API tools faq
paste
Guest User

Untitled

a guest
May 12th, 2021
80
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 64.45 KB | None | 0 0
raw download clone embed print report
  1. [SERIAL/DIRECT] CONNECTED TO PORT /dev/cu.usbserial-AC01I1LI (115200-8N1)
  2.  
  3. [88]HELLO! BOOT0 is starting May 13 2020 14:10:04!
  4. [93]BOOT0 commit : 593cf83
  5. [96]set pll start
  6. [99]periph0 has been enabled
  7. [102]set pll end
  8. [103]unknow PMU
  9. [105]PMU: AXP806
  10. [112]vaild para:16 select dram para4
  11. [116]board init ok
  12. [118]DRAM BOOT DRIVE INFO: V0.52
  13. [121]the chip id is 0x5000
  14. [124]chip id check OK
  15. [126]DRAM_VCC set to 1500 mv
  16. [130]read_calibration error
  17. [134]read_calibration error
  18. [138]read_calibration error
  19. [142]read_calibration error
  20. [146]read_calibration error
  21. [150]read_calibration error
  22. [154]read_calibration error
  23. [158]read_calibration error
  24. [162]read_calibration error
  25. [165]read_calibration error
  26. [168]retraining final error
  27. [175][AUTO DEBUG]32bit,1 ranks training success!
  28. [182]DRAM CLK =696 MHZ
  29. [184]DRAM Type =3 (3:DDR3,4:DDR4,7:LPDDR3,8:LPDDR4)
  30. [190]Actual DRAM SIZE =2048 M
  31. [193]DRAM SIZE =2048 MBytes, para1 = 30fb, para2 = 8000000, dram_tpr13 = 6041
  32. [206]DRAM simple test OK.
  33. [209]rtc standby flag is 0x0, super standby flag is 0x0
  34. [214]dram size =2048
  35. [216]*****dram handle ok****
  36. [220]card no is 2
  37. [222]sdcard 2 line count 8
  38. [225][mmc]: mmc driver ver 2019-12-19 10:41
  39. [229][mmc]: set f_max to 50M, set f_max_ddr to 50M
  40. [234][mmc]: mmc 2 bias 4
  41. [242][mmc]: ***Try MMC card 2***
  42. [299][mmc]: MMC 5.1
  43. [301][mmc]: HSDDR52/DDR50 8 bit
  44. [304][mmc]: 50000000 Hz
  45. [307][mmc]: 7457 MB
  46. [309][mmc]: ***SD/MMC 2 init OK!!!***
  47. [373]Loading boot-pkg Succeed(index=0).
  48. [377]Entry_name = u-boot
  49. [386]Entry_name = monitor
  50. [390]Entry_name = dtbo
  51. [393]Entry_name = dtb
  52. [396]tunning data addr:0x4a0003e8
  53. [400]Jump to second Boot.
  54. NOTICE: BL3-1: v1.0(debug):73700cc
  55. NOTICE: BL3-1: Built : 17:21:20, 2020-05-13
  56. NOTICE: BL3-1 commit: 8
  57. ERROR: Error initializing runtime service tspd_fast
  58. NOTICE: BL3-1: Preparing for EL3 exit to normal world
  59. NOTICE: BL3-1: Next image address = 0x4a000000
  60. ÿOTICE: BL3-1: Next image spsr = 0x1d3
  61.  
  62. U-Boot 2018.05-00001-ga5809a8-dirty (Jul 10 2020 - 13:35:29 +0800) Allwinner Technology
  63.  
  64. [00.476]CPU: Allwinner Family
  65. [00.479]Model: sun50iw9
  66. I2C: ready
  67. [00.484]Relocation Offset is: 75ec5000
  68. [00.523]secure enable bit: 0
  69. [00.525]pmu_axp152_probe pmic_bus_read fail
  70. [00.530]PMU: AXP806
  71. [00.533]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=400Mhz
  72. [00.722]sunxi overlay merged okqv
  73. [00.726]drv_disp_init
  74. [00.756]__clk_enable: clk is null.
  75. [00.763]drv_disp_init finish
  76. [00.765]gic: sec monitor mode
  77. [00.789]flash init start
  78. [00.792]workmode = 0,storage type = 2
  79. [00.795]MMC: 2
  80. [00.796]get mem for descripter OK !
  81. [00.806]get sdc2 sdc_boot0_sup_1v8 fail.
  82. [00.810]io is 1.8V
  83.  
  84. [00.875]already at HSSDR52_SDR25 mode
  85. [00.880]sunxi flash init ok
  86. [fd650] show_string: boot 8
  87. [00.890]Loading Environment from SUNXI_FLASH... OK
  88. [00.907]usb burn from boot
  89. delay time 0
  90. weak:otg_phy_config
  91. [00.920]usb prepare ok
  92. [01.723]overtime
  93. [01.727]do_burn_from_boot usb : no usb exist
  94. [01.731]boot_gui_init:start
  95. FAT: Misaligned buffer address (bbe81078)
  96. 32 bytes read in 4 ms (7.8 KiB/s)
  97. [02.037]boot_gui_init:finish
  98. [02.040]bmp_name=bootlogo.bmp
  99. 2764856 bytes read in 19 ms (138.8 MiB/s)
  100. [02.082]hsddr 2-50000000
  101. [02.084]hs200 5-200000000
  102. [02.086]hs400 4-150000000
  103. [02.088]get max-frequency ok 100000000 Hz
  104. [02.092]0 0 0: 0 0 0
  105. [02.097]update dts
  106. ** Unrecognized filesystem type **
  107. [02.149]load file(ULI/factory/rootwait init.txt) error.
  108. ** Unrecognized filesystem type **
  109. [02.164]load file(ULI/factory/snum.txt) error.
  110. [02.168]name in map mac
  111. ** Unrecognized filesystem type **
  112. [02.180]load file(ULI/factory/wifi_mac.txt) error.
  113. ** Unrecognized filesystem type **
  114. [02.194]load file(ULI/factory/bt_mac.txt) error.
  115. ** Unrecognized filesystem type **
  116. [02.208]load file(ULI/factory/selinux.txt) error.
  117. ** Unrecognized filesystem type **
  118. [02.222]load file(ULI/factory/specialstr.txt) error.
  119. [02.236]update part info
  120. [02.454]update bootcmd
  121. [02.456]No ethernet found.
  122. Hit any key to stop autoboot: 0
  123. [02.625]Starting kernel ...
  124.  
  125. [02.627]mmc exit start
  126. [02.686]mmc 2 exit ok
  127. [ 0.000000] Booting Linux on physical CPU 0x0
  128. [ 0.000000] Linux version 4.9.170 (hanxiao@ubuntu2) (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) ) #14 SMP PREEMPT Thu Jul 30 15:26:43 CST 2020
  129. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  130. [ 0.000000] bootconsole [earlycon0] enabled
  131. [ 0.000000] disp reserve base 0xbbf2d9c0 ,size 0x384000
  132. [ 0.000000] cma: Reserved 64 MiB at 0x00000000b7c00000
  133. [ 0.000000] On node 0 totalpages: 524288
  134. [ 0.000000] DMA zone: 8192 pages used for memmap
  135. [ 0.000000] DMA zone: 0 pages reserved
  136. [ 0.000000] DMA zone: 524288 pages, LIFO batch:31
  137. [ 0.000000] psci: probing for conduit method from DT.
  138. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  139. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  140. [ 0.000000] psci: Trusted OS migration not required
  141. [ 0.000000] psci: SMC Calling Convention v1.0
  142. [ 0.000000] percpu: Embedded 22 pages/cpu @ffffffc07feff000 s49280 r8192 d32640 u90112
  143. [ 0.000000] pcpu-alloc: s49280 r8192 d32640 u90112 alloc=22*4096
  144. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  145. [ 0.000000] Detected VIPT I-cache on CPU0
  146. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  147. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516096
  148. [ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x05000000 initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p4 rootwait init=/init partitions=bootloader@mmcblk0p1:env@mmcblk0p2:boot@mmcblk0p3:super@mmcblk0p4:misc@mmcblk0p5:recovery@mmcblk0p6:cache@mmcblk0p7:vbmeta@mmcblk0p8:vbmeta_system@mmcblk0p9:vbmeta_vendor@mmcblk0p10:metadata@mmcblk0p11:private@mmcblk0p12:frp@mmcblk0p13:empty@mmcblk0p14:media_data@mmcblk0p15:Reserve0@mmcblk0p16:UDISK@mmcblk0p17 cma=64M snum=8c0014116702c90204d mac_addr=04:82:00:71:4C:72 wifi_mac= bt_mac= selinux=0 specialstr= gpt=1 androidboot.mode=normal androidboot.serialno=8c0014116702c90204d androidboot.hardware=sun50iw9p1 boot_type=2 androidboot.boot_type=2 androidboot.secure_os_exist=0 gpt=1 uboot_message=2018.05-00001-ga5809a8-dirty(07/10/2020-13:35:29) disp_reserve=3686400,0xbbf2d9c0 bootreason=unknow selinux=1 androidboot.selinux=permissive androidboot.dtbo_idx=0,1,2 buildvariant=userdebug
  149. [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  150. [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
  151. [ 0.000000] log_buf_len min size: 16384 bytes
  152. [ 0.000000] log_buf_len: 32768 bytes
  153. [ 0.000000] early log buf free: 13888(84%)
  154. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  155. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  156. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  157. [ 0.000000] Memory: 1957388K/2097152K available (8574K kernel code, 1244K rwdata, 3476K rodata, 2560K init, 497K bss, 74228K
  158. reserved, 65536K cma-reserved)
  159. [ 0.000000] Virtual kernel memory layout:
  160. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  161. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
  162. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088e0000 ( 8576 KB)
  163. [ 0.000000] .rodata : 0xffffff80088e0000 - 0xffffff8008c50000 ( 3520 KB)
  164. [ 0.000000] .init : 0xffffff8008c50000 - 0xffffff8008ed0000 ( 2560 KB)
  165. [ 0.000000] .data : 0xffffff8008ed0000 - 0xffffff8009007008 ( 1245 KB)
  166. [ 0.000000] .bss : 0xffffff8009007008 - 0xffffff8009083770 ( 498 KB)
  167. [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
  168. [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
  169. [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
  170. [ 0.000000] 0xffffffbf00000000 - 0xffffffbf02000000 ( 32 MB actual)
  171. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
  172. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  173. [ 0.000000] Preemptible hierarchical RCU implementation.
  174. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  175. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  176. [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  177. [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).
  178. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  179. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  180. [ 0.008210] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
  181. [ 0.018198] pid_max: default: 32768 minimum: 301
  182. [ 0.023010] Security Framework initialized
  183. [ 0.026877] SELinux: Initializing.
  184. [ 0.030462] SELinux: Starting in permissive mode
  185. [ 0.035126] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  186. [ 0.041696] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  187. [ 0.050121] sched-energy: CPU device node has no sched-energy-costs
  188. [ 0.055087] Invalid sched_group_energy for CPU0
  189. [ 0.059549] CPU0: update cpu_capacity 1024
  190. [ 0.073678] ASID allocator initialised with 32768 entries
  191. [ 0.092476] BOOTEVENT: 92.461457: ON
  192. [ 0.120651] Detected VIPT I-cache on CPU1
  193. [ 0.120706] Invalid sched_group_energy for CPU1
  194. [ 0.120709] CPU1: update cpu_capacity 1024
  195. [ 0.120713] CPU1: Booted secondary processor [410fd034]
  196. [ 0.144041] Detected VIPT I-cache on CPU2
  197. [ 0.144082] Invalid sched_group_energy for CPU2
  198. [ 0.144085] CPU2: update cpu_capacity 1024
  199. [ 0.144088] CPU2: Booted secondary processor [410fd034]
  200. [ 0.167453] Detected VIPT I-cache on CPU3
  201. [ 0.167493] Invalid sched_group_energy for CPU3
  202. [ 0.167496] CPU3: update cpu_capacity 1024
  203. [ 0.167499] CPU3: Booted secondary processor [410fd034]
  204. [ 0.167593] Brought up 4 CPUs
  205. [ 0.201591] SMP: Total of 4 processors activated.
  206. [ 0.206281] CPU features: detected feature: 32-bit EL0 Support
  207. [ 0.212086] CPU features: detected feature: Kernel page table isolation (KPTI)
  208. [ 0.222970] CPU: All CPU(s) started at EL1
  209. [ 0.223358] alternatives: patching kernel code
  210. [ 0.227957] Invalid sched_group_energy for CPU3
  211. [ 0.232284] CPU3: update max cpu_capacity 1024
  212. [ 0.236700] Invalid sched_group_energy for Cluster3
  213. [ 0.241552] Invalid sched_group_energy for CPU2
  214. [ 0.246059] Invalid sched_group_energy for Cluster2
  215. [ 0.250912] Invalid sched_group_energy for CPU1
  216. [ 0.255419] Invalid sched_group_energy for Cluster1
  217. [ 0.260272] Invalid sched_group_energy for CPU0
  218. [ 0.264779] Invalid sched_group_energy for Cluster0
  219. [ 0.270386] CPU1: update max cpu_capacity 1024
  220. [ 0.274832] devtmpfs: initialized
  221. [ 0.316753] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  222. [ 0.316855] futex hash table entries: 1024 (order: 5, 131072 bytes)
  223. [ 0.319167] atomic64_test: passed
  224. [ 0.319213] pinctrl core: initialized pinctrl subsystem
  225. [ 0.320588] NET: Registered protocol family 16
  226. [ 0.324795] dump_class_init,861, success
  227. [ 0.344041] cpuidle: using governor menu
  228. [ 0.345695] sunxi iommu: irq = 8
  229. [ 0.346497] vdso: 2 pages (1 code @ ffffff80088e8000, 1 data @ ffffff8008ed4000)
  230. [ 0.346575] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  231. [ 0.349954] DMA: preallocated 256 KiB pool for atomic allocations
  232. [ 0.355993] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver
  233. [ 0.376968] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver
  234. [ 0.381533] iommu: Adding device 1c0e000.ve to group 0
  235. [ 0.382178] iommu: Adding device 1c00000.vp9 to group 0
  236. [ 0.394812] iommu: Adding device 1000000.disp to group 0
  237. [ 0.396728] iommu: Adding device 1480000.g2d to group 0
  238. [ 0.400505] iommu: Adding device csi0 to group 0
  239. [ 0.401080] iommu: Adding device csi1 to group 0
  240. [ 0.402542] iommu: Adding device 6600800.vind:scaler@0 to group 0
  241. [ 0.403266] iommu: Adding device 6600800.vind:scaler@1 to group 0
  242. [ 0.409422] iommu: Adding device 6600800.vind:scaler@2 to group 0
  243. [ 0.415491] iommu: Adding device 6600800.vind:scaler@3 to group 0
  244. [ 0.421566] iommu: Adding device 6600800.vind:scaler@4 to group 0
  245. [ 0.427630] iommu: Adding device 6600800.vind:scaler@5 to group 0
  246. [ 0.434414] iommu: Adding device vinc0 to group 0
  247. [ 0.438558] iommu: Adding device vinc1 to group 0
  248. [ 0.444370] iommu: Adding device 1420000.deinterlace to group 0
  249. [ 0.487004] pwm module init!
  250. [ 0.492022] sunxi-pm debug v3.10
  251. [ 0.493256] SCSI subsystem initialized
  252. [ 0.493691] usbcore: registered new interface driver usbfs
  253. [ 0.493827] usbcore: registered new interface driver hub
  254. [ 0.494008] usbcore: registered new device driver usb
  255. [ 0.494224] sunxi_i2c_adap_init()2522 - init
  256. [ 0.497366] sunxi_i2c_probe()2209 - [i2c3] warning: failed to get regulator id
  257. [ 0.504051] sunxi_i2c_probe()2271 - [i2c3] twi_drv_used = 0
  258. [ 0.509498] sunxi_i2c_probe()2275 - [i2c3] twi_pkt_interval = 0
  259. [ 0.515393] twi3 supply twi not found, using dummy regulator
  260. [ 0.521113] twi_request_gpio()452 - [i2c3] init name: twi3
  261. [ 0.527340] sunxi_i2c_probe()2209 - [i2c5] warning: failed to get regulator id
  262. [ 0.533760] sunxi_i2c_probe()2271 - [i2c5] twi_drv_used = 0
  263. [ 0.539235] sunxi_i2c_probe()2275 - [i2c5] twi_pkt_interval = 0
  264. [ 0.545112] twi5 supply twi not found, using dummy regulator
  265. [ 0.550834] twi_request_gpio()452 - [i2c5] init name: twi5
  266. [ 0.556711] axp20x-i2c 5-0036: AXP20x variant AXP806 found
  267. [ 0.575166] axp806-aldo2: Bringing 700000uV into 3300000-3300000uV
  268. [ 0.579006] axp806-aldo3: Bringing 700000uV into 3300000-3300000uV
  269. [ 0.580269] random: fast init done
  270. [ 0.596617] axp20x-i2c 5-0036: AXP20X driver loaded
  271. [ 0.597196] media: Linux media interface: v0.10
  272. [ 0.597309] Linux video capture interface: v2.00
  273. [ 0.598645] ion_parse_dt_heap_common: id 0 type 0 name sys_user align 1000
  274. [ 0.598969] ion_parse_dt_heap_common: id 4 type 4 name cma align 1000
  275. [ 0.604793] ion_parse_dt_heap_common: id 6 type 6 name secure align 1000
  276. [ 0.611615] drm config service not available: FFFFFFFF
  277. [ 0.616744] Advanced Linux Sound Architecture Driver Initialized.
  278. [ 0.623231] Bluetooth: Core ver 2.22
  279. [ 0.626090] NET: Registered protocol family 31
  280. [ 0.630394] Bluetooth: HCI device and connection manager initialized
  281. [ 0.636729] Bluetooth: HCI socket layer initialized
  282. [ 0.641570] Bluetooth: L2CAP socket layer initialized
  283. [ 0.646640] Bluetooth: SCO socket layer initialized
  284. [ 0.652403] [DISP]disp_module_init
  285. [ 0.656296] [DISP] disp_init,line:2216:
  286. [ 0.658481] smooth display screen:0 type:4 mode:10
  287. [ 0.674797] [DISP]disp_module_init finish
  288. [ 0.676416] acx00_detect, l:429, twi_id:3, adapter->nr:3
  289. [ 0.676697] acx00_i2c_probe,l:282
  290. [ 0.676880] [ac200] pwm is NULL! Just initialize it.
  291. [ 0.681711] [ac200] pwm enable
  292. [ 0.683929] [ac200] pwm is initialized
  293. [ 0.687717] acx00_init_work,l:130
  294. [ 0.690030] sunxi_i2c_do_xfer()1935 - [i2c5] incomplete xfer (status: 0x20, dev addr: 0x10)
  295. [ 0.690532] of_property_read_string ac200.tv_regulator_name fail
  296. [ 0.690536] [ac200] get ave_regulator_name failed!
  297. [ 0.699320] clocksource: Switched to clocksource arch_sys_counter
  298. [ 0.699584] VFS: Disk quotas dquot_6.6.0
  299. [ 0.699702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  300. [ 0.702603] udc_init,0
  301. [ 0.703764] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
  302. [ 0.703960] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
  303. [ 0.704261] NET: Registered protocol family 2
  304. [ 0.729553] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  305. [ 0.729682] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  306. [ 0.729945] TCP: Hash tables configured (established 16384 bind 16384)
  307. [ 0.730041] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  308. [ 0.730089] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  309. [ 0.730506] NET: Registered protocol family 1
  310. [ 0.730825] Trying to unpack rootfs image as initramfs...
  311. [ 0.761585] Freeing initrd memory: 752K
  312. [ 0.763299] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  313. [ 0.766158] audit: initializing netlink subsys (disabled)
  314. [ 0.766241] audit: type=2000 audit(0.669:1): initialized
  315. [ 0.767216] workingset: timestamp_bits=45 maHÖ®V%$Y®ZW–.$W–®®ZË “‰ë+V$¥[XµK’&S§¥C¡+HH0.833478] io scheduler noop registered
  316. [ 0.833482] io scheduler deadline registered
  317. [ 0.833765] io scheduler cfq registered (default)
  318. [ 0.835763] failed to get standby led pin assign
  319. [ 0.835867] gpio_pin_1(230) gpio_is_valid
  320. [ 0.836189] gpio_pin_2(231) gpio_is_valid
  321. [ 0.836667] gpio name is PH6, ret = 0
  322. [ 0.836892] gpio name is PH7, ret = 0
  323. [ 0.837071] gpio_init finish with uesd
  324. [ 0.840128] uart uart0: get regulator failed
  325. [ 0.840361] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI
  326. [ 0.840382] sw_console_setup()1707 - console setup baud 115200 parity n bits 8, flow n
  327. [ 0.878471] console [ttyS0] enabled
  328. [ 0.878471] console [ttyS0] enabled
  329. [ 0.904669] bootconsole [earlycon0] disabled
  330. [ 0.904669] bootconsole [earlycon0] disabled
  331. [ 0.913330] acx00_init_work,l:137
  332. [ 0.913930] uart uart1: get regulator failed
  333. [ 0.914171] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI
  334. [ 0.915451] misc dump reg init
  335. [ 0.916842] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100
  336. [ 0.917237] Unable to detect cache hierarchy for CPU 0
  337. [ 0.933020] brd: module loaded
  338. [ 0.942010] loop: module loaded
  339. [ 0.943024] zram: Added device: zram0
  340. [ 0.943209] [NAND][NE] Not found valid nand node on dts
  341. [ 0.943888] Boot type 2
  342. [ 0.944552] sunxi-bt soc@03000000:bt: Missing bt_power.
  343. [ 0.944560] sunxi-bt soc@03000000:bt: bt_power_name ((null))
  344. [ 0.944566] sunxi-bt soc@03000000:bt: Missing bt_io_regulator.
  345. [ 0.944571] sunxi-bt soc@03000000:bt: io_regulator_name ((null))
  346. [ 0.944646] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0
  347. [ 0.944725] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed!
  348. [ 0.945648] sunxi-wlan soc@03000000:wlan: wlan_busnum (1)
  349. [ 0.945657] sunxi-wlan soc@03000000:wlan: Missing wlan_power.
  350. [ 0.945662] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null))
  351. [ 0.945668] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator.
  352. [ 0.945674] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null))
  353. [ 0.945704] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0
  354. [ 0.945759] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed
  355. [ 0.945765] sunxi-wlan soc@03000000:wlan: get gpio power_en failed
  356. [ 0.945784] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0
  357. [ 0.946946] [ADDR_MGT] addr_mgt_probe: success.
  358. [ 1.106235] libphy: Fixed MDIO Bus: probed
  359. [ 1.110870] tun: Universal TUN/TAP device driver, 1.6
  360. [ 1.116567] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  361. [ 1.124891] gmac-power0: NULL
  362. [ 1.128270] gmac-power1: NULL
  363. [ 1.131618] gmac-power2: NULL
  364. [ 1.135919] PPP generic driver version 2.4.2
  365. [ 1.141057] PPP BSD Compression module registered
  366. [ 1.146380] PPP Deflate Compression module registered
  367. [ 1.152095] PPP MPPE Compression module registered
  368. [ 1.157502] NET: Registered protocol family 24
  369. [ 1.162542] PPTP driver version 0.8.5
  370. [ 1.167054] usbcore: registered new interface driver r8152
  371. [ 1.173334] usbcore: registered new interface driver asix
  372. [ 1.179523] usbcore: registered new interface driver ax88179_178a
  373. [ 1.186463] usbcore: registered new interface driver cdc_ether
  374. [ 1.193115] usbcore: registered new interface driver net1080
  375. [ 1.199567] usbcore: registered new interface driver cdc_subset
  376. [ 1.206327] usbcore: registered new interface driver zaurus
  377. [ 1.212720] usbcore: registered new interface driver cdc_ncm
  378. [ 1.219102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  379. [ 1.226844] get drv_vbus is fail, 84
  380. [ 1.230883] get ehci0-controller, regulator_io is no nocare
  381. [ 1.237480] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff8009070980, 0x:ffffff8009c4b000,
  382. irq_no:11d
  383. [ 1.251232] sunxi-ehci 5101000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  384. [ 1.261462] sunxi-ehci 5101000.ehci0-controller: new USB bus registered, assigned bus number 1
  385. [ 1.271668] sunxi-ehci 5101000.ehci0-controller: irq 285, io mem 0x491de059
  386. [ 1.292670] sunxi-ehci 5101000.ehci0-controller: USB 0.0 started, EHCI 1.00
  387. [ 1.301713] hub 1-0:1.0: USB hub found
  388. [ 1.306010] hub 1-0:1.0: 1 port detected
  389. [ 1.311195] get ehci1-controller, regulator_io is no nocare
  390. [ 1.317815] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff8009070cc8, 0x:ffffff8009ce8000,
  391. irq_no:11f
  392. [ 1.331588] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  393. [ 1.341801] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 2
  394. [ 1.351763] sunxi-ehci 5200000.ehci1-controller: irq 287, io mem 0x4e247f05
  395. [ 1.372670] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00
  396. [ 1.381579] hub 2-0:1.0: USB hub found
  397. [ 1.385872] hub 2-0:1.0: 1 port detected
  398. [ 1.391036] get drv_vbus is fail, 84
  399. [ 1.395079] get ehci2-controller, regulator_io is no nocare
  400. [ 1.401655] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff8009071010, 0x:ffffff8009cf2000,
  401. irq_no:121
  402. [ 1.415592] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  403. [ 1.425814] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 3
  404. [ 1.435806] sunxi-ehci 5310000.ehci2-controller: irq 289, io mem 0x52e7363b
  405. [ 1.456003] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00
  406. [ 1.464985] hub 3-0:1.0: USB hub found
  407. [ 1.469277] hub 3-0:1.0: 1 port detected
  408. [ 1.474454] get drv_vbus is fail, 84
  409. [ 1.478499] get ehci3-controller, regulator_io is no nocare
  410. [ 1.485094] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff8009071358, 0x:ffffff8009cfc000,
  411. irq_no:123
  412. [ 1.498857] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  413. [ 1.509077] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 4
  414. [ 1.519048] sunxi-ehci 5311000.ehci3-controller: irq 291, io mem 0x57e0070c
  415. [ 1.539338] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00
  416. [ 1.548261] hub 4-0:1.0: USB hub found
  417. [ 1.552547] hub 4-0:1.0: 1 port detected
  418. [ 1.558058] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  419. [ 1.565423] get drv_vbus is fail, 84
  420. [ 1.569471] get ohci0-controller, regulator_io is no nocare
  421. [ 1.576882] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800906fc60
  422. [ 1.587414] sunxi-ohci 5101000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  423. [ 1.597243] sunxi-ohci 5101000.ohci0-controller: new USB bus registered, assigned bus number 5
  424. [ 1.607021] sunxi-ohci 5101000.ohci0-controller: irq 286, io mem 0x5d4c27e3
  425. [ 1.674367] hub 5-0:1.0: USB hub found
  426. [ 1.678655] hub 5-0:1.0: 1 port detected
  427. [ 1.683835] get ohci1-controller, regulator_io is no nocare
  428. [ 1.690402] hci: request ohci1-controller gpio:232
  429. [ 1.695919] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800906ffa8
  430. [ 1.706448] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  431. [ 1.716273] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 6
  432. [ 1.726067] sunxi-ohci 5200000.ohci1-controller: irq 288, io mem 0x645a97f7
  433. [ 1.794368] hub 6-0:1.0: USB hub found
  434. [ 1.798655] hub 6-0:1.0: 1 port detected
  435. [ 1.803800] get drv_vbus is fail, 84
  436. [ 1.807842] get ohci2-controller, regulator_io is no nocare
  437. [ 1.814524] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff80090702f0
  438. [ 1.825053] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  439. [ 1.834882] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 7
  440. [ 1.844664] sunxi-ohci 5310000.ohci2-controller: irq 290, io mem 0x6b81713a
  441. [ 1.914389] hub 7-0:1.0: USB hub found
  442. [ 1.918676] hub 7-0:1.0: 1 port detected
  443. [ 1.923840] get drv_vbus is fail, 84
  444. [ 1.927885] get ohci3-controller, regulator_io is no nocare
  445. [ 1.934576] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff8009070638
  446. [ 1.945105] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  447. [ 1.954933] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 8
  448. [ 1.964719] sunxi-ohci 5311000.ohci3-controller: irq 292, io mem 0x72a909bc
  449. [ 2.034362] hub 8-0:1.0: USB hub found
  450. [ 2.038649] hub 8-0:1.0: 1 port detected
  451. [ 2.044292] usbcore: registered new interface driver uas
  452. [ 2.050533] usbcore: registered new interface driver usb-storage
  453. [ 2.057422] usbcore: registered new interface driver ums-alauda
  454. [ 2.064186] usbcore: registered new interface driver ums-cypress
  455. [ 2.071055] usbcore: registered new interface driver ums-datafab
  456. [ 2.077910] usbcore: registered new interface driver ums_eneub6250
  457. [ 2.084965] usbcore: registered new interface driver ums-freecom
  458. [ 2.091825] usbcore: registered new interface driver ums-isd200
  459. [ 2.098589] usbcore: registered new interface driver ums-jumpshot
  460. [ 2.105546] usbcore: registered new interface driver ums-karma
  461. [ 2.112220] usbcore: registered new interface driver ums-onetouch
  462. [ 2.119200] usbcore: registered new interface driver ums-realtek
  463. [ 2.126074] usbcore: registered new interface driver ums-sddr09
  464. [ 2.132843] usbcore: registered new interface driver ums-sddr55
  465. [ 2.139609] usbcore: registered new interface driver ums-usbat
  466. [ 2.146485] usb_serial_number:20080411
  467. [ 2.152111] input: sunxi-keyboard as /devices/virtual/input/input0
  468. [ 2.159822] usbcore: registered new interface driver xpad
  469. [ 2.166069] usbcore: registered new interface driver usb_acecad
  470. [ 2.172862] usbcore: registered new interface driver aiptek
  471. [ 2.179248] usbcore: registered new interface driver gtco
  472. [ 2.185441] usbcore: registered new interface driver hanwang
  473. [ 2.191919] usbcore: registered new interface driver kbtab
  474. [ 2.198609] axp2101_pek: axp2101-pek can not register without irq
  475. [ 2.205503] axp2101-pek: probe of axp2101-pek.0 failed with error -22
  476. [ 2.214383] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0
  477. [ 2.221355] sunxi-rtc rtc: RTC enabled
  478. [ 2.225606] sunxi_rtc_probe: bootup extend state 1
  479. [ 2.231598] i2c /dev entries driver
  480. [ 2.236336] IR NEC protocol handler initialized
  481. [ 2.241461] IR RC5(x/sz) protocol handler initialized
  482. [ 2.247761] sunxi_ir_startup: get ir protocol failed
  483. [ 2.253261] 7040000.s_cir supply ir0 not found, using dummy regulator
  484. [ 2.260984] Registered IR keymap rc_map_sunxi
  485. [ 2.266340] input: sunxi-ir as /devices/platform/soc/7040000.s_cir/rc/rc0/input1
  486. [ 2.274947] rc rc0: sunxi-ir as /devices/platform/soc/7040000.s_cir/rc/rc0
  487. [ 2.283702] sunxi cedar version 0.1
  488. [ 2.287810] VE: install start!!!
  489. [ 2.287810]
  490. [ 2.293348] cedar_ve: cedar-ve the get irq is 278
  491. [ 2.299148] VE: get debugfs_mpp_root is NULL, please check mpp
  492. [ 2.299148]
  493. [ 2.307403] VE: sunxi ve debug register driver failed!
  494. [ 2.307403]
  495. [ 2.316889] device-mapper: uevent: version 1.0.3
  496. [ 2.322712] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  497. [ 2.332422] Bluetooth: HCI UART driver ver 2.3
  498. [ 2.337447] Bluetooth: HCI UART protocol H4 registered
  499. [ 2.343245] Bluetooth: HCI UART protocol LL registered
  500. [ 2.349038] Bluetooth: HCI UART protocol Three-wire (H5) registered
  501. [ 2.360501] sunxi-mmc sdc2: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29)
  502. [ 2.369545] sunxi-mmc sdc2: ***ctl-spec-caps*** 8
  503. [ 2.375045] sunxi-mmc sdc2: No vmmc regulator found
  504. [ 2.380545] sunxi-mmc sdc2: No vqmmc regulator found
  505. [ 2.386147] sunxi-mmc sdc2: No vdmmc regulator found
  506. [ 2.391742] sunxi-mmc sdc2: No vd33sw regulator found
  507. [ 2.397437] sunxi-mmc sdc2: No vd18sw regulator found
  508. [ 2.403131] sunxi-mmc sdc2: No vq33sw regulator found
  509. [ 2.408827] sunxi-mmc sdc2: No vq18sw regulator found
  510. [ 2.415280] sunxi-mmc sdc2: set host busy
  511. [ 2.419916] mmc:failed to get gpios
  512. [ 2.424150] sunxi-mmc sdc2: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  513. [ 2.449339] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  514. [ 2.476016] sunxi-mmc sdc2: detmode:alway in(non removable)
  515. [ 2.476044] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  516. [ 2.484424] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  517. [ 2.485492] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  518. [ 2.496341] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  519. [ 2.496408] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  520. [ 2.509253] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  521. [ 2.553848] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag
  522. [ 2.563100] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag
  523. [ 2.572320] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  524. [ 2.583221] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0
  525. [ 2.592564] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag
  526. [ 2.601783] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0
  527. [ 2.611124] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag
  528. [ 2.620767] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29)
  529. [ 2.629829] sunxi-mmc sdc0: ***ctl-spec-caps*** 8
  530. [ 2.635144] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 8 timing LEGACY(SDR12) dt B
  531. [ 2.646313] sunxi-mmc sdc0: No vmmc regulator found
  532. [ 2.651825] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS200 dt B
  533. [ 2.662314] sunxi-mmc sdc2: sdc set ios:clk 100000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS200 dt B
  534. [ 2.673192] sunxi-mmc sdc2: sdc set ios:clk 100000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS(SDR20) dt B
  535. [ 2.673323] sunxi-mmc sdc2: sdc set ios:clk 52000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS(SDR20) dt B
  536. [ 2.695615] sunxi-mmc sdc0: No vqmmc regulator found
  537. [ 2.701226] sunxi-mmc sdc0: No vdmmc regulator found
  538. [ 2.706828] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS400 dt B
  539. [ 2.706971] sunxi-mmc sdc2: sdc set ios:clk 100000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS400 dt B
  540. [ 2.728367] sunxi-mmc sdc0: No vd33sw regulator found
  541. [ 2.734634] sunxi-mmc sdc0: No vd18sw regulator found
  542. [ 2.740355] sunxi-mmc sdc0: No vq33sw regulator found
  543. [ 2.740547] mmc0: new HS400 MMC card at address 0001
  544. [ 2.741602] mmcblk0: mmc0:0001 DG4008 7.28 GiB
  545. [ 2.742047] mmcblk0boot0: mmc0:0001 DG4008 partition 1 4.00 MiB
  546. [ 2.742382] mmcblk0boot1: mmc0:0001 DG4008 partition 2 4.00 MiB
  547. [ 2.742673] mmcblk0rpmb: mmc0:0001 DG4008 partition 3 4.00 MiB
  548. [ 2.745177] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
  549. [ 2.785030] sunxi-mmc sdc0: No vq18sw regulator found
  550. [ 2.791598] sunxi-mmc sdc0: set host busy
  551. [ 2.796264] sunxi-mmc sdc0: Got CD GPIO
  552. [ 2.801037] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  553. [ 2.811378] sunxi-mmc sdc0: no vqmmc,Check if there is regulator
  554. [ 2.832731] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  555. [ 2.859773] sunxi-mmc sdc0: detmode:gpio irq
  556. [ 2.859811] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  557. [ 2.876695] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29)
  558. [ 2.885703] sunxi-mmc sdc1: ***ctl-spec-caps*** 8
  559. [ 2.891153] sunxi-mmc sdc1: No vmmc regulator found
  560. [ 2.896651] sunxi-mmc sdc1: No vqmmc regulator found
  561. [ 2.902245] sunxi-mmc sdc1: No vdmmc regulator found
  562. [ 2.907839] sunxi-mmc sdc1: No vd33sw regulator found
  563. [ 2.913532] sunxi-mmc sdc1: No vd18sw regulator found
  564. [ 2.919223] sunxi-mmc sdc1: No vq33sw regulator found
  565. [ 2.924915] sunxi-mmc sdc1: No vq18sw regulator found
  566. [ 2.931470] sunxi-mmc sdc1: set host busy
  567. [ 2.936109] mmc:failed to get gpios
  568. [ 2.940353] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  569. [ 2.966070] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  570. [ 2.992742] sunxi-mmc sdc1: detmode:manually by software
  571. [ 2.993621] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
  572. [ 2.999619] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
  573. [ 3.004774] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  574. [ 3.012863] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  575. [ 3.014768] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  576. [ 3.025549] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  577. [ 3.036327] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  578. [ 3.042217] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  579. [ 3.047274] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  580. [ 3.071350] hidraw: raw HID events driver (C) Jiri Kosina
  581. [ 3.082275] usbcore: registered new interface driver usbhid
  582. [ 3.088590] usbhid: USB HID core driver
  583. [ 3.093362] ashmem: initialized
  584. [ 3.099170] optee: probing for conduit method from DT.
  585. [ 3.104995] optee: api uid mismatch
  586. [ 3.108939] FD650: fd650_driver_init: FD650 Driver init.
  587. [ 3.115862] FD650: NOTE: register_fd650_driver:::register fd650 driver success
  588. [ 3.127882] usbcore: registered new interface driver snd-usb-audio
  589. [ 3.136672] [sunxi_hdmi_codec_init] driver and deivce register finished.
  590. [ 3.145088] failed get gpio-spdif gpio from dts,spdif_gpio:-2
  591. [ 3.153725] [sunxi_internal_codec_probe]:get audio avcc failed
  592. [ 3.160402] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed
  593. [ 3.168031] sunxi-internal-codec codec: pa_msleep_time get failed
  594. [ 3.174913] [audio-codec]dachpf_cfg configurations missing or invalid.
  595. [ 3.182278] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:160, pa_ctl_level:0, gpio-spk:0
  596. [ 3.204346] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok
  597. [ 3.214867] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered
  598. [ 3.221677] sndhdmi sndhdmi: snd_soc_register_card() failed: -517
  599. [ 3.232017] sndspdif sndspdif: spdif-hifi <-> spdif mapping ok
  600. [ 3.242128] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid
  601. [ 3.250517] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22
  602. [ 3.260365] sun50iw9p1-pinctrl pio: expect_func as:h_pcm0, but muxsel(4) is func:h_i2s0
  603. [ 3.269422] sun50iw9p1-pinctrl pio: expect_func as:h_pcm0, but muxsel(4) is func:h_i2s0
  604. [ 3.278462] sun50iw9p1-pinctrl pio: expect_func as:h_pcm0, but muxsel(4) is func:h_i2s0
  605. [ 3.287495] sun50iw9p1-pinctrl pio: expect_func as:h_pcm0, but muxsel(4) is func:h_i2s0
  606. [ 3.296524] sun50iw9p1-pinctrl pio: expect_func as:h_pcm0, but muxsel(4) is func:h_i2s0
  607. [ 3.309695] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok
  608. [ 3.320607] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok
  609. [ 3.330967] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok
  610. [ 3.343757] pktgen: Packet Generator for packet performance testing. Version: 2.75
  611. [ 3.352798] u32 classifier
  612. [ 3.355846] Actions configured
  613. [ 3.359697] Netfilter messages via NETLINK v0.30.
  614. [ 3.365067] nfnl_acct: registering with nfnetlink.
  615. [ 3.370890] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  616. [ 3.378032] ctnetlink v0.93: registering with nfnetlink.
  617. [ 3.384684] xt_time: kernel timezone is -0000
  618. [ 3.389751] ipip: IPv4 and MPLS over IPv4 tunneling driver
  619. [ 3.396707] gre: GRE over IPv4 demultiplexor driver
  620. [ 3.402218] ip_gre: GRE over IPv4 tunneling driver
  621. [ 3.409006] IPv4 over IPsec tunneling driver
  622. [ 3.414758] ip_tables: (C) 2000-2006 Netfilter Core Team
  623. [ 3.421062] arp_tables: arp_tables: (C) 2002 David S. Miller
  624. [ 3.427521] Initializing XFRM netlink socket
  625. [ 3.432372] IPsec XFRM device driver
  626. [ 3.437283] NET: Registered protocol family 10
  627. [ 3.444468] mip6: Mobile IPv6
  628. [ 3.447872] ip6_tables: (C) 2000-2006 Netfilter Core Team
  629. [ 3.455350] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  630. [ 3.463857] NET: Registered protocol family 17
  631. [ 3.468931] NET: Registered protocol family 15
  632. [ 3.473991] l2tp_core: L2TP core driver, V2.0
  633. [ 3.478917] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  634. [ 3.484900] Registered cp15_barrier emulation handler
  635. [ 3.490607] Registered setend emulation handler
  636. [ 3.496862] registered taskstats version 1
  637. [ 3.502301] HDMI 2.0 driver init start!
  638. [ 3.506651] boot_hdmi=true
  639. [ 3.510429] Can not find the node of esm
  640. [ 3.514912] ERROR: pinctrl_get for HDMI2.0 DDC fail
  641. [ 3.520541] Get hdmi_power0:vcc-hdmi
  642. [ 3.524611] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator
  643. [ 3.532461] Get hdmi_power1:vdd-hdmi
  644. [ 3.536517] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator
  645. [ 3.545879] hdmi_cec_init
  646. [ 3.549508] [DISP] disp_device_attached,line:147:[ 3.553047] HDMI2.0 module init end
  647. [ 3.553698] tv_probe()1429 - of_property_read_string tv_power failed!
  648. [ 3.554755] tv_probe()1429 - of_property_read_string tv_power failed!
  649. [ 3.554779] tv: probe of tv failed with error -22
  650.  
  651. [ 3.578458] attached ok, mgr0<-->device0, type=4
  652. [ 3.583870] [HDMI receive params]: tv mode: 0xa format:0x1 data bits:0x0 eotf:0x4 cs:0x101 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8
  653. [ 3.597195] [DISP] disp_hdmi_set_mode,line:648:
  654. [ 3.602106] hdmi_set_mode is null!
  655. [ 3.687880] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated
  656. [ 3.699947] cpu cpu1: opp_list_debug_create_link: Failed to create link
  657. [ 3.707421] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12)
  658. [ 3.715067] cpu cpu2: opp_list_debug_create_link: Failed to create link
  659. [ 3.722546] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12)
  660. [ 3.730177] cpu cpu3: opp_list_debug_create_link: Failed to create link
  661. [ 3.737630] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12)
  662. [ 3.747547] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok
  663. [ 3.756615] get det_vbus is fail, 84
  664. [ 3.760654] get id is fail, 84
  665. [ 3.764742] sunxi-rtc rtc: setting system clock to 1970-01-01 00:00:06 UTC (6)
  666. [ 3.773600] snddaudio snddaudio0: codec: snd-soc-dummy, codec_dai: snd-soc-dummy-dai.
  667. [ 3.782739] snddaudio snddaudio0: snd-soc-dummy-dai <-> ahub_daudio0 mapping ok
  668. [ 3.792943] axp806-dcdcb: disabling
  669. [ 3.800704] ALSA device list:
  670. [ 3.804058] #0: audiocodec
  671. [ 3.807291] #1: sndspdif
  672. [ 3.810347] #2: sndahub
  673. [ 3.813279] #3: sndhdmi
  674. [ 3.816212] #4: snddaudio0
  675. [ 3.820819] Freeing unused kernel memory: 2560K
  676. [ 3.830429] init: init first stage started!
  677. [ 3.836176] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
  678. [ 3.845780] init: Using Android DT directory /proc/device-tree/firmware/android/
  679. [ 3.881991] init: [libfs_mgr]Created logical partition system on device /dev/block/dm-0
  680. [ 3.893121] init: [libfs_mgr]Created logical partition vendor on device /dev/block/dm-1
  681. [ 3.904175] init: [libfs_mgr]Created logical partition product on device /dev/block/dm-2
  682. [ 3.915328] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/by-name/metadata
  683. [ 3.924690] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
  684. [ 3.939640] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory
  685. [ 3.952041] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk0p11 (executable not in system image)
  686. [ 3.968486] EXT4-fs (mmcblk0p11): recovery complete
  687. [ 3.974028] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: errors=panic
  688. [ 3.989602] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1
  689. [ 4.007746] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1
  690. [ 4.020547] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1
  691. [ 4.044725] init: 12 output lines suppressed due to ratelimiting
  692. [ 4.056452] random: init: uninitialized urandom read (40 bytes read)
  693. [ 4.173563] random: init: uninitialized urandom read (40 bytes read)
  694. [ 4.192857] init: Loading SELinux policy
  695. [ 4.210958] SELinux: 8192 avtab hash slots, 22626 rules.
  696. [ 4.231271] SELinux: 8192 avtab hash slots, 22626 rules.
  697. [ 4.237280] SELinux: 1 users, 4 roles, 1398 types, 0 bools, 1 sens, 1024 cats
  698. [ 4.245392] SELinux: 97 classes, 22626 rules
  699. [ 4.254176] SELinux: Completing initialization.
  700. [ 4.259381] SELinux: Setting up existing superblocks.
  701. [ 4.309671] audit: type=1403 audit(7.043:2): policy loaded auid=4294967295 ses=4294967295
  702. [ 4.319111] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
  703. [ 4.319111]
  704. [ 4.338108] selinux: SELinux: Skipping /product/etc/selinux/product_file_contexts: empty file
  705. [ 4.338108]
  706. [ 4.349925] selinux: SELinux: Loaded file_contexts
  707. [ 4.349925]
  708. [ 4.363187] random: init: uninitialized urandom read (40 bytes read)
  709. [ 4.415234] init: init second stage started!
  710. [ 4.458503] init: Using Android DT directory /proc/device-tree/firmware/android/
  711. [ 4.473537] selinux: SELinux: Skipping /product/etc/selinux/product_file_contexts: empty file
  712. [ 4.473537]
  713. [ 4.485308] selinux: SELinux: Loaded file_contexts
  714. [ 4.485308]
  715. [ 4.492415] init: Running restorecon...
  716. [ 4.520969] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
  717. [ 4.520969]
  718. [ 4.539077] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:shell_prop:s0 tclass=property_service permissive=1
  719. [ 4.539077]
  720. [ 4.559367] init: Couldn't load property file '/product_services/build.prop': open() failed: No such file or directory: No such file or directory
  721. [ 4.574104] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
  722. [ 4.589631] init: Setting product property ro.product.brand to 'Amlogic' (from ro.product.product.brand)
  723. [ 4.803328] ueventd: ueventd started!
  724. [ 4.812334] selinux: SELinux: Skipping /product/etc/selinux/product_file_contexts: empty file
  725. [ 4.812334]
  726. [ 4.819742] apexd: Bootstrap subcommand detected
  727. [ 4.829411] selinux: SELinux: Loaded file_contexts
  728. [ 4.829411]
  729. [ 4.831791] apexd: Scanning /system/apex for embedded keys
  730. [ 4.833661] apexd: Scanning /product/apex for embedded keys
  731. [ 4.833814] apexd: ... does not exist. Skipping
  732. [ 4.833965] apexd: Scanning /system/apex looking for APEX packages.
  733. [ 4.834278] apexd: Found /system/apex/com.android.conscrypt
  734. [ 4.834698] apexd: Skipped when bootstrapping
  735. [ 4.834848] apexd: Found /system/apex/com.android.runtime.debug
  736. [ 4.835678] apexd: Successfully bind-mounted flattened package /system/apex/com.android.runtime.debug on /apex/com.android.runtime@1
  737. [ 4.836073] apexd: Found /system/apex/com.android.media
  738. [ 4.841462] apexd: 9 output lines suppressed due to ratelimiting
  739. [ 4.905079] ueventd: Parsing file /ueventd.rc...
  740. [ 4.912708] ueventd: Parsing file /vendor/ueventd.rc...
  741. [ 4.919809] ueventd: Parsing file /odm/ueventd.rc...
  742. [ 4.925497] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
  743. [ 4.936528] ueventd: Parsing file /ueventd.sun50iw9p1.rc...
  744. [ 4.942902] ueventd: Unable to read config file '/ueventd.sun50iw9p1.rc': open() failed: No such file or directory
  745. [ 5.381059] ueventd: Coldboot took 0.424 seconds
  746. [ 5.470261] Registered swp emulation handler
  747. [ 5.529548] init: wait for '/dev/block/by-name/media_data' took 0ms
  748. [ 5.544058] FAT-fs (mmcblk0p15): bogus number of reserved sectors
  749. [ 5.551077] FAT-fs (mmcblk0p15): Can't find a valid FAT filesystem
  750. [ 5.579429] EXT4-fs (mmcblk0p17): Ignoring removed nomblk_io_submit option
  751. [ 5.599083] logd.auditd: start
  752. [ 5.602808] logd.klogd: 5506795715
  753. [ 5.624201] EXT4-fs (mmcblk0p17): recovery complete
  754. [ 5.630914] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  755. [ 6.511075] e2fsck: e2fsck 1.44.4 (18-Aug-2018)
  756. [ 6.511075]
  757. [ 6.517890] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  758. [ 6.517890]
  759. [ 6.526119] e2fsck: Pass 2: Checking directory structure
  760. [ 6.526119]
  761. [ 6.533755] e2fsck: Pass 3: Checking directory connectivity
  762. [ 6.533755]
  763. [ 6.541671] e2fsck: Pass 4: Checking reference counts
  764. [ 6.541671]
  765. [ 6.549047] e2fsck: Pass 5: Checking group summary information
  766. [ 6.549047]
  767. [ 6.557344] e2fsck: /dev/block/by-name/UDISK: 14848/262144 files (0.9% non-contiguous), 264196/1048011 blocks
  768. [ 6.557344]
  769. [ 6.576958] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: discard
  770. [ 6.588753] EXT4-fs (mmcblk0p7): Ignoring removed nomblk_io_submit option
  771. [ 6.599117] EXT4-fs (mmcblk0p7): recovery complete
  772. [ 6.604529] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  773. [ 6.715251] e2fsck: e2fsck 1.44.4 (18-Aug-2018)
  774. [ 6.715251]
  775. [ 6.722082] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  776. [ 6.722082]
  777. [ 6.730298] e2fsck: Pass 2: Checking directory structure
  778. [ 6.730298]
  779. [ 6.739999] EXT4-fs (mmcblk0p7): Ignoring removed nomblk_io_submit option
  780. [ 6.751176] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  781. [ 6.786934] init: 4 output lines suppressed due to ratelimiting
  782. [ 6.801645] zram0: detected capacity change from 0 to 1556148224
  783. [ 6.838683] mkswap: Swapspace size: 1519672k, UUID=e60108ea-3551-4377-b7dc-f2fe4fcddfec
  784. [ 6.848716] Adding 1519672k swap on /dev/block/zram0. Priority:-1 extents:1 across:1519672k SS
  785. console:/ $ [ 6.899402] hdmi_hpd_sys_config_release
  786. [ 7.118663] mali_kbase: loading out-of-tree module taints kernel.
  787. [ 7.144305] mali gpu: Regulators probed: 0
  788. [ 7.148983] mali gpu: Clocks probed: 2
  789. [ 7.154192] mali gpu: [950mv-600MHz] bak[950mv-600MHz] inde_power:0 idle:1 dvfs:0
  790. [ 7.162776] mali gpu: GPU identified as 0x3 arch 7.0.9 r0p0 status 0
  791. [ 7.170183] mali gpu: No memory group manager is configured
  792. [ 7.177223] mali gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
  793. [ 7.190463] mali gpu: Probed as mali0
  794. [ 7.232413] usbcore: registered new interface driver uvcvideo
  795. [ 7.238918] USB Video Class driver (1.1.1)
  796. [ 7.432534] apexd: Marking APEXd as starting
  797. [ 7.438830] apexd: Scanning /system/apex for embedded keys
  798. [ 7.448038] apexd: Scanning /product/apex for embedded keys
  799. [ 7.454490] apexd: ... does not exist. Skipping
  800. [ 7.459768] apexd: Populating APEX database from mounts...
  801. [ 7.466585] apexd: Failed to walk /product/apex : Can't open /product/apex for reading : No such file or directory
  802. [ 7.479166] apexd: Found "/apex/com.android.runtime@1"
  803. [ 7.485268] apexd: Found "/apex/com.android.tzdata@290000000"
  804. [ 7.492012] apexd: 2 packages restored.
  805. [ 7.496592] apexd: Scanning /data/apex/sessions looking for sessions to be activated.
  806. [ 7.548258] vdc: Waited 0ms for vold
  807. [ 7.639145] type=1400 audit(10.370:3): avc: denied { setattr } for comm="init" name="audio_d" dev="mmcblk0p17" ino=155650 scontext=u:r:vendor_init:s0 tcontext=u:object_r:audio_rw_data_file:s0 tclass=dir permissive=1
  808. [ 7.837126] logd.daemon: reinit
  809. [ 8.384615] type=1400 audit(10.370:3): avc: denied { setattr } for comm="init" name="audio_d" dev="mmcblk0p17" ino=155650 scontext=u:r:vendor_init:s0 tcontext=u:object_r:audio_rw_data_file:s0 tclass=dir permissive=1
  810. [ 8.428668] healthd: No battery devices found
  811. [ 8.450964] file system registered
  812. [ 8.462868] healthd: battery none chg=
  813. [ 8.539135] sunxi-bt soc@03000000:bt: block state already is 1
  814. [ 8.579107] type=1400 audit(11.113:4): avc: denied { execute_no_trans } for comm="init" path="/system/bin/onstartup.sh" dev="dm-0" ino=765 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
  815. [ 8.616169] FAT-fs (mmcblk0p16): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  816. [ 8.767755] logd: logdr: UID=1036 GID=1023 PID=1811 b tail=0 logMask=10 pid=0 start=0ns timeout=0ns
  817. [ 8.999028] read descriptors
  818. [ 8.999045] read strings
  819. [ 9.436616] type=1400 audit(11.113:4): avc: denied { execute_no_trans } for comm="init" path="/system/bin/onstartup.sh" dev="dm-0" ino=765 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
  820. [ 9.436661] type=1400 audit(11.626:5): avc: denied { write } for comm="setprop" name="property_service" dev="tmpfs" ino=4610
  821. scontext=u:r:toolbox:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
  822. [ 9.437128] type=1400 audit(11.626:5): avc: denied { write } for comm="setprop" name="property_service" dev="tmpfs" ino=4610
  823. scontext=u:r:toolbox:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
  824. [ 9.449923] init: starting service 'media.swcodec'...
  825. [ 9.475126] init: Command 'class_start main' action=nonencrypted (/init.rc:761) took 824ms and succeeded
  826. [ 9.476225] selinux: avc: denied { set } for property=service.bootanim.delay pid=1806 uid=0 gid=0 scontext=u:r:toolbox:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=1
  827. [ 9.476225]
  828. [ 9.498176] init: starting service 'gatekeeperd'...
  829. [ 9.542250] init: starting service 'tombstoned'...
  830. [ 9.591086] init: starting service 'usbd'...
  831. [ 9.594074] init: Created socket '/dev/socket/tombstoned_crash', mode 666, user 1000, group 1000
  832. [ 9.609907] init: Created socket '/dev/socket/tombstoned_intercept', mode 666, user 1000, group 1000
  833. [ 9.611757] init: Created socket '/dev/socket/tombstoned_java_trace', mode 666, user 1000, group 1000
  834. [ 9.635267] init: Command 'class_start late_start' action=nonencrypted (/init.rc:762) took 143ms and succeeded
  835. [ 10.349942] Do not support any basic 3d video format
  836. [ 10.349947] Do not support any basic 3d video format
  837. [ 10.349951] Do not support any basic 3d video format
  838. [ 12.199696] type=1400 audit(12.473:14): avc: denied { connectto } for comm="setprop" path="/dev/socket/property_service" scontext=u:r:toolbox:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket permissive=1
  839. [ 12.199760] type=1400 audit(14.926:15): avc: denied { read } for comm="app_process" name="u:object_r:device_config_runtime_native_boot_prop:s0" dev="tmpfs" ino=4521 scontext=u:r:shell:s0 tcontext=u:object_r:device_config_runtime_native_boot_prop:s0 tclass=file permissive=1
  840. [ 12.200256] type=1400 audit(14.926:15): avc: denied { read } for comm="app_process" name="u:object_r:device_config_runtime_native_boot_prop:s0" dev="tmpfs" ino=4521 scontext=u:r:shell:s0 tcontext=u:object_r:device_config_runtime_native_boot_prop:s0 tclass=file permissive=1
  841. [ 12.200304] type=1400 audit(14.926:16): avc: denied { open } for comm="app_process" path="/dev/__properties__/u:object_r:device_config_runtime_native_boot_prop:s0" dev="tmpfs" ino=4521 scontext=u:r:shell:s0 tcontext=u:object_r:device_config_runtime_native_boot_prop:s0 tclass=file permissive=1
  842. [ 12.200599] type=1400 audit(14.926:16): avc: denied { open } for comm="app_process" path="/dev/__properties__/u:object_r:device_config_runtime_native_boot_prop:s0" dev="tmpfs" ino=4521 scontext=u:r:shell:s0 tcontext=u:object_r:device_config_runtime_native_boot_prop:s0 tclass=file permissive=1
  843. [ 12.200647] type=1400 audit(14.926:17): avc: denied { getattr } for comm="app_process" path="/dev/__properties__/u:object_r:device_config_runtime_native_boot_prop:s0" dev="tmpfs" ino=4521 scontext=u:r:shell:s0 tcontext=u:object_r:device_config_runtime_native_boot_prop:s0 tclass=file permissive=1
  844. [ 12.296075] input: sunxi-ir-uinput as /devices/virtual/input/input2
  845. [ 12.552030] random: crng init done
  846. [ 12.552037] random: 7 urandom warning(s) missed due to ratelimiting
  847. [ 13.699040] logd: logdr: UID=1036 GID=1023 PID=1813 b tail=0 logMask=2 pid=0 start=0ns timeout=0ns
  848. [ 13.719158] logd: logdr: UID=1036 GID=1023 PID=1812 b tail=0 logMask=4 pid=0 start=12216001000ns timeout=0ns
  849. [ 13.731826] logd: logdr: UID=1036 GID=1023 PID=1809 b tail=0 logMask=8 pid=0 start=14541815000ns timeout=0ns
  850. [ 14.415606] logd: logdr: UID=1036 GID=1023 PID=1810 b tail=0 logMask=1 pid=0 start=15616170000ns timeout=0ns
  851. [ 17.384650] healthd: battery none chg=
  852. [ 18.064642] healthd: battery none chg=
  853. [ 18.070253] healthd: battery none chg=
  854. [ 18.681769] type=1400 audit(14.926:17): avc: denied { getattr } for comm="app_process" path="/dev/__properties__/u:object_r:device_config_runtime_native_boot_prop:s0" dev="tmpfs" ino=4521 scontext=u:r:shell:s0 tcontext=u:object_r:device_config_runtime_native_boot_prop:s0 tclass=file permissive=1
  855. [ 18.747018] type=1400 audit(1596094217.286:18): avc: denied { relabelto } for comm="Binder:1842_1" name="lib" dev="mmcblk0p17" ino=131347 scontext=u:r:installd:s0 tcontext=u:object_r:system_data_file:s0 tclass=lnk_file permissive=1
  856. [ 18.781129] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/init.rc:806)
  857. [ 20.084953] acc_open
  858. [ 20.087641] acc_release
  859. [ 20.570826] init: Received control message 'interface_start' for 'android.hardware.wifi@1.0::IWifi/default' from pid: 1635 (/system/bin/hwservicemanager)
  860. [ 20.593401] init: starting service 'vendor.wifi_hal_legacy'...
  861. [ 20.604388] init: Received control message 'interface_start' for 'android.hardware.wifi@1.0::IWifi/default' from pid: 1635 (/system/bin/hwservicemanager)
  862. [ 20.861114] libphy: gmac1: probed
  863. [ 20.933257] sunxi-gmac gmac1 eth0: eth0: Type(6) PHY ID 00441400 at 0 IRQ poll (gmac1-0:00)
  864. [ 20.955166] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  865. [ 21.540651] ======== XRADIO WIFI OPEN ========
  866. [ 21.554204] [XRADIO] Driver Label:XR_V02.15.73 Jun 17 2020 14:57:45
  867. [ 21.564456] [XRADIO] Allocated hw_priv @ ffffffc0495c97a0
  868. [ 21.584145] sunxi-wlan soc@03000000:wlan: bus_index: 1
  869. [ 21.655014] type=1400 audit(1596094217.286:18): avc: denied { relabelto } for comm="Binder:1842_1" name="lib" dev="mmcblk0p17" ino=131347 scontext=u:r:installd:s0 tcontext=u:object_r:system_data_file:s0 tclass=lnk_file permissive=1
  870. [ 21.684952] type=1400 audit(1596094220.260:19): avc: denied { getattr } for comm="webview_zygote" path="/data/data/com.android.webview" dev="mmcblk0p17" ino=131300 scontext=u:r:webview_zygote:s0 tcontext=u:object_r:app_data_file:s0:c61,c256,c512,c768 tclass=dir permissive=1
  871. [ 21.782897] [XRADIO] Detect SDIO card 1
  872. [ 21.782947] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  873. [ 21.799427] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  874. [ 21.816874] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  875. [ 21.819714] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  876. [ 21.835453] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
  877. [ 21.835594] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
  878. [ 21.837307] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
  879. [ 21.840156] mmc2: new high speed SDIO card at address 0001
  880. [ 21.867165] binder: undelivered transaction 8316, process died.
  881. [ 21.868588] init: Service 'vendor.light-hal-2-0' (pid 2091) exited with status 0
  882. [ 21.905876] [SBUS] XRadio Device:sdio clk=50000000
  883. [ 21.918336] [XRADIO] XRADIO_HW_REV 1.0 detected.
  884. [ 22.071997] [XRADIO] Bootloader complete
  885. [ 22.173302] [XRADIO] Firmware completed.
  886. [ 22.179835] [WSM] Firmware Label:XR_C01.08.52.65 Jul 16 2019 11:09:57
  887. [ 22.190100] [XRADIO] Firmware Startup Done.
  888. [ 22.240884] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  889. [ 22.335558] init: Received control message 'interface_start' for 'android.hardware.wifi.supplicant@1.0::ISupplicant/default'
  890. from pid: 1635 (/system/bin/hwservicemanager)
  891. [ 22.356143] init: starting service 'wpa_supplicant'...
  892. [ 22.368995] init: Created socket '/dev/socket/wpa_wlan0', mode 660, user 1010, group 1010
  893. [ 22.544532] capability: warning: `wpa_supplicant' uses 32-bit capabilities (legacy support in use)
  894. [ 22.553587] type=1400 audit(1596094220.260:19): avc: denied { getattr } for comm="webview_zygote" path="/data/data/com.android.webview" dev="mmcblk0p17" ino=131300 scontext=u:r:webview_zygote:s0 tcontext=u:object_r:app_data_file:s0:c61,c256,c512,c768 tclass=dir permissive=1
  895. [ 22.553635] type=1400 audit(1596094221.150:20): avc: denied { read } for comm="HwBinder:1869_1" name="u:object_r:system_prop:s0" dev="tmpfs" ino=4587 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1
  896. [ 22.554865] type=1400 audit(1596094221.150:20): avc: denied { read } for comm="HwBinder:1869_1" name="u:object_r:system_prop:s0" dev="tmpfs" ino=4587 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1
  897. [ 22.554922] type=1400 audit(1596094221.150:21): avc: denied { open } for comm="HwBinder:1869_1" path="/dev/__properties__/u:object_r:system_prop:s0" dev="tmpfs" ino=4587 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1
  898. [ 22.555950] type=1400 audit(1596094221.150:21): avc: denied { open } for comm="HwBinder:1869_1" path="/dev/__properties__/u:object_r:system_prop:s0" dev="tmpfs" ino=4587 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1
  899. [ 22.556170] type=1400 audit(1596094221.150:22): avc: denied { getattr } for comm="HwBinder:1869_1" path="/dev/__properties__/u:object_r:system_prop:s0" dev="tmpfs" ino=4587 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1
  900. [ 22.788530] [STA] !!!xradio_vif_setup: id=0, type=2, p2p=0, addr=5c:9e:eb:b8:61:d9
  901. [ 22.813092] [AP_WRN] BSS_CHANGED_ASSOC but driver is unjoined.
  902. [ 22.837535] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  903. [ 22.857123] selinux: avc: denied { set } for property=vendor.wlan.firmware.version pid=2480 uid=1010 gid=1010 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_default_prop:s0 tclass=property_service permissive=1
  904. [ 22.857123]
  905. [ 23.100442] [STA] !!!xradio_vif_setup: id=2, type=10, p2p=0, addr=5c:9e:eb:b8:61:da
  906. [ 24.655647] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  907. [ 27.653667] init: Service 'bootanim' (pid 2069) exited with status 0
  908. [ 27.662917] init: processing action (init.svc.bootanim=stopped) from (/vendor/etc/init/hw/init.device.rc:52)
  909. [ 27.675322] init: starting service 'preinstall'...
  910. [ 27.684315] type=1400 audit(1596094221.150:22): avc: denied { getattr } for comm="HwBinder:1869_1" path="/dev/__properties__/u:object_r:system_prop:s0" dev="tmpfs" ino=4587 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1
  911. [ 27.710353] type=1400 audit(1596094226.290:23): avc: denied { execute_no_trans } for comm="init" path="/system/bin/preinstall.sh" dev="dm-0" ino=781 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
  912. [ 27.781952] type=1400 audit(1596094226.290:23): avc: denied { execute_no_trans } for comm="init" path="/system/bin/preinstall.sh" dev="dm-0" ino=781 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
  913. [ 27.805072] type=1400 audit(1596094226.386:24): avc: denied { call } for comm="cmd" scontext=u:r:init:s0 tcontext=u:r:system_server:s0 tclass=binder permissive=1
  914. [ 27.821909] type=1400 audit(1596094226.386:24): avc: denied { call } for comm="cmd" scontext=u:r:init:s0 tcontext=u:r:system_server:s0 tclass=binder permissive=1
  915. [ 27.838355] type=1400 audit(1596094226.386:25): avc: denied { transfer } for comm="cmd" scontext=u:r:init:s0 tcontext=u:r:system_server:s0 tclass=binder permissive=1
  916. [ 27.855718] type=1400 audit(1596094226.386:25): avc: denied { transfer } for comm="cmd" scontext=u:r:init:s0 tcontext=u:r:system_server:s0 tclass=binder permissive=1
  917. [ 27.873342] type=1400 audit(1596094226.390:26): avc: denied { call } for comm="Binder:1951_4" scontext=u:r:system_server:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
  918. [ 27.930389] init: processing action (sys.usb.config=none && sys.usb.configfs=1) from (/vendor/etc/init/hw/init.sun50iw9p1.usb.rc:64)
  919. [ 27.946680] sdcardfs version 2.0
  920. [ 27.950377] sdcardfs: dev_name -> /data/media
  921. [ 27.953619] init: processing action (sys.usb.config=none && sys.usb.configfs=1) from (/init.usb.configfs.rc:1)
  922. [ 27.958907] android_work: did not send uevent (0 0 (null))
  923. [ 27.961913] init: Sending signal 9 to service 'adbd' (pid 1808) process group...
  924. [ 27.963764] FD650: fd650_dev_open:::open fd650 dev success
  925. [ 27.964257] type=1400 audit(1596094226.390:26): avc: denied { call } for comm="Binder:1951_4" scontext=u:r:system_server:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
  926. [ 27.964295] type=1400 audit(1596094226.566:27): avc: denied { read write } for comm="panelsrv" name="fd650_dev" dev="tmpfs" ino=266 scontext=u:r:init:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  927. [ 28.033222] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,unshared_obb,mask=6,userid=0,gid=1015
  928. [ 28.046211] sdcardfs: mnt -> ffffffc04752a720
  929. [ 28.051227] sdcardfs: mounted on top of /data/media type ext4
  930. [ 28.059082] Remount options were mask=23,gid=9997 for vfsmnt ffffffc03e7fc1e0.
  931. [ 28.066522] libprocessgroup: Successfully killed process cgroup uid 0 pid 1808 in 104ms
  932. [ 28.067133] init: Command 'stop adbd' action=sys.usb.config=none && sys.usb.configfs=1 (/init.usb.configfs.rc:3) took 105ms and succeeded
  933. [ 28.073319] init: Service 'adbd' (pid 1808) received signal 9
  934. [ 28.091599] selinux: SELinux: Skipping restorecon on directory(/data/system_ce/0)
  935. [ 28.091599]
  936. [ 28.106954] sdcardfs : options - debug:1
  937. [ 28.111513] sdcardfs : options - gid:9997
  938. [ 28.116196] sdcardfs : options - mask:23
  939. [ 28.121339] Remount options were mask=7,gid=9997 for vfsmnt ffffffc03e7fd1a0.
  940. [ 28.129502] sdcardfs : options - debug:1
  941. [ 28.134007] sdcardfs : options - gid:9997
  942. [ 28.138554] sdcardfs : options - mask:7
  943. [ 28.143730] Remount options were mask=7,gid=9997 for vfsmnt ffffffc0759381e0.
  944. [ 28.151798] sdcardfs : options - debug:1
  945. [ 28.156392] sdcardfs : options - gid:9997
  946. [ 28.161182] sdcardfs : options - mask:7
  947. [ 28.323609] read descriptors
  948. [ 28.327004] read strings
  949. [ 31.680464] apexd: Can't open /product/apex for reading : No such file or directory
  950. [ 32.812600] init: Service 'appsdisable' (pid 3256) exited with status 0
  951. [ 33.194666] init: Received control message 'stop' for 'gsid' from pid: 1951 (system_server)
  952. [ 33.225464] init: Sending signal 9 to service 'gsid' (pid 3552) process group...
  953. [ 33.247889] libprocessgroup: Successfully killed process cgroup uid 0 pid 3552 in 12ms
  954. [ 33.276941] init: Service 'gsid' (pid 3552) received signal 9
  955.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!