Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Booting Linux on physical CPU 0
- Initializing cgroup subsys cpu
- Linux version 3.6.11 (root@buildraspbmc) (gcc version 4.7.1 20120402 (prerelease) (crosstool-NG 1.15.2) ) #2 PREEMPT Wed Mar 13 17:12:47 UTC 2013
- CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- Machine: BCM2708
- Memory policy: ECC disabled, Data cache writeback
- On node 0 totalpages: 32768
- free_area_init_node: node 0, pgdat c04f6218, node_mem_map c0545000
- Normal zone: 256 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 32512 pages, LIFO batch:7
- pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708.boardrev=0x2 bcm2708.serial=0x12c85d2f smsc95xx.macaddr=B8:27:EB:C8:5D:2F sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0xec00000 vc_mem.mem_size=0x10000000 dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 noatime quiet rootwait loglevel=1 zram.num_devices=2
- PID hash table entries: 512 (order: -1, 2048 bytes)
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Memory: 128MB = 128MB total
- Memory: 124500k/124500k available, 6572k reserved, 0K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
- lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .text : 0xc0008000 - 0xc049c000 (4688 kB)
- .init : 0xc049c000 - 0xc04c7adc ( 175 kB)
- .data : 0xc04c8000 - 0xc04f6940 ( 187 kB)
- .bss : 0xc04f6964 - 0xc0544469 ( 311 kB)
- NR_IRQS:330
- sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- Console: colour dummy device 80x30
- console [tty0] enabled
- Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- Setting up static identity map for 0x41d978 - 0x41d9d4
- devtmpfs: initialized
- NET: Registered protocol family 16
- DMA: preallocated 4096 KiB pool for atomic coherent allocations
- bcm2708.uart_clock = 0
- mailbox: Broadcom VideoCore Mailbox driver
- bcm2708_vcio: mailbox at f200b880
- bcm_power: Broadcom power driver
- bcm_power_open() -> 0
- bcm_power_request(0, 8)
- bcm_mailbox_read -> 00000080, 0
- bcm_power_request -> 0
- Serial: AMBA PL011 UART driver
- dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Switching to clocksource stc
- FS-Cache: Loaded
- CacheFiles: Loaded
- NET: Registered protocol family 2
- TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP: reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- bcm2708_dma: DMA manager at f2007000
- bcm2708_gpio: bcm2708_gpio_probe c04d41c8
- vc-mem: phys_addr:0x00000000 mem_base=0x0ec00000 mem_size:0x10000000(256 MiB)
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- FS-Cache: Netfs 'nfs' registered for caching
- NFS: Registering the id_resolver key type
- Key type id_resolver registered
- Key type id_legacy registered
- msgmni has been set to 243
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered (default)
- io scheduler deadline registered
- io scheduler cfq registered
- Console: switching to colour frame buffer device 240x67
- brd: module loaded
- loop: module loaded
- vchiq: vchiq_init_state: slot_zero = 0xc8804000, is_master = 0
- usbcore: registered new interface driver smsc95xx
- usbcore: registered new interface driver cdc_ncm
- dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- Core Release: 2.80a
- Setting default values for core params
- Finished setting default values for core params
- Using Buffer DMA mode
- Periodic Transfer Interrupt Enhancement - disabled
- Multiprocessor Interrupt Enhancement - disabled
- OTG VER PARAM: 0, OTG VER FLAG: 0
- Dedicated Tx FIFOs mode
- dwc_otg: Microframe scheduler enabled
- dwc_otg bcm2708_usb: DWC OTG Controller
- dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
- dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
- Init: Port Power? op_state=1
- Init: Power Port (0)
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: DWC OTG Controller
- usb usb1: Manufacturer: Linux 3.6.11 dwc_otg_hcd
- usb usb1: SerialNumber: bcm2708_usb
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- dwc_otg: FIQ enabled
- dwc_otg: NAK holdoff enabled
- Module dwc_common_port init
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- usbcore: registered new interface driver libusual
- mousedev: PS/2 mouse device common for all mice
- bcm2835-cpufreq: min=700000 max=950000 cur=700000
- bcm2835-cpufreq: switching to governor ondemand
- bcm2835-cpufreq: switching to governor ondemand
- cpuidle: using governor ladder
- cpuidle: using governor menu
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhci: Enable low-latency mode
- Registered led device: mmc0::
- mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
- mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
- sdhci-pltfm: SDHCI platform and OF driver helper
- Registered led device: led0
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- zram: Creating 2 devices ...
- TCP: westwood registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- Key type dns_resolver registered
- VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- Waiting for root device /dev/mmcblk0p2...
- mmc0: new high speed SDHC card at address b368
- mmcblk0: mmc0:b368 SMI 7.75 GiB
- mmcblk0: p1 p2
- EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- VFS: Mounted root (ext4 filesystem) on device 179:2.
- devtmpfs: mounted
- Freeing init memory: 172K
- Indeed it is in host mode hprt0 = 00021501
- usb 1-1: new high-speed USB device number 2 using dwc_otg
- Indeed it is in host mode hprt0 = 00001101
- usb 1-1: New USB device found, idVendor=0424, idProduct=9512
- usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 3 ports detected
- usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- EXT4-fs (zram0): mounting ext2 file system using the ext4 subsystem
- EXT4-fs (zram0): mounted filesystem without journal. Opts: (null)
- usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- smsc95xx v1.0.4
- smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:c8:5d:2f
- usb 1-1.2: new low-speed USB device number 4 using dwc_otg
- usb 1-1.2: New USB device found, idVendor=045e, idProduct=005f
- usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 1-1.2: Product: Microsoft Wireless Optical Desktop\xffffffc2\xffffffae 1.00
- usb 1-1.2: Manufacturer: Microsoft
- input: Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae 1.00 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
- hid-generic 0003:045E:005F.0001: input: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae 1.00] on usb-bcm2708_usb-1.2/input0
- input: Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae 1.00 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input1
- hid-generic 0003:045E:005F.0002: input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae 1.00] on usb-bcm2708_usb-1.2/input1
- udevd[89]: starting version 175
- bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
- bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
- bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100k)
- bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100k)
- EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- ip_tables: (C) 2000-2006 Netfilter Core Team
- Adding 65532k swap on /swap. Priority:-1 extents:1 across:65532k SS
- nf_conntrack version 0.5.0 (1948 buckets, 7792 max)
- Console: switching to colour dummy device 80x30
- NET: Registered protocol family 10
- IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- bcm2708 watchdog, heartbeat=10 sec (nowayout=0)
- mmc0: final write to SD card still running
- mmc0: Timeout waiting for hardware interrupt - cmd12.
- mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x900
- mmc0: final write to SD card still running
- mmc0: Timeout waiting for hardware interrupt - cmd12.
- mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x900
- mmc0: final write to SD card still running
- mmc0: Timeout waiting for hardware interrupt - cmd12.
- mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x900
- mmc0: final write to SD card still running
- mmc0: Timeout waiting for hardware interrupt - cmd12.
- mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x900
- mmc0: final write to SD card still running
- mmc0: Timeout waiting for hardware interrupt - cmd12.
- mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x900
- mmc0: final write to SD card still running
- mmc0: Timeout waiting for hardware interrupt - cmd12.
- mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x900
- mmc0: final write to SD card still running
- mmc0: Timeout waiting for hardware interrupt - cmd12.
- mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x900
- mmc0: final write to SD card still running
- mmc0: Timeout waiting for hardware interrupt - cmd12.
- mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x900
- mmc0: final write to SD card still running
- mmc0: Timeout waiting for hardware interrupt - cmd12.
- mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x900
- mmc0: final write to SD card still running
- mmc0: Timeout waiting for hardware interrupt - cmd12.
- mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x900
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement