Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Booting Linux on physical CPU 0x100
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <6>[ 0.000000] Initializing cgroup subsys cpuacct
- <5>[ 0.000000] Linux version 3.10.9 (bigbiff@nas) (gcc version 4.7 (GCC) ) #2 SMP PREEMPT Wed Nov 5 18:33:23 EST 2014
- <4>[ 0.000000] CPU: ARMv7 Processor [410fd031] revision 1 (ARMv7), cr=10c5387d
- <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <6>[ 0.000000] Machine: Samsung EXYNOS5433, model: Samsung TR LTE EUR EVT1 board based on EXYNOS5433
- <6>[ 0.000000] tima :sec_tima_log_eary_setup, base:26202000, size:200000
- <6>[ 0.000000] ION: Contiguous 0x400000 bytes @ 0x0 defined for 0:common
- <6>[ 0.000000] ION: Contiguous 0x100000 bytes @ 0x0 defined for 2:mfc_sh
- <6>[ 0.000000] ION: Contiguous 0x800000 bytes @ 0x0 defined for 10:g2d_wfd
- <6>[ 0.000000] ION: Contiguous 0xa800000 bytes @ 0x0 defined for 11:video
- <6>[ 0.000000] ION: Contiguous 0x100000 bytes @ 0x0 defined for 9:sectbl
- <6>[ 0.000000] ION: Contiguous 0x100000 bytes @ 0x0 defined for 8:mfc_fw
- <6>[ 0.000000] ION: Contiguous 0x100000 bytes @ 0x0 defined for 12:mfc_nfw
- <6>[ 0.000000] ION: Contiguous 0x20000 bytes @ 0x0 defined for 13:secdma
- <6>[ 0.000000] cma: CMA: reserved 4 MiB at df200000
- <6>[ 0.000000] cma: CMA: reserved 1 MiB at df100000
- <6>[ 0.000000] cma: CMA: reserved 8 MiB at de900000
- <6>[ 0.000000] cma: CMA: reserved 168 MiB at d4100000
- <6>[ 0.000000] cma: CMA: reserved 1 MiB at d4000000
- <6>[ 0.000000] cma: CMA: reserved 1 MiB at d3f00000
- <6>[ 0.000000] cma: CMA: reserved 1 MiB at d3e00000
- <6>[ 0.000000] cma: CMA: reserved 0 MiB at df660000
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <6>[ 0.000000] create_mapping_memory: section: 20000000 ~ 47000000
- <4>[ 0.000000] CPU EXYNOS5433 (id 0xe5433311)
- <0>[ 0.000000] (sec_debug_set_upload_magic) 66262564
- <0>[ 0.000000] (sec_debug_set_upload_cause) cafebabe
- <7>[ 0.000000] On node 0 totalpages: 784000
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c0eae240, node_mem_map c23f6000
- <7>[ 0.000000] Normal zone: 1248 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 159744 pages, LIFO batch:31
- <7>[ 0.000000] HighMem zone: 4877 pages used for memmap
- <7>[ 0.000000] HighMem zone: 624256 pages, LIFO batch:31
- <6>[ 0.000000] sec_debug_magic_init: success reserving magic code area
- <6>[ 0.000000] PERCPU: Embedded 9 pages/cpu @c3c2e000 s13568 r8192 d15104 u36864
- <7>[ 0.000000] pcpu-alloc: s13568 r8192 d15104 u36864 alloc=9*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 782752
- <5>[ 0.000000] Kernel command line: console=ram loglevel=4 bootmode=2 sec_debug.level=0 sec_watchdog.sec_pet=5 printk.core_num=1 androidboot.debug_level=0x4f4c sec_log=0x200000@0x26000000 androidboot.security_mode=1526595584 androidboot.hw_rev=21 sec_tima_log=0x200000@0x26202000 sec_avc_log=0x40000@0x26404000 s3cfb.bootloaderfb=0x67000000 sysscope=0xb2cecb79 lcdtype=5251081 consoleblank=0 vmalloc=384m ehci_hcd.park=3 oops=panic pmic_info=35 cordon=126b41cd9a5ec8f30082208f3659aff6 connie=SM-N910C_JT_MEA_8c4490273621209b44bcde0b38ff7e98 androidboot.emmc_checksum=3 androidboot.boot_salescode= androidboot.odin_download=1 androidboot.bootloader=N910CXXS2DQF1 androidboot.selinux=enforcing androidboot.hardware=universal5433 androidboot.warranty_bit=1 androidboot.sec_atd.tty=/dev/ttySAC1 androidboot.serialno=410040f4e40da115 snd_soc_core.pmdown_time=1000
- <3>[ 0.000000] [c0] sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:51cf03 sec_log_buf:fd200000 sec_log_size:2097152
- <6>[ 0.000000] [c0] sec_log_save_old: saved old log at 262144@c3c76200
- <6>[ 0.000000] [c0] sec_getlog_supply_kloginfo: 0xc6000000
- <6>[ 0.000000] [c0] sec_avc_log_setup: *sec_avc_log_ptr:bccd sec_avc_log_buf:c6404000 sec_log_size:0x40000
- <6>[ 0.000000] [c0] lcdtype_setup: lcdtype: 502009
- <6>[ 0.000000] [c0] muic-max77843:set_switch_sel switch_sel: 0x023
- <6>[ 0.000000] [c0] PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.000000] [c0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>[ 0.000000] [c0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] [c0] Memory: 3062MB = 3062MB total
- <5>[ 0.000000] [c0] Memory: 2895544k/2895544k available, 240456k reserved, 2308480K highmem
- <5>[ 0.000000] [c0] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .text : 0xc0008000 - 0xc0cc9f54 (13064 kB)
- <5>[ 0.000000] .init : 0xc0cca000 - 0xc0d3b500 ( 454 kB)
- <5>[ 0.000000] .data : 0xc0d3c000 - 0xc0eb4d58 (1508 kB)
- <5>[ 0.000000] .bss : 0xc0eb4d58 - 0xc10cb2d4 (2138 kB)
- <6>[ 0.000000] [c0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- <6>[ 0.000000] [c0] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] [c0] NR_IRQS:16 nr_irqs:16 16
- <3>[ 0.000000] [c0] samsung_clk_register_mux: failed to register clock mout_sclk_usbhost30
- <6>[ 0.000000] [c0] [g2d_init_clock:96] aclk_g2d_400:400000000, aclk_g2d_266:266666666
- <6>[ 0.000000] [c0] Exynos5433: Clock setup completed
- <6>[ 0.000000] [c0] Exynos: pwm: clock setup completed
- <6>[ 0.000000] [c0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- <6>[ 0.000000] [c0] Switching to timer-based delay loop
- <6>[ 0.000000] [c0] EXYNOS5433 PMU Initialize
- <6>[ 0.000000] [c0] Enable Console Clock to add refference counter
- <3>[ 0.000000] [c0] Can't get console-pclk1!(it''t write reg
- <6>[ 0.856346] [c7] muic-max77843-hv:max77843_afc_muic_irq_init
- <6>[ 0.859255] [c7] muic-max77843-hv:max77843_afc_muic_irq_init vdnmon(546), mrxrdy(552), mpnack(548), vbadc(545)
- <6>[ 0.859266] [c7] muic-max77843:max77843_muic_irq_init
- <6>[ 0.862765] [c7] muic-max77843:max77843_muic_irq_init adc1k(555), adcerr(554), adc(553), chgtyp(556), vbvolt(560)
- <6>[ 0.862776] [c7] muic-max77843-hv:max77843_hv_muic_initialize
- <6>[ 0.862958] [c7] muic-max77843:max77843_muic_init_detect
- <6>[ 0.863187] [c7] muic-max77843:max77843_muic_detect_dev STATUS1:0x1f, 2:0x00, 3:0x00
- <6>[ 0.863392] [c7] muic-max77843:max77843_muic_detect_dev HVCONTROL1:0x00, 2:0x00
- <6>[ 0.863404] [c7] muic-max77843:max77843_muic_detect_dev adc1k:0x0 adcerr:0x0 adc:0x1f vb:0x0 chgdetrun:0x0 chgtyp:0x0
- <6>[ 0.863414] [c7] muic-max77843:max77843_muic_detect_dev vdnmon:0x0 mpnack:0x0 vbadc:0x0 dpdnvden:0x0
- <6>[ 0.863426] [c7] muic-max77843:max77843_muic_detect_dev 51->51
- <6>[ 0.863435] [c7] muic-max77843:is_need_muic_adcmode_continuous (51)F
- <6>[ 0.863445] [c7] muic-max77843:is_need_muic_adcmode_2s_pulse ADC:0x1f (F)
- <6>[ 0.863629] [c7] muic-max77843:max77843_muic_adcmode_switch ADC Mode is already One Shot + Low lp Disconnect Detect(2), just return
- <6>[ 0.863640] [c7] muic-max77843:max77843_muic_detect_dev DETACHED
- <6>[ 0.863824] [c7] muic-max77843:max77843_muic_update_reg REG(0x0d): already [0x3b], don't write reg
- <6>[ 0.863834] [c7] muic-max77843:max77843_muic_set_afc_ready afc_muic_ready[0->0]
- <6>[ 0.863845] [c7] muic-max77843:muic_lookup_vps_table can't find (51) on vps table
- <6>[ 0.863854] [c7] muic_notifier_detach_attached_dev: (51)
- <6>[ 0.863863] [c7] muic_notifier_notify: CMD=0, DATA=51
- <6>[ 0.863873] [c7] muic_handle_dock_notification: ignore(51)
- <6>[ 0.863882] [c7] muic_notifier_notify: notify done(0x0)
- <6>[ 0.864065] [c7] muic-max77843:max77843_muic_update_reg REG(0x0c): already [0x00], don't write reg
- <6>[ 0.870607] [c7] brd: module loaded
- <6>[ 0.874065] [c7] loop: module loaded
- <7>[ 0.874833] [c7] of_get_named_gpio_flags exited with status 195
- <6>[ 0.875217] [c7] dmverity_odin_flag_read_init:: Registering /proc/dmverity_odin_flag Interface
- <7>[ 0.886004] [c7] of_get_named_gpio_flags exited with status 157
- <7>[ 0.886222] [c7] of_get_named_gpio_flags exited with status 128
- <6>[ 0.886376] [c7] LDO1: at 1200 mV
- <6>[ 0.886425] [c7] LDO1: supplied by V_CODEC_1.8V_AP
- <6>[ 0.912341] [c7] arizona spi1.0: WM5110 revision E
- <6>[ 0.918060] [c7] MICVDD: 900 <--> 3300 mV at 2500 mV
- <6>[ 0.918113] [c7] MICVDD: supplied by V_CODEC_1.8V_AP
- <7>[ 0.918600] [c7] gpiochip_find_base: found new base at 352
- <7>[ 0.918743] [c7] gpiochip_add: registered GPIOs 352 to 356 on device: arizona
- <7>[ 0.919360] [c7] of_get_named_gpio_flags exited with status 44
- <7>[ 0.919379] [c7] of_get_named_gpio_flags exited with status 138
- <7>[ 0.919390] [c7] of_get_named_gpio_flags exited with status 11
- <7>[ 0.919401] [c7] of_get_named_gpio_flags exited with status 0
- <6>[ 0.919410] [c7] sec_nfc_parse_dt: irq : 11, ven : 44, firm : 138
- <6>[ 0.919743] [c7] sclk_isp_sensor1 : 24000000
- <6>[ 0.919753] [c7] sec_nfc_clk_parse_dt(mclk : 24000000)
- <6>[ 0.920395] [c7] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 0.920405] [c7] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 0.920598] [c7] PPP generic driver version 2.4.2
- <6>[ 0.920869] [c7] PPP BSD Compression module registered
- <6>[ 0.920879] [c7] PPP Deflate Compression module registered
- <6>[ 0.920902] [c7] PPP MPPE Compression module registered
- <6>[ 0.920912] [c7] NET: Registered protocol family 24
- <6>[ 0.921035] [c7] usbcore: registered new interface driver asix
- <6>[ 0.921152] [c7] usbcore: registered new interface driver ax88179_178a
- <6>[ 0.921260] [c7] usbcore: registered new interface driver cdc_ether
- <6>[ 0.921368] [c7] usbcore: registered new interface driver smsc9500
- <6>[ 0.921501] [c7] usbcore: registered new interface driver net1080
- <6>[ 0.921608] [c7] usbcore: registered new interface driver cdc_subset
- <6>[ 0.921714] [c7] usbcore: registered new interface driver zaurus
- <7>[ 0.922224] [c4] samsung-usb2phy 15530000.usb2phy: Can't get usb-phy sysreg cfg register
- <7>[ 0.923116] [c4] samsung-usb3phy 15500000.usbphy: Can't get usb-phy sysreg cfg register
- <7>[ 0.923215] [c4] samsung-usb3phy 15580000.usbphy: Can't get usb-phy sysreg cfg register
- <6>[ 0.924218] [c4] exynos-dwc3 15400000.usb: failed to configure pins
- <7>[ 0.924675] [c4] samsung-usb3phy 15500000.usbphy: end of samsung_usb3phy_init
- <6>[ 1.124957] [c4] samsung-usb3phy 15500000.usbphy: set phyparam0 = 0x27d5e7e4
- <3>[ 1.125020] [c4] dwc3 15400000.dwc3: dwc3_otg address space is not supported
- <6>[ 1.125044] [c4] dwc3 15400000.dwc3: vbus regulator is not available
- <7>[ 1.125070] [c4] samsung-usb3phy 15500000.usbphy: end of samsung_usb3phy_shutdown
- <3>[ 1.125441] [c4] dwc3 15400000.dwc3: Binding gadget dwc3-gadget
- <6>[ 1.125550] [c6] usb_notify: ovc_init
- <6>[ 1.125561] [c6] usb_notify: get_usb_mode usb mode=0
- <7>[ 1.125573] [c6] usb: dwc3_otg_statemachine fsm->reset:0, phy->state:0, fsm->id: 1, fsm->b_sess_vld:0
- <7>[ 1.125584] [c6] usb: dwc3_otg_statemachine fsm->reset:0, phy->state:1, fsm->id: 1, fsm->b_sess_vld:0
- <6>[ 1.126035] [c7] exynos-dwc3 15a00000.usb: failed to configure pins
- <7>[ 1.126437] [c7] samsung-usb3phy 15580000.usbphy: end of samsung_usb3phy_init
- <6>[ 1.326705] [c7] samsung-usb3phy 15580000.usbphy: set phyparam0 = 0x27d5e7e4
- <3>[ 1.329495] [c7] dwc3 15a00000.dwc3: dwc3_otg address space is not supported
- <6>[ 1.329515] [c7] dwc3 15a00000.dwc3: vbus regulator is not available
- <7>[ 1.329540] [c7] samsung-usb3phy 15580000.usbphy: end of samsung_usb3phy_shutdown
- <3>[ 1.329784] [c7] dwc3 15a00000.dwc3: Binding gadget dwc3-gadget
- <6>[ 1.329796] [c7] usb_notify: get_usb_mode usb mode=0
- <7>[ 1.329807] [c7] usb: dwc3_otg_statemachine fsm->reset:0, phy->state:0, fsm->id: 1, fsm->b_sess_vld:0
- <7>[ 1.329818] [c7] usb: dwc3_otg_statemachine fsm->reset:0, phy->state:1, fsm->id: 1, fsm->b_sess_vld:0
- <6>[ 1.330236] [c7] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <7>[ 1.330248] [c7] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
- <6>[ 1.330266] [c7] ehci-pci: EHCI PCI platform driver
- <6>[ 1.330386] [c7] ehci-s5p: EHCI s5p driver
- <3>[ 1.330621] [c7] s5p-ehci 15510000.usb: can not find l2-retention value
- <7>[ 1.330662] [c7] samsung-usb2phy 15530000.usb2phy: Can't configure specified phy mode
- <6>[ 1.330801] [c7] samsung_usb2phy_init: usage=0, child=0
- <7>[ 1.330811] [c7] samsung-usb2phy 15530000.usb2phy: end of samsung_usb2phy_init
- <7>[ 1.330823] [c7] samsung-usb2phy 15530000.usb2phy: samsung_usb2phy_runtime_resume
- <6>[ 1.330891] [c7] samsung_usb2phy_runtime_resume: usage=1, child=0
- <6>[ 1.330902] [c7] s5p-ehci 15510000.usb: EHCI Host Controller
- <6>[ 1.330923] [c7] s5p-ehci 15510000.usb: new USB bus registered, assigned bus number 1
- <7>[ 1.330944] [c7] s5p-ehci 15510000.usb: reset hcs_params 0x1212 dbg=0 cc=1 pcc=2 ordered ports=2
- <7>[ 1.330958] [c7] s5p-ehci 15510000.usb: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
- <7>[ 1.330997] [c7] s5p-ehci 15510000.usb: park 3
- <7>[ 1.331018] [c7] s5p-ehci 15510000.usb: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- <6>[ 1.331042] [c7] s5p-ehci 15510000.usb: irq 262, io mem 0x15510000
- <7>[ 1.331058] [c7] s5p-ehci 15510000.usb: init command 0010b05 park=3 ithresh=1 period=512 RUN
- <6>[ 1.336849] [c7] s5p-ehci 15510000.usb: USB 2.0 started, EHCI 1.00
- <7>[ 1.336921] [c7] usb usb1: default language 0x0409
- <7>[ 1.336946] [c7] usb usb1: udev 1, busnum 1, minor = 0
- <6>[ 1.336958] [c7] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 1.336969] [c7] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 1.336979] [c7] usb usb1: Product: EHCI Host Controller
- <6>[ 1.336989] [c7] usb usb1: Manufacturer: Linux 3.10.9 ehci_hcd
- <6>[ 1.336999] [c7] usb usb1: SerialNumber: 15510000.usb
- <7>[ 1.337333] [c7] usb usb1: usb_probe_device
- <7>[ 1.337346] [c7] usb usb1: configuration #1 chosen from 1 choice
- <7>[ 1.337370] [c7] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[ 1.337527] [c7] hub 1-0:1.0: usb_probe_interface
- <7>[ 1.337539] [c7] hub 1-0:1.0: usb_probe_interface - got id
- <6>[ 1.337552] [c7] hub 1-0:1.0: USB hub found
- <6>[ 1.337569] [c7] hub 1-0:1.0: 2 ports detected
- <7>[ 1.337579] [c7] hub 1-0:1.0: standalone hub
- <7>[ 1.337589] [c7] hub 1-0:1.0: individual port power switching
- <7>[ 1.337598] [c7] hub 1-0:1.0: individual port over-current protection
- <7>[ 1.337608] [c7] hub 1-0:1.0: power on to power good time: 20ms
- <7>[ 1.337620] [c7] usb usb1: (0)send start USB_REQ_GET_STATUS
- <7>[ 1.337633] [c7] usb usb1: (0)send start USB_REQ_GET_STATUS
- <7>[ 1.337647] [c7] hub 1-0:1.0: local power source is good
- <7>[ 1.337712] [c7] hub 1-0:1.0: enabling power on all ports
- <6>[ 1.338413] [c7] usbcore: registered new interface driver usblp
- <6>[ 1.338544] [c7] usbcore: registered new interface driver usb-storage
- <6>[ 1.338778] [c7] usbcore: registered new interface driver usbserial
- <6>[ 1.338891] [c7] usbcore: registered new interface driver pl2303
- <6>[ 1.339000] [c7] usbserial: USB Serial support registered for pl2303
- <6>[ 1.339753] [c7] mousedev: PS/2 mouse device common for all mice
- <7>[ 1.340178] [c7] of_get_named_gpio_flags exited with status 148
- <7>[ 1.340194] [c7] of_get_named_gpio_flags exited with status 147
- <7>[ 1.340205] [c7] of_get_named_gpio_flags exited with status 26
- <3>[ 1.340216] [c7] touchkey:failed to read fw_path -22
- <6>[ 1.340227] [c7] sec_touchkey_driver 7-0020: touchkey:fw path cypress/cypress_t.fw
- <6>[ 1.340425] [c7] input: sec_touchkey as /devices/14da0000.hsi2c/i2c-7/7-0020/input/input1
- <7>[ 1.340663] [c7] touchkey_pinctrl_init: use dev's parent
- <6>[ 1.340678] [c7] sec_touchkey_driver 7-0020: touchkey_power_on: on
- <6>[ 1.340905] sec_touchkey_driver 7-0020: touchkey_led_power_on: on
- <3>[ 1.341169] sec_touchkey_driver 7-0020: LCD type Print : 0x502009
- <6>[ 1.341964] [c5] sec_touchkey_driver 7-0020: touchkey:fw path loaded cypress/cypress_t.fw
- <6>[ 1.341978] [c5] sec_touchkey_driver 7-0020: fw ver 0x12, new fw ver 0xe
- <6>[ 1.341990] [c5] sec_touchkey_driver 7-0020: module ver 0x6, new module ver 0x6
- <6>[ 1.342002] [c5] sec_touchkey_driver 7-0020: checkksum 0xc59c, new checksum 0x7e66
- <6>[ 1.342013] [c5] sec_touchkey_driver 7-0020: pass fw update
- <6>[ 1.342387] [c5] fts_touch 4-0049: FTS Driver [120132] Oct 30 2014 20:52:36
- <7>[ 1.342402] [c5] of_get_named_gpio_flags exited with status 9
- <6>[ 1.342457] [c5] fts_touch 4-0049: irq :9, irq_type: 0x2008, max[x,y]: [1439,2559], project/model_name: TR/N910, panel_revision: 2, lcdtype: 0x502009
- <6>[ 1.342517] [c5] fts_touch 4-0049: FTS Support Hover Event
- <6>[ 1.342581] [c5] fts_touch 4-0049: fts_power_ctrl: on
- <6>[ 1.348262] [c5] fts_touch 4-0049: FTS SystemReset
- <6>[ 1.382185] [c5] fts_touch 4-0049: fts_wait_for_ready: 10, 03, 01, 14, 24, 33, 2E, 00
- <6>[ 1.382291] [c5] fts_touch 4-0049: FTS Command (AA) , ret = 1
- <6>[ 1.382988] [c5] fts_touch 4-0049: IC Firmware Version : 0x1424 IC Config Version : 0x2E33 IC Main Version : 0x2C82
- <6>[ 1.383367] [c5] fts_touch 4-0049: FTS B60007 = 39 6C 03 24 14 01
- <6>[ 1.383380] [c5] fts_touch 4-0049: fts_fw_update_on_probe: Load firmware : tsp_stm/stm_t.fw, Digital_rev : 2
- <6>[ 1.383393] [c5] fts_touch 4-0049: Bin Firmware Version : 0x1401 Bin Config Version : 0x2E2A Bin Main Version : 0x2985
- <6>[ 1.384748] [c5] fts_touch 4-0049: fts_get_system_status: System Status 1 : 0x11
- <6>[ 1.385100] [c5] fts_touch 4-0049: fts_get_system_status: System Status 2 : 0x11
- <6>[ 1.385204] [c5] fts_touch 4-0049: FTS Command (91) , ret = 1
- <6>[ 1.385306] [c5] fts_touch 4-0049: FTS Command (93) , ret = 1
- <6>[ 1.434404] [c5] fts_touch 4-0049: FTS Sense(32) Force(18)
- <6>[ 1.434519] [c5] fts_touch 4-0049: FTS Command (A2) , ret = 1
- <6>[ 1.434632] [c5] fts_touch 4-0049: FTS Command (A1) , ret = 1
- <6>[ 1.434642] [c5] fts_touch 4-0049: FTS INT Enable
- <6>[ 1.435091] [c5] fts_touch 4-0049: FTS ReadStatus(0x84) : 0A 00 00 00
- <6>[ 1.435101] [c5] fts_touch 4-0049: FTS Initialized
- <6>[ 1.435327] [c5] input: sec_touchscreen as /devices/14ed0000.hsi2c/i2c-4/4-0049/input/input2
- <7>[ 1.436106] [c5] of_get_named_gpio_flags exited with status 59
- <7>[ 1.436120] [c5] of_get_named_gpio_flags exited with status 60
- <7>[ 1.436132] [c5] of_get_named_gpio_flags exited with status 65
- <7>[ 1.436143] [c5] of_get_named_gpio_flags exited with status 14
- <7>[ 1.436154] [c5] epen:theres no prop wacom,reset-gpio
- <7>[ 1.436172] [c5] epen:int type 2
- <7>[ 1.436837] [c7] usb usb1: (1)send start USB_REQ_GET_STATUS
- <7>[ 1.436858] [c7] usb usb1: (2)send start USB_REQ_GET_STATUS
- <7>[ 1.436900] [c4] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
- <7>[ 1.436952] [c0] hub 1-0:1.0: hub_suspend
- <7>[ 1.436992] [c0] usb usb1: bus auto-suspend, wakeup 1
- <7>[ 1.437005] [c0] s5p-ehci 15510000.usb: suspend root hub
- <7>[ 1.437068] [c0] usb usb1: usb_suspend_both: status 0
- <7>[ 1.437090] [c0] s5p-ehci 15510000.usb: s5p_ehci_runtime_suspend
- <6>[ 1.437502] [c5] epen:wacom_i2c_query: 0th ret of wacom query=28
- <5>[ 1.437515] [c5] epen:F, 31, 0, 1B, 90, 7, FF, 2, 39, 2D, 13, 2D, 2D, FF
- <5>[ 1.437525] [c5] epen:q max_x=12544 max_y=7056, max_pressure=2047
- <5>[ 1.437534] [c5] epen:p max_x=12544 max_y=7056, max_pressure=2047
- <5>[ 1.437543] [c5] epen:fw_version=0x239 (d7:0x2,d8:0x39)
- <5>[ 1.437553] [c5] epen:mpu 0x2d, bl 0x13, tx 45, ty 45, h 255
- <6>[ 1.437757] [c5] input: sec_e-pen as /devices/14e60000.hsi2c/i2c-1/1-0056/input/input3
- <7>[ 1.438423] [c5] epen:init irq 531
- <7>[ 1.438523] [c5] epen:init pdct 719
- <7>[ 1.438645] [c5] epen:init sense irq 720
- <6>[ 1.438656] [c5] wake enabled for irq 720
- <7>[ 1.438667] [c5] epen:wacom_fw_update
- <5>[ 1.438677] [c5] epen:wacom fw ver : 0x239, new fw ver : 0x234
- <6>[ 1.441348] [c5] s2m-rtc s2m-rtc: s2m_rtc_enable_wtsr_smpl: WTSR: enable, SMPL: enable
- <6>[ 1.444032] [c5] s2m-rtc s2m-rtc: s2m_rtc_read_time: 2017-07-10 17:33:55(0x02)PM
- <6>[ 1.445301] [c5] s2m-rtc s2m-rtc: s2m_rtc_read_alarm: 2017-07-10 17:22:52(1)
- <6>[ 1.446685] [c5] s2m-rtc s2m-rtc: s2m_rtc_read_time: 2017-07-10 17:33:55(0x02)PM
- <6>[ 1.446946] [c5] s2m-rtc s2m-rtc: rtc core: registered s2m-rtc as rtc0
- <6>[ 1.447426] [c5] i2c /dev entries driver
- <6>[ 1.449677] [c5] mdev_output.2: Media0[0xe5fa5800] was registered successfully
- <6>[ 1.449883] [c5] mdev_capture.3: Media1[0xe5fa5c00] was registered successfully
- <6>[ 1.450320] [c5] PM DOMAIN: spd-gscl0, Device : 13c00000.gsc Registered
- <6>[ 1.450336] [c5] exynos-gsc 13c00000.gsc: exynos-iommu gpd_dev_ops inserted!
- <6>[ 1.450740] [c5] [INFO]gsc_probe:1676: mdev->mdev[0] = 0xe5fa5800, mdev->mdev[1] = 0xe5fa5c00
- <6>[ 1.451214] [c5] exynos-gsc 13c00000.gsc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.451234] [c5] exynos-gsc 13c00000.gsc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- <6>[ 1.451251] [c5] exynos-gsc 13c00000.gsc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- <6>[ 1.451271] [c5] exynos-gsc 13c00000.gsc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- <6>[ 1.451290] [c5] exynos-gsc 13c00000.gsc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- <6>[ 1.451306] [c5] exynos-gsc 13c00000.gsc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <6>[ 1.451446] [c5] [INFO]gsc_probe:1713: gsc-0 registered successfully
- <6>[ 1.451568] [c5] PM DOMAIN: spd-gscl1, Device : 13c10000.gsc Registered
- <6>[ 1.451582] [c5] exynos-gsc 13c10000.gsc: exynos-iommu gpd_dev_ops inserted!
- <7>[ 1.451867] [c0] samsung-usb2phy 15530000.usb2phy: samsung_usb2phy_runtime_suspend
- <6>[ 1.451885] [c0] samsung_usb2phy_runtime_suspend: usage=0, child=0
- <6>[ 1.451895] [c0] s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 1.452023] [c5] [INFO]gsc_probe:1676: mdev->mdev[0] = 0xe5fa5800, mdev->mdev[1] = 0xe5fa5c00
- <6>[ 1.452438] [c5] exynos-gsc 13c10000.gsc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.452459] [c5] exynos-gsc 13c10000.gsc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- <6>[ 1.452475] [c5] exynos-gsc 13c10000.gsc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- <6>[ 1.452495] [c5] exynos-gsc 13c10000.gsc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- <6>[ 1.452514] [c5] exynos-gsc 13c10000.gsc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- <6>[ 1.452531] [c5] exynos-gsc 13c10000.gsc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <6>[ 1.452647] [c5] [INFO]gsc_probe:1713: gsc-1 registered successfully
- <6>[ 1.452769] [c5] PM DOMAIN: spd-gscl2, Device : 13c20000.gsc Registered
- <6>[ 1.452783] [c5] exynos-gsc 13c20000.gsc: exynos-iommu gpd_dev_ops inserted!
- <6>[ 1.453175] [c5] [INFO]gsc_probe:1676: mdev->mdev[0] = 0xe5fa5800, mdev->mdev[1] = 0xe5fa5c00
- <6>[ 1.453662] [c5] [INFO]gsc_register_capture_device:1172: gsc capture driver registered as /dev/video31
- <6>[ 1.453776] [c5] exynos-gsc 13c20000.gsc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.453797] [c5] exynos-gsc 13c20000.gsc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- <6>[ 1.453813] [c5] exynos-gsc 13c20000.gsc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- <6>[ 1.453833] [c5] exynos-gsc 13c20000.gsc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- <6>[ 1.453852] [c5] exynos-gsc 13c20000.gsc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- <6>[ 1.453867] [c5] exynos-gsc 13c20000.gsc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <6>[ 1.453979] [c5] [INFO]gsc_probe:1713: gsc-2 registered successfully
- <6>[ 1.454441] [c5] PM DOMAIN: pd-mfc, Device : 152e0000.mfc0 Registered
- <6>[ 1.454455] [c5] s5p-mfc 152e0000.mfc0: exynos-iommu gpd_dev_ops inserted!
- <7>[ 1.454475] [c5] s5p-mfc 152e0000.mfc0: s5p_mfc_probe()
- <7>[ 1.454488] [c5] s5p-mfc 152e0000.mfc0: of alias get id : mfc-0
- <6>[ 1.454859] [c5] s5p-mfc 152e0000.mfc0: decoder registered as /dev/video6
- <6>[ 1.455044] [c5] s5p-mfc 152e0000.mfc0: encoder registered as /dev/video7
- <6>[ 1.455227] [c5] s5p-mfc 152e0000.mfc0: secure decoder registered as /dev/video8
- <6>[ 1.455412] [c5] s5p-mfc 152e0000.mfc0: secure encoder registered as /dev/video9
- <6>[ 1.455531] [c5] s5p-mfc 152e0000.mfc0: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.455551] [c5] s5p-mfc 152e0000.mfc0: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- <6>[ 1.455567] [c5] s5p-mfc 152e0000.mfc0: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- <6>[ 1.455586] [c5] s5p-mfc 152e0000.mfc0: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- <6>[ 1.455606] [c5] s5p-mfc 152e0000.mfc0: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- <6>[ 1.455621] [c5] s5p-mfc 152e0000.mfc0: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <6>[ 1.455941] [c5] [d:0] s5p_mfc_probe:2808: QoS table[0] int : 100000 (mfc : 100000), mif : 167000
- <6>[ 1.455953] [c5] [d:0] s5p_mfc_probe:2814: >> Extra[0] int : 200000 (mfc : 200000), mif : 413000
- <6>[ 1.455964] [c5] [d:0] s5p_mfc_probe:2808: QoS table[1] int : 133000 (mfc : 160000), mif : 222000
- <6>[ 1.455974] [c5] [d:0] s5p_mfc_probe:2808: QoS table[2] int : 200000 (mfc : 200000), mif : 413000
- <6>[ 1.455985] [c5] [d:0] s5p_mfc_probe:2808: QoS table[3] int : 200000 (mfc : 200000), mif : 413000
- <6>[ 1.455995] [c5] [d:0] s5p_mfc_probe:2808: QoS table[4] int : 400000 (mfc : 400000), mif : 825000
- <7>[ 1.456004] [c5] s5p_mfc_probe--
- <6>[ 1.456428] [c5] PM DOMAIN: pd-hevc, Device : 14fe0000.hevc Registered
- <6>[ 1.456442] [c5] exynos-hevc 14fe0000.hevc: exynos-iommu gpd_dev_ops inserted!
- <6>[ 1.456457] [c5] + hevc_probe
- <7>[ 1.456467] [c5] exynos-hevc 14fe0000.hevc: hevc_probe()
- <6>[ 1.456784] [c5] exynos-hevc 14fe0000.hevc: decoder registered as /dev/video10
- <6>[ 1.456940] [c6] exynos-hevc 14fe0000.hevc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.456964] [c6] exynos-hevc 14fe0000.hevc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- <6>[ 1.456981] [c6] exynos-hevc 14fe0000.hevc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- <6>[ 1.457002] [c6] exynos-hevc 14fe0000.hevc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- <6>[ 1.457021] [c6] exynos-hevc 14fe0000.hevc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- <6>[ 1.457037] [c6] exynos-hevc 14fe0000.hevc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <7>[ 1.457264] [c6] hevc_probe--
- <6>[ 1.457921] [c6] PM DOMAIN: pd-cam1, Device : fimc_is_companion.18 Registered
- <4>[ 1.457939] [c6] [@][WRN] fimc_is_dev is not yet probed
- <6>[ 1.457972] [c6] platform exynos-fimc-is-companion: Driver exynos-fimc-is-companion requests probe deferral
- <6>[ 1.458385] [c6] PM DOMAIN: pd-isp, Device : 14180000.fimc_is Registered
- <6>[ 1.458400] [c6] exynos-fimc-is 14180000.fimc_is: exynos-iommu gpd_dev_ops inserted!
- <6>[ 1.458415] [c6] [@]fimc_is_probe:start
- <4>[ 1.458440] [c6] full_bypass_mcuctl: no property in the node.
- <4>[ 1.458450] [c6] full_bypass_3a0: no property in the node.
- <4>[ 1.458459] [c6] full_bypass_3a1: no property in the node.
- <4>[ 1.458468] [c6] full_bypass_isp: no property in the node.
- <4>[ 1.458478] [c6] full_bypass_scc: no property in the node.
- <4>[ 1.458487] [c6] full_bypass_odc: no property in the node.
- <4>[ 1.458497] [c6] full_bypass_scp: no property in the node.
- <4>[ 1.458506] [c6] full_bypass_fd: no property in the node.
- <4>[ 1.458515] [c6] version_3a0: no property in the node.
- <4>[ 1.458524] [c6] version_3a1: no property in the node.
- <4>[ 1.458532] [c6] version_isp: no property in the node.
- <4>[ 1.458541] [c6] version_drc: no property in the node.
- <4>[ 1.458550] [c6] version_scc: no property in the node.
- <4>[ 1.458558] [c6] version_odc: no property in the node.
- <4>[ 1.458567] [c6] version_dis: no property in the node.
- <4>[ 1.458575] [c6] version_dnr: no property in the node.
- <4>[ 1.458584] [c6] version_scp: no property in the node.
- <4>[ 1.458593] [c6] version_fd: no property in the node.
- <6>[ 1.458603] [c6] int value: 0
- <6>[ 1.458611] [c6] String value: 0-gate_3aa1
- <6>[ 1.458619] [c6] int value: 1
- <6>[ 1.458628] [c6] String value: 1-gate_isp
- <6>[ 1.458636] [c6] int value: 2
- <6>[ 1.458644] [c6] String value: 2-gate_drc
- <6>[ 1.458652] [c6] int value: 3
- <6>[ 1.458660] [c6] String value: 3-gate_scalerc
- <6>[ 1.458667] [c6] int value: 5
- <6>[ 1.458675] [c6] String value: 5-gate_dis
- <6>[ 1.458683] [c6] int value: 6
- <6>[ 1.458691] [c6] String value: 6-gate_3dnr
- <6>[ 1.458699] [c6] int value: 7
- <6>[ 1.458707] [c6] String value: 7-gate_scalerp
- <6>[ 1.458715] [c6] int value: 8
- <6>[ 1.458723] [c6] String value: 8-gate_fd
- <6>[ 1.458731] [c6] int value: 9
- <6>[ 1.458738] [c6] String value: 9-gate_3aa0
- <6>[ 1.458749] [c6] (0) int1 value: 9
- <6>[ 1.458758] [c6] (0) int2 value: 9
- <6>[ 1.458768] [c6] (1) [0x200 , 0x200, 0x0, 0x0
- <6>[ 1.458779] [c6] (2) [0x0 , 0x0, 0x0, 0x0
- <6>[ 1.458788] [c6] (2) int1 value: 1
- <6>[ 1.458796] [c6] (2) int1 value: 2
- <6>[ 1.458804] [c6] (2) int1 value: 3
- <6>[ 1.458813] [c6] (2) int1 value: 5
- <6>[ 1.458820] [c6] (2) int1 value: 6
- <6>[ 1.458828] [c6] (2) int1 value: 7
- <6>[ 1.458836] [c6] (2) int1 value: 8
- <6>[ 1.458844] [c6] (2) int2 value: 1
- <6>[ 1.458852] [c6] (2) int2 value: 2
- <6>[ 1.458860] [c6] (2) int2 value: 3
- <6>[ 1.458868] [c6] (2) int2 value: 5
- <6>[ 1.458876] [c6] (2) int2 value: 6
- <6>[ 1.458883] [c6] (2) int2 value: 7
- <6>[ 1.458891] [c6] (2) int2 value: 8
- <6>[ 1.458901] [c6] (3) [0x1ee , 0x1ee, 0x0, 0x0
- <6>[ 1.459194] [c6] exynos-fimc-is 14180000.fimc_is: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.459215] [c6] exynos-fimc-is 14180000.fimc_is: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x50000000.
- <6>[ 1.459234] [c6] exynos-fimc-is 14180000.fimc_is: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x80000000.
- <6>[ 1.459253] [c6] exynos-fimc-is 14180000.fimc_is: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0xa0000000.
- <6>[ 1.459269] [c6] exynos-fimc-is 14180000.fimc_is: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <6>[ 1.459486] [c6] fimc_is_dvfs_init
- <6>[ 1.459496] [c6] [@]fimc_is_resource_probe
- <6>[ 1.459510] [c6] [@]sensor_6d1_probe(0)
- <6>[ 1.459519] [c6] [@]sensor_imx240_probe(0)
- <6>[ 1.459784] [c6] [@][VID] exynos-fimc-is-3aa.0(110) is created
- <6>[ 1.459968] [c6] [@][VID] exynos-fimc-is-3aa.0c(111) is created
- <6>[ 1.460152] [c6] [@][VID] exynos-fimc-is-3aa.1(114) is created
- <6>[ 1.460332] [c6] [@][VID] exynos-fimc-is-3aa.1c(115) is created
- <6>[ 1.460342] [c6] [@][3AC1:V:1] fimc_is_3a1c_video_probe(0)
- <6>[ 1.460523] [c6] [@][VID] exynos-fimc-is-isp(130) is created
- <6>[ 1.460704] [c6] [@][VID] exynos-fimc-is-scalerc(134) is created
- <6>[ 1.460883] [c6] [@][VID] exynos-fimc-is-scalerp(137) is created
- <6>[ 1.461068] [c6] [@][VID] exynos-fimc-is-vdisc(140) is created
- <6>[ 1.461247] [c6] [@][VID] exynos-fimc-is-vdiso(141) is created
- <6>[ 1.466767] [c6] [@][COR] Device virtual for internal: e8401000
- <6>[ 1.467383] [c6] fimc_is_dvfs_init
- <6>[ 1.467393] [c6] [@]fimc_is_probe:end
- <6>[ 1.467824] [c6] fimc_is_fan53555_probe start
- <7>[ 1.467930] [c6] of_get_named_gpio_flags exited with status 47
- <3>[ 1.468278] [c6] [fimc_is_fan53555_probe::2099]fan53555 [Read :: a8 ,a8]
- <3>[ 1.468278]
- <6>[ 1.468295] [c6] fimc_is_fan53555_probe end
- <6>[ 1.468623] [c6] sclk = gpc3-0, ssn = gpc3-1, miso = gpc3-2, mois = gpc3-3 spi_channel:(0)
- <6>[ 1.468889] [c6] fimc_is_i2c0 10-003d: fimc_is_i2c0 driver probed!
- <6>[ 1.469418] [c6] PM DOMAIN: pd-cam0, Device : 12100000.fimc_is_sensor Registered
- <6>[ 1.469436] [c6] exynos-fimc-is-sensor 12100000.fimc_is_sensor: exynos-iommu gpd_dev_ops inserted!
- <7>[ 1.469480] [c6] of_get_named_gpio_flags exited with status 154
- <6>[ 1.469703] [c6] exynos-fimc-is-sensor 12100000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.469725] [c6] exynos-fimc-is-sensor 12100000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x50000000.
- <6>[ 1.469746] [c6] exynos-fimc-is-sensor 12100000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x80000000.
- <6>[ 1.469766] [c6] exynos-fimc-is-sensor 12100000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0xa0000000.
- <6>[ 1.469782] [c6] exynos-fimc-is-sensor 12100000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <6>[ 1.469933] [c6] [@][0][FRT:D] fimc_is_csi_probe(0)
- <6>[ 1.469944] [c6] [@][BAK:D:0] fimc_is_flite_probe(0)
- <6>[ 1.470157] [c6] [@][VID] exynos-fimc-is-sensor0(100) is created
- <6>[ 1.470167] [c6] [@][0][SEN:D] fimc_is_sensor_probe(0)
- <6>[ 1.470406] [c6] PM DOMAIN: pd-cam0, Device : 12110000.fimc_is_sensor Registered
- <6>[ 1.470421] [c6] exynos-fimc-is-sensor 12110000.fimc_is_sensor: exynos-iommu gpd_dev_ops inserted!
- <4>[ 1.470448] [c6] flash_first_gpio: no property in the node.
- <4>[ 1.470457] [c6] flash_second_gpio: no property in the node.
- <7>[ 1.470476] [c6] of_get_named_gpio_flags exited with status 153
- <7>[ 1.470500] [c6] of_get_named_gpio_flags exited with status 150
- <6>[ 1.470546] [c6] [0][0][5][ch1] gpio function cfg is seted
- <6>[ 1.470555] [0][1][1][off1] gpio function cfg is seted[1][0][5][ch1] gpio function cfg is seted
- <6>[ 1.470571] [1][1][1][off1] gpio function cfg is seted<6>[ 1.470631] exynos-fimc-is-sensor 12110000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.470652] [c6] exynos-fimc-is-sensor 12110000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x50000000.
- <6>[ 1.470671] [c6] exynos-fimc-is-sensor 12110000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x80000000.
- <6>[ 1.470691] [c6] exynos-fimc-is-sensor 12110000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0xa0000000.
- <6>[ 1.470707] [c6] exynos-fimc-is-sensor 12110000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <6>[ 1.470815] [c6] [@][1][FRT:D] fimc_is_csi_probe(0)
- <6>[ 1.470825] [c6] [@][BAK:D:1] fimc_is_flite_probe(0)
- <6>[ 1.471015] [c6] [@][VID] exynos-fimc-is-sensor1(101) is created
- <6>[ 1.471025] [c6] [@][1][SEN:D] fimc_is_sensor_probe(0)
- <6>[ 1.471592] [c6] [@]sensor_6d1_probe(0)
- <6>[ 1.471921] [c6] PM DOMAIN: spd-mscl0, Device : 15000000.scaler Registered
- <6>[ 1.471937] [c6] exynos5-scaler 15000000.scaler: exynos-iommu gpd_dev_ops inserted!
- <6>[ 1.472468] [c6] exynos5-scaler 15000000.scaler: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.472490] [c6] exynos5-scaler 15000000.scaler: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- <6>[ 1.472506] [c6] exynos5-scaler 15000000.scaler: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- <6>[ 1.472527] [c6] exynos5-scaler 15000000.scaler: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- <6>[ 1.472546] [c6] exynos5-scaler 15000000.scaler: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- <6>[ 1.472562] [c6] exynos5-scaler 15000000.scaler: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <6>[ 1.472948] [c6] exynos5-scaler 15000000.scaler: Driver probed successfully(version: 80000008)
- <6>[ 1.473062] [c6] PM DOMAIN: spd-mscl1, Device : 15010000.scaler Registered
- <6>[ 1.473077] [c6] exynos5-scaler 15010000.scaler: exynos-iommu gpd_dev_ops inserted!
- <6>[ 1.473409] [c6] exynos5-scaler 15010000.scaler: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.473430] [c6] exynos5-scaler 15010000.scaler: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- <6>[ 1.473446] [c6] exynos5-scaler 15010000.scaler: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- <6>[ 1.473465] [c6] exynos5-scaler 15010000.scaler: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- <6>[ 1.473485] [c6] exynos5-scaler 15010000.scaler: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- <6>[ 1.473500] [c6] exynos5-scaler 15010000.scaler: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <6>[ 1.473872] [c6] exynos5-scaler 15010000.scaler: Driver probed successfully(version: 80000008)
- <6>[ 1.474070] [c6] Exynos Graphics 2D driver, (c) 2011 Samsung Electronics
- <6>[ 1.474265] [c6] PM DOMAIN: pd-g2d, Device : 12400000.fimg2d Registered
- <6>[ 1.474279] [c6] s5p-fimg2d 12400000.fimg2d: exynos-iommu gpd_dev_ops inserted!
- <6>[ 1.474296] [c6] s5p-fimg2d 12400000.fimg2d: ++fimg2d_probe
- <6>[ 1.474313] [c6] [parse_g2d_qos_platdata] cpu_min:1500000, kfc_min:1500000, mif_min:825000, int_min:400000
- <6>[ 1.474327] [c6] [parse_g2d_qos_platdata] cpu_min:0, kfc_min:800000, mif_min:825000, int_min:400000
- <6>[ 1.474339] [c6] [parse_g2d_qos_platdata] cpu_min:0, kfc_min:800000, mif_min:533000, int_min:317000
- <6>[ 1.474352] [c6] [parse_g2d_qos_platdata] cpu_min:0, kfc_min:800000, mif_min:413000, int_min:267000
- <6>[ 1.474365] [c6] [parse_g2d_qos_platdata] cpu_min:0, kfc_min:500000, mif_min:413000, int_min:267000
- <6>[ 1.474740] [c6] [exynos5430_fimg2d_clk_setup] Done fimg2d clock setup
- <6>[ 1.474762] [c6] [fimg2d_clk_setup] gate clk: fin_pll
- <6>[ 1.474772] [c6] [fimg2d_probe] enable runtime pm
- <6>[ 1.474804] [c6] s5p-fimg2d 12400000.fimg2d: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.474824] [c6] s5p-fimg2d 12400000.fimg2d: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- <6>[ 1.474840] [c6] s5p-fimg2d 12400000.fimg2d: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- <6>[ 1.474859] [c6] s5p-fimg2d 12400000.fimg2d: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- <6>[ 1.474879] [c6] s5p-fimg2d 12400000.fimg2d: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- <6>[ 1.474895] [c6] s5p-fimg2d 12400000.fimg2d: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <6>[ 1.475184] [c6] s5p-fimg2d 12400000.fimg2d: fimg2d registered successfully
- <6>[ 1.475574] [c6] PM DOMAIN: spd-jpeg, Device : 15020000.jpeg0 Registered
- <6>[ 1.475589] [c6] exynos5-jpeg 15020000.jpeg0: exynos-iommu gpd_dev_ops inserted!
- <6>[ 1.476108] [c6] exynos5-jpeg 15020000.jpeg0: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 1.476129] [c6] exynos5-jpeg 15020000.jpeg0: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- <6>[ 1.476145] [c6] exynos5-jpeg 15020000.jpeg0: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- <6>[ 1.476165] [c6] exynos5-jpeg 15020000.jpeg0: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- <6>[ 1.476184] [c6] exynos5-jpeg 15020000.jpeg0: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- <6>[ 1.476200] [c6] exynos5-jpeg 15020000.jpeg0: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <3>[ 1.476842] [c6] sec-thermistor sec_thermistor.27: sec_therm_probe: fail to get iio channel
- <6>[ 1.476860] [c6] platform sec_thermistor.27: Driver sec-thermistor requests probe deferral
- <6>[ 1.481073] [c6] TRIMINFO[0] = 0x8a8348
- <6>[ 1.481084] [c6] TMU_CONTROL[0] = 0x10009803
- <6>[ 1.481094] [c6] CURRENT_TEMP[0] = 0x64
- <6>[ 1.481103] [c6] THRESHOLD_TEMP_RISE3_0[0] = 0x8c87837e
- <6>[ 1.481114] [c6] THRESHOLD_TEMP_RISE7_4[0] = 0xa09b9b91
- <6>[ 1.481123] [c6] THRESHOLD_TEMP_FALL3_0[0] = 0x8a85817c
- <6>[ 1.481133] [c6] THRESHOLD_TEMP_FALL7_4[0] = 0x9e99998f
- <6>[ 1.481143] [c6] INTEN[0] = 0xbf00bf
- <6>[ 1.481152] [c6] INTCLEAR[0] = 0x0
- <7>[ 1.486841] [c4] epen:pen_insert_work : 1
- <6>[ 1.487038] [c6] TRIMINFO[1] = 0x8b773d
- <6>[ 1.487049] [c6] TMU_CONTROL[1] = 0x10009803
- <6>[ 1.487059] [c6] CURRENT_TEMP[1] = 0x5b
- <6>[ 1.487068] [c6] THRESHOLD_TEMP_RISE3_0[1] = 0x807b7772
- <6>[ 1.487078] [c6] THRESHOLD_TEMP_RISE7_4[1] = 0x948f8f85
- <6>[ 1.487087] [c6] THRESHOLD_TEMP_FALL3_0[1] = 0x7e797570
- <6>[ 1.487097] [c6] THRESHOLD_TEMP_FALL7_4[1] = 0x928d8d83
- <6>[ 1.487106] [c6] INTEN[1] = 0xbf00bf
- <6>[ 1.487116] [c6] INTCLEAR[1] = 0x0
- <6>[ 1.493014] [c6] TRIMINFO[2] = 0x8c9759
- <6>[ 1.493024] [c6] TMU_CONTROL[2] = 0x17609803
- <6>[ 1.493033] [c6] CURRENT_TEMP[2] = 0x0
- <6>[ 1.493042] [c6] THRESHOLD_TEMP_RISE3_0[2] = 0xa19c9791
- <6>[ 1.493052] [c6] THRESHOLD_TEMP_RISE7_4[2] = 0xb6b0b0a6
- <6>[ 1.493062] [c6] THRESHOLD_TEMP_FALL3_0[2] = 0x9f9a948f
- <6>[ 1.493071] [c6] THRESHOLD_TEMP_FALL7_4[2] = 0xb3aeaea4
- <6>[ 1.493081] [c6] INTEN[2] = 0xbf00bf
- <6>[ 1.493090] [c6] INTCLEAR[2] = 0x0
- <6>[ 1.498985] [c6] TRIMINFO[3] = 0x8d793a
- <6>[ 1.498995] [c6] TMU_CONTROL[3] = 0x10009803
- <6>[ 1.499005] [c6] CURRENT_TEMP[3] = 0x57
- <6>[ 1.499014] [c6] THRESHOLD_TEMP_RISE3_0[3] = 0x837e7973
- <6>[ 1.499024] [c6] THRESHOLD_TEMP_RISE7_4[3] = 0x98939388
- <6>[ 1.499034] [c6] THRESHOLD_TEMP_FALL3_0[3] = 0x817c7671
- <6>[ 1.499043] [c6] THRESHOLD_TEMP_FALL7_4[3] = 0x96919186
- <6>[ 1.499053] [c6] INTEN[3] = 0xbf00bf
- <6>[ 1.499062] [c6] INTCLEAR[3] = 0x0
- <6>[ 1.504981] [c6] TRIMINFO[4] = 0x8e6d2f
- <6>[ 1.504991] [c6] TMU_CONTROL[4] = 0x10009803
- <6>[ 1.505000] [c6] CURRENT_TEMP[4] = 0x4c
- <6>[ 1.505010] [c6] THRESHOLD_TEMP_RISE3_0[4] = 0x77726d67
- <6>[ 1.505020] [c6] THRESHOLD_TEMP_RISE7_4[4] = 0x8c86867c
- <6>[ 1.505029] [c6] THRESHOLD_TEMP_FALL3_0[4] = 0x75706a65
- <6>[ 1.505039] [c6] THRESHOLD_TEMP_FALL7_4[4] = 0x8984847a
- <6>[ 1.505049] [c6] INTEN[4] = 0xbf00bf
- <6>[ 1.505058] [c6] INTCLEAR[4] = 0x0
- <6>[ 1.505831] [c6] s3c2410-wdt 10020000.watchdog: watchdog inactive, reset disabled, irq disabled
- <6>[ 1.506606] [c6] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- <6>[ 1.507065] [c6] Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.507348] [c6] [BT] bcm4358_bluetooth_probe.
- <7>[ 1.507369] [c6] of_get_named_gpio_flags exited with status 194
- <7>[ 1.507388] [c6] of_get_named_gpio_flags exited with status 127
- <7>[ 1.507405] [c6] of_get_named_gpio_flags exited with status 18
- <6>[ 1.507715] [c6] [BT] bcm4358_bluetooth_probe End
- <6>[ 1.507867] [c6] CPUFREQ of CA7 L0 : 1350000 uV
- <6>[ 1.507877] [c6] CPUFREQ of CA7 L0 : ABB 255
- <6>[ 1.507886] [c6] CPUFREQ of CA7 L1 : 1350000 uV
- <6>[ 1.507894] [c6] CPUFREQ of CA7 L1 : ABB 255
- <6>[ 1.507902] [c6] CPUFREQ of CA7 L2 : 1350000 uV
- <6>[ 1.507910] [c6] CPUFREQ of CA7 L2 : ABB 255
- <6>[ 1.507919] [c6] CPUFREQ of CA7 L3 : 1350000 uV
- <6>[ 1.507928] [c6] CPUFREQ of CA7 L3 : ABB 255
- <6>[ 1.507936] [c6] CPUFREQ of CA7 L4 : 1350000 uV
- <6>[ 1.507945] [c6] CPUFREQ of CA7 L4 : ABB 255
- <6>[ 1.507953] [c6] CPUFREQ of CA7 L5 : 1325000 uV
- <6>[ 1.507961] [c6] CPUFREQ of CA7 L5 : ABB 255
- <6>[ 1.507970] [c6] CPUFREQ of CA7 L6 : 1250000 uV
- <6>[ 1.507978] [c6] CPUFREQ of CA7 L6 : ABB 255
- <6>[ 1.507987] [c6] CPUFREQ of CA7 L7 : 1187500 uV
- <6>[ 1.507995] [c6] CPUFREQ of CA7 L7 : ABB 255
- <6>[ 1.508003] [c6] CPUFREQ of CA7 L8 : 1137500 uV
- <6>[ 1.508012] [c6] CPUFREQ of CA7 L8 : ABB 255
- <6>[ 1.508020] [c6] CPUFREQ of CA7 L9 : 1100000 uV
- <6>[ 1.508028] [c6] CPUFREQ of CA7 L9 : ABB 255
- <6>[ 1.508036] [c6] CPUFREQ of CA7 L10 : 1062500 uV
- <6>[ 1.508044] [c6] CPUFREQ of CA7 L10 : ABB 255
- <6>[ 1.508053] [c6] CPUFREQ of CA7 L11 : 1000000 uV
- <6>[ 1.508061] [c6] CPUFREQ of CA7 L11 : ABB 255
- <6>[ 1.508069] [c6] CPUFREQ of CA7 L12 : 975000 uV
- <6>[ 1.508078] [c6] CPUFREQ of CA7 L12 : ABB 255
- <6>[ 1.508086] [c6] CPUFREQ of CA7 L13 : 937500 uV
- <6>[ 1.508095] [c6] CPUFREQ of CA7 L13 : ABB 255
- <6>[ 1.508103] [c6] CPUFREQ of CA7 L14 : 912500 uV
- <6>[ 1.508111] [c6] CPUFREQ of CA7 L14 : ABB 255
- <6>[ 1.508119] [c6] CPUFREQ of CA7 L15 : 887500 uV
- <6>[ 1.508127] [c6] CPUFREQ of CA7 L15 : ABB 255
- <6>[ 1.508136] [c6] CPUFREQ of CA7 L16 : 850000 uV
- <6>[ 1.508144] [c6] CPUFREQ of CA7 L16 : ABB 255
- <6>[ 1.508153] [c6] CPUFREQ of CA7 L17 : 812500 uV
- <6>[ 1.508161] [c6] CPUFREQ of CA7 L17 : ABB 255
- <6>[ 1.508169] [c6] CPUFREQ of CA7 L18 : 787500 uV
- <6>[ 1.508177] [c6] CPUFREQ of CA7 L18 : ABB 255
- <6>[ 1.508186] [c6] CPUFREQ of CA7 max_freq : L7 1300000 khz
- <6>[ 1.508194] [c6] CPUFREQ of CA7 min_freq : L16 400000 khz
- <6>[ 1.508265] [c6] CPUFREQ of CA15 L0 : 1350000 uV
- <6>[ 1.508274] [c6] CPUFREQ of CA15 L0 : ABB 255
- <6>[ 1.508282] [c6] CPUFREQ of CA15 L1 : 1350000 uV
- <6>[ 1.508291] [c6] CPUFREQ of CA15 L1 : ABB 255
- <6>[ 1.508299] [c6] CPUFREQ of CA15 L2 : 1350000 uV
- <6>[ 1.508307] [c6] CPUFREQ of CA15 L2 : ABB 255
- <6>[ 1.508315] [c6] CPUFREQ of CA15 L3 : 1350000 uV
- <6>[ 1.508324] [c6] CPUFREQ of CA15 L3 : ABB 255
- <6>[ 1.508332] [c6] CPUFREQ of CA15 L4 : 1350000 uV
- <6>[ 1.508340] [c6] CPUFREQ of CA15 L4 : ABB 255
- <6>[ 1.508348] [c6] CPUFREQ of CA15 L5 : 1325000 uV
- <6>[ 1.508356] [c6] CPUFREQ of CA15 L5 : ABB 255
- <6>[ 1.508364] [c6] CPUFREQ of CA15 L6 : 1275000 uV
- <6>[ 1.508372] [c6] CPUFREQ of CA15 L6 : ABB 8
- <6>[ 1.508381] [c6] CPUFREQ of CA15 L7 : 1237500 uV
- <6>[ 1.508389] [c6] CPUFREQ of CA15 L7 : ABB 8
- <6>[ 1.508397] [c6] CPUFREQ of CA15 L8 : 1200000 uV
- <6>[ 1.508405] [c6] CPUFREQ of CA15 L8 : ABB 8
- <6>[ 1.508413] [c6] CPUFREQ of CA15 L9 : 1150000 uV
- <6>[ 1.508421] [c6] CPUFREQ of CA15 L9 : ABB 8
- <6>[ 1.508429] [c6] CPUFREQ of CA15 L10 : 1112500 uV
- <6>[ 1.508437] [c6] CPUFREQ of CA15 L10 : ABB 8
- <6>[ 1.508446] [c6] CPUFREQ of CA15 L11 : 1087500 uV
- <6>[ 1.508454] [c6] CPUFREQ of CA15 L11 : ABB 8
- <6>[ 1.508462] [c6] CPUFREQ of CA15 L12 : 1062500 uV
- <6>[ 1.508470] [c6] CPUFREQ of CA15 L12 : ABB 8
- <6>[ 1.508479] [c6] CPUFREQ of CA15 L13 : 1037500 uV
- <6>[ 1.508487] [c6] CPUFREQ of CA15 L13 : ABB 8
- <6>[ 1.508495] [c6] CPUFREQ of CA15 L14 : 1012500 uV
- <6>[ 1.508503] [c6] CPUFREQ of CA15 L14 : ABB 8
- <6>[ 1.508512] [c6] CPUFREQ of CA15 L15 : 987500 uV
- <6>[ 1.508520] [c6] CPUFREQ of CA15 L15 : ABB 8
- <6>[ 1.508528] [c6] CPUFREQ of CA15 L16 : 962500 uV
- <6>[ 1.508536] [c6] CPUFREQ of CA15 L16 : ABB 8
- <6>[ 1.508544] [c6] CPUFREQ of CA15 L17 : 937500 uV
- <6>[ 1.508553] [c6] CPUFREQ of CA15 L17 : ABB 8
- <6>[ 1.508561] [c6] CPUFREQ of CA15 L18 : 912500 uV
- <6>[ 1.508569] [c6] CPUFREQ of CA15 L18 : ABB 8
- <6>[ 1.508577] [c6] CPUFREQ of CA15 L19 : 900000 uV
- <6>[ 1.508585] [c6] CPUFREQ of CA15 L19 : ABB 8
- <6>[ 1.508594] [c6] CPUFREQ of CA15 L20 : 900000 uV
- <6>[ 1.508602] [c6] CPUFREQ of CA15 L20 : ABB 8
- <6>[ 1.508610] [c6] CPUFREQ of CA15 L21 : 900000 uV
- <6>[ 1.508618] [c6] CPUFREQ of CA15 L21 : ABB 8
- <6>[ 1.508626] [c6] CPUFREQ of CA15 L22 : 900000 uV
- <6>[ 1.508634] [c6] CPUFREQ of CA15 L22 : ABB 8
- <6>[ 1.508642] [c6] CPUFREQ of CA15 L23 : 900000 uV
- <6>[ 1.508651] [c6] CPUFREQ of CA15 L23 : ABB 8
- <6>[ 1.508662] [c6] CPUFREQ of CA15 max_freq : L6 1900000 khz
- <6>[ 1.508671] [c6] CPUFREQ of CA15 min_freq : L18 700000 khz
- <6>[ 1.508835] [c6] exynos5_cpufreq_CA15_init SMPL ENABLE 12
- <6>[ 1.508843] exynos5_cpufreq_CA15_init -- SMPL ENABLE 13 <6>[ 1.511426] Exynos: Kernel Thermal management registered
- <6>[ 1.511850] [c6] cpuidle: using governor ladder
- <6>[ 1.512455] [c6] cpuidle: using governor menu
- <6>[ 1.512555] [c6] Synopsys Designware Multimedia Card Interface Driver
- <7>[ 1.513099] [c6] of_get_named_gpio_flags exited with status 207
- <6>[ 1.513150] [c6] dwmmc_exynos 15540000.dwmmc0: Clock pin control Pin:gpr0-0 Addr:15690000.pinctrl Val:3 Num:6
- <6>[ 1.513292] dwmmc_exynos 15540000.dwmmc0: Using internal DMA controller.
- <6>[ 1.513305] [c6] dwmmc_exynos 15540000.dwmmc0: FIFOTH: 0x 300f0070
- <6>[ 1.513315] dwmmc_exynos 15540000.dwmmc0: Version ID is 270a
- <6>[ 1.513489] [c6] dwmmc_exynos 15540000.dwmmc0: DW MMC controller at irq 257, 64 bit host data width, 128 deep fifo
- <6>[ 1.513883] [c6] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
- <6>[ 1.547176] [c6] dw_mci_transferred_cnt_init: trans_count: successed.....
- <6>[ 1.547201] [c6] dwmmc_exynos 15540000.dwmmc0: 1 slots initialized
- <6>[ 1.547217] [c6] mmc_host mmc0: card inserted
- <7>[ 1.547590] [c6] of_get_named_gpio_flags exited with status 20
- <7>[ 1.547609] [c6] of_get_named_gpio_flags exited with status 135
- <6>[ 1.547626] [c6] dwmmc_exynos 15560000.dwmmc2: Clock pin control Pin:gpr4-0 Addr:15690000.pinctrl Val:2 Num:6
- <6>[ 1.547787] dwmmc_exynos 15560000.dwmmc2: Using internal DMA controller.
- <6>[ 1.547800] [c6] dwmmc_exynos 15560000.dwmmc2: FIFOTH: 0x 300f0030
- <6>[ 1.547809] dwmmc_exynos 15560000.dwmmc2: Version ID is 270a
- <6>[ 1.547977] [c6] dwmmc_exynos 15560000.dwmmc2: DW MMC controller at irq 259, 64 bit host data width, 64 deep fifo
- <6>[ 1.548041] [c6] mmc1: vmmc regulator found
- <6>[ 1.549673] [c6] mmc1: vqmmc regulator found
- <6>[ 1.550801] [c6] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
- <6>[ 1.586890] [c6] dw_mci_transferred_cnt_init: trans_count: successed.....
- <4>[ 1.587041] [c6] dwmmc_exynos 15560000.dwmmc2: success to request irq for card detect.
- <6>[ 1.587051] [c6] wake enabled for irq 723
- <6>[ 1.587103] [c6] mmc_host mmc1: card inserted
- <6>[ 1.587383] [c6] dwmmc_exynos 15560000.dwmmc2: 1 slots initialized
- <6>[ 1.587406] [c6] dwmmc_exynos 15560000.dwmmc2: vmmc_en is low.
- <6>[ 1.588046] [c6] leds-max77843-rgb: max77843_rgb_init
- <6>[ 1.588175] [c6] leds-max77843-rgb: max77843_rgb_probe
- <6>[ 1.588183] [c6] leds-max77843-rgb: max77843_rgb_parse_dt
- <6>[ 1.588219] [c6] leds-max77843-rgb: max77843_rgb_parse_dt, led_w
- <6>[ 1.588226] [c6] leds-max77843-rgb: max77843_rgb_parse_dt, led_r
- <6>[ 1.588234] [c6] leds-max77843-rgb: max77843_rgb_parse_dt, led_g
- <6>[ 1.588241] [c6] leds-max77843-rgb: max77843_rgb_parse_dt, led_b
- <6>[ 1.588248] [c6] leds-max77843-rgb: max77843_rgb_probe 1
- <6>[ 1.588499] [c6] leds-max77843-rgb: max77843_rgb_get
- <3>[ 1.588511] [c6] leds led_w: max77843_rgb_number() returns -19.
- <6>[ 1.588807] [c6] leds-max77843-rgb: max77843_rgb_get
- <3>[ 1.588819] [c6] leds led_r: max77843_rgb_number() returns -19.
- <6>[ 1.589112] [c6] leds-max77843-rgb: max77843_rgb_get
- <3>[ 1.589123] [c6] leds led_g: max77843_rgb_number() returns -19.
- <6>[ 1.589464] [c6] leds-max77843-rgb: max77843_rgb_get
- <3>[ 1.589476] [c6] leds led_b: max77843_rgb_number() returns -19.
- <6>[ 1.589817] [c6] leds-max77843-rgb: max77843_rgb_probe done
- <7>[ 1.590302] [c6] of_get_named_gpio_flags exited with status 151
- <6>[ 1.590312] [c6] ktd2692_probe : KTD2692_LED Probe
- <6>[ 1.590760] [c6] platform arizona-extcon: Driver arizona-extcon requests probe deferral
- <6>[ 1.591234] [c6] hidraw: raw HID events driver (C) Jiri Kosina
- <6>[ 1.600626] [c7] mmc0: BKOPS_EN bit is not set
- <4>[ 1.602414] [c7] mmc0: STROBE ENHANCED enable
- <6>[ 1.605062] [c5] Successfully registered hid_synaptics_driver
- <6>[ 1.605284] [c5] usbcore: registered new interface driver usbhid
- <6>[ 1.605293] [c5] usbhid: USB HID core driver
- <6>[ 1.606366] [c5] ashmem: initialized
- <6>[ 1.606633] [c5] logger: created 2048K log 'log_main'
- <6>[ 1.606642] [c5] sec_getlog_supply_loggerinfo: log_main, 0xe5200000
- <6>[ 1.607125] [c5] logger: created 256K log 'log_events'
- <6>[ 1.607134] [c5] sec_getlog_supply_loggerinfo: log_events, 0xe5040000
- <6>[ 1.607241] [c0] mmc_host mmc1: card removed
- <6>[ 1.607548] [c5] logger: created 2048K log 'log_radio'
- <6>[ 1.607558] [c5] sec_getlog_supply_loggerinfo: log_radio, 0xe4c00000
- <6>[ 1.607966] [c5] logger: created 256K log 'log_system'
- <6>[ 1.607976] [c5] sec_getlog_supply_loggerinfo: log_system, 0xe5080000
- <6>[ 1.608402] [c5] logger: created 256K log 'log_sf'
- <6>[ 1.608411] [c5] sec_getlog_supply_loggerinfo: log_sf, 0xe50c0000
- <7>[ 1.610485] [c5] of_get_named_gpio_flags exited with status 216
- <7>[ 1.610786] [c5] of_get_named_gpio_flags exited with status 8
- <6>[ 1.611040] [c5] gps_geofence_wake_init misc register, name gps_geofence_wake, irq 725, host req pin num 8
- <6>[ 1.611382] [c5] wake enabled for irq 725
- <6>[ 1.611403] [c5] max77843_fuelgauge_init:
- <6>[ 1.611519] [c5] max77843_fuelgauge_probe: MAX77843 Fuelgauge Driver Loading
- <6>[ 1.611627] [c5] [-5000]
- <6>[ 1.611637] [0][0]
- <6>[ 1.611648]
- <6>[ 1.611655] [c5] [-1250]
- <6>[ 1.611666] [0][3320]
- <6>[ 1.611677]
- <6>[ 1.611689] [c5] [-750]
- <6>[ 1.611699] [97][3451]
- <6>[ 1.611710]
- <6>[ 1.611723] [c5] [-100]
- <6>[ 1.611729] [96][3461]
- <6>[ 1.611739]
- <6>[ 1.611747] [c7] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
- <6>[ 1.611757] [c5] [0]
- <6>[ 1.611763] [0][3456]
- <6>[ 1.611773]
- <6>[ 1.611780] [c7] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
- <6>[ 1.611879] [c5] max77843_fuelgauge_parse_dt fg_irq: 0, capacity_max: 990
- <6>[ 1.611879] qrtable20: 0x900, qrtable30 : 0x780
- <6>[ 1.611879] cpacity_max_margin: 30, capacity_min: 0
- <6>[ 1.611879] calculation_type: 0x1c, fuel_alert_soc: 1,
- <6>[ 1.611879] repeated_fuelalert: 1
- <6>[ 1.611897] [c5] [max77843_fuelgauge_parse_dt][6600][3600]
- <7>[ 1.612176] [c5] fg_read_rawsoc: raw capacity (0.01%) (3882)
- <7>[ 1.612185] [c5] fg_read_rawsoc: raw capacity (3882), data(0x26d4)
- <6>[ 1.612542] [c7] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 50000000Hz, actual 50000000HZ div = 2)
- <6>[ 1.612573] [c7] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
- <6>[ 1.613768] [c7] mmc0: new high speed HS200-DDR MMC card at address 0001
- <3>[ 1.614095] [c5] power_supply max77843-fuelgauge: driver failed to report `status' property: -22
- <6>[ 1.614671] [c5] mmcblk0: mmc0:0001 R21AMA 29.1 GiB
- <6>[ 1.614939] [c6] mmcblk0boot0: mmc0:0001 R21AMA partition 1 4.00 MiB
- <6>[ 1.615101] [c6] mmcblk0boot1: mmc0:0001 R21AMA partition 2 4.00 MiB
- <6>[ 1.615259] [c6] mmcblk0rpmb: mmc0:0001 R21AMA partition 3 4.00 MiB
- <6>[ 1.615635] [c7] fg_read_temp: TEMPERATURE(36499), data(0x2480)
- <6>[ 1.615654] [c7] [max77843_fuelgauge_probe]IRQ_BASE(534) FG_IRQ(544)
- <3>[ 1.615699] [c7] power_supply max77843-fuelgauge: driver failed to report `status' property: -22
- <6>[ 1.619544] [c7] [max77843_alert_init] SALRT(0xff01), VALRT(0xff00), CONFIG(0x0314)
- <6>[ 1.620445] [c4] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
- <6>[ 1.620765] [c7] max77843_fuelgauge_probe: MAX77843 Fuelgauge Driver Loaded
- <6>[ 1.621046] [c5] max77843_charger_init :
- <6>[ 1.621193] [c5] max77843_charger_probe: Max77843 Charger Driver Loading
- <6>[ 1.621420] [c5] max77843_charger_initialize
- <6>[ 1.623083] [c5] max77843_charger_initialize: battery cv voltage 0x9f
- <7>[ 1.623333] [c5] MAX77843 addr : 0xb0 data : 0x00
- <7>[ 1.623581] [c5] MAX77843 addr : 0xb1 data : 0x9a
- <7>[ 1.623880] [c5] MAX77843 addr : 0xb2 data : 0x9d
- <7>[ 1.624173] [c5] MAX77843 addr : 0xb3 data : 0x00
- <7>[ 1.624412] [c5] MAX77843 addr : 0xb4 data : 0x38
- <7>[ 1.624652] [c5] MAX77843 addr : 0xb5 data : 0x00
- <7>[ 1.624893] [c5] MAX77843 addr : 0xb6 data : 0xff
- <7>[ 1.625075] [c5] MAX77843 addr : 0xb7 data : 0x04
- <7>[ 1.625256] [c5] MAX77843 addr : 0xb8 data : 0x30
- <7>[ 1.625436] [c5] MAX77843 addr : 0xb9 data : 0x89
- <7>[ 1.625614] [c5] MAX77843 addr : 0xba data : 0x36
- <7>[ 1.625793] [c5] MAX77843 addr : 0xbb data : 0x9f
- <7>[ 1.625973] [c5] MAX77843 addr : 0xbc data : 0x96
- <7>[ 1.626169] [c5] MAX77843 addr : 0xbd data : 0x0c
- <7>[ 1.626349] [c5] MAX77843 addr : 0xbe data : 0x30
- <6>[ 1.626423] [c4] mmcblk0boot1: unknown partition table
- <7>[ 1.626530] [c5] MAX77843 addr : 0xbf data : 0xff
- <7>[ 1.626709] [c5] MAX77843 addr : 0xc0 data : 0x0f
- <7>[ 1.626922] [c5] MAX77843 addr : 0xc1 data : 0x19
- <7>[ 1.627103] [c5] MAX77843 addr : 0xc2 data : 0x00
- <6>[ 1.627222] [c4] mmcblk0boot0: unknown partition table
- <7>[ 1.627289] [c5] MAX77843 addr : 0xc3 data : 0x67
- <6>[ 1.627477] [c5] max77843_charger_probe : device found : ver.0x2
- <6>[ 1.627941] [c5] max77843_get_charger_state : charger status (0x38)
- <6>[ 1.628141] [c5] max77843_check_battery : CHG_INT_OK(0x9d)
- <6>[ 1.628329] [c5] max77843_check_battery : CHG_DETAILS00(0x0)
- <6>[ 1.628533] [c5] max77843_get_charging_health: reg_data(0x3)
- <3>[ 1.628543] [c5] max77843_get_charging_health: Fail to get psy (battery)
- <6>[ 1.628664] [c4] dwmmc_exynos 15560000.dwmmc2: vmmc off, vqmmc on.
- <6>[ 1.628723] [c5] max77843_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- <6>[ 1.629076] [c5] max77843_get_charging_health: vbus_state : 0x0, chg_dtls : 0x8
- <7>[ 1.629609] [c5] max77843_chg_get_property : set-current(0mA), current now(500mA)
- <6>[ 1.629794] [c5] max77843_get_float_voltage: battery cv voltage 0x1f
- <6>[ 1.630224] [c5] max77843_get_charger_state : charger status (0x38)
- <6>[ 1.631275] [c5] max77843_check_battery : CHG_INT_OK(0x9d)
- <6>[ 1.632270] [c5] max77843_check_battery : CHG_DETAILS00(0x0)
- <6>[ 1.632976] [c6] max77843_charger_probe: Max77843 Charger Driver Loaded
- <6>[ 1.633153] [c5] max77843_get_charging_health: reg_data(0x3)
- <3>[ 1.633164] [c5] max77843_get_charging_health: Fail to get psy (battery)
- <6>[ 1.633373] [c6] [VIB] ++ max77843_haptic_probe
- <4>[ 1.633382] [c6] of_max77843_haptic_dt : start dt parsing
- <4>[ 1.633402] [c6] of_max77843_haptic_dt : max_timeout = 10000
- <4>[ 1.633409] [c6] of_max77843_haptic_dt : duty = 30500
- <4>[ 1.633417] [c6] of_max77843_haptic_dt : period = 33670
- <4>[ 1.633423] [c6] of_max77843_haptic_dt : pwm_id = 0
- <4>[ 1.633430] [c6] of_max77843_haptic_dt : regulator_name = VCC_3.0V_MOTOR_AP
- <6>[ 1.633448] [c5] max77843_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- <6>[ 1.633774] [c6] [VIB] DEV NAME max77843-haptic 0
- <6>[ 1.633987] [c5] max77843_get_charging_health: vbus_state : 0x0, chg_dtls : 0x8
- <7>[ 1.634797] [c5] max77843_chg_get_property : set-current(0mA), current now(500mA)
- <3>[ 1.634843] [c6] exynos-adc 14d10000.adc: operating without regulator vdd[-19]
- <6>[ 1.634984] [c5] max77843_get_float_voltage: battery cv voltage 0x1f
- <6>[ 1.635154] [c7] exynos-adc 14d10000.adc: Probed successfully driver.
- <6>[ 1.635455] [c7] peel_ir:peelir_init
- <6>[ 1.635578] [c7] peel_ir:peelir_probe
- <6>[ 1.635586] [c7] peel_ir:of_irled_parse_dt
- <6>[ 1.635593] [c7] of_irled_power_parse_dt
- <6>[ 1.635602] [c7] of_irled_power_parse_dt: power type(LDO)
- <7>[ 1.635619] [c7] of_get_named_gpio_flags exited with status 123
- <6>[ 1.635966] [c7] peel_ir:peelir_init end
- <6>[ 1.635976] [c7] mckernelapi : Mobicore API module initialized!
- <6>[ 1.635999] [c7] MobiCore mcd: MobiCore Driver, Build: Thu Sep 11 00:27:51 2014
- <6>[ 1.636006] [c7] MobiCore mcd: MobiCore mcDrvModuleApi version is 1.1
- <6>[ 1.636014] [c7] MobiCore mcd: MobiCore t-base-EXYNOS5433-Android-301-V008-2014-08-07_11-26-55_85
- <3>[ 1.636455] [c7] Loading t-base-tui module.
- <6>[ 1.636677] [c7] allocateTuiMemoryPool drivers/gud/TlcTui/platforms/exynos5433/tui-hal.c:55
- <6>[ 1.636685] [c7] vfsspi_init
- <6>[ 1.636964] [c7] vfsspi_probe
- <7>[ 1.636975] [c7] of_get_named_gpio_flags exited with status 66
- <6>[ 1.636982] [c7] vfsspi_parse_dt: sleepPin=66
- <7>[ 1.636991] [c7] of_get_named_gpio_flags exited with status 15
- <6>[ 1.636998] [c7] vfsspi_parse_dt: drdyPin=15
- <3>[ 1.637005] [c7] vfsspi_parse_dt: not set ocp_pin in dts
- <6>[ 1.637012] [c7] vfsspi_parse_dt: ocp_pin=0
- <7>[ 1.637022] [c7] of_get_named_gpio_flags exited with status 55
- <6>[ 1.637028] [c7] vfsspi_parse_dt: ocp_en=55
- <7>[ 1.637037] [c7] of_get_named_gpio_flags exited with status 56
- <6>[ 1.637043] [c7] vfsspi_parse_dt: ldo_pin=56
- <7>[ 1.637052] [c7] of_get_named_gpio_flags exited with status 57
- <6>[ 1.637059] [c7] vfsspi_parse_dt: ldo_pin2=57
- <6>[ 1.637067] [c7] vfsspi_parse_dt: ldocontrol=1
- <6>[ 1.637074] [c7] vfsspi_parse_dt: orient=0
- <6>[ 1.637083] [c7] vfsspi_platformInit
- <6>[ 1.637093] [c7] vfsspi_platformInit ocp off
- <6>[ 1.638107] [c7] vfsspi_platformInit ldo off
- <6>[ 1.638180] [c7] vfsspi_disable_irq
- <6>[ 1.638190] [c7] vfsspi_platformInit drdy value =0
- <6>[ 1.638190] vfsspi_platformInit sleep value =0
- <6>[ 1.638190] vfsspi_platformInit ldo en value =0
- <6>[ 1.638202] [c7] vfsspi_platformInit ldo en2 value =0
- <6>[ 1.638209] [c7] vfsspi_platformInit vfsspi_platofrminit, status=0
- <6>[ 1.642515] [c7] vfsspi_regulator_onoff: on ocp_en: enable
- <6>[ 1.648658] [c7] vfsspi_hardReset
- <3>[ 4.505972] [c6] validity_fingerprint spi2.0: I/O Error: rx-1 tx-1 res:rx-f tx-f len-64
- <6>[ 4.506071] [c5] ValiditySensor: spi_sync returned -5
- <6>[ 4.636901] [c6] max77843_chgin_init_work
- <6>[ 5.836918] [c6] muic_notifier_register: listener=1 register
- <3>[ 7.355977] [c7] validity_fingerprint spi2.0: I/O Error: rx-1 tx-1 res:rx-f tx-f len-6
- <6>[ 7.356078] [c6] vfsspi_probe ValiditySensor: spi_sync returned -5
- <6>[ 7.356089] [c6] vfsspi_probe sensor type is FAILED
- <6>[ 7.357123] [c6] vfsspi_regulator_onoff: off ocp_en: enable
- <6>[ 7.357816] [c6] vfsspi_probe success...
- <6>[ 7.358142] [c6] vfsspi_init init is successful
- <6>[ 7.359065] [c6] usbcore: registered new interface driver snd-usb-audio
- <3>[ 7.361292] [c6] max98504 9-0031: Failed to read log_class.
- <6>[ 7.399613] [c6] lpass_register_subip: i2s(e61edc10) registered
- <6>[ 7.401267] [c6] lpass_register_subip: i2s(e61ede10) registered
- <6>[ 7.401767] [c6] Exynos Audio Mixer driver, (c)2014 Samsung Electronics
- <6>[ 7.406121] [c6] wake enabled for irq 512
- <4>[ 7.975147] [c6] florida-codec florida-codec: ASoC: Failed to create platform debugfs directory
- <6>[ 7.996635] [c6] preallocate_dma_buffer_of: DmaAddr-iommu 40000000 dma_buf_pa 44F80000
- <6>[ 7.996910] [c6] preallocate_dma_buffer_of: DmaAddr-iommu 41000000 dma_buf_pa 44800000
- <6>[ 7.996922] [c6] pacific-audio sound.23: florida-aif1 <-> 11440000.i2s mapping ok
- <6>[ 7.997219] [c6] pacific-audio sound.23: florida-aif2 <-> pacific-ext voice call mapping ok
- <6>[ 7.997509] [c6] pacific-audio sound.23: florida-aif3 <-> pacific-ext bluetooth sco mapping ok
- <6>[ 7.997823] [c6] pacific-audio sound.23: florida-aif1 <-> samsung-i2s-sec mapping ok
- <6>[ 7.998076] [c6] compress asoc: florida-dsp-voicectrl <-> florida-cpu-voicectrl mapping ok
- <6>[ 7.998316] [c6] compress asoc: florida-dsp-trace <-> florida-cpu-trace mapping ok
- <6>[ 7.998649] [c6] pacific-audio sound.23: florida-aif1 <-> samsung-eax.0 mapping ok
- <6>[ 7.998964] [c6] pacific-audio sound.23: florida-aif1 <-> samsung-eax.1 mapping ok
- <7>[ 8.000327] [c6] of_get_named_gpio_flags exited with status 122
- <6>[ 8.000351] [c6] florida-codec florida-codec: pacific_update_impedance_table: shift = 0
- <4>[ 8.007731] [c6] dummy-codec dummy-codec.22: ASoC: Failed to create Capture debugfs file
- <4>[ 8.007746] [c6] dummy-codec dummy-codec.22: ASoC: Failed to create Playback debugfs file
- <4>[ 8.007758] [c6] dummy-codec dummy-codec.22: ASoC: Failed to create Capture debugfs file
- <4>[ 8.007769] [c6] dummy-codec dummy-codec.22: ASoC: Failed to create Playback debugfs file
- <4>[ 8.007780] [c6] dummy-codec dummy-codec.22: ASoC: Failed to create Capture debugfs file
- <4>[ 8.007791] [c6] dummy-codec dummy-codec.22: ASoC: Failed to create Playback debugfs file
- <6>[ 8.008296] [c6] pacific-hdmi hdmi.24: dummy-aif1 <-> 14d60000.i2s mapping ok
- <6>[ 8.010924] [c6] Exynos Seiren Audio driver, (c)2013 Samsung Electronics
- <6>[ 8.011315] [c6] lpass_register_subip: ca5(e61ed810) registered
- <6>[ 8.017481] [c6] GACT probability NOT on
- <6>[ 8.017495] [c6] Mirror/redirect action on
- <6>[ 8.017503] [c6] u32 classifier
- <6>[ 8.017509] [c6] Actions configured
- <6>[ 8.017517] [c6] Netfilter messages via NETLINK v0.30.
- <6>[ 8.017553] [c6] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- <6>[ 8.018452] [c6] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 8.018498] [c6] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 8.018505] [c6] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 8.019704] [c6] xt_time: kernel timezone is -0000
- <6>[ 8.019865] [c6] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 8.019983] [c6] arp_tables: (C) 2002 David S. Miller
- <6>[ 8.020016] [c6] TCP: cubic registered
- <6>[ 8.020023] [c6] Initializing XFRM netlink socket
- <6>[ 8.020990] [c6] NET: Registered protocol family 10
- <6>[ 8.021336] [c6] mip6: Mobile IPv6
- <6>[ 8.021358] [c6] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 8.021451] [c6] sit: IPv6 over IPv4 tunneling driver
- <6>[ 8.023678] [c6] NET: Registered protocol family 17
- <6>[ 8.023698] [c6] NET: Registered protocol family 15
- <6>[ 8.023708] [c6] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 8.023719] [c6] Bluetooth: HIDP socket layer initialized
- <6>[ 8.023736] [c6] NET: Registered protocol family 35
- <6>[ 8.024315] [c6] VFP support v0.3: implementor 41 architecture 3 part 40 variant 7 rev 0
- <5>[ 8.024344] [c6] Registering SWP/SWPB emulation handler
- <6>[ 8.024353] [c6] muic_notifier_register: listener=5 register
- <6>[ 8.024361] [c6] exynos_cpuidle_muic_notifier - action=0, attached_dev=0
- <6>[ 8.029131] [c6] zswap: loading zswap
- <6>[ 8.029278] [c6] zswap: using lzo compressor
- <7>[ 8.029854] [c6] of_get_named_gpio_flags exited with status 124
- <7>[ 8.029867] [c6] of_get_named_gpio_flags exited with status 125
- <4>[ 8.030020] [c6] LINK STATUS: 0
- <6>[ 8.030613] [c6] exynos-pcie 156b0000.pcie: exynos_pcie_establish_link: Link up: 11
- <6>[ 8.030958] [c6] PCI host bridge to bus 0000:00
- <6>[ 8.030969] [c6] pci_bus 0000:00: root bus resource [io 0x1000-0x10000]
- <6>[ 8.030981] [c6] pci_bus 0000:00: root bus resource [mem 0x0c011000-0x0ffffffe]
- <6>[ 8.030992] [c6] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- <7>[ 8.031068] [c6] pci 0000:00:00.0: [144d:a5e3] type 01 class 0x060400
- <7>[ 8.031325] [c6] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- <6>[ 8.031681] [c6] PCI: bus0: Fast back to back transfers disabled
- <7>[ 8.033257] [c6] pci 0000:01:00.0: [14e4:43e9] type 00 class 0x028000
- <7>[ 8.034285] [c6] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit]
- <7>[ 8.035090] [c6] pci 0000:01:00.0: reg 18: [mem 0x00000000-0x003fffff 64bit]
- <7>[ 8.038454] [c6] pci 0000:01:00.0: supports D1 D2
- <7>[ 8.038463] [c6] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- <6>[ 8.040013] [c6] PCI: bus1: Fast back to back transfers disabled
- <7>[ 8.040026] [c6] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- <7>[ 8.040047] [c6] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
- <6>[ 8.041383] [c6] pcieport 0000:00:00.0: BAR 8: assigned [mem 0x0c200000-0x0c7fffff]
- <6>[ 8.041395] [c6] pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff 64bit]
- <6>[ 8.041941] [c6] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c200000-0x0c207fff 64bit]
- <7>[ 8.042498] [c6] pci_bus 0000:00: resource 4 [io 0x1000-0x10000]
- <7>[ 8.042507] [c6] pci_bus 0000:00: resource 5 [mem 0x0c011000-0x0ffffffe]
- <7>[ 8.042516] [c6] pci_bus 0000:01: resource 1 [mem 0x0c200000-0x0c7fffff]
- <4>[ 8.042550] [c6] [dw_pcie_config_l1ss] EP L1ss value : f
- <6>[ 8.042582] [c6] sec_argos_register_notifier: sec_argos_l1ss_notifier(dev_num:2)
- <6>[ 8.042590] [c6] sec_argos_register_notifier: sec_argos_l1ss_notifier(dev_num:3)
- <6>[ 8.044054] [c6] PM DOMAIN: spd-decon, Device : 13800000.decon_fb Registered
- <6>[ 8.044070] [c6] s5p-decon-display 13800000.decon_fb: exynos-iommu gpd_dev_ops inserted!
- <7>[ 8.044549] [c6] of_get_named_gpio_flags exited with status 174
- <7>[ 8.044564] [c6] of_get_named_gpio_flags exited with status 45
- <6>[ 8.044586] [c6] /decon_fb/s6e3ha2_wqhd is founded
- <6>[ 8.058891] [c6] s5p-decon-display 13800000.decon_fb: MIC driver has been probed
- <6>[ 8.059287] [c6] get_supplies: VCC_1.8V_LCD_AP
- <6>[ 8.059294] [c6] get_supplies: VCC_3.0V_LCD_AP
- <6>[ 8.072417] [c6] s5p-decon-display 13800000.decon_fb: rx fifo : 1600031c, response : 1c, rx_size : 3
- <6>[ 8.072598] [c6] s5p-decon-display 13800000.decon_fb: rx fifo : 2900051c, response : 1c, rx_size : 5
- <6>[ 8.072823] [c6] s5p-decon-display 13800000.decon_fb: rx fifo : 3300041c, response : 1c, rx_size : 4
- <6>[ 8.073059] [c6] s5p-decon-display 13800000.decon_fb: rx fifo : 3f002c1c, response : 1c, rx_size : 44
- <6>[ 8.073273] [c6] s5p-decon-display 13800000.decon_fb: rx fifo : 900161c, response : 1c, rx_size : 22
- <6>[ 8.073549] [c6] s5p-decon-display 13800000.decon_fb: rx fifo : 3500081c, response : 1c, rx_size : 8
- <6>[ 8.073692] [c6] lcd panel: ID: 50, 20, 9
- <6>[ 8.074246] [c6] Dynamic Aid Finished !
- <6>[ 8.074586] [c6] Dynamic Aid Finished !
- <6>[ 8.074988] [c6] s5p-decon-display 13800000.decon_fb: rx fifo : 36001f1c, response : 1c, rx_size : 31
- <6>[ 8.075821] [c6] mdnie mdnie: STANDARD_UI
- <6>[ 8.075832] [c6] mdnie mdnie: registered successfully
- <6>[ 8.075953] [c6] lcd panel: caps: 1, temperature: 0, elvss: 14, 120f9c
- <6>[ 8.075987] [c6] lcd panel: vint: 21
- <6>[ 8.076090] [c6] lcd panel: acl: 0, auto_brightness: 0
- <6>[ 8.076126] [c6] lcd panel: temperature: 25, tset: 25
- <6>[ 8.076159] [c6] lcd panel: hbm: 0, auto_brightness: 0
- <6>[ 8.076193] [c6] lcd panel: brightness=134, bl=53, candela=183
- <7>[ 8.076232] [c6] of_get_named_gpio_flags exited with status 149
- <6>[ 8.076279] [c0] lcd panel: esd_fg_isr: esd_fg(0) is detected
- <6>[ 8.076370] [c6] s5p-decon-display 13800000.decon_fb: esd_fg_init: esd_fg(0)
- <7>[ 8.076386] [c6] of_get_named_gpio_flags exited with status 159
- <6>[ 8.076396] [c6] s5p-decon-display 13800000.decon_fb: esd_fg_init: oled_det_gpio = 1
- <6>[ 8.076443] [c6] lcd panel: drivers/video/exynos/panels/s6e3ha2_mipi_lcd.c lcd panel driver has been probed.
- <6>[ 8.076453] [c6] s5p-decon-display 13800000.decon_fb: mipi-dsi driver(CPU mode) has been probed.
- <6>[ 8.076465] [c6] s5p-decon-display 13800000.decon_fb: PSR mode is 2(0: VIDEO, 1: DP, 2: MIPI)
- <6>[ 8.077011] [c6] s5p-decon-display 13800000.decon_fb: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 8.077030] [c6] s5p-decon-display 13800000.decon_fb: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x50000000.
- <6>[ 8.077048] [c6] s5p-decon-display 13800000.decon_fb: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x80000000.
- <6>[ 8.077065] [c6] s5p-decon-display 13800000.decon_fb: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0xa0000000.
- <6>[ 8.077078] [c6] s5p-decon-display 13800000.decon_fb: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <7>[ 8.093354] [c6] of_get_named_gpio_flags exited with status 5
- <6>[ 8.093416] [c6] s5p-decon-display 13800000.decon_fb: pcd_detection_init: pcd_detected 0, pcd gpio 1
- <7>[ 8.093427] [c6] of_get_named_gpio_flags exited with status 43
- <4>[ 8.095905] [c6] s5p-decon-display 13800000.decon_fb: pm_stay_awake
- <6>[ 8.095915] s5p-decon-display 13800000.decon_fb: window 0: fb
- <6>[ 8.096294] [c6] Samsung HDMI output driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
- <6>[ 8.096625] [c6] PM DOMAIN: spd-hdmi, Device : 13970000.hdmi Registered
- <6>[ 8.096640] [c6] s5p-hdmi 13970000.hdmi: probe start
- <6>[ 8.096651] [c6] s5p-hdmi 13970000.hdmi: HDMI ip version 6
- <6>[ 8.096693] [c6] s5p-hdmi 13970000.hdmi: success request hdmi-int irq
- <7>[ 8.096897] [c6] of_get_named_gpio_flags exited with status 24
- <6>[ 8.096911] [c6] s5p-hdmi 13970000.hdmi: success request GPIO for hdmi-hpd
- <6>[ 8.097281] [c6] s5p-hdmi 13970000.hdmi: success register switch device
- <6>[ 8.097350] [c6] s5p-hdmi 13970000.hdmi: success request hdmi-ext irq
- <6>[ 8.097674] [c6] s5p-hdmi 13970000.hdmi: hdmi audio master 48fs support: no
- <6>[ 8.098190] [c6] s5p-hdmi 13970000.hdmi: probe sucessful
- <6>[ 8.098684] [c6] PM DOMAIN: spd-decon-tv, Device : 13880000.decon_tv Registered
- <6>[ 8.098699] [c6] decon-tv 13880000.decon_tv: exynos-iommu gpd_dev_ops inserted!
- <6>[ 8.098713] [c6] decon-tv 13880000.decon_tv: probe start
- <6>[ 8.098723] [c6] decon-tv 13880000.decon_tv: DECON-TV ip version 6
- <6>[ 8.099318] [c6] decon-tv 13880000.decon_tv: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- <6>[ 8.099338] [c6] decon-tv 13880000.decon_tv: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x50000000.
- <6>[ 8.099356] [c6] decon-tv 13880000.decon_tv: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x80000000.
- <6>[ 8.099375] [c6] decon-tv 13880000.decon_tv: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0xa0000000.
- <6>[ 8.099390] [c6] decon-tv 13880000.decon_tv: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- <6>[ 8.105197] [c6] decon-tv 13880000.decon_tv: decon_tv registered successfully
- <6>[ 8.105440] regulator regulator.35: func:max77843_reg_is_enabled
- <6>[ 8.105451] [c6] regulator regulator.35: func:max77843_get_rid
- <6>[ 8.105460] [c6] regulator regulator.35: func:max77843_get_enable_register
- <6>[ 8.105771] [c6] regulator regulator.34: func:max77843_reg_is_enabled
- <6>[ 8.105782] [c6] regulator regulator.34: func:max77843_get_rid
- <6>[ 8.105791] [c6] regulator regulator.34: func:max77843_get_enable_register
- <6>[ 8.106095] [c6] safeout1_range: disabling
- <6>[ 8.106107] [c6] regulator regulator.34: func:max77843_reg_disable
- <6>[ 8.106115] [c6] regulator regulator.34: func:max77843_get_rid
- <6>[ 8.106123] [c6] is_muic_usb_path_ap_usb: [0]
- <6>[ 8.106131] [c6] max77843_regulator_check_disable: cannot disable regulator(0)
- <3>[ 8.106138] [c6] safeout1_range: couldn't disable: -22
- <6>[ 8.106365] [c6] V_IRLED_3.3V: disabling
- <6>[ 8.106923] [c6] V_HRM_1.8V: disabling
- <3>[ 8.109674] [c4] PM DOMAIN: pd-cam1 can't add device exynos-fimc-is-companion
- <7>[ 8.109703] [c4] of_get_named_gpio_flags exited with status 47
- <7>[ 8.109720] [c4] of_get_named_gpio_flags exited with status 71
- <7>[ 8.109739] [c4] of_get_named_gpio_flags exited with status 154
- <7>[ 8.109757] [c4] of_get_named_gpio_flags exited with status 63
- <7>[ 8.109768] [c4] of_get_named_gpio_flags exited with status 62
- <3>[ 8.109779] [c4] fimc_is_companion_parse_dt:435: use_pmic not use(0)
- <6>[ 8.109791] [c4] [0][0][10][ch0] gpio function cfg is seted
- <6>[ 8.109798] [0][0][11][af0] gpio function cfg is seted[0][1][1][off0] gpio function cfg is seted
- <6>[ 8.110085] [@][VID] exynos-fimc-is-sensor9(109) is created
- <6>[ 8.110093] [c4] [@][CP9:V:X] fimc_is_comp_video_probe(0)
- <6>[ 8.110101] [c4] [@][COMP:D] fimc_is_companion_probe(0)
- <6>[ 8.110477] [c4] sec-thermistor sec_thermistor.27: SEC Thermistor successfully probed.
- <7>[ 8.110535] [c4] of_get_named_gpio_flags: can't parse gpios property
- <4>[ 8.110546] [c4] CPU: 4 PID: 1588 Comm: kworker/u16:3 Not tainted 3.10.9 #2
- <4>[ 8.110561] [c4] Workqueue: deferwq deferred_probe_work_func
- <4>[ 8.110569] [c4] Backtrace:
- <4>[ 8.110586] [c4] [<c0012084>] (dump_backtrace+0x0/0x10c) from [<c0012360>] (show_stack+0x18/0x1c)
- <4>[ 8.110594] [c4] r6:c0c4d3c4 r5:00000000 r4:fffffffe r3:00000200
- <4>[ 8.110615] [c4] [<c0012348>] (show_stack+0x0/0x1c) from [<c083759c>] (dump_stack+0x20/0x28)
- <4>[ 8.110630] [c4] [<c083757c>] (dump_stack+0x0/0x28) from [<c02ac95c>] (of_get_named_gpio_flags+0xac/0xc4)
- <4>[ 8.110643] [c4] [<c02ac8b0>] (of_get_named_gpio_flags+0x0/0xc4) from [<c03a63fc>] (arizona_of_get_named_gpio+0x2c/0x64)
- <4>[ 8.110650] [c4] r4:e5892810
- <4>[ 8.110664] [c4] [<c03a63d0>] (arizona_of_get_named_gpio+0x0/0x64) from [<c05d86a4>] (arizona_extcon_probe+0x618/0xc68)
- <4>[ 8.110671] [c4] r6:00000000 r5:e5616410 r4:e5892810 r3:ffffffff
- <4>[ 8.110690] [c4] [<c05d808c>] (arizona_extcon_probe+0x0/0xc68) from [<c037cab8>] (platform_drv_probe+0x20/0x24)
- <4>[ 8.110702] [c4] [<c037ca98>] (platform_drv_probe+0x0/0x24) from [<c037b76c>] (driver_probe_device+0x10c/0x218)
- <4>[ 8.110713] [c4] [<c037b660>] (driver_probe_device+0x0/0x218) from [<c037b958>] (__device_attach+0x48/0x4c)
- <4>[ 8.110720] [c4] r7:c0eb4d9c r6:c037b910 r5:e5893010 r4:c0e78940
- <4>[ 8.110738] [c4] [<c037b910>] (__device_attach+0x0/0x4c) from [<c0379b9c>] (bus_for_each_drv+0x4c/0x94)
- <4>[ 8.110745] [c4] r5:e5893010 r4:00000000
- <4>[ 8.110759] [c4] [<c0379b50>] (bus_for_each_drv+0x0/0x94) from [<c037b61c>] (device_attach+0x78/0x90)
- <4>[ 8.110766] [c4] r6:c0e5cdb8 r5:e5893044 r4:e5893010
- <4>[ 8.110781] [c4] [<c037b5a4>] (device_attach+0x0/0x90) from [<c037ab74>] (bus_probe_device+0x8c/0xb0)
- <4>[ 8.110788] [c4] r6:c0e5cdb8 r5:e5893010 r4:e6be1780 r3:e69bfc00
- <4>[ 8.110806] [c4] [<c037aae8>] (bus_probe_device+0x0/0xb0) from [<c037afe4>] (deferred_probe_work_func+0x3c/0x118)
- <4>[ 8.110813] [c4] r6:e5893010 r5:c0e5cd74 r4:e6be1780 r3:00000000
- <4>[ 8.110833] [c4] [<c037afa8>] (deferred_probe_work_func+0x0/0x118) from [<c0045c50>] (process_one_work+0x14c/0x468)
- <4>[ 8.110845] [c4] [<c0045b04>] (process_one_work+0x0/0x468) from [<c0046370>] (worker_thread+0x138/0x388)
- <4>[ 8.110857] [c4] [<c0046238>] (worker_thread+0x0/0x388) from [<c004c084>] (kthread+0xac/0xb8)
- <4>[ 8.110868] [c4] [<c004bfd8>] (kthread+0x0/0xb8) from [<c000e718>] (ret_from_fork+0x14/0x3c)
- <4>[ 8.110875] [c4] r7:00000000 r6:00000000 r5:c004bfd8 r4:e59a3e60
- <6>[ 8.126206] [c0] arizona spi1.0: Detected jack removal
- <6>[ 8.126448] [c0] florida-codec florida-codec: SET GAIN 0 step for 2147483647 ohms
- <6>[ 8.126460] [c0] florida-codec florida-codec: pacific_arizona_micd_cb: ear_mic = 0
- <4>[ 8.127461] [c0] arizona spi1.0: Spurious HPDET IRQ
- <6>[ 8.127619] [c4] input: Headset as /devices/14d30000.spi/spi_master/spi1/spi1.0/arizona-extcon/input/input4
- <6>[ 8.129105] [c7] mif: modem_probe: mif_sipc5.31
- <6>[ 8.129122] [c7] mif: parse_dt_iodevs_pdata: umts_ipc0
- <6>[ 8.129134] [c7] mif: parse_dt_iodevs_pdata: umts_rfs0
- <6>[ 8.129144] [c7] mif: parse_dt_iodevs_pdata: umts_boot0
- <6>[ 8.129155] [c7] mif: parse_dt_iodevs_pdata: multipdp
- <6>[ 8.129165] [c7] mif: parse_dt_iodevs_pdata: umts_router
- <6>[ 8.129175] [c7] mif: parse_dt_iodevs_pdata: umts_csd
- <6>[ 8.129184] [c7] mif: parse_dt_iodevs_pdata: umts_dm0
- <6>[ 8.129194] [c7] mif: parse_dt_iodevs_pdata: umts_log
- <6>[ 8.129204] [c7] mif: parse_dt_iodevs_pdata: rmnet0
- <6>[ 8.129214] [c7] mif: parse_dt_iodevs_pdata: rmnet1
- <6>[ 8.129223] [c7] mif: parse_dt_iodevs_pdata: rmnet2
- <6>[ 8.129233] [c7] mif: parse_dt_iodevs_pdata: rmnet3
- <6>[ 8.129243] [c7] mif: parse_dt_iodevs_pdata: rmnet4
- <6>[ 8.129252] [c7] mif: parse_dt_iodevs_pdata: ipc_loopback0
- <6>[ 8.129262] [c7] mif: parse_dt_iodevs_pdata: umts_ciq0
- <6>[ 8.129272] [c7] mif: parse_dt_iodevs_pdata: umts_calibcmd
- <6>[ 8.129281] [c7] mif: modem_if_parse_dt_pdata: DT parse complete!
- <7>[ 8.129577] [c7] of_get_named_gpio_flags exited with status 121
- <6>[ 8.129982] [c7] mif: board_gpio_export: cp_on exported
- <7>[ 8.129996] [c7] of_get_named_gpio_flags exited with status 41
- <7>[ 8.130011] [c7] of_get_named_gpio_flags exited with status 118
- <6>[ 8.130223] [c7] mif: board_gpio_export: ap_dump_int exported
- <7>[ 8.130236] [c7] of_get_named_gpio_flags exited with status 42
- <6>[ 8.130444] [c7] mif: board_gpio_export: cp_resout exported
- <7>[ 8.130457] [c7] of_get_named_gpio_flags exited with status 19
- <7>[ 8.130482] [c7] of_get_named_gpio_flags exited with status 217
- <6>[ 8.130547] [c7] wake enabled for irq 735
- <6>[ 8.130555] [c7] mif: m74xx_init_modemctl_device: success
- <6>[ 8.130562] [c7] mif: create_modemctl_device: m74xx is created!!!
- <6>[ 8.130570] [c7] mif: hsic_create_link_device: Get tx qlen : 10
- <6>[ 8.130759] [c7] usbcore: registered new interface driver cdc_modem
- <6>[ 8.130772] [c7] mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe516b800)
- <6>[ 8.130780] [c7] mif: hsic_create_link_device: usb : create_link_device DONE
- <3>[ 8.130788] [c7] mif: modem_probe: link created: usb
- <6>[ 8.130796] [c7] mif: create_io_device: FMT device = umts_ipc0
- <6>[ 8.131061] [c7] mif: sipc_print_ops: umts_ipc0: sipc5_hdr_create_multifmt(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc5_recv_skb_miscdev_multifmt()
- <6>[ 8.131073] [c7] mif: sipc_print_ops: multifmt_length = sipc_hdr_multifmt_length()
- <6>[ 8.131084] [c7] mif: sipc_print_ops: header_parse_continue = sipc5_hdr_parse_multifmt_continue()
- <6>[ 8.131338] [c7] mif: sipc_print_ops: umts_rfs0: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
- <6>[ 8.131351] [c7] mif: create_io_device: Bood device = umts_boot0
- <6>[ 8.131861] [c7] mif: sipc_print_ops: multipdp: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
- <6>[ 8.132384] [c7] mif: sipc_print_ops: umts_router: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
- <6>[ 8.132911] [c7] mif: sipc_print_ops: umts_csd: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
- <3>[ 8.133369] [c7] mif: sipc5_init_io_device: dm_state : umts_dm0, sucess
- <6>[ 8.133386] [c7] mif: sipc_print_ops: umts_dm0: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
- <6>[ 8.133836] [c7] mif: sipc_print_ops: umts_log: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
- <6>[ 8.134958] [c7] mif: sipc_print_ops: rmnet0: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_netdev()
- <6>[ 8.135532] [c0] mif: phone_active_irq_handler: PA EVENT: pa = 0 cp_dump_int: 0
- <6>[ 8.135730] [c7] mif: sipc_print_ops: rmnet1: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_netdev()
- <6>[ 8.136392] [c7] mif: sipc_print_ops: rmnet2: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_netdev()
- <6>[ 8.137154] [c7] mif: sipc_print_ops: rmnet3: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_netdev()
- <6>[ 8.138167] [c7] mif: sipc_print_ops: rmnet4: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_netdev()
- <6>[ 8.138566] [c7] mif: sipc_print_ops: ipc_loopback0: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
- <6>[ 8.138956] [c7] mif: sipc_print_ops: umts_ciq0: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
- <6>[ 8.139398] [c7] mif: sipc_print_ops: umts_calibcmd: sipc5_hdr_create(), sipc5_hdr_parse(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
- <6>[ 8.139410] [c7] mif: modem_probe: Complete!!!
- <3>[ 8.139915] [c7] samsung-pinctrl 11090000.pinctrl: pin gpf0-5 already requested by mif_sipc5.31; cannot claim for link_pm_hsic.36
- <3>[ 8.139927] [c7] samsung-pinctrl 11090000.pinctrl: pin-133 (link_pm_hsic.36) status -22
- <3>[ 8.139937] [c7] samsung-pinctrl 11090000.pinctrl: could not request pin 133 on device samsung-pinctrl
- <3>[ 8.139946] [c7] link_pm_hsic link_pm_hsic.36: Error applying setting, reverse things back
- <7>[ 8.139978] [c7] of_get_named_gpio_flags exited with status 133
- <6>[ 8.140248] [c7] mif: board_gpio_export: hsic_resume_ac exported
- <7>[ 8.140260] [c7] of_get_named_gpio_flags exited with status 10
- <6>[ 8.140469] [c7] mif: board_gpio_export: hsic_wake_ca exported
- <7>[ 8.140483] [c7] of_get_named_gpio_flags exited with status 64
- <6>[ 8.140687] [c7] mif: board_gpio_export: hsic_wake_ac exported
- <7>[ 8.140699] [c7] of_get_named_gpio_flags exited with status 21
- <6>[ 8.140711] [c7] mif: link_pm_parse_dt_pdata: success
- <6>[ 8.141025] [c7] wake enabled for irq 737
- <6>[ 8.141075] [c7] mif: link_pm_probe: success
- <7>[ 8.141261] usb: init
- <7>[ 8.141607] [c7] usb: android_bind disconnect
- <6>[ 8.141791] [c7] file system registered
- <7>[ 8.144932] [c7] [mtp_setup] line = [1688]
- <7>[ 8.146049] [c7] usb: usb_string_id cdev(0xe57d7a80)->next_string_id=1
- <6>[ 8.146196] [c7] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 8.146206] [c7] android_usb gadget: Number of LUNs=1
- <6>[ 8.146215] [c7] lun0: LUN: removable file: (no medium)
- <7>[ 8.148217] [c7] usb: usb_string_id cdev(0xe57d7a80)->next_string_id=2
- <7>[ 8.148227] [c7] usb: usb_string_id cdev(0xe57d7a80)->next_string_id=3
- <7>[ 8.148238] [c7] usb: usb_string_id cdev(0xe57d7a80)->next_string_id=4
- <6>[ 8.148247] [c7] android_usb gadget: android_usb ready
- <6>[ 8.148647] [c7] usb_notifier: usb: of_get_usb_redriver_dt, gpios_redriver_en count -2
- <6>[ 8.148659] [c7] usb_notify: registered otg_notify +
- <6>[ 8.148898] [c7] usb_notify: registered otg_notify -
- <6>[ 8.148908] [c7] muic_notifier_register: listener=2 register
- <6>[ 8.148917] [c7] usb notifier: usb: usb_handle_notification - action=0, attached_dev=0
- <6>[ 8.148926] [c7] usb_notifier usb_notifier.13: usb notifier probe
- <7>[ 8.149333] [c7] of_get_named_gpio_flags exited with status 23
- <7>[ 8.149347] [c7] of_get_named_gpio_flags exited with status 17
- <7>[ 8.149359] [c7] of_get_named_gpio_flags exited with status 16
- <7>[ 8.149370] [c7] of_get_named_gpio_flags exited with status 3
- <7>[ 8.149437] [c7] gpiod_set_debounce: gpio-23 status -22
- <7>[ 8.149501] [c7] gpiod_set_debounce: gpio-17 status -22
- <7>[ 8.149543] [c7] gpiod_set_debounce: gpio-16 status -22
- <7>[ 8.149584] [c7] gpiod_set_debounce: gpio-3 status -22
- <6>[ 8.150162] [c7] input: gpio_keys.9 as /devices/gpio_keys.9/input/input5
- <6>[ 8.151179] [c7] input_booster input_booster.29: input_booster_init_dvfs: TOUCH is registered and intialized for touch dvfs
- <6>[ 8.151353] [c7] input_booster input_booster.29: input_booster_init_dvfs: PEN is registered and intialized for pen dvfs
- <4>[ 8.151541] [c7] hall_init start
- <7>[ 8.151835] [c7] of_get_named_gpio_flags exited with status 1
- <6>[ 8.152112] [c7] init_hall_ic_irq : success
- <6>[ 8.152509] [c7] input: hall as /devices/hall.10/input/input6
- <6>[ 8.154838] [c7] s2m-rtc s2m-rtc: s2m_rtc_read_time: 2017-07-10 17:34:02(0x02)PM
- <6>[ 8.154972] [c7] s2m-rtc s2m-rtc: setting system clock to 2017-07-10 17:34:02 UTC (1499708042)
- <6>[ 8.154982] [c7] Driver for 1-wire Dallas network protocol.
- <6>[ 8.155624] [c7] w1_gpio_probe : start
- <7>[ 8.155648] [c7] of_get_named_gpio_flags exited with status 191
- <7>[ 8.155658] [c7] of_get_named_gpio_flags exited with status 30
- <6>[ 8.155665] [c7] of_w1_gpio_dt : irq num (30)
- <6>[ 8.155672] [c7] w1_gpio_probe: IRQ mod is enabled
- <6>[ 8.155893] [c7] input: w1 as /devices/w1_gpio_exynos.11/input/input7
- <6>[ 8.156312] [c7] wake enabled for irq 745
- <6>[ 8.156363] [c0] w1_detect_irq : Inside W1 IRQ Handler
- <3>[ 8.156421] [c7] w1_uevent master_dev name = w1_bus_master1
- <6>[ 8.157004] [c7] [IPA] control_temp : 81
- <6>[ 8.157014] [c7] [IPA] temp_threshold : 30
- <6>[ 8.157021] [c7] [IPA] enabled : 1
- <6>[ 8.157028] [c7] [IPA] tdp : 3500
- <6>[ 8.157035] [c7] [IPA] boost : 1
- <6>[ 8.157042] [c7] [IPA] ros_power : 500
- <6>[ 8.157049] [c7] [IPA] a7_weight : 1024
- <6>[ 8.157056] [c7] [IPA] a15_weight : 256
- <6>[ 8.157062] [c7] [IPA] gpu_weight : 256
- <6>[ 8.157069] [c7] [IPA] a7_max_power : 1000
- <6>[ 8.157076] [c7] [IPA] a15_max_power : 6552
- <6>[ 8.157082] [c7] [IPA] gpu_max_power : 3110
- <6>[ 8.157089] [c7] [IPA] hotplug_in_threshold : 0
- <6>[ 8.157096] [c7] [IPA] hotplug_out_threshold : 10
- <6>[ 8.157103] [c7] [IPA] enable_ctlr : 1
- <6>[ 8.157110] [c7] [IPA] ctlr.mult : 2
- <6>[ 8.157117] [c7] [IPA] ctlr.k_i : 1
- <6>[ 8.157123] [c7] [IPA] ctlr.k_d : 0
- <6>[ 8.157131] [c7] [IPA] ctlr.feed_forward : 1
- <6>[ 8.157138] [c7] [IPA] ctlr.integral_reset_value : 0
- <6>[ 8.157145] [c7] [IPA] ctlr.integral_cutoff : 0
- <6>[ 8.157152] [c7] [IPA] ctlr.integral_reset_threshold : 10
- <6>[ 8.157160] [c7] Deferring initialisation...
- <6>[ 8.157166] muic_notifier_register: listener=6 register
- <6>[ 8.157895] [c7] no subsys buffer
- <6>[ 8.160143] [c7] DEVFREQ(MIF) : default dll satus : on
- <6>[ 8.160161] [c7] DEVFREQ(MIF) : 825000Khz, 962500V
- <6>[ 8.160169] [c7] DEVFREQ(MIF) : 825000Khz, ABB 8
- <6>[ 8.160178] [c7] DEVFREQ(MIF) : 667000Khz, 912500V
- <6>[ 8.160185] [c7] DEVFREQ(MIF) : 667000Khz, ABB 8
- <6>[ 8.160192] [c7] DEVFREQ(MIF) : 543000Khz, 850000V
- <6>[ 8.160199] [c7] DEVFREQ(MIF) : 543000Khz, ABB 8
- <6>[ 8.160206] [c7] DEVFREQ(MIF) : 413000Khz, 800000V
- <6>[ 8.160213] [c7] DEVFREQ(MIF) : 413000Khz, ABB 8
- <6>[ 8.160220] [c7] DEVFREQ(MIF) : 272000Khz, 787500V
- <6>[ 8.160227] [c7] DEVFREQ(MIF) : 272000Khz, ABB 8
- <6>[ 8.160233] [c7] DEVFREQ(MIF) : 222000Khz, 787500V
- <6>[ 8.160240] [c7] DEVFREQ(MIF) : 222000Khz, ABB 8
- <6>[ 8.160247] [c7] DEVFREQ(MIF) : 167000Khz, 787500V
- <6>[ 8.160254] [c7] DEVFREQ(MIF) : 167000Khz, ABB 8
- <6>[ 8.160261] [c7] DEVFREQ(MIF) : 136000Khz, 787500V
- <6>[ 8.160267] [c7] DEVFREQ(MIF) : 136000Khz, ABB 8
- <6>[ 8.160274] [c7] DEVFREQ(MIF) : 109000Khz, 787500V
- <6>[ 8.160281] [c7] DEVFREQ(MIF) : 109000Khz, ABB 8
- <6>[ 8.160288] [c7] DEVFREQ(MIF) : 78000Khz, 787500V
- <6>[ 8.160295] [c7] DEVFREQ(MIF) : 78000Khz, ABB 8
- <6>[ 8.163749] [c7] DEVFREQ(INT) : 400000Khz, 950000V
- <6>[ 8.163759] [c7] DEVFREQ(INT) : 400000Khz, ABB 8
- <6>[ 8.163767] [c7] DEVFREQ(INT) : 334000Khz, 887500V
- <6>[ 8.163774] [c7] DEVFREQ(INT) : 334000Khz, ABB 8
- <6>[ 8.163782] [c7] DEVFREQ(INT) : 267000Khz, 875000V
- <6>[ 8.163788] [c7] DEVFREQ(INT) : 267000Khz, ABB 8
- <6>[ 8.163796] [c7] DEVFREQ(INT) : 200000Khz, 862500V
- <6>[ 8.163803] [c7] DEVFREQ(INT) : 200000Khz, ABB 8
- <6>[ 8.163810] [c7] DEVFREQ(INT) : 160000Khz, 812500V
- <6>[ 8.163817] [c7] DEVFREQ(INT) : 160000Khz, ABB 8
- <6>[ 8.163824] [c7] DEVFREQ(INT) : 133000Khz, 812500V
- <6>[ 8.163831] [c7] DEVFREQ(INT) : 133000Khz, ABB 8
- <6>[ 8.163838] [c7] DEVFREQ(INT) : 100000Khz, 812500V
- <6>[ 8.163845] [c7] DEVFREQ(INT) : 100000Khz, ABB 8
- <6>[ 8.165575] [c7] DEVFREQ(DISP) : 334000Khz
- <6>[ 8.165585] [c7] DEVFREQ(DISP) : 222000Khz
- <6>[ 8.165593] [c7] DEVFREQ(DISP) : 167000Khz
- <6>[ 8.165600] [c7] DEVFREQ(DISP) : 134000Khz
- <6>[ 8.166712] [c7] DEVFREQ(ISP) : 777000Khz, 950000V
- <6>[ 8.166722] [c7] DEVFREQ(ISP) : 666000Khz, 950000V
- <6>[ 8.166730] [c7] DEVFREQ(ISP) : 600000Khz, 950000V
- <6>[ 8.166738] [c7] DEVFREQ(ISP) : 580000Khz, 950000V
- <6>[ 8.166745] [c7] DEVFREQ(ISP) : 555000Khz, 925000V
- <6>[ 8.166752] [c7] DEVFREQ(ISP) : 444000Khz, 912500V
- <6>[ 8.166760] [c7] DEVFREQ(ISP) : 333000Khz, 912500V
- <6>[ 8.166767] [c7] DEVFREQ(ISP) : 222000Khz, 900000V
- <6>[ 8.166774] [c7] DEVFREQ(ISP) : 200000Khz, 900000V
- <6>[ 8.166782] [c7] DEVFREQ(ISP) : 111000Khz, 887500V
- <6>[ 8.166789] [c7] DEVFREQ(ISP) : 66000Khz, 887500V
- <6>[ 8.170673] [c7] sec_bat_parse_dt : inbat_voltage is Empty
- <6>[ 8.170878] [c7] sec_bat_parse_dt: vendor : SDI SDI, technology : 2, cable_check_type : 4
- <6>[ 8.170878] cable_source_type : 1, event_waiting_time : 600
- <6>[ 8.170878] polling_type : 1, initial_count : 0, check_count : 0
- <6>[ 8.170878] check_adc_max : 1440, check_adc_min : 0
- <6>[ 8.170878] ovp_uvlo_check_type : 3, thermal_source : 2
- <6>[ 8.170878] temp_check_type : 2, temp_check_count : 1
- <6>[ 8.170878] temp_high_threshold_even : 700, temp_high_recovery_event : 460
- <6>[ 8.173398] [c4] muic_notifier_register: listener=4 register
- <6>[ 8.173412] [c4] sec-battery battery.30: batt_handle_notification: current_cable(1), wc_status(0), wire_status(1)
- <6>[ 8.173420] [c4] batt_handle_notification : HV_CHARGER_NAME(NONE)
- <6>[ 8.173429] [c4] sec-battery battery.30: batt_handle_notification: Cable is Not Changed(1)
- <6>[ 8.173437] [c4] batt_handle_notification: CMD=DETACH, attached_dev=0
- <6>[ 8.173446] [c4] muic-max77843-hv:max77843_hv_muic_charger_init
- <6>[ 8.173454] [c4] cable_initial_check : current_cable_type : (1)
- <6>[ 8.173708] [c4] muic-max77843:max77843_hv_muic_detect_after_charger_init
- <6>[ 8.173738] [c4] sec-battery battery.30: sec_battery_probe: SEC Battery Driver Monitorwork
- <6>[ 8.173756] [c4] sec-battery battery.30: sec_battery_probe: SEC Battery Driver Loaded
- <6>[ 8.173968] [c6] fg_read_vcell: VCELL(3676), data(0xb7d0)
- <6>[ 8.175001] [c6] fg_read_vcell: VCELL(3676), data(0xb7d0)
- <6>[ 8.175184] [c4] muic-max77843-hv:max77843_hv_muic_detect_after_charger_init STATUS3:0x00
- <6>[ 8.175222] [c7] ice5lp_init: ret(0)
- <6>[ 8.175701] [c4] net/netfilter/nf_queue.c:nf_register_queue_handler_is_null queue handler is not null!
- <6>[ 8.175736] [c4] PM DOMAIN: Power off unused power domains.
- <6>[ 8.176301] [c5] ALSA device list:
- <6>[ 8.176311] [c5] #0: Pacific WM5110 Sound
- <6>[ 8.176318] [c5] #1: Pacific HDMI
- <6>[ 8.176349] [c4] PM DOMAIN: pd-isp power down success
- <3>[ 8.176355] [c5] Warning: unable to open an initial console.
- <6>[ 8.176367] [c5] kernel_init: GPIO DVS: check init gpio
- <6>[ 8.176924] [c4] PM DOMAIN: pd-cam0 power down success
- <6>[ 8.177257] [c4] PM DOMAIN: pd-cam1 power down success
- <7>[ 8.181033] [c6] SELinux: 2048 avtab hash slots, 4485 rules.
- <7>[ 8.182329] [c6] SELinux: 2048 avtab hash slots, 4485 rules.
- <7>[ 8.182351] [c6] SELinux: 1 users, 2 roles, 375 types, 0 bools, 1 sens, 1024 cats
- <7>[ 8.182363] [c6] SELinux: 86 classes, 4485 rules
- <7>[ 8.183053] [c6] SELinux: Completing initialization.
- <7>[ 8.183061] [c6] SELinux: Setting up existing superblocks.
- <7>[ 8.183077] [c6] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <7>[ 8.183092] [c6] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- <7>[ 8.183456] [c6] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- <7>[ 8.183470] [c6] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- <7>[ 8.183490] [c6] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 8.183507] [c6] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
- <7>[ 8.183968] [c6] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <7>[ 8.187137] [c6] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[ 8.187152] [c6] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[ 8.187163] [c6] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[ 8.187176] [c6] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[ 8.187195] [c6] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[ 8.187251] [c6] SELinux: initialized (dev configfs, type configfs), not configured for labeling
- <7>[ 8.187263] [c6] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 8.187289] [c6] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <6>[ 8.210693] [c7] [FG] 0080h,ff00h,7f80h,ff01h,3480h,09b3h,26cbh,60e0h,2480h,b7d0h,ef3fh,f104h,0068h,26ceh,2783h,0a1fh,1960h,0532h,2080h,5a00h,02ech,0148h,2472h,000eh,19c8h,b887h,2716h,c5a5h,0aadh,0314h,01e0h,09b8h,ffffh,20b0h,1800h,19c8h,1400h,2305h,2472h,7fe4h,2602h,cea4h,203bh,0870h,e3e1h,290eh,0400h,0000h,533bh,71cfh,0900h,037fh,0000h,1900h,e638h,05e0h,0063h,0836h,a554h,f104h,1680h,1008h,e635h,e000h,0000h,0000h,0780h,0000h,bbf7h,06adh,3496h,0065h,2787h,2271h,0a04h,0000h,fb2ch,faeeh,f567h,0000h,0000h,0000h,7f80h,0000h,0000h,0005h,0932h,05d0h,0000h,006bh,090ch,0050h,03f7h,0204h,0000h,0000h,03cah,100fh,0c0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0007h,ffffh,286ah,0a18h,1915h,04bbh,2d00h,0008h,167eh,0000h,7fffh,ffffh,4c40h,fff0h,4200h,0000h,4000h,0000h,ac10h,1110h,0000h,0000h,0000h,0000h,27deh,0000h,0140h,00e3h,3ff2h,4d32h,f94fh,be56h,005eh,2910h,b7d0h,2669h,
- <6>[ 8.211113] [c7] fg_read_vcell: VCELL(3676), data(0xb7d0)
- <6>[ 8.211335] [c7] sec-battery battery.30: sec_bat_get_temperature_by_adc: Temp(365), Temp-ADC(1518)
- <7>[ 8.211482] [c7] fg_write_temp: temperature to (365, 0x2480)
- <6>[ 8.211882] [c7] max77843_fg_check_qrtable: QRTABLE20_REG(0x0900), QRTABLE30_REG(0x0780)
- <6>[ 8.212101] [c7] sec-battery battery.30: sec_bat_get_temperature_by_adc: Temp(366), Temp-ADC(1516)
- <6>[ 8.212319] [c7] sec-battery battery.30: sec_bat_get_temperature_by_adc: Temp(364), Temp-ADC(1357)
- <6>[ 8.212723] [c7] fg_read_vcell: VCELL(3676), data(0xb7d0)
- <6>[ 8.214356] [c7] fg_read_vcell: VCELL(3676), data(0xb7d0)
- <6>[ 8.249792] [c7] [FG] 0080h,ff00h,7f80h,ff01h,3480h,09b3h,26cbh,60e0h,2480h,b7d0h,ef3fh,f104h,0068h,26ceh,2783h,0a1fh,1960h,0532h,2080h,5a00h,02ech,0148h,2472h,000eh,19c8h,b887h,2716h,c5a5h,0aadh,0314h,01e0h,09b8h,ffffh,20b0h,1800h,19c8h,1400h,2305h,2472h,7fe4h,2602h,cea4h,203bh,0870h,e3e1h,290eh,0400h,0000h,533bh,71cfh,0900h,037fh,0000h,1900h,e638h,05e0h,0063h,0836h,a554h,f104h,1680h,1008h,e635h,e000h,0000h,0000h,0780h,0000h,bbf7h,06adh,3496h,0065h,2787h,2271h,0a04h,0000h,fb2ch,faeeh,f567h,0000h,0000h,0000h,7f80h,0000h,0000h,0005h,0932h,05d0h,0000h,006bh,090ch,0050h,03f7h,0204h,0000h,0000h,03cah,100fh,0c0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0007h,ffffh,286ah,0a18h,0338h,2910h,c500h,ff80h,4c40h,0000h,7700h,fffeh,4c40h,fff0h,4200h,0000h,4000h,0000h,ac10h,1110h,0000h,0000h,0000h,0000h,279bh,0000h,0140h,fc1bh,3ff2h,4de8h,fb20h,be56h,005eh,2910h,b982h,2669h,
- <6>[ 8.250203] [c7] fg_read_vcell: VCELL(3710), data(0xb982)
- <7>[ 8.250418] [c7] get_fuelgauge_soc: soc(387), low_batt_alarm(0)
- <7>[ 8.250427] [c7] max77843_fg_get_scaled_capacity: scaled capacity (39.0)
- <6>[ 8.250440] [c7] sec-battery battery.30: sec_bat_get_battery_info:Vnow(3676mV),Inow(-670mA),Imax(0mA),SOC(39%),Tbat(365)
- <6>[ 8.250628] [c7] max77843_check_battery : CHG_INT_OK(0x9d)
- <6>[ 8.250810] [c7] max77843_check_battery : CHG_DETAILS00(0x0)
- <6>[ 8.250819] [c7] sec-battery battery.30: sec_bat_battery_cable_check: Battery Connected
- <6>[ 8.251005] [c7] max77843_get_float_voltage: battery cv voltage 0x1f
- <6>[ 8.251014] [c7] sec_bat_swelling_check: status(2), swell_mode(0), cv(0x1f), temp(365)
- <6>[ 8.251021] [c7] sec_bat_swelling_check: DISCHARGING or NOT-CHARGING. stop swelling mode
- <6>[ 8.251033] [c7] sec-battery battery.30: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(1), level(100%), HV(NONE)
- <3>[ 8.476083] [c6] init: /init.rc: 67: invalid command 'load_system_props'
- <3>[ 8.476151] [c6] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
- <3>[ 8.476243] [c6] init: could not import file '/init.recovery.vold_decrypt.rc' from '/init.rc'
- <3>[ 8.573415] [c5] w1_uevent master_dev name = w1_bus_master1
- <3>[ 8.627801] [c5] power_supply max77843-fuelgauge: driver failed to report `status' property: -22
- <6>[ 8.629213] [c5] max77843_get_charger_state : charger status (0x38)
- <6>[ 8.629616] [c5] max77843_check_battery : CHG_INT_OK(0x9d)
- <6>[ 8.629958] [c5] max77843_check_battery : CHG_DETAILS00(0x0)
- <6>[ 8.630246] [c5] max77843_get_charging_health: reg_data(0x3)
- <6>[ 8.630537] [c5] max77843_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- <6>[ 8.631055] [c5] max77843_get_charging_health: vbus_state : 0x0, chg_dtls : 0x8
- <7>[ 8.631594] [c5] max77843_chg_get_property : set-current(0mA), current now(500mA)
- <6>[ 8.631782] [c5] max77843_get_float_voltage: battery cv voltage 0x1f
- <6>[ 8.651903] [c0] w1_irqwork : Inside W1 While Loop(1)
- <6>[ 8.656996] [c7] cluster: 0 freq: 500000 power=35
- <6>[ 8.657006] [c7] cluster: 0 freq: 600000 power=45
- <6>[ 8.657014] [c7] cluster: 0 freq: 700000 power=56
- <6>[ 8.657022] [c7] cluster: 0 freq: 800000 power=69
- <6>[ 8.657029] [c7] cluster: 0 freq: 900000 power=84
- <6>[ 8.657036] [c7] cluster: 0 freq: 1000000 power=105
- <6>[ 8.657043] [c7] cluster: 0 freq: 1100000 power=123
- <6>[ 8.657054] [c7] cluster: 0 freq: 1200000 power=142
- <6>[ 8.657061] [c7] cluster: 0 freq: 1300000 power=168
- <4>[ 8.657069] [c7] get_power_value: freq: 1400000 for cluster: 0 is greater than max. freq: 1300000
- <6>[ 8.657076] [c7] cluster: 0 freq: 1300000 power=182
- <4>[ 8.657084] [c7] get_power_value: freq: 1500000 for cluster: 0 is greater than max. freq: 1300000
- <6>[ 8.657092] [c7] cluster: 0 freq: 1300000 power=194
- <6>[ 8.657101] [c7] cluster: 1 freq: 800000 power=345
- <6>[ 8.657108] [c7] cluster: 1 freq: 900000 power=413
- <6>[ 8.657115] [c7] cluster: 1 freq: 1000000 power=478
- <6>[ 8.657122] [c7] cluster: 1 freq: 1100000 power=559
- <6>[ 8.657129] [c7] cluster: 1 freq: 1200000 power=635
- <6>[ 8.657136] [c7] cluster: 1 freq: 1300000 power=729
- <6>[ 8.657143] [c7] cluster: 1 freq: 1400000 power=814
- <6>[ 8.657149] [c7] cluster: 1 freq: 1500000 power=922
- <6>[ 8.657156] [c7] cluster: 1 freq: 1600000 power=1055
- <6>[ 8.657163] [c7] cluster: 1 freq: 1700000 power=1222
- <6>[ 8.657170] [c7] cluster: 1 freq: 1800000 power=1359
- <6>[ 8.657177] [c7] cluster: 1 freq: 1900000 power=1528
- <4>[ 8.657184] [c7] get_power_value: freq: 2000000 for cluster: 1 is greater than max. freq: 1900000
- <6>[ 8.657191] [c7] cluster: 1 freq: 1900000 power=1609
- <6>[ 8.657202] [c7] Intelligent Power Allocation initialised.
- <6>[ 8.707097] [c0] w1_irqwork : Inside W1 While Loop(2)
- <6>[ 8.761987] [c0] w1_irqwork : Inside W1 While Loop(3)
- <6>[ 8.817012] [c0] w1_irqwork : Inside W1 While Loop(4)
- <6>[ 8.872001] [c0] w1_irqwork : Inside W1 While Loop(5)
- <3>[ 8.942214] [c6] init: Failed to read from /dev/hw_random: Try again
- <7>[ 8.942781] [c6] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <3>[ 8.951948] [c6] init: Failed to read from /dev/hw_random: Try again
- <7>[ 8.952746] [c6] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
- <7>[ 8.952857] [c6] usb: enable_store enabled=0, !dev->enabled=1
- <3>[ 8.952865] [c6] android_usb: already disabled
- <7>[ 8.953018] [c6] usb: functions_store buff=adb
- <7>[ 8.953027] [c6] usb: android_enable_function name=ffs
- <3>[ 8.953198] [c6] init: Unable to open persistent property directory /data/property errno: 2
- <3>[ 8.953230] [c6] init: Unable to open persistent property directory /data/property errno: 2
- <7>[ 8.954209] [c6] usb: enable_store enabled=0, !dev->enabled=1
- <3>[ 8.954218] [c6] android_usb: already disabled
- <7>[ 8.954534] [c6] usb: enable_store enabled=1, !dev->enabled=1
- <7>[ 8.954545] [c6] usb: enable_store f:ffs
- <7>[ 8.954559] [c6] usb: enable_store vendor=18d1,product=d002,bcdDevice=ffff
- <7>[ 8.954568] ,Class=0,SubClass=0,Protocol=0
- <7>[ 8.954577] [c6] usb: enable_store next cmd : usb_add_config
- <6>[ 8.956757] [c4] read descriptors
- <6>[ 8.956769] [c4] read strings
- <7>[ 8.956792] [c4] usb: usb_string_ids_n --cdev(0xe57d7a80)->next_string_id=4
- <7>[ 8.956975] [c4] usb: android_bind_enabled_functions f:ffs
- <6>[ 8.968292] [c7] lcd panel: caps: 1, temperature: 0, elvss: 25, 120a9c
- <6>[ 8.969234] [c7] lcd panel: brightness=255, bl=64, candela=360
- <4>[ 8.970630] [c6] avc: denied { set } for property=twrp.crash_counter scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
- <3>[ 8.972937] [c6] SEIREN: ERR: Failed to requset firmware[seiren_fw_sram.bin]
- <6>[ 8.988122] [c7] s5p-decon-display 13800000.decon_fb: +s3c_fb_blank: 4
- <6>[ 8.988160] [c7] s5p-decon-display 13800000.decon_fb: pcd_detection_disable: pcd_detected 0, pcd gpio 1
- <4>[ 8.988171] [c7] s5p-decon-display 13800000.decon_fb: pm_relax
- <6>[ 8.988231] s5p-decon-display 13800000.decon_fb: +s5p_mipi_dsi_disable
- <6>[ 8.988242] [c7] lcd panel: + s6e3ha2_power_off
- <6>[ 8.988253] [c7] s5p-decon-display 13800000.decon_fb: esd_fg_enable: disable, gpio: 0, state: 0
- <6>[ 8.988303] [c7] lcd panel: + s6e3ha2_ldi_disable
- <6>[ 8.988384] [c7] lcd panel: DISPLAY_OFF
- <6>[ 9.112114] [c7] lcd panel: - s6e3ha2_ldi_disable
- <6>[ 9.112123] [c7] lcd panel: - s6e3ha2_power_off
- <6>[ 9.120446] [c7] s5p-decon-display 13800000.decon_fb: -s5p_mipi_dsi_disable
- <6>[ 9.120726] [c7] s5p-decon-display 13800000.decon_fb: -s3c_fb_blank: 4, 0
- <6>[ 9.120738] [c7] mdnie mdnie: fb_notifier_callback: 4
- <6>[ 9.120743] [c7] LCD is off
- <6>[ 9.120785] [c7] s5p-decon-display 13800000.decon_fb: +s3c_fb_blank: 0
- <6>[ 9.121326] [c7] s5p-decon-display 13800000.decon_fb: +s5p_mipi_dsi_enable
- <6>[ 9.161064] [c7] lcd panel: + s6e3ha2_power_on
- <6>[ 9.161161] [c0] lcd panel: oled_det_isr: oled_det(1) is detected
- <6>[ 9.292954] [c4] s5p-decon-display 13800000.decon_fb: rx fifo : 1600031c, response : 1c, rx_size : 3
- <3>[ 9.296513] [c4] s5p-decon-display 13800000.decon_fb: DSI protocol violation!
- <3>[ 9.300810] [c4] lcd panel: mipi_read failed retry ret = -1 ..
- <6>[ 9.301285] [c4] lcd panel: DISPLAY_ON
- <6>[ 9.302654] [c4] lcd panel: caps: 1, temperature: 0, elvss: 25, 120a9c
- <6>[ 9.303075] [c4] lcd panel: vint: 21
- <6>[ 9.304751] [c4] lcd panel: acl: 0, auto_brightness: 0
- <6>[ 9.304802] [c4] lcd panel: temperature: 25, tset: 25
- <6>[ 9.304841] [c4] lcd panel: hbm: 0, auto_brightness: 0
- <6>[ 9.304882] [c4] lcd panel: brightness=255, bl=64, candela=360
- <6>[ 9.304893] [c4] s5p-decon-display 13800000.decon_fb: esd_fg_enable: enable, gpio: 0, state: 0
- <6>[ 9.304903] [c4] lcd panel: - s6e3ha2_power_on
- <6>[ 9.304910] [c4] s5p-decon-display 13800000.decon_fb: -s5p_mipi_dsi_enable
- <4>[ 9.304921] [c4] s5p-decon-display 13800000.decon_fb: pm_stay_awake
- <6>[ 9.305066] s5p-decon-display 13800000.decon_fb: pcd_detection_enable: pcd_detected 0, pcd gpio 1
- <6>[ 9.305075] [c4] s5p-decon-display 13800000.decon_fb: -s3c_fb_blank: 0, 0
- <6>[ 9.305086] [c4] mdnie mdnie: fb_notifier_callback: 0
- <6>[ 9.328750] [c4] mdnie mdnie: STANDARD_UI
- <6>[ 9.328758] [c4] LCD is on
- <6>[ 9.406187] [c4] s5p-decon-display 13800000.decon_fb: +s3c_fb_blank: 4
- <6>[ 9.406325] [c4] s5p-decon-display 13800000.decon_fb: pcd_detection_disable: pcd_detected 0, pcd gpio 1
- <4>[ 9.406336] [c4] s5p-decon-display 13800000.decon_fb: pm_relax
- <6>[ 9.406494] s5p-decon-display 13800000.decon_fb: +s5p_mipi_dsi_disable
- <6>[ 9.406506] [c4] lcd panel: + s6e3ha2_power_off
- <6>[ 9.406517] [c4] s5p-decon-display 13800000.decon_fb: esd_fg_enable: disable, gpio: 0, state: 0
- <6>[ 9.406568] [c4] lcd panel: + s6e3ha2_ldi_disable
- <6>[ 9.406660] [c4] lcd panel: DISPLAY_OFF
- <6>[ 9.526860] [c4] lcd panel: - s6e3ha2_ldi_disable
- <6>[ 9.526868] [c4] lcd panel: - s6e3ha2_power_off
- <6>[ 9.535181] [c4] s5p-decon-display 13800000.decon_fb: -s5p_mipi_dsi_disable
- <6>[ 9.535411] [c4] s5p-decon-display 13800000.decon_fb: -s3c_fb_blank: 4, 0
- <6>[ 9.535422] [c4] mdnie mdnie: fb_notifier_callback: 4
- <6>[ 9.535428] [c4] LCD is off
- <6>[ 9.535469] [c4] s5p-decon-display 13800000.decon_fb: +s3c_fb_blank: 0
- <6>[ 9.536068] [c4] s5p-decon-display 13800000.decon_fb: +s5p_mipi_dsi_enable
- <6>[ 9.575179] [c4] lcd panel: + s6e3ha2_power_on
- <6>[ 9.575272] [c0] lcd panel: oled_det_isr: oled_det(1) is detected
- <6>[ 9.707946] [c4] s5p-decon-display 13800000.decon_fb: rx fifo : 1600031c, response : 1c, rx_size : 3
- <3>[ 9.713043] [c4] s5p-decon-display 13800000.decon_fb: DSI protocol violation!
- <3>[ 9.717102] [c4] lcd panel: mipi_read failed retry ret = -1 ..
- <6>[ 9.717603] [c4] lcd panel: DISPLAY_ON
- <6>[ 9.719297] [c4] lcd panel: caps: 1, temperature: 0, elvss: 25, 120a9c
- <6>[ 9.719727] [c4] lcd panel: vint: 21
- <6>[ 9.720682] [c4] lcd panel: acl: 0, auto_brightness: 0
- <6>[ 9.720727] [c4] lcd panel: temperature: 25, tset: 25
- <6>[ 9.720765] [c4] lcd panel: hbm: 0, auto_brightness: 0
- <6>[ 9.720805] [c4] lcd panel: brightness=255, bl=64, candela=360
- <6>[ 9.720816] [c4] s5p-decon-display 13800000.decon_fb: esd_fg_enable: enable, gpio: 0, state: 0
- <6>[ 9.720826] [c4] lcd panel: - s6e3ha2_power_on
- <6>[ 9.720833] [c4] s5p-decon-display 13800000.decon_fb: -s5p_mipi_dsi_enable
- <4>[ 9.720844] [c4] s5p-decon-display 13800000.decon_fb: pm_stay_awake
- <6>[ 9.720986] s5p-decon-display 13800000.decon_fb: pcd_detection_enable: pcd_detected 0, pcd gpio 1
- <6>[ 9.720995] [c4] s5p-decon-display 13800000.decon_fb: -s3c_fb_blank: 0, 0
- <6>[ 9.721006] [c4] mdnie mdnie: fb_notifier_callback: 0
- <6>[ 9.743222] [c4] mdnie mdnie: STANDARD_UI
- <6>[ 9.743231] [c4] LCD is on
- <6>[ 9.819018] [c4] fts_touch 4-0049: fts_start_device
- <3>[ 9.819030] [c4] fts_touch 4-0049: fts_start_device already power on
- <3>[ 9.819040] [c4] fts_touch 4-0049: FTS cmd after wakeup : h0
- <3>[ 9.819165] [c4] sec_touchkey_driver 7-0020: Touch key already enabled
- <7>[ 9.819205] [c4] epen:pass pwr on
- <6>[ 9.819308] [c4] PWR key is pressed
- <6>[ 9.850949] [c4] EXT4-fs (mmcblk0p21): recovery complete
- <6>[ 9.851467] [c4] EXT4-fs (mmcblk0p21): mounted filesystem with writeback data mode. Opts:
- <7>[ 9.851487] [c4] SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
- <6>[ 9.874212] [c7] EXT4-fs (mmcblk0p21): mounted filesystem with writeback data mode. Opts:
- <7>[ 9.874235] [c7] SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
- <6>[ 9.900021] [c7] EXT4-fs (mmcblk0p19): recovery complete
- <6>[ 9.900619] [c7] EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts:
- <7>[ 9.900640] [c7] SELinux: initialized (dev mmcblk0p19, type ext4), uses xattr
- <6>[ 9.901025] [c7] SELinux: Context u:object_r:recovery_cache_file:s0 is not valid (left unmapped).
- <6>[ 9.910877] [c7] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts:
- <7>[ 9.910901] [c7] SELinux: initialized (dev mmcblk0p18, type ext4), uses xattr
- <6>[ 9.914891] [c7] SELinux: Context u:object_r:heapdump_data_file:s0 is not valid (left unmapped).
- <6>[ 9.916519] [c7] SELinux: Context u:object_r:vcs_data_file:s0 is not valid (left unmapped).
- <6>[ 9.921240] [c7] SELinux: Context u:object_r:gatekeeper_data_file:s0 is not valid (left unmapped).
- <6>[ 9.925631] [c7] SELinux: Context u:object_r:perfprofd_data_file:s0 is not valid (left unmapped).
- <6>[ 9.925942] [c7] SELinux: Context u:object_r:vold_data_file:s0 is not valid (left unmapped).
- <6>[ 9.926705] [c7] SELinux: Context u:object_r:bootchart_data_file:s0 is not valid (left unmapped).
- <4>[ 10.316910] [c4] keys:flip_cover_work #1 : 1
- <6>[ 11.179870] [c7] lcd panel: caps: 1, temperature: 0, elvss: 13, 12129c
- <6>[ 11.179954] [c7] lcd panel: brightness=127, bl=52, candela=172
- <6>[ 11.191038] [c7] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts:
- <7>[ 11.191061] [c7] SELinux: initialized (dev mmcblk0p18, type ext4), uses xattr
- <6>[ 11.283011] [c7] lcd panel: caps: 0, temperature: 0, elvss: 0, 12168c
- <6>[ 11.283108] [c7] lcd panel: vint: 18
- <6>[ 11.283312] [c7] lcd panel: brightness=0, bl=0, candela=2
- <6>[ 11.283676] [c7] s5p-decon-display 13800000.decon_fb: +s3c_fb_blank: 4
- <6>[ 11.283723] [c7] s5p-decon-display 13800000.decon_fb: pcd_detection_disable: pcd_detected 0, pcd gpio 1
- <4>[ 11.283732] [c7] s5p-decon-display 13800000.decon_fb: pm_relax
- <6>[ 11.283848] s5p-decon-display 13800000.decon_fb: +s5p_mipi_dsi_disable
- <6>[ 11.283860] [c7] lcd panel: + s6e3ha2_power_off
- <6>[ 11.283871] [c7] s5p-decon-display 13800000.decon_fb: esd_fg_enable: disable, gpio: 0, state: 0
- <6>[ 11.283922] [c7] lcd panel: + s6e3ha2_ldi_disable
- <6>[ 11.284002] [c7] lcd panel: DISPLAY_OFF
- <6>[ 11.407103] [c7] lcd panel: - s6e3ha2_ldi_disable
- <6>[ 11.407112] [c7] lcd panel: - s6e3ha2_power_off
- <6>[ 11.415402] [c7] s5p-decon-display 13800000.decon_fb: -s5p_mipi_dsi_disable
- <6>[ 11.415635] [c7] s5p-decon-display 13800000.decon_fb: -s3c_fb_blank: 4, 0
- <6>[ 11.415647] [c7] mdnie mdnie: fb_notifier_callback: 4
- <6>[ 11.415653] [c7] LCD is off
- <6>[ 12.354725] [c0] fts_touch 4-0049: [P] tID:0 x:1061 y:1386 w:1 h:11 z:16 s:39 p:0 tc:1 tm:0
- <6>[ 12.355119] [c7] s5p-decon-display 13800000.decon_fb: +s3c_fb_blank: 0
- <6>[ 12.355704] [c7] s5p-decon-display 13800000.decon_fb: +s5p_mipi_dsi_enable
- <6>[ 12.394572] [c7] lcd panel: + s6e3ha2_power_on
- <6>[ 12.394667] [c0] lcd panel: oled_det_isr: oled_det(1) is detected
- <6>[ 12.502476] [c0] fts_touch 4-0049: [R] tID:0 mc: 12 tc:0 lx: 810 ly: 1883 Ver[022C8200]
- <6>[ 12.527266] [c4] s5p-decon-display 13800000.decon_fb: rx fifo : 1600031c, response : 1c, rx_size : 3
- <3>[ 12.527719] [c4] s5p-decon-display 13800000.decon_fb: DSI protocol violation!
- <3>[ 12.532016] [c4] lcd panel: mipi_read failed retry ret = -1 ..
- <6>[ 12.532114] [c4] lcd panel: DISPLAY_ON
- <6>[ 12.532284] [c4] lcd panel: caps: 0, temperature: 0, elvss: 0, 12168c
- <6>[ 12.532325] [c4] lcd panel: vint: 18
- <6>[ 12.532459] [c4] lcd panel: acl: 0, auto_brightness: 0
- <6>[ 12.532500] [c4] lcd panel: temperature: 25, tset: 25
- <6>[ 12.532539] [c4] lcd panel: hbm: 0, auto_brightness: 0
- <6>[ 12.532578] [c4] lcd panel: brightness=0, bl=0, candela=2
- <6>[ 12.532590] [c4] s5p-decon-display 13800000.decon_fb: esd_fg_enable: enable, gpio: 0, state: 0
- <6>[ 12.532600] [c4] lcd panel: - s6e3ha2_power_on
- <6>[ 12.532607] [c4] s5p-decon-display 13800000.decon_fb: -s5p_mipi_dsi_enable
- <4>[ 12.532617] [c4] s5p-decon-display 13800000.decon_fb: pm_stay_awake
- <6>[ 12.532757] s5p-decon-display 13800000.decon_fb: pcd_detection_enable: pcd_detected 0, pcd gpio 1
- <6>[ 12.532766] [c4] s5p-decon-display 13800000.decon_fb: -s3c_fb_blank: 0, 0
- <6>[ 12.532777] [c4] mdnie mdnie: fb_notifier_callback: 0
- <6>[ 12.562602] [c4] mdnie mdnie: STANDARD_UI
- <6>[ 12.562611] [c4] LCD is on
- <6>[ 12.578930] [c4] lcd panel: caps: 1, temperature: 0, elvss: 13, 12129c
- <6>[ 12.579070] [c4] lcd panel: vint: 21
- <6>[ 12.579444] [c4] lcd panel: brightness=127, bl=52, candela=172
- <6>[ 13.324782] [c0] fts_touch 4-0049: [P] tID:0 x:269 y:2102 w:1 h:9 z:15 s:39 p:0 tc:1 tm:0
- <6>[ 13.815650] [c0] fts_touch 4-0049: [R] tID:0 mc: 42 tc:0 lx: 1365 ly: 2179 Ver[022C8200]
- <6>[ 14.376457] [c0] fts_touch 4-0049: [P] tID:0 x:378 y:2042 w:1 h:3 z:6 s:39 p:0 tc:1 tm:0
- <6>[ 14.459987] [c0] fts_touch 4-0049: [R] tID:0 mc: 6 tc:0 lx: 374 ly: 2038 Ver[022C8200]
- <6>[ 15.404667] [c0] fts_touch 4-0049: [P] tID:0 x:447 y:679 w:1 h:5 z:7 s:39 p:0 tc:1 tm:0
- <6>[ 15.499485] [c0] fts_touch 4-0049: [R] tID:0 mc: 7 tc:0 lx: 455 ly: 682 Ver[022C8200]
- <6>[ 16.420846] [c0] fts_touch 4-0049: [P] tID:0 x:90 y:690 w:1 h:3 z:7 s:39 p:0 tc:1 tm:0
- <6>[ 16.511855] [c0] fts_touch 4-0049: [R] tID:0 mc: 7 tc:0 lx: 99 ly: 690 Ver[022C8200]
- <6>[ 17.436990] [c5] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: failed
- <6>[ 17.793443] [c0] fts_touch 4-0049: [P] tID:0 x:111 y:677 w:1 h:4 z:7 s:39 p:0 tc:1 tm:0
- <6>[ 17.900394] [c0] fts_touch 4-0049: [R] tID:0 mc: 8 tc:0 lx: 115 ly: 679 Ver[022C8200]
- <6>[ 18.821292] [c0] fts_touch 4-0049: [P] tID:0 x:200 y:2230 w:1 h:7 z:10 s:39 p:0 tc:1 tm:0
- <6>[ 19.551688] [c0] fts_touch 4-0049: [R] tID:0 mc: 63 tc:0 lx: 1428 ly: 2232 Ver[022C8200]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement