Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.55-Unraid] (local build)
- Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red
- Device Model: WDC WD60EFRX-68MYMN1
- Serial Number: WD-WXP1H645YVDF
- LU WWN Device Id: 5 0014ee 2b6eb26cc
- Firmware Version: 82.00A82
- User Capacity: 6,001,175,126,016 bytes [6.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5700 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Thu Dec 12 20:32:30 2019 MST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 118) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 3644) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 690) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x303d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 229 197 021 - 7550
- 4 Start_Stop_Count -O--CK 100 100 000 - 55
- 5 Reallocated_Sector_Ct PO--CK 198 198 140 - 62
- 7 Seek_Error_Rate -OSR-K 185 185 000 - 130
- 9 Power_On_Hours -O--CK 054 054 000 - 34052
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 54
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 46
- 193 Load_Cycle_Count -O--CK 188 188 000 - 38617
- 194 Temperature_Celsius -O---K 113 109 000 - 39
- 196 Reallocated_Event_Count -O--CK 198 198 000 - 2
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 40 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 9
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 9 [8] occurred at disk power-on lifetime: 34043 hours (1418 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 03 40 00 00 00 03 d5 c0 e0 00 Error: IDNF 832 sectors at LBA = 0x0003d5c0 = 251328
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 03 40 00 00 00 03 d5 c0 e0 08 19d+03:32:19.000 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 e0 08 19d+03:31:36.737 FLUSH CACHE EXT
- 35 00 00 05 40 00 00 00 03 d0 80 e0 08 19d+03:31:36.735 WRITE DMA EXT
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 19d+03:31:36.735 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 19d+03:31:36.735 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- Error 8 [7] occurred at disk power-on lifetime: 34043 hours (1418 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 05 40 00 00 00 03 cb 40 e0 00 Error: IDNF 1344 sectors at LBA = 0x0003cb40 = 248640
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 05 40 00 00 00 03 cb 40 e0 08 19d+03:31:29.743 WRITE DMA EXT
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 19d+03:31:29.743 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 19d+03:31:29.743 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 19d+03:31:29.742 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 19d+03:31:29.742 SET FEATURES [Set transfer mode]
- Error 7 [6] occurred at disk power-on lifetime: 34043 hours (1418 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 05 40 00 00 00 03 cb 40 e0 00 Error: IDNF 1344 sectors at LBA = 0x0003cb40 = 248640
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 05 40 00 00 00 03 cb 40 e0 08 19d+03:31:22.751 WRITE DMA EXT
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 19d+03:31:22.751 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 19d+03:31:22.751 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 19d+03:31:22.751 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 19d+03:31:22.751 SET FEATURES [Set transfer mode]
- Error 6 [5] occurred at disk power-on lifetime: 34043 hours (1418 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 05 40 00 00 00 03 cb 40 e0 00 Error: IDNF 1344 sectors at LBA = 0x0003cb40 = 248640
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 05 40 00 00 00 03 cb 40 e0 08 19d+03:31:15.761 WRITE DMA EXT
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 19d+03:31:15.761 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 19d+03:31:15.761 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 19d+03:31:15.761 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 19d+03:31:15.761 SET FEATURES [Set transfer mode]
- Error 5 [4] occurred at disk power-on lifetime: 34043 hours (1418 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 05 40 00 00 00 03 cb 40 e0 00 Error: IDNF 1344 sectors at LBA = 0x0003cb40 = 248640
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 05 40 00 00 00 03 cb 40 e0 08 19d+03:31:08.770 WRITE DMA EXT
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 19d+03:31:08.770 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 19d+03:31:08.770 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 19d+03:31:08.770 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 19d+03:31:08.770 SET FEATURES [Set transfer mode]
- Error 4 [3] occurred at disk power-on lifetime: 34043 hours (1418 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 05 40 00 00 00 03 cb 40 e0 00 Error: IDNF 1344 sectors at LBA = 0x0003cb40 = 248640
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 05 40 00 00 00 03 cb 40 e0 08 19d+03:31:01.780 WRITE DMA EXT
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 19d+03:31:01.780 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 19d+03:31:01.780 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 19d+03:31:01.780 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 19d+03:31:01.780 SET FEATURES [Set transfer mode]
- Error 3 [2] occurred at disk power-on lifetime: 34043 hours (1418 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 05 40 00 00 00 03 cb 40 e0 00 Error: IDNF 1344 sectors at LBA = 0x0003cb40 = 248640
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 05 40 00 00 00 03 cb 40 e0 08 19d+03:30:54.777 WRITE DMA EXT
- 35 00 00 05 40 00 00 00 03 c6 00 e0 08 19d+03:30:54.773 WRITE DMA EXT
- 35 00 00 05 40 00 00 00 03 c0 c0 e0 08 19d+03:30:54.741 WRITE DMA EXT
- 35 00 00 05 40 00 00 00 03 bb 80 e0 08 19d+03:30:54.739 WRITE DMA EXT
- 35 00 00 05 40 00 00 00 03 b6 40 e0 08 19d+03:30:54.737 WRITE DMA EXT
- Error 2 [1] occurred at disk power-on lifetime: 29952 hours (1248 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 09 db 5f 50 40 00 Error: IDNF at LBA = 0x09db5f50 = 165371728
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 05 40 00 50 00 00 09 bd 69 10 40 08 00:24:09.885 WRITE FPDMA QUEUED
- 61 05 40 00 48 00 00 09 bd 63 d0 40 08 00:24:09.880 WRITE FPDMA QUEUED
- 61 05 40 00 40 00 00 09 bd 5e 90 40 08 00:24:09.874 WRITE FPDMA QUEUED
- 61 05 40 00 78 00 00 09 bd 59 50 40 08 00:24:09.869 WRITE FPDMA QUEUED
- 61 05 40 00 f0 00 00 09 bd 54 10 40 08 00:24:09.864 WRITE FPDMA QUEUED
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 60% 34052 238336
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- Device State: Active (0)
- Current Temperature: 39 Celsius
- Power Cycle Min/Max Temperature: 31/43 Celsius
- Lifetime Min/Max Temperature: 2/43 Celsius
- Under/Over Temperature Limit Count: 0/0
- Vendor specific:
- 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (252)
- Index Estimated Time Temperature Celsius
- 253 2019-12-12 12:35 36 *****************
- ... ..( 5 skipped). .. *****************
- 259 2019-12-12 12:41 36 *****************
- 260 2019-12-12 12:42 37 ******************
- ... ..( 32 skipped). .. ******************
- 293 2019-12-12 13:15 37 ******************
- 294 2019-12-12 13:16 36 *****************
- ... ..( 48 skipped). .. *****************
- 343 2019-12-12 14:05 36 *****************
- 344 2019-12-12 14:06 37 ******************
- ... ..( 2 skipped). .. ******************
- 347 2019-12-12 14:09 37 ******************
- 348 2019-12-12 14:10 38 *******************
- ... ..( 4 skipped). .. *******************
- 353 2019-12-12 14:15 38 *******************
- 354 2019-12-12 14:16 39 ********************
- ... ..( 47 skipped). .. ********************
- 402 2019-12-12 15:04 39 ********************
- 403 2019-12-12 15:05 38 *******************
- ... ..( 20 skipped). .. *******************
- 424 2019-12-12 15:26 38 *******************
- 425 2019-12-12 15:27 37 ******************
- ... ..( 13 skipped). .. ******************
- 439 2019-12-12 15:41 37 ******************
- 440 2019-12-12 15:42 38 *******************
- 441 2019-12-12 15:43 38 *******************
- 442 2019-12-12 15:44 38 *******************
- 443 2019-12-12 15:45 39 ********************
- ... ..( 19 skipped). .. ********************
- 463 2019-12-12 16:05 39 ********************
- 464 2019-12-12 16:06 ? -
- 465 2019-12-12 16:07 39 ********************
- ... ..( 2 skipped). .. ********************
- 468 2019-12-12 16:10 39 ********************
- 469 2019-12-12 16:11 37 ******************
- ... ..( 22 skipped). .. ******************
- 14 2019-12-12 16:34 37 ******************
- 15 2019-12-12 16:35 36 *****************
- ... ..( 8 skipped). .. *****************
- 24 2019-12-12 16:44 36 *****************
- 25 2019-12-12 16:45 37 ******************
- ... ..( 20 skipped). .. ******************
- 46 2019-12-12 17:06 37 ******************
- 47 2019-12-12 17:07 36 *****************
- ... ..( 40 skipped). .. *****************
- 88 2019-12-12 17:48 36 *****************
- 89 2019-12-12 17:49 37 ******************
- ... ..( 21 skipped). .. ******************
- 111 2019-12-12 18:11 37 ******************
- 112 2019-12-12 18:12 36 *****************
- ... ..( 35 skipped). .. *****************
- 148 2019-12-12 18:48 36 *****************
- 149 2019-12-12 18:49 37 ******************
- ... ..( 14 skipped). .. ******************
- 164 2019-12-12 19:04 37 ******************
- 165 2019-12-12 19:05 38 *******************
- ... ..( 3 skipped). .. *******************
- 169 2019-12-12 19:09 38 *******************
- 170 2019-12-12 19:10 37 ******************
- ... ..( 12 skipped). .. ******************
- 183 2019-12-12 19:23 37 ******************
- 184 2019-12-12 19:24 36 *****************
- ... ..( 67 skipped). .. *****************
- 252 2019-12-12 20:32 36 *****************
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- Device Statistics (GP/SMART Log 0x04) not supported
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 10276066 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement