<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.4.0-twrp-klte-unified-1.7 (jc@gallifrey) (gcc version 4.9.4 20151028 (prerelease) (Linaro GCC 4.9-2016.02) ) #1 SMP PREEMPT Tue May 24 00:10:55 EDT 2016
<4>[    0.000000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: SAMSUNG K PROJECT REV14
<6>[    0.000000] Recovery Boot Mode
<6>[    0.000000] qcom,ion-heap@28 reserved EBI1 size 614000
<6>[    0.000000] qcom,ion-heap@30 reserved EBI1 size 9600000
<6>[    0.000000] qcom,mdss_fb_primary reserved EBI1 size 1f00000
<6>[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-4100000
<6>[    0.000000] Node qcom,wdt@f9017000 memblock_reserve memory 0-4000
<6>[    0.000000] qcom,msm-rtb reserved EBI1 size 100000
<6>[    0.000000] qcom,msm-contig-mem reserved EBI1 size 280000
<6>[    0.000000] Node qcom,msm-mem-hole removed memory 4d00000-d200000
<6>[    0.000000] Node qcom,msm-mem-hole removed memory fa00000-10200000
<6>[    0.000000] Initialized persistent memory from 7fa00000-7fafffff
<6>[    0.000000] memory pool 3 (start 0x73b00000 size bf00000) initialized
<6>[    0.000000] cma: CMA: reserved 16 MiB at 2a800000
<6>[    0.000000] cma: Found secure_region, memory base 0, size 165 MiB, limit 0xffffffff
<6>[    0.000000] cma: CMA: reserved 168 MiB at 69000000
<6>[    0.000000] cma: Found adsp_region, memory base 0, size 75 MiB, limit 0xffffffff
<6>[    0.000000] cma: CMA: reserved 76 MiB at 64400000
<6>[    0.000000] cma: Found qsecom_region, memory base 0, size 17 MiB, limit 0xffffffff
<6>[    0.000000] cma: CMA: reserved 20 MiB at 63000000
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<6>[    0.000000] IMEM DT static mapping successful
<7>[    0.000000] On node 0 totalpages: 439296
<7>[    0.000000] free_area_init_node: node 0, pgdat c0fcaec0, node_mem_map cd200000
<7>[    0.000000]   Normal zone: 1398 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 141450 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 2698 pages used for memmap
<7>[    0.000000]   HighMem zone: 293750 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @ce252000 s16000 r0 d12672 u32768
<7>[    0.000000] pcpu-alloc: s16000 r0 d12672 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 435200
<5>[    0.000000] Kernel command line: console=null androidboot.hardware=qcom androidboot.bootdevice=msm_sdcc.1 user_debug=31 msm_rtb.filter=0x3F androidboot.sec_atd.tty=/dev/ttyHSL0 sec_log=0x100000@0x10000008 sec_dbg=0x80000@0x10100008 sec_debug.reset_reason=0x0 mdss_mdp.panel=1:dsi:0:mdss_dsi_samsung_1080p_cmd_fa2 lcd_id=0x602813 Panelres=1 pmic_info=3 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 cordon=199301213f43f6b27a00a252bb55cb92 connie=SM-G900W8_OPEN_CAN_b73781c5234cca1ae44ec0d18f7954cf sysscope=0xee000000 loglevel=4 samsung.hardware=SM-G900W8 androidboot.revision=14 androidboot.emmc_checksum=3 androidboot.warranty_bit=1 fg_reset=0 androidboot.bootloader=G900W8VLS1DPF3 androidboot.nvdata_backup=0 androidboot.boot_recovery=1 uart_dbg=0 sec_debug.pmc8974_rev=2 vmalloc=450m level=0x574f4c44 androidboot.emmc=true androidboot.serialno=3d7d63d7 androidboot.baseband=msm
<0>[    0.000000] sec_dbg_setup: str=@0x10100008
<0>[    0.000000] sec_dbg_setup: secdbg_paddr = 0x10100008
<0>[    0.000000] sec_dbg_setup: secdbg_size = 0x80000
<6>[    0.000000] get_lcd_id_cmdline: LCD_ID = 0x602813, lcd_attached =1
<6>[    0.000000] lcd_panel_info k FHD LSI
<6>[    0.000000] /home/jc/build/nethunter-kernel/klte/drivers/extcon/extcon-max77804k.c get_if_pmic_inifo: switch_sel: 3 if_pmic_rev:0
<6>[    0.000000] sec_bat_get_fg_reset, fg_reset:0
<6>[    0.000000] get_lpm_mode:not lpm mode
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 77MB 40MB 1593MB 6MB = 1716MB total
<5>[    0.000000] Memory: 1412148k/1412148k available, 540620k reserved, 914432K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000] 	   vmalloc : 0xec000000 - 0xff000000   ( 304 MB)
<5>[    0.000000] 	    lowmem : 0xd0200000 - 0xebb00000   ( 441 MB)
<5>[    0.000000] 	   vmalloc : 0xcfa00000 - 0xd0200000   (   8 MB)
<5>[    0.000000] 	    lowmem : 0xcd200000 - 0xcfa00000   (  40 MB)
<5>[    0.000000] 	   vmalloc : 0xc4d00000 - 0xcd200000   ( 133 MB)
<5>[    0.000000] 	    lowmem : 0xc0000000 - 0xc4d00000   (  77 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc0d98274   (13889 kB)
<5>[    0.000000]       .init : 0xc0e00000 - 0xc0f0de80   (1080 kB)
<5>[    0.000000]       .data : 0xc0f0e000 - 0xc0fcfeac   ( 776 kB)
<5>[    0.000000]        .bss : 0xc0fcfed0 - 0xc166d49c   (6774 kB)
<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
<6>[    0.000000] Switching to timer-based delay loop
<6>[    0.000000] Console: colour dummy device 80x30
<6>[    0.000079] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
<6>[    0.000097] pid_max: default: 32768 minimum: 301
<6>[    0.000224] Security Framework initialized
<6>[    0.000237] SELinux:  Initializing.
<7>[    0.000285] SELinux:  Starting in permissive mode
<6>[    0.000336] Mount-cache hash table entries: 512
<6>[    0.001029] Initializing cgroup subsys cpuacct
<6>[    0.001040] Initializing cgroup subsys freezer
<6>[    0.001076] CPU: Testing write buffer coherency: ok
<6>[    0.001240] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.001298] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
<6>[    0.003828] Setting up static identity map for 0x998200 - 0x998288
<6>[    0.003841] MSM Memory Dump table set up
<3>[    0.003852] set_dload_mode <1> ( c0e0d468 )
<6>[    0.005181] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.005912] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<6>[    0.006631] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>[    0.006708] Brought up 4 CPUs
<6>[    0.006720] SMP: Total of 4 processors activated (153.60 BogoMIPS).
<6>[    0.018092] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 1
<4>[    0.018114] ------------[ cut here ]------------
<4>[    0.018125] WARNING: at /home/jc/build/nethunter-kernel/klte/fs/proc/generic.c:323 0xc028aeb8()
<4>[    0.018134] name 'cpu/vfp_bounce'
<4>[    0.018148] Function entered at [<c010b440>] from [<c01932e8>]
<4>[    0.018159] Function entered at [<c01932e8>] from [<c0193358>]
<4>[    0.018169] Function entered at [<c0193358>] from [<c028aeb8>]
<4>[    0.018180] Function entered at [<c028aeb8>] from [<c028af18>]
<4>[    0.018189] Function entered at [<c028af18>] from [<c028b1f4>]
<4>[    0.018198] Function entered at [<c028b1f4>] from [<c0e030bc>]
<4>[    0.018208] Function entered at [<c0e030bc>] from [<c0e00c08>]
<4>[    0.018217] Function entered at [<c0e00c08>] from [<c0e00dc0>]
<4>[    0.018226] Function entered at [<c0e00dc0>] from [<c01063f8>]
<4>[    0.018253] ---[ end trace da227214a82491b7 ]---
<3>[    0.018262] Failed to create procfs node for VFP bounce reporting
<6>[    0.018334] [suspend helper] suspend_helper_init: init done
<6>[    0.018614] dummy:
<6>[    0.030398] NET: Registered protocol family 16
<6>[    0.033529] DMA: preallocated 256 KiB pool for atomic coherent allocations
<0>[    0.035484] sec_debug_init: enable=0
<0>[    0.035494] sec_debug_init:__raw_readl restart_reason=2003195138
<0>[    0.035504] sec_debug_init: restart_reason : 0xfa00a65c
<6>[    0.035916] KPI: Bootloader start count = 29527
<6>[    0.035924] KPI: Bootloader end count = 88447
<6>[    0.035932] KPI: Bootloader display count = 66385
<6>[    0.035940] KPI: Bootloader load kernel count = 1896
<6>[    0.035948] KPI: Kernel MPM timestamp = 173024
<6>[    0.035956] KPI: Kernel MPM Clock frequency = 32768
<6>[    0.035971] socinfo_print: v8, id=194, ver=1.1, raw_id=1972, raw_ver=1, hw_plat=8, hw_plat_ver=65536
<6>[    0.035977]  accessory_chip=0, hw_plat_subtype=1, pmic_model=65542, pmic_die_revision=131073
<6>[    0.036632] persistent_ram: found existing buffer, size 32756, start 32756
<6>[    0.113797] console [ram-1] enabled
<6>[    0.127548] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
<6>[    0.142004] WDOG_V2 handled by TZ:dump @0xea504000 PA:2a504000
<6>[    0.142055] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
<6>[    0.164346] 8084_s1: 675 <--> 1050 mV at 0 mV normal idle
<6>[    0.164730] 8084_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
<6>[    0.165094] 8084_s1_so: 675 <--> 1050 mV at 675 mV normal idle
<6>[    0.165494] 8084_s2: 500 <--> 1050 mV at 0 mV normal idle
<6>[    0.165860] 8084_s2_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.166236] 8084_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.166598] 8084_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.167014] 8084_s3: 1300 mV normal idle
<6>[    0.167393] 8084_s4: 1800 mV normal idle
<6>[    0.167775] 8084_s5: 2150 mV normal idle
<6>[    0.168152] 8084_s6: 1050 mV normal idle
<6>[    0.168531] 8084_s7: 815 <--> 900 mV at 0 mV normal idle
<6>[    0.168898] 8084_s7_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.169255] 8084_s7_floor_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.169652] 8084_l1: 1225 mV normal idle
<6>[    0.170051] 8084_l2: 1200 mV normal idle
<6>[    0.170441] 8084_l3: 1050 <--> 1200 mV at 1200 mV normal idle
<6>[    0.170823] 8084_l4: 1200 <--> 1225 mV at 1225 mV normal idle
<6>[    0.171211] 8084_l5: 1800 mV normal idle
<6>[    0.171624] 8084_l6: 1800 mV normal idle
<6>[    0.172020] 8084_l7: 1800 mV normal idle
<6>[    0.172395] 8084_l8: 1800 mV normal idle
<6>[    0.172788] 8084_l9: 1800 <--> 2950 mV at 2950 mV normal idle
<6>[    0.173181] 8084_l10: 1800 <--> 2950 mV at 2950 mV normal idle
<6>[    0.173572] 8084_l11: 1300 mV normal idle
<6>[    0.173959] 8084_l12: 1800 mV normal idle
<6>[    0.174316] 8084_l12_ao: 1800 mV normal idle
<6>[    0.174712] 8084_l13: 1800 <--> 2950 mV at 2950 mV normal idle
<6>[    0.175099] 8084_l14: 1800 mV normal idle
<6>[    0.175496] 8084_l15: 2050 mV normal idle
<6>[    0.175877] 8084_l16: 2700 mV normal idle
<6>[    0.176291] 8084_l17: 2850 mV normal idle
<6>[    0.176686] 8084_l18: 2850 mV normal idle
<6>[    0.177081] 8084_l19: 2900 <--> 3300 mV at 2900 mV normal idle
<6>[    0.177478] 8084_l20: 2950 mV normal idle
<6>[    0.177889] 8084_l21: 2950 mV normal idle
<6>[    0.178290] 8084_l22: 3000 <--> 3300 mV at 3000 mV normal idle
<6>[    0.178671] 8084_l23: 3000 mV normal idle
<6>[    0.179055] 8084_l24: 3075 mV normal idle
<6>[    0.179438] 8084_l25: 2100 mV normal idle
<6>[    0.179824] 8084_l26: 1800 <--> 2050 mV at 2050 mV normal idle
<6>[    0.180200] 8084_l27: 1000 <--> 1225 mV at 1200 mV normal idle
<6>[    0.180594] 8084_lvs1:
<6>[    0.180921] 8084_lvs2:
<6>[    0.181266] 8084_lvs3:
<6>[    0.181634] 8084_lvs4:
<6>[    0.183954] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
<6>[    0.183965] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
<6>[    0.184245] krait0: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.184679] krait1: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.185107] krait2: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.185516] krait3: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.213926] msm-thermal qcom,msm-thermal.74: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
<6>[    0.213945] msm-thermal qcom,msm-thermal.74: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
<6>[    0.214733] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
<6>[    0.214909] msm-thermal qcom,msm-thermal.74: probe_thermal_efuse_read:Failed reading node=/soc/qcom,msm-thermal, key=qcom,efuse-data. KTM continues
<3>[    0.215043] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<4>[    0.215654] 8084_l18: Failed to create debugfs directory
<4>[    0.215675] 8084_lvs1: Failed to create debugfs directory
<6>[    0.217546] sensor_hub_init: power on
<6>[    0.217575] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.217586] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[    0.219422] 8084_mvs1:
<6>[    0.223292] sps:BAM 0xf9984000 (va:0xc4ee0000) enabled: ver:0x6, number of pipes:20
<6>[    0.223304] sps:BAM 0xf9984000 is registered.
<6>[    0.223318] sps:sps is ready.
<6>[    0.225941] gdsc_venus:
<6>[    0.226212] gdsc_mdss:
<6>[    0.226526] gdsc_jpeg:
<6>[    0.226862] gdsc_vfe:
<6>[    0.227111] gdsc_oxili_gx:
<6>[    0.227170] gdsc_oxili_gx: supplied by 8084_s7_corner
<6>[    0.227450] gdsc_oxili_cx:
<6>[    0.227671] gdsc_usb_hsic:
<3>[    0.228269] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
<6>[    0.233718] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5200000
<6>[    0.234261] Physical OCMEM zone layout:
<6>[    0.234273]  zone graphics	: 0xfec00000 - 0xfecfffff (1024 KB)
<6>[    0.234285]  zone lp_audio	: 0xfed00000 - 0xfed7ffff ( 512 KB)
<6>[    0.234301]  zone video	: 0xfed00000 - 0xfed7ffff ( 512 KB)
<6>[    0.253996] bio: create slab <bio-0> at 0
<6>[    0.254756] ethernet_phy:
<6>[    0.254992] vph_pwr:
<6>[    0.255338] max77826_module_init
<6>[    0.256322] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
<3>[    0.256406] ION-heap mm: Cannot specify alignment for this type of heap
<6>[    0.256687] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
<3>[    0.256767] ION-heap adsp: Cannot specify alignment for this type of heap
<6>[    0.256947] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
<6>[    0.257647] ION heap iommuca created
<6>[    0.257674] ION heap system created
<6>[    0.257783] ION heap kmalloc created
<6>[    0.257811] ION heap mm created at 0x69000000 with size a500000
<6>[    0.257835] ION heap adsp created at 0x64400000 with size 4b00000
<6>[    0.257857] ION heap qsecom created at 0x63000000 with size 1100000
<6>[    0.257928] ION heap audio created at 0x73b00000 with size 614000
<6>[    0.257967] ION heap pil_1 created at 0x04d00000 with size 1d00000
<6>[    0.257993] ION heap pil_2 created at 0x08000000 with size 5100000
<6>[    0.258313] ION heap camera_preview created at 0x74114000 with size 9600000
<5>[    0.259808] SCSI subsystem initialized
<6>[    0.259909] usbcore: registered new interface driver usbfs
<6>[    0.259960] usbcore: registered new interface driver hub
<6>[    0.260064] usbcore: registered new device driver usb
<6>[    0.261004] max77804k 13-0066: max77804k_i2c_probe
<6>[    0.261297] of_max77804k_dt: irq-gpio: 102
<6>[    0.261305] of_max77804k_dt: irq-base: 306
<6>[    0.261313] of_max77804k_dt: wc-irq-gpio: 0
<6>[    0.261323] of_max77804k_dt: timeout: 0
<6>[    0.261330] of_max77804k_dt: duty: 0
<6>[    0.261336] of_max77804k_dt: period: 0
<6>[    0.261343] of_max77804k_dt: pwm_id: 0
<6>[    0.261812] max77804k_i2c_probe: device found: rev.0x3, ver.0x0
<6>[    0.262708] func: max77804k_irq_init, irq_gpio: 102, irq_base: 306
<6>[    0.324674] max77804k-safeout max77804k-safeout: max77804k_pmic_probe
<6>[    0.324688] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:496] pdata->num_regulators:3
<6>[    0.324700] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:502] for in pdata->num_regulators:3
<6>[    0.324796] regulator regulator.61: func:max77804k_reg_enable
<6>[    0.325558] regulator regulator.61: func:max77804k_get_voltage
<6>[    0.325569] regulator regulator.61: func:max77804k_get_voltage_register
<6>[    0.326005] regulator regulator.61: func:max77804k_list_voltage_safeout
<6>[    0.326017] safeout1 range: at 4900 mV
<6>[    0.326026] regulator regulator.61: func:max77804k_get_voltage
<6>[    0.326035] regulator regulator.61: func:max77804k_get_voltage_register
<6>[    0.326471] regulator regulator.61: func:max77804k_list_voltage_safeout
<3>[    0.326572] Error-Bad Function Input
<6>[    0.326786] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:502] for in pdata->num_regulators:3
<6>[    0.326865] regulator regulator.62: func:max77804k_get_voltage
<6>[    0.326876] regulator regulator.62: func:max77804k_get_voltage_register
<6>[    0.327314] regulator regulator.62: func:max77804k_list_voltage_safeout
<6>[    0.327325] safeout2 range: at 4900 mV
<6>[    0.327334] regulator regulator.62: func:max77804k_get_voltage
<6>[    0.327343] regulator regulator.62: func:max77804k_get_voltage_register
<6>[    0.327778] regulator regulator.62: func:max77804k_list_voltage_safeout
<3>[    0.327860] Error-Bad Function Input
<6>[    0.327976] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:502] for in pdata->num_regulators:3
<6>[    0.328058] regulator regulator.63: func:max77804k_reg_enable
<6>[    0.328820] regulator regulator.63: func:max77804k_get_voltage
<6>[    0.328830] regulator regulator.63: func:max77804k_get_voltage_register
<6>[    0.329265] regulator regulator.63: func:max77804k_list_voltage
<6>[    0.329275] CHARGER: 60 <--> 2580 mA at 1440 mA
<6>[    0.330277] i2c-gpio i2c.87: using pins 60 (SDA) and 61 (SCL)
<6>[    0.330744] i2c-gpio i2c.88: using pins 87 (SDA) and 88 (SCL)
<6>[    0.331091] max77826_i2c_probe
<6>[    0.331100] max77826_i2c_probe: pdata
<6>[    0.331534] max77826_i2c_probe: DEVICE_ID: 0x2
<6>[    0.331615] max77826_get_voltage_register: id=0, reg=0x20, shift=0x0, mask=0x7f
<6>[    0.332079] max77826_ldo_set_voltage: id=0, reg=0x20, mask=0x7f, val=0x30, new=0x30
<6>[    0.332841] max77826_ldo1: 1200 mV normal
<6>[    0.332850] max77826_get_voltage_register: id=0, reg=0x20, shift=0x0, mask=0x7f
<6>[    0.333481] max77826_get_voltage_register: id=1, reg=0x21, shift=0x0, mask=0x7f
<6>[    0.333920] max77826_ldo_set_voltage: id=1, reg=0x21, mask=0x7f, val=0x20, new=0x20
<6>[    0.334679] max77826_ldo2: 1000 mV normal
<6>[    0.334689] max77826_get_voltage_register: id=1, reg=0x21, shift=0x0, mask=0x7f
<6>[    0.335307] max77826_get_voltage_register: id=2, reg=0x22, shift=0x0, mask=0x7f
<6>[    0.335747] max77826_ldo_set_voltage: id=2, reg=0x22, mask=0x7f, val=0x30, new=0x30
<6>[    0.336506] max77826_ldo3: 1200 mV normal
<6>[    0.336516] max77826_get_voltage_register: id=2, reg=0x22, shift=0x0, mask=0x7f
<6>[    0.337144] max77826_get_voltage_register: id=3, reg=0x23, shift=0x0, mask=0x7f
<6>[    0.337582] max77826_ldo_set_voltage: id=3, reg=0x23, mask=0x7f, val=0x28, new=0x28
<6>[    0.338341] max77826_ldo4: 1800 mV normal
<6>[    0.338351] max77826_get_voltage_register: id=3, reg=0x23, shift=0x0, mask=0x7f
<6>[    0.338962] max77826_get_voltage_register: id=4, reg=0x24, shift=0x0, mask=0x7f
<6>[    0.339401] max77826_ldo_set_voltage: id=4, reg=0x24, mask=0x7f, val=0x28, new=0x28
<6>[    0.340160] max77826_ldo5: 1800 mV normal
<6>[    0.340169] max77826_get_voltage_register: id=4, reg=0x24, shift=0x0, mask=0x7f
<6>[    0.340808] max77826_get_voltage_register: id=5, reg=0x25, shift=0x0, mask=0x7f
<6>[    0.341247] max77826_ldo6: 1800 <--> 3300 mV at 1800 mV normal
<6>[    0.341258] max77826_get_voltage_register: id=5, reg=0x25, shift=0x0, mask=0x7f
<6>[    0.341893] max77826_get_voltage_register: id=6, reg=0x26, shift=0x0, mask=0x7f
<6>[    0.342332] max77826_ldo_set_voltage: id=6, reg=0x26, mask=0x7f, val=0x28, new=0x28
<6>[    0.343090] max77826_ldo7: 1800 mV normal
<6>[    0.343100] max77826_get_voltage_register: id=6, reg=0x26, shift=0x0, mask=0x7f
<6>[    0.343731] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    0.344168] max77826_ldo8: 1800 <--> 3300 mV at 1800 mV normal
<6>[    0.344179] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    0.344803] max77826_get_voltage_register: id=8, reg=0x28, shift=0x0, mask=0x7f
<6>[    0.345243] max77826_ldo_set_voltage: id=8, reg=0x28, mask=0x7f, val=0x28, new=0x28
<6>[    0.346002] max77826_ldo9: 1800 mV normal
<6>[    0.346011] max77826_get_voltage_register: id=8, reg=0x28, shift=0x0, mask=0x7f
<6>[    0.346640] max77826_get_voltage_register: id=9, reg=0x29, shift=0x0, mask=0x7f
<6>[    0.347078] max77826_ldo10: 2800 <--> 2950 mV at 2800 mV normal
<6>[    0.347088] max77826_get_voltage_register: id=9, reg=0x29, shift=0x0, mask=0x7f
<6>[    0.347709] max77826_get_voltage_register: id=10, reg=0x2a, shift=0x0, mask=0x7f
<6>[    0.348148] max77826_ldo11: 2700 <--> 2950 mV at 2800 mV normal
<6>[    0.348158] max77826_get_voltage_register: id=10, reg=0x2a, shift=0x0, mask=0x7f
<6>[    0.348786] max77826_get_voltage_register: id=11, reg=0x2b, shift=0x0, mask=0x7f
<6>[    0.349224] max77826_ldo12: 2500 <--> 3300 mV at 3300 mV normal
<6>[    0.349234] max77826_get_voltage_register: id=11, reg=0x2b, shift=0x0, mask=0x7f
<6>[    0.349855] max77826_get_voltage_register: id=12, reg=0x2c, shift=0x0, mask=0x7f
<6>[    0.350294] max77826_ldo_set_voltage: id=12, reg=0x2c, mask=0x7f, val=0x64, new=0x64
<6>[    0.351052] max77826_ldo13: 3300 mV normal
<6>[    0.351062] max77826_get_voltage_register: id=12, reg=0x2c, shift=0x0, mask=0x7f
<6>[    0.351682] max77826_get_voltage_register: id=13, reg=0x2d, shift=0x0, mask=0x7f
<6>[    0.352152] max77826_ldo_set_voltage: id=13, reg=0x2d, mask=0x7f, val=0x64, new=0x64
<6>[    0.352910] max77826_ldo14: 3300 mV normal
<6>[    0.352920] max77826_get_voltage_register: id=13, reg=0x2d, shift=0x0, mask=0x7f
<6>[    0.353563] max77826_get_voltage_register: id=14, reg=0x2e, shift=0x0, mask=0x7f
<6>[    0.354001] max77826_ldo15: 1800 <--> 3300 mV at 1800 mV normal
<6>[    0.354011] max77826_get_voltage_register: id=14, reg=0x2e, shift=0x0, mask=0x7f
<6>[    0.354632] max77826_get_voltage_register: id=15, reg=0x31, shift=0x0, mask=0xff
<6>[    0.355072] max77826_ldo_set_voltage: id=15, reg=0x31, mask=0xff, val=0x74, new=0x74
<6>[    0.355831] max77826_buck1: 1225 mV normal
<6>[    0.355840] max77826_get_voltage_register: id=15, reg=0x31, shift=0x0, mask=0xff
<6>[    0.356464] max77826_get_voltage_register: id=16, reg=0x33, shift=0x0, mask=0x7f
<6>[    0.356903] max77826_ldo_set_voltage: id=16, reg=0x33, mask=0x7f, val=0x40, new=0x40
<6>[    0.357662] max77826_buck2: 3400 mV normal
<6>[    0.357672] max77826_get_voltage_register: id=16, reg=0x33, shift=0x0, mask=0x7f
<6>[    0.358240] i2c-gpio i2c.92: using pins 29 (SDA) and 30 (SCL)
<6>[    0.358676] i2c-gpio i2c.93: using pins 120 (SDA) and 121 (SCL)
<6>[    0.359062] i2c-gpio i2c.94: using pins 95 (SDA) and 96 (SCL)
<6>[    0.359510] i2c-gpio i2c.95: using pins 109 (SDA) and 108 (SCL)
<6>[    0.360117] Linux media interface: v0.10
<6>[    0.360161] Linux video capture interface: v2.00
<6>[    0.362747] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c4fe0000, with 3 ctx banks
<6>[    0.363818] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5080000, with 3 ctx banks
<6>[    0.365520] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c50a0000, with 5 ctx banks
<6>[    0.366522] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c50c0000, with 3 ctx banks
<6>[    0.367498] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c50e0000, with 3 ctx banks
<6>[    0.368594] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
<6>[    0.368708] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
<6>[    0.368818] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
<6>[    0.368950] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
<6>[    0.369071] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
<6>[    0.369181] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
<6>[    0.369307] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
<6>[    0.369428] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
<6>[    0.369542] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
<6>[    0.369651] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
<6>[    0.369764] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
<6>[    0.369907] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
<6>[    0.370016] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
<6>[    0.370129] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
<6>[    0.370249] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
<6>[    0.370358] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
<6>[    0.370467] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
<6>[    0.371927] [SENSORS CORE] sensors_class_init
<6>[    0.372019] fingerprint_class_init
<6>[    0.372085] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[    0.372530] Bluetooth: Core ver 2.16
<6>[    0.372577] NET: Registered protocol family 31
<6>[    0.372585] Bluetooth: HCI device and connection manager initialized
<6>[    0.372596] Bluetooth: HCI socket layer initialized
<6>[    0.372605] Bluetooth: L2CAP socket layer initialized
<6>[    0.372778] Bluetooth: SCO socket layer initialized
<4>[    0.372999] regulatory is not upadted via queue_regulatory_request.
<6>[    0.374560] Switching to clocksource arch_sys_counter
<6>[    0.403808] NET: Registered protocol family 2
<6>[    0.404014] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.404561] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[    0.406129] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>[    0.406849] TCP: Hash tables configured (established 131072 bind 65536)
<6>[    0.406859] TCP: reno registered
<6>[    0.406875] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.406929] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.407228] NET: Registered protocol family 1
<6>[    0.407526] Trying to unpack rootfs image as initramfs...
<3>[    0.464713] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    0.714679] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    0.964697] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    1.214707] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    1.464709] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    1.714707] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<6>[    1.961387] Freeing initrd memory: 3064K
<3>[    1.964867] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<6>[    1.966040] FIPS: self-tests for aes-asm (aes) passed
<6>[    1.966315] FIPS: self-tests for sha1-asm (sha1) passed
<6>[    1.966517] FIPS: self-tests for sha1-neon (sha1) passed
<6>[    1.966775] FIPS: self-tests for sha512-neon (sha512) passed
<6>[    1.967005] FIPS: self-tests for sha384-neon (sha384) passed
<6>[    1.967039] Detected 9 counters on the L2CC PMU.
<7>[    1.968901] gpiochip_find_base: found new base at 992
<6>[    1.969002] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
<7>[    1.969497] gpiochip_find_base: found new base at 960
<6>[    1.969578] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
<7>[    1.969614] gpiochip_find_base: found new base at 928
<6>[    1.969687] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
<7>[    1.970174] gpiochip_find_base: found new base at 896
<6>[    1.970253] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
<7>[    1.970289] gpiochip_find_base: found new base at 864
<6>[    1.970362] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
<7>[    1.970861] gpiochip_find_base: found new base at 832
<6>[    1.970941] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
<7>[    1.971008] gpiochip_find_base: found new base at 800
<6>[    1.971082] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
<7>[    1.971597] gpiochip_find_base: found new base at 768
<6>[    1.971672] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
<7>[    1.971713] gpiochip_find_base: found new base at 736
<6>[    1.971788] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
<7>[    1.972315] gpiochip_find_base: found new base at 704
<6>[    1.972394] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
<7>[    1.972458] gpiochip_find_base: found new base at 672
<6>[    1.972537] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
<7>[    1.973077] gpiochip_find_base: found new base at 640
<6>[    1.973152] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
<7>[    1.973187] gpiochip_find_base: found new base at 608
<6>[    1.973267] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
<7>[    1.973830] gpiochip_find_base: found new base at 576
<6>[    1.973906] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
<7>[    1.973979] gpiochip_find_base: found new base at 544
<6>[    1.974061] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
<7>[    1.975149] gpiochip_find_base: found new base at 512
<6>[    1.975225] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
<7>[    1.975264] gpiochip_find_base: found new base at 480
<6>[    1.975351] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
<7>[    1.975936] gpiochip_find_base: found new base at 448
<6>[    1.976013] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
<6>[    1.977943] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
<6>[    1.981743] pil_venus fdce0000.qcom,venus: using secure boot
<6>[    1.991558] NET: Registered protocol family 27
<1>[    1.996007] dma_test_init, minor number 64
<6>[    1.997327] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3
<6>[    1.997341] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 5
<6>[    1.997351] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
<6>[    2.000309] L2 @ 729600 KHz
<6>[    2.000468] CPU0 @ 960000 KHz
<6>[    2.000476] CPU1 @ unknown rate. Forcing new rate.
<6>[    2.000569] CPU1 @ 300000 KHz
<6>[    2.000576] CPU2 @ unknown rate. Forcing new rate.
<6>[    2.000665] CPU2 @ 300000 KHz
<6>[    2.000673] CPU3 @ unknown rate. Forcing new rate.
<6>[    2.000763] CPU3 @ 300000 KHz
<4>[    2.003755] ####init
<6>[    2.005145] SEC_MASTERSTATS : Init done
<5>[    2.006633] msm_rpm_log_probe: OK
<6>[    2.009759] register extcon notifier for JIG and docks
<6>[    2.014890] mpm_counter: [    2.014882]:(237863)
<3>[    2.017989] [BT] gpio_rev_init, gpio_bt_host_wake = 75
<7>[    2.018578] gpio_request: gpio-309 (bt_en) status -22
<3>[    2.018634] [BT] bcm4354_bluetooth_probe: gpio_request for gpio_bt_en is failed
<4>[    2.018733] ------------[ cut here ]------------
<4>[    2.018787] WARNING: at /home/jc/build/nethunter-kernel/klte/drivers/gpio/gpiolib.c:1317 0xc03cf93c()
<4>[    2.018795] Function entered at [<c010b440>] from [<c01932e8>]
<4>[    2.018801] Function entered at [<c01932e8>] from [<c01933bc>]
<4>[    2.018805] Function entered at [<c01933bc>] from [<c03cf93c>]
<4>[    2.018810] Function entered at [<c03cf93c>] from [<c018fe10>]
<4>[    2.018815] Function entered at [<c018fe10>] from [<c04a6b9c>]
<4>[    2.018820] Function entered at [<c04a6b9c>] from [<c04a6d7c>]
<4>[    2.018824] Function entered at [<c04a6d7c>] from [<c04a55fc>]
<4>[    2.018828] Function entered at [<c04a55fc>] from [<c04a5d04>]
<4>[    2.018832] Function entered at [<c04a5d04>] from [<c04a74e4>]
<4>[    2.018836] Function entered at [<c04a74e4>] from [<c0e00c08>]
<4>[    2.018841] Function entered at [<c0e00c08>] from [<c0e00dc0>]
<4>[    2.018845] Function entered at [<c0e00dc0>] from [<c01063f8>]
<4>[    2.018849] ---[ end trace da227214a82491b8 ]---
<6>[    2.018954] func:sec_therm_init
<6>[    2.019101] sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
<6>[    2.019136] sec_getlog_supply_kloginfo: 0xc1052010
<6>[    2.019228] audit: initializing netlink socket (enabled)
<4>[    2.019698] highmem bounce pool size: 64 pages
<6>[    2.021652] exFAT: Core Version 1.2.12
<6>[    2.021656] exFAT: FS Version 1.2.12
<6>[    2.021958] Registering sdcardfs 2.1.4
<6>[    2.022006] NTFS driver 2.1.30 [Flags: R/W].
<6>[    2.022094] fuse init (API version 7.18)
<7>[    2.022262] SELinux:  Registering netfilter hooks
<4>[    2.022513] key_dump feature not availabledek: initialized
<4>[    2.022522] SDP_MM: entering************************************************
<4>[    2.022565] SDP_PUB_CRYPTO[1]  : pub_crypto_mod_init netlink socket is created successfully!
<4>[    2.022615] SDP_FS_HANDLER[1]  : sdp_fs_handler_mod_init netlink socket is created successfully!
<6>[    2.022707] FIPS: No test for cipher_null (cipher_null-generic)
<6>[    2.022758] FIPS: No test for ecb(cipher_null) (ecb-cipher_null)
<6>[    2.022808] FIPS: No test for digest_null (digest_null-generic)
<6>[    2.022857] FIPS: No test for compress_null (compress_null-generic)
<6>[    2.022910] FIPS: self-tests for non-FIPS md5-generic (md5) passed
<6>[    2.022998] FIPS: self-tests for sha1-generic (sha1) passed
<6>[    2.023075] FIPS: self-tests for sha224-generic (sha224) passed
<6>[    2.023144] FIPS: self-tests for sha256-generic (sha256) passed
<6>[    2.023264] FIPS: self-tests for sha384-generic (sha384) passed
<6>[    2.023377] FIPS: self-tests for sha512-generic (sha512) passed
<6>[    2.023457] FIPS: self-tests for des-generic (des) passed
<6>[    2.023535] FIPS: self-tests for des3_ede-generic (des3_ede) passed
<6>[    2.023585] FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
<6>[    2.023669] FIPS: self-tests for aes-generic (aes) passed
<6>[    2.023719] FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
<6>[    2.023769] FIPS: self-tests for non-FIPS deflate-generic (deflate) passed
<6>[    2.023854] FIPS: self-tests for crc32c-generic (crc32c) passed
<6>[    2.023907] FIPS: No test for stdrng (krng)
<6>[    2.031380] FIPS: self-tests for ansi_cprng (stdrng) passed
<6>[    2.031436] FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
<3>[    2.031461] FIPS : Tcrypt Tests Start
<6>[    2.031641] FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
<6>[    2.031692] FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
<6>[    2.031879] FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
<6>[    2.031935] FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
<6>[    2.032045] FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
<6>[    2.032089] FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
<6>[    2.032265] FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
<6>[    2.032313] FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
<6>[    2.032430] FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
<6>[    2.032481] FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
<6>[    2.032664] FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
<6>[    2.032719] FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
<6>[    2.032750] FIPS: self-tests for sha1-generic (sha1) passed
<6>[    2.032774] FIPS: self-tests for sha224-generic (sha224) passed
<6>[    2.032798] FIPS: self-tests for sha256-generic (sha256) passed
<6>[    2.032865] FIPS: self-tests for sha384-generic (sha384) passed
<6>[    2.032930] FIPS: self-tests for sha512-generic (sha512) passed
<6>[    2.032957] FIPS: self-tests for sha1-asm (sha1) passed
<6>[    2.033102] FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
<6>[    2.033174] FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
<6>[    2.033320] FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
<6>[    2.033398] FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
<6>[    2.033550] FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
<6>[    2.033634] FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
<6>[    2.033834] FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
<6>[    2.033965] FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
<6>[    2.034266] FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
<6>[    2.034497] FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
<6>[    2.034855] FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
<6>[    2.035082] FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
<6>[    2.042543] FIPS: self-tests for fips_ansi_cprng (ansi_cprng) passed
<3>[    2.042546] FIPS : Tcrypt Tests End
<3>[    2.042654] FIPS(query_symbol_addresses): Error Invalid Addresses.
<3>[    2.042709] FIPS(do_integrity_check): Error to get start / end addresses
<3>[    2.042860] tcrypt: CRYPTO API started in FIPS mode!!!
<6>[    2.043025] FIPS: self-tests for ghash-generic (ghash) passed
<6>[    2.043099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
<6>[    2.043106] io scheduler noop registered (default)
<7>[    2.043447] gpiochip_find_base: found new base at 426
<6>[    2.043485] gpiochip_add: registered GPIOs 426 to 447 on device: pma8084-gpio
<7>[    2.044107] qcom,qpnp-pin qpnp-pin-ea52a200: qpnp_pin_probe: gpio_chip registered between 426-447
<7>[    2.045031] gpiochip_find_base: found new base at 419
<6>[    2.045066] gpiochip_add: registered GPIOs 419 to 425 on device: pma8084-mpp
<7>[    2.045434] qcom,qpnp-pin qpnp-pin-ea52a400: qpnp_pin_probe: gpio_chip registered between 419-425
<6>[    2.045762] [pcal6416a_gpio_probe]
<3>[    2.045806] [pcal6416a_parse_dt]: Unable to read pcal6416a,supply-name
<6>[    2.045909] [pcal6416a_parse_dt] 0x00040401
<6>[    2.045914] [pcal6416a_parse_dt] initialize reg 0xa0b0 0x0008 0x0221 0x0000
<6>[    2.045919] [pcal6416a_parse_dt]gpio_start=[300]ngpio=[16]reset-gpio=[145]
<6>[    2.045922] [pcal6416a_parse_dt] supply-name=[8084_s4]
<4>[    2.045960] 8084_s4: Failed to create debugfs directory
<6>[    2.046142] pcal6416a_power_ctrl: gpio expander 1.8V on is finished.
<3>[    2.046147] [pcal6416a gpio expander] pcal6416a_power_ctrl enable(1)
<6>[    2.046444] [pcal6416a_reset_chip]: gpio expander reset.
<6>[    2.046449] [pcal6416a_gpio_setup] GPIO Expander Init setting
<6>[    2.050225] [pcal6416a_gpio_probe]Expander setup success [0]
<6>[    2.050263] gpiochip_add: registered GPIOs 300 to 315 on device: gpio-expander
<6>[    2.050268] pcal6416a-gpio 17-0020: gpios 300..315 on a gpio-expander
<6>[    2.050433] mdss_mdp_probe: mdss_mdp_probe : ++
<6>[    2.050456] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5100000
<6>[    2.050478] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc50b2000
<3>[    2.050573] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
<3>[    2.050676] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-ad-off : spec error in device tree
<6>[    2.050775] mdss_mdp_parse_dt_ad_cfg: SS is not using assertive display
<6>[    2.051657] mdss_mdp_probe: mdss_mdp_probe : --
<6>[    2.052036] mdss_dsi_driver_init ++
<6>[    2.052119] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
<6>[    2.052141] mdss_dsi_get_panel_cfg:628: cfg:[0:mdss_dsi_samsung_1080p_cmd_fa2]
<6>[    2.052153] mdss_dsi_panel_init: Panel Name = samsung amoled 1080p command mode dsi S6E3FA2 panel
<6>[    2.052372] mdss_dsi_parse_panel_features:2743 Partial update enabled
<6>[    2.052378] mdss_dsi_parse_panel_features: ulps feature disabled
<6>[    2.052383] mdss_dsi_panel_init: Continuous splash enabled
<6>[    2.052467] mdss_samsung_create_sysfs: done!!
<6>[    2.052471] [mdss_dsi_panel_init] CONFIG_MDNIE_LITE_TUNING ok ! init class called!
<3>[    2.052475] [mdnie lite] start!
<3>[    2.052567] [mdnie lite] end!
<6>[    2.052620] mdss_dsi_panel_init : --
<6>[    2.052624] dsi_panel_device_register : ++
<6>[    2.052660] mdss_dsi_regulator_init: vregn(3)
<6>[    2.052862] mdss_dsi_regulator_init: vdd3 - VREG_LVS4 (i/o) init..
<6>[    2.052871] dsi_panel_device_register:2046, broadcast (0)
<3>[    2.052898] dsi_panel_device_register:2131, Disp_en_gpio (439)
<3>[    2.053007] dsi_panel_device_register:2421, Disp_te_gpio (12)
<3>[    2.053129] dsi_panel_device_register:2470, Disp_rst_gpio (442)
<6>[    2.053322] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c50d2800 ctrl_size=1f8 phy_base=c50d4b00 phy_size=2b0
<6>[    2.053444] dsi_panel_device_register : splash enabled..panel_power_on (1)
<6>[    2.053450] mdss_dsi_panel_power_on: enable=1 vregn(3)
<6>[    2.054216] mdss_dsi_extra_power: ++ enable(1) ndx(0)
<6>[    2.054220] mdss_dsi_extra_power: lvs4(VDD3) enable.
<6>[    2.066062] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
<6>[    2.066198] mdss_hw_init: MDP Rev=10020001
<6>[    2.066945] dsi_panel_device_register: Panel data initialized
<6>[    2.066949] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized
<6>[    2.066962] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
<6>[    2.066983] mdss_dsi_get_panel_cfg:628: cfg:[0:mdss_dsi_samsung_1080p_cmd_fa2]
<3>[    2.066988] mdss_dsi_pref_prim_panel:can't find panel phandle
<3>[    2.067087] mdss_dsi_ctrl_probe: can't find panel node 0:mdss_dsi_samsung_1080p_cmd_fa2
<4>[    2.067146] mdss_dsi_ctrl: probe of fd922e00.qcom,mdss_dsi failed with error 32
<6>[    2.067391] mdss_dsi_driver_init --
<6>[    2.067396] mdss_dsi_status_init: DSI status check interval:5000
<6>[    2.067559] hdmi_tx_get_dt_data : drm_orkaround = true
<6>[    2.067571] hdmi_tx_init_resource: 'core_physical': start = 0xc50d8100, len=0x370
<6>[    2.067580] hdmi_tx_init_resource: 'phy_physical': start = 0xc50da500, len=0x7c
<6>[    2.067590] hdmi_tx_init_resource: 'qfprom_physical': start = 0xc50f8000, len=0x60f0
<6>[    2.068012] mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx
<6>[    2.068671] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.7
<6>[    2.069245] mdss_fb_parse_dt: split framebuffer left=0 right=0
<6>[    2.069251] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 1
<3>[    2.069259] mdss_fb_alloc_fbmem_iommu: unable to alloc fbmem size=1f00000
<4>[    2.069357] mdss_fb_register: unable to allocate fb memory in fb register
<6>[    2.069409] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
<3>[    2.069442] samsung_dsi_panel_event_handler : unknown event (1)
<6>[    2.069504] mdss_mdp_cmd_tearcheck_cfg: te->tear_check_en = 1, res=1920 vclks=a5 height=65520 init=1920 rd=1921 start=1920
<6>[    2.069509] thrd_start =4 thrd_cont=4
<7>[    2.069568] Registered led device: lcd-backlight
<6>[    2.069581] mdss_dsi_panel_registered mds.mfd is ok!!
<6>[    2.069585] [mdss_dsi_panel_registered] CONFIG_MDNIE_LITE_TUNING ok ! mdnie_lite_tuning_init called!
<6>[    2.069589] mdss_dsi_panel_registered:2190, Panel registered succesfully
<6>[    2.069598] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
<6>[    2.069617] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 1
<4>[    2.069621] mdss_fb_alloc_fbmem_iommu: reserve size is smaller than framebuffer size
<3>[    2.069625] mdss_fb_alloc_fbmem_iommu: unable to alloc fbmem size=0
<4>[    2.069724] mdss_fb_register: unable to allocate fb memory in fb register
<6>[    2.069768] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
<6>[    2.069811] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
<6>[    2.069830] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 1
<4>[    2.069835] mdss_fb_alloc_fbmem_iommu: reserve size is smaller than framebuffer size
<3>[    2.069839] mdss_fb_alloc_fbmem_iommu: unable to alloc fbmem size=0
<4>[    2.069893] mdss_fb_register: unable to allocate fb memory in fb register
<6>[    2.069937] mdss_fb_register: FrameBuffer[2] 1920x1080 registered successfully!
<6>[    2.069963] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
<6>[    2.069977] sii8240_init sii8240: check mhl
<6>[    2.070017] gpio: mhl_irq = 31
<6>[    2.070036] gpio: mhl_reset = 423
<6>[    2.070041] of_sii8240_parse_dt() gpio_mhl_reset_type = 3
<6>[    2.070054] gpio: mhl_scl = 11
<6>[    2.070067] gpio: mhl_sda = 10
<6>[    2.070073] swing_level = 0x25
<6>[    2.070077] barcode_emul = false
<6>[    2.070081] drm_workaround = true
<6>[    2.070213] of_sii8240_parse_dt: hdmi_pdev [0Xea4f3200] to pdata->pdev
<6>[    2.070243] sii8240_mhlv2dt 3-0039: success client_addr 0x39
<6>[    2.070411] sii8240_mhlv2dt 3-0039: sii8240 irq : 304
<6>[    2.070420] sii8240_mhlv2dt 3-0039: sii8240: registering input device
<6>[    2.070489] input: sii8240_rcp as /devices/virtual/input/input0
<6>[    2.070691] sii8240_mhlv2dt 3-0049: success client_addr 0x49
<6>[    2.070704] sii8240_mhlv2dt 3-004d: success client_addr 0x4D
<6>[    2.070717] sii8240_mhlv2dt 3-0059: success client_addr 0x59
<6>[    2.070729] sii8240_mhlv2dt 3-0064: success client_addr 0x64
<3>[    2.083045] sps: BAM device 0xf9944000 is not registered yet.
<6>[    2.083155] sps:BAM 0xf9944000 is registered.
<6>[    2.085067] f995e000.uart: ttyHS0 at MMIO 0xf995e000 (irq = 146) is a MSM HS UART
<3>[    2.086457] sps: BAM device 0xf9904000 is not registered yet.
<6>[    2.086519] sps:BAM 0xf9904000 is registered.
<6>[    2.088067] f991d000.uart: ttyHS3 at MMIO 0xf991d000 (irq = 139) is a MSM HS UART
<6>[    2.089575] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
<6>[    2.089645] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
<6>[    2.091864] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
<6>[    2.091938] f995d000.serial: ttyHSL1 at MMIO 0xf995d000 (irq = 145) is a MSM
<6>[    2.094472] msm_serial_hsl_init: driver initialized
<6>[    2.096508] diagchar initialized now
<3>[    2.096972] kgsl: adreno_of_read_property: Unable to read 'qcom,pm-qos-latency'
<4>[    2.097630] kgsl bus ib [0] = 2456000000
<4>[    2.097634] kgsl bus ib [1] = 3680000000
<4>[    2.097637] kgsl bus ib [2] = 4912000000
<4>[    2.097641] kgsl bus ib [3] = 7464000000
<4>[    2.097644] kgsl bus index is 3 for pwrlevel 0
<4>[    2.097648] kgsl bus index is 2 for pwrlevel 1
<4>[    2.097651] kgsl bus index is 2 for pwrlevel 2
<4>[    2.097654] kgsl bus index is 1 for pwrlevel 3
<4>[    2.097657] kgsl bus index is 0 for pwrlevel 4
<4>[    2.097660] kgsl bus index is 0 for pwrlevel 5
<6>[    2.098170] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
<4>[    2.098634] kgsl: num bus is 4
<6>[    2.099324] GPU_SYSFS ----------- gpu_sysfs_init -- 224
<6>[    2.099562] GPU_SYSFS ----------- gpu_sysfs_probe -- 158
<6>[    2.099566] GPU_SYSFS ----------- gpu_sysfs_device_init -- 144
<6>[    2.099570] GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 29
<6>[    2.099590] GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 115
<6>[    2.099594] GPU_SYSFS ----------- gpu_sysfs_probe -- 178
<6>[    2.099608] GPU_SYSFS ----------- gpu_sysfs_init -- 250
<6>[    2.101823] brd: module loaded
<6>[    2.102963] loop: module loaded
<4>[    2.103313] QSEECOM: qseecom_probe: support_bus_scaling=0x1
<4>[    2.103319] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
<4>[    2.103324] QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0
<4>[    2.103328] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
<4>[    2.103333] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
<4>[    2.103360] QSEECOM: qseecom_probe: secure app region addr=0x7300000 size=0xd00000
<6>[    2.103800] init tzic
<6>[    2.103935] irda_ice40_init
<6>[    2.103968] irda_ice40_probe probe!
<6>[    2.104088] irda_ice40_config
<6>[    2.104092] g_pdata->fw_ver  = 2
<6>[    2.104095] g_pdata->rst_n   = 303
<6>[    2.104098] g_pdata->spi_clk = 108
<6>[    2.104101] g_pdata->spi_si  = 109
<6>[    2.104103] g_pdata->irda_irq= 101
<6>[    2.104107] g_pdata->cresetb = 436
<4>[    2.104112] irda_ice40_config: warning check pin num[-22]
<4>[    2.104139] irda_ice40_config: warning check pin num[-22]
<6>[    2.104143] pcal6416a_gpio_request
<6>[    2.104147] pcal6416a_gpio_direction_output(off=[3], val=[0])
<6>[    2.105066] irda_ice40_probe complete[1433]
<4>[    2.105134] i2c-core: driver [tabla-i2c-core] using legacy suspend method
<4>[    2.105138] i2c-core: driver [tabla-i2c-core] using legacy resume method
<4>[    2.105200] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
<4>[    2.105204] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
<6>[    2.105364] SCSI Media Changer driver v0.25
<4>[    2.105589] spi_qsd f9966000.spi: msm_spi_dt_to_pdata pdata->use_bam: 1
<6>[    2.105858] sps:BAM 0xf9944000 (va:0xc5140000) enabled: ver:0x13, number of pipes:24
<6>[    2.109263] msm_spi_dt_to_pdata: disable bam for BLSP5 tzspi
<4>[    2.109269] spi_qsd f9927000.spi: msm_spi_dt_to_pdata pdata->use_bam: 0
<4>[    2.109274] spi_qsd f9927000.spi: using default bus_num -1
<4>[    2.112440] spi_qsd f9967000.spi: msm_spi_dt_to_pdata pdata->use_bam: 0
<4>[    2.112446] spi_qsd f9967000.spi: using default bus_num -1
<6>[    2.115787] tun: Universal TUN/TAP device driver, 1.6
<6>[    2.115791] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    2.115825] rmnet_init: BAM devices[9]
<6>[    2.118265] PPP generic driver version 2.4.2
<6>[    2.118317] PPP BSD Compression module registered
<6>[    2.118321] PPP Deflate Compression module registered
<6>[    2.118446] FIPS: self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
<6>[    2.118472] PPP MPPE Compression module registered
<6>[    2.118477] NET: Registered protocol family 24
<6>[    2.118483] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[    2.118488] CSLIP: code copyright 1989 Regents of the University of California.
<7>[    2.118493] function asix_init line 3883
<6>[    2.118513] usbcore: registered new interface driver asix
<6>[    2.118530] usbcore: registered new interface driver cdc_ether
<6>[    2.118546] usbcore: registered new interface driver net1080
<6>[    2.118563] usbcore: registered new interface driver cdc_subset
<6>[    2.118579] usbcore: registered new interface driver zaurus
<6>[    2.118643] usbcore: registered new interface driver cdc_ncm
<6>[    2.119866] Get USB 3.0 redriver GPIO address
<3>[    2.119924] /soc/qcom,ssusb@f9200000: could not find phandle
<6>[    2.124678] ice40_fpga_firmware_update_klte[436] fw_ver 2
<6>[    2.124684] ice40_fpga_fimrware_update_start
<6>[    2.124689] ice40_clock_en:103 - on : 1
<6>[    2.214634] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[    2.214659] msm_thermal:msm_therm_temp_log (0 --- 45)(1 --- 41)(2 --- 38)(3 --- 39)(4 --- 45)(5 --- 49)(6 --- 52)(7 --- 51)(8 --- 48)(9 --- 41)(10 --- 38)
<6>[    2.368077] dwc3-msm: sec_otg_init is called.
<6>[    2.368082] sec_otg_init: register notifier
<3>[    2.368088] get_vbus_detect_gpio, cannot get vbus-detect-gpio, ret=-22
<6>[    2.369081] usbcore: registered new interface driver cdc_acm
<6>[    2.369085] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    2.369090] Initializing USB Mass Storage driver...
<6>[    2.369106] usbcore: registered new interface driver usb-storage
<6>[    2.369109] USB Mass Storage support registered.
<6>[    2.369126] usbcore: registered new interface driver ums-alauda
<6>[    2.369141] usbcore: registered new interface driver ums-cypress
<6>[    2.369155] usbcore: registered new interface driver ums-datafab
<6>[    2.369169] usbcore: registered new interface driver ums_eneub6250
<6>[    2.369183] usbcore: registered new interface driver ums-freecom
<6>[    2.369197] usbcore: registered new interface driver ums-isd200
<6>[    2.369211] usbcore: registered new interface driver ums-jumpshot
<6>[    2.369225] usbcore: registered new interface driver ums-karma
<6>[    2.369239] usbcore: registered new interface driver ums-onetouch
<6>[    2.369253] usbcore: registered new interface driver ums-sddr09
<6>[    2.369267] usbcore: registered new interface driver ums-sddr55
<6>[    2.369284] usbcore: registered new interface driver ums-usbat
<6>[    2.369322] usbcore: registered new interface driver usbserial
<6>[    2.369326] usbserial: USB Serial Driver core
<6>[    2.369340] usbcore: registered new interface driver pl2303
<6>[    2.369356] USB Serial support registered for pl2303
<6>[    2.369516] host_notifier host-notifier.44: notifier_probe
<7>[    2.369982] usb: android_bind disconnect
<6>[    2.370012] mbim_init: initialize 1 instances
<6>[    2.370049] mbim_init: Initialized 1 ports
<6>[    2.370907] rndis_qc_init: initialize rndis QC instance
<6>[    2.371102]  gadget: Mass Storage Function, version: 2009/09/11
<6>[    2.371107]  gadget: Number of LUNs=1
<6>[    2.371112]  lun0: LUN: removable CD-ROM file: (no medium)
<3>[    2.371206] conn_gadget_function_init(#) call conn_gadget_setup
<6>[    2.371310] conn_gadget_setup
<7>[    2.371431] usb: composite_bind idVendor=0x0, idProduct=0x0
<7>[    2.371435] usb: composite_bind bcdDevice=0x0
<7>[    2.371439] usb: composite_bind composite_manufacturer=
<6>[    2.371445]  gadget: android_usb ready
<6>[    2.372572] mousedev: PS/2 mouse device common for all mice
<3>[    2.372689] cypress_touchkey_probe: start!
<6>[    2.372945] cypress_touchkey 21-0020: cypress_power_onoff: power on
<4>[    2.372960] max77826_ldo15: Failed to create debugfs directory
<6>[    2.372968] max77826_get_voltage_register: id=14, reg=0x2e, shift=0x0, mask=0x7f
<6>[    2.373366] max77826_ldo_set_voltage: id=14, reg=0x2e, mask=0x7f, val=0x28, new=0x28
<6>[    2.374133] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.374525] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.374938] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.400343] FPGA firmware update success
<6>[    2.403212] ice40_clock_en:103 - on : 0
<6>[    2.535610] cypress_touchkey 21-0020: tkey_i2c_check: ic_fw_ver = 0x1d, module_ver = 0x06, CY device = 0x10
<6>[    2.575218] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
<6>[    2.575291] input: sec_touchkey as /devices/i2c.94/i2c-21/21-0020/input/input1
<6>[    2.575331] cypress_touchkey 21-0020: gpio_to_irq IRQ 627
<6>[    2.575539] cypress_touchkey 21-0020: TKEY MODULE 0x06! system_rev:e
<6>[    2.575544] tkey/semco_cypress_tkey.fw!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
<6>[    2.575550] cypress_touchkey 21-0020: the fw 0x1d is loaded (size=8192) hdr_len=16
<6>[    2.575556] cypress_touchkey 21-0020: tkey_flash_fw : part fw ver:0x1d, phone fw ver:0x1d, header ver:0x1
<6>[    2.575562] cypress_touchkey 21-0020: tkey_flash_fw : IC aleady have latest firmware (fw:0x1d module:0x6)
<6>[    2.575578] cypress_touchkey 21-0020: tkey_fw_update_work : touchkey_update Start!!
<3>[    2.575585] [TKEY] start..
<6>[    2.575642] cypress_touchkey 21-0020: cypress_touchkey_probe: done
<6>[    2.575646] cypress_touchkey 21-0020: cypress_power_onoff: power off
<6>[    2.575651] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<3>[    2.575677] cypress_touchkey_init: init done 0
<6>[    2.575871] usbcore: registered new interface driver xpad
<3>[    2.575894] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_probe start.
<6>[    2.575998] synaptics_rmi4_i2c 2-0020: synaptics_parse_dt: supply0: max77826_ldo13
<6>[    2.576004] synaptics_rmi4_i2c 2-0020: synaptics_parse_dt: supply1: 8084_lvs2
<6>[    2.576012] synaptics_rmi4_i2c 2-0020: synaptics_parse_dt: Unable to read synaptics,sub-project
<3>[    2.576017] synaptics_parse_dt: OCTA ID = 1
<6>[    2.576032] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<3>[    2.576121] synaptics_parse_dt: power= -22, tsp_int= 433, X= 1079, Y= 1919, project= K, config[0][0][129][0], tablet = 0 reset= -22 surface-only= 0
<6>[    2.576339] max77826_get_op_register: id=12, reg=0x13, mask=0x2, pattern=0x2
<6>[    2.577003] max77826_get_op_register: id=12, reg=0x13, mask=0x2, pattern=0x2
<6>[    2.577354] max77826_get_op_register: id=12, reg=0x13, mask=0x2, pattern=0x2
<6>[    2.577966] synaptics_rmi4_i2c 2-0020: synaptics_power_ctrl: max77826_ldo13 is enabled[OK]
<6>[    2.579600] synaptics_rmi4_i2c 2-0020: synaptics_power_ctrl: 8084_lvs2 is enabled[OK]
<6>[    2.589087] cypress_touchkey 21-0020: cypress_power_onoff: power on
<6>[    2.589092] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.589443] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.589793] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<3>[    2.605659] [TKEY] re run check.
<6>[    2.735094] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F34 found (page 0): INT_SRC[21] BASE_ADDRS[00,08,00,1f]
<6>[    2.735522] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f34_read_version: [IC] test_result[0][date, revision, version] [04/10, 0xA3, 0x55], Bootlader : vV646
<6>[    2.735786] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F01 found (page 0): INT_SRC[01] BASE_ADDRS[04,0C,1E,25]
<6>[    2.735928] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_check_status: Device status[0x81] status.code[1]
<6>[    2.736348] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F12 found (page 0): INT_SRC[01] BASE_ADDRS[06,11,00,44]
<6>[    2.737453] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_set_feature: 0x0
<6>[    2.738017] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: Function 12 max x = 1079 max y = 1919
<6>[    2.738524] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: 12 num_Rx:28 num_Tx:16, node:448, threshold:30, gloved sensitivity:e3
<6>[    2.738888] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: jitter filter strenth = 40, glove jitter filter strenght = 200
<6>[    2.739515] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F54 found (page 1): INT_SRC[01] BASE_ADDRS[00,0D,38,39]
<6>[    2.740500] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F55 found (page 3): INT_SRC[01] BASE_ADDRS[00,00,04,05]
<6>[    2.741127] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F51 found (page 4): INT_SRC[61] BASE_ADDRS[00,18,00,57]
<3>[    2.741396] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: f51 query feature feature1:55, feature2:1A
<6>[    2.741627] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: edge_swipe: 040B, detection_flag2 : 0409
<6>[    2.741633] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: sidekey_threshold addr : 0447, stylus_enable_addr : 0455
<6>[    2.743694] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: Number of interrupt registers = 1 sum of intr_count = 6
<6>[    2.744923] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: [s5100 A3 F] package_id is 12597, package_rev is 12336
<6>[    2.745118] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F34 : NUM_SOURCE[21] NUM_INT_REG[00] INT_MASK[00]
<6>[    2.745124] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F12 : NUM_SOURCE[01] NUM_INT_REG[00] INT_MASK[04]
<6>[    2.745129] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F51 : NUM_SOURCE[61] NUM_INT_REG[00] INT_MASK[20]
<6>[    2.745135] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: Interrupt enable mask 0 = 0x24
<6>[    2.745554] input: sec_touchscreen as /devices/f9924000.i2c/i2c-2/2-0020/input/input2
<6>[    2.745564] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_input_open
<3>[    2.745570] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_start_device already power on
<6>[    2.751830] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_fwu_init: [IC] [F01 product info, ID] [0x0000 0x0000, s5100 A3 F]
<6>[    2.752047] synaptics_rmi4_i2c 2-0020: fwu_read_f34_queries: F34 Query : ID: V646
<3>[    2.758022] synaptics_rmi4_i2c 2-0020: rmidb_scan_pdt: Failed to find FDB
<3>[    2.766344] [TKEY] do not need fw update.
<6>[    2.766455] cypress_touchkey 21-0020: cypress_power_onoff: power off
<6>[    2.766460] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.766869] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.773842] cypress_touchkey 21-0020: cypress_power_onoff: power on
<6>[    2.773848] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.774199] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.774548] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.802950] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_fw_update_on_probe: Load firmware : tsp_synaptics/synaptics_s5100_k_a3.fw
<6>[    2.802959] synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: [FW size, version] [105536, 0xA355/0xA355(BIN/IC), prog bit[0]
<6>[    2.802966] synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: pr_base:0x74, BL ver: 0x10, IC/FW pr_number : 1642224 / 1642224
<6>[    2.802972] synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: Do not need to update
<6>[    2.803819] using rtc device, qpnp_rtc, for alarms
<6>[    2.803834] qcom,qpnp-rtc qpnp-rtc-ea52aa00: rtc core: registered qpnp_rtc as rtc0
<3>[    2.803906] qcom,qpnp-rtc qpnp-rtc-ea52aa00: Probe success !!
<6>[    2.803980] i2c /dev entries driver
<7>[    2.805077] msm_vidc: 1: Failed to read qcom,load-freq-tbl from device tree
<7>[    2.805082] msm_vidc: 1: no elements in frequency table
<7>[    2.805086] msm_vidc: 1: Failed to read qcom,reg-presets from device tree
<7>[    2.805138] msm_vidc: 1: Failed to read qcom,buffer-type-tz-usage-table from device tree
<7>[    2.805145] msm_vidc: 1: Q6 hfi device probe called
<7>[    2.805258] msm_vidc: 1: debugfs_create_file: fail
<4>[    2.805596] msm_probe : Succeed!
<3>[    2.805995] cam_dummy_init_module:182
<3>[    2.806069] cam_dummy_platform_probe:87
<4>[    2.806502] cam_dummy_init_module: succeed
<4>[    2.807217] msm_cci_probe : Succeed!
<6>[    2.810882] msm_camera_power_up:1427 rear sensor: L, core_ver: 0 (0x30)
<3>[    2.810888] msm_camera_request_gpio_table:545 invalid gpio_tbl   (null) / size 0
<6>[    2.810944] msm_camera_config_single_vreg enable max77826_ldo8
<6>[    2.810980] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    2.811335] max77826_ldo_set_voltage: id=7, reg=0x27, mask=0x7f, val=0x28, new=0x28
<6>[    2.811947] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<6>[    2.812297] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<3>[    2.814931] error : not power up cci
<6>[    2.815100] msm_eeprom_match_id: read 0xF815, check Fidelix 32Mb:0xF815, Winbond 32Mb:0xEF15, Macronix 32Mb:0xC236, GigaDevice 32Mb:0xC815
<6>[    2.835614] cypress_touchkey 21-0020: tkey_i2c_check: ic_fw_ver = 0x1d, module_ver = 0x06, CY device = 0x10
<3>[    2.844197] msm_eeprom_match_crc: map version = 5
<6>[    2.844257] msm_eeprom_verify_sum: checksum pass 0xcdec24
<6>[    2.844312] msm_eeprom_verify_sum: checksum pass 0x55dc94b0
<6>[    2.844316] msm_eeprom_verify_sum: checksum pass 0x7d2b9389
<6>[    2.844335] msm_eeprom_verify_sum: checksum pass 0xe54f27cc
<6>[    2.844341] msm_eeprom_verify_sum: checksum pass 0x753bb7f2
<6>[    2.844396] msm_eeprom_verify_sum: checksum pass 0x46d16187
<6>[    2.844414] msm_eeprom_verify_sum: checksum pass 0x8ff138c
<6>[    2.844585] msm_eeprom_verify_sum: checksum pass 0x250d165a
<3>[    2.844589] All CRC values are matched.
<6>[    2.844662] msm_camera_config_single_vreg disable max77826_ldo8
<6>[    2.844668] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<6>[    2.845283] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    2.845632] max77826_ldo_set_voltage: id=7, reg=0x27, mask=0x7f, val=0x28, new=0x28
<3>[    2.848292] msm_camera_request_gpio_table:545 invalid gpio_tbl   (null) / size 0
<4>[    2.848433] msm_eeprom_spi_setup success result=0 supported=1ff X
<4>[    2.848591] MSM-SENSOR-DRIVER msm_sensor_driver_init:640 msm_sensor_driver_init : Enter
<3>[    2.849057] msm_sensor_get_sub_module_index qcom,companion cell index 0, rc 0
<3>[    2.849158] msm_sensor_get_sub_module_index qcom,companion cell index 1, rc 0
<4>[    2.849748] MSM-SENSOR-DRIVER msm_sensor_driver_parse:617 g_sctrl[0] e9a36c00
<4>[    2.849750]
<4>[    2.850030] MSM-SENSOR-DRIVER msm_sensor_driver_parse:617 g_sctrl[2] e9a36e00
<4>[    2.850032]
<4>[    2.850045] MSM-SENSOR-DRIVER msm_sensor_driver_init:644 probe success
<3>[    2.850419] [syscamera][camera_dcdc_probe::136]
<3>[    2.850519] [syscamera][ncp6335b_parse_dt::126]
<3>[    2.875226] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x0, failed.
<3>[    2.884642] qup_i2c f9923000.i2c: GPIO pins have no active setting
<3>[    2.884752] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    2.884807] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    2.884907] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    2.884961] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    2.885028] [syscamera][ncp6335b_read::67]Read Error [-110]
<3>[    2.885127] [syscamera][ncp6335b_read::68]NCP6335B PID[ffffff92]
<6>[    2.915219] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
<6>[    2.915224] cypress_touchkey 21-0020: tkey_fw_update_work : touchkey_update pass!!
<3>[    2.924639] qup_i2c f9923000.i2c: GPIO pins have no active setting
<3>[    2.924749] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    2.924804] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    2.924858] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    2.924912] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    2.925022] [syscamera][ncp6335b_read::72]Read Error [-110]
<3>[    2.925077] [syscamera][ncp6335b_read::73]NCP6335B [0x10 Read :: ffffff92]
<4>[    2.964692] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    2.964737] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    2.964752] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    2.964807] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    2.964906] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    2.964960] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    2.965071] [syscamera][ncp6335b_read::77]Read Error [-110]
<3>[    2.965126] [syscamera][ncp6335b_read::78]NCP6335B [0x11 Read :: ffffff92]
<4>[    3.004648] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.004693] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.004707] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.004761] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.004858] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.004912] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.005021] [syscamera][ncp6335b_read::82]Read Error [-110]
<3>[    3.005075] [syscamera][ncp6335b_read::83]NCP6335B [0x14 Read :: ffffff92]
<3>[    3.005173] [syscamera][camera_dcdc_probe::173][pid::-110]
<4>[    3.044655] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.044749] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.044764] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.044863] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.044916] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.045014] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.045080] [syscamera][ncp6335b_write::43]Write Error [-110]
<4>[    3.084642] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.084687] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.084701] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.084800] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.084854] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.084952] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.085018] [syscamera][ncp6335b_write::47]Write Error [-110]
<4>[    3.124642] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.124687] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.124702] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.124757] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.124855] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.124909] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.125019] [syscamera][ncp6335b_write::51]Write Error [-110]
<3>[    3.125117] [syscamera][ncp6335b_init_module::214][rc::0]
<6>[    3.125238] [syscamera][fan53555_init_module::322][rc::0]
<3>[    3.126163] __msm_jpeg_init:908] Jpeg Device id 0
<3>[    3.126303] __msm_jpeg_init:908] Jpeg Device id 1
<3>[    3.126490] __msm_jpeg_init:908] Jpeg Device id 2
<6>[    3.141878] lirc_dev: IR Remote Control driver registered, major 230
<6>[    3.141936] IR NEC protocol handler initialized
<6>[    3.141940] IR RC5(x) protocol handler initialized
<6>[    3.141943] IR RC6 protocol handler initialized
<6>[    3.141947] IR JVC protocol handler initialized
<6>[    3.141950] IR Sony protocol handler initialized
<6>[    3.141954] IR RC5 (streamzap) protocol handler initialized
<6>[    3.141958] IR SANYO protocol handler initialized
<6>[    3.141961] IR MCE Keyboard/mouse protocol handler initialized
<6>[    3.141965] IR LIRC bridge handler initialized
<6>[    3.141969] gspca_main: v2.14.0 registered
<6>[    3.142011] usbcore: registered new interface driver uvcvideo
<6>[    3.142015] USB Video Class driver (1.1.1)
<6>[    3.178632] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[    3.178644] Bluetooth: BlueSleep Mode Driver Ver 1.1
<3>[    3.178820] bluesleep probe
<3>[    3.178821]  [BT]
<6>[    3.179399] cpuidle: using governor ladder
<6>[    3.179403] cpuidle: using governor menu
<6>[    3.179421] sdhci: Secure Digital Host Controller Interface driver
<6>[    3.179425] sdhci: Copyright(c) Pierre Ossman
<6>[    3.179777] sdhci-pltfm: SDHCI platform and OF driver helper
<3>[    3.179989] sdhci_msm_populate_pdata: before parsing vendor_type
<3>[    3.181649] sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
<3>[    3.187128] sdhci_msm_vreg_disable: vdd-io Cannot find Regulator
<3>[    3.187446] mmc0: id 1
<6>[    3.188536] mmc0: no vmmc regulator found
<6>[    3.190623] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
<3>[    3.190704] sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
<3>[    3.190761] sdhci_msm_populate_pdata: before parsing vendor_type
<3>[    3.190867] sdhci_msm_populate_pdata: vendor_type=4
<3>[    3.198121] mmc1: id 2
<4>[    3.198222]  Enter brcm_wifi_status_register
<6>[    3.198226] brcm_wifi_status_register: callback is c06f73b0, devid is e9a84c40
<3>[    3.198231] mmc1: id 2, register_status_notify=c0176614, host=e9a84c40, rescan_disable=0
<6>[    3.199303] mmc1: no vmmc regulator found
<6>[    3.201382] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
<3>[    3.201875] sdhci_msm_populate_pdata: before parsing vendor_type
<3>[    3.210073] mmc2: id 3
<7>[    3.210128] sdhci_msm_probe : Change sysfs Card Detect
<6>[    3.211178] mmc2: no vmmc regulator found
<6>[    3.213257] mmc2: SDHCI controller on msm_sdcc.3 [msm_sdcc.3] using ADMA
<3>[    3.213521] i2c i2c-17: an30259a_probe
<4>[    3.213577] an30259a_parse_dt warning default dt parse[-22]
<4>[    3.213581] an30259a_parse_dt warning lowpower dt parse[-22]
<4>[    3.213585] an30259a_parse_dt warning offset dt parse[-22]
<6>[    3.213589] an30259a_parse_dt LED default 0x28, lowpower 0x5
<6>[    3.213593] an30259a_parse_dt LED R_off[0x0] G_off[0x0] B_off[0x0]
<7>[    3.215755] Registered led device: led_r
<7>[    3.218109] Registered led device: led_g
<7>[    3.220459] Registered led device: led_b
<3>[    3.222986] [zealottt] max77804k_led_probe
<7>[    3.223116] Registered led device: leds-sec1
<7>[    3.228353] Registered led device: torch-sec1
<4>[    3.237766] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
<4>[    3.237771] QCE50: __qce_get_device_tree_data: ce-device =0x0
<4>[    3.237787] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
<4>[    3.237791] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc53c0000
<4>[    3.237795] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
<4>[    3.237800] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<6>[    3.240079] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
<6>[    3.240086] qce qcedev.0: CE device = 0x0
<6>[    3.240087] , IO base, CE = 0xc53c0000
<6>[    3.240089] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
<6>[    3.240091] IO base BAM = 0x0
<6>[    3.240092] BAM IRQ 268
<6>[    3.240093] Engines Availability = 0x1010853
<6>[    3.240119] QCE50: qce_sps_get_bam: qce50 don't support command descriptor. bam_cfg7fff004
<6>[    3.240128] sps:BAM 0xfd444000 is registered.
<6>[    3.240285] sps:BAM 0xfd444000 (va:0xc51e0000) enabled: ver:0x20, number of pipes:8
<3>[    3.240292] sps:BAM 0xfd444000 pipe 3 sharing violation
<3>[    3.240347] sps:Failed to connect BAM 0xe9bb9e00 pipe 3
<3>[    3.242464] QCE50: qce_sps_init_ep_conn: sps_connect() fail pipe_handle=0xe9a1ce00, rc = -1
<3>[    3.242583] sps:De-init client in connected state: 0x1535053
<4>[    3.242713] qce: probe of qcedev.0 failed with error -1
<4>[    3.245171] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
<4>[    3.245176] QCE50: __qce_get_device_tree_data: ce-device =0x0
<4>[    3.247208] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
<4>[    3.247212] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc5540000
<4>[    3.247220] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
<4>[    3.247224] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<4>[    3.247374] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
<3>[    3.247385] QCE50: __qce_init_clk: Unable to get CE core clk
<3>[    3.247440] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
<4>[    3.249573] qcrypto: probe of fd440000.qcom,qcrypto failed with error -2
<4>[    3.249594] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x0
<4>[    3.249599] QCE50: __qce_get_device_tree_data: ce-device =0x1
<4>[    3.249612] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
<4>[    3.249616] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc5580000
<4>[    3.249620] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
<4>[    3.249624] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<4>[    3.249760] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
<3>[    3.249771] QCE50: __qce_init_clk: Unable to get CE core clk
<3>[    3.249825] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
<4>[    3.251960] qcrypto: probe of fd440000.qcom,qcrypto1 failed with error -2
<6>[    3.252792] Successfully registered hid_synaptics_driver
<6>[    3.252827] usbcore: registered new interface driver usbhid
<6>[    3.252831] usbhid: USB HID core driver
<6>[    3.253212] ashmem: initialized
<6>[    3.253242] logger: created 2048K log 'log_main'
<6>[    3.253286] logger: created 512K log 'log_events'
<6>[    3.253323] logger: created 2048K log 'log_radio'
<6>[    3.253353] logger: created 512K log 'log_system'
<6>[    3.253359] sec_getlog_supply_loggerinfo: 0xc1457b54 0xc1257b54 0xc11d7b54 0xc1157b54
<6>[    3.254377] sps:BAM 0xf9304000 is registered.
<6>[    3.254392] sps:BAM 0xf9a44000 is registered.
<3>[    3.254398] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
<6>[    3.254722] qcom,qpnp-power-on qpnp-power-on-ea529800: PMIC@SID0 Power-on reason: Triggered from CBL (external power supply) and 'warm' boot
<6>[    3.254740] qcom,qpnp-power-on qpnp-power-on-ea529800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
<6>[    3.254886] input: qpnp_pon as /devices/virtual/input/input3
<6>[    3.255470] qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
<6>[    3.255947] PMIC@SID0: PMA8084 v2.1 options: 0, 2, 2, 2
<6>[    3.256270] mckernelapi : Mobicore API module initialized!
<6>[    3.256284] MobiCore mcd: MobiCore Driver, Build: Tue May 24 00:04:12 2016
<6>[    3.256289] MobiCore mcd: MobiCore mcDrvModuleApi version is 1.1
<6>[    3.256411] sec-fuelgauge 19-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loading
<6>[    3.256515] fuelgauge_parse_dt reading fg_irq = 446
<6>[    3.256636] fuelgauge_parse_dt reading bat_int_gpio = 425
<6>[    3.256643] fuelgauge_parse_dt: fg_irq: 446, calculation_type: 0x17, fuel_alert_soc: 2,
<6>[    3.256645] repeated_fuelalert: 0
<6>[    3.256649] board_fuelgauge_init : assign battery data
<6>[    3.256656] board_fuelgauge_init: RCOMP0: 0x5d, RCOMP_charging: 0x5d, temp_cohot: -175, temp_cocold: -5825, is_using_model_data: 1, type_str: SDI, capacity_max: 990, capacity_max_margin: 50, capacity_min: -7,
<6>[    3.257358] sec-fuelgauge 19-0036: MAX17048 Fuel-Gauge Ver 0x0012
<6>[    3.258745] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[    3.259443] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[    3.259448] sec-fuelgauge 19-0036: sec_fg_calculate_dynamic_scale: 1011 is used for capacity_max
<3>[    3.260202] max17048_get_current: Fail to get psy (sec-charger)
<3>[    3.260260] max17048_get_current_average: Fail to get psy (sec-charger)
<3>[    3.260360] max17048_get_current_average: Fail to get psy (battery)
<6>[    3.261877] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[    3.262636] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[    3.262642] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<3>[    3.262651] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
<3>[    3.263542] max17048_get_current: Fail to get psy (sec-charger)
<3>[    3.263644] max17048_get_current_average: Fail to get psy (sec-charger)
<3>[    3.263700] max17048_get_current_average: Fail to get psy (battery)
<6>[    3.265336] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[    3.266095] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[    3.266100] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<3>[    3.266109] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
<6>[    3.267509] sec-fuelgauge 19-0036: sec_fuelgauge_probe: fg_irq = 630
<6>[    3.267642] sec-fuelgauge 19-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loaded
<6>[    3.267679] func:max77804k_charger_init
<6>[    3.267854] max77804k_charger_probe: MAX77804K Charger driver probe
<6>[    3.267997] sec_charger_parse_dt use bat irq -22
<3>[    3.268004] max77804k-charger max77804k-charger: max77804k_charger_probe : Failed to get charger int
<6>[    3.268947] max77804k_irq_thread: interrupt source(0x01)
<6>[    3.269297] max77804k_irq_thread: charger interrupt(0x40)
<6>[    3.273550] max77804k_charger_initialize: battery cv voltage 0xdf
<6>[    3.273900] max77804k_charger_probe: device found: ver.0x4
<6>[    3.274347] max77804k_get_charger_state: CHG_DTLS : 0x 2
<6>[    3.275061] max77804k_get_health_state: bat_dtls(0x3) int_mask(0xff)
<3>[    3.275067] max77804k_get_health_state: Fail to get psy (battery)
<3>[    3.275511] max77804k_get_vbus_state: Fail to get psy (battery)
<6>[    3.276255] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x2
<6>[    3.276260] max77804k_get_health_state: unmask wcin int
<6>[    3.277214] sec_chg_get_property: reg_data(93)
<6>[    3.277576] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    3.277956] sec_chg_get_property: reg_data(93)
<6>[    3.278312] max77804k_get_charger_state: CHG_DTLS : 0x 2
<6>[    3.279087] max77804k_get_health_state: bat_dtls(0x3) int_mask(0xdf)
<3>[    3.279094] max77804k_get_health_state: Fail to get psy (battery)
<3>[    3.279596] max77804k_get_vbus_state: Fail to get psy (battery)
<6>[    3.280403] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x2
<6>[    3.280772] sec_chg_get_property: reg_data(93)
<6>[    3.281124] max77804k_get_input_current: CHG_CNFG_09(0x48)
<3>[    3.284862] [VIB] ++ max77804k_haptic_probe
<3>[    3.284917] [VIB] -- max77804k_haptic_probe
<6>[    3.285006] [SSP] ssp_probe
<3>[    3.285010] [SSP] probe exit : lpm 0, recovery 1
<6>[    3.285136] max86900_probe - start
<4>[    3.285169] max77826_ldo4: Failed to create debugfs directory
<6>[    3.285174] max86900_regulator_onoff - onoff = 1
<6>[    3.285180] max77826_get_voltage_register: id=3, reg=0x23, shift=0x0, mask=0x7f
<6>[    3.285534] max77826_ldo_set_voltage: id=3, reg=0x23, mask=0x7f, val=0x28, new=0x28
<6>[    3.286147] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<6>[    3.286499] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<6>[    3.291225] mmc0: BKOPS_EN bit = 0
<4>[    3.324649] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.324697] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.324703] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.324760] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.324862] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.324920] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.328922] mmc0: new HS400 MMC card at address 0001
<6>[    3.329109] [mmc_blk_probe]mmcblk0: mmc0:0001 MAG2GC 14.6 GiB , card->type:0
<6>[    3.329199] mmcblk0rpmb: mmc0:0001 MAG2GC partition 3 512 KiB
<6>[    3.331485]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
<4>[    3.384664] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.384712] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.384719] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.384825] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.384880] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.384981] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.425604] cypress_touchkey 21-0020: tkey_i2c_check: ic_fw_ver = 0x1d, module_ver = 0x06, CY device = 0x10
<4>[    3.444646] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.444699] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.444710] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.444816] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.444872] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.444975] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.465276] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
<6>[    3.465348] cypress_touchkey 21-0020: cypress_touchkey_interrupt: not real interrupt (1).
<4>[    3.504638] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.504682] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.504692] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.504792] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.504846] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.504900] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    3.564637] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.564682] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.564691] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.564747] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.564846] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.564900] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.584627] max86900_read_reg -read transfer error
<4>[    3.624637] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.624681] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.624690] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.624790] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.624844] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.624898] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    3.684636] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.684681] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.684690] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.684745] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.684844] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.684898] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    3.744636] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.744681] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.744690] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.744745] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.744844] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.744898] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.771940] mmc2: new ultra high speed SDR50 SDXC card at address 59b4
<6>[    3.772099] [mmc_blk_probe]mmcblk1: mmc2:59b4 NCard 59.8 GiB , card->type:1
<6>[    3.776446]  mmcblk1: p1 < p5 >
<4>[    3.804637] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.804682] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.804692] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.804792] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.804846] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.804945] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    3.864636] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.864681] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.864690] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.864790] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.864844] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.864942] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.884626] max86900_read_reg -read transfer error
<3>[    3.884680] max86900_probe WHOAMI read fail
<4>[    3.884787] max77826_ldo4: Failed to create debugfs directory
<6>[    3.884791] max86900_regulator_onoff - onoff = 0
<6>[    3.884796] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<3>[    3.885418] max86900_probe failed
<6>[    3.885524] vfsspi_init
<6>[    3.885552] vfsspi_probe
<6>[    3.885583] vfsspi_parse_dt: sleepPin=57
<6>[    3.885596] vfsspi_parse_dt: drdyPin=64
<3>[    3.885601] vfsspi_parse_dt: fail to get ocp_pin
<6>[    3.885709] vfsspi_parse_dt: ocp_en=63
<6>[    3.885722] vfsspi_parse_dt: ldo_pin=130
<3>[    3.885727] vfsspi_parse_dt: not set ldo2 in dts
<6>[    3.885781] vfsspi_parse_dt: ldocontrol=1
<6>[    3.885790] vfsspi_parse_dt: orient=1
<6>[    3.885794] vfsspi_platformInit
<6>[    3.885800] vfsspi_platformInit ocp off
<6>[    3.885807] vfsspi_platformInit ldo off
<6>[    3.885914] vfsspi_disable_irq
<6>[    3.885920] vfsspi_platformInit drdy value =1
<6>[    3.885922] vfsspi_platformInit sleep value =0
<6>[    3.885923] vfsspi_platformInit ldo en value =0
<6>[    3.885927] vfsspi_platformInit vfsspi_platofrminit, status=0
<6>[    3.890262] vfsspi_regulator_onoff: on ocp_en: enable
<6>[    3.896385] vfsspi_hardReset
<6>[    3.924828] ValiditySensor: spi_sync returned 0
<6>[    3.924833] vfsspi_probe sensor type is RAPTOR
<6>[    3.924841] vfsspi_regulator_onoff: off ocp_en: enable
<6>[    3.924933] vfsspi_probe success...
<6>[    3.924949] vfsspi_init init is successful
<6>[    3.924961] func:max77804k_muic_init
<6>[    3.925179] func:max77804k_muic_probe
<6>[    3.925300] max77804k-muic max77804k-muic: adc:320 chgtype:324
<6>[    3.925317] dev_set_drvdata:max77804k_muic_probe
<6>[    3.925321] max77804k-muic max77804k-muic: func:max77804k_muic_set_adcdbset value:2
<6>[    3.925326] max77804k-muic max77804k-muic: max77804k_muic_set_adcdbset: ADCDBSET(0x02)
<6>[    3.926630] max77804k_muic_probe: ADCMODE(0x0)
<6>[    3.926895] max77804k_muic_probe: CDETCTRL1(0x0d)
<6>[    3.926926] max77804k-muic max77804k-muic: func:max77804k_muic_irq_init
<6>[    3.932481] max77804k-muic max77804k-muic: adc:320 chgtype:324 vbvolt:328
<6>[    3.932832] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=1, val=0
<6>[    3.933183] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=2, val=0
<6>[    3.933533] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=3, val=0
<6>[    3.933884] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=4, val=3f
<6>[    3.934234] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=5, val=43
<6>[    3.934584] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=6, val=40
<6>[    3.934953] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=7, val=1
<6>[    3.935304] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=8, val=11
<6>[    3.935310] max77804k-muic max77804k-muic: set path to (0)
<6>[    3.935314] max77804k_muic_set_safeout: MUIC safeout path=0
<6>[    3.937334] max77804k_muic_probe: uart en bit : 0
<6>[    3.937338] max77804k_muic_probe: MUIC path is OPEN from now.
<6>[    3.937691] max77804k-muic max77804k-muic: max77804k_muic_uart_uevent: state:0
<6>[    3.937697] notifier sec_otg_register_booster 169: register max77804k
<6>[    3.937798] usbcore: registered new interface driver snd-usb-audio
<6>[    3.939132] (NULL device *): es705_bus_init(): registered as SLIMBus
<6>[    3.945214] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
<6>[    3.945696] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
<6>[    3.946335] platform qcom,msm-voip-dsp.52: Driver msm-voip-dsp requests probe deferral
<6>[    3.946654] platform qcom,msm-pcm-voice.53: Driver msm-pcm-voice requests probe deferral
<6>[    3.948602] ocmem: Notifier registered for 5
<6>[    3.949047] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.949105] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.950035] Mirror/redirect action on
<6>[    3.950041] u32 classifier
<6>[    3.950044]     Actions configured
<6>[    3.950051] Netfilter messages via NETLINK v0.30.
<6>[    3.950082] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[    3.950271] ctnetlink v0.93: registering with nfnetlink.
<6>[    3.950291] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    3.950296] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    3.950415] xt_time: kernel timezone is -0000
<6>[    3.950425] 939-23012-001-quicksec-vpnclient-for-android-3.3.1-2811-b2567729009d-2015-01-30_13-36-53
<6>[    3.950429] vpnclient kernel spd loaded.
<6>[    3.950576] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.950696] arp_tables: (C) 2002 David S. Miller
<6>[    3.950725] TCP: bic registered
<6>[    3.950730] TCP: cubic registered
<6>[    3.950733] TCP: westwood registered
<6>[    3.950737] TCP: htcp registered
<6>[    3.950740] Initializing XFRM netlink socket
<6>[    3.950907] NET: Registered protocol family 10
<6>[    3.952017] Mobile IPv6
<6>[    3.952032] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.952109] IPv6 over IPv4 tunneling driver
<6>[    3.952330] NET: Registered protocol family 17
<6>[    3.952347] NET: Registered protocol family 15
<5>[    3.952382] Bridge firewalling registered
<6>[    3.952391] Ebtables v2.0 registered
<6>[    3.952411] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    3.952442] sii8240_init_cable_notify register extcon notifier for usb and ta
<6>[    3.952449] sec_otg_init_cable_notify register extcon notifier for usb and ta
<5>[    3.953032] Registering SWP/SWPB emulation handler
<6>[    3.957566] sec_debug_subsys_init: msm_shared_ram_phys=fa00000 SMEM_ID_VENDOR2=136 size=8780
<6>[    3.957578] sec_debug_subsys_init: krait(fa1b330) rpm(fa1bbf8) modem(fa1c46c) dsps(fa1cce0)
<3>[    3.957815] [SCFS] ERROR compr_init(151): cannot initialize compressor lzo, error -2
<3>[    3.957918] [SCFS] ERROR scfs_init(761): compressor initialization was failed.
<6>[    3.958097] max77826_get_op_register: id=16, reg=0x14, mask=0x8, pattern=0x8
<6>[    3.958462] max77826_get_op_register: id=15, reg=0x14, mask=0x2, pattern=0x2
<6>[    3.958819] max77826_get_op_register: id=13, reg=0x13, mask=0x8, pattern=0x8
<6>[    3.959177] max77826_get_op_register: id=11, reg=0x12, mask=0x80, pattern=0x80
<6>[    3.959534] max77826_get_op_register: id=10, reg=0x12, mask=0x20, pattern=0x20
<6>[    3.959891] max77826_get_op_register: id=9, reg=0x12, mask=0x8, pattern=0x8
<6>[    3.960248] max77826_get_op_register: id=8, reg=0x12, mask=0x2, pattern=0x2
<6>[    3.960605] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<6>[    3.960962] max77826_get_op_register: id=6, reg=0x11, mask=0x20, pattern=0x20
<6>[    3.961319] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    3.961676] max77826_get_op_register: id=4, reg=0x11, mask=0x2, pattern=0x2
<6>[    3.962032] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<6>[    3.962390] max77826_get_op_register: id=2, reg=0x10, mask=0x20, pattern=0x20
<6>[    3.962747] max77826_get_op_register: id=1, reg=0x10, mask=0x8, pattern=0x8
<6>[    3.963104] max77826_get_op_register: id=0, reg=0x10, mask=0x2, pattern=0x2
<6>[    3.963817] gdsc_oxili_gx: disabling
<6>[    3.963829] gdsc_venus: disabling
<6>[    3.964142] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.964191] sec_jack_probe : Registering jack driver
<6>[    3.964214] sec_jack_populate_dt_pdata : earjack-detect-gpio =445
<6>[    3.964228] sec_jack_populate_dt_pdata : earjack-sendend-gpio =77
<6>[    3.964234] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.964241] sec_jack_populate_dt_pdata : earjack-micbias-gpio =85
<6>[    3.964247] sec_jack_populate_dt_pdata : earjack-fsa_en-gpio =310
<6>[    3.964310] sec_jack_populate_dt_pdata : 4, 3, 10000, 10, 0
<6>[    3.964361] sec_jack_populate_dt_pdata : 4, 950, 10000, 10, 0
<6>[    3.964435] sec_jack_populate_dt_pdata : 4, 2400, 10000, 10, 1
<6>[    3.964539] sec_jack_populate_dt_pdata : 4, 9999, 10000, 10, 1
<6>[    3.964567] sec_jack_populate_dt_pdata : 3, 0, 0, 155
<6>[    3.964656] sec_jack_populate_dt_pdata : 3, 1, 156, 313
<6>[    3.964732] sec_jack_populate_dt_pdata : 3, 2, 314, 643
<6>[    3.964738] sec_jack_populate_dt_pdata - mpp-channel-scaling - 4 1 3
<6>[    3.964745] pcal6416a_gpio_request
<6>[    3.964750] pcal6416a_gpio_direction_output(off=[10], val=[1])
<6>[    3.964866] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.965031] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.965685] sec_jack_detect_work: detect_irq(0)
<6>[    3.966096] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.966265] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.966994] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.967156] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<3>[    3.967296] gpio-keys gpio_keys.96: [Keys] no regulator: ignoring
<6>[    3.967419] gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:home_key, gpio:428, code:172, type:1, debounce:15
<6>[    3.967442] gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:volume_down, gpio:427, code:114, type:1, debounce:15
<6>[    3.967465] gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:volume_up, gpio:430, code:115, type:1, debounce:15
<6>[    3.967487] gpio-keys gpio_keys.96: [Hall_IC] device tree was founded
<7>[    3.967562] gpio_set_debounce: gpio-428 status -22
<7>[    3.967674] gpio_set_debounce: gpio-427 status -22
<7>[    3.967781] gpio_set_debounce: gpio-430 status -22
<6>[    3.967960] input: gpio-keys as /devices/gpio_keys.96/input/input4
<7>[    3.967968] [HALL_IC] : gpio_keys_open
<6>[    3.968130] gpio_keys_gpio_report_event: home_key key is released
<3>[    3.968135] sec_debug_check_crash_key code 172 value 0 state 0 enable 0
<6>[    3.968226] gpio_keys_gpio_report_event: volume_down key is released
<3>[    3.968231] sec_debug_check_crash_key code 114 value 0 state 0 enable 0
<6>[    3.968339] gpio_keys_gpio_report_event: volume_up key is released
<3>[    3.968343] sec_debug_check_crash_key code 115 value 0 state 0 enable 0
<6>[    3.968678] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.968685] qcom,qpnp-rtc qpnp-rtc-ea52aa00: setting system clock to 2014-05-25 16:59:55 UTC (1401037195)
<3>[    3.968691] [syscamera][msm_companion_init_module::2404]init companion module
<6>[    3.968855] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<3>[    3.969110] [syscamera][msm_companion_probe::2285][E]
<3>[    3.969215] [syscamera][msm_companion_get_dt_data::1433][qcom,cci-master::0][rc::0]
<6>[    3.969273] [syscamera][msm_companion_get_dt_data::1458]slave addr = 7a, sensor id = 73c1
<3>[    3.969278] [syscamera][msm_companion_probe::2336] i2c_func_tbl=cci
<3>[    3.969428] [syscamera][msm_companion_probe::2365] probe success
<3>[    3.969538] [syscamera][msm_companion_spi_probe::2224][E]
<6>[    3.969645] qcom_companion spi7.0: irq[0] cs[0] CPHA[0] CPOL[0] CS_HIGH[0]
<6>[    3.969650] qcom_companion spi7.0: max_speed[48000000]
<3>[    3.969656] [syscamera][msm_companion_spi_setup::2122]gpio-irq 28, rc 0
<6>[    3.969669] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.969883] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<3>[    3.969913] [syscamera][msm_companion_spi_setup::2210]spi probe success =0 X
<6>[    3.970033] Driver for 1-wire Dallas network protocol.
<6>[    3.970188] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<3>[    3.970283]
<3>[    3.970284] w1_gpio_msm_probe start
<6>[    3.970345] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.970515] input: w1 as /devices/onewire.89/input/input5
<3>[    3.970575] w1_uevent master_dev name = w1_bus_master1
<6>[    3.970660] w1_add_master_device : W1 workqueue will start
<6>[    3.970807] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.970896] msm_thermal:interrupt_mode_init Interrupt mode init
<6>[    3.970994] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.971695] sec_bat_parse_dt reading bat_int_gpio is empty
<6>[    3.971704] sec_bat_parse_dt: ta_irq_attr is Empty
<6>[    3.971714] sec_bat_parse_dt: chg_temp_check: 0
<6>[    3.971873] sec_bat_parse_dt: vendor : SDI SDI, technology : 2, cable_check_type : 6
<6>[    3.971875] cable_source_type : 1, use_wireless_to_pogo : 0, event_waiting_time : 600
<6>[    3.971878] polling_type : 1, initial_count : 3, check_count : 0
<6>[    3.971879] check_adc_max : 1440, check_adc_min : 0
<6>[    3.971881] ovp_uvlo_check_type : 3, thermal_source : 2
<6>[    3.971883] temp_check_type : 2, temp_check_count : 1
<6>[    3.971888] board_battery_init : assign temp adc table
<6>[    3.976576] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    3.976936] max77804k_get_input_current: CHG_CNFG_09(0x48)
<3>[    3.976942] max17048_get_current_average: Fail to get psy (battery)
<6>[    3.978443] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[    4.000161] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(271), Temp-ADC(33612)
<3>[    4.000870] max17048_rcomp_update: Fail to get psy (battery)
<6>[    4.001492] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    4.002200] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[    4.002206] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    4.002214] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4393mV),Inow(1800mA),Imax(0mA),SOC(100%),Tbat(271),is_hc_usb(0)
<6>[    4.002496] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    4.002522] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    4.002532] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    4.003111] sec_chg_get_property: reg_data(93)
<6>[    4.003122] sec_bat_check_cable_result_callback set ldo on
<4>[    4.003137] max77826_ldo6: Failed to create debugfs directory
<6>[    4.003143] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    4.003563] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    4.004280] sec_bat_check_cable_result_callback set ldo off
<4>[    4.004290] max77826_ldo6: Failed to create debugfs directory
<6>[    4.004296] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    4.005029] sec-battery battery.98: sec_battery_probe: SEC Battery Driver Loaded
<6>[    4.005241] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    4.005412] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    4.005844] tspdrv: tspdrv_probe.
<6>[    4.005865] tspdrv_parse_dt:382, changed_chip not specified
<7>[    4.005937] ImmVibeSPI_ForceOut_Initialize.
<4>[    4.005958] 8084_l23: Failed to create debugfs directory
<7>[    4.005966] haptic power_off is finished.
<7>[    4.005971] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[    4.006216] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    4.006386] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    4.006610] clock_late_init: Removing enables held for handed-off clocks
<6>[    4.008254] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    4.008967] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    4.010833] ALSA device list:
<6>[    4.010840]   No soundcards found.
<4>[    4.010880] Warning: unable to open an initial console.
<6>[    4.011067] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<5>[    4.011901] init: init started!
<7>[    4.013762] SELinux: 2048 avtab hash slots, 4855 rules.
<6>[    4.013777] SELinux:  Android master kernel running Android M policy in compatibility mode.
<7>[    4.014741] SELinux: 2048 avtab hash slots, 4855 rules.
<7>[    4.014751] SELinux:  1 users, 2 roles, 530 types, 0 bools, 1 sens, 1024 cats
<7>[    4.014759] SELinux:  87 classes, 4855 rules
<7>[    4.015332] SELinux:  Completing initialization.
<7>[    4.015336] SELinux:  Setting up existing superblocks.
<7>[    4.015348] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[    4.015363] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[    4.015839] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[    4.015850] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[    4.015865] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    4.015879] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<6>[    4.032968] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(271), Temp-ADC(33610)
<6>[    4.033917] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    4.034865] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[    4.034872] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    4.034879] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4393mV),Inow(1800mA),Imax(0mA),SOC(100%),Tbat(271),is_hc_usb(0)
<6>[    4.034886] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    4.034892] sec-battery battery.98: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
<7>[    4.037964] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[    4.037974] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[    4.037984] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[    4.037994] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[    4.038013] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[    4.038069] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    4.038089] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>[    4.048881] init: (Initializing SELinux enforcing took 0.04s.)
<5>[    4.052440] init: init second stage started!
<7>[    4.464666] [keys] flip_cover_work : 1 code 0x15
<3>[    4.731516] init: waitpid failed: No child processes
<3>[    4.731941] init: property_set("ro.hardware", "qcom") failed
<3>[    4.732050] init: property_set("ro.boot.bootdevice", "msm_sdcc.1") failed
<5>[    4.732393] init: (Loading properties from /default.prop took 0.00s.)
<3>[    4.732782] init: /init.rc: 57: invalid command 'load_all_props'
<3>[    4.732904] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
<5>[    4.733098] init: (Parsing /init.recovery.usb.rc took 0.00s.)
<5>[    4.733152] init: (Parsing /init.recovery.qcom.rc took 0.00s.)
<5>[    4.733167] init: (Parsing /init.rc took 0.00s.)
<5>[    4.733348] init: Starting service 'ueventd'...
<5>[    4.733566] init: Starting service 'healthd'...
<5>[    4.733734] init: Waiting for /dev/.coldboot_done...
<5>[    4.734912] ueventd: ueventd started!
<3>[    4.735519] healthd: wakealarm_init: timerfd_create failed
<3>[    4.873151] w1_uevent master_dev name = w1_bus_master1
<6>[    4.920375] max77804k_get_charger_state: CHG_DTLS : 0x 2
<6>[    4.921421] max77804k_get_health_state: bat_dtls(0x3) int_mask(0xde)
<6>[    4.922995] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x2
<6>[    4.923521] sec_chg_get_property: reg_data(93)
<6>[    4.924048] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    4.938656] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    4.939185] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    4.940996] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[    4.941905] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[    4.941911] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<3>[    4.941920] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
<6>[    5.050827] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    5.051360] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    5.053187] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[    5.075014] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(271), Temp-ADC(33621)
<6>[    5.075941] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    5.076860] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[    5.076866] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<6>[    5.076873] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4393mV),Inow(1800mA),Imax(0mA),SOC(100%),Tbat(271),is_hc_usb(0)
<6>[    5.076880] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    5.076887] sec-battery battery.98: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
<3>[    5.741835] init: Timed out waiting for /dev/.coldboot_done
<5>[    5.741915] init: Waiting for /dev/.coldboot_done took 1.01s.
<7>[    5.743064] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<5>[    5.744567] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
<3>[    5.744714] init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
<3>[    5.744824] init: cannot expand '${ro.product.model}' while writing to '/sys/class/android_usb/android0/iProduct'
<5>[    5.745180] init: (Loading properties from /system/build.prop took 0.00s.)
<5>[    5.745206] init: (Loading properties from /vendor/build.prop took 0.00s.)
<5>[    5.745232] init: (Loading properties from /factory/factory.prop took 0.00s.)
<3>[    5.745373] init: /recovery not specified in fstab
<5>[    5.745469] init: (Loading properties from /data/local.prop took 0.00s.)
<3>[    5.745492] init: Unable to open persistent property directory "/data/property": No such file or directory
<3>[    5.745662] init: Detected MSM SOC ID=194 SOC VER=65536 BOARD TYPE=MTP
<5>[    5.747388] init: Starting service 'set_permissive'...
<3>[    5.748604] init: Warning!  Service recovery needs a SELinux domain defined; please fix!
<5>[    5.748669] init: Starting service 'recovery'...
<3>[    5.748974] init: Warning!  Service qseecomd needs a SELinux domain defined; please fix!
<5>[    5.749089] init: Starting service 'qseecomd'...
<6>[    5.749317] usb: enabled: 0, dev->enabled: 0
<6>[    5.749462] usb: enabled: 0, dev->enabled: 0
<6>[    5.749598] usb: enabled: 1, dev->enabled: 0
<7>[    5.749605] usb: enable_store f_holder->f:mtp
<7>[    5.749609] usb: enable_store f_holder->f:adb
<7>[    5.749615] usb: enable_store vendor=4e8,product=6860,bcdDevice=232
<7>[    5.749619] ,Class=0,SubClass=0,Protocol=0
<7>[    5.749623] usb: enable_store next cmd : usb_add_config
<5>[    5.749669] init: Starting service 'adbd'...
<6>[    5.749873] usb: enabled: 0, dev->enabled: 1
<5>[    5.749892] init: Service 'adbd' is being killed...
<6>[    5.749950] usb: enabled: 1, dev->enabled: 0
<7>[    5.749957] usb: enable_store f_holder->f:mtp
<7>[    5.749961] usb: enable_store f_holder->f:adb
<7>[    5.749968] usb: enable_store vendor=4e8,product=6860,bcdDevice=232
<7>[    5.749973] ,Class=0,SubClass=0,Protocol=0
<7>[    5.749977] usb: enable_store next cmd : usb_add_config
<6>[    5.757154] adb_open
<6>[    5.757162] mtp_bind_config
<6>[    5.757182] adb_bind_config
<5>[    5.764450] init: Service 'set_permissive' (pid 212) exited with status 0
<5>[    5.766905] init: Service 'qseecomd' (pid 214) exited with status 255
<5>[    5.766922] init: Service 'qseecomd' (pid 214) killing any children in process group
<6>[    5.778850] mdss_fb_set_backlight: [BL1] bkl_lvl (162), bl_updated(0), power(0)
<6>[    5.780613] mdss_fb_set_backlight: [BL1] bkl_lvl (162), bl_updated(0), power(0)
<6>[    5.780791] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[    5.780796] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<6>[    5.780801] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[    5.780806] mdss_fb_set_backlight: [BL1] bkl_lvl (162), bl_updated(1), power(1)
<6>[    5.780811] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<6>[    5.780972] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK ++
<6>[    5.780978] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    5.780985] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK --
<6>[    5.782157] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[    5.782162] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<6>[    5.782166] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[    5.782170] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    5.782176] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<4>[    5.788911] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.788936] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.788958] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.788979] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789001] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789027] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789048] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789070] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789083] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789088] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789093] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789097] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789103] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789107] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789113] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789117] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789123] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789128] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789133] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789138] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789143] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789148] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<4>[    5.789153] vm_start=b5910000 vm_end=b6900000 vm_page_prot=1799
<6>[    5.796385] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK ++
<6>[    5.796390] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    5.796397] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK --
<6>[    5.796407] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[    5.796411] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<6>[    5.796415] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[    5.796418] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    5.796422] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<3>[    5.799049] samsung_dsi_panel_event_handler : unknown event (9)
<3>[    5.799074] samsung_dsi_panel_event_handler : unknown event (1)
<4>[    5.802585] mdss_dsi_on:1040 Panel already on.
<6>[    5.802593] mdss_dsi_panel_on : ++
<6>[    5.802596] mdss_dsi_panel_on: ctrl=e9f30010 ndx=0
<6>[    5.805190] mipi_samsung_manufacture_id: manufacture_id1=60
<6>[    5.808105] mipi_samsung_manufacture_id: manufacture_id2=28
<6>[    5.811004] mipi_samsung_manufacture_id: manufacture_id3=13
<6>[    5.811007] mipi_samsung_manufacture_id: manufacture_id=602813
<6>[    5.811010] set_panel_rev : 0x13 EVT1_K_fhd_REVI
<6>[    5.811013] mdss_dsi_panel_read_func : ++
<6>[    5.813812] mipi_samsung_disp_send_cmd done..
<6>[    5.822388] read_reg : C8[2] : 36 11 .
<6>[    5.825229] mipi_samsung_disp_send_cmd done..
<6>[    5.825233] manufacture_date = (20140617) - year(2014) month(6) day(17)
<6>[    5.828058] mipi_samsung_disp_send_cmd done..
<6>[    5.831283] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    5.836644] read_reg : D6[5] : 93 10 97 21 ae .
<6>[    5.839482] mipi_samsung_disp_send_cmd done..
<6>[    5.839487] mipi_samsung_ddi_id_read : 93 10 97 21 ae
<6>[    5.842310] mipi_samsung_disp_send_cmd done..
<6>[    5.850960] read_reg : C8[7] : 01 18 01 17 01 1c 07 .
<6>[    5.853787] mipi_samsung_disp_send_cmd done..
<6>[    5.856635] mipi_samsung_disp_send_cmd done..
<6>[    5.877024] read_reg : C8[15] : 82 7f 82 7c 7c 7c 7c .7c 7b 7e 7d 7e 7f 7f .7f .
<6>[    5.879863] mipi_samsung_disp_send_cmd done..
<6>[    5.882704] mipi_samsung_disp_send_cmd done..
<6>[    5.891300] read_reg : B6[1] : 13 .
<6>[    5.894147] mipi_samsung_disp_send_cmd done..
<6>[    5.896986] mipi_samsung_disp_send_cmd done..
<6>[    5.905583] read_reg : FD[1] : bc .
<6>[    5.908432] mipi_samsung_disp_send_cmd done..
<6>[    5.911269] mipi_samsung_disp_send_cmd done..
<6>[    5.919878] read_reg : A1[4] : 0b 9f 0c 56 .
<6>[    5.922704] mipi_samsung_disp_send_cmd done..
<6>[    5.922709] coordinate_tunning x : 2975, y : 3158, tune_number : 5
<6>[    5.922712] mdss_dsi_panel_read_func : --
<6>[    5.922715] mdss_dsi_panel_dimming_init : ++
<6>[    5.925553] mipi_samsung_disp_send_cmd done..
<6>[    5.957451] read_reg : C8[33] : 00 2a 00 12 00 5d 60 .62 60 5e 5f 5d 4c 4e .4c 51 56 51 60 64 60 .5e 63 63 48 59 54 5e .67 4d 02 03 02 .
<6>[    5.960285] mipi_samsung_disp_send_cmd done..
<6>[    5.960290] gamma_cell_determine ldi_revision: 0x602813
<6>[    5.960347] gamma_init_K_fhd_revI : start !!
<6>[    5.960359] gamma_init_K_fhd_revI : start !!
<6>[    5.960367] gamma_init_K_fhd_revI : start !!
<6>[    5.960376] gamma_init_K_fhd_revI : start !!
<6>[    5.960384] gamma_init_K_fhd_revI : start !!
<6>[    5.960393] gamma_init_K_fhd_revI : start !!
<6>[    5.960402] gamma_init_K_fhd_revI : start !!
<6>[    5.960410] gamma_init_K_fhd_revI : start !!
<6>[    5.960419] gamma_init_K_fhd_revI : start !!
<6>[    5.960427] gamma_init_K_fhd_revI : start !!
<6>[    5.960436] gamma_init_K_fhd_revI : start !!
<6>[    5.960444] gamma_init_K_fhd_revI : start !!
<6>[    5.960453] gamma_init_K_fhd_revI : start !!
<6>[    5.960462] gamma_init_K_fhd_revI : start !!
<6>[    5.960471] gamma_init_K_fhd_revI : start !!
<6>[    5.960480] gamma_init_K_fhd_revI : start !!
<6>[    5.960489] gamma_init_K_fhd_revI : start !!
<6>[    5.960498] gamma_init_K_fhd_revI : start !!
<6>[    5.960507] gamma_init_K_fhd_revI : start !!
<6>[    5.960516] gamma_init_K_fhd_revI : start !!
<6>[    5.960526] gamma_init_K_fhd_revI : start !!
<6>[    5.960535] gamma_init_K_fhd_revI : start !!
<6>[    5.960544] gamma_init_K_fhd_revI : start !!
<6>[    5.960554] gamma_init_K_fhd_revI : start !!
<6>[    5.960564] gamma_init_K_fhd_revI : start !!
<6>[    5.960573] gamma_init_K_fhd_revI : start !!
<6>[    5.960583] gamma_init_K_fhd_revI : start !!
<6>[    5.960593] gamma_init_K_fhd_revI : start !!
<6>[    5.960602] gamma_init_K_fhd_revI : start !!
<6>[    5.960612] gamma_init_K_fhd_revI : start !!
<6>[    5.960621] gamma_init_K_fhd_revI : start !!
<6>[    5.960632] gamma_init_K_fhd_revI : start !!
<6>[    5.960642] gamma_init_K_fhd_revI : start !!
<6>[    5.960652] gamma_init_K_fhd_revI : start !!
<6>[    5.960662] gamma_init_K_fhd_revI : start !!
<6>[    5.960672] gamma_init_K_fhd_revI : start !!
<6>[    5.960682] gamma_init_K_fhd_revI : start !!
<6>[    5.960693] gamma_init_K_fhd_revI : start !!
<6>[    5.960704] gamma_init_K_fhd_revI : start !!
<6>[    5.960714] gamma_init_K_fhd_revI : start !!
<6>[    5.960725] gamma_init_K_fhd_revI : start !!
<6>[    5.960736] gamma_init_K_fhd_revI : start !!
<6>[    5.960747] gamma_init_K_fhd_revI : start !!
<6>[    5.960758] gamma_init_K_fhd_revI : start !!
<6>[    5.960770] gamma_init_K_fhd_revI : start !!
<6>[    5.960781] gamma_init_K_fhd_revI : start !!
<6>[    5.960792] gamma_init_K_fhd_revI : start !!
<6>[    5.960804] gamma_init_K_fhd_revI : start !!
<6>[    5.960815] gamma_init_K_fhd_revI : start !!
<6>[    5.960827] gamma_init_K_fhd_revI : start !!
<6>[    5.960839] gamma_init_K_fhd_revI : start !!
<6>[    5.960851] gamma_init_K_fhd_revI : start !!
<6>[    5.960863] gamma_init_K_fhd_revI : start !!
<6>[    5.960875] gamma_init_K_fhd_revI : start !!
<6>[    5.960888] gamma_init_K_fhd_revI : start !!
<6>[    5.960900] gamma_init_K_fhd_revI : start !!
<6>[    5.960912] gamma_init_K_fhd_revI : start !!
<6>[    5.960924] gamma_init_K_fhd_revI : start !!
<6>[    5.960937] gamma_init_K_fhd_revI : start !!
<6>[    5.960949] gamma_init_K_fhd_revI : start !!
<6>[    5.960966] smart_dimming_init done
<6>[    5.960968] mdss_dsi_panel_dimming_init : --
<6>[    5.990046] mipi_samsung_disp_send_cmd done..
<5>[    6.036767] ueventd: Coldboot took 1.30s.
<6>[    6.097958] mipi_samsung_disp_send_cmd done..
<6>[    6.097966] get_elvss_tempcompen_control_set for ELVSS CONTROL acl(0), temp(20) B8(0x19)
<6>[    6.097970] get_elvss_tempcompen_control_set2 for ELVSS CONTROL acl(0), temp(20) B0(0x14) B6(0x13)
<6>[    6.097977] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,2,3)11,id3(0x13)
<6>[    6.097981] mipi_samsung_disp_send_cmd : panel is off state!!
<6>[    6.097984] [LCD]mipi_samsung_disp_send_cmd:Undefined command
<6>[    6.097990] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[    6.101202] mipi_samsung_disp_send_cmd done..
<3>[    6.101205] [mdnie lite] is negative Mode On = 0
<3>[    6.104378] [mdnie lite] mDNIe_Set_Mode end , UI_MODE(0), AUTO(4), OUTDOOR_OFF_MODE(0), ACCESSIBILITY_OFF(0)
<6>[    6.104381] mdss_dsi_panel_on : --
<6>[    6.120995] now restoring TE/ rdptr_enabled++
<6>[    6.135645] mipi_samsung_disp_send_cmd done..
<6>[    6.135649] [check_te_step1] ++
<6>[    6.138053] now restoring TE/ rdptr_enabled++
<6>[    6.156499] now restoring TE/ rdptr_enabled++
<6>[    6.156507] [check_te_step1] first TE = 18442
<6>[    6.156510] [check_te_step1] fctrl = 5e
<6>[    6.157027] mipi_samsung_disp_send_cmd done..
<6>[    6.157030] [check_te_step1] --
<6>[    6.157032] [check_te_step2] ++
<6>[    6.173232] now restoring TE/ rdptr_enabled++
<6>[    6.189944] now restoring TE/ rdptr_enabled++
<6>[    6.189952] [check_te_step2] second TE = 16708
<6>[    6.189955] [check_te_step2] offset = 0
<6>[    6.190472] mipi_samsung_disp_send_cmd done..
<6>[    6.190475] [check_te_step2] --
<6>[    6.190477] [check_te_step3] ++
<6>[    6.206647] now restoring TE/ rdptr_enabled++
<6>[    6.223357] now restoring TE/ rdptr_enabled++
<6>[    6.223365] [check_te_step3] finals TE is (16706) - OK
<6>[    6.223368] [check_te_step3] --
<6>[    6.223445] mipi_samsung_disp_send_cmd done..
<6>[    6.223522] mipi_samsung_disp_send_cmd done..
<6>[    6.223821] read_reg : A[1] : 9c .
<6>[    6.223896] mipi_samsung_disp_send_cmd done..
<6>[    6.223899] DISPLAY_ON
<3>[    6.225053] samsung_dsi_panel_event_handler : unknown event (9)
<6>[    6.225381] mdss_fb_set_backlight: [BL2] bkl_lvl (162), bl_updated(1)
<6>[    6.225391] [LCD]make_brightcontrol_set:bright_level: 162, candela_idx: 51( 220 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[    6.254427] mipi_samsung_disp_send_cmd done..
<6>[    6.284669] max77804k_chgin_init_work
<6>[    6.287109] max77804k_irq_thread: interrupt source(0x01)
<6>[    6.287688] max77804k_irq_thread: charger interrupt(0x40)
<3>[    6.303029] samsung_dsi_panel_event_handler : unknown event (9)
<7>[    6.321234] EXT4-fs (mmcblk0p25): ext4_orphan_cleanup: deleting unreferenced inode 131887
<6>[    6.321553] EXT4-fs (mmcblk0p25): 1 orphan inode deleted
<6>[    6.321558] EXT4-fs (mmcblk0p25): recovery complete
<6>[    6.326200] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.326217] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.340779] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    6.341317] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    6.343155] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[    6.364992] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(270), Temp-ADC(33625)
<6>[    6.365919] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    6.366837] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[    6.366843] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<6>[    6.366850] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4386mV),Inow(1800mA),Imax(0mA),SOC(100%),Tbat(270),is_hc_usb(0)
<6>[    6.366857] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    6.366864] sec-battery battery.98: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
<6>[    6.369371] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.369385] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.417233] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.417247] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.457212] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.457226] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.481660] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
<7>[    6.481674] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
<6>[    6.482619] SELinux:  Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).
<6>[    6.492106] FAT-fs (mmcblk0p2[179:2]): trying to mount...
<3>[    6.492118] FAT-fs (mmcblk0p2[179:2]): Unrecognized mount option "ro" or missing value
<3>[    6.492222] FAT-fs (mmcblk0p2[179:2]): failed to mount!
<6>[    6.494728] FAT-fs (mmcblk0p2[179:2]): trying to mount...
<6>[    6.499469] FAT-fs (mmcblk0p2[179:2]): mounted successfully!
<7>[    6.499485] SELinux: initialized (dev mmcblk0p2, type vfat), uses genfs_contexts
<6>[    6.500109] FAT-fs (mmcblk0p2[179:2]): trying to unmount...
<6>[    6.500116] FAT-fs (mmcblk0p2[179:2]): unmounted successfully!
<6>[    6.502070] FAT-fs (mmcblk0p1[179:1]): trying to mount...
<3>[    6.502078] FAT-fs (mmcblk0p1[179:1]): Unrecognized mount option "ro" or missing value
<3>[    6.502135] FAT-fs (mmcblk0p1[179:1]): failed to mount!
<6>[    6.504705] FAT-fs (mmcblk0p1[179:1]): trying to mount...
<6>[    6.509319] FAT-fs (mmcblk0p1[179:1]): mounted successfully!
<7>[    6.509326] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
<6>[    6.509940] FAT-fs (mmcblk0p1[179:1]): trying to unmount...
<6>[    6.509947] FAT-fs (mmcblk0p1[179:1]): unmounted successfully!
<6>[    6.518788] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
<7>[    6.518799] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
<6>[    6.544702] SELinux:  Context u:object_r:mpctl_socket:s0 is not valid (left unmapped).
<6>[    6.544837] SELinux:  Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
<6>[    6.545570] SELinux:  Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
<6>[    6.545835] SELinux:  Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
<6>[    6.546105] SELinux:  Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
<6>[    6.546447] SELinux:  Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
<6>[    6.546639] SELinux:  Context u:object_r:user_profile_foreign_dex_data_file:s0 is not valid (left unmapped).
<6>[    6.753514] SELinux:  Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
<6>[    6.753630] SELinux:  Context u:object_r:bootstat_data_file:s0 is not valid (left unmapped).
<6>[    6.944646] max77804k-muic max77804k-muic: func:max77804k_muic_init_detect
<6>[    6.945173] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev CONTROL1:0
<6>[    6.945807] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev irq:-1 ret:0
<6>[    6.945812] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: STATUS1:0x3f, 2:0x43
<6>[    6.945820] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x3, vbvolt:64 adc open prev:1
<6>[    6.945826] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: ATTACHED/CHANGED
<6>[    6.945830] max77804k-muic max77804k-muic: max77804k_muic_handle_attach:
<6>[    6.945835] max77804k-muic max77804k-muic: st1:0x3f st2:0x43
<6>[    6.945839] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x3, vbvolt:64
<6>[    6.945844] max77804k-muic max77804k-muic: chgdetrun:0x0, prev state:0x0
<6>[    6.945849] max77804k-muic max77804k-muic: state: cur=0x0, new=0x8, changed=0x8
<6>[    6.945855] extcon extcon-muic: extcon_set_cable_state: TA is attached
<6>[    6.945860] extcon extcon-muic: index = 3
<6>[    6.945865] extcon extcon-muic: state: 0x0, 0x8, mask: 0x8
<6>[    6.945869] extcon extcon-muic: state: 0x0 --> 0x8
<6>[    6.945875] extcon extcon-muic: _call_per_cable: TA is attached, calling 0xc05888a4
<6>[    6.945883] extcon extcon-muic: _call_per_cable: TA is attached, calling 0xc0771d54
<6>[    6.945890] sec-battery battery.98: batt_handle_notification: current_cable(3), wc_status(0), wire_status(3)
<6>[    6.945902] batt_handle_notification: CMD=ATTACH, attached_dev=3
<6>[    6.945952] max77804k-muic max77804k-muic: set_muic_path: current state=0x8, path=OPEN
<6>[    6.945957] max77804k-muic max77804k-muic: set_muic_path: don't have to set path
<6>[    6.946495] max77804k-muic max77804k-muic: max77804k_muic_uart_uevent: state:0
<6>[    6.946502] sec otg: TA is attached
<6>[    6.946513] sec_bat_check_cable_result_callback set ldo on
<4>[    6.946542] max77826_ldo6: Failed to create debugfs directory
<6>[    6.946549] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    6.947087] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    6.950368] max77804k_set_charge_current: reg_data(0xb4), charge(2100)
<6>[    7.005173] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.006610] max77804k_set_topoff_current: reg_data(0x24), topoff(200)
<6>[    7.007541] max77804k_irq_thread: interrupt source(0x01)
<6>[    7.008064] max77804k_irq_thread: charger interrupt(0x40)
<6>[    7.009000] sec-battery battery.98: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
<6>[    7.009006] sec-battery battery.98: sec_bat_cable_work: Polling time is reset to 30 sec.
<6>[    7.224641] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[    7.224673] msm_thermal:msm_therm_temp_log (0 --- 46)(1 --- 43)(2 --- 40)(3 --- 41)(4 --- 43)(5 --- 48)(6 --- 46)(7 --- 44)(8 --- 44)(9 --- 42)(10 --- 40)
<3>[    7.364643] dwc3 f9200000.dwc3: dwc3_otg_init_sm: completion timeout
<6>[    7.369324] msm-dwc3 msm_dwc3: DWC3 in low power mode
<6>[    7.507786] max77804k_chgin_isr_work: irq(319), chgin(0x3), chg_dtls(0x2) prev 0x3
<6>[    7.515300] max77804k_irq_thread: interrupt source(0x00)
<6>[    7.515313] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    7.515846] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[    7.517748] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[    7.539600] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(270), Temp-ADC(33627)
<6>[    7.540520] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    7.541427] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[    7.541433] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<6>[    7.541440] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4380mV),Inow(1800mA),Imax(1800mA),SOC(100%),Tbat(270),is_hc_usb(0)
<6>[    7.563278] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    7.564321] max77804k_get_health_state: bat_dtls(0x3) int_mask(0xda)
<6>[    7.565910] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x2
<6>[    7.565918] sec-battery battery.98: sec_bat_time_management: Charging Time : 1 secs
<6>[    7.565925] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[    7.566452] max77804k_get_charger_state: CHG_DTLS : 0x 2
<6>[    7.566457] sec-battery battery.98: sec_bat_fullcharged_check: Charging Mode : Normal
<6>[    7.566463] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(3), Vendor(SDI SDI), level(100%)
<6>[    8.726218] max77804k_chgin_isr_work: irq(319), chgin(0x3), chg_dtls(0x3) prev 0x3
<6>[    8.727718] max77804k_irq_thread: interrupt source(0x01)
<6>[    8.728241] max77804k_irq_thread: charger interrupt(0x40)
<6>[    9.936212] max77804k_chgin_isr_work: irq(319), chgin(0x3), chg_dtls(0x3) prev 0x3
<6>[    9.937711] max77804k_irq_thread: interrupt source(0x01)
<6>[    9.938241] max77804k_irq_thread: charger interrupt(0x40)
<6>[   10.555394] SELinux:  Context u:object_r:themeservice_app_data_file:s0 is not valid (left unmapped).
<6>[   10.588781] SELinux:  Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
<6>[   10.589801] SELinux:  Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
<6>[   10.591293] SELinux:  Context u:object_r:time_data_file:s0 is not valid (left unmapped).
<6>[   10.594207] SELinux:  Context u:object_r:vcs_data_file:s0 is not valid (left unmapped).
<6>[   10.595488] SELinux:  Context u:object_r:camera_socket:s0 is not valid (left unmapped).
<6>[   10.597580] SELinux:  Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
<6>[   10.597914] SELinux:  Context u:object_r:ota_package_file:s0 is not valid (left unmapped).
<6>[   10.599055] SELinux:  Context u:object_r:ringtone_file:s0 is not valid (left unmapped).
<6>[   10.605650] SELinux:  Context u:object_r:shortcut_manager_icons:s0 is not valid (left unmapped).
<3>[   10.784793] init: Warning!  Service qseecomd needs a SELinux domain defined; please fix!
<5>[   10.784907] init: Starting service 'qseecomd'...
<6>[   10.800711] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
<6>[   10.837191] SELinux:  Context u:object_r:cache_private_backup_file:s0 is not valid (left unmapped).
<6>[   10.849756] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts:
<7>[   10.849771] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
<6>[   10.854944] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   10.857082] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   10.857187] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   10.857192] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[   10.864728] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   10.865451] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   10.865550] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   10.865555] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[   11.146278] max77804k_chgin_isr_work: irq(319), chgin(0x3), chg_dtls(0x3) prev 0x3
<6>[   11.147775] max77804k_irq_thread: interrupt source(0x01)
<6>[   11.148293] max77804k_irq_thread: charger interrupt(0x40)
<6>[   11.149724] max77804k_irq_thread: interrupt source(0x00)
<6>[   11.781724] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   11.783667] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   11.783771] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   11.783776] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[   11.784728] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   11.786289] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   11.786389] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   11.786394] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[   11.786877] mdss_fb_set_backlight: [BL2] bkl_lvl (162), bl_updated(1)
<6>[   11.795271] usb: enabled: 0, dev->enabled: 1
<3>[   11.795281] dwc3 f9200000.dwc3: request e9a6e180 was not queued to ep0out
<6>[   11.795429] max77804k_get_input_current: CHG_CNFG_09(0x48)
<7>[   11.795434] usb: usb_remove_config cdev->config=  (null), config=e9417780
<6>[   11.795541] adb_release
<6>[   11.795985] max77804k_get_input_current: CHG_CNFG_09(0x48)
<6>[   11.797802] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[   11.797947] usb: enabled: 0, dev->enabled: 0
<6>[   11.798083] usb: enabled: 1, dev->enabled: 0
<7>[   11.798089] usb: enable_store f_holder->f:adb
<7>[   11.798095] usb: enable_store vendor=4e8,product=685e,bcdDevice=232
<7>[   11.798099] ,Class=0,SubClass=0,Protocol=0
<7>[   11.798102] usb: enable_store next cmd : usb_add_config
<6>[   11.798107] adb_bind_config
<6>[   11.806174] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
<7>[   11.806196] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
<6>[   11.819671] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(270), Temp-ADC(33628)
<6>[   11.820615] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   11.821544] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[   11.821550] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<6>[   11.821557] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4392mV),Inow(1800mA),Imax(1800mA),SOC(100%),Tbat(270),is_hc_usb(0)
<6>[   11.843473] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   11.844547] max77804k_get_health_state: bat_dtls(0x3) int_mask(0xda)
<6>[   11.846244] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[   11.846256] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(3), Vendor(SDI SDI), level(100%)
<3>[   11.848552] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   12.234650] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   12.234682] msm_thermal:msm_therm_temp_log (0 --- 45)(1 --- 42)(2 --- 40)(3 --- 40)(4 --- 43)(5 --- 47)(6 --- 54)(7 --- 44)(8 --- 44)(9 --- 41)(10 --- 39)
<6>[   14.006242] max77804k_chgin_isr_work: irq(319), chgin(0x3), chg_dtls(0x3) prev 0x3
<6>[   14.007754] max77804k_irq_thread: interrupt source(0x01)
<6>[   14.008289] max77804k_irq_thread: charger interrupt(0x40)
<6>[   14.044641] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   15.929013] max77804k_irq_thread: interrupt source(0x08)
<6>[   15.929775] max77804k_irq_thread: muic interrupt(0x00, 0x13, 0x00)
<6>[   15.929784] max77804k-muic max77804k-muic: max77804k_muic_irq: irq:324
<6>[   15.930324] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev CONTROL1:0
<6>[   15.930974] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev irq:324 ret:0
<6>[   15.930979] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: STATUS1:0x3f, 2:0x0
<6>[   15.930986] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x0, vbvolt:0 adc open prev:1
<6>[   15.930992] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: DETACHED
<6>[   15.932873] max77804k-muic max77804k-muic: max77804k_muic_handle_detach: CNTL2(0x33)
<6>[   15.932879] max77804k-muic max77804k-muic: state: cur=0x8, new=0x0, changed=0x8
<6>[   15.932885] extcon extcon-muic: extcon_set_cable_state: TA is detached
<6>[   15.932890] extcon extcon-muic: index = 3
<6>[   15.932895] extcon extcon-muic: state: 0x8, 0x0, mask: 0x8
<6>[   15.932899] extcon extcon-muic: state: 0x8 --> 0x0
<6>[   15.932905] extcon extcon-muic: _call_per_cable: TA is detached, calling 0xc05888a4
<6>[   15.932916] extcon extcon-muic: _call_per_cable: TA is detached, calling 0xc0771d54
<6>[   15.932923] sec-battery battery.98: batt_handle_notification: current_cable(1), wc_status(0), wire_status(1)
<6>[   15.932933] batt_handle_notification: CMD=DETACH, attached_dev=3
<6>[   15.932977] max77804k-muic max77804k-muic: set_muic_path: current state=0x0, path=OPEN
<6>[   15.932982] max77804k-muic max77804k-muic: set_muic_path: don't have to set path
<6>[   15.934647] sec_bat_check_cable_result_callback set ldo off
<4>[   15.934675] max77826_ldo6: Failed to create debugfs directory
<6>[   15.934682] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[   15.935595] max77804k-muic max77804k-muic: max77804k_muic_irq: irq:328
<6>[   15.936271] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev CONTROL1:0
<6>[   15.936793] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[   15.936801] sec-fuelgauge 19-0036: sec_fg_calculate_dynamic_scale: 1013 is used for capacity_max
<6>[   15.937078] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev irq:328 ret:0
<6>[   15.937084] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: STATUS1:0x3f, 2:0x0
<6>[   15.937091] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x0, vbvolt:0 adc open prev:1
<6>[   15.937095] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: DETACHED
<6>[   15.937791] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[   15.937797] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   15.938608] sec otg: TA is detached
<6>[   15.941014] max77804k_set_charge_current: reg_data(0x80), charge(0)
<6>[   15.941553] max77804k-muic max77804k-muic: max77804k_muic_handle_detach: CNTL2(0x33)
<6>[   15.941559] max77804k-muic max77804k-muic: state: cur=0x0, new=0x0, changed=0x0
<6>[   15.941563] max77804k-muic max77804k-muic: set_muic_path: current state=0x0, path=OPEN
<6>[   15.941568] max77804k-muic max77804k-muic: set_muic_path: don't have to set path
<6>[   15.943012] max77804k_irq_thread: interrupt source(0x00)
<6>[   15.945848] max77804k_set_input_current: reg_data(0x12), input(460)
<6>[   15.947744] max77804k_set_topoff_current: reg_data(0x00), topoff(0)
<6>[   15.948273] max77804k_irq_thread: interrupt source(0x01)
<6>[   15.948683] sec-battery battery.98: sec_bat_cable_work: Status:Discharging, Sleep:No, Charging:No, Short Poll:No
<6>[   15.948688] sec-battery battery.98: sec_bat_cable_work: Polling time is reset to 30 sec.
<6>[   15.949209] max77804k_irq_thread: charger interrupt(0x40)
<6>[   16.450671] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   16.451210] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   16.453052] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[   16.474923] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(270), Temp-ADC(33641)
<6>[   16.475854] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   16.476779] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[   16.476784] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   16.476790] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4326mV),Inow(450mA),Imax(1800mA),SOC(100%),Tbat(270),is_hc_usb(0)
<6>[   16.476797] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   16.476805] sec-battery battery.98: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
<6>[   17.086238] max77804k_chgin_isr_work: irq(319), chgin(0x0), chg_dtls(0x8) prev 0x0
<6>[   17.244650] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   17.244680] msm_thermal:msm_therm_temp_log (0 --- 41)(1 --- 40)(2 --- 39)(3 --- 39)(4 --- 40)(5 --- 42)(6 --- 42)(7 --- 41)(8 --- 41)(9 --- 40)(10 --- 38)
<6>[   18.296228] max77804k_chgin_isr_work: irq(319), chgin(0x0), chg_dtls(0x8) prev 0x0
<3>[   18.391031] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   22.254644] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   22.254675] msm_thermal:msm_therm_temp_log (0 --- 40)(1 --- 39)(2 --- 38)(3 --- 38)(4 --- 39)(5 --- 41)(6 --- 41)(7 --- 40)(8 --- 40)(9 --- 39)(10 --- 38)
<3>[   23.931714] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   25.044661] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   27.264648] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   27.264680] msm_thermal:msm_therm_temp_log (0 --- 40)(1 --- 39)(2 --- 38)(3 --- 38)(4 --- 39)(5 --- 40)(6 --- 40)(7 --- 40)(8 --- 40)(9 --- 39)(10 --- 37)
<6>[   31.333049] max77804k_irq_thread: interrupt source(0x01)
<6>[   31.333585] max77804k_irq_thread: charger interrupt(0x40)
<6>[   31.358132] max77804k_irq_thread: interrupt source(0x08)
<6>[   31.358894] max77804k_irq_thread: muic interrupt(0x00, 0x12, 0x00)
<6>[   31.361329] max77804k-muic max77804k-muic: max77804k_muic_irq: irq:328
<6>[   31.361868] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev CONTROL1:3f
<6>[   31.362518] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev irq:328 ret:0
<6>[   31.362523] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: STATUS1:0x3f, 2:0x48
<6>[   31.362530] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x0, vbvolt:64 adc open prev:1
<6>[   31.362536] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: DETACHED
<6>[   31.364417] max77804k-muic max77804k-muic: max77804k_muic_handle_detach: CNTL2(0x33)
<6>[   31.364422] max77804k-muic max77804k-muic: state: cur=0x0, new=0x0, changed=0x0
<6>[   31.364428] max77804k-muic max77804k-muic: set_muic_path: current state=0x0, path=OPEN
<6>[   31.364433] max77804k-muic max77804k-muic: set_muic_path: don't have to set path
<6>[   31.539943] max77804k_irq_thread: interrupt source(0x08)
<6>[   31.540704] max77804k_irq_thread: muic interrupt(0x00, 0x03, 0x00)
<6>[   31.540712] max77804k-muic max77804k-muic: max77804k_muic_irq: irq:324
<6>[   31.541250] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev CONTROL1:9
<6>[   31.541900] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev irq:324 ret:0
<6>[   31.541905] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: STATUS1:0x3f, 2:0x42
<6>[   31.541911] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x2, vbvolt:64 adc open prev:1
<6>[   31.541916] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: ATTACHED/CHANGED
<6>[   31.541921] max77804k-muic max77804k-muic: max77804k_muic_handle_attach:
<6>[   31.541925] max77804k-muic max77804k-muic: st1:0x3f st2:0x42
<6>[   31.541930] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x2, vbvolt:64
<6>[   31.541934] max77804k-muic max77804k-muic: chgdetrun:0x0, prev state:0x0
<6>[   31.541939] max77804k-muic max77804k-muic: state: cur=0x0, new=0x40, changed=0x40
<6>[   31.541946] extcon extcon-muic: extcon_set_cable_state: Charge-downstream is attached
<6>[   31.541951] extcon extcon-muic: index = 6
<6>[   31.541956] extcon extcon-muic: state: 0x0, 0x40, mask: 0x40
<6>[   31.541960] extcon extcon-muic: state: 0x0 --> 0x40
<6>[   31.541967] extcon extcon-muic: _call_per_cable: Charge-downstream is attached, calling 0xc05888a4
<6>[   31.541978] extcon extcon-muic: _call_per_cable: Charge-downstream is attached, calling 0xc0771d54
<6>[   31.541984] sec-battery battery.98: batt_handle_notification: current_cable(6), wc_status(0), wire_status(6)
<6>[   31.541995] batt_handle_notification: CMD=ATTACH, attached_dev=6
<6>[   31.542041] max77804k-muic max77804k-muic: set_muic_path: current state=0x40, path=OPEN
<6>[   31.542046] max77804k-muic max77804k-muic: set_muic_path: don't have to set path
<6>[   31.542081] sec_bat_check_cable_result_callback set ldo on
<4>[   31.542111] max77826_ldo6: Failed to create debugfs directory
<6>[   31.542117] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[   31.542691] max77804k-muic max77804k-muic: max77804k_muic_uart_uevent: state:0
<6>[   31.542771] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[   31.544083] sec otg: Charge-downstream is attached
<6>[   31.544723] sec_usb_work klte_usb_rdrv_pin = 312, enable=1
<6>[   31.544728] usb: dwc3 power supply set(1)
<6>[   31.545156] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: !mdwc->ext_inuse(1), mdwc->ext_xceiv.otg_capability(1), !init(1)
<6>[   31.545163] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: queue_delayed_work mdwc->resume_work
<6>[   31.547045] max77804k_set_charge_current: reg_data(0x99), charge(1000)
<6>[   31.605172] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   31.664655] msm-dwc3 msm_dwc3: dwc3_resume_work
<6>[   31.664661] msm-dwc3 msm_dwc3: dwc3_resume_work: pm_runtime_get_sync entered
<6>[   31.665232] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   31.671539] msm-dwc3 msm_dwc3: DWC3 exited from low power mode
<6>[   31.725163] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   31.785150] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   31.845153] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<4>[   31.896025] dwc3 f9200000.dwc3: dwc3_gadget_restart: unsupported device speed
<6>[   31.896105] dwc3 f9200000.dwc3: gadget android_usb data soft-connect
<6>[   31.905149] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   31.965159] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.002395] android_work: android_work: did not send uevent (0 0   (null))
<6>[   32.025150] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.085159] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.108401] usb:: dwc3_gadget_reset_interrupt
<6>[   32.119414] usb:: dwc3_gadget_conndone_interrupt (HS)
<3>[   32.119427] usb: Super speed host not available
<6>[   32.119544] android_work: android_work: did not send uevent (0 0   (null))
<6>[   32.145160] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<7>[   32.146341] usb: GET_DES
<6>[   32.146420] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[   32.150056] usb:: dwc3_gadget_reset_interrupt
<7>[   32.150064] usb: composite_disconnect
<6>[   32.153809] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
<6>[   32.157565] usb:: dwc3_gadget_conndone_interrupt (HS)
<6>[   32.205161] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<7>[   32.229331] usb: GET_DES
<6>[   32.229405] android_work: android_work: sent uevent USB_STATE=CONNECTED
<7>[   32.229601] usb: set_config_number single config num=0
<7>[   32.229607] usb: set_interface_count next_interface_id=1
<6>[   32.265160] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.274634] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   32.274664] msm_thermal:msm_therm_temp_log (0 --- 40)(1 --- 39)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 40)(6 --- 40)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 37)
<6>[   32.325150] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.385159] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.445156] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<7>[   32.479482] usb: GET_DES
<7>[   32.480005] usb: set_config_number single config num=0
<7>[   32.480010] usb: set_interface_count next_interface_id=1
<7>[   32.480257] usb: set_config_number single config num=0
<7>[   32.480261] usb: set_interface_count next_interface_id=1
<6>[   32.480564] android_usb gadget: high-speed config #1: fe8050c8.android_usb
<7>[   32.480597] usb: SET_CON
<7>[   32.480600] usb: set_config_number single config num=0
<6>[   32.505159] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.534651] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[   32.546181] max77804k_chgin_isr_work: irq(319), chgin(0x3), chg_dtls(0x2) prev 0x3
<6>[   32.565160] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.625159] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.685158] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.745158] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.805159] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   32.805164] max77804k_set_input_current: reg_data(0x28), input(1000)
<6>[   32.807001] max77804k_set_topoff_current: reg_data(0x24), topoff(200)
<6>[   32.807406] sec-battery battery.98: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
<6>[   32.807412] sec-battery battery.98: sec_bat_cable_work: Polling time is reset to 30 sec.
<6>[   33.310594] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   33.311123] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   33.312938] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[   33.334762] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(270), Temp-ADC(33628)
<6>[   33.335678] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   33.336589] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[   33.336595] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (100.8)
<6>[   33.336602] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4392mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(270),is_hc_usb(0)
<6>[   33.358413] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   33.359461] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   33.361030] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x2
<6>[   33.361037] sec-battery battery.98: sec_bat_time_management: Charging Time : 2 secs
<6>[   33.361044] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[   33.361572] max77804k_get_charger_state: CHG_DTLS : 0x 2
<6>[   33.361577] sec-battery battery.98: sec_bat_fullcharged_check: Charging Mode : Normal
<6>[   33.361583] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[   36.044706] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<3>[   36.481716] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   37.284639] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   37.284670] msm_thermal:msm_therm_temp_log (0 --- 40)(1 --- 39)(2 --- 37)(3 --- 38)(4 --- 39)(5 --- 41)(6 --- 41)(7 --- 40)(8 --- 40)(9 --- 39)(10 --- 37)
<6>[   42.294660] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   42.294688] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 39)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 40)(6 --- 40)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 37)
<6>[   44.777730] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   44.778260] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   44.780078] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[   44.801912] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(271), Temp-ADC(33623)
<6>[   44.802830] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   44.803741] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[   44.803747] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (100.8)
<6>[   44.803754] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4391mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(271),is_hc_usb(0)
<6>[   44.825567] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   44.826615] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   44.828185] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[   44.828193] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[   47.044298] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   47.304437] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   47.304467] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 40)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[   52.314695] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   52.314724] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[   56.244322] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   56.244899] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   56.246714] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[   56.268528] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(270), Temp-ADC(33625)
<6>[   56.269444] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   56.270355] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[   56.270360] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (100.8)
<6>[   56.270366] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4392mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(270),is_hc_usb(0)
<6>[   56.292188] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   56.293235] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   56.294822] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[   56.294828] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[   57.324760] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   57.324790] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[   58.044780] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   62.334675] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   62.334703] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<3>[   64.047832] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   67.344768] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   67.344799] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 40)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[   67.710934] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   67.711463] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   67.713282] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[   67.735104] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(270), Temp-ADC(33626)
<6>[   67.736021] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   67.736932] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[   67.736938] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (100.8)
<6>[   67.736945] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4393mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(270),is_hc_usb(0)
<6>[   67.758756] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   67.759804] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   67.761374] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[   67.761381] sec-battery battery.98: sec_bat_time_management: Charging Time : 36 secs
<6>[   67.761388] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[   67.761916] max77804k_get_charger_state: CHG_DTLS : 0x 3
<6>[   67.761921] sec-battery battery.98: sec_bat_check_fullcharged: Full Check Charger (1)
<6>[   67.764272] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[   67.764278] sec-fuelgauge 19-0036: sec_fg_calculate_dynamic_scale: 1011 is used for capacity_max
<6>[   67.764286] sec-battery battery.98: sec_bat_fullcharged_check: Charging Mode : Additional
<6>[   67.764293] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[   69.044659] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   71.559883] mdss_fb_set_backlight: [BL2] bkl_lvl (5), bl_updated(1)
<6>[   71.559895] [LCD]make_brightcontrol_set:bright_level: 5, candela_idx: 3( 6 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[   71.563714] mipi_samsung_disp_send_cmd done..
<6>[   72.354671] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   72.354700] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<3>[   73.597843] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   73.601342] mdss_fb_set_backlight: [BL2] bkl_lvl (0), bl_updated(1)
<6>[   73.601354] [LCD]make_brightcontrol_set:bright_level: 0, candela_idx: 0( 2 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[   73.620006] mipi_samsung_disp_send_cmd done..
<6>[   73.620076] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK ++
<6>[   73.620082] mdss_fb_set_backlight: [BL2] bkl_lvl (0), bl_updated(1)
<6>[   73.706392] mdss_dsi_panel_off : ++
<6>[   73.706395] mdss_dsi_panel_off: ctrl=e9f30010 ndx=0
<6>[   73.706398] DISPLAY_OFF
<6>[   73.840020] mipi_samsung_disp_send_cmd done..
<6>[   73.840023] mdss_dsi_panel_off : --
<6>[   73.840028] mdss_dsi_off+: ctrl=e9f30010 ndx=0
<6>[   73.841770] mdss_dsi_panel_power_on: enable=0 vregn(3)
<6>[   73.841774] mdss_dsi_panel_reset: enable(0) ndx(0)
<6>[   73.841791] mdss_dsi_extra_power: ++ enable(0) ndx(0)
<6>[   73.846826] mdss_dsi_extra_power lvs4(VDD3) diable
<6>[   73.855324] mdss_dsi_off-:
<3>[   73.856160] samsung_dsi_panel_event_handler : unknown event (7)
<6>[   73.856200] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK --
<6>[   76.208234] synaptics_rmi4_i2c 2-0020: Spontaneous reset detected
<6>[   76.208240] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_free_fingers
<6>[   76.208398] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_set_feature: 0x0
<6>[   76.208794] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_reinit_device: Hsync [NG[0x24]]
<6>[   76.208919] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_reinit_device: Interrupt enable mask 0 = 0x64
<6>[   77.364661] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   77.364692] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[   77.770599] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   77.771124] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   77.772938] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[   77.794781] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(270), Temp-ADC(33631)
<6>[   77.795696] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   77.796605] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10227), data(0x0000)
<6>[   77.796611] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   77.796618] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4392mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(270),is_hc_usb(0)
<6>[   77.818450] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   77.819490] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   77.821050] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[   77.821057] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[   80.044485] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   82.374648] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   82.374678] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[   87.384441] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   87.384470] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[   88.227461] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   88.227986] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   88.229797] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[   88.251612] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(270), Temp-ADC(33638)
<6>[   88.252527] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   88.253437] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[   88.253442] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<6>[   88.253448] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4392mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(270),is_hc_usb(0)
<6>[   88.275260] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   88.276300] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   88.277859] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[   88.277865] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[   91.044689] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   92.394715] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   92.394744] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 38)(9 --- 38)(10 --- 36)
<6>[   92.893695] qpnp_pon_input_dispatch: PWR key is pressed
<3>[   92.893717] sec_debug_check_crash_key code 116 value 1 state 0 enable 0
<0>[   92.893773] (sec_debug_set_upload_cause) type = 0x85
<6>[   92.893925] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[   92.893929] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<3>[   92.893936] samsung_dsi_panel_event_handler : unknown event (8)
<3>[   92.897526] samsung_dsi_panel_event_handler : unknown event (1)
<6>[   92.897534] mdss_mdp_cmd_tearcheck_cfg: te->tear_check_en = 1, res=1920 vclks=a5 height=65520 init=1920 rd=1921 start=1920
<6>[   92.897538] thrd_start =4 thrd_cont=4
<6>[   92.898333] mdss_dsi_on+: ctrl=e9f30010 ndx=0
<6>[   92.898337] mdss_dsi_on: success [disp_te_gpio] gpio_ltmm_config..
<6>[   92.898340] mdss_dsi_panel_power_on: enable=1 vregn(3)
<6>[   92.900543] mdss_dsi_extra_power: ++ enable(1) ndx(0)
<6>[   92.900546] mdss_dsi_extra_power: lvs4(VDD3) enable.
<6>[   92.915425] mdss_dsi_host_init: Broadcast mode (0).
<6>[   92.944570] mdss_dsi_panel_reset: enable(1) ndx(0)
<6>[   92.961692] mdss_dsi_on-:
<6>[   92.961700] mdss_dsi_panel_on : ++
<6>[   92.961702] mdss_dsi_panel_on: ctrl=e9f30010 ndx=0
<6>[   92.990897] mipi_samsung_disp_send_cmd done..
<6>[   93.095177] mipi_samsung_disp_send_cmd done..
<6>[   93.098849] mipi_samsung_disp_send_cmd done..
<6>[   93.098858] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[   93.098862] mipi_samsung_disp_send_cmd : panel is off state!!
<6>[   93.098865] [LCD]mipi_samsung_disp_send_cmd:Undefined command
<6>[   93.098871] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[   93.102998] mipi_samsung_disp_send_cmd done..
<3>[   93.103001] [mdnie lite] is negative Mode On = 0
<6>[   93.107048] qpnp_pon_input_dispatch: PWR key is released
<3>[   93.107061] sec_debug_check_crash_key code 116 value 0 state 0 enable 0
<0>[   93.107065] (sec_debug_set_upload_cause) type = 0xcafebabe
<3>[   93.107094] [mdnie lite] mDNIe_Set_Mode end , UI_MODE(0), AUTO(4), OUTDOOR_OFF_MODE(0), ACCESSIBILITY_OFF(0)
<6>[   93.107098] mdss_dsi_panel_on : --
<6>[   93.134197] mipi_samsung_disp_send_cmd done..
<6>[   93.134279] mipi_samsung_disp_send_cmd done..
<6>[   93.134590] read_reg : A[1] : 9c .
<6>[   93.134684] mipi_samsung_disp_send_cmd done..
<6>[   93.134688] DISPLAY_ON
<6>[   93.134693] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[   93.134696] mdss_fb_set_backlight: [BL2] bkl_lvl (0), bl_updated(1)
<6>[   93.134701] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<6>[   93.135241] mdss_fb_set_backlight: [BL2] bkl_lvl (162), bl_updated(1)
<6>[   93.135250] [LCD]make_brightcontrol_set:bright_level: 162, candela_idx: 51( 220 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[   93.135746] mipi_samsung_disp_send_cmd done..
<3>[   93.208437] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   94.313758] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 215, y = 1657, wx = 6, wy = 6 |[1]
<3>[   94.389600] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   94.467556] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   94.543101] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   94.618756] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   94.687148] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[33], Ver[A355][0/14]
<3>[   94.695426] samsung_dsi_panel_event_handler : unknown event (9)
<7>[   94.695859] tspdrv: Enable time = 80 msec
<6>[   94.695877] tspdrv: ENABLE
<7>[   94.696183] haptic power_on is finished.
<7>[   94.696190] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[   94.728274] samsung_dsi_panel_event_handler : unknown event (9)
<7>[   94.776241] haptic power_off is finished.
<7>[   94.776249] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[   95.556305] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 307, y = 1221, wx = 6, wy = 6 |[1]
<7>[   95.556471] tspdrv: Enable time = 80 msec
<6>[   95.556484] tspdrv: ENABLE
<7>[   95.556741] haptic power_on is finished.
<7>[   95.556747] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[   95.592818] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   95.621998] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[5], Ver[A355][0/14]
<7>[   95.636873] haptic power_off is finished.
<7>[   95.636881] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<3>[   95.648349] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   95.686626] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   97.404645] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   97.404677] msm_thermal:msm_therm_temp_log (0 --- 40)(1 --- 39)(2 --- 37)(3 --- 38)(4 --- 39)(5 --- 40)(6 --- 40)(7 --- 39)(8 --- 40)(9 --- 38)(10 --- 36)
<6>[   99.694330] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   99.694896] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   99.696713] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[   99.718535] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(270), Temp-ADC(33641)
<6>[   99.719451] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   99.720361] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[   99.720367] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<6>[   99.720374] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4392mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(270),is_hc_usb(0)
<6>[   99.742185] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   99.743226] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   99.744809] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[   99.744817] sec-battery battery.98: sec_bat_time_management: Charging Time : 68 secs
<6>[   99.744823] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[   99.744830] sec-battery battery.98: sec_bat_fullcharged_check: Charging Mode : Additional
<6>[   99.744836] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  102.044654] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[  102.414652] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  102.414682] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[  107.424673] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  107.424703] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[  110.020868] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  110.021393] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  110.023204] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[  110.045020] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(269), Temp-ADC(33649)
<6>[  110.045935] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  110.046844] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[  110.046850] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<6>[  110.046855] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4392mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(269),is_hc_usb(0)
<6>[  110.068665] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  110.069705] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  110.071264] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  110.071270] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  112.434638] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  112.434667] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[  113.044719] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[  117.445055] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  117.445084] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 38)(9 --- 37)(10 --- 36)
<6>[  121.488023] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  121.488548] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  121.490360] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[  121.512173] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(269), Temp-ADC(33656)
<6>[  121.513088] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  121.513998] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[  121.514004] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<6>[  121.514010] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4393mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(269),is_hc_usb(0)
<6>[  121.535821] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  121.536861] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  121.538419] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  121.538425] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  122.454654] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  122.454686] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 38)(9 --- 37)(10 --- 36)
<6>[  124.044590] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<3>[  124.254377] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  127.464643] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  127.464675] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[  131.784006] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  131.784532] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  131.786392] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[  131.808214] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(269), Temp-ADC(33663)
<6>[  131.809131] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  131.810042] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[  131.810048] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<6>[  131.810054] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4392mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(269),is_hc_usb(0)
<6>[  131.831865] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  131.832907] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  131.834467] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  131.834475] sec-battery battery.98: sec_bat_time_management: Charging Time : 100 secs
<6>[  131.834481] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[  131.834488] sec-battery battery.98: sec_bat_fullcharged_check: Charging Mode : Additional
<6>[  131.834494] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  132.474764] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  132.474794] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 38)(9 --- 38)(10 --- 36)
<6>[  135.044773] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[  137.484634] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  137.484664] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 36)
<6>[  142.020958] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  142.021483] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  142.023295] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[  142.045110] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(268), Temp-ADC(33668)
<6>[  142.046025] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  142.046935] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[  142.046941] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<6>[  142.046946] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4391mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(268),is_hc_usb(0)
<6>[  142.068755] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  142.069796] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  142.071354] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  142.071360] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  142.494678] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  142.494708] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 36)
<6>[  146.044633] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[  147.485624] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 84, y = 934, wx = 6, wy = 6 |[1]
<6>[  147.504528] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  147.504558] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 36)
<3>[  147.542837] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  147.562421] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[6], Ver[A355][0/14]
<3>[  147.575162] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  147.575728] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[  147.578324] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[  147.578425] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[  147.578430] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[  147.578589] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[  147.580947] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[  147.581047] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[  147.581051] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<7>[  147.581248] tspdrv: Enable time = 80 msec
<6>[  147.581263] tspdrv: ENABLE
<7>[  147.581523] haptic power_on is finished.
<7>[  147.581530] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[  147.609017] samsung_dsi_panel_event_handler : unknown event (9)
<7>[  147.661641] haptic power_off is finished.
<7>[  147.661649] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[  149.658345] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 270, y = 1679, wx = 7, wy = 4 |[1]
<7>[  149.658863] tspdrv: Enable time = 80 msec
<6>[  149.658874] tspdrv: ENABLE
<7>[  149.659182] haptic power_on is finished.
<7>[  149.659189] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[  149.713015] samsung_dsi_panel_event_handler : unknown event (9)
<7>[  149.739252] haptic power_off is finished.
<7>[  149.739260] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[  149.756872] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[8], Ver[A355][0/14]
<3>[  149.851546] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  149.951400] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  151.010995] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 71, y = 768, wx = 6, wy = 6 |[1]
<6>[  151.109453] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[8], Ver[A355][0/14]
<6>[  151.560689] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 135, y = 752, wx = 7, wy = 7 |[1]
<3>[  151.658897] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  151.681275] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[10], Ver[A355][0/14]
<6>[  151.681577] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[  151.684169] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[  151.684226] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[  151.684231] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[  151.684429] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[  151.686785] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[  151.686886] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[  151.686891] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<7>[  151.687087] tspdrv: Enable time = 80 msec
<6>[  151.687099] tspdrv: ENABLE
<7>[  151.687359] haptic power_on is finished.
<7>[  151.687366] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<7>[  151.767456] haptic power_off is finished.
<7>[  151.767464] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<3>[  151.793406] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  152.180638] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  152.181169] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  152.182995] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[  152.204831] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(269), Temp-ADC(33664)
<6>[  152.205768] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  152.206701] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10240), data(0x0000)
<6>[  152.206707] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.2)
<6>[  152.206713] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4392mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(269),is_hc_usb(0)
<6>[  152.228535] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  152.229596] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  152.231182] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  152.231189] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  152.514642] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  152.514674] msm_thermal:msm_therm_temp_log (0 --- 41)(1 --- 39)(2 --- 37)(3 --- 38)(4 --- 39)(5 --- 42)(6 --- 41)(7 --- 40)(8 --- 40)(9 --- 39)(10 --- 36)
<6>[  152.748699] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 849, y = 1181, wx = 7, wy = 6 |[1]
<7>[  152.748838] tspdrv: Enable time = 80 msec
<6>[  152.748851] tspdrv: ENABLE
<7>[  152.749344] haptic power_on is finished.
<7>[  152.749351] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<6>[  152.825223] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[6], Ver[A355][0/14]
<7>[  152.829237] haptic power_off is finished.
<7>[  152.829244] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<3>[  152.848140] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  152.871873] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  152.909186] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  157.044734] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[  157.524653] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  157.524685] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 40)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)