Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Format: Log Type - Time(microsec) - Message - Optional Info
- Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
- S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2.C2-00037
- S - IMAGE_VARIANT_STRING=DAASANAZA
- S - OEM_IMAGE_VERSION_STRING=administrator-p
- S - Boot Config, 0x000000e1
- B - 1566 - PBL, Start
- B - 4542 - bootable_media_detect_entry, Start
- B - 176032 - bootable_media_detect_success, Start
- B - 176036 - elf_loader_entry, Start
- B - 176648 - auth_hash_seg_entry, Start
- B - 176909 - auth_hash_seg_exit, Start
- B - 190795 - elf_segs_hash_verify_entry, Start
- B - 249906 - PBL, End
- B - 262757 - SBL1, Start
- B - 321195 - boot_flash_init, Start
- D - 30 - boot_flash_init, Delta
- B - 327844 - boot_config_data_table_init, Start
- D - 6954 - boot_config_data_table_init, Delta - (0 Bytes)
- B - 339404 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
- B - 345595 - pm_device_init, Start
- B - 348920 - pm_device_init, TEST - MSM8909 detected
- B - 354288 - pm_device_init, INFO - PM8909 is selected
- B - 368684 - PM_SET_VAL:Skip
- D - 21441 - pm_device_init, Delta
- B - 370087 - sbl1_ddr_set_params, Start
- B - 372466 - cpr_init, Start
- D - 0 - cpr_init, Delta
- B - 378108 - Pre_DDR_clock_init, Start
- D - 213 - Pre_DDR_clock_init, Delta
- D - 0 - sbl1_ddr_set_params, Delta
- B - 391101 - pm_driver_init, Start
- B - 397720 - --> Charge init
- B - 4122 - battery voltage
- B - 401227 - boot up
- B - 10 - Current status
- D - 10736 - pm_driver_init, Delta
- B - 413580 - clock_init, Start
- D - 152 - clock_init, Delta
- B - 414525 - Image Load, Start
- D - 35075 - QSEE Image Loaded, Delta - (490096 Bytes)
- B - 449661 - Image Load, Start
- D - 274 - SEC Image Loaded, Delta - (2048 Bytes)
- B - 457927 - sbl1_efs_handle_cookies, Start
- D - 671 - sbl1_efs_handle_cookies, Delta
- B - 464637 - Image Load, Start
- D - 14213 - RPM Image Loaded, Delta - (156564 Bytes)
- B - 478911 - Image Load, Start
- D - 18818 - APPSBL Image Loaded, Delta - (499160 Bytes)
- B - 497760 - QSEE Execution, Start
- D - 274 - QSEE Execution, Delta
- B - 503494 - SBL1, End
- D - 243024 - SBL1, Delta
- S - Throughput, 25000 KB/s (1147868 Bytes, 44799 us)
- S - DDR Frequency, 400 MHz
- Android Bootloader - UART_DM Initialized!!!
- [0] [0] welcome to lk
- [10] [10] platform_init()
- [10] [10] target_init()
- [50] [50] SDHC Running in HS200 mode
- [60] [60] Done initialization of the card
- [70] [70] pm8x41_get_is_cold_boot: cold boot
- [80] [80] Waiting for the RPM to populate smd channel table
- [80] [80] Not able to search the panel:
- [140] [140] Config MIPI_VIDEO_PANEL.
- [300] [300] Panic Lut0 0 Lut1 fff Robest 0
- [300] [300] ERROR: Splash image header invalid
- [330] [330] Turn on MIPI_VIDEO_PANEL.
- [350] [350] Video lane tested successfully
- CTRL+C: enter instruction mode
- CTRL+C: out instruction mode
- input FCT : enter instruction mode
- [1440] [1440] is_enter_fctmode ch: out fct instruction mode
- [1450] [1450] Recovery command: 32 normal1
- [1450] [1450] Unable to locate /bootselect partition
- [1460] [1460] boot_verifier: Device is in ORANGE boot state.
- [1460] [1460] Device is unlocked! Skipping verification...
- [1470] [1470] Loading boot image (16896000): start
- [1580] [1580] Loading boot image (16896000): done
- [1580] [1580] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
- [1610] [1610] Best match DTB tags 245/00000008/0x00000000/0/1000d/0/0/0/90a3f928/2825b
- [1620] [1620] Using pmic info 0x1000d/0x0/0x0/0x0 for device 0x1010d/0x0/0x0/0x0
- [1620] [1620] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=782490[1650] [1650] Updating device tree: start
- [1660] [1660] Updating device tree: done
- [1670] [1670] Channel alloc freed
- [1680] [1680] Turn off MIPI_VIDEO_PANEL.
- [1680] [1680] Continuous splash enabled, keeping panel alive.
- [1680] [1680] booting linux @ 0x80008000, ramdisk @ 0x82000000 (1350266), tags/device tree @ 0x81e00000
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.49-gc25540a-00013-gb501ab6 (BspDeveloper2@BspDeveloper2) (gcc version 4.8 (GCC) ) #8 SMP PREEMPT Wed Sep 25 17:31:11 IST 2019
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8909 (Flattened Device Tree), model: Qualcomm Technologies, Inc. MSM8909-PM8909 1GB MTP
- [ 0.000000] cma: Found external_image__region@0, memory base 0x87a00000, size 6 MiB, limit 0xffffffff
- [ 0.000000] cma: Found modem_adsp_region@0, memory base 0x88000000, size 85 MiB, limit 0xffffffff
- [ 0.000000] cma: Found pheripheral_region@0, memory base 0x8d500000, size 7 MiB, limit 0xffffffff
- [ 0.000000] cma: Found venus_qseecom_region@0, memory base 0x00000000, size 6 MiB, limit 0x90000000
- [ 0.000000] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff
- [ 0.000000] cma: Found splash_region@83000000, memory base 0x83000000, size 12 MiB, limit 0xffffffff
- [ 0.000000] cma: CMA: reserved 6 MiB at 0x87a00000 for external_image_mem
- [ 0.000000] cma: CMA: reserved 85 MiB at 0x88000000 for modem_adsp_mem
- [ 0.000000] cma: CMA: reserved 7 MiB at 0x8d500000 for peripheral_mem
- [ 0.000000] cma: CMA: reserved 8 MiB at 0x8f800000 for venus_qseecom_mem
- [ 0.000000] cma: CMA: reserved 4 MiB at 0xff800000 for audio_mem
- [ 0.000000] cma: CMA: reserved 12 MiB at 0x83000000 for cont_splash_mem
- [ 0.000000] cma: CMA: reserved 8 MiB at 0xaf000000 for default region
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c6c54000 s33472 r8192 d15680 u57344
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 494639
- [ 0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=7824900.sdhci androidboot.serialno=3122bcdb androidboot.baseband=msm mdss_mdp3.panel=1:dsi:0:qcom,mdss_dsi_ili9881c_720p_video:1:none
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1893768K/1996796K available (10541K kernel code, 1078K rwdata, 4600K rodata, 1420K init, 1349K bss, 103028K reserved, 1314812K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0fc96f4 (16134 kB)
- [ 0.000000] .init : 0xc1000000 - 0xc11632c0 (1421 kB)
- [ 0.000000] .data : 0xc1164000 - 0xc127199c (1079 kB)
- [ 0.000000] .bss : 0xc1271a60 - 0xc13c2fe4 (1350 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] HMP scheduling enabled.
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] kmemleak: Kernel memory leak detector disabled
- [ 0.000839] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000858] pid_max: default: 32768 minimum: 301
- [ 0.001220] Security Framework initialized
- [ 0.001264] SELinux: Initializing.
- [ 0.001547] Mount-cache hash table entries: 512
- [ 0.003225] Initializing cgroup subsys debug
- [ 0.003245] Initializing cgroup subsys freezer
- [ 0.003299] CPU: Testing write buffer coherency: ok
- [ 0.004151] /cpus/cpu@0 missing clock-frequency property
- [ 0.004175] /cpus/cpu@1 missing clock-frequency property
- [ 0.004194] /cpus/cpu@2 missing clock-frequency property
- [ 0.004215] /cpus/cpu@3 missing clock-frequency property
- [ 0.004231] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.004390] Setting up static identity map for 0xc0ab1178 - 0xc0ab11d0
- [ 0.006496] ftrace: Allocated trace_printk buffers
- [ 0.031287] MSM Memory Dump base table set up
- [ 0.031376] MSM Memory Dump apps data table set up
- [ 0.031424] Configuring XPU violations to be fatal errors
- [ 0.041337] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.051293] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.061003] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.061303] Brought up 4 CPUs
- [ 0.061335] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.061345] CPU: All CPU(s) started in SVC mode.
