API tools faq
paste
hootiegibbon

smartctrl.freebsd

hootiegibbon
Aug 12th, 2012
89
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.54 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.43 2012-06-30 r3573 [FreeBSD 9.1-PRERELEASE amd64] (local build)
  2. Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: ST9160824AS
  6. Serial Number: 5MAB6PRN
  7. Firmware Version: 3.CLG
  8. User Capacity: 160,041,885,696 bytes [160 GB]
  9. Sector Size: 512 bytes logical/physical
  10. Device is: Not in smartctl database [for details use: -P showall]
  11. ATA Version is: 7
  12. ATA Standard is: Exact ATA specification draft version not indicated
  13. Local Time is: Sun Aug 12 22:30:53 2012 BST
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled
  16.  
  17. === START OF READ SMART DATA SECTION ===
  18. SMART overall-health self-assessment test result: PASSED
  19. See vendor-specific Attribute list for marginal Attributes.
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x00) Offline data collection activity
  23. was never started.
  24. Auto Offline Data Collection: Disabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: ( 426) seconds.
  30. Offline data collection
  31. capabilities: (0x53) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. No Offline surface scan supported.
  36. Self-test supported.
  37. No Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 1) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 80) minutes.
  48. SCT capabilities: (0x0001) SCT Status supported.
  49.  
  50. SMART Attributes Data Structure revision number: 10
  51. Vendor Specific SMART Attributes with Thresholds:
  52. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  53. 1 Raw_Read_Error_Rate 0x000f 100 079 034 Pre-fail Always - 185513279
  54. 3 Spin_Up_Time 0x0003 100 098 000 Pre-fail Always - 0
  55. 4 Start_Stop_Count 0x0032 001 001 020 Old_age Always FAILING_NOW 422946
  56. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  57. 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 4408959865
  58. 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 5089 (156 53 0)
  59. 10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
  60. 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1714
  61. 187 Reported_Uncorrect 0x0032 070 070 000 Old_age Always - 30
  62. 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 158
  63. 190 Airflow_Temperature_Cel 0x0022 062 054 045 Old_age Always - 38 (Min/Max 38/38)
  64. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 79
  65. 192 Power-Off_Retract_Count 0x0032 096 096 000 Old_age Always - 9777
  66. 193 Load_Cycle_Count 0x0022 001 001 000 Old_age Always - 435282
  67. 194 Temperature_Celsius 0x001a 038 046 000 Old_age Always - 38 (0 6 0 0 0)
  68. 195 Hardware_ECC_Recovered 0x0012 077 055 000 Old_age Always - 185513279
  69. 196 Reallocated_Event_Count 0x0010 096 096 000 Old_age Offline - 3570 (64703 0)
  70. 197 Current_Pending_Sector 0x003e 100 100 000 Old_age Always - 0
  71. 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
  72. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  73. 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
  74. 202 Data_Address_Mark_Errs 0x0000 100 253 000 Old_age Offline - 0
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 30 (device log contains only the most recent five errors)
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 30 occurred at disk power-on lifetime: 1051 hours (43 days + 19 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 40 51 00 d1 ae d3 40 Error: UNC at LBA = 0x00d3aed1 = 13872849
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. 25 00 40 9f ae d3 40 00 03:02:48.897 READ DMA EXT
  104. 25 00 01 00 00 00 40 00 03:02:48.897 READ DMA EXT
  105. 25 00 01 00 00 00 40 00 03:02:48.897 READ DMA EXT
  106. 25 00 01 00 00 00 40 00 03:02:46.707 READ DMA EXT
  107. 35 00 08 2f 31 b4 40 00 03:02:46.226 WRITE DMA EXT
  108.  
  109. Error 29 occurred at disk power-on lifetime: 1051 hours (43 days + 19 hours)
  110. When the command that caused the error occurred, the device was active or idle.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 40 51 00 d1 ae d3 40 Error: UNC at LBA = 0x00d3aed1 = 13872849
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. 25 00 40 9f ae d3 40 00 03:02:46.205 READ DMA EXT
  121. 25 00 01 00 00 00 40 00 03:02:44.013 READ DMA EXT
  122. 35 00 08 c7 00 00 40 00 03:02:43.770 WRITE DMA EXT
  123. 25 00 01 00 00 00 40 00 03:02:46.707 READ DMA EXT
  124. 35 00 08 d7 00 00 40 00 03:02:46.226 WRITE DMA EXT
  125.  
  126. Error 28 occurred at disk power-on lifetime: 1051 hours (43 days + 19 hours)
  127. When the command that caused the error occurred, the device was active or idle.
  128.  
  129. After command completion occurred, registers were:
  130. ER ST SC SN CL CH DH
  131. -- -- -- -- -- -- --
  132. 40 51 00 d1 ae d3 40 Error: UNC at LBA = 0x00d3aed1 = 13872849
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  136. -- -- -- -- -- -- -- -- ---------------- --------------------
  137. 25 00 40 9f ae d3 40 00 03:02:43.737 READ DMA EXT
  138. ea 00 00 00 00 00 40 00 03:02:44.013 FLUSH CACHE EXT
  139. 35 00 08 df 00 00 40 00 03:02:43.770 WRITE DMA EXT
  140. 35 00 08 07 96 5a 40 00 03:02:43.769 WRITE DMA EXT
  141. 35 00 08 07 96 5a 40 00 03:02:43.769 WRITE DMA EXT
  142.  
  143. Error 27 occurred at disk power-on lifetime: 1051 hours (43 days + 19 hours)
  144. When the command that caused the error occurred, the device was active or idle.
  145.  
  146. After command completion occurred, registers were:
  147. ER ST SC SN CL CH DH
  148. -- -- -- -- -- -- --
  149. 40 51 00 d1 ae d3 40 Error: UNC at LBA = 0x00d3aed1 = 13872849
  150.  
  151. Commands leading to the command that caused the error were:
  152. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  153. -- -- -- -- -- -- -- -- ---------------- --------------------
  154. 25 00 40 9f ae d3 40 00 03:02:40.857 READ DMA EXT
  155. 35 00 08 07 33 61 40 00 03:02:40.857 WRITE DMA EXT
  156. 35 00 08 57 25 61 40 00 03:02:40.857 WRITE DMA EXT
  157. 35 00 08 0f e1 60 40 00 03:02:40.856 WRITE DMA EXT
  158. 35 00 08 07 7f 60 40 00 03:02:40.840 WRITE DMA EXT
  159.  
  160. Error 26 occurred at disk power-on lifetime: 1051 hours (43 days + 19 hours)
  161. When the command that caused the error occurred, the device was active or idle.
  162.  
  163. After command completion occurred, registers were:
  164. ER ST SC SN CL CH DH
  165. -- -- -- -- -- -- --
  166. 40 51 00 d1 ae d3 40 Error: UNC at LBA = 0x00d3aed1 = 13872849
  167.  
  168. Commands leading to the command that caused the error were:
  169. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  170. -- -- -- -- -- -- -- -- ---------------- --------------------
  171. 25 00 40 9f ae d3 40 00 03:02:35.861 READ DMA EXT
  172. 35 00 08 d7 00 00 40 00 03:02:35.861 WRITE DMA EXT
  173. 25 00 01 00 00 00 40 00 03:02:38.573 READ DMA EXT
  174. 35 00 18 6f 94 01 40 00 03:02:38.573 WRITE DMA EXT
  175. 35 00 08 df 95 5a 40 00 03:02:38.553 WRITE DMA EXT
  176.  
  177. SMART Self-test log structure revision number 1
  178. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  179. # 1 Short offline Completed without error 00% 1884 -
  180.  
  181. SMART Selective self-test log data structure revision number 1
  182. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  183. 1 0 0 Not_testing
  184. 2 0 0 Not_testing
  185. 3 0 0 Not_testing
  186. 4 0 0 Not_testing
  187. 5 0 0 Not_testing
  188. Selective self-test flags (0x0):
  189. After scanning selected spans, do NOT read-scan remainder of disk.
  190. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!