API tools faq
paste
Guest User

Untitled

a guest
Nov 13th, 2025
40
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.90 KB | None | 0 0
raw download clone embed print report
  1. <6>[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. <5>[ 0.000000] Linux version 6.6.110 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28959-29397011cc) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Sun Oct 19 16:37:45 2025
  3. <6>[ 0.000000] Machine model: Routerich AX3000
  4. <6>[ 0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
  5. <6>[ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000
  6. <6>[ 0.000000] OF: reserved mem: 0x0000000047c80000..0x0000000047d7ffff (1024 KiB) nomap non-reusable wmcpu-reserved@47c80000
  7. <6>[ 0.000000] OF: reserved mem: 0x0000000047d80000..0x0000000047dbffff (256 KiB) nomap non-reusable wo-emi@47d80000
  8. <6>[ 0.000000] OF: reserved mem: 0x0000000047dc0000..0x0000000047ffffff (2304 KiB) nomap non-reusable wo-data@47dc0000
  9. <6>[ 0.000000] Zone ranges:
  10. <6>[ 0.000000] DMA [mem 0x0000000040000000-0x000000004fffffff]
  11. <6>[ 0.000000] DMA32 empty
  12. <6>[ 0.000000] Normal empty
  13. <6>[ 0.000000] Movable zone start for each node
  14. <6>[ 0.000000] Early memory node ranges
  15. <6>[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
  16. <6>[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff]
  17. <6>[ 0.000000] node 0: [mem 0x0000000043030000-0x0000000047c7ffff]
  18. <6>[ 0.000000] node 0: [mem 0x0000000047c80000-0x0000000047ffffff]
  19. <6>[ 0.000000] node 0: [mem 0x0000000048000000-0x000000004fffffff]
  20. <6>[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000004fffffff]
  21. <6>[ 0.000000] psci: probing for conduit method from DT.
  22. <6>[ 0.000000] psci: PSCIv1.1 detected in firmware.
  23. <6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
  24. <6>[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  25. <6>[ 0.000000] psci: SMC Calling Convention v1.4
  26. <6>[ 0.000000] percpu: Embedded 18 pages/cpu s35624 r8192 d29912 u73728
  27. <7>[ 0.000000] pcpu-alloc: s35624 r8192 d29912 u73728 alloc=18*4096
  28. <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
  29. <6>[ 0.000000] Detected VIPT I-cache on CPU0
  30. <6>[ 0.000000] CPU features: detected: GIC system register CPU interface
  31. <6>[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
  32. <6>[ 0.000000] alternatives: applying boot alternatives
  33. <5>[ 0.000000] Kernel command line:
  34. <6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  35. <6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  36. <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64512
  37. <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  38. <6>[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
  39. <6>[ 0.000000] software IO TLB: area num 2.
  40. <6>[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 0MB
  41. <6>[ 0.000000] software IO TLB: mapped [mem 0x000000004fe46000-0x000000004fec6000] (0MB)
  42. <6>[ 0.000000] Memory: 239816K/262144K available (9088K kernel code, 1000K rwdata, 1676K rodata, 448K init, 307K bss, 22328K reserved, 0K cma-reserved)
  43. <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  44. <6>[ 0.000000] rcu: Hierarchical RCU implementation.
  45. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  46. <6>[ 0.000000] Tracing variant of Tasks RCU enabled.
  47. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  48. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  49. <6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  50. <6>[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  51. <6>[ 0.000000] GICv3: 640 SPIs implemented
  52. <6>[ 0.000000] GICv3: 0 Extended SPIs implemented
  53. <6>[ 0.000000] Root IRQ handler: 0xffffffc080010080
  54. <6>[ 0.000000] GICv3: GICv3 features: 16 PPIs
  55. <6>[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
  56. <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  57. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
  58. <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
  59. <6>[ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
  60. <6>[ 0.000083] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
  61. <6>[ 0.000091] pid_max: default: 32768 minimum: 301
  62. <6>[ 0.002957] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
  63. <6>[ 0.002965] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
  64. <4>[ 0.005123] cacheinfo: Unable to detect cache hierarchy for CPU 0
  65. <6>[ 0.005662] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
  66. <6>[ 0.005801] rcu: Hierarchical SRCU implementation.
  67. <6>[ 0.005804] rcu: Max phase no-delay instances is 1000.
  68. <6>[ 0.006218] smp: Bringing up secondary CPUs ...
  69. <6>[ 0.006590] Detected VIPT I-cache on CPU1
  70. <6>[ 0.006632] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
  71. <6>[ 0.006660] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  72. <6>[ 0.006730] smp: Brought up 1 node, 2 CPUs
  73. <6>[ 0.006735] SMP: Total of 2 processors activated.
  74. <6>[ 0.006739] CPU features: detected: 32-bit EL0 Support
  75. <6>[ 0.006742] CPU features: detected: CRC32 instructions
  76. <6>[ 0.006775] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  77. <6>[ 0.006778] CPU: All CPU(s) started at EL2
  78. <6>[ 0.006780] alternatives: applying system-wide alternatives
  79. <6>[ 0.010373] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  80. <6>[ 0.010390] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  81. <6>[ 0.011661] pinctrl core: initialized pinctrl subsystem
  82. <6>[ 0.012787] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  83. <6>[ 0.013132] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  84. <6>[ 0.013161] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  85. <6>[ 0.013181] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  86. <6>[ 0.013566] thermal_sys: Registered thermal governor 'fair_share'
  87. <6>[ 0.013570] thermal_sys: Registered thermal governor 'bang_bang'
  88. <6>[ 0.013573] thermal_sys: Registered thermal governor 'step_wise'
  89. <6>[ 0.013575] thermal_sys: Registered thermal governor 'user_space'
  90. <6>[ 0.013616] ASID allocator initialised with 65536 entries
  91. <6>[ 0.014525] pstore: Using crash dump compression: deflate
  92. <6>[ 0.014530] pstore: Registered ramoops as persistent store backend
  93. <6>[ 0.014532] ramoops: using 0x10000@0x42ff0000, ecc: 0
  94. <6>[ 0.016016] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
  95. <6>[ 0.021781] Modules: 29600 pages in range for non-PLT usage
  96. <6>[ 0.021789] Modules: 521120 pages in range for PLT usage
  97. <6>[ 0.022766] cryptd: max_cpu_qlen set to 1000
  98. <5>[ 0.023851] SCSI subsystem initialized
  99. <7>[ 0.024062] libata version 3.00 loaded.
  100. <6>[ 0.025701] clocksource: Switched to clocksource arch_sys_counter
  101. <6>[ 0.027961] NET: Registered PF_INET protocol family
  102. <6>[ 0.028060] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
  103. <6>[ 0.029320] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
  104. <6>[ 0.029333] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  105. <6>[ 0.029342] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
  106. <6>[ 0.029360] TCP bind hash table entries: 2048 (order: 4, 65536 bytes, linear)
  107. <6>[ 0.029411] TCP: Hash tables configured (established 2048 bind 2048)
  108. <6>[ 0.029718] MPTCP token hash table entries: 256 (order: 0, 6144 bytes, linear)
  109. <6>[ 0.029818] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  110. <6>[ 0.029834] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  111. <6>[ 0.030119] NET: Registered PF_UNIX/PF_LOCAL protocol family
  112. <6>[ 0.030155] PCI: CLS 0 bytes, default 64
  113. <6>[ 0.031343] workingset: timestamp_bits=46 max_order=16 bucket_order=0
  114. <6>[ 0.036156] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  115. <6>[ 0.036165] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  116. <6>[ 0.093849] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  117. <6>[ 0.105071] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  118. <6>[ 0.108716] printk: console [ttyS0] disabled
  119. <6>[ 0.129098] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 72, base_baud = 2500000) is a ST16650V2
  120. <6>[ 0.129139] printk: console [ttyS0] enabled
  121. <6>[ 0.892065] loop: module loaded
  122. <6>[ 0.898234] spi-nand spi0.0: calibration result: 0x3
  123. <6>[ 0.903301] spi-nand spi0.0: Winbond SPI NAND was found.
  124. <6>[ 0.908642] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
  125. <6>[ 0.917089] Signature found at block 1023 [0x07fe0000]
  126. <6>[ 0.922218] NMBM management region starts at block 960 [0x07800000]
  127. <6>[ 0.929297] First info table with writecount 0 found in block 960
  128. <6>[ 0.937812] Second info table with writecount 0 found in block 963
  129. <6>[ 0.943998] NMBM has been successfully attached
  130. <5>[ 0.948886] 6 fixed-partitions partitions found on MTD device spi0.0
  131. <5>[ 0.955244] Creating 6 MTD partitions on "spi0.0":
  132. <5>[ 0.960051] 0x000000000000-0x000008000000 : "spi0.0"
  133. <4>[ 0.965003] mtd: partition "spi0.0" extends beyond the end of device "spi0.0" -- size truncated to 0x7800000
  134. <5>[ 1.033003] 0x000000000000-0x000000100000 : "BL2"
  135. <5>[ 1.038227] 0x000000180000-0x000000380000 : "Factory"
  136. <5>[ 1.043968] 0x000000380000-0x000000580000 : "FIP"
  137. <5>[ 1.049105] 0x000000100000-0x000000180000 : "u-boot-env"
  138. <5>[ 1.054804] 0x000000580000-0x000007580000 : "ubi"
  139. <6>[ 1.204081] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081700000, irq 75
  140. <6>[ 1.213822] i2c_dev: i2c /dev entries driver
  141. <6>[ 1.219941] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
  142. <6>[ 1.229193] NET: Registered PF_INET6 protocol family
  143. <6>[ 1.235127] Segment Routing with IPv6
  144. <6>[ 1.238856] In-situ OAM (IOAM) with IPv6
  145. <6>[ 1.242814] NET: Registered PF_PACKET protocol family
  146. <6>[ 1.247924] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  147. <6>[ 1.261240] 8021q: 802.1Q VLAN Support v1.8
  148. <6>[ 1.288971] phy phy-soc:[email protected]: type_sw - reg 0x218, index 0
  149. <6>[ 1.366798] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode
  150. <6>[ 1.375527] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
  151. <6>[ 1.386558] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=79)
  152. <6>[ 1.409085] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=80)
  153. <6>[ 1.431159] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=81)
  154. <6>[ 1.453502] mt7530-mdio mdio-bus:1f wan (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=82)
  155. <6>[ 1.464732] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
  156. <6>[ 1.471490] DSA: tree 0 setup
  157. <5>[ 1.475130] UBI: auto-attach mtd5
  158. <5>[ 1.478488] ubi0: default fastmap pool size: 40
  159. <5>[ 1.483008] ubi0: default fastmap WL pool size: 20
  160. <5>[ 1.487805] ubi0: attaching mtd5
  161. <5>[ 1.807335] ubi0: scanning is finished
  162. <5>[ 1.816376] ubi0: attached mtd5 (name "ubi", size 112 MiB)
  163. <5>[ 1.821867] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  164. <5>[ 1.828746] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  165. <5>[ 1.835522] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  166. <5>[ 1.842473] ubi0: good PEBs: 896, bad PEBs: 0, corrupted PEBs: 0
  167. <5>[ 1.848474] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
  168. <5>[ 1.855682] ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1717734580
  169. <5>[ 1.864802] ubi0: available PEBs: 0, total reserved PEBs: 896, PEBs reserved for bad PEB handling: 19
  170. <5>[ 1.874021] ubi0: background thread "ubi_bgt0d" started, PID 609
  171. <6>[ 1.874726] block ubiblock0_1: created from ubi0:1(rootfs)
  172. <5>[ 1.885519] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
  173. <6>[ 1.892597] clk: Disabling unused clocks
  174. <6>[ 1.901001] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  175. <6>[ 1.908301] Freeing unused kernel memory: 448K
  176. <6>[ 1.912836] Run /sbin/init as init process
  177. <7>[ 1.916947] with arguments:
  178. <7>[ 1.919903] /sbin/init
  179. <7>[ 1.922597] with environment:
  180. <7>[ 1.925748] HOME=/
  181. <7>[ 1.928096] TERM=linux
  182. <14>[ 2.117040] init: Console is alive
  183. <14>[ 2.120561] init: - watchdog -
  184. <14>[ 2.906876] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  185. <6>[ 2.948114] usbcore: registered new interface driver usbfs
  186. <6>[ 2.953651] usbcore: registered new interface driver hub
  187. <6>[ 2.959044] usbcore: registered new device driver usb
  188. <4>[ 2.969961] gpio_button_hotplug: loading out-of-tree module taints kernel.
  189. <4>[ 2.982036] xhci-mtk 11200000.usb: supply vbus not found, using dummy regulator
  190. <6>[ 2.990344] xhci-mtk 11200000.usb: xHCI Host Controller
  191. <6>[ 2.995585] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
  192. <6>[ 3.003080] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
  193. <6>[ 3.012246] xhci-mtk 11200000.usb: irq 83, io mem 0x11200000
  194. <6>[ 3.017992] xhci-mtk 11200000.usb: xHCI Host Controller
  195. <6>[ 3.023212] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
  196. <6>[ 3.030606] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
  197. <6>[ 3.038185] hub 1-0:1.0: USB hub found
  198. <6>[ 3.041985] hub 1-0:1.0: 1 port detected
  199. <6>[ 3.046361] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  200. <6>[ 3.054860] hub 2-0:1.0: USB hub found
  201. <6>[ 3.058694] hub 2-0:1.0: 1 port detected
  202. <6>[ 3.069811] usbcore: registered new interface driver usb-storage
  203. <6>[ 3.076919] usbcore: registered new interface driver uas
  204. <14>[ 3.082473] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  205. <14>[ 3.100014] init: - preinit -
  206. <5>[ 3.245732] random: crng init done
  207. <6>[ 3.467245] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
  208. <6>[ 3.475706] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
  209. <6>[ 3.505156] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
  210. <14>[ 7.723603] mount_root: loading kmods from internal overlay
  211. <14>[ 7.745103] kmodloader: loading kernel modules from //etc/modules-boot.d/*
  212. <14>[ 7.755206] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
  213. <14>[ 7.880677] block: attempting to load /tmp/overlay/upper/etc/config/fstab
  214. <11>[ 7.888875] block: unable to load configuration (fstab: Entry not found)
  215. <14>[ 7.895643] block: attempting to load /tmp/overlay/etc/config/fstab
  216. <11>[ 7.902071] block: unable to load configuration (fstab: Entry not found)
  217. <14>[ 7.908943] block: attempting to load /etc/config/fstab
  218. <11>[ 7.917182] block: unable to load configuration (fstab: Entry not found)
  219. <11>[ 7.923954] block: no usable configuration
  220. <5>[ 7.930676] UBIFS (ubi0:2): Mounting in unauthenticated mode
  221. <5>[ 7.936443] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 793
  222. <5>[ 7.957760] UBIFS (ubi0:2): recovery needed
  223. <5>[ 8.026418] UBIFS (ubi0:2): recovery completed
  224. <5>[ 8.030931] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
  225. <5>[ 8.038766] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  226. <5>[ 8.048670] UBIFS (ubi0:2): FS size: 80502784 bytes (76 MiB, 634 LEBs), max 645 LEBs, journal size 4063232 bytes (3 MiB, 32 LEBs)
  227. <5>[ 8.060314] UBIFS (ubi0:2): reserved for root: 3802345 bytes (3713 KiB)
  228. <5>[ 8.066920] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID C2F94EEF-FB4E-4ABE-B64F-F560AD4A94B7, small LPT model
  229. <14>[ 8.079540] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
  230. <14>[ 8.090971] block: extroot: not configured
  231. <5>[ 8.095200] UBIFS (ubi0:2): un-mount UBI device 0
  232. <5>[ 8.099932] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
  233. <5>[ 8.109177] UBIFS (ubi0:2): Mounting in unauthenticated mode
  234. <5>[ 8.114944] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 796
  235. <5>[ 8.162755] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
  236. <5>[ 8.170604] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  237. <5>[ 8.180516] UBIFS (ubi0:2): FS size: 80502784 bytes (76 MiB, 634 LEBs), max 645 LEBs, journal size 4063232 bytes (3 MiB, 32 LEBs)
  238. <5>[ 8.192166] UBIFS (ubi0:2): reserved for root: 3802345 bytes (3713 KiB)
  239. <5>[ 8.198772] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID C2F94EEF-FB4E-4ABE-B64F-F560AD4A94B7, small LPT model
  240. <14>[ 8.213467] mount_root: loading kmods from internal overlay
  241. <14>[ 8.234051] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
  242. <14>[ 8.243625] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
  243. <14>[ 8.297038] block: attempting to load /tmp/overlay/upper/etc/config/fstab
  244. <14>[ 8.306489] block: extroot: not configured
  245. <14>[ 8.312408] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
  246. <14>[ 8.319676] block: extroot: not configured
  247. <14>[ 8.325469] mount_root: switching to ubifs overlay
  248. <4>[ 8.338224] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
  249. <15>[ 8.352215] urandom-seed: Seeding with /etc/urandom.seed
  250. <14>[ 8.395274] procd: - early -
  251. <14>[ 8.398364] procd: - watchdog -
  252. <14>[ 8.949827] procd: - watchdog -
  253. <14>[ 8.956249] procd: - ubus -
  254. <14>[ 9.115874] procd: - init -
  255. <14>[ 9.731316] kmodloader: loading kernel modules from /etc/modules.d/*
  256. <6>[ 9.775213] NET: Registered PF_ALG protocol family
  257. <6>[ 9.790877] tun: Universal TUN/TAP device driver, 1.6
  258. <6>[ 9.802060] l2tp_core: L2TP core driver, V2.0
  259. <14>[ 9.804535] urngd: v1.0.2 started.
  260. <6>[ 9.810003] l2tp_netlink: L2TP netlink interface
  261. <6>[ 9.816378] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  262. <6>[ 9.824528] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  263. <6>[ 9.832044] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  264. <6>[ 9.838567] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  265. <6>[ 9.846174] gre: GRE over IPv4 demultiplexor driver
  266. <6>[ 9.851973] ip_gre: GRE over IPv4 tunneling driver
  267. <6>[ 9.993710] ppdev: user-space parallel port driver
  268. <6>[ 10.113489] lp: driver loaded but no devices found
  269. <6>[ 10.126870] GACT probability on
  270. <6>[ 10.130944] Mirror/redirect action on
  271. <6>[ 10.140710] u32 classifier
  272. <6>[ 10.143428] input device check on
  273. <6>[ 10.147129] Actions configured
  274. <6>[ 10.161085] ntfs3: Enabled Linux POSIX ACLs support
  275. <6>[ 10.168875] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
  276. <5>[ 10.210720] Bridge firewalling registered
  277. <6>[ 10.216785] usbcore: registered new interface driver cdc_acm
  278. <6>[ 10.222444] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  279. <6>[ 10.232132] usbcore: registered new interface driver cdc_wdm
  280. <6>[ 10.240028] Loading modules backported from Linux version v6.12.52-0-g2b2cbdcede38
  281. <6>[ 10.247631] Backport generated by backports.git v6.1.110-1-35-g410656ef
  282. <6>[ 10.373828] usbcore: registered new interface driver ums-alauda
  283. <6>[ 10.381548] usbcore: registered new interface driver ums-cypress
  284. <6>[ 10.389126] usbcore: registered new interface driver ums-datafab
  285. <6>[ 10.396568] usbcore: registered new interface driver ums-freecom
  286. <6>[ 10.404105] usbcore: registered new interface driver ums-isd200
  287. <6>[ 10.411927] usbcore: registered new interface driver ums-jumpshot
  288. <6>[ 10.420619] usbcore: registered new interface driver ums-karma
  289. <6>[ 10.429159] usbcore: registered new interface driver ums-sddr09
  290. <6>[ 10.436666] usbcore: registered new interface driver ums-sddr55
  291. <6>[ 10.444168] usbcore: registered new interface driver ums-usbat
  292. <6>[ 10.452002] usbcore: registered new interface driver usblp
  293. <6>[ 10.464301] usbcore: registered new interface driver usbserial_generic
  294. <6>[ 10.470928] usbserial: USB Serial support registered for generic
  295. <6>[ 10.488875] xt_time: kernel timezone is -0000
  296. <6>[ 10.494999] usbcore: registered new interface driver cdc_ether
  297. <6>[ 10.503228] usbcore: registered new interface driver cdc_ncm
  298. <6>[ 10.525326] usbcore: registered new interface driver huawei_cdc_ncm
  299. <6>[ 10.858191] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20240823161240a
  300. <6>[ 10.858191]
  301. <6>[ 11.064284] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20240823161304
  302. <6>[ 11.167058] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20240823161841
  303. <6>[ 11.265890] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0'
  304. <6>[ 11.367481] mt798x-wmac 18000000.wifi: registered 001E91
  305. <6>[ 11.372947] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1'
  306. <6>[ 11.452396] PPP generic driver version 2.4.2
  307. <6>[ 11.457945] PPP MPPE Compression module registered
  308. <6>[ 11.463792] NET: Registered PF_PPPOX protocol family
  309. <6>[ 11.469890] PPTP driver version 0.8.5
  310. <6>[ 11.475687] usbcore: registered new interface driver qmi_wwan
  311. <6>[ 11.483341] usbcore: registered new interface driver rndis_host
  312. <6>[ 11.495226] usbcore: registered new interface driver cdc_mbim
  313. <6>[ 11.503145] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  314. <6>[ 11.509158] usbcore: registered new interface driver option
  315. <6>[ 11.514796] usbserial: USB Serial support registered for GSM modem (1-port)
  316. <6>[ 11.524991] usbcore: registered new interface driver qcserial
  317. <6>[ 11.530841] usbserial: USB Serial support registered for Qualcomm USB modem
  318. <14>[ 11.538487] kmodloader: done loading kernel modules from /etc/modules.d/*
  319. <4>[ 12.989569] bridger[1959]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
  320. <4>[ 14.351259] mtdblock: MTD device 'Factory' is NAND, please consider using UBI block devices instead.
  321. <4>[ 14.589799] mtdblock: MTD device 'Factory' is NAND, please consider using UBI block devices instead.
  322. <6>[ 17.883406] mtk_soc_eth 15100000.ethernet eth0: Link is Down
  323. <6>[ 17.915504] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
  324. <6>[ 17.945463] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
  325. <6>[ 17.949107] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
  326. <6>[ 17.966786] br-lan: port 1(lan1) entered blocking state
  327. <6>[ 17.972020] br-lan: port 1(lan1) entered disabled state
  328. <6>[ 17.977312] mt7530-mdio mdio-bus:1f lan1: entered allmulticast mode
  329. <6>[ 17.983577] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode
  330. <6>[ 17.994207] mt7530-mdio mdio-bus:1f lan1: entered promiscuous mode
  331. <6>[ 18.026644] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
  332. <6>[ 18.039805] br-lan: port 2(lan2) entered blocking state
  333. <6>[ 18.045040] br-lan: port 2(lan2) entered disabled state
  334. <6>[ 18.050360] mt7530-mdio mdio-bus:1f lan2: entered allmulticast mode
  335. <6>[ 18.058714] mt7530-mdio mdio-bus:1f lan2: entered promiscuous mode
  336. <6>[ 18.094158] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
  337. <6>[ 18.116039] br-lan: port 3(lan3) entered blocking state
  338. <6>[ 18.121284] br-lan: port 3(lan3) entered disabled state
  339. <6>[ 18.126609] mt7530-mdio mdio-bus:1f lan3: entered allmulticast mode
  340. <6>[ 18.135460] mt7530-mdio mdio-bus:1f lan3: entered promiscuous mode
  341. <6>[ 18.157532] mt7530-mdio mdio-bus:1f wan: configuring for phy/gmii link mode
  342. <6>[ 18.384911] amneziawg: AmneziaWG 1.0.20220627 loaded. See amnezia.org for information.
  343. <6>[ 18.392890] amneziawg: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
  344. <6>[ 18.402500] amneziawg: Copyright (C) 2024-2025 AmneziaVPN <[email protected]>. All Rights Reserved.
  345. <6>[ 19.567264] mt7530-mdio mdio-bus:1f lan2: Link is Up - 100Mbps/Full - flow control rx/tx
  346. <6>[ 19.575197] br-lan: port 2(lan2) entered blocking state
  347. <6>[ 19.580605] br-lan: port 2(lan2) entered forwarding state
  348. <6>[ 19.752862] mt7530-mdio mdio-bus:1f wan: Link is Up - 100Mbps/Full - flow control off
  349. <6>[ 20.859691] mt7530-mdio mdio-bus:1f lan3: Link is Up - 1Gbps/Full - flow control rx/tx
  350. <6>[ 20.862099] br-lan: port 3(lan3) entered blocking state
  351. <6>[ 20.872852] br-lan: port 3(lan3) entered forwarding state
  352. <6>[ 21.636503] br-lan: port 4(phy0-ap0) entered blocking state
  353. <6>[ 21.642255] br-lan: port 4(phy0-ap0) entered disabled state
  354. <6>[ 21.648394] mt798x-wmac 18000000.wifi phy0-ap0: entered allmulticast mode
  355. <6>[ 21.655790] mt798x-wmac 18000000.wifi phy0-ap0: entered promiscuous mode
  356. <6>[ 21.662692] br-lan: port 4(phy0-ap0) entered blocking state
  357. <6>[ 21.668308] br-lan: port 4(phy0-ap0) entered forwarding state
  358. <6>[ 21.836803] mt798x-wmac 18000000.wifi phy0-ap0: left allmulticast mode
  359. <6>[ 21.843360] mt798x-wmac 18000000.wifi phy0-ap0: left promiscuous mode
  360. <6>[ 21.849980] br-lan: port 4(phy0-ap0) entered disabled state
  361. <6>[ 21.894183] br-lan: port 4(phy0-ap0) entered blocking state
  362. <6>[ 21.899802] br-lan: port 4(phy0-ap0) entered disabled state
  363. <6>[ 21.905408] mt798x-wmac 18000000.wifi phy0-ap0: entered allmulticast mode
  364. <6>[ 21.912411] mt798x-wmac 18000000.wifi phy0-ap0: entered promiscuous mode
  365. <6>[ 21.919344] br-lan: port 4(phy0-ap0) entered blocking state
  366. <6>[ 21.924910] br-lan: port 4(phy0-ap0) entered forwarding state
  367. <6>[ 22.278183] br-lan: port 5(phy1-ap0) entered blocking state
  368. <6>[ 22.283774] br-lan: port 5(phy1-ap0) entered disabled state
  369. <6>[ 22.289477] mt798x-wmac 18000000.wifi phy1-ap0: entered allmulticast mode
  370. <6>[ 22.296590] mt798x-wmac 18000000.wifi phy1-ap0: entered promiscuous mode
  371. <6>[ 22.303548] br-lan: port 5(phy1-ap0) entered blocking state
  372. <6>[ 22.309173] br-lan: port 5(phy1-ap0) entered forwarding state
  373. <6>[ 22.886655] br-lan: port 5(phy1-ap0) entered disabled state
  374. <6>[ 23.157967] br-lan: port 5(phy1-ap0) entered blocking state
  375. <6>[ 23.163562] br-lan: port 5(phy1-ap0) entered forwarding state
  376.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!