- [ 0.083234] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.083269] ------------[ cut here ]------------
- [ 0.083295] WARNING: at /home/nvme/sc20/kernel/fs/proc/generic.c:102 __xlate_proc_name+0xa0/0xb4()
- [ 0.083305] name 'cpu/vfp_bounce'
- [ 0.083313] Modules linked in:
- [ 0.083331] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.49-gc25540a-00013-gb501ab6 #8
- [ 0.083362] [<c010be54>] (unwind_backtrace+0x0/0x11c) from [<c0109a04>] (show_stack+0x10/0x14)
- [ 0.083390] [<c0109a04>] (show_stack+0x10/0x14) from [<c0121784>] (warn_slowpath_common+0x4c/0x6c)
- [ 0.083416] [<c0121784>] (warn_slowpath_common+0x4c/0x6c) from [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c)
- [ 0.083440] [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c) from [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4)
- [ 0.083463] [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4) from [<c024ba6c>] (__proc_create+0x4c/0xf4)
- [ 0.083486] [<c024ba6c>] (__proc_create+0x4c/0xf4) from [<c024be50>] (proc_create_data+0x58/0x98)
- [ 0.083513] [<c024be50>] (proc_create_data+0x58/0x98) from [<c1002e34>] (vfp_init+0x16c/0x1d8)
- [ 0.083537] [<c1002e34>] (vfp_init+0x16c/0x1d8) from [<c0100670>] (do_one_initcall+0xb8/0x160)
- [ 0.083561] [<c0100670>] (do_one_initcall+0xb8/0x160) from [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0)
- [ 0.083586] [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0) from [<c0a9702c>] (kernel_init+0x8/0xe4)
- [ 0.083609] [<c0a9702c>] (kernel_init+0x8/0xe4) from [<c0105ff8>] (ret_from_fork+0x14/0x3c)
- [ 0.083658] ---[ end trace da227214a82491b7 ]---
- [ 0.083668] Failed to create procfs node for VFP bounce reporting
- [ 0.087171] pinctrl core: initialized pinctrl subsystem
- [ 0.087782] regulator-dummy: no parameters
- [ 0.103502] NET: Registered protocol family 16
- [ 0.117892] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.181809] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
- [ 0.190809] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
- [ 0.191221] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
- [ 0.193704] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
- [ 0.198469] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
- [ 0.198838] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
- [ 0.212415] KPI: Bootloader start count = 18893
- [ 0.212430] KPI: Bootloader end count = 74512
- [ 0.212440] KPI: Bootloader display count = 30033
- [ 0.212449] KPI: Bootloader load kernel count = 3563
- [ 0.212459] KPI: Kernel MPM timestamp = 171794
- [ 0.212469] KPI: Kernel MPM Clock frequency = 32768
- [ 0.212499] socinfo_print: v10, id=245, ver=2.0, raw_id=2400, raw_ver=1, hw_plat=8, hw_plat_ver=65536
- [ 0.212499] accessory_chip=0, hw_plat_subtype=0, pmic_model=65549, pmic_die_revision=65537 foundry_id=1 serial_number=270169395
- [ 0.214682] smd_channel_probe_worker: allocation table not initialized
- [ 0.214705] smd_channel_probe_worker: allocation table not initialized
- [ 0.221790] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.221806] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.222437] msm_mpm_dev_probe(): Cannot get clk resource for XO
- [ 0.222471] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
- [ 0.223034] msm-jtag-fuse 5e01c.jtagfuse: JTag Fuse initialized
- [ 0.225149] pm8909_s1_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.226019] pm8909_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.226856] pm8909_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.227665] pm8909_s1_corner_so: 0 <--> 0 mV at 0 mV normal idle
- [ 0.228481] pm8909_s2: 1850 mV normal idle
- [ 0.229301] pm8909_l1: 1000 mV normal idle
- [ 0.230127] pm8909_l2: 1200 mV normal idle
- [ 0.231016] pm8909_l3: 500 <--> 1350 mV at 0 mV normal idle
- [ 0.231794] pm8909_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.232534] pm8909_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
- [ 0.233312] pm8909_l4: 1800 mV normal idle
- [ 0.234174] pm8909_l5: 1800 mV normal idle
- [ 0.235075] pm8909_l6: 1800 mV normal idle
- [ 0.235887] pm8909_l7: 1800 mV normal idle
- [ 0.236650] pm8909_l7_ao: 1800 mV normal idle
- [ 0.237460] pm8909_l7_so: 1800 mV normal idle
- [ 0.238308] pm8909_l8: 2850 <--> 2900 mV at 2850 mV normal idle
- [ 0.239097] pm8909_l9: 3000 <--> 3300 mV at 3000 mV normal idle
- [ 0.239986] pm8909_l10: 1225 <--> 1300 mV at 1225 mV normal idle
- [ 0.240943] pm8909_l11: 1800 <--> 2950 mV at 1800 mV normal idle
- [ 0.241744] pm8909_l12: 1800 <--> 2950 mV at 1800 mV normal idle
- [ 0.242595] pm8909_l13: 3075 mV normal idle
- [ 0.243416] pm8909_l14: 1800 <--> 3000 mV at 1800 mV normal idle
- [ 0.244329] pm8909_l15: 1800 <--> 3000 mV at 1800 mV normal idle
- [ 0.245098] pm8909_l17: 2800 <--> 2850 mV at 2800 mV normal idle
- [ 0.245954] pm8909_l18: 2700 mV normal idle
- [ 0.247888] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
- [ 0.247988] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
- [ 0.248008] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
- [ 0.248049] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.248320] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
- [ 0.248396] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
- [ 0.248413] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
- [ 0.248445] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.248698] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
- [ 0.248767] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
- [ 0.248784] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
- [ 0.248814] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.249062] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
- [ 0.249132] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
- [ 0.249149] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
- [ 0.249180] platform 78b7000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.249429] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
- [ 0.249500] i2c-msm-v2 78b5000.i2c: error on clk_get(core_clk):-517
- [ 0.249517] i2c-msm-v2 78b5000.i2c: error probe() failed with err:-517
- [ 0.249546] platform 78b5000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.254861] sps:sps is ready.
- [ 0.267019] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks.
- [ 0.287305] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks
- [ 0.288546] clock-a7 b011050.qcom,clock-a7: Speed bin: 2 PVS Version: 0
- [ 0.290871] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
- [ 0.291083] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.291102] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.291725] i2c i2c-2: of_i2c: modalias failure on /soc/i2c@78b6000/nq@28
- [ 0.292063] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
- [ 0.292159] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.292175] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.292952] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
- [ 0.293042] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.293058] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.294479] kworker/u8:2 (51) used greatest stack depth: 6892 bytes left
- [ 0.294634] kworker/u8:2 (50) used greatest stack depth: 6676 bytes left
- [ 0.295919] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
- [ 0.296024] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.296041] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.299516] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
- [ 0.299717] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.299735] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.351816] bio: create slab <bio-0> at 0
- [ 0.354260] spk_vreg: no parameters
- [ 0.355137] oem_otg_ext_vreg: no parameters
- [ 0.356928] SCSI subsystem initialized
- [ 0.357783] usbcore: registered new interface driver usbfs
- [ 0.357940] usbcore: registered new interface driver hub
- [ 0.358207] usbcore: registered new device driver usb
- [ 0.358387] media: Linux media interface: v0.10
- [ 0.358462] Linux video capture interface: v2.00
- [ 0.358768] BATTERY: batterydata_init: Battery-data device created!
- [ 0.360423] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
- [ 0.360682] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
- [ 0.361049] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
- [ 0.361405] ION heap system created
- [ 0.361647] ION heap qsecom created at 0x8f800000 with size 600000
- [ 0.361676] ION heap audio created at 0xff800000 with size 314000
- [ 0.361700] ION heap pil_2 created at 0x88000000 with size 5500000
- [ 0.362195] msm_bus_fabric_init_driver
- [ 0.362481] msm_bus_device 580000.ad-hoc-bus: Dev 0
- [ 0.362505] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.362681] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
- [ 0.362720] msm_bus_device 580000.ad-hoc-bus: Dev 4096
- [ 0.362739] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.362751] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.362951] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
- [ 0.363008] msm_bus_device 580000.ad-hoc-bus: Dev 1024
- [ 0.363027] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.363039] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.363200] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
- [ 0.363234] msm_bus_device 580000.ad-hoc-bus: Dev 2048
- [ 0.363254] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.363289] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
- [ 0.366138] msm_bus_init_clk: Valid node clk node 0 ctx 0
- [ 0.366147] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
- [ 0.366284] msm_bus_init_clk: Valid node clk node 4096 ctx 1msm_bus_init_clk: Valid node clk node 1024 ctx 0
- [ 0.366410] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid Iface clk node 1024
- [ 0.366530] msm_bus_init_clk: Valid node clk node 2048 ctx 0msm_bus_init_clk: Valid node clk node 2048 ctx 1
- [ 0.381208] gdsc_venus: no parameters
- [ 0.381655] gdsc_mdss: no parameters
- [ 0.382127] gdsc_vfe: no parameters
- [ 0.382600] gdsc_oxili_gx: no parameters
- [ 0.382954] gdsc_venus_core0: fast normal
- [ 0.383975] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
- [ 0.385209] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
- [ 0.386251] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f0320000, with 2 ctx banks
- [ 0.387156] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0380000, with 22 ctx banks
- [ 0.394187] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
- [ 0.394385] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
- [ 0.394597] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2
- [ 0.394782] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
- [ 0.394966] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
- [ 0.395152] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
- [ 0.395338] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
- [ 0.395552] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
- [ 0.395741] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
- [ 0.395993] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
- [ 0.396259] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
- [ 0.396447] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
- [ 0.396634] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
- [ 0.396894] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
- [ 0.397086] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
- [ 0.397337] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
- [ 0.397528] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
- [ 0.397711] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
- [ 0.397919] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
- [ 0.398105] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
- [ 0.398289] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
- [ 0.398472] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10
- [ 0.398654] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17
- [ 0.398868] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31
- [ 0.400562] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.401512] Bluetooth: ee855f10
- [ 0.401575] NET: Registered protocol family 31
- [ 0.401585] Bluetooth: ee855f10
- [ 0.401602] Bluetooth: ee855f08Bluetooth: ee855ef8
- [ 0.401725] Bluetooth: ee855f00[ 0.402193] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.402232] cfg80211: World regulatory domain updated:
- [ 0.402240] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 0.402250] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.402259] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.402268] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 0.402277] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.402286] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.402295] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.402304] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.402313] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- [ 0.403357] Switching to clocksource arch_sys_counter
- [ 0.468524] NET: Registered protocol family 2
- [ 0.469490] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.470071] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [ 0.470245] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.470435] TCP: reno registered
- [ 0.470524] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.470626] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.471067] NET: Registered protocol family 1
- [ 0.472122] gcc-mdss-8909 qcom,gcc-mdss.31: Registered GCC MDSS clocks.
- [ 0.472872] Trying to unpack rootfs image as initramfs...
- [ 0.565631] Freeing initrd memory: 1316K (c2000000 - c2149000)
- [ 0.568612] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
- [ 0.572979] Initialise module verification
- [ 0.573056] audit: initializing netlink socket (disabled)
- [ 0.573245] type=2000 audit(0.559:1): initialized
- [ 0.794285] bounce pool size: 64 pages
- [ 0.805439] fuse init (API version 7.23)
- [ 0.810975] Key type asymmetric registered
- [ 0.810989] Asymmetric key parser 'x509' registered
- [ 0.811306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 0.811318] io scheduler noop registered
- [ 0.811326] io scheduler deadline registered
- [ 0.811360] io scheduler row registered
- [ 0.811585] io scheduler cfq registered (default)
- [ 0.815816] platform qcom,smp2pgpio-ssr-smp2p-4-in.14: Driver smp2pgpio requests probe deferral
- [ 0.816076] platform qcom,smp2pgpio-ssr-smp2p-4-out.15: Driver smp2pgpio requests probe deferral
- [ 0.816332] platform qcom,smp2pgpio-ssr-smp2p-1-in.16: Driver smp2pgpio requests probe deferral
- [ 0.816587] platform qcom,smp2pgpio-ssr-smp2p-1-out.17: Driver smp2pgpio requests probe deferral
- [ 0.820225] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.820580] mdss_dsi_panel_init: Panel Name = ili9881c 720p video mode dsi panel
- [ 0.820999] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.821023] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.821065] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.821080] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.821091] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.821117] mdss_dsi_parse_panel_features:1215, Disp_en gpio not specified
- [ 0.821138] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.821677] dsi_panel_device_register:1884, TE gpio not specified
- [ 0.821696] dsi_panel_device_register: bklt_en gpio not specified
- [ 0.821842] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
- [ 0.821849] PLL 1 Clock's did not register
- [ 0.821877] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f00fc000 ctrl_size=25c phy_base=f00fe500 phy_size=2b0
- [ 0.821891] dsi_panel_device_register: Using default BTA for ESD check
- [ 0.834413] mdss_register_panel: adding framebuffer device 1ac8000.qcom,mdss_dsi
- [ 0.836691] mdss_dsi_status_init: DSI status check interval:5000
- [ 0.838241] mdp3_alloc: allocating 12582912 bytes at c3000000 (83000000 phys) for fb 0
- [ 0.838711] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
- [ 0.838721] mdp3_ctrl_init: mdp3_ctrl_init
- [ 0.838833] mdp3 1a00000.qcom,mdss_mdp: Unbalanced pm_runtime_enable!
- [ 0.841794] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
- [ 0.844361] msm_rpm_log_probe: OK
- [ 0.848617] NET: Registered protocol family 27
- [ 0.853924] In memshare_probe, Memshare probe success
- [ 0.856442] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
- [ 0.856469] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
- [ 0.858395] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
- [ 0.858605] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
- [ 0.859962] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
- [ 0.860006] AXI: get_pdata(): Error: Client name not found
- [ 0.860014] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
- [ 0.860021] msm_serial_hsl_probe: Bus scaling is disabled
- [ 0.860127] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 139) is a MSM
- [ 0.860188] msm_hsl_console_setup: console setup on port #0
- [ 3.035278] console [ttyHSL0] enabled
- [ 3.039255] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
- [ 3.044579] AXI: get_pdata(): Error: Client name not found
- [ 3.049965] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
- [ 3.059463] msm_serial_hsl_probe: Bus scaling is disabled
- [ 3.064949] 78b0000.serial: ttyHSL1 at MMIO 0x78b0000 (irq = 140) is a MSM
- [ 3.072195] msm_serial_hsl_init: driver initialized
- [ 3.090632] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
- [ 3.108745] brd: module loaded
- [ 3.115172] loop: module loaded
- [ 3.118106] apds993x 1-0039: Unable to read cross_talk use default 100
- [ 3.263899] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0x5 (ok)
- [ 3.271559] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.286555] apds993x 1-0039: Neither APDS993x nor APDS990x
- [ 3.291955] apds993x 1-0039: Not a valid chip ID
- [ 3.297419] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
- [ 3.302845] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
- [ 3.308555] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
- [ 3.318431] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0[ 3.325147] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
- [ 3.332352] QSEECOM: qseecom_probe: secure app region addr=0x87a00000 size=0x200000
- [ 3.342265] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 3.348236] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 3.355055] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- [ 3.361810] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- [ 3.368933] i2c-core: driver [tasha-i2c-core] using legacy suspend method
- [ 3.375526] i2c-core: driver [tasha-i2c-core] using legacy resume method
- [ 3.383137] SCSI Media Changer driver v0.25
- [ 3.390101] tun: Universal TUN/TAP device driver, 1.6
- [ 3.394223] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 3.403284] PPP generic driver version 2.4.2
- [ 3.406732] PPP BSD Compression module registered
- [ 3.411200] PPP Deflate Compression module registered
- [ 3.416290] PPP MPPE Compression module registered
- [ 3.421010] NET: Registered protocol family 24
- [ 3.426583] wcnss_wlan probed in built-in mode
- [ 3.434068] usbcore: registered new interface driver asix
- [ 3.438507] usbcore: registered new interface driver ax88179_178a
- [ 3.444626] usbcore: registered new interface driver cdc_ether
- [ 3.450369] usbcore: registered new interface driver net1080
- [ 3.456060] usbcore: registered new interface driver cdc_subset
- [ 3.461914] usbcore: registered new interface driver zaurus
- [ 3.467852] usbcore: registered new interface driver cdc_ncm
- [ 3.473805] msm_sharedmem: sharedmem_register_qmi: qmi init successful
- [ 3.480148] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
- [ 3.487311] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
- [ 3.494987] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
- [ 3.503082] msm_otg 78d9000.usb: msm_otg probe
- [ 3.511001] msm_otg 78d9000.usb: OTG regs = f01f4000
- [ 3.517851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.523339] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 3.529615] ehci-msm2: Qualcomm EHCI Host Controller
- [ 3.534492] usbcore: registered new interface driver cdc_acm
- [ 3.539482] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 3.547600] usbcore: registered new interface driver ccid_bridge
- [ 3.553690] ccid_bridge_init: success
- [ 3.557178] usbcore: registered new interface driver usb-storage
- [ 3.563137] usbcore: registered new interface driver ums-alauda
- [ 3.569087] usbcore: registered new interface driver ums-cypress
- [ 3.575067] usbcore: registered new interface driver ums-datafab
- [ 3.581018] usbcore: registered new interface driver ums-freecom
- [ 3.587049] usbcore: registered new interface driver ums-isd200
- [ 3.592910] usbcore: registered new interface driver ums-jumpshot
- [ 3.599054] usbcore: registered new interface driver ums-karma
- [ 3.604845] usbcore: registered new interface driver ums-onetouch
- [ 3.610878] usbcore: registered new interface driver ums-sddr09
- [ 3.616822] usbcore: registered new interface driver ums-sddr55
- [ 3.622683] usbcore: registered new interface driver ums-usbat
- [ 3.628667] usbcore: registered new interface driver usbserial
- [ 3.634389] usbcore: registered new interface driver qc_csvt
- [ 3.639957] usbserial: USB Serial support registered for qc_csvt
- [ 3.646028] usbcore: registered new interface driver usb_ehset_test
- [ 3.654463] msm_otg 78d9000.usb: phy_reset: success
- [ 3.655089] mousedev: PS/2 mouse device common for all mice
- [ 3.655300] usbcore: registered new interface driver xpad
- [ 3.657035] Goodix-TS 5-005d: Regulator get failed avdd ret=-19
- [ 3.657047] Goodix-TS 5-005d: Regulator get failed vdd ret=-19
- [ 3.657803] Goodix-TS 5-005d: Can not lookup pmx_ts_release pinstate -19
- [ 3.773952] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x8 (ok)
- [ 3.781286] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.796965] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.812454] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.828163] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.843930] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.859435] Goodix-TS 5-005d: init external watchdog failed!
- [ 3.865225] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.880791] Goodix-TS 5-005d: I2C retry: 1
- [ 3.885012] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.900580] Goodix-TS 5-005d: I2C retry: 2
- [ 3.904803] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.920372] Goodix-TS 5-005d: I2C retry: 3
- [ 3.924594] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.940164] Goodix-TS 5-005d: I2C retry: 4
- [ 3.944386] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.959956] Goodix-TS 5-005d: I2C retry: 5
- [ 3.964024] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 3.969979] Goodix-TS 5-005d: GTP i2c test failed time 4.
- [ 4.003624] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.018361] Goodix-TS 5-005d: I2C retry: 1
- [ 4.022547] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.038187] Goodix-TS 5-005d: I2C retry: 2
- [ 4.042338] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.057942] Goodix-TS 5-005d: I2C retry: 3
- [ 4.062130] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.077735] Goodix-TS 5-005d: I2C retry: 4
- [ 4.081922] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.097526] Goodix-TS 5-005d: I2C retry: 5
- [ 4.101560] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.107620] Goodix-TS 5-005d: GTP i2c test failed time 3.
- [ 4.133623] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.148355] Goodix-TS 5-005d: I2C retry: 1
- [ 4.152543] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.168149] Goodix-TS 5-005d: I2C retry: 2
- [ 4.172336] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.187940] Goodix-TS 5-005d: I2C retry: 3
- [ 4.192127] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.207731] Goodix-TS 5-005d: I2C retry: 4
- [ 4.211918] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.227524] Goodix-TS 5-005d: I2C retry: 5
- [ 4.231557] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.237584] Goodix-TS 5-005d: GTP i2c test failed time 2.
- [ 4.263620] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.278354] Goodix-TS 5-005d: I2C retry: 1
- [ 4.282543] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.298151] Goodix-TS 5-005d: I2C retry: 2
- [ 4.302333] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.317937] Goodix-TS 5-005d: I2C retry: 3
- [ 4.322125] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.337728] Goodix-TS 5-005d: I2C retry: 4
- [ 4.341917] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.357521] Goodix-TS 5-005d: I2C retry: 5
- [ 4.361555] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.367581] Goodix-TS 5-005d: GTP i2c test failed time 1.
- [ 4.393620] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.408354] Goodix-TS 5-005d: I2C retry: 1
- [ 4.412541] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.428145] Goodix-TS 5-005d: I2C retry: 2
- [ 4.432333] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.447937] Goodix-TS 5-005d: I2C retry: 3
- [ 4.452125] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.467730] Goodix-TS 5-005d: I2C retry: 4
- [ 4.471918] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.487522] Goodix-TS 5-005d: I2C retry: 5
- [ 4.491555] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.497577] Goodix-TS 5-005d: GTP i2c test failed time 0.
- [ 4.523466] Goodix-TS 5-005d: I2C communication ERROR!
- [ 4.527723] Goodix-TS: probe of 5-005d failed with error -107
- [ 4.533922] <<GTP-INF>>[gt1x_ts_probe:626] GTP Driver Version: V1.4<2015/07/10>
- [ 4.540583] <<GTP-INF>>[gt1x_ts_probe:627] GTP I2C Address: 0x14
- [ 4.546688] <<GTP-ERR>>[gt1x_parse_dt:331] regulator get of vdd_ana failed
- [ 4.553934] Goodix-TP 5-0014: Can not lookup pmx_ts_release pinstate -19
- [ 4.560137] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 4.683636] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 4.698372] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 4.704784] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 4.710388] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 4.833623] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 4.848355] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 4.854769] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 4.860375] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 4.983620] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 4.998347] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 5.004769] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 5.010372] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 5.133627] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 5.148360] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 5.154775] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 5.160378] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 5.283624] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 5.298358] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 5.304769] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 5.310376] <<GTP-ERR>>[gt1x_init:2379] Init failed, use default setting
- [ 5.317253] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:4 tx:2) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.332817] <<GTP-ERR>>[_do_i2c_read:391] I2c Transfer error! (-107)
- [ 5.339145] <<GTP-ERR>>[gt1x_get_chip_type:922] I2c communication error.
- [ 5.345826] <<GTP-ERR>>[gt1x_init:2389] Get chip type failed!
- [ 5.351532] <<GTP-ERR>>[gt1x_ts_probe:664] gt1x_init() failed.
- [ 5.357421] Goodix-TP: probe of 5-0014 failed with error -1
- [ 5.384211] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x30 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.398968] mmc3416x 1-0030: read reg 6 failed.(-107)
- [ 5.403973] mmc3416x 1-0030: Check device failed
- [ 5.408707] mmc3416x: probe of 1-0030 failed with error -107
- [ 5.414368] stk3x1x_probe: driver version = 3.4.4ts
- [ 5.419107] stk_ps 1-0048: stk3x1x_probe: stk3x1x_parse_dt ret=0
- [ 5.425347] input: stk3x1x-ls as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input0
- [ 5.433181] input: proximity as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input1
- [ 5.442600] mpu6050 1-0068: Regulator get failed vi2c ret=-19
- [ 5.553669] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x68 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.568425] mpu6050 1-0068: Fail to read power mode, ret=-107
- [ 5.574125] mpu6050 1-0068: Cannot get invalid chip type
- [ 5.579521] mpu6050 1-0068: Probe device return error-107
- [ 5.584861] mpu6050: probe of 1-0068 failed with error -107
- [ 5.590374] AKM compass driver: initialize.
- [ 5.683639] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000090
- [ 5.698305] akm8963 1-000c: akm_i2c_txdata: transfer failed.
- [ 5.703952] akm8963 1-000c: AKECS_Set_PowerDown: Can not set to powerdown mode.
- [ 5.711346] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.726858] akm8963 1-000c: akm_i2c_rxdata: transfer failed.
- [ 5.732567] akm8963: probe of 1-000c failed with error -107
- [ 5.738124] AKM compass driver: initialize.
- [ 5.742231] i2c-core: driver [bma2x2-accel] using legacy suspend method
- [ 5.748799] i2c-core: driver [bma2x2-accel] using legacy resume method
- [ 5.755437] i2c-core: driver [bmi160] using legacy suspend method
- [ 5.761346] i2c-core: driver [bmi160] using legacy resume method
- [ 5.768374] qcom,qpnp-rtc qpnp-rtc-6: rtc core: registered qpnp_rtc as rtc0
- [ 5.774689] i2c /dev entries driver
- [ 5.782209] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
- [ 5.792430] msm_actuator_i2c_probe:1313 msm_actuator_i2c_probe: succeeded
- [ 5.798835] LED trigger flashlight-trigger failed to register (-17)
- [ 5.805604] adp1660 i2c_add_driver success
- [ 5.808911] msm_flash_init_module:1114 Enter
- [ 5.813352] msm_flash_lm3642_init entry
- [ 5.817946] msm_eeprom_parse_memory_map: pageen not needed
- [ 5.822403] msm_eeprom_parse_memory_map: pageen not needed
- [ 5.827962] msm_eeprom_parse_memory_map: pageen not needed
- [ 5.864664] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok)
- [ 5.871926] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x36 MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 5.903465] read_eeprom_memory: page write failed
- [ 5.907127] msm_eeprom_i2c_probe read_eeprom_memory failed
- [ 5.943511] msm_eeprom_i2c_probe failed! rc = -107
- [ 5.947271] msm_eeprom: probe of 3-006c failed with error -107
- [ 5.955330] g_sctrl[0] ed8c2800
- [ 5.957609] msm_camera_get_dt_gpio_req_tbl gpio req tbl index 2 invalid
- [ 5.964085] failed
- [ 5.965849] failed: msm_sensor_driver_get_gpio_data rc -22failed: rc -22
- [ 5.972534] failed: msm_sensor_driver_parse rc -22[ 5.977432] camera: probe of 3-0001 failed with error -22
- [ 5.982740] gc0310_init_module:487
- [ 5.990049] BMS: bms_get_adc: vadc not found - defer probe rc=-517
- [ 5.995244] BMS: qpnp_vm_bms_probe: Failed to get adc rc=-517
- [ 6.000937] spmi qpnp-vm-bms-10: Driver qcom,qpnp-vm-bms requests probe deferral
- [ 6.008592] CHG: qpnp_lbc_main_probe: Failed to read DT properties rc=-517
- [ 6.015211] spmi qpnp-linear-charger-8: Driver qcom,qpnp-linear-charger requests probe deferral
- [ 6.024565] unable to find DT imem DLOAD mode node
- [ 6.028914] unable to find DT imem EDLOAD mode node
- [ 6.035004] qpnp_vadc_get_temp: VADC read error with -517
- [ 6.039365] thermal thermal_zone0: failed to read out thermal zone 0
- [ 6.046044] qpnp_vadc_get_temp: VADC read error with -517
- [ 6.051084] thermal thermal_zone1: failed to read out thermal zone 1
- [ 6.057688] qpnp_vadc_get_temp: VADC read error with -517
- [ 6.062803] thermal thermal_zone2: failed to read out thermal zone 2
- [ 6.088333] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 6.096072] device-mapper: req-crypt: dm-req-crypt successfully initalized.
- [ 6.096072]
- [ 6.104512] cpuidle: using governor ladder
- [ 6.108231] cpuidle: using governor menu
- [ 6.112224] sdhci: Secure Digital Host Controller Interface driver
- [ 6.118380] sdhci: Copyright(c) Pierre Ossman
- [ 6.122638] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 6.135614] sdhci_msm 7824900.sdhci: host_use_default_qos = 1
- [ 6.140325] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
- [ 6.148966] sdhci_msm 7824900.sdhci: dma_latency = 2
- [ 6.153983] sdhci_msm 7824900.sdhci: dma_latency = 241
- [ 6.159158] sdhci_msm 7824900.sdhci: dma_latency = 501
- [ 6.164402] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
- [ 6.173772] sdhci_msm 7824900.sdhci: dma_latency = 200
- [ 6.178951] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
- [ 6.188358] sdhci_msm 7824900.sdhci: dma_latency = 200
- [ 6.193562] sdhci_msm 7824900.sdhci: Host using default pm_qos
- [ 6.200596] mmc0: no vqmmc regulator found
- [ 6.203702] mmc0: no vmmc regulator found
- [ 6.237118] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
- [ 6.251411] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
- [ 6.256175] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
- [ 6.264746] sdhci_msm 7864900.sdhci: dma_latency = 2
- [ 6.269748] sdhci_msm 7864900.sdhci: dma_latency = 241
- [ 6.274990] sdhci_msm 7864900.sdhci: dma_latency = 501
- [ 6.280316] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
- [ 6.289716] sdhci_msm 7864900.sdhci: dma_latency = 200
- [ 6.294808] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
- [ 6.304298] sdhci_msm 7864900.sdhci: dma_latency = 200
- [ 6.309474] sdhci_msm 7864900.sdhci: Host using default pm_qos
- [ 6.317136] mmc1: no vqmmc regulator found
- [ 6.320344] mmc1: no vmmc regulator found
- [ 6.356729] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
- [ 6.364131] qcom,leds-qpnp: probe of leds-qpnp-7 failed with error -10
- [ 6.377104] mmc0: BKOPS_EN bit = 0
- [ 6.388945] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
- [ 6.394956] qce 720000.qcedev: CE device = 0x0
- [ 6.394956] , IO base, CE = 0xf0680000
- [ 6.394956] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- [ 6.394956] IO base BAM = 0x (null)
- [ 6.394956] BAM IRQ 239
- [ 6.394956] Engines Availability = 0x2010853
- [ 6.419010] sps:BAM 0x00704000 is registered.
- [ 6.427761] mmc0: new HS200 MMC card at address 0001
- [ 6.428919] sps:BAM 0x00704000 (va:0xf06c0000) enabled: ver:0x25, number of pipes:8
- [ 6.440366] mmcblk0: mmc0:0001 HAG4a2 14.6 GiB
- [ 6.444435] mmcblk0rpmb: mmc0:0001 HAG4a2 partition 3 4.00 MiB
- [ 6.445287] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
- [ 6.445974] qcedev: FIPS140-2 Known Answer Tests : Skipped
- [ 6.464586] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
- [ 6.470960] qcrypto 720000.qcrypto: CE device = 0x0
- [ 6.470960] , IO base, CE = 0xf07c0000
- [ 6.470960] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
- [ 6.470960] IO base BAM = 0x (null)
- [ 6.470960] BAM IRQ 239
- [ 6.470960] Engines Availability = 0x2010853
- [ 6.473713] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
- [ 6.519897] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
- [ 6.527588] qcrypto 720000.qcrypto: qcrypto-ecb-aes
- [ 6.531686] qcrypto 720000.qcrypto: qcrypto-cbc-aes
- [ 6.536609] qcrypto 720000.qcrypto: qcrypto-ctr-aes
- [ 6.541372] qcrypto 720000.qcrypto: qcrypto-ecb-des
- [ 6.546272] qcrypto 720000.qcrypto: qcrypto-cbc-des
- [ 6.551091] qcrypto 720000.qcrypto: qcrypto-ecb-3des
- [ 6.556069] qcrypto 720000.qcrypto: qcrypto-cbc-3des
- [ 6.561077] qcrypto 720000.qcrypto: qcrypto-xts-aes
- [ 6.566075] qcrypto 720000.qcrypto: qcrypto-sha1
- [ 6.570586] qcrypto 720000.qcrypto: qcrypto-sha256
- [ 6.575317] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
- [ 6.581405] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
- [ 6.587615] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
- [ 6.593987] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
- [ 6.600187] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
- [ 6.606566] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
- [ 6.612914] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
- [ 6.618019] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
- [ 6.623136] qcrypto 720000.qcrypto: qcrypto-aes-ccm
- [ 6.628128] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
- [ 6.633362] qcrypto: FIPS140-2 Known Answer Tests: Skipped
- [ 6.639931] usbcore: registered new interface driver usbhid
- [ 6.644509] usbhid: USB HID core driver
- [ 6.648945] zram: Created 1 device(s) ...
- [ 6.653041] ashmem: initialized
- [ 6.656636] logger: created 256K log 'log_main'
- [ 6.661372] logger: created 256K log 'log_events'
- [ 6.666291] logger: created 256K log 'log_radio'
- [ 6.670932] logger: created 256K log 'log_system'
- [ 6.675797] sps:BAM 0x078c4000 is registered.
- [ 6.679396] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
- [ 6.689718] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 6.702023] input: qpnp_pon as /devices/virtual/input/input2
- [ 6.709440] PMIC@SID0: PM8909 v1.1 options: 0, 2, 0, 0
- [ 6.731606] populate_opp_table: clock-a7: OPP tables populated (cpu 3)
- [ 6.737195] print_opp_table: clock_cpu: a7: OPP voltage for 400000000: 4
- [ 6.743844] print_opp_table: clock_cpu: a7: OPP voltage for 1094400000: 7
- [ 6.752623] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
- [ 6.758877] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
- [ 6.768639] devfreq qcom,cpubw.32: Couldn't update frequency transition information.
- [ 6.780334] coresight-fuse 5e01c.fuse: Fuse initialized
- [ 6.780394] mmc1: new ultra high speed SDR25 SDHC card at address e624
- [ 6.791169] mmcblk1: mmc1:e624 SS16G 14.8 GiB
- [ 6.791978] coresight-cti 810000.cti: CTI initialized
- [ 6.792235] coresight-cti 811000.cti: CTI initialized
- [ 6.792476] coresight-cti 812000.cti: CTI initialized
- [ 6.792691] coresight-cti 813000.cti: CTI initialized
- [ 6.792929] coresight-cti 814000.cti: CTI initialized
- [ 6.793167] coresight-cti 815000.cti: CTI initialized
- [ 6.793609] coresight-cti 816000.cti: CTI initialized
- [ 6.793867] coresight-cti 817000.cti: CTI initialized
- [ 6.794109] coresight-cti 818000.cti: CTI initialized
- [ 6.794341] coresight-cti 851000.cti: CTI initialized
- [ 6.794645] coresight-cti 852000.cti: CTI initialized
- [ 6.794904] coresight-cti 853000.cti: CTI initialized
- [ 6.795143] coresight-cti 854000.cti: CTI initialized
- [ 6.795392] coresight-cti 83c000.cti: CTI initialized
- [ 6.795637] coresight-cti 838000.cti: CTI initialized
- [ 6.795856] coresight-cti 835000.cti: CTI initialized
- [ 6.796101] coresight-cti 830000.cti: CTI initialized
- [ 6.796786] coresight-csr 801000.csr: CSR initialized
- [ 6.797447] coresight-tmc 826000.tmc: Byte Counter feature enabled
- [ 6.797750] sps:BAM 0x00884000 is registered.
- [ 6.797751] coresight-tmc 826000.tmc: TMC initialized
- [ 6.798157] coresight-tmc 825000.tmc: TMC initialized
- [ 6.800668] nidnt boot config: 0
- [ 6.802130] coresight-tpiu 820000.tpiu: NIDnT on SDCARD only mode
- [ 6.802297] coresight-tpiu 820000.tpiu: TPIU initialized
- [ 6.803059] coresight-funnel 821000.funnel: FUNNEL initialized
- [ 6.803250] coresight-funnel 869000.funnel: FUNNEL initialized
- [ 6.803413] coresight-funnel 868000.funnel: FUNNEL initialized
- [ 6.803717] coresight-funnel 855000.funnel: FUNNEL initialized
- [ 6.804307] coresight-replicator 824000.replicator: REPLICATOR initialized
- [ 6.804983] coresight-dbgui 86d000.dbgui: DebugUI capture enabled
- [ 6.805160] coresight-dbgui 86d000.dbgui: DebugUI initializaed
- [ 6.805890] coresight-stm 802000.stm: STM initialized
- [ 6.806476] coresight-hwevent 86c000.hwevent: Hardware Event driver initialized
- [ 6.975982] coresight-etm 84c000.etm: ETM initialized
- [ 6.981110] coresight-etm 84d000.etm: ETM initialized
- [ 6.986180] coresight-etm 84e000.etm: ETM initialized
- [ 6.990431] mmcblk1: p1
- [ 6.993839] coresight-etm 84f000.etm: ETM initialized
- [ 6.999494] coresight-modem-etm modem_etm0.26: Modem ETM initialized
- [ 7.005950] coresight-wcn-etm wcn_etm0.25: Wireless ETM initialized
- [ 7.012161] coresight-rpm-etm rpm_etm0.24: RPM ETM initialized
- [ 7.017899] coresight-qpdi 1941000.qpdi: CoreSight QPDI driver initialized
- [ 7.024580] usbcore: registered new interface driver snd-usb-audio
- [ 7.031332] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.039081] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.061841] msm-pcm-lpa qcom,msm-pcm-lpa.46: msm_pcm_probe: dev name qcom,msm-pcm-lpa.46
- [ 7.070003] platform qcom,msm-voip-dsp.48: Driver msm-voip-dsp requests probe deferral
- [ 7.077516] platform qcom,msm-pcm-voice.49: Driver msm-pcm-voice requests probe deferral
- [ 7.093688] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.100541] msm8x16-asoc-wcd sound.71: ASoC: platform (null) not registered
- [ 7.106576] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.113492] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.120996] u32 classifier
- [ 7.123215] Actions configured
- [ 7.126723] Netfilter messages via NETLINK v0.30.
- [ 7.131398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 7.138349] ctnetlink v0.93: registering with nfnetlink.
- [ 7.143304] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 7.149672] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 7.156161] xt_time: kernel timezone is -0000
- [ 7.160135] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.165381] arp_tables: (C) 2002 David S. Miller
- [ 7.169750] TCP: cubic registered
- [ 7.172955] Initializing XFRM netlink socket
- [ 7.178263] NET: Registered protocol family 10
- [ 7.182867] mip6: Mobile IPv6
- [ 7.184930] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.190447] sit: IPv6 over IPv4 tunneling driver
- [ 7.195615] NET: Registered protocol family 17
- [ 7.199236] NET: Registered protocol family 15
- [ 7.203816] Bridge firewalling registered
- [ 7.207635] Ebtables v2.0 registered
- [ 7.211634] Bluetooth: ee855ef0
- [ 7.214216] Bluetooth: ee855ef0Bluetooth: ee855f00
- [ 7.218910] Bluetooth: ee855ed8Bluetooth: ee855ed8
- [ 7.223789] Bluetooth: ee855ed0Bluetooth: ee855f10
- [ 7.228469] Bluetooth: ee855f10[ 7.231624] l2tp_core: L2TP core driver, V2.0
- [ 7.235982] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 7.240697] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
- [ 7.246330] l2tp_netlink: L2TP netlink interface
- [ 7.250899] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
- [ 7.256866] l2tp_debugfs: L2TP debugfs support
- [ 7.261183] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
- [ 7.279691] of_batterydata_read_data: palladium_1500mah loaded
- [ 7.296418] BMS: bms_load_hw_defaults: BMS_EN=1 Sample_Interval-S1=[100]S2=[70] Sample_Count-S1=[256]S2=[128] Fifo_Length-S1=[5]S2=[5] FSM_state=2
- [ 7.316234] BMS: calculate_initial_soc: warm_reset=0 est_ocv=0 shutdown_soc_invalid=0 shutdown_ocv=4137000 shutdown_soc=97 last_soc=97 calculated_soc=97 last_ocv_uv=4137000
- [ 7.344939] BMS: qpnp_vm_bms_probe: probe success: soc=97 vbatt=4054567 ocv=4137000 warm_reset=0
- [ 7.521810] CHG: qpnp_lbc_main_probe: Probe chg_dis=0 bpd=1 usb=1 batt_pres=1 batt_volt=4054253 soc=97
- [ 7.530229] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.537820] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.558198] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.565317] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.571022] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.578090] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.585181] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.592743] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.601227] Registering SWP/SWPB emulation handler
- [ 7.606387] Loading module verification certificates
- [ 7.617443] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0c72b4353433056b2cc9d98393df985ebf3803cb'
- [ 7.757409] oem_otg_ext_vreg: disabling
- [ 7.760213] spk_vreg: disabling
- [ 7.763372] regulator-dummy: disabling
- [ 7.767946] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.775204] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.780912] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.788056] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.795106] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.802632] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.812137] file system registered
- [ 7.814633] mbim_init: initialize 1 instances
- [ 7.818935] mbim_init: Initialized 1 ports
- [ 7.822917] mbim_bam_setup: no_ports:1
- [ 7.826927] mbim_bam_setup: Initialized 1 ports
- [ 7.833094] rndis_qc_init: initialize rndis QC instance
- [ 7.838115] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 7.844178] android_usb gadget: Number of LUNs=1
- [ 7.848740] lun0: LUN: removable file: (no medium)
- [ 7.854270] android_usb gadget: android_usb ready
- [ 7.858290] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
- [ 7.864294] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
- [ 7.871876] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.873908] input: gpio-keys as /devices/soc.0/gpio_keys.70/input/input3
- [ 7.883530] qcom,qpnp-rtc qpnp-rtc-6: setting system clock to 1970-01-01 00:11:15 UTC (675)
- [ 7.885819] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.885868] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.886021] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.886143] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.886209] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.886909] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.889015] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.889057] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.889188] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.955966] msm_thermal:interrupt_mode_init Interrupt mode init
- [ 7.962692] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.963488] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
- [ 7.977763] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.986103] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.993338] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.999181] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 8.002458] led_gpio_flash_probe:probe successfully!
- [ 8.006877] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully
- [ 8.007652] ---+++ get pwm-freq prop failed
- [ 8.007655] ---+++ get pwm-duty prop failed
- [ 8.007779] ---+++ gpio_clk_probe succeeded
- [ 8.008168] clock_late_init: Removing enables held for handed-off clocks
- [ 8.011058] ALSA device list:
- [ 8.011061] No soundcards`+�r��������platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 8.050959] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 8.051429] Freeing unused kernel memory: 396K (c1100000 - c1163000)
- [ 8.065016] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 8.073218] msm8x16-asoc-wcd sound.71: default codec configured
- [ 8.080550] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 8.086335] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 8.093203] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 8.113982] init: init first stage started!
- [ 8.245821] type=1403 audit(675.859:2): policy loaded auid=4294967295 ses=4294967295
- [ 8.254022] type=1404 audit(675.869:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- [ 8.373860] init: (Initializing SELinux enforcing took 0.26s.)
- [ 8.388385] init: init second stage started!
- [ 8.405183] init: property_set("ro.boot.bootdevice", "7824900.sdhci") failed
- [ 8.419637] init: Running restorecon...
- [ 8.725642] init: waitpid failed: No child processes
- [ 8.730292] init: (Loading properties from /default.prop took 0.00s.)
- [ 8.741130] init: /init.rc: 679: invalid keyword 'setprop'
- [ 8.745769] init: /init.rc: 680: invalid keyword 'chmod'
- [ 8.750902] init: /init.rc: 681: invalid keyword 'chown'
- [ 8.756492] init: (Parsing /init.environ.rc took 0.00s.)
- [ 8.762754] init: (Parsing /init.usb.rc took 0.00s.)
- [ 8.771974] init: /init.qcom.rc: 582: user requires 1 argument
- [ 8.779780] init: ignored duplicate definition of service 'RIDL'init: (Parsing init.qcom.usb.rc took 0.01s.)
- [ 8.802248] init: ignored duplicate definition of service 'perfd'init: init.target.rc: 151: invalid keyword 'load_all_props'
- [ 8.813621] init: ignored duplicate definition of service 'poweroffhandler'init: (Parsing init.carrier.rc took 0.01s.)
- [ 8.823300] init: (Parsing init.target.rc took 0.02s.)
- [ 8.830396] init: (Parsing init.qcom.factory.rc took 0.00s.)
- [ 8.835101] init: (Parsing /init.qcom.rc took 0.07s.)
- [ 8.842730] init: (Parsing /init.usb.configfs.rc took 0.00s.)
- [ 8.847709] init: (Parsing /init.zygote32.rc took 0.00s.)
- [ 8.852841] init: (Parsing /init.rc took 0.12s.)
- [ 8.858688] init: Starting service 'ueventd'...
- [ 8.864802] init: Waiting for /dev/.coldboot_done...
- [ 8.869048] ueventd: ueventd started!
- [ 9.923110] ueventd: Coldboot took 1.04s.
- [ 9.924522] init: Waiting for /dev/.coldboot_done too[ 9.946921] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
- [ 9.968361] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
- [ 10.079633] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 10.087266] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
- [ 10.097323] EXT4-fs (mmcblk0p33): Ignoring removed nomblk_io_submit option
- [ 10.110169] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
- [ 10.120011] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
- [ 10.130649] fs_mgr: check_fs(): unmount(/data) succeeded
- [ 10.136556] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
- [ 11.025430] e2fsck (238) used greatest stack depth: 5444 bytes left
- [ 11.031167] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- [ 11.031167]
- [ 11.036864] e2fsck: Pass 1: Checking inodes, blocks, and sizes
- [ 11.036864]
- [ 11.044045] e2fsck: Pass 2: Checking directory structure
- [ 11.044045]
- [ 11.050722] e2fsck: Pass 3: Checking directory connectivity
- [ 11.050722]
- [ 11.057816] e2fsck: Pass 4: Checking reference counts
- [ 11.057816]
- [ 11.064336] e2fsck: Pass 5: Checking group summary information
- [ 11.064336]
- [ 11.071556] e2fsck: data: 3596/316992 files (9.0% non-contiguous), 107588/1267451 blocks
- [ 11.071556]
- [ 11.087063] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard
- [ 11.096851] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
- [ 11.110700] init (232) used greatest stack depth: 5224 bytes left
- [ 11.125574] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
- [ 11.131421] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
- [ 11.138142] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
- [ 11.144562] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
- [ 11.150665] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
- [ 11.157558] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
- [ 11.163774] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
- [ 11.170451] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
- [ 11.176696] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
- [ 11.183203] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
- [ 11.189730] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
- [ 11.196081] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
- [ 11.202257] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
- [ 11.209027] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
- [ 11.215029] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
- [ 11.220878] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
- [ 11.227025] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
- [ 11.233376] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
- [ 11.240333] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
- [ 11.247211] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
- [ 11.253792] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
- [ 11.259725] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
- [ 11.265773] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
- [ 11.272070] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
- [ 11.278398] init: (Parsing /system/etc/init/rild.rc took 0.00s.)
- [ 11.284466] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
- [ 11.291105] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
- [ 11.298122] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
- [ 11.304529] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
- [ 11.310211] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
- [ 11.323305] EXT4-fs (mmcblk0p23): warning: maximal mount count reached, running e2fsck is recommended
- [ 11.332173] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 11.347151] EXT4-fs (mmcblk0p22): warning: maximal mount count reached, running e2fsck is recommended
- [ 11.356009] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 11.374880] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem
- [ 11.382614] init: Starting service 'logd'...
- [ 11.440977] logd.auditd: start
- [ 11.443035] logd.klogd: 11439592651
- [ 12.210112] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
- [ 12.218741] init: (Loading properties from /persist/speccfg/vendor_ro.prop took 0.01s.)
- [ 12.230029] init: (Loading properties from /system/vendor/vendor.prop took 0.00s.)
- [ 12.237799] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
- [ 12.246413] init: (Loading properties from /persist/speccfg/vendor_persist.prop took 0.01s.)
- [ 12.255779] init: property_set("ro.telephony.default_network", "22,20") failed
- [ 12.262092] init: (Loading properties from /system/vendor/default.prop took 0.01s.)
- [ 12.269814] init: (Loading properties from /system/vendor/power.prop took 0.00s.)
- [ 12.277197] init: (Loading properties from /system/build.prop took 0.07s.)
- [ 12.284175] init: (Loading properties from /vendor/build.prop took 0.00s.)
- [ 12.290832] init: (Loading properties from /factory/factory.prop took 0.00s.)
- [ 12.298268] init: /recovery not specified in fstab
- [ 12.303894] init: Starting service 'debuggerd'...
- [ 12.308649] init: do_start: Service debuggerd64 not found
- [ 12.316416] init: Starting service 'vold'...
- [ 12.323223] init: Not bootcharting.
- [ 12.606804] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
- [ 12.647605] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 263) exited with status 0
- [ 12.716891] init: Starting service 'carrier_switcher'...
- [ 12.724141] init: (Loading properties from /data/local.prop took 0.00s.)
- [ 12.896921] init: Starting service 'logd-reinit'...
- [ 12.902505] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
- [ 12.912918] init: write: cannot expand '${persist.sys.ssr.enable_debug}'
- [ 12.919325] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
- [ 12.930228] init: write: cannot expand '${persist.sys.mba_boot_timeout}'
- [ 12.936991] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
- [ 12.937272] logd.daemon: reinit
- [ 12.951489] init: write: cannot expand '${persist.sys.modem_auth_timeout}'
- [ 12.958449] init: Service 'logd-reinit' (pid 267) exited with status 0
- [ 12.964805] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
- [ 12.975796] init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
- [ 12.985654] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x88000000 to 0x8d300000
- [ 13.011241] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xaf400000 to 0xaf500000
- [ 13.064375] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
- [ 13.831765] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
- [ 13.908839] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
- [ 13.916579] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
- [ 13.916583] memshare: Modem Restart has happened
- [ 13.917038] init: Service 'carrier_switcher' (pid 264) exited with status 0
- [ 13.917494] init: Starting service 'exec 2 (/init.qcom.early_boot.sh)'...
- [ 13.944161] M-Notify: General: 7
- [ 13.945573] msm8x16-asoc-wcd sound.71: default codec configured
- [ 13.954767] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
- [ 13.966042] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
- [ 13.978215] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
- [ 13.990309] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
- [ 14.006775] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
- [ 14.018625] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
- [ 14.025343] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
- [ 14.074708] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: mux SLIM_0_RX AANC MUX has no paths
- [ 14.102890] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX3 MIX1 INP3 has no paths
- [ 14.110077] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX2 MIX1 INP3 has no paths
- [ 14.172229] init: property_set("ro.opengles.version", "196608") failed
- [ 14.736780] init: Service 'exec 2 (/init.qcom.early_boot.sh)' (pid 288) exited with status 0
- [ 14.749892] init: Starting service 'healthd'...
- [ 14.755298] init: Starting service 'qcom-debug'...
- [ 14.760610] binder: 324:324 transaction failed 29189, size 0-0
- [ 14.760761] init: Starting service 'qcom-c_core-sh'...
- [ 14.762452] init: Starting service 'config_bluetooth'...
- [ 14.764625] init: Starting service 'qseecomd'...
- [ 14.766592] init: Starting service 'per_mgr'...
- [ 14.768580] init: Starting service 'lmkd'...
- [ 14.770737] init: Starting service 'servicemanager'...
- [ 14.772882] init: Starting service 'surfaceflinger'...
- [ 14.788574] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
- [ 14.788644] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
- [ 14.788711] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
- [ 14.788776] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
- [ 14.788839] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
- [ 14.788901] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
- [ 14.788964] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
- [ 14.789027] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
- [ 14.789091] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
- [ 14.789156] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
- [ 14.789219] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
- [ 14.789284] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
- [ 14.789348] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
- [ 14.789411] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
- [ 14.789474] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
- [ 14.789537] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
- [ 14.789606] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
- [ 14.789676] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
- [ 14.789741] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
- [ 14.789804] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
- [ 14.791050] init: Starting service 'rmt_storage'...
- [ 15.031376] init: insmod: open("/system/lib/modules/adsprpc.ko") failed: No such file or directoryinit: Starting service 'console'...
- �[ 15.064984] init: Starting service 'adbd'...y disabled
- [ 15.070575] init: Starting service 'ppd'...
- [ 15.094439] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 3 (/system/bin/update_verifier)'
- [ 15.110833] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
- [ 15.136281] init: Starting service 'qcomsysd'...
- [ 15.143393] init: Starting service 'qcom-c_main-sh'...
- [ 15.156261] init: Starting service 'cnd'...
- [ 15.176934] init: Starting service 'irsc_util'...
- [ 15.205016] init: Starting service 'tftp_server'...
- [ 15.211307] init: Starting service 'ptt_socket_app'...
- [ 15.225276] init: Starting service 'cnss_diag'...
- [ 15.245065] init: Starting service 'atfwd_quec'...
- msm8909:/ $ [ 15.251171] handle_qmi_request: Error getting req_desc for msg_id 36
- [ 15.251295] init: Starting service 'quecserver'...
- [ 15.252566] init: cannot find '/system/bin/usb_uicc_client' (No such file or directory), disabling 'usb_uicc_daemon'
- [ 15.253404] init: Starting service 'bms-sh'...
- [ 15.265761] init: Starting service 'qcom-usb-sh'...
- [ 15.267003] init: cannot find '/system/bin/qrngd' (No such file or directory), disabling 'qrngd'
- [ 15.267989] init: Starting service 'thermal-engine'...
- [ 15.270125] init: Starting service 'wcnss-service'...
- [ 15.272380] init: Starting service 'imsstarter'...
- [ 15.293779] init: cannot find '/system/bin/dts_configurator' (No such file or directory), disabling 'dts_configurator'
- [ 15.294797] init: Starting service 'zygote'...
- [ 15.296981] init: Starting service 'audioserver'...
- [ 15.299250] init: Starting service 'cameraserver'...
- [ 15.301427] init: Starting service 'drm'...
- [ 15.308622] init: couldn't write 376 to /dev/cpuset/camera-daemon/tasks: No such file or directory
- [ 15.323915] init: Starting service 'installd'...
- [ 15.326568] init: Starting service 'keystore'...
- [ 15.329121] init: Starting service 'mediacodec'...
- [ 15.331680] init: Starting service 'mediadrm'...
- [ 15.353104] init: Starting service 'mediaextractor'...
- [ 15.355719] init: Starting service 'media'...
- [ 15.358014] init: Starting service 'netd'...
- [ 15.360489] init: Starting service 'ril-daemon'...
- [ 15.364538] init: Starting service 'dpmd'...
- [ 15.366877] init: Starting service 'cnss-daemon'...
- [ 15.369180] init: Starting service 'loc_launcher'...
- [ 15.371333] init: Starting service 'qcom-sh'...
- [ 15.382340] init: Service fuse_uicc0 does not have a SELinux domain defined.
- [ 15.383225] init: Starting service 'RIDL'...
- [ 15.385855] init: Starting service 'fidodaemon'...
- [ 15.388201] init: Starting service 'qcamerasvr'...
- [ 15.390478] init: Starting service 'time_daemon'...
- [ 15.392722] init: Starting service 'audiod'...
- [ 15.397946] init: Starting service 'gatekeeperd'...
- [ 15.506283] mem_share_svc_recv_msg: Error receiving message
- [ 15.644354] gbam_connect_work: Bam channel is not ready
- [ 15.785458] init: Starting service 'perfprofd'...
