API tools faq
paste
Guest User

Untitled

a guest
May 31st, 2017
141
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 53.66 KB | None | 0 0
raw download clone embed print report
  1. <6>[ 0.000000] Booting Linux on physical CPU 0
  2. <6>[ 0.000000] Initializing cgroup subsys cpu
  3. <5>[ 0.000000] Linux version 3.4.0-perf-g063d359 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Wed Sep 3 14:21:44 IST 2014
  4. <4>[ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
  5. <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. <4>[ 0.000000] Machine: LG MSM8625 V7
  7. <6>[ 0.000000] memory pool 3 (start 28600000 size 4900000) initialized
  8. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  9. <1>[ 0.000000] Initialized strongly ordered page successfully
  10. <3>[ 0.000000] smem_find(137, 80): wrong size 64
  11. <3>[ 0.000000] smem_find(137, 72): wrong size 64
  12. <6>[ 0.000000] socinfo_init: v4, id=127, ver=2.0, raw_id=1916, raw_ver=1, hw_plat=2, hw_plat_ver=0
  13. <6>[ 0.000000] L310 cache controller enabled
  14. <6>[ 0.000000] l2x0: 8 ways, CACHE_ID 0x410054c8, AUX_CTRL 0x30d60000, Cache size: 524288 B
  15. <6>[ 0.000000] Prfetch Ctrl: 0x74800003
  16. <7>[ 0.000000] On node 0 totalpages: 164605
  17. <7>[ 0.000000] free_area_init_node: node 0, pgdat c0978340, node_mem_map c0b98000
  18. <7>[ 0.000000] Normal zone: 1434 pages used for memmap
  19. <7>[ 0.000000] Normal zone: 0 pages reserved
  20. <7>[ 0.000000] Normal zone: 163171 pages, LIFO batch:31
  21. <6>[ 0.000000] allocating 6266880 bytes at c162c000 (182c000 physical) for fb
  22. <6>[ 0.000000] Initialized persistent memory from 1ff00000-1ff3dffe
  23. <6>[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1c29000 s14464 r8192 d14208 u36864
  24. <7>[ 0.000000] pcpu-alloc: s14464 r8192 d14208 u36864 alloc=9*4096
  25. <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
  26. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 163171
  27. <5>[ 0.000000] Kernel command line: androidboot.hardware=vee7 msm_cpr.enable=0 androidboot.selinux=permissive enforcing=0 uart_console=disable lge.rev=rev_10 lge.reboot=2003195138 lge.batt_id_info=isl6296_l lge.frst=flag8 lge.lcd_k_cal= lge.panicmode=son_poff androidboot.mode=SecondBoot androidboot.emmc=true androidboot.serialno=33ddbbd0 lge.signed_image=true androidboot.baseband=msm
  28. <6>[ 0.000000] UART CONSOLE : disable
  29. <6>[ 0.000000] BOARD: LGE rev_10
  30. <6>[ 0.000000] rebootmode_setup , reboot_mode = 77665502
  31. <6>[ 0.000000] BATT_ID : isl6296_l
  32. <6>[ 0.000000] FRST MODE : flag8
  33. <6>[ 0.000000] *** lcd_k_cal=, r:0, g:0, b:0
  34. <3>[ 0.000000] set_kernel_silence enter = 1
  35. <6>[ 0.000000] panicmode_setup , panicmode = 0, silencemode = 1
  36. <6>[ 0.000000] ANDROID FBOOT MODE : 1
  37. <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  38. <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  39. <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  40. <6>[ 0.000000] Memory: 250MB 0MB 0MB 256MB 134MB = 642MB total
  41. <5>[ 0.000000] Memory: 630512k/630512k available, 102672k reserved, 0K highmem
  42. <5>[ 0.000000] Virtual kernel memory layout:
  43. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  44. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  45. <5>[ 0.000000] vmalloc : 0xed000000 - 0xff000000 ( 288 MB)
  46. <5>[ 0.000000] lowmem : 0xc0000000 - 0xecc00000 ( 716 MB)
  47. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  48. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  49. <5>[ 0.000000] .text : 0xc0008000 - 0xc08ad900 (8855 kB)
  50. <5>[ 0.000000] .init : 0xc08ae000 - 0xc08e7880 ( 231 kB)
  51. <5>[ 0.000000] .data : 0xc08e8000 - 0xc09957d0 ( 694 kB)
  52. <5>[ 0.000000] .bss : 0xc09957f4 - 0xc0b93364 (2039 kB)
  53. <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  54. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  55. <6>[ 0.000000] NR_IRQS:645
  56. <6>[ 0.000000] sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms
  57. <6>[ 0.000000] Console: colour dummy device 80x30
  58. <6>[ 0.000000] console [tty0] enabled
  59. <6>[ 0.001493] Calibrating delay loop... 298.59 BogoMIPS (lpj=1492992)
  60. <6>[ 0.070101] pid_max: default: 32768 minimum: 301
  61. <6>[ 0.070511] Security Framework initialized
  62. <6>[ 0.070574] SELinux: Initializing.
  63. <7>[ 0.070671] SELinux: Starting in enforcing mode
  64. <6>[ 0.070806] Mount-cache hash table entries: 512
  65. <6>[ 0.072604] Initializing cgroup subsys cpuacct
  66. <6>[ 0.072653] Initializing cgroup subsys devices
  67. <6>[ 0.072689] Initializing cgroup subsys freezer
  68. <6>[ 0.072726] Initializing cgroup subsys net_cls
  69. <6>[ 0.072804] CPU: Testing write buffer coherency: ok
  70. <6>[ 0.073119] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  71. <6>[ 0.073223] hw perfevents: enabled with ARMv7 Cortex-A5 PMU driver, 3 counters available
  72. <6>[ 0.073396] Setting up static identity map for 0x817420 - 0x817484
  73. <6>[ 0.074836] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  74. <6>[ 0.074918] Brought up 2 CPUs
  75. <6>[ 0.074984] SMP: Total of 2 processors activated (597.19 BogoMIPS).
  76. <6>[ 0.082743] dummy:
  77. <6>[ 0.083289] NET: Registered protocol family 16
  78. <6>[ 0.085448] gpiochip_add: registered GPIOs 0 to 15 on device: generic
  79. <6>[ 0.085581] gpiochip_add: registered GPIOs 16 to 42 on device: generic
  80. <6>[ 0.085721] gpiochip_add: registered GPIOs 43 to 67 on device: generic
  81. <6>[ 0.085851] gpiochip_add: registered GPIOs 68 to 94 on device: generic
  82. <6>[ 0.085991] gpiochip_add: registered GPIOs 95 to 106 on device: generic
  83. <6>[ 0.086131] gpiochip_add: registered GPIOs 107 to 132 on device: generic
  84. <6>[ 0.087796] Shared PLL control available.
  85. <6>[ 0.091661] acpuclk_7627_probe()
  86. <6>[ 0.091729] Dynamic reprogramming is ON
  87. <6>[ 0.092751] ACPU running at 600000 KHz
  88. <6>[ 0.092794] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4
  89. <6>[ 0.092853] 0 19200 5 1 2400 4 30720 -1 -1 -1 -1 6 3 4 -1
  90. <6>[ 0.092913] 1 61440 1 4 7680 4 61440 -1 -1 -1 -1 6 3 4 -1
  91. <6>[ 0.092971] 2 122880 1 2 15360 4 61440 -1 1 -1 -1 6 3 7 -1
  92. <6>[ 0.093029] 3 245760 1 1 30720 4 61440 -1 1 -1 -1 6 -1 7 8
  93. <6>[ 0.093088] 4 300000 2 4 37500 4 122880 -1 1 -1 -1 6 -1 7 8
  94. <6>[ 0.093146] 5 320000 0 3 40000 4 122880 -1 1 4 -1 6 -1 7 8
  95. <6>[ 0.093206] 6 480000 0 2 60000 4 122880 5 1 4 -1 -1 -1 7 8
  96. <6>[ 0.093264] 7 600000 2 2 75000 4 160000 5 2 4 -1 -1 -1 -1 9
  97. <6>[ 0.093323] 8 700800 4 1 87500 4 160000 5 3 4 -1 -1 -1 -1 9
  98. <6>[ 0.093381] 9 1008000 4 1 126000 4 200000 -1 -1 7 8 -1 -1 -1 -1
  99. <6>[ 0.093431] CPU0: 5 scaling frequencies supported.
  100. <6>[ 0.093469] CPU1: 5 scaling frequencies supported.
  101. <6>[ 0.093538] msm_cpr_init: cpr: turbo_quot: 0x2f
  102. <6>[ 0.093576] msm_cpr_init: cpr: pvs_fuse: 0x14
  103. <6>[ 0.093611] msm_cpr_init: cpr: floor_fuse: 0x0
  104. <6>[ 0.093849] vddx_c2: 750 <--> 1500 mV at 1150 mV normal
  105. <3>[ 0.093974] Error-Bad Function Input
  106. <6>[ 0.094393] smps1: 1100 mV normal
  107. <6>[ 0.094729] smps2: 1100 mV normal
  108. <6>[ 0.095053] smps3: 1800 mV normal
  109. <6>[ 0.095381] smps4: 2100 mV normal
  110. <6>[ 0.095704] ldo01: 1800 <--> 3300 mV normal
  111. <6>[ 0.096046] ldo02: 2050 <--> 2850 mV normal
  112. <6>[ 0.096384] ldo03: 1200 mV normal
  113. <6>[ 0.096724] ldo04: 1100 mV normal
  114. <6>[ 0.097048] ldo05: 1300 <--> 1350 mV normal
  115. <6>[ 0.097366] ldo06: 1200 mV normal
  116. <6>[ 0.097694] ldo07: 2600 mV normal
  117. <6>[ 0.098033] ldo08: 2850 mV normal
  118. <6>[ 0.098361] ldo09: 1800 mV normal
  119. <6>[ 0.098713] ldo10: 2800 <--> 3000 mV normal
  120. <6>[ 0.099069] ldo11: 1800 mV normal
  121. <6>[ 0.099399] ldo12: 2800 <--> 2850 mV normal
  122. <6>[ 0.099754] ldo13: 2850 mV normal
  123. <6>[ 0.100086] ldo14: 3300 mV normal
  124. <6>[ 0.100503] ldo15: 1800 <--> 2850 mV normal
  125. <6>[ 0.100854] ldo16: 1800 <--> 2850 mV normal
  126. <6>[ 0.101206] ldo17: 3000 <--> 3300 mV normal
  127. <6>[ 0.101548] ldo18: 2700 mV normal
  128. <6>[ 0.101901] ldo19: 1200 <--> 1800 mV normal
  129. <6>[ 0.102256] ncp: 1800 mV normal
  130. <6>[ 0.103693] persistent_ram: uncorrectable error in header
  131. <6>[ 0.103743] persistent_ram: no valid data in buffer (sig = 0x43df476c)
  132. <6>[ 0.128233] console [ram-1] enabled
  133. <4>[ 0.129679] smps3: Failed to create debugfs directory
  134. <4>[ 0.130254] msm_fb_add_devices, maker_id : 0
  135. <4>[ 0.133179] Touch panel maker is 0
  136. <5>[ 0.135183] Boot Reason = 0x01
  137. <6>[ 0.135589] CRASH LOG START ADDR : 0x1ff3e000
  138. <6>[ 0.135769] CRASH LOG END ADDR : 0x1ff3efff
  139. <6>[ 0.141891] fs_gfx3d: normal
  140. <6>[ 0.172094] bio: create slab <bio-0> at 0
  141. <3>[ 0.173006] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1343c8, irq:75
  142. <3>[ 0.173359] qup_i2c qup_i2c.1: I2C slave addr:0x3e not connected
  143. <4>[ 0.173559] sx150x 1-003e: i2c write fail: can't write 01 to 1f: -107
  144. <4>[ 0.173889] sx150x: probe of 1-003e failed with error -107
  145. <6>[ 0.174471] ION heap vmalloc created
  146. <6>[ 0.174844] ION heap camera_preview created at 28600000 with size 1e00000
  147. <6>[ 0.175078] ION heap audio created at 2a400000 with size 22e000
  148. <6>[ 0.175463] ION heap sf created at 2a62e000 with size 2800000
  149. <5>[ 0.176161] SCSI subsystem initialized
  150. <6>[ 0.176719] usbcore: registered new interface driver usbfs
  151. <6>[ 0.177018] usbcore: registered new interface driver hub
  152. <6>[ 0.177386] usbcore: registered new device driver usb
  153. <6>[ 0.178211] i2c-gpio i2c-gpio.2: using pins 112 (SDA) and 111 (SCL)
  154. <6>[ 0.178758] i2c-gpio i2c-gpio.3: using pins 26 (SDA) and 27 (SCL)
  155. <6>[ 0.179371] i2c-gpio i2c-gpio.4: using pins 10 (SDA) and 9 (SCL)
  156. <6>[ 0.179959] i2c-gpio i2c-gpio.5: using pins 30 (SDA) and 16 (SCL)
  157. <6>[ 0.180549] i2c-gpio i2c-gpio.6: using pins 35 (SDA) and 13 (SCL)
  158. <6>[ 0.180906] Linux media interface: v0.10
  159. <6>[ 0.181164] Linux video capture interface: v2.00
  160. <6>[ 0.181763] Advanced Linux Sound Architecture Driver Version 1.0.25.
  161. <6>[ 0.182908] Bluetooth: Core ver 2.16
  162. <6>[ 0.183158] NET: Registered protocol family 31
  163. <6>[ 0.183461] Bluetooth: HCI device and connection manager initialized
  164. <6>[ 0.183651] Bluetooth: HCI socket layer initialized
  165. <6>[ 0.183953] Bluetooth: L2CAP socket layer initialized
  166. <6>[ 0.184426] Bluetooth: SCO socket layer initialized
  167. <6>[ 0.186051] Switching to clocksource dg_timer
  168. <6>[ 0.228971] NET: Registered protocol family 2
  169. <6>[ 0.229619] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  170. <6>[ 0.230856] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  171. <6>[ 0.234619] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  172. <6>[ 0.236876] TCP: Hash tables configured (established 131072 bind 65536)
  173. <6>[ 0.237219] TCP: reno registered
  174. <6>[ 0.237418] UDP hash table entries: 512 (order: 2, 16384 bytes)
  175. <6>[ 0.237789] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  176. <6>[ 0.238643] NET: Registered protocol family 1
  177. <6>[ 0.239309] Unpacking initramfs...
  178. <6>[ 0.623856] Freeing initrd memory: 3244K
  179. <3>[ 0.630141] Notify: smsm init
  180. <4>[ 0.630404] get_nand_partitions: no flash partition table in shared memory
  181. <6>[ 0.636389] rpcrouter_smd_remote_notify: smd opened 0x (null)
  182. <6>[ 0.637034] [adsp.c:adsp_init] msm_adsp -- 0
  183. <6>[ 0.638696] [audpp.c:audpp_probe] Number of decoder supported 5
  184. <6>[ 0.638908] [audpp.c:audpp_probe] Number of concurrency supported 8
  185. <6>[ 0.639234] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
  186. <6>[ 0.639429] [audpp.c:audpp_probe] queueid:13
  187. <3>[ 0.639503] rpcrouter: Server create rejected, version = 0, program = 3000003b
  188. <6>[ 0.639933] [audpp.c:audpp_probe] decid:0
  189. <6>[ 0.640241] [audpp.c:audpp_probe] nr_codec_support:11
  190. <6>[ 0.640428] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
  191. <6>[ 0.640746] [audpp.c:audpp_probe] queueid:14
  192. <6>[ 0.640929] [audpp.c:audpp_probe] decid:1
  193. <6>[ 0.641108] [audpp.c:audpp_probe] nr_codec_support:11
  194. <6>[ 0.641419] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
  195. <6>[ 0.641609] [audpp.c:audpp_probe] queueid:15
  196. <6>[ 0.641923] [audpp.c:audpp_probe] decid:2
  197. <6>[ 0.642109] [audpp.c:audpp_probe] nr_codec_support:11
  198. <6>[ 0.642436] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
  199. <6>[ 0.642631] [audpp.c:audpp_probe] queueid:16
  200. <6>[ 0.642816] [audpp.c:audpp_probe] decid:3
  201. <6>[ 0.643146] [audpp.c:audpp_probe] nr_codec_support:11
  202. <6>[ 0.643349] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
  203. <6>[ 0.643671] [audpp.c:audpp_probe] queueid:17
  204. <6>[ 0.643856] [audpp.c:audpp_probe] decid:4
  205. <6>[ 0.644038] [audpp.c:audpp_probe] nr_codec_support:1
  206. <1>[ 0.647294] dma_test_init, minor number 36
  207. <6>[ 0.647588] lge_panic_handler: got buffer at 1ff3e000, size 1000
  208. <4>[ 0.649494] msm-cpr: probe of msm-cpr failed with error -1
  209. <6>[ 0.649904] MSM Soft Watchdog Initialized
  210. <4>[ 0.650314] diagcmd_probe:lg_fw_diagcmd
  211. <6>[ 0.650463] __msm_rpc_connect: server not found 30000002:20001
  212. <6>[ 0.651186] lge_emmc_direct_access_init: started
  213. <6>[ 0.651658] lge_emmc_direct_access_init: finished
  214. <6>[ 0.654596] rmt_storage_get_ramfs: RAMFS entry: addr = 0x2d040000, size = 0x00300000
  215. <6>[ 0.654936] rmt_storage_get_ramfs: RAMFS entry: addr = 0x2cf40000, size = 0x00100000
  216. <6>[ 0.655561] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
  217. <6>[ 0.656109] audit: initializing netlink socket (disabled)
  218. <5>[ 0.656606] type=2000 audit(0.640:1): initialized
  219. <6>[ 0.669541] fuse init (API version 7.18)
  220. <6>[ 0.670243] msgmni has been set to 1237
  221. <7>[ 0.670498] SELinux: Registering netfilter hooks
  222. <4>[ 0.671534] cryptomgr_test used greatest stack depth: 7068 bytes left
  223. <6>[ 0.673793] io scheduler noop registered
  224. <6>[ 0.674383] io scheduler cfq registered (default)
  225. <4>[ 0.674918] lm3530_init init start
  226. <7>[ 0.675453] Registered led device: lcd-backlight
  227. <3>[ 0.675473] lm3530bl:lm3530_probe: Registering led class dev successfully.
  228. <3>[ 0.676531] lm3530bl:lm3530_probe: done
  229. <6>[ 0.678723] mipi_dsi base phy_addr = 0xa1100000 virt = 0xed200000
  230. <6>[ 0.679776] setting pdata->panel_info.fb_num to 3. type: 8
  231. <4>[ 0.680338] ### call the initial lut update routine
  232. <4>[ 0.680653] mdp_lut_init_update_lcdc start ..
  233. <4>[ 0.680831] ### mdp_lut_init_update_lcdc mdp_lut_init_update_lcdc++: mdp_lut_i = 0
  234. <4>[ 0.681153] ### mdp_lut_hw_updae++: mdp_lut_i = 0
  235. <4>[ 0.681329] #### Sign is not Matched#### Cal value R=255 G=255 B=255
  236. <4>[ 0.682031] mdp_lut_init_update_lcdc end.........
  237. <6>[ 0.686679] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  238. <6>[ 0.688068] msm_serial: driver initialized
  239. <6>[ 0.688904] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 77) is a MSM HS UART
  240. <6>[ 0.689588] msm_serial_hs module loaded
  241. <6>[ 0.691971] diagchar initialized now
  242. <6>[ 0.692021] LG_FW : diagchar_open succeed
  243. <7>[ 0.692081] LG_FW : CreateWaitThread, diagchar_read 10004 byte
  244. <7>[ 0.692098] LG_FW : CreateWaitThread, diagchar_read 1004 byte
  245. <7>[ 0.692129] LG_FW : CreateWaitThread, diagchar_read 8004 byte
  246. <4>[ 0.695053] dalrpc_rcv_DAL0 used greatest stack depth: 7036 bytes left
  247. <6>[ 0.695654] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  248. <6>[ 0.703216] loop: module loaded
  249. <6>[ 0.703784] lge_tty_atcmd_init: initialize atcmd-ttys
  250. <6>[ 0.704233] lge_kcal_init: finished
  251. <6>[ 0.917369] SCSI Media Changer driver v0.25
  252. <6>[ 0.919064] tun: Universal TUN/TAP device driver, 1.6
  253. <6>[ 0.919254] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  254. <6>[ 0.919708] rmnet_init: SMD devices[8]
  255. <6>[ 0.927704] PPP generic driver version 2.4.2
  256. <4>[ 0.929708] modprobe used greatest stack depth: 6188 bytes left
  257. <6>[ 0.931783] PPP MPPE Compression module registered
  258. <6>[ 0.931986] NET: Registered protocol family 24
  259. <7>[ 0.932466] gpio_request: gpio-141 (i2c_host_vbus_en) status -22
  260. <3>[ 0.932484] failed to request 141 GPIO
  261. <6>[ 0.933753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  262. <6>[ 0.934239] host driver registered w/ tranceiver
  263. <6>[ 0.934661] usbcore: registered new interface driver usb_ehset_test
  264. <6>[ 0.935584] peripheral driver registered w/ tranceiver
  265. <6>[ 0.936621] mbim_init: initialize 1 instances
  266. <6>[ 0.936954] mbim_init: Initialized 1 ports
  267. <4>[ 0.939371] [usb](android) ecm_function_init start
  268. <4>[ 0.939649] android_usb gadget: using random self ethernet address
  269. <4>[ 0.940126] android_usb gadget: using random host ethernet address
  270. <6>[ 0.941038] usb0: MAC e6:ba:86:44:3f:ec
  271. <6>[ 0.941344] usb0: HOST MAC d6:83:e0:b2:90:fd
  272. <6>[ 0.941861] android_usb gadget: Mass Storage Function, version: 2009/09/11
  273. <6>[ 0.942181] android_usb gadget: Number of LUNs=1
  274. <6>[ 0.942366] lun0: LUN: removable file: (no medium)
  275. <6>[ 0.943934] android_set_factory_mode : Using Normal Cable (11)
  276. <6>[ 0.944259] android_usb gadget: android_usb ready
  277. <6>[ 0.945203] [Touch D] synaptics_t1320_power_on: power On
  278. <4>[ 0.945766] [Touch D] synaptics_ts_config_gpio on
  279. <6>[ 1.156591] msm_hsusb_set_vbus_state USB Connection
  280. <6>[ 1.359294] [Touch] common[0P:0x01] finger[0P:0x11] button[2P:0x1a] analog[1P:0x54] flash[0P:0x34]
  281. <6>[ 1.364806] [Touch] DEVICE CONTROL_REG = 0
  282. <6>[ 1.367733] [Touch] Stylus Pen is Enabled
  283. <6>[ 1.369161] [Touch] force continuous mode !!!
  284. <6>[ 1.369863] [Touch] Synaptics PLG180 - 1(operation_mode:2): FW ver[E054], force[0]
  285. <6>[ 1.370064] [Touch] irq_pin[1] next_work[0] ghost_stage[0x1]
  286. <6>[ 1.370393] [Touch D] synaptics_t1320_power_on: power Off
  287. <4>[ 1.370613] ldo01: Failed to create debugfs directory
  288. <4>[ 1.371078] [Touch D] synaptics_ts_config_gpio off
  289. <6>[ 1.396443] [Touch D] synaptics_t1320_power_on: power On
  290. <4>[ 1.396778] ldo01: Failed to create debugfs directory
  291. <4>[ 1.397104] [Touch D] synaptics_ts_config_gpio on
  292. <6>[ 1.466896] android_set_factory_mode : Using Normal Cable (11)
  293. <6>[ 1.696646] android_work: android_work: did not send uevent (0 0 (null))
  294. <6>[ 1.807583] [Touch] DEVICE CONTROL_REG = 0
  295. <6>[ 1.810356] [Touch] Stylus Pen is Enabled
  296. <6>[ 1.811779] [Touch] force continuous mode !!!
  297. <6>[ 1.812476] [Touch] Synaptics PLG180 - 1(operation_mode:2): FW ver[E054], force[0]
  298. <6>[ 1.812674] [Touch] irq_pin[1] next_work[0] ghost_stage[0x1]
  299. <6>[ 1.813004] [Touch] IC identifier[PLG180 - 1] fw_version0[E054:E054] : force[0]
  300. <6>[ 1.813201] [Touch] FW-upgrade is not executed
  301. <6>[ 1.814124] [Touch] SENSOR_MAX_X=1100
  302. <6>[ 1.814916] [Touch] SENSOR_MAX_Y=1900
  303. <6>[ 1.815581] input: touch_dev as /devices/virtual/input/input0
  304. <6>[ 1.816364] [Touch] Touch driver is initialized
  305. <4>[ 1.817084] GPIO Matrix Keypad Driver: Start keypad matrix for vee7_keypad in interrupt mode
  306. <6>[ 1.817823] input: vee7_keypad as /devices/virtual/input/input1
  307. <6>[ 1.818721] bma2x2_probe
  308. <6>[ 1.819643] Bosch Sensortec Device detected!
  309. <6>[ 1.819651] BMA255 registered I2C driver!
  310. <4>[ 1.857049] ------------[ cut here ]------------
  311. <4>[ 1.857258] WARNING: at /home/mangarao.mudunuri/Release/V7_KK/VNM_V20a_03_SEP/android/kernel/kernel/irq/manage.c:520 irq_set_irq_wake+0x88/0xe8()
  312. <4>[ 1.857601] Unbalanced IRQ 350 wake disable
  313. <4>[ 1.857898] Modules linked in:
  314. <4>[ 1.858251] [<c0015198>] (unwind_backtrace+0x0/0x11c) from [<c009b810>] (warn_slowpath_common+0x4c/0x64)
  315. <4>[ 1.858596] [<c009b810>] (warn_slowpath_common+0x4c/0x64) from [<c009b8a8>] (warn_slowpath_fmt+0x2c/0x3c)
  316. <4>[ 1.858943] [<c009b8a8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00f4bbc>] (irq_set_irq_wake+0x88/0xe8)
  317. <4>[ 1.859166] [<c00f4bbc>] (irq_set_irq_wake+0x88/0xe8) from [<c03e122c>] (bma2x2_irq_work_func+0x18/0x4a4)
  318. <4>[ 1.859516] [<c03e122c>] (bma2x2_irq_work_func+0x18/0x4a4) from [<c00b4264>] (process_one_work+0x220/0x42c)
  319. <4>[ 1.859863] [<c00b4264>] (process_one_work+0x220/0x42c) from [<c00b47b4>] (worker_thread+0x19c/0x2bc)
  320. <4>[ 1.860209] [<c00b47b4>] (worker_thread+0x19c/0x2bc) from [<c00b8210>] (kthread+0x84/0x94)
  321. <4>[ 1.860556] [<c00b8210>] (kthread+0x84/0x94) from [<c000f778>] (kernel_thread_exit+0x0/0x8)
  322. <4>[ 1.860788] ---[ end trace 192b73b81b330acd ]---
  323. <6>[ 1.861699] [bma2x2_irq_work_func]interrupt happened --> reg value : 0
  324. <6>[ 1.862304] input: bma2x2 as /devices/virtual/input/input2
  325. <4>[ 1.866308] i2c-core: driver [bma2x2] using legacy suspend method
  326. <4>[ 1.866543] i2c-core: driver [bma2x2] using legacy resume method
  327. <4>[ 1.866931]
  328. <4>[ 1.866936] [I]<6><><bmm_probe><1174>function entrance
  329. <4>[ 1.867276]
  330. <4>[ 1.867281] [I]<6><><bmm_wakeup><193>waking up the chip...
  331. <4>[ 1.871999]
  332. <4>[ 1.872004] [I]<6><><bmm_wakeup><209>wake up result: succeed, tried times: 2
  333. <4>[ 1.872471]
  334. <4>[ 1.872476] [I]<6><><bmm_probe><1198>register dump after waking up
  335. <7>[ 1.872833] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
  336. <7>[ 1.872843]
  337. <7>[ 1.881573] 32 05 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
  338. <7>[ 1.881583] 00 00 00 ff 00 03 a6 42 00 88 46 63 46 00 00 00
  339. <7>[ 1.881591] 3e 4f 00 00 1d 1d 18 00 d7 02 57 5a 67 19 f5 fb
  340. <7>[ 1.881601] fd 1d ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  341. <7>[ 1.881609]
  342. <4>[ 1.882226]
  343. <4>[ 1.882231] [I]<6><><bmm_check_chip_id><144>read chip id result: 0x32
  344. <4>[ 1.882694]
  345. <4>[ 1.882701] [N]<5><><bmm_probe><1203>Bosch Sensortec Device bmm050 detected
  346. <6>[ 1.883471] input: bmm050 as /devices/virtual/input/input3
  347. <7>[ 1.896681] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
  348. <7>[ 1.896691]
  349. <7>[ 1.905394] 32 05 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
  350. <7>[ 1.905403] 00 04 0f ff 00 03 a6 42 00 88 46 63 46 00 00 00
  351. <7>[ 1.905413] 3e 4f 00 00 1d 1d 18 00 d7 02 57 5a 67 19 f5 fb
  352. <7>[ 1.905421] fd 1d ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  353. <7>[ 1.905431]
  354. <4>[ 1.906523]
  355. <4>[ 1.906528] [N]<5><><bmm_probe><1295>sensor bmm050 probed successfully
  356. <6>[ 1.907323] apds9130_probe 1125
  357. <6>[ 1.907329]
  358. <6>[ 1.908828] APDS-9130
  359. <6>[ 1.913028] ==> apds9130_interrupt
  360. <6>[ 1.914874] status = 0
  361. <6>[ 1.915591] apds9130_probe interrupt is hooked
  362. <6>[ 1.916198] input: proximity as /devices/virtual/input/input4
  363. <6>[ 1.916626] apds9130_probe support ver. 1.0.3 enabled
  364. <4>[ 1.916998] i2c-core: driver [apds9130] using legacy suspend method
  365. <4>[ 1.917188] i2c-core: driver [apds9130] using legacy resume method
  366. <6>[ 1.920199] RPC CALL -- TOD TIME UPDATE: ttick = 331521
  367. <6>[ 1.920209] stamp=61879346180161536, freq = -1431655766
  368. <3>[ 1.920711] /home/mangarao.mudunuri/Release/V7_KK/VNM_V20a_03_SEP/android/kernel/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  369. <6>[ 1.922434] using rtc device, msm_rtc, for alarms
  370. <6>[ 1.922674] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
  371. <6>[ 1.923988] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
  372. <6>[ 1.924389] i2c /dev entries driver
  373. <3>[ 1.926974] __jrchoi: msm_sensor_init_module: E
  374. <4>[ 1.927214] imx111_sensor_power_up: E 957
  375. <4>[ 1.941906] imx111_sensor_power_up: X 1010
  376. <3>[ 1.942766] msm_eeprom_probe probe_fail
  377. <6>[ 1.943423] msm_sensor_register mctl_node_name[0] = video1
  378. <4>[ 1.943743] imx111_sensor_power_down : E
  379. <4>[ 1.944061] imx111_sensor_power_down : X
  380. <3>[ 1.944329] __jrchoi: msm_sensor_init_module: E
  381. <4>[ 1.944674] imx219_sensor_power_up: E 821
  382. <4>[ 1.958461] imx219_sensor_power_up: X 874
  383. <3>[ 1.958843] msm_sensor_match_id chip id doesnot match
  384. <3>[ 1.959153] msm_sensor_i2c_probe imx219_i2c_probe failed
  385. <4>[ 1.959333] imx219_sensor_power_down : E
  386. <4>[ 1.959778] imx219_sensor_power_down : X
  387. <4>[ 1.960086] hi707_sensor_power_up: E 3480
  388. <4>[ 2.056489] hi707_sensor_power_up: X 3554
  389. <3>[ 2.057069] msm_eeprom_probe probe_fail
  390. <6>[ 2.057694] msm_sensor_register mctl_node_name[1] = video3
  391. <4>[ 2.058014] hi707_sensor_power_down: E 3570
  392. <4>[ 2.136523] hi707_sensor_power_down: X 3599
  393. <6>[ 2.138081] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  394. <6>[ 2.138553] tavarua_radio: tavarua_probe: probe called
  395. <7>[ 2.139084] msm_batt_init: enter
  396. <7>[ 2.141658] msm_batt_enable_filter: enable vbatt filter: OK
  397. <6>[ 2.141679] msm_batt_update_psy_status: enter
  398. <6>[ 2.149533] BATT: rcvd: 0, 2, 0, 4; 4016, 200, 73, 0
  399. <7>[ 2.149723] BATT: USB charger plugged in
  400. <7>[ 2.149739] BATT: Charging.
  401. <7>[ 2.149756] BATT: Supply = usb
  402. <6>[ 2.149956] msm_batt_update_psy_status: exit
  403. <6>[ 2.150418] msm_batt_init: Charger/Battery = 0x00040001/0x00050001 (RPC version)
  404. <6>[ 2.150624] lge_pm_boot_batt_id_check, High Voltage Battery Detected
  405. <6>[ 2.152373] msm_adc successfully registered
  406. <6>[ 2.152556] msm_adc successfully registered
  407. <6>[ 2.153661] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  408. <6>[ 2.155599] mmc0: SDCC Version: 0x00000000
  409. <3>[ 2.156084] mmc0: No card detect facilities available
  410. <6>[ 2.158239] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 80,0 dma 7 dmacrcri 12
  411. <6>[ 2.158573] mmc0: Controller capabilities: 0x00000001
  412. <6>[ 2.158753] mmc0: 8 bit data mode enabled
  413. <6>[ 2.159051] mmc0: 4 bit data mode disabled
  414. <6>[ 2.159226] mmc0: polling status mode disabled
  415. <6>[ 2.159406] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  416. <6>[ 2.159713] mmc0: Slot eject status = 0
  417. <6>[ 2.159886] mmc0: Power save feature enable = 1
  418. <6>[ 2.160186] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x27240000
  419. <6>[ 2.160374] mmc0: DM cmd busaddr 0x27240000, cmdptr busaddr 0x27257f40
  420. <6>[ 2.161346] mmc1: SDCC Version: 0x00000000
  421. <6>[ 2.163438] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 56,296 dma 8 dmacrcri 6
  422. <6>[ 2.163774] mmc1: Controller capabilities: 0x00000001
  423. <6>[ 2.163954] mmc1: 8 bit data mode disabled
  424. <6>[ 2.164253] mmc1: 4 bit data mode enabled
  425. <6>[ 2.164429] mmc1: polling status mode disabled
  426. <6>[ 2.164609] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  427. <6>[ 2.164918] mmc1: Slot eject status = 0
  428. <6>[ 2.165093] mmc1: Power save feature enable = 1
  429. <6>[ 2.165394] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x27260000
  430. <6>[ 2.165586] mmc1: DM cmd busaddr 0x27260000, cmdptr busaddr 0x27277f40
  431. <6>[ 2.166639] mmc2: SDCC Version: 0x00000000
  432. <3>[ 2.167059] mmc2: No card detect facilities available
  433. <6>[ 2.168741] mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 58,0 dma 8 dmacrcri 7
  434. <6>[ 2.168946] mmc2: Controller capabilities: 0x00000001
  435. <6>[ 2.169389] mmc2: 8 bit data mode disabled
  436. <6>[ 2.169569] mmc2: 4 bit data mode enabled
  437. <6>[ 2.169868] mmc2: polling status mode disabled
  438. <6>[ 2.170049] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  439. <6>[ 2.170356] mmc2: Slot eject status = 0
  440. <6>[ 2.170528] mmc2: Power save feature enable = 1
  441. <6>[ 2.170709] mmc2: DM non-cached buffer at ffd40000, dma_addr 0x27280000
  442. <6>[ 2.171021] mmc2: DM cmd busaddr 0x27280000, cmdptr busaddr 0x27297f40
  443. <7>[ 2.171651] Registered led device: button-backlight
  444. <6>[ 2.172686] as3647 3-0030: AS364X driver v1.0: detected AS364X compatible chip with id b2
  445. <6>[ 2.250708] usbcore: registered new interface driver usbhid
  446. <6>[ 2.253176] usbhid: USB HID core driver
  447. <6>[ 2.254329] zram: Created 1 device(s) ...
  448. <6>[ 2.255506] ashmem: initialized
  449. <6>[ 2.255958] logger: created 256K log 'log_main'
  450. <6>[ 2.256263] logger: created 256K log 'log_events'
  451. <6>[ 2.256616] logger: created 256K log 'log_radio'
  452. <6>[ 2.257058] logger: created 256K log 'log_system'
  453. <6>[ 2.258499] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  454. <3>[ 2.259946] msm_soc: ALSA MSM Mixer Setting
  455. <6>[ 2.260534] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  456. <6>[ 2.261736] __msm_rpc_connect: server not found 30000002:20001
  457. <7>[ 2.261929] msm_snd_rpc_connect failed (compatible VERS = 131073) trying again with another API
  458. <6>[ 2.262424] oprofile: using arm/armv7
  459. <6>[ 2.262894] GACT probability on
  460. <6>[ 2.263083] Mirror/redirect action on
  461. <6>[ 2.263261] Simple TC action Loaded
  462. <6>[ 2.264339] netem: version 1.3
  463. <6>[ 2.264529] u32 classifier
  464. <6>[ 2.264701] Performance counters on
  465. <6>[ 2.264873] input device check on
  466. <6>[ 2.265244] Actions configured
  467. <6>[ 2.265439] Netfilter messages via NETLINK v0.30.
  468. <6>[ 2.265709] nf_conntrack version 0.5.0 (9902 buckets, 39608 max)
  469. <6>[ 2.267271] ctnetlink v0.93: registering with nfnetlink.
  470. <6>[ 2.267523] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  471. <6>[ 2.267838] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  472. <6>[ 2.268473] xt_time: kernel timezone is -0000
  473. <6>[ 2.269396] ip_tables: (C) 2000-2006 Netfilter Core Team
  474. <6>[ 2.269931] arp_tables: (C) 2002 David S. Miller
  475. <6>[ 2.270339] TCP: cubic registered
  476. <6>[ 2.270514] Initializing XFRM netlink socket
  477. <6>[ 2.271619] NET: Registered protocol family 10
  478. <6>[ 2.275303] Mobile IPv6
  479. <6>[ 2.275541] ip6_tables: (C) 2000-2006 Netfilter Core Team
  480. <6>[ 2.276174] IPv6 over IPv4 tunneling driver
  481. <6>[ 2.278471] NET: Registered protocol family 17
  482. <6>[ 2.278814] NET: Registered protocol family 15
  483. <6>[ 2.279124] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  484. <6>[ 2.279438] L2TP core driver, V2.0
  485. <6>[ 2.279934] PPPoL2TP kernel driver, V2.0
  486. <6>[ 2.281419] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  487. <6>[ 2.281931] ThumbEE CPU extension supported.
  488. <5>[ 2.282236] Registering SWP/SWPB emulation handler
  489. <6>[ 2.287556] clock_late_init: Removing enables held for handed-off clocks
  490. <6>[ 2.289606] cpufreq: cpu0 init at 600000 switching to 480000
  491. <6>[ 2.292451] input: 7k_handset as /devices/virtual/input/input5
  492. <4>[ 2.293531] report_hs_key: reported key is 1
  493. <6>[ 2.294944] [BootMode] apps_boot_mode = 0x77665502
  494. <6>[ 2.295948] [FTM] check manual mode [0]
  495. <6>[ 2.296133] All above check routines are passed.
  496. <6>[ 2.296319] [BootMode] boot_mode = unknown
  497. <6>[ 2.313213] input: touch_tester as /devices/virtual/input/input6
  498. <6>[ 2.314111] rs30000048 rs30000048.262144: setting system clock to 2017-05-31 08:35:16 UTC (1496219716)
  499. <4>[ 2.314601] Rmt Wait Info Success
  500. <6>[ 2.315009] HSD.fsa8008[lge_hsd_init : 984]lge_hsd_init
  501. <6>[ 2.315123] HSD.fsa8008[lge_hsd_init : 987]wake lock init
  502. <6>[ 2.315611] HSD.fsa8008[lge_hsd_probe : 711]lge_hsd_probe
  503. <6>[ 2.316476] HSD.fsa8008[lge_hsd_probe : 803]hi->irq_detect = 297
  504. <6>[ 2.316959] HSD.fsa8008[lge_hsd_probe : 828]hi->irq_key = 285
  505. <6>[ 2.317078] HSD.fsa8008[lge_hsd_probe : 836]initialized irq of gpio_key
  506. <6>[ 2.317271] HSD.fsa8008[lge_hsd_probe : 843]name : h2w state : c0467744 : c04676ec
  507. <6>[ 2.317661] HSD.fsa8008[lge_hsd_probe : 849]request_threaded_irq
  508. <6>[ 2.317978] HSD.fsa8008[button_irq_handler: 431]button_irq_handler [0]
  509. <6>[ 2.318326] HSD.fsa8008[lge_hsd_probe : 860]irq_set_irq_wake(hi->irq_key, 1)
  510. <6>[ 2.318539] HSD.fsa8008[lge_hsd_probe : 866]initialize input device
  511. <6>[ 2.319001] input: ffa-keypad as /devices/virtual/input/input7
  512. <6>[ 2.319429] ALSA device list:
  513. <6>[ 2.319616] #0: msm-audio
  514. <6>[ 2.320209] Freeing init memory: 228K
  515. <7>[ 2.331801] SELinux: 1024 avtab hash slots, 2816 rules.
  516. <7>[ 2.333616] SELinux: 1024 avtab hash slots, 2816 rules.
  517. <7>[ 2.333663] SELinux: 1 users, 2 roles, 292 types, 1 bools, 1 sens, 1024 cats
  518. <7>[ 2.333681] SELinux: 84 classes, 2816 rules
  519. <6>[ 2.334599] mmc0: new high speed MMC card at address 0001
  520. <6>[ 2.335546] mmcblk0: mmc0:0001 SEM04G 3.68 GiB
  521. <7>[ 2.335559] SELinux: Completing initialization.
  522. <7>[ 2.335568] SELinux: Setting up existing superblocks.
  523. <7>[ 2.335604] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  524. <7>[ 2.335641] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  525. <7>[ 2.336564] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  526. <7>[ 2.336594] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  527. <7>[ 2.336633] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  528. <7>[ 2.336673] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  529. <6>[ 2.339023] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 >
  530. <7>[ 2.341389] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  531. <7>[ 2.341421] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  532. <7>[ 2.341444] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  533. <7>[ 2.341469] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  534. <7>[ 2.341513] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  535. <7>[ 2.341611] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  536. <7>[ 2.341659] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  537. <6>[ 2.348578] [bma2x2_irq_work_func]interrupt happened --> reg value : 80
  538. <6>[ 2.349269] flat = 1 detection interrupt happened
  539. <3>[ 2.356434] HSD.fsa8008[button_released : 232]button_released but ear jack is plugged out already! just ignore the event.
  540. <5>[ 2.494514] type=1403 audit(1496219716.670:2): policy loaded auid=4294967295 ses=4294967295
  541. <4>[ 2.494979] SELinux: Loaded policy from /sepolicy
  542. <4>[ 2.499504] SELinux: Loaded file_contexts from /file_contexts
  543. <6>[ 2.501328] msm_batt_update_psy_status: enter
  544. <6>[ 2.508549] BATT: same event count = 1
  545. <4>[ 2.665309] mmc1: host does not support reading read-only switch. assuming write-enable.
  546. <6>[ 2.670989] mmc1: new high speed SDHC card at address aaaa
  547. <6>[ 2.671793] mmcblk1: mmc1:aaaa SL32G 29.7 GiB
  548. <6>[ 2.674514] mmcblk1: p1
  549. <6>[ 2.730694] msm_batt_update_psy_status: enter
  550. <6>[ 2.736494] BATT: rcvd: 0, 2, 0, 4; 4002, 200, 78, 480
  551. <7>[ 2.736618] BATT: In charging
  552. <7>[ 2.736628] BATT: Supply = usb
  553. <6>[ 2.736649] msm_batt_update_psy_status: exit
  554. <3>[ 4.112703] init: /init.rc: 57: invalid command 'load_all_props'
  555. <3>[ 4.112864] init: /init.rc: 61: invalid command 'load_system_props'
  556. <3>[ 4.113174] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
  557. <3>[ 4.113433] init: could not import file '/init.recovery.vee7.rc' from '/init.rc'
  558. <4>[ 4.117281] healthd: Unrecognized healthd option: ?
  559. <3>[ 4.117426] healthd: wakealarm_init: timerfd_create failed
  560. <3>[ 4.378166] init: /dev/hw_random not found
  561. <3>[ 4.378613] init: cannot open '/initlogo.rle'
  562. <7>[ 4.380218] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  563. <3>[ 4.386334] enable_store: android_usb: already disabled
  564. <6>[ 4.386808] functions_store: functions_store: request function list: mtp,adb
  565. <3>[ 4.387276] init: /dev/hw_random not found
  566. <3>[ 4.387478] init: Unable to open persistent property directory /data/property errno: 2
  567. <3>[ 4.394279] enable_store: android_usb: already disabled
  568. <4>[ 4.397064] healthd: Unrecognized healthd option: ?
  569. <3>[ 4.397329] healthd: wakealarm_init: timerfd_create failed
  570. <6>[ 4.402506] adb_open
  571. <6>[ 4.402673] mtp_bind_config
  572. <6>[ 4.402918] adb_bind_config
  573. <4>[ 4.411491] permissive.sh used greatest stack depth: 6036 bytes left
  574. <6>[ 4.423313] mdp_block_power_cnt[block=4] multiple power-off request
  575. <6>[ 4.423333] mipi_hx8379a_chip_lcd_off START
  576. <6>[ 4.556429] mipi_dsi_clk_disable: mipi_dsi_clks already OFF
  577. <6>[ 4.556444] mipi_dsi_ahb_ctrl: ahb clks already OFF
  578. <4>[ 4.556454] mipi_ldp_lcd_hx8379a_panel_poweroff start
  579. <4>[ 4.556464] mipi_ldp_lcd_hx8379a_panel_poweroff LCD_RESET low..
  580. <4>[ 4.586424] mipi_ldp_lcd_hx8379a_panel_poweroff end
  581. <6>[ 4.617076] android_work: android_work: Normal Cable DISConnect
  582. <6>[ 4.617139] android_work: android_work: sent uevent USB_STATE=CONNECTED
  583. <4>[ 4.646519] mipi_dsi_panel_power hx8379a start
  584. <4>[ 4.666568] mipi_dsi_panel_power RESET of off start
  585. <4>[ 4.726436] mipi_dsi_panel_power hx8379a end
  586. <4>[ 4.729296] mipi_hx8379a_lcd_on START
  587. <6>[ 4.878289] android_usb gadget: high-speed config #1: android
  588. <6>[ 4.936446] android_work: android_work: Normal Cable DISConnect
  589. <6>[ 4.936488] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  590. <4>[ 4.996438] mipi_hx8379a_lcd_on FINISH
  591. <6>[ 5.036436] mipi_dsi_ahb_ctrl: ahb clks already ON
  592. <6>[ 5.036444] mipi_dsi_clk_enable: mipi_dsi_clks already ON
  593. <6>[ 5.036456] mipi_hx8379a_chip_lcd_off START
  594. <4>[ 5.176794] mipi_ldp_lcd_hx8379a_panel_poweroff start
  595. <4>[ 5.176806] mipi_ldp_lcd_hx8379a_panel_poweroff LCD_RESET low..
  596. <4>[ 5.206424] mipi_ldp_lcd_hx8379a_panel_poweroff end
  597. <4>[ 5.266489] mipi_dsi_panel_power hx8379a start
  598. <4>[ 5.286551] mipi_dsi_panel_power RESET of off start
  599. <4>[ 5.346434] mipi_dsi_panel_power hx8379a end
  600. <4>[ 5.348916] mipi_hx8379a_lcd_on START
  601. <6>[ 5.396443]
  602. <6>[ 5.396446] Charger Type: STD DOWNSTREAM PORT
  603. <6>[ 5.402491] msm_batt_update_psy_status: enter
  604. <6>[ 5.404939] BATT: rcvd: 0, 2, 0, 2; 4009, 200, 78, 480
  605. <7>[ 5.404953] BATT: In charging
  606. <7>[ 5.404961] BATT: Supply = usb
  607. <6>[ 5.404979] msm_batt_update_psy_status: exit
  608. <4>[ 5.616439] mipi_hx8379a_lcd_on FINISH
  609. <6>[ 5.730783] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts:
  610. <7>[ 5.730954] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
  611. <6>[ 5.762016] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts:
  612. <7>[ 5.762259] SELinux: initialized (dev mmcblk0p20, type ext4), uses xattr
  613. <6>[ 5.763611] SELinux: Context u:object_r:media_rw_data_file:s0 is not valid (left unmapped).
  614. <6>[ 5.865836] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts:
  615. <7>[ 5.866003] SELinux: initialized (dev mmcblk0p20, type ext4), uses xattr
  616. <6>[ 5.910748] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts:
  617. <7>[ 5.910991] SELinux: initialized (dev mmcblk0p14, type ext4), uses xattr
  618. <7>[ 5.990088] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
  619. <6>[ 7.485849] msm_batt_update_psy_status: enter
  620. <6>[ 7.488391] BATT: rcvd: 0, 2, 0, 2; 3985, 200, 78, 488
  621. <7>[ 7.488593] BATT: In charging
  622. <7>[ 7.488604] BATT: Supply = usb
  623. <6>[ 7.488624] msm_batt_update_psy_status: exit
  624. <7>[ 8.099681] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
  625. <6>[ 8.397673] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts:
  626. <7>[ 8.397916] SELinux: initialized (dev mmcblk0p14, type ext4), uses xattr
  627. <6>[ 9.168518] mtp_open
  628. <6>[ 10.745728] adb_release
  629. <6>[ 10.746056] android_work: android_work: Normal Cable DISConnect
  630. <6>[ 10.746341] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  631. <6>[ 10.746623] adb_open
  632. <6>[ 10.746923] mtp_release
  633. <6>[ 10.747094] mtp_open
  634. <6>[ 10.838681] android_work: android_work: Normal Cable DISConnect
  635. <6>[ 10.838934] android_work: android_work: sent uevent USB_STATE=CONNECTED
  636. <6>[ 10.972283] android_usb gadget: high-speed config #1: android
  637. <6>[ 10.978156] msm_batt_update_psy_status: enter
  638. <6>[ 10.980369] BATT: rcvd: 0, 2, 0, 2; 4007, 200, 78, 488
  639. <7>[ 10.980571] BATT: In charging
  640. <7>[ 10.980583] BATT: Supply = usb
  641. <6>[ 10.980603] msm_batt_update_psy_status: exit
  642. <6>[ 11.026459] android_work: android_work: Normal Cable DISConnect
  643. <6>[ 11.026619] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  644. <6>[ 12.470546] msm_batt_update_psy_status: enter
  645. <6>[ 12.473171] BATT: rcvd: 0, 2, 0, 2; 4008, 200, 78, 488
  646. <7>[ 12.473373] BATT: In charging
  647. <7>[ 12.473383] BATT: Supply = usb
  648. <6>[ 12.473403] msm_batt_update_psy_status: exit
  649. <6>[ 17.021493] mtp_release
  650. <6>[ 17.021654] mtp_open
  651. <6>[ 17.021918] adb_release
  652. <6>[ 17.022106] adb_open
  653. <6>[ 17.022346] android_work: android_work: Normal Cable DISConnect
  654. <6>[ 17.022634] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  655. <6>[ 17.111583] android_work: android_work: Normal Cable DISConnect
  656. <6>[ 17.111831] android_work: android_work: sent uevent USB_STATE=CONNECTED
  657. <6>[ 17.245789] android_usb gadget: high-speed config #1: android
  658. <6>[ 17.251929] msm_batt_update_psy_status: enter
  659. <6>[ 17.254231] BATT: same event count = 1
  660. <6>[ 17.296449] android_work: android_work: Normal Cable DISConnect
  661. <6>[ 17.296604] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  662. <6>[ 17.455388] msm_batt_update_psy_status: enter
  663. <6>[ 17.457961] BATT: same event count = 2
  664. <6>[ 22.440039] msm_batt_update_psy_status: enter
  665. <6>[ 22.442588] BATT: same event count = 3
  666. <6>[ 24.254494] android_work: android_work: Normal Cable DISConnect
  667. <6>[ 24.254758] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  668. <6>[ 24.255036] mtp_release
  669. <6>[ 24.255188] mtp_open
  670. <6>[ 24.255503] adb_release
  671. <6>[ 24.255689] adb_open
  672. <6>[ 24.342894] android_work: android_work: Normal Cable DISConnect
  673. <6>[ 24.343148] android_work: android_work: sent uevent USB_STATE=CONNECTED
  674. <6>[ 24.472418] android_usb gadget: high-speed config #1: android
  675. <6>[ 24.478388] msm_batt_update_psy_status: enter
  676. <6>[ 24.480628] BATT: rcvd: 0, 2, 0, 2; 4009, 200, 78, 489
  677. <7>[ 24.480749] BATT: In charging
  678. <7>[ 24.480761] BATT: Supply = usb
  679. <6>[ 24.480781] msm_batt_update_psy_status: exit
  680. <6>[ 24.526446] android_work: android_work: Normal Cable DISConnect
  681. <6>[ 24.526601] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  682. <6>[ 27.424789] msm_batt_update_psy_status: enter
  683. <6>[ 27.427428] BATT: rcvd: 0, 2, 0, 2; 4008, 200, 78, 489
  684. <7>[ 27.427626] BATT: In charging
  685. <7>[ 27.427636] BATT: Supply = usb
  686. <6>[ 27.427654] msm_batt_update_psy_status: exit
  687. <6>[ 31.112879] android_work: android_work: Normal Cable DISConnect
  688. <6>[ 31.113136] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  689. <6>[ 31.113461] mtp_release
  690. <6>[ 31.113691] mtp_open
  691. <6>[ 31.113939] adb_release
  692. <6>[ 31.114249] adb_open
  693. <6>[ 31.205843] android_work: android_work: Normal Cable DISConnect
  694. <6>[ 31.206119] android_work: android_work: sent uevent USB_STATE=CONNECTED
  695. <6>[ 31.329156] android_usb gadget: high-speed config #1: android
  696. <6>[ 31.335353] msm_batt_update_psy_status: enter
  697. <6>[ 31.337776] BATT: same event count = 1
  698. <6>[ 31.386448] android_work: android_work: Normal Cable DISConnect
  699. <6>[ 31.386704] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  700. <6>[ 32.409559] msm_batt_update_psy_status: enter
  701. <6>[ 32.412218] BATT: rcvd: 0, 2, 0, 2; 4009, 200, 78, 488
  702. <7>[ 32.412343] BATT: In charging
  703. <7>[ 32.412353] BATT: Supply = usb
  704. <6>[ 32.412373] msm_batt_update_psy_status: exit
  705. <6>[ 37.394296] msm_batt_update_psy_status: enter
  706. <6>[ 37.397099] BATT: rcvd: 0, 2, 0, 2; 4008, 200, 78, 487
  707. <7>[ 37.397301] BATT: In charging
  708. <7>[ 37.397311] BATT: Supply = usb
  709. <6>[ 37.397329] msm_batt_update_psy_status: exit
  710. <4>[ 37.732189] adbd (166): /proc/166/oom_adj is deprecated, please use /proc/166/oom_score_adj instead.
  711. <6>[ 42.448649] msm_batt_update_psy_status: enter
  712. <6>[ 42.451309] BATT: rcvd: 0, 2, 0, 2; 4009, 200, 78, 488
  713. <7>[ 42.451514] BATT: In charging
  714. <7>[ 42.451526] BATT: Supply = usb
  715. <6>[ 42.451544] msm_batt_update_psy_status: exit
  716. <6>[ 42.802006] mtp_release
  717. <6>[ 42.802169] mtp_open
  718. <6>[ 42.802348] android_work: android_work: Normal Cable DISConnect
  719. <6>[ 42.802594] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  720. <6>[ 42.802996] adb_release
  721. <6>[ 42.803238] adb_open
  722. <4>[ 42.803859] sh used greatest stack depth: 5688 bytes left
  723. <6>[ 42.890144] android_work: android_work: Normal Cable DISConnect
  724. <6>[ 42.890408] android_work: android_work: sent uevent USB_STATE=CONNECTED
  725. <6>[ 43.019886] android_usb gadget: high-speed config #1: android
  726. <6>[ 43.025691] msm_batt_update_psy_status: enter
  727. <6>[ 43.027918] BATT: same event count = 1
  728. <6>[ 43.076454] android_work: android_work: Normal Cable DISConnect
  729. <6>[ 43.076618] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  730. <6>[ 45.228473] android_work: android_work: Normal Cable DISConnect
  731. <6>[ 45.228659] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  732. <6>[ 45.228981] mtp_release
  733. <6>[ 45.229233] mtp_open
  734. <6>[ 45.229469] adb_release
  735. <6>[ 45.229761] adb_open
  736. <6>[ 45.314463] android_work: android_work: Normal Cable DISConnect
  737. <6>[ 45.314648] android_work: android_work: sent uevent USB_STATE=CONNECTED
  738. <6>[ 45.419399] msm_batt_update_psy_status: enter
  739. <6>[ 45.421614] BATT: rcvd: 0, 2, 0, 2; 4008, 200, 78, 487
  740. <7>[ 45.421813] BATT: In charging
  741. <7>[ 45.421823] BATT: Supply = usb
  742. <6>[ 45.421843] msm_batt_update_psy_status: exit
  743. <3>[ 46.029484] msm_hsusb msm_hsusb: usb_ept_queue_xfer: called for disabled endpoint
  744. <6>[ 46.029709] mtp_release
  745. <6>[ 46.029861] mtp_open
  746. <3>[ 46.830091] msm_hsusb msm_hsusb: usb_ept_queue_xfer: called for disabled endpoint
  747. <6>[ 46.830319] mtp_release
  748. <6>[ 46.830458] mtp_open
  749. <6>[ 47.432496] msm_batt_update_psy_status: enter
  750. <6>[ 47.435088] BATT: rcvd: 0, 2, 0, 2; 4010, 200, 78, 487
  751. <7>[ 47.435211] BATT: In charging
  752. <7>[ 47.435223] BATT: Supply = usb
  753. <6>[ 47.435241] msm_batt_update_psy_status: exit
  754. <3>[ 47.630689] msm_hsusb msm_hsusb: usb_ept_queue_xfer: called for disabled endpoint
  755. <6>[ 47.630836] mtp_release
  756. <6>[ 47.630974] mtp_open
  757. <3>[ 48.431274] msm_hsusb msm_hsusb: usb_ept_queue_xfer: called for disabled endpoint
  758. <6>[ 48.431419] mtp_release
  759. <6>[ 48.431553] mtp_open
  760. <3>[ 49.231843] msm_hsusb msm_hsusb: usb_ept_queue_xfer: called for disabled endpoint
  761. <6>[ 49.231986] mtp_release
  762. <6>[ 49.232191] mtp_open
  763. <3>[ 50.032399] msm_hsusb msm_hsusb: usb_ept_queue_xfer: called for disabled endpoint
  764. <6>[ 50.032566] mtp_release
  765. <6>[ 50.032778] mtp_open
  766. <3>[ 50.832994] msm_hsusb msm_hsusb: usb_ept_queue_xfer: called for disabled endpoint
  767. <6>[ 50.833141] mtp_release
  768. <6>[ 50.833353] mtp_open
  769. <6>[ 50.936301] android_usb gadget: high-speed config #1: android
  770. <6>[ 50.996441] android_work: android_work: Normal Cable DISConnect
  771. <6>[ 50.996674] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  772. <6>[ 51.050654] msm_batt_update_psy_status: enter
  773. <6>[ 51.052946] BATT: rcvd: 0, 2, 0, 2; 4008, 200, 78, 485
  774. <7>[ 51.053071] BATT: In charging
  775. <7>[ 51.053083] BATT: Supply = usb
  776. <6>[ 51.053101] msm_batt_update_psy_status: exit
  777. <6>[ 70.086444] mipi_hx8379a_chip_lcd_off START
  778. <4>[ 70.226801] mipi_ldp_lcd_hx8379a_panel_poweroff start
  779. <4>[ 70.226813] mipi_ldp_lcd_hx8379a_panel_poweroff LCD_RESET low..
  780. <4>[ 70.256426] mipi_ldp_lcd_hx8379a_panel_poweroff end
  781. <6>[ 92.295241] msm_batt_update_psy_status: enter
  782. <6>[ 92.297828] BATT: rcvd: 0, 2, 0, 2; 4050, 200, 78, 486
  783. <7>[ 92.297951] BATT: In charging
  784. <7>[ 92.297961] BATT: Supply = usb
  785. <6>[ 92.297981] msm_batt_update_psy_status: exit
  786. <6>[ 240.627744] [Touch] 1 finger pressed : <0> x[ 580] y[1297]
  787. <4>[ 240.656503] mipi_dsi_panel_power hx8379a start
  788. <4>[ 240.676551] mipi_dsi_panel_power RESET of off start
  789. <6>[ 240.693373] [Touch] touch_release[] : <0> x[ 591] y[1305]
  790. <4>[ 240.736426] mipi_dsi_panel_power hx8379a end
  791. <4>[ 240.738893] mipi_hx8379a_lcd_on START
  792. <4>[ 241.006426] mipi_hx8379a_lcd_on FINISH
  793. <6>[ 241.832549] [Touch] 1 finger pressed : <0> x[ 313] y[1621]
  794. <6>[ 242.113216] msm_batt_update_psy_status: enter
  795. <6>[ 242.115606] BATT: rcvd: 0, 2, 0, 2; 4015, 200, 79, 486
  796. <7>[ 242.115623] BATT: In charging
  797. <7>[ 242.115631] BATT: Supply = usb
  798. <6>[ 242.115653] msm_batt_update_psy_status: exit
  799. <6>[ 242.132576] [Touch] touch_release[] : <0> x[1073] y[1578]
  800. <6>[ 242.186113] [msm_vibrator] vibrator_enable, value : 80
  801. <7>[ 242.186256] pmic_rpc_req_reply: successfully connected to 0x60001 rpc version
  802. <6>[ 242.447999] [Touch] 1 finger pressed : <0> x[ 339] y[1189]
  803. <6>[ 242.448649] [msm_vibrator] vibrator_enable, value : 80
  804. <6>[ 242.489916] [Touch] touch_release[] : <0> x[ 339] y[1189]
  805. <6>[ 243.217234] [Touch] 1 finger pressed : <0> x[ 400] y[ 630]
  806. <6>[ 243.259034] [Touch] touch_release[] : <0> x[ 400] y[ 630]
  807. <6>[ 243.364079] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts:
  808. <7>[ 243.364246] SELinux: initialized (dev mmcblk0p14, type ext4), uses xattr
  809. <6>[ 243.364513] [msm_vibrator] vibrator_enable, value : 80
  810. <6>[ 244.310806] [Touch] 1 finger pressed : <0> x[ 287] y[1888]
  811. <6>[ 244.311498] [msm_vibrator] vibrator_enable, value : 80
  812. <6>[ 244.395523] [Touch] touch_release[] : <0> x[ 287] y[1888]
  813. <6>[ 244.729643] [Touch] 1 finger pressed : <0> x[ 301] y[1533]
  814. <6>[ 244.730288] [msm_vibrator] vibrator_enable, value : 80
  815. <6>[ 244.780016] [Touch] touch_release[] : <0> x[ 301] y[1533]
  816. <6>[ 245.097108] [Touch] 1 finger pressed : <0> x[ 837] y[ 915]
  817. <6>[ 245.097758] [msm_vibrator] vibrator_enable, value : 80
  818. <6>[ 245.180666] [Touch] touch_release[] : <0> x[ 842] y[ 917]
  819. <6>[ 245.333349] msm_batt_update_psy_status: enter
  820. <6>[ 245.335594] BATT: rcvd: 0, 2, 0, 2; 4004, 200, 78, 486
  821. <7>[ 245.335796] BATT: In charging
  822. <7>[ 245.335806] BATT: Supply = usb
  823. <6>[ 245.335829] msm_batt_update_psy_status: exit
  824. <6>[ 245.618278] [Touch] 1 finger pressed : <0> x[ 484] y[1274]
  825. <6>[ 245.818783] [Touch] touch_release[] : <0> x[ 557] y[ 923]
  826. <6>[ 246.566726] [Touch] 1 finger pressed : <0> x[ 450] y[ 776]
  827. <6>[ 246.900096] [Touch] touch_release[] : <0> x[ 630] y[1449]
  828. <6>[ 248.172814] [Touch] 1 finger pressed : <0> x[ 424] y[1187]
  829. <6>[ 248.339294] [Touch] touch_release[] : <0> x[ 413] y[ 924]
  830. <6>[ 250.829698] [Touch] 1 finger pressed : <0> x[ 468] y[1071]
  831. <6>[ 250.914149] [Touch] touch_release[] : <0> x[ 468] y[1071]
  832. <6>[ 250.914646] [msm_vibrator] vibrator_enable, value : 80
  833. <6>[ 252.632028] [Touch] 1 finger pressed : <0> x[ 367] y[ 564]
  834. <6>[ 252.765758] [Touch] touch_release[] : <0> x[ 366] y[ 555]
  835. <6>[ 252.767551] [msm_vibrator] vibrator_enable, value : 80
  836. <6>[ 253.178639] [Touch] 1 finger pressed : <0> x[ 526] y[1269]
  837. <6>[ 253.528806] [Touch] touch_release[] : <0> x[ 522] y[ 928]
  838. <6>[ 253.819308] [Touch] 1 finger pressed : <0> x[ 480] y[1314]
  839. <6>[ 254.069068] [Touch] touch_release[] : <0> x[ 514] y[ 965]
  840. <6>[ 254.878543] [Touch] 1 finger pressed : <0> x[ 465] y[1357]
  841. <6>[ 255.078318] [Touch] touch_release[] : <0> x[ 469] y[1074]
  842. <6>[ 255.664274] [Touch] 1 finger pressed : <0> x[ 391] y[1408]
  843. <6>[ 255.747374] [Touch] touch_release[] : <0> x[ 427] y[1130]
  844. <6>[ 256.099869] [Touch] 1 finger pressed : <0> x[ 502] y[1021]
  845. <6>[ 256.241964] [Touch] touch_release[] : <0> x[ 477] y[1311]
  846. <6>[ 260.087258] [Touch] 1 finger pressed : <0> x[ 312] y[ 909]
  847. <6>[ 260.320236] [Touch] touch_release[] : <0> x[ 430] y[1262]
  848. <6>[ 261.359623] [Touch] 1 finger pressed : <0> x[ 369] y[1383]
  849. <6>[ 261.659483] [Touch] touch_release[] : <0> x[ 383] y[1203]
  850. <6>[ 262.521101] [Touch] 1 finger pressed : <0> x[ 249] y[ 991]
  851. <6>[ 262.580031] [Touch] touch_release[] : <0> x[ 249] y[ 991]
  852. <6>[ 262.580528] [msm_vibrator] vibrator_enable, value : 80
  853. <6>[ 263.315239] [Touch] 1 finger pressed : <0> x[ 327] y[1340]
  854. <6>[ 263.381349] [Touch] touch_release[] : <0> x[ 340] y[1054]
  855. <6>[ 264.126988] [Touch] 1 finger pressed : <0> x[ 443] y[1329]
  856. <6>[ 264.175989] [Touch] touch_release[] : <0> x[ 458] y[1079]
  857. <6>[ 264.690096] [Touch] 1 finger pressed : <0> x[ 629] y[1358]
  858. <6>[ 264.806503] [Touch] touch_release[] : <0> x[ 660] y[1052]
  859. <6>[ 265.416004] [Touch] 1 finger pressed : <0> x[ 551] y[1311]
  860. <6>[ 265.499026] [Touch] touch_release[] : <0> x[ 515] y[ 938]
  861. <6>[ 265.962524] [Touch] 1 finger pressed : <0> x[1061] y[ 965]
  862. <6>[ 266.506063] [Touch] touch_release[] : <0> x[1085] y[1773]
  863. <6>[ 267.192089] [Touch] 1 finger pressed : <0> x[ 502] y[1393]
  864. <6>[ 267.392013] [Touch] touch_release[] : <0> x[ 569] y[ 883]
  865. <6>[ 267.738583] [Touch] 1 finger pressed : <0> x[ 500] y[ 862]
  866. <6>[ 268.156401] [Touch] touch_release[] : <0> x[ 542] y[1270]
  867. <6>[ 268.823036] [Touch] 1 finger pressed : <0> x[ 475] y[ 993]
  868. <6>[ 269.123234] [Touch] touch_release[] : <0> x[ 441] y[1335]
  869. <6>[ 269.403594] [Touch] 1 finger pressed : <0> x[ 496] y[1202]
  870. <6>[ 269.713009] [Touch] touch_release[] : <0> x[ 473] y[1639]
  871. <6>[ 273.193333] [Touch] 1 finger pressed : <0> x[ 424] y[1020]
  872. <6>[ 273.443288] [Touch] touch_release[] : <0> x[ 405] y[1376]
  873. <6>[ 275.336336] [Touch] 1 finger pressed : <0> x[ 261] y[1020]
  874. <6>[ 275.420593] [Touch] touch_release[] : <0> x[ 261] y[1020]
  875. <6>[ 275.421981] [msm_vibrator] vibrator_enable, value : 80
  876. <6>[ 276.540131] [Touch] 1 finger pressed : <0> x[ 354] y[1255]
  877. <6>[ 276.541034] [msm_vibrator] vibrator_enable, value : 80
  878. <6>[ 276.590764] [Touch] touch_release[] : <0> x[ 354] y[1255]
  879. <6>[ 277.393849] [Touch] 1 finger pressed : <0> x[ 480] y[1245]
  880. <6>[ 277.643826] [Touch] touch_release[] : <0> x[ 566] y[ 924]
  881. <6>[ 278.503709] [Touch] 1 finger pressed : <0> x[ 292] y[1096]
  882. <6>[ 278.587871] [Touch] touch_release[] : <0> x[ 292] y[1096]
  883. <6>[ 278.588279] [msm_vibrator] vibrator_enable, value : 80
  884. <6>[ 279.024389] [Touch] 1 finger pressed : <0> x[1015] y[1642]
  885. <6>[ 279.025018] [msm_vibrator] vibrator_enable, value : 80
  886. <6>[ 279.091826] [Touch] touch_release[] : <0> x[1015] y[1642]
  887. <6>[ 279.621998] [Touch] 1 finger pressed : <0> x[ 260] y[1545]
  888. <6>[ 279.905134] [Touch] touch_release[] : <0> x[1029] y[1614]
  889. <6>[ 279.909793] [msm_vibrator] vibrator_enable, value : 80
  890. <6>[ 282.304624] msm_batt_update_psy_status: enter
  891. <6>[ 282.307399] BATT: rcvd: 0, 2, 0, 2; 3996, 200, 78, 485
  892. <7>[ 282.307563] BATT: In charging
  893. <7>[ 282.307574] BATT: Supply = usb
  894. <6>[ 282.307596] msm_batt_update_psy_status: exit
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!