API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 29th, 2023
36
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 33.96 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. [ 0.000000] Linux version 5.15.108 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.2.0 r22658-2c530fcb97) 12.2.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Thu Apr 27 20:26:58 2023
  3. [ 0.000000] Machine model: Dynalink DL-WRX36
  4. [ 0.000000] Zone ranges:
  5. [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
  6. [ 0.000000] DMA32 empty
  7. [ 0.000000] Normal empty
  8. [ 0.000000] Movable zone start for each node
  9. [ 0.000000] Early memory node ranges
  10. [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
  11. [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
  12. [ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff]
  13. [ 0.000000] node 0: [mem 0x0000000051100000-0x000000007fffffff]
  14. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
  15. [ 0.000000] psci: probing for conduit method from DT.
  16. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  17. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  18. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  19. [ 0.000000] psci: SMC Calling Convention v1.0
  20. [ 0.000000] percpu: Embedded 17 pages/cpu s30808 r8192 d30632 u69632
  21. [ 0.000000] pcpu-alloc: s30808 r8192 d30632 u69632 alloc=17*4096
  22. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  23. [ 0.000000] Detected VIPT I-cache on CPU0
  24. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
  25. [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1
  26. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  27. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  28. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  29. [ 0.000000] Memory: 887744K/1048576K available (7808K kernel code, 860K rwdata, 2136K rodata, 1280K init, 289K bss, 160832K reserved, 0K cma-reserved)
  30. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  31. [ 0.000000] rcu: Hierarchical RCU implementation.
  32. [ 0.000000] Tracing variant of Tasks RCU enabled.
  33. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  34. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  35. [ 0.000000] Root IRQ handler: gic_handle_irq
  36. [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
  37. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  38. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  39. [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  40. [ 0.000125] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  41. [ 0.000141] pid_max: default: 32768 minimum: 301
  42. [ 0.000291] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  43. [ 0.000309] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  44. [ 0.001912] rcu: Hierarchical SRCU implementation.
  45. [ 0.002091] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
  46. [ 0.002646] smp: Bringing up secondary CPUs ...
  47. [ 0.003237] Detected VIPT I-cache on CPU1
  48. [ 0.003300] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  49. [ 0.003916] Detected VIPT I-cache on CPU2
  50. [ 0.003958] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  51. [ 0.004539] Detected VIPT I-cache on CPU3
  52. [ 0.004576] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  53. [ 0.004643] smp: Brought up 1 node, 4 CPUs
  54. [ 0.004670] SMP: Total of 4 processors activated.
  55. [ 0.004677] CPU features: detected: 32-bit EL0 Support
  56. [ 0.004685] CPU features: detected: CRC32 instructions
  57. [ 0.004738] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  58. [ 0.004748] CPU: All CPU(s) started at EL1
  59. [ 0.004769] alternatives: patching kernel code
  60. [ 0.012744] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  61. [ 0.012779] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  62. [ 0.012924] pinctrl core: initialized pinctrl subsystem
  63. [ 0.014174] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  64. [ 0.014636] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  65. [ 0.014682] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  66. [ 0.014719] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  67. [ 0.015049] thermal_sys: Registered thermal governor 'step_wise'
  68. [ 0.016547] cpuidle: using governor menu
  69. [ 0.016774] ASID allocator initialised with 65536 entries
  70. [ 0.042475] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
  71. [ 0.051300] SCSI subsystem initialized
  72. [ 0.051476] usbcore: registered new interface driver usbfs