- [ 15.790667] init: Service 'qcom-debug' (pid 325) exited with status 0
- [ 15.864027] init: Service 'qcom-c_core-sh' (pid 326) exited with status 0
- [ 16.024185] healthd: BatteryTechnologyPath not found
- [ 16.028221] healthd: BatteryFullChargePath not found
- [ 16.033174] healthd: BatteryCycleCountPath not found
- [ 16.210860] init: Service 'irsc_util' (pid 353) exited with status 0
- [ 16.247414] init: Service 'cnss_diag' (pid 364) exited with status 255
- [ 16.306099] init: Starting service 'qmuxd'...
- [ 16.352416] init: Service 'bms-sh' (pid 368) exited with status 0
- [ 16.364151] init: Service 'keystore' (pid 380) exited with status 1
- [ 16.370027] init: Service 'keystore' (pid 380) killing any children in process group
- [ 16.415522] init: Starting service 'vm_bms'...
- [ 16.422022] init: cannot find '/system/bin/ipacm-diag' (No such file or directory), disabling 'ipacm-diag'
- [ 16.554783] init: Starting service 'imsqmidaemon'...
- [ 16.594356] init: Service 'imsstarter' (pid 372) exited with status 0
- [ 16.686763] init: cannot find '/system/bin/ipacm' (No such file or directory), disabling 'ipacm'
- [ 16.834681] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
- [ 16.913091] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded
- [ 17.026527] init: Starting service 'imsdatadaemon'...
- [ 17.064854] devbw qcom,gpubw.23: Governor already resumed!
- [ 17.069323] devbw qcom,gpubw.23: Unable to resume BW HW mon governor (-16)
- [ 17.201061] init: Starting service 'ril-daemon2'...
- [ 17.523859] init: Starting service 'qti'...
- [ 17.647465] init: Service 'qcom-usb-sh' (pid 369) exited with status 0
- [ 17.746693] init: Starting service 'netmgrd'...
- [ 17.976126] init: Service 'qcom-c_main-sh' (pid 345) exited with status 0
- [ 18.338311] init: Starting service 'bootanim'...
- [ 19.226353] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
- [ 19.249856] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
- [ 19.267804] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
- [ 19.295198] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 19.301971] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 19.333806] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.339226] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
- [ 19.374983] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.380397] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
- [ 19.403736] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 19.410366] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 19.473725] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.479144] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
- [ 19.506682] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.512012] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
- [ 19.544368] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.549790] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
- [ 19.583633] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.589066] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
- [ 19.684612] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.689813] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.710586] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.717224] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.722243] msm_pcm_volume_ctl_get substream or runtime not found
- [ 19.754174] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.038987] init: Starting service 'keystore'...
- [ 20.085964] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
- [ 20.096773] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
- [ 20.124130] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
- [ 20.139487] msm_ds2_dap_set_security_control: dmid 0 license key 0
- [ 20.163578] core_set_license: Invalid cal block to send
- [ 20.167602] msm_ds2_dap_set_security_control: failed to set dolby license[ 20.184944] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
- [ 20.190266] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
- [ 20.234140] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
- [ 20.429311] cp (548) used greatest stack depth: 5208 bytes left
- [ 20.584721] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
- [ 20.605221] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
- [ 20.612987] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
- [ 20.633333] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 20.640191] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 20.648943] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.656649] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
- [ 20.673627] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.678958] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
- [ 20.715806] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 20.722289] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 20.754746] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.773615] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
- [ 20.779932] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.793529] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
- [ 20.799834] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.831346] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
- [ 20.853658] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.858989] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
- [ 20.907106] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.912186] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.938501] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.953839] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.958747] msm_pcm_volume_ctl_get substream or runtime not found
- [ 20.970537] msm_pcm_volume_ctl_get substream runtime not found
- [ 21.028834] init: Service 'qcom-sh' (pid 395) exited with status 0
- [ 21.231827] init: Service 'RIDL' (pid 396) exited with status 65
- [ 21.545887] failed: s_ctrl (null) for camera_id 1[ 21.549569] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -22
- [ 21.581312] msm_camera_fill_vreg_params:65 i 0 j 1 cam_vio
- [ 21.586158] msm_camera_fill_vreg_params:76 i 1 j 2 cam_vana
- [ 21.591409] msm_camera_fill_vreg_params:76 i 5 j 2 cam_vana
- [ 21.597083] msm_camera_fill_vreg_params:65 i 6 j 1 cam_vio
- [ 21.632191] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.647046] msm_sensor_match_id: hi843_8909: read id failed
- [ 21.652466] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.731428] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.746257] msm_sensor_match_id: hi843_8909: read id failed
- [ 21.751892] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.817990] configuring dma source while dma is active
- [ 21.832244] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.847068] msm_sensor_match_id: hi843_8909: read id failed
- [ 21.852946] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.903538] hi843_8909 power up failed
- [ 21.906288] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -107
- [ 21.931609] msm_isp_close_node: halt timeout rc=0
- [ 22.231426] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 22.237655] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 22.243639] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 22.249691] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 22.703800] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 22.709479] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 22.717024] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 22.722700] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 22.876707] Couldn't get snoc_qosgen
- [ 23.033858] init: property_set("ro.ril.svlte1x", "false") failed
- [ 23.039613] init: property_set("ro.ril.svdo", "false") failed
- [ 23.409556] init: Service 'config_bluetooth' (pid 327) exited with status 0
- [ 23.685327] wcnss: no space available for smd frame
- [ 23.713898] wcnss: no space available for smd frame
- [ 23.751006] wcnss: no space available for smd frame
- [ 23.783550] wcnss: no space available for smd frame
- [ 23.813692] wcnss: no space available for smd frame
- [ 23.843559] wcnss: no space available for smd frame
- [ 39.101956] BootAnimation (716) used greatest stack depth: 5072 bytes left
- [ 39.165487] init: Service 'bootanim' (pid 545) exited with status 0
- [ 39.321483] init: Starting service 'qti-testscripts'...
- [ 39.337333] init: Starting service 'atfwd'...
- [ 39.343230] init: Starting service 'dmclient'...
- [ 39.374749] init: cannot find '/system/bin/qrngp' (No such file or directory), disabling 'qrngp'
- [ 39.383276] init: Service 'qti-testscripts' (pid 4093) exited with status 0
- [ 39.391973] init: Starting service 'exec 4 (/system/bin/bootstat)'...
- [ 39.394713] type=1400 audit(706.349:4): avc: denied { getattr } for pid=4100 comm="dmclient" path="/vendor" dev="rootfs" ino=7902 scontext=u:r:dmclient:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=0
- [ 39.499062] init: Service 'exec 4 (/system/bin/bootstat)' (pid 4103) exited with status 0
- [ 39.507364] init: Starting service 'exec 5 (/system/bin/bootstat)'...
- [ 39.555133] init: Service 'exec 5 (/system/bin/bootstat)' (pid 4110) exited with status 0
- [ 39.564402] init: Starting service 'exec 6 (/system/bin/bootstat)'...
- [ 39.618521] init: Service 'exec 6 (/system/bin/bootstat)' (pid 4114) exited with status 0
- [ 39.628810] init: Starting service 'exec 7 (/system/bin/bootstat)'...
- [ 39.653734] core_ctl: module license 'BSD' taints kernel.
- [ 39.659468] Disabling lock debugging due to kernel taint
- [ 39.744661] init: Service 'exec 7 (/system/bin/bootstat)' (pid 4122) exited with status 0
- [ 40.525688] init: Starting service 'perfd'...
- [ 40.537909] init: Service 'qcom-post-boot' (pid 4091) exited with status 0
- [ 44.423064] type=1400 audit(711.379:5): avc: denied { read } for pid=4536 comm="RenderThread" name="gpuclk" dev="sysfs" ino=10917 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
- [ 45.089712] init: avc: granted { set } for property=net.lte.ims.data.enabled pid=3751 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
- [ 99.528314] type=1400 audit(766.489:6): avc: denied { read } for pid=4100 comm="dmclient" name="name" dev="sysfs" ino=10438 scontext=u:r:dmclient:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
- [ 99.637114] type=1400 audit(766.599:7): avc: denied { search } for pid=4100 comm="dmclient" name="/" dev="mmcblk0p23" ino=2 scontext=u:r:dmclient:s0 tcontext=u:object_r:cache_file:s0 tclass=dir permissive=0
- [ 596.139190] mmc1: Re-init card rc = -123 (retries = 5)
- [ 596.206370] mmc1: Re-init card rc = -123 (retries = 4)
- [ 596.276841] mmc1: Re-init card rc = -123 (retries = 3)
- [ 596.346597] mmc1: Re-init card rc = -123 (retries = 2)
- [ 596.418000] mmc1: Re-init card rc = -123 (retries = 1)
- [ 596.483296] mmc1: error -123 during resume (card was removed?)
- [ 596.492044] mmc_sd_detect(mmc1): Unable to re-detect card (-123)
- [ 597.768393] FAT-fs (mmcblk1p1): unable to read boot sector to mark fs as dirty
- [ 854.357569] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 1057.380326] mmc1: Re-init card rc = -123 (retries = 5)
- [ 1057.454427] mmc1: Re-init card rc = -123 (retries = 4)
- [ 1057.528456] mmc1: Re-init card rc = -123 (retries = 3)
- [ 1057.597617] mmc1: Re-init card rc = -123 (retries = 2)
- [ 1057.667238] mmc1: Re-init card rc = -123 (retries = 1)
- [ 1057.732665] mmc1: error -123 during resume (card was removed?)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement