPU:Write 0 to rom at e90a0
LOG:   13152122 ERROR CPU:Write ffff to rom at e90a2
LOG:   13152143 ERROR CPU:Write ffff to rom at e90a2
LOG:   13152145 ERROR CPU:Write ffff to rom at e90a0
LOG:   13152161 ERROR CPU:Write 0 to rom at e98a0
LOG:   13152162 ERROR CPU:Write ffff to rom at e98a2
LOG:   13152183 ERROR CPU:Write ffff to rom at e98a2
LOG:   13152185 ERROR CPU:Write ffff to rom at e98a0
LOG:   13152302 ERROR CPU:Write 0 to rom at ea0a0
LOG:   13152303 ERROR CPU:Write ffff to rom at ea0a2
LOG:   13152324 ERROR CPU:Write ffff to rom at ea0a2
LOG:   13152326 ERROR CPU:Write ffff to rom at ea0a0
LOG:   13152342 ERROR CPU:Write 0 to rom at ea8a0
LOG:   13152343 ERROR CPU:Write ffff to rom at ea8a2
LOG:   13152364 ERROR CPU:Write ffff to rom at ea8a2
LOG:   13152366 ERROR CPU:Write ffff to rom at ea8a0
LOG:   13152483 ERROR CPU:Write 0 to rom at eb0a0
LOG:   13152484 ERROR CPU:Write ffff to rom at eb0a2
LOG:   13152505 ERROR CPU:Write ffff to rom at eb0a2
LOG:   13152507 ERROR CPU:Write ffff to rom at eb0a0
LOG:   13152523 ERROR CPU:Write 0 to rom at eb8a0
LOG:   13152524 ERROR CPU:Write ffff to rom at eb8a2
LOG:   13152545 ERROR CPU:Write ffff to rom at eb8a2
LOG:   13152547 ERROR CPU:Write ffff to rom at eb8a0
LOG:   13152664 ERROR CPU:Write 0 to rom at ec0a0
LOG:   13152665 ERROR CPU:Write ffff to rom at ec0a2
LOG:   13152686 ERROR CPU:Write ffff to rom at ec0a2
LOG:   13152688 ERROR CPU:Write ffff to rom at ec0a0
LOG:   13152704 ERROR CPU:Write 0 to rom at ec8a0
LOG:   13152705 ERROR CPU:Write ffff to rom at ec8a2
LOG:   13152726 ERROR CPU:Write ffff to rom at ec8a2
LOG:   13152728 ERROR CPU:Write ffff to rom at ec8a0
LOG:   13152845 ERROR CPU:Write 0 to rom at ed0a0
LOG:   13152846 ERROR CPU:Write ffff to rom at ed0a2
LOG:   13152867 ERROR CPU:Write ffff to rom at ed0a2
LOG:   13152869 ERROR CPU:Write ffff to rom at ed0a0
LOG:   13152885 ERROR CPU:Write 0 to rom at ed8a0
LOG:   13152886 ERROR CPU:Write ffff to rom at ed8a2
LOG:   13152907 ERROR CPU:Write ffff to rom at ed8a2
LOG:   13152909 ERROR CPU:Write ffff to rom at ed8a0
LOG:   13153026 ERROR CPU:Write 0 to rom at ee0a0
LOG:   13153027 ERROR CPU:Write ffff to rom at ee0a2
LOG:   13153048 ERROR CPU:Write ffff to rom at ee0a2
LOG:   13153050 ERROR CPU:Write ffff to rom at ee0a0
LOG:   13153066 ERROR CPU:Write 0 to rom at ee8a0
LOG:   13153067 ERROR CPU:Write ffff to rom at ee8a2
LOG:   13153088 ERROR CPU:Write ffff to rom at ee8a2
LOG:   13153090 ERROR CPU:Write ffff to rom at ee8a0
LOG:   13153207 ERROR CPU:Write 0 to rom at ef0a0
LOG:   13153208 ERROR CPU:Write ffff to rom at ef0a2
LOG:   13153229 ERROR CPU:Write ffff to rom at ef0a2
LOG:   13153231 ERROR CPU:Write ffff to rom at ef0a0
LOG:   13153247 ERROR CPU:Write 0 to rom at ef8a0
LOG:   13153248 ERROR CPU:Write ffff to rom at ef8a2
LOG:   13153269 ERROR CPU:Write ffff to rom at ef8a2
LOG:   13153271 ERROR CPU:Write ffff to rom at ef8a0
LOG: Plug & Play OS reports itself active
LOG: PNP OS changed I/O read port to 0x277 (from 0x20B)
LOG:   40002300 ERROR BIOS:INT1A:PCI BIOS: unknown function b10e (0 2b0 15a1)
LOG: VOODOO LFB now at ff000000
LOG: VOODOO LFB now at d0000000
LOG: APM BIOS: Connected to 32-bit protected mode interface
LOG: APM BIOS negotiated to v1.2
LOG: Unknown APM BIOS call AX=5312
LOG: enable APM for device    1
LOG: engage APM for device    1
LOG: enable APM for device    1
LOG: Unknown APM BIOS call AX=5311
LOG:   44301788 ERROR INT10:Unhandled VESA Function 15
LOG:   44394279 ERROR INT10:Unhandled VESA Function 10
LOG:   45453667 ERROR CPU:Illegal Unhandled Interrupt Called 20
LOG:   45454033 ERROR CPU:Illegal Unhandled Interrupt Called 20
LOG:   51683147 ERROR BIOS:INT15:Unknown call ax=F963
LOG: INT 15h mouse initialized to 3-byte protocol
LOG: INT 15h mouse reset
LOG: INT 15h reporting mouse device ID 0x03
LOG: BX_ERROR: DCR write, loopback mode selected
LOG:  437874788 ERROR MOUSE:Unhandled videomode 79 on reset
LOG: pixratio 1.000, dw false, dh false
LOG: Aspect ratio: 640 x 480  xToY=1.333 yToX=0.750
LOG: menuScale=1
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: font texture id=2 will make 128 x 256
LOG: Screen report: Method 'None' (-1.000 x -1.000 pixels) at (0.000 x 0.000) (-1.000 x -1.000 mm) (-0.039 x -0.039 in) (-1.000 x -1.000 DPI)
LOG: Unknown APM BIOS call AX=5311