  73. [ 0.051520] usbcore: registered new interface driver hub
  74. [ 0.051556] usbcore: registered new device driver usb
  75. [ 0.051945] qcom_scm: convention: smc arm 64
  76. [ 0.053295] clocksource: Switched to clocksource arch_sys_counter
  77. [ 0.053999] NET: Registered PF_INET protocol family
  78. [ 0.054134] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  79. [ 0.055035] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
  80. [ 0.055066] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  81. [ 0.055081] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
  82. [ 0.055171] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
  83. [ 0.055320] TCP: Hash tables configured (established 8192 bind 8192)
  84. [ 0.055407] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  85. [ 0.055448] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  86. [ 0.055616] NET: Registered PF_UNIX/PF_LOCAL protocol family
  87. [ 0.055649] PCI: CLS 0 bytes, default 64
  88. [ 0.056660] workingset: timestamp_bits=46 max_order=18 bucket_order=0
  89. [ 0.060576] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  90. [ 0.060593] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  91. [ 0.061403] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  92. [ 0.062444] qcom-qmp-phy 78000.phy: supply vdda-phy not found, using dummy regulator
  93. [ 0.062584] qcom-qmp-phy 78000.phy: supply vdda-pll not found, using dummy regulator
  94. [ 0.063072] qcom-qmp-phy 78000.phy: Registered Qcom-QMP phy
  95. [ 0.063922] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
  96. [ 0.064046] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
  97. [ 0.064198] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
  98. [ 0.066849] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt
  99. [ 0.066874] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt
  100. [ 0.070545] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  101. [ 0.072269] msm_serial 78b3000.serial: msm_serial: detected port #0
  102. [ 0.072315] msm_serial 78b3000.serial: uartclk = 3686400
  103. [ 0.072362] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM
  104. [ 0.072394] msm_serial: console setup on port #0
  105. [ 0.709450] printk: console [ttyMSM0] enabled
  106. [ 0.714570] msm_serial: driver initialized
  107. [ 0.722378] loop: module loaded
  108. [ 0.722454] Loading iSCSI transport class v2.0-870.
  109. [ 0.727305] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xaa
  110. [ 0.730269] nand: Micron MT29F2G08ABBGAH4
  111. [ 0.736879] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
  112. [ 0.741562] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
  113. [ 0.751188] s1: supplied by regulator-dummy
  114. [ 0.754387] s2: supplied by regulator-dummy
  115. [ 0.758281] vdd_s3: supplied by regulator-dummy
  116. [ 0.762580] vdd_s4: supplied by regulator-dummy
  117. [ 0.767136] s5: supplied by regulator-dummy
  118. [ 0.771485] l1: supplied by regulator-dummy
  119. [ 0.775676] l2: supplied by regulator-dummy
  120. [ 0.779813] l3: supplied by regulator-dummy
  121. [ 0.784003] l4: supplied by regulator-dummy
  122. [ 0.788161] l5: supplied by regulator-dummy
  123. [ 0.792315] l6: supplied by regulator-dummy
  124. [ 0.796495] l7: supplied by regulator-dummy
  125. [ 0.800664] l8: supplied by regulator-dummy
  126. [ 0.804831] l9: supplied by regulator-dummy
  127. [ 0.809088] l11: supplied by regulator-dummy
  128. [ 0.813164] l12: supplied by regulator-dummy
  129. [ 0.817686] l13: supplied by regulator-dummy
  130. [ 0.836519] i2c_dev: i2c /dev entries driver
  131. [ 0.840494] sdhci: Secure Digital Host Controller Interface driver
  132. [ 0.840537] sdhci: Copyright(c) Pierre Ossman
  133. [ 0.845894] sdhci-pltfm: SDHCI platform and OF driver helper
  134. [ 0.853615] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
  135. [ 0.858334] NET: Registered PF_INET6 protocol family
  136. [ 0.862498] Segment Routing with IPv6
  137. [ 0.866917] In-situ OAM (IOAM) with IPv6
  138. [ 0.870469] NET: Registered PF_PACKET protocol family
  139. [ 0.874467] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  140. [ 0.879371] 8021q: 802.1Q VLAN Support v1.8
  141. [ 0.907874] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
  142. [ 0.908172] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
  143. [ 0.914029] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
  144. [ 0.920599] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
  145. [ 0.928309] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
  146. [ 0.935775] cpr3_mem_acc_init: apc: not using memory accelerator regulator
  147. [ 0.944913] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
  148. [ 0.951852] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 808000 uV
  149. [ 0.961843] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 872000 uV
  150. [ 0.971651] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 960000 uV
  151. [ 0.981510] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 701, quot_offset[ 7]= 0
  152. [ 0.991273] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 905, quot_offset[ 7]= 200
  153. [ 1.002123] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1017, quot_offset[ 7]= 110
  154. [ 1.013060] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1181, quot_offset[ 7]= 160
  155. [ 1.024128] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
  156. [ 1.026382] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xaa
  157. [ 1.041690] nand: Micron MT29F2G08ABBGAH4
  158. [ 1.048115] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
  159. [ 1.052358] 25 qcomsmem partitions found on MTD device qcom_nand.0
  160. [ 1.059504] Creating 25 MTD partitions on "qcom_nand.0":
  161. [ 1.065786] 0x000000000000-0x000000100000 : "0:sbl1"
  162. [ 1.072473] 0x000000100000-0x000000200000 : "0:mibib"
  163. [ 1.077343] 0x000000200000-0x000000280000 : "0:bootconfig"
  164. [ 1.081864] 0x000000280000-0x000000300000 : "0:bootconfig1"
  165. [ 1.087337] 0x000000600000-0x000000900000 : "0:qsee"
  166. [ 1.094622] 0x000000300000-0x000000600000 : "0:qsee_1"
  167. [ 1.099795] 0x000000980000-0x000000a00000 : "0:devcfg"
  168. [ 1.102866] 0x000000900000-0x000000980000 : "0:devcfg_1"
  169. [ 1.108059] 0x000000a00000-0x000000a80000 : "0:apdp"
  170. [ 1.113521] 0x000000a80000-0x000000b00000 : "0:apdp_1"
  171. [ 1.118452] 0x000000b80000-0x000000c00000 : "0:rpm"
  172. [ 1.123380] 0x000000b00000-0x000000b80000 : "0:rpm_1"
  173. [ 1.128147] 0x000000c80000-0x000000d00000 : "0:cdt"
  174. [ 1.133372] 0x000000c00000-0x000000c80000 : "0:cdt_1"
  175. [ 1.138076] 0x000000d00000-0x000000d80000 : "0:appsblenv"
  176. [ 1.143252] 0x000000e80000-0x000000f80000 : "0:appsbl"
  177. [ 1.149048] 0x000000d80000-0x000000e80000 : "0:appsbl_1"
  178. [ 1.154069] 0x000000f80000-0x000001000000 : "0:art"
  179. [ 1.159145] 0x000001000000-0x000007100000 : "rootfs"
  180. [ 1.237832] mtd: setting mtd18 (rootfs) as root device
  181. [ 1.238125] mtdsplit: no squashfs found in "rootfs"
  182. [ 1.241898] 0x00000db00000-0x00000e400000 : "0:wififw"
  183. [ 1.254006] 0x000007a00000-0x00000db00000 : "rootfs_1"
  184. [ 1.328742] 0x000007100000-0x000007a00000 : "0:wififw_1"
  185. [ 1.336095] 0x00000e400000-0x00000fa00000 : "ubifs"
  186. [ 1.353459] 0x00000fa00000-0x00000fa80000 : "0:ethphyfw"
  187. [ 1.354288] 0x00000fa80000-0x00000fd00000 : "certificate"
  188. [ 1.368564] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz
  189. [ 1.369665] remoteproc remoteproc0: cd00000.q6v5_wcss is available
  190. [ 1.378616] ubi0: attaching mtd18
  191. [ 1.810257] ubi0: scanning is finished
  192. [ 1.816380] ubi0: attached mtd18 (name "rootfs", size 97 MiB)
  193. [ 1.816415] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  194. [ 1.821109] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  195. [ 1.827895] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  196. [ 1.834744] ubi0: good PEBs: 776, bad PEBs: 0, corrupted PEBs: 0
  197. [ 1.841507] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
  198. [ 1.847767] ubi0: max/mean erase counter: 7/4, WL threshold: 4096, image sequence number: 1902851357
  199. [ 1.854805] ubi0: available PEBs: 0, total reserved PEBs: 776, PEBs reserved for bad PEB handling: 40
  200. [ 1.864093] ubi0: background thread "ubi_bgt0d" started, PID 505
  201. [ 1.864779] block ubiblock0_1: created from ubi0:1(rootfs)
  202. [ 1.882834] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  203. [ 1.883297] Freeing unused kernel memory: 1280K
  204. [ 1.923476] Run /sbin/init as init process
  205. [ 1.923495] with arguments:
  206. [ 1.923497] /sbin/init
  207. [ 1.923499] with environment:
  208. [ 1.923501] HOME=/
  209. [ 1.923503] TERM=linux
  210. [ 2.113937] init: Console is alive
  211. [ 2.114054] init: - watchdog -
  212. [ 2.453310] random: crng init done
  213. [ 2.572450] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  214. [ 2.720164] ssdk_switch_device_num_init[1335]:INFO:ess-switch dts node number: 1
  215. [ 2.720257] ssdk_dt_get_switch_node[1124]:INFO:ess-switch DT exist!
  216. [ 2.726665] ssdk_dt_parse_access_mode[999]:INFO:switch_access_mode: local bus
  217. [ 2.732624] ssdk_dt_parse_access_mode[1012]:INFO:switchreg_base_addr: 0x3a000000
  218. [ 2.739919] ssdk_dt_parse_access_mode[1013]:INFO:switchreg_size: 0x1000000
  219. [ 2.747384] ssdk_dt_parse_mac_mode[327]:INFO:mac mode = 0xb
  220. [ 2.754065] ssdk_dt_parse_mac_mode[336]:INFO:mac mode1 = 0xff
  221. [ 2.759530] ssdk_dt_parse_mac_mode[345]:INFO:mac mode2 = 0xc
  222. [ 2.765449] ssdk_dt_parse_phy_info[716]:INFO:[PORT 6] port_mac_sel = QGMAC_PORT
  223. [ 2.771194] ssdk_dt_parse_uniphy[364]:INFO:ess-uniphy DT exist!
  224. [ 2.778292] ssdk_dt_parse_intf_mac[942]:INFO:dp1 MAC a4:97:33:df:a5:df
  225. [ 2.784131] ssdk_dt_parse_intf_mac[942]:INFO:dp2 MAC a4:97:33:df:a5:df
  226. [ 2.790722] ssdk_dt_parse_intf_mac[942]:INFO:dp3 MAC a4:97:33:df:a5:df
  227. [ 2.797238] ssdk_dt_parse_intf_mac[942]:INFO:dp4 MAC a4:97:33:df:a5:df
  228. [ 2.803819] ssdk_plat_init[1692]:INFO:ssdk_plat_init start
  229. [ 2.924293] ssdk_gcc_clock_init[1275]:INFO:SSDK gcc clock init successfully!
  230. [ 2.927184] malibu_phy_api_ops_init[2846]:INFO:qca probe malibu phy driver succeeded!
  231. [ 2.969437] hsl_phy_phydev_get[773]:ERROR:phy_addr 4 phydev is NULL
  232. [ 2.980103] qca808x_phy_api_ops_init[2566]:INFO:qca probe qca808x phy driver succeeded!
  233. [ 2.990392] regi_init[3953]:INFO:Initializing HPPE!!
  234. [ 3.223321] ssdk_ppe_reset_init[1535]:INFO:ppe reset successfully!
  235. [ 3.226929] qca_hppe_portctrl_hw_init[126]:INFO:Hawkeye PPE port initializing
  236. [ 3.238413] hsl_phy_phydev_get[773]:ERROR:phy_addr 4 phydev is NULL
  237. [ 3.241707] hsl_phy_phydev_get[773]:ERROR:phy_addr 4 phydev is NULL
  238. [ 3.939372] ssdk_switch_register[2017]:INFO:Chip version 0x1500
  239. [ 3.939407] qca_link_polling_select[1487]:INFO:link-polling-required node does not exist
  240. [ 3.944104] ssdk_switch_register[2043]:INFO:polling is selected
  241. [ 3.952429] regi_init[3957]:INFO:Initializing HPPE Done!!
  242. [ 3.958149] ssdk_genl_init[211]:INFO:ssdk genl family register success.
  243. [ 3.963635] regi_init[4020]:INFO:qca-ssdk module init succeeded!
  244. [ 3.972452] EDMA ver 1 hw init
  245. [ 3.976527] EDMA HW Reset completed succesfully
  246. [ 3.979188] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
  247. [ 3.983592] RxDesc:1 (15-15) RxFill:1 (7-7)
  248. [ 3.989816] Generic PHY 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL)
  249. [ 3.993521] nss-dp 3a001000.dp1 lan4: Registered netdev lan4(qcom-id:1)
  250. [ 4.003424] Generic PHY 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
  251. [ 4.009664] nss-dp 3a001200.dp2 lan3: Registered netdev lan3(qcom-id:2)
  252. [ 4.019587] Generic PHY 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
  253. [ 4.025770] nss-dp 3a001400.dp3 lan2: Registered netdev lan2(qcom-id:3)
  254. [ 4.035788] Generic PHY 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
  255. [ 4.041963] nss-dp 3a001600.dp4 lan1: Registered netdev lan1(qcom-id:4)
  256. [ 4.257236] QCA808X ethernet 90000.mdio-1:1c: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:1c, irq=POLL)
  257. [ 4.257780] nss-dp 3a007000.dp6-syn wan: Registered netdev wan(qcom-id:6)
  258. [ 4.266236] **********************************************************
  259. [ 4.272984] * NSS Data Plane driver
  260. [ 4.279408] **********************************************************
  261. [ 4.284065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  262. [ 4.290127] fsl-ehci: Freescale EHCI Host controller driver
  263. [ 4.296513] ehci-platform: EHCI generic platform driver
  264. [ 4.302254] ehci-pci: EHCI PCI platform driver
  265. [ 4.307272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  266. [ 4.311477] ohci-platform: OHCI generic platform driver
  267. [ 4.317987] uhci_hcd: USB Universal Host Controller Interface driver
  268. [ 4.322794] ohci-pci: OHCI PCI platform driver
  269. [ 4.336433] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  270. [ 4.336477] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
  271. [ 4.340935] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010
  272. [ 4.348419] xhci-hcd xhci-hcd.1.auto: irq 89, io mem 0x08a00000
  273. [ 4.357835] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  274. [ 4.363649] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
  275. [ 4.369203] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  276. [ 4.377272] hub 1-0:1.0: USB hub found
  277. [ 4.383392] hub 1-0:1.0: 1 port detected
  278. [ 4.387370] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  279. [ 4.391384] hub 2-0:1.0: USB hub found
  280. [ 4.399316] hub 2-0:1.0: 1 port detected
  281. [ 4.405587] usbcore: registered new interface driver usb-storage
  282. [ 4.407621] usbcore: registered new interface driver uas
  283. [ 4.413049] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  284. [ 4.423742] init: - preinit -
  285. [ 4.673364] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  286. [ 4.854380] usb-storage 1-1:1.0: USB Mass Storage device detected
  287. [ 4.854658] scsi host0: usb-storage 1-1:1.0
  288. [ 5.914275] scsi 0:0:0:0: Direct-Access SanDisk' Cruzer Fit 1.00 PQ: 0 ANSI: 6
  289. [ 5.915638] sd 0:0:0:0: [sda] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB)
  290. [ 5.922669] sd 0:0:0:0: [sda] Write Protect is off
  291. [ 5.928835] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
  292. [ 5.929177] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  293. [ 5.938497] sda: sda1
  294. [ 5.944053] sd 0:0:0:0: [sda] Attached SCSI removable disk
  295. [ 6.774645] mount_root: loading kmods from internal overlay
  296. [ 6.781847] kmodloader: loading kernel modules from //etc/modules-boot.d/*
  297. [ 6.782902] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
  298. [ 6.804378] nss-dp 3a001600.dp4 lan1: PHY Link up speed: 1000
  299. [ 6.804449] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
  300. [ 6.815893] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  301. [ 6.938060] UBIFS (ubi0:2): Mounting in unauthenticated mode
  302. [ 6.938177] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 775
  303. [ 7.013561] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
  304. [ 7.013603] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  305. [ 7.020383] UBIFS (ubi0:2): FS size: 71487488 bytes (68 MiB, 563 LEBs), max 573 LEBs, journal size 3555328 bytes (3 MiB, 28 LEBs)
  306. [ 7.030292] UBIFS (ubi0:2): reserved for root: 3376530 bytes (3297 KiB)
  307. [ 7.041911] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID D8453247-1BC1-4277-9CA5-CFDCA3C85352, small LPT model
  308. [ 7.049047] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
  309. [ 7.059934] block: unable to load configuration (fstab: Entry not found)
  310. [ 7.066628] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
  311. [ 7.073776] block: unable to load configuration (fstab: Entry not found)
  312. [ 7.079877] block: attempting to load /etc/config/fstab
  313. [ 7.089970] block: unable to load configuration (fstab: Entry not found)
  314. [ 7.091612] block: no usable configuration
  315. [ 7.100467] UBIFS (ubi0:2): un-mount UBI device 0
  316. [ 7.102426] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
  317. [ 7.109722] UBIFS (ubi0:2): Mounting in unauthenticated mode
  318. [ 7.113396] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 778
  319. [ 7.187964] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
  320. [ 7.188004] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  321. [ 7.194801] UBIFS (ubi0:2): FS size: 71487488 bytes (68 MiB, 563 LEBs), max 573 LEBs, journal size 3555328 bytes (3 MiB, 28 LEBs)
  322. [ 7.204691] UBIFS (ubi0:2): reserved for root: 3376530 bytes (3297 KiB)
  323. [ 7.216312] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID D8453247-1BC1-4277-9CA5-CFDCA3C85352, small LPT model
  324. [ 7.227141] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  325. [ 7.319365] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
  326. [ 7.319466] block: unable to load configuration (fstab: Entry not found)
  327. [ 7.325205] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
  328. [ 7.332135] block: unable to load configuration (fstab: Entry not found)
  329. [ 7.338473] block: attempting to load /etc/config/fstab
  330. [ 7.345241] block: unable to load configuration (fstab: Entry not found)
  331. [ 7.350165] block: no usable configuration
  332. [ 7.357734] mount_root: overlay filesystem has not been fully initialized yet
  333. [ 7.361451] mount_root: switching to ubifs overlay
  334. [ 7.374239] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
  335. [ 7.577330] urandom-seed: Seed file not found (/etc/urandom.seed)
  336. [ 7.594015] nss-dp 3a001600.dp4 lan1: PHY Link is down
  337. [ 7.596982] procd: - early -
  338. [ 7.598092] procd: - watchdog -
  339. [ 7.645098] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  340. [ 7.737337] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  341. [ 7.833130] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  342. [ 7.923559] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  343. [ 8.022121] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  344. [ 8.124332] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  345. [ 8.131782] procd: - watchdog -
  346. [ 8.132343] procd: - ubus -
  347. [ 8.190706] procd: - init -
  348. [ 8.228369] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  349. [ 8.333661] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  350. [ 8.364679] urngd: v1.0.2 started.
  351. [ 8.382705] kmodloader: loading kernel modules from /etc/modules.d/*
  352. [ 8.435919] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  353. [ 8.453072] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
  354. [ 8.453113] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
  355. [ 8.464136] NET: Registered PF_QIPCRTR protocol family
  356. [ 8.490295] PPP generic driver version 2.4.2
  357. [ 8.491039] NET: Registered PF_PPPOX protocol family
  358. [ 8.499162] ath11k c000000.wifi: ipq8074 hw2.0
  359. [ 8.499195] ath11k c000000.wifi: FW memory mode: 0
  360. [ 8.503063] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
  361. [ 8.507807] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
  362. [ 8.530217] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  363. [ 8.642155] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  364. [ 8.738926] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  365. [ 8.845962] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  366. [ 8.943150] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  367. [ 9.048472] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  368. [ 9.146804] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  369. [ 9.244657] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  370. [ 9.333336] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  371. [ 9.421818] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  372. [ 9.510329] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
  373. [ 9.514643] kmodloader: done loading kernel modules from /etc/modules.d/*
  374. [ 9.517162] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  375. [ 9.554011] ath11k c000000.wifi: qmi ignore invalid mem req type 3
  376. [ 9.561497] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
  377. [ 9.561545] ath11k c000000.wifi: fw_version 0x290c84a5 fw_build_timestamp 2023-03-25 07:34 fw_build_id WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1
  378. [ 9.626293] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  379. [ 9.722572] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  380. [ 9.820369] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  381. [ 9.925163] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  382. [ 10.021869] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  383. [ 10.066118] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  384. [ 10.125895] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  385. [ 10.224470] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  386. [ 10.329361] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  387. [ 10.451149] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  388. [ 10.555352] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  389. [ 10.649761] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  390. [ 10.769105] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  391. [ 10.869479] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  392. [ 10.970182] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  393. [ 11.062415] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  394. [ 11.167344] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
  395. [ 11.629842] ath11k c000000.wifi: htt event 48 not handled
  396. [ 11.934064] br-lan: port 1(lan1) entered blocking state
  397. [ 11.934113] br-lan: port 1(lan1) entered disabled state
  398. [ 11.938375] device lan1 entered promiscuous mode
  399. [ 11.949677] nss-dp 3a001400.dp3 lan2: PHY Link up speed: 100
  400. [ 11.950246] br-lan: port 2(lan2) entered blocking state
  401. [ 11.954444] br-lan: port 2(lan2) entered disabled state
  402. [ 11.959554] device lan2 entered promiscuous mode
  403. [ 11.973385] br-lan: port 3(lan3) entered blocking state
  404. [ 11.973427] br-lan: port 3(lan3) entered disabled state
  405. [ 11.977612] device lan3 entered promiscuous mode
  406. [ 11.987422] br-lan: port 4(lan4) entered blocking state
  407. [ 11.987496] br-lan: port 4(lan4) entered disabled state
  408. [ 11.992656] device lan4 entered promiscuous mode
  409. [ 12.010160] vlan: port 1(vlan.20) entered blocking state
  410. [ 12.010205] vlan: port 1(vlan.20) entered disabled state
  411. [ 12.022860] vlan: port 1(vlan.20) entered blocking state
  412. [ 12.022907] vlan: port 1(vlan.20) entered disabled state
  413. [ 12.027987] vlan: port 1(vlan.20) entered blocking state
  414. [ 12.032549] vlan: port 1(vlan.20) entered disabled state
  415. [ 12.044941] vlan: port 1(vlan.20) entered blocking state
  416. [ 12.044987] vlan: port 1(vlan.20) entered disabled state
  417. [ 12.049742] vlan: port 1(vlan.22) entered blocking state
  418. [ 12.054667] vlan: port 1(vlan.22) entered disabled state
  419. [ 12.060518] vlan: port 1(vlan.22) entered blocking state
  420. [ 12.065310] vlan: port 1(vlan.22) entered disabled state
  421. [ 12.087183] vlan: port 1(vlan.22) entered blocking state
  422. [ 12.087231] vlan: port 1(vlan.22) entered disabled state
  423. [ 12.092029] vlan: port 1(vlan.22) entered blocking state
  424. [ 12.096927] vlan: port 1(vlan.22) entered disabled state
  425. [ 12.322258] vlan: port 1(vlan.20) entered blocking state
  426. [ 12.322306] vlan: port 1(vlan.20) entered disabled state
  427. [ 12.327238] vlan: port 1(vlan.20) entered blocking state
  428. [ 12.331946] vlan: port 1(vlan.20) entered disabled state
  429. [ 12.349288] vlan: port 1(vlan.20) entered blocking state
  430. [ 12.349332] vlan: port 1(vlan.20) entered disabled state
  431. [ 12.354142] vlan: port 1(vlan.20) entered blocking state
  432. [ 12.358973] vlan: port 1(vlan.20) entered disabled state
  433. [ 12.365004] vlan: port 1(vlan.22) entered blocking state
  434. [ 12.369563] vlan: port 1(vlan.22) entered disabled state
  435. [ 12.375600] vlan: port 1(vlan.22) entered blocking state
  436. [ 12.380155] vlan: port 1(vlan.22) entered disabled state
  437. [ 12.386077] vlan: port 1(vlan.22) entered blocking state
  438. [ 12.390744] vlan: port 1(vlan.22) entered disabled state
  439. [ 12.402671] vlan: port 1(vlan.22) entered blocking state
  440. [ 12.402714] vlan: port 1(vlan.22) entered disabled state
  441. [ 12.962468] br-lan: port 2(lan2) entered blocking state
  442. [ 12.962520] br-lan: port 2(lan2) entered forwarding state
  443. [ 13.045577] vlan: port 1(phy0-ap0) entered blocking state
  444. [ 13.045623] vlan: port 1(phy0-ap0) entered disabled state
  445. [ 13.050361] device phy0-ap0 entered promiscuous mode
  446. [ 13.055508] vlan: port 1(phy0-ap0) entered blocking state
  447. [ 13.060412] vlan: port 1(phy0-ap0) entered forwarding state
  448. [ 13.066190] IPv6: ADDRCONF(NETDEV_CHANGE): vlan.20: link becomes ready
  449. [ 13.071329] IPv6: ADDRCONF(NETDEV_CHANGE): vlan.22: link becomes ready
  450. [ 13.163275] vlan: port 2(phy1-ap0) entered blocking state
  451. [ 13.163361] vlan: port 2(phy1-ap0) entered disabled state
  452. [ 13.167967] device phy1-ap0 entered promiscuous mode
  453. [ 13.173225] vlan: port 2(phy1-ap0) entered blocking state
  454. [ 13.178170] vlan: port 2(phy1-ap0) entered forwarding state
  455. [ 14.061900] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready
  456. [ 14.062524] vlan: port 2(phy1-ap0) entered disabled state
  457. [ 14.076104] br-lan: port 5(phy0-ap1) entered blocking state
  458. [ 14.076151] br-lan: port 5(phy0-ap1) entered disabled state
  459. [ 14.080707] device phy0-ap1 entered promiscuous mode
  460. [ 14.087524] br-lan: port 5(phy0-ap1) entered blocking state
  461. [ 14.091265] br-lan: port 5(phy0-ap1) entered forwarding state
  462. [ 15.034787] nss-dp 3a001600.dp4 lan1: PHY Link up speed: 1000
  463. [ 15.034872] br-lan: port 1(lan1) entered blocking state
  464. [ 15.039529] br-lan: port 1(lan1) entered forwarding state
  465. [ 15.599928] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
  466. [ 15.600126] vlan: port 2(phy1-ap0) entered blocking state
  467. [ 15.605417] vlan: port 2(phy1-ap0) entered forwarding state
  468. [ 15.613864] vlan: port 3(phy1-ap1) entered blocking state
  469. [ 15.616318] vlan: port 3(phy1-ap1) entered disabled state
  470. [ 15.622099] device phy1-ap1 entered promiscuous mode
  471. [ 15.628645] vlan: port 3(phy1-ap1) entered blocking state
  472. [ 15.632287] vlan: port 3(phy1-ap1) entered forwarding state
  473. [ 15.774798] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap1: link becomes ready
  474. [ 15.777677] br-lan: port 6(phy1-ap2) entered blocking state
  475. [ 15.780228] br-lan: port 6(phy1-ap2) entered disabled state
  476. [ 15.786079] device phy1-ap2 entered promiscuous mode
  477. [ 15.792639] br-lan: port 6(phy1-ap2) entered blocking state
  478. [ 15.796564] br-lan: port 6(phy1-ap2) entered forwarding state
  479. [ 15.944798] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap2: link becomes ready
  480. [ 16.474607] nss-dp 3a007000.dp6-syn wan: PHY Link up speed: 2500
  481. [ 16.474679] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
  482. [ 32.473386] l11: disabling
  483. [ 72.393591] ath11k c000000.wifi: failed to flush transmit queue, data pkts pending 1
  484. [ 5688.575566] ath11k c000000.wifi: failed to flush transmit queue, data pkts pending 1
  485. [ 5760.655819] ath11k c000000.wifi: failed to flush transmit queue, data pkts pending 1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!