API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 28th, 2018
175
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.13 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.4.116 (ador@myarch) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3843-5c18e86c94) ) #0 Sun Feb 25 18:03:07 2018
  2. [ 0.000000] Board has DDR2
  3. [ 0.000000] Analog PMU set to hw control
  4. [ 0.000000] Digital PMU set to hw control
  5. [ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
  6. [ 0.000000] bootconsole [early0] enabled
  7. [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
  8. [ 0.000000] MIPS: machine is Xiaomi Mi Router 3
  9. [ 0.000000] Determined physical RAM map:
  10. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  11. [ 0.000000] Initrd not found or empty - disabling initrd
  12. [ 0.000000] Zone ranges:
  13. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  14. [ 0.000000] Movable zone start for each node
  15. [ 0.000000] Early memory node ranges
  16. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  17. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  18. [ 0.000000] On node 0 totalpages: 32768
  19. [ 0.000000] free_area_init_node: node 0, pgdat 803f23b0, node_mem_map 81000000
  20. [ 0.000000] Normal zone: 256 pages used for memmap
  21. [ 0.000000] Normal zone: 0 pages reserved
  22. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  23. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  24. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  25. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  26. [ 0.000000] pcpu-alloc: [0] 0
  27. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  28. [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
  29. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  30. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  31. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  32. [ 0.000000] Writing ErrCtl register=00000000
  33. [ 0.000000] Readback ErrCtl register=00000000
  34. [ 0.000000] Memory: 125284K/131072K available (3229K kernel code, 139K rwdata, 776K rodata, 200K init, 206K bss, 5788K reserved, 0K cma-reserved)
  35. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  36. [ 0.000000] NR_IRQS:256
  37. [ 0.000000] CPU Clock: 580MHz
  38. [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
  39. [ 0.000000] systick: enable autosleep mode
  40. [ 0.000000] systick: running - mult: 214748, shift: 32
  41. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
  42. [ 0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
  43. [ 0.007570] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  44. [ 0.070067] pid_max: default: 32768 minimum: 301
  45. [ 0.074696] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  46. [ 0.081069] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  47. [ 0.094812] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  48. [ 0.104369] futex hash table entries: 256 (order: -1, 3072 bytes)
  49. [ 0.110438] pinctrl core: initialized pinctrl subsystem
  50. [ 0.116233] NET: Registered protocol family 16
  51. [ 0.383905] PCI host bridge /pcie@10140000 ranges:
  52. [ 0.388521] MEM 0x0000000020000000..0x000000002fffffff
  53. [ 0.393572] IO 0x0000000010160000..0x000000001016ffff
  54. [ 0.407096] rt2880_gpio 10000600.gpio: registering 24 gpios
  55. [ 0.412543] rt2880_gpio 10000600.gpio: registering 24 irq handlers
  56. [ 0.418683] rt2880_gpio 10000638.gpio: registering 16 gpios
  57. [ 0.424077] rt2880_gpio 10000638.gpio: registering 16 irq handlers
  58. [ 0.430229] rt2880_gpio 10000660.gpio: registering 32 gpios
  59. [ 0.435624] rt2880_gpio 10000660.gpio: registering 32 irq handlers
  60. [ 0.442412] PCI host bridge to bus 0000:00
  61. [ 0.446381] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
  62. [ 0.453004] pci_bus 0000:00: root bus resource [io 0xffffffff]
  63. [ 0.458762] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  64. [ 0.465346] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  65. [ 0.473087] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
  66. [ 0.473135] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  67. [ 0.473157] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
  68. [ 0.473237] pci 0000:00:00.0: supports D1
  69. [ 0.473256] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  70. [ 0.473550] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  71. [ 0.481465] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
  72. [ 0.481538] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
  73. [ 0.481601] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  74. [ 0.481690] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  75. [ 0.481934] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  76. [ 0.481963] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
  77. [ 0.482023] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
  78. [ 0.488430] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
  79. [ 0.495152] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
  80. [ 0.501752] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
  81. [ 0.508758] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
  82. [ 0.515370] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
  83. [ 0.522466] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
  84. [ 0.529476] pci 0000:00:00.0: PCI bridge to [bus 01]
  85. [ 0.534287] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
  86. [ 0.540886] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref]
  87. [ 0.547905] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
  88. [ 0.553571] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
  89. [ 0.560286] clocksource: Switched to clocksource systick
  90. [ 0.566996] NET: Registered protocol family 2
  91. [ 0.572108] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  92. [ 0.578839] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  93. [ 0.585061] TCP: Hash tables configured (established 1024 bind 1024)
  94. [ 0.591284] UDP hash table entries: 256 (order: 0, 4096 bytes)
  95. [ 0.596910] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  96. [ 0.603295] NET: Registered protocol family 1
  97. [ 0.607550] PCI: CLS 80 bytes, default 32
  98. [ 0.612271] rt-timer 10000100.timer: maximum frequency is 1220Hz
  99. [ 0.619056] Crashlog allocated RAM at address 0x3f00000
  100. [ 0.640233] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  101. [ 0.645922] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  102. [ 0.658571] io scheduler noop registered
  103. [ 0.662383] io scheduler deadline registered (default)
  104. [ 0.667559] ralink-usb-phy usbphy: invalid resource
  105. [ 0.672985] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  106. [ 0.680324] console [ttyS0] disabled
  107. [ 0.683768] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
  108. [ 0.693409] console [ttyS0] enabled
  109. [ 0.700463] bootconsole [early0] disabled
  110. [ 0.709901] !!! nand page size = 2048, addr len=4
  111. [ 0.717122] mtk_nand_probe: alloc 1388, at 87c8e000 , btt(87c8f0c0, 100), ranfc_mtd:87c8f1c0
  112. [ 0.725864] 10 ofpart partitions found on MTD device ra_nfc
  113. [ 0.731564] Creating 10 MTD partitions on "ra_nfc":
  114. [ 0.736549] 0x000000000000-0x000000040000 : "Bootloader"
  115. [ 0.743709] 0x000000040000-0x000000080000 : "Config"
  116. [ 0.750677] 0x000000080000-0x0000000c0000 : "Bdata"
  117. [ 0.757504] 0x0000000c0000-0x000000100000 : "Factory"
  118. [ 0.764594] 0x000000100000-0x000000140000 : "crash"
  119. [ 0.771530] 0x000000140000-0x000000180000 : "crash_syslog"
  120. [ 0.779005] 0x000000180000-0x000000200000 : "reserved0"
  121. [ 0.786283] 0x000000200000-0x000000600000 : "kernel0_rsvd"
  122. [ 0.794611] 0x000000600000-0x000000a00000 : "kernel"
  123. [ 0.802392] 0x000000a00000-0x000008000000 : "ubi"
  124. [ 0.837330] gsw: setting port4 to ephy mode
  125. [ 0.841695] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 0 link up (100Mbps/Full duplex)
  126. [ 0.851496] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
  127. [ 0.858346] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
  128. [ 0.867389] rt2880_wdt 10000120.watchdog: Initialized
  129. [ 0.874182] NET: Registered protocol family 10
  130. [ 0.883138] NET: Registered protocol family 17
  131. [ 0.887769] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  132. [ 0.900714] 8021q: 802.1Q VLAN Support v1.8
  133. [ 0.908744] UBI: auto-attach mtd9
  134. [ 0.912045] ubi0: attaching mtd9
  135. [ 1.454847] ubi0: scanning is finished
  136. [ 1.469917] ubi0: attached mtd9 (name "ubi", size 118 MiB)
  137. [ 1.475589] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  138. [ 1.482616] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  139. [ 1.489543] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  140. [ 1.496658] ubi0: good PEBs: 944, bad PEBs: 0, corrupted PEBs: 0
  141. [ 1.502801] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  142. [ 1.510173] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 388871047
  143. [ 1.519416] ubi0: available PEBs: 0, total reserved PEBs: 944, PEBs reserved for bad PEB handling: 20
  144. [ 1.529916] ubi0: background thread "ubi_bgt0d" started, PID 282
  145. [ 1.537117] block ubiblock0_0: created from ubi0:0(rootfs)
  146. [ 1.542785] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  147. [ 1.557089] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  148. [ 1.565553] Freeing unused kernel memory: 200K
  149. [ 2.505302] init: Console is alive
  150. [ 2.508992] init: - watchdog -
  151. [ 3.367478] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  152. [ 3.466822] usbcore: registered new interface driver usbfs
  153. [ 3.472614] usbcore: registered new interface driver hub
  154. [ 3.478164] usbcore: registered new device driver usb
  155. [ 3.488980] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  156. [ 3.497338] ehci-platform: EHCI generic platform driver
  157. [ 3.513069] phy phy-usbphy.0: remote usb device wakeup disabled
  158. [ 3.519117] phy phy-usbphy.0: UTMI 16bit 30MHz
  159. [ 3.523697] ehci-platform 101c0000.ehci: EHCI Host Controller
  160. [ 3.529593] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
  161. [ 3.537823] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
  162. [ 3.549854] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
  163. [ 3.557348] hub 1-0:1.0: USB hub found
  164. [ 3.561614] hub 1-0:1.0: 1 port detected
  165. [ 3.568772] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  166. [ 3.576660] ohci-platform: OHCI generic platform driver
  167. [ 3.582319] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
  168. [ 3.589279] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
  169. [ 3.597519] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
  170. [ 3.628114] hub 2-0:1.0: USB hub found
  171. [ 3.632300] hub 2-0:1.0: 1 port detected
  172. [ 3.639832] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  173. [ 3.648520] init: - preinit -
  174. [ 4.578549] 8021q: adding VLAN 0 to HW filter on device eth0
  175. [ 4.735703] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
  176. [ 6.003849] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 363
  177. [ 6.031530] UBIFS (ubi0:1): recovery needed
  178. [ 6.129570] UBIFS (ubi0:1): recovery completed
  179. [ 6.134228] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  180. [ 6.142262] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  181. [ 6.152414] UBIFS (ubi0:1): FS size: 112881664 bytes (107 MiB, 889 LEBs), journal size 5713920 bytes (5 MiB, 45 LEBs)
  182. [ 6.163253] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
  183. [ 6.170028] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 52B22626-55B4-4D50-AC77-1657712FF188, small LPT model
  184. [ 6.182835] UBIFS (ubi0:1): full atime support is enabled.
  185. [ 6.194681] mount_root: switching to ubifs overlay
  186. [ 6.208851] urandom-seed: Seeding with /etc/urandom.seed
  187. [ 6.344300] procd: - early -
  188. [ 6.348079] procd: - watchdog -
  189. [ 6.763755] procd: - watchdog -
  190. [ 6.767254] procd: - ubus -
  191. [ 6.842619] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
  192. [ 6.853774] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
  193. [ 6.863556] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
  194. [ 6.872843] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
  195. [ 6.884542] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
  196. [ 6.893832] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
  197. [ 6.903260] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
  198. [ 6.912662] random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
  199. [ 6.922320] procd: - init -
  200. [ 7.284166] kmodloader: loading kernel modules from /etc/modules.d/*
  201. [ 7.297703] ip6_tables: (C) 2000-2006 Netfilter Core Team
  202. [ 7.314475] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
  203. [ 7.322729] Backport generated by backports.git backports-20160324-13-g24da7d3c
  204. [ 7.385195] mt76x2e 0000:01:00.0: ASIC revision: 76120044
  205. [ 7.396856] mt76x2e 0000:01:00.0: ROM patch already applied
  206. [ 7.497910] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
  207. [ 7.503522] mt76x2e 0000:01:00.0: Build: 1
  208. [ 7.507743] mt76x2e 0000:01:00.0: Build Time: 201507311614____
  209. [ 7.523188] mt76x2e 0000:01:00.0: Firmware running!
  210. [ 7.529290] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  211. [ 7.556442] ip_tables: (C) 2000-2006 Netfilter Core Team
  212. [ 7.577325] nf_conntrack version 0.5.0 (1960 buckets, 7840 max)
  213. [ 7.711841] xt_time: kernel timezone is -0000
  214. [ 7.729874] PPP generic driver version 2.4.2
  215. [ 7.737173] NET: Registered protocol family 24
  216. [ 7.766000] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "Factory"
  217. [ 7.773465] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
  218. [ 7.781381] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected
  219. [ 7.789133] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  220. [ 7.857116] kmodloader: done loading kernel modules from /etc/modules.d/*
  221. [ 8.945781] random: jshn: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
  222. [ 13.458652] 8021q: adding VLAN 0 to HW filter on device eth0
  223. [ 13.478063] device eth0.1 entered promiscuous mode
  224. [ 13.482971] device eth0 entered promiscuous mode
  225. [ 13.500426] br-lan: port 1(eth0.1) entered forwarding state
  226. [ 13.506233] br-lan: port 1(eth0.1) entered forwarding state
  227. [ 15.503236] br-lan: port 1(eth0.1) entered forwarding state
  228. [ 17.409366] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  229. [ 18.084154] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  230. [ 18.090919] device wlan0 entered promiscuous mode
  231. [ 18.169311] device wlan1 entered promiscuous mode
  232. [ 18.174215] br-lan: port 3(wlan1) entered forwarding state
  233. [ 18.179912] br-lan: port 3(wlan1) entered forwarding state
  234. [ 18.274905] br-lan: port 3(wlan1) entered disabled state
  235. [ 19.892899] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  236. [ 19.899659] br-lan: port 3(wlan1) entered forwarding state
  237. [ 19.905365] br-lan: port 3(wlan1) entered forwarding state
  238. [ 20.304871] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  239. [ 20.311626] br-lan: port 2(wlan0) entered forwarding state
  240. [ 20.317318] br-lan: port 2(wlan0) entered forwarding state
  241. [ 21.361999] br-lan: port 3(wlan1) entered forwarding state
  242. [ 21.792621] br-lan: port 2(wlan0) entered forwarding state
  243. [ 30.352126] random: nonblocking pool is initialized
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!