SHOW:
|
|
- or go back to the newest paste.
| 1 | Automatic boot of image at addr 0x80800000 ... | |
| 2 | ## Booting image at 80800000 ... | |
| 3 | Image Name: FreeBSD | |
| 4 | Created: 2015-12-27 11:56:15 UTC | |
| 5 | Image Type: MIPS Linux Kernel Image (lzma compressed) | |
| 6 | Data Size: 6083606 Bytes = 5.8 MB | |
| 7 | Load Address: 80001100 | |
| 8 | Entry Point: 80001100 | |
| 9 | Verifying Checksum ... OK | |
| 10 | Uncompressing Kernel Image ... OK | |
| 11 | No initrd | |
| 12 | ## Transferring control to Linux (at address 80001100) ... | |
| 13 | ## Giving linux memsize in MB, 32 | |
| 14 | ||
| 15 | Starting kernel ... | |
| 16 | ||
| 17 | U-Boot args (from 0 args): | |
| 18 | None | |
| 19 | Environment: | |
| 20 | memsize=32 | |
| 21 | initrd_start=0x00000000 | |
| 22 | initrd_size=0x0 | |
| 23 | flash_start=0x00000000 | |
| 24 | flash_size=0x800000 | |
| 25 | entry: mips_init() | |
| 26 | Cache info: | |
| 27 | picache_stride = 4096 | |
| 28 | picache_loopcount = 8 | |
| 29 | pdcache_stride = 4096 | |
| 30 | pdcache_loopcount = 4 | |
| 31 | cpu0: MIPS Technologies processor v76.150 | |
| 32 | MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) | |
| 33 | L1 i-cache: 4 ways of 256 sets, 32 bytes per line | |
| 34 | L1 d-cache: 4 ways of 128 sets, 32 bytes per line | |
| 35 | L2 cache: disabled | |
| 36 | Config1=0xbea3319e<PerfCount,WatchRegs,MIPS16,EJTAG> | |
| 37 | Config2=0x80000000 | |
| 38 | Config3=0x420 | |
| 39 | Physical memory chunk(s): | |
| 40 | 0x8c5000 - 0x1ffffff, 24358912 bytes (5947 pages) | |
| 41 | Maxmem is 0x2000000 | |
| 42 | KDB: debugger backends: ddb | |
| 43 | KDB: current backend: ddb | |
| 44 | Copyright (c) 1992-2015 The FreeBSD Project. | |
| 45 | Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
| 46 | The Regents of the University of California. All rights reserved. | |
| 47 | FreeBSD is a registered trademark of The FreeBSD Foundation. | |
| 48 | FreeBSD 11.0-CURRENT #20 d1bbd87(master)-dirty: Sun Dec 27 17:25:42 IST 2015 | |
| 49 | anant@bsd:/usr/home/anant/obj/mipsel/mips.mipsel/usr/home/anant/freebsd/sys/RT5350 mips | |
| 50 | gcc version 4.2.1 20070831 patched [FreeBSD] | |
| 51 | WARNING: WITNESS option enabled, expect reduced performance. | |
| 52 | Preloaded elf kernel "kernel" at 0x808be890. | |
| 53 | real memory = 33554432 (32768K bytes) | |
| 54 | Physical memory chunk(s): | |
| 55 | 0x00951000 - 0x01f57fff, 23097344 bytes (5639 pages) | |
| 56 | avail memory = 19374080 (18MB) | |
| 57 | ULE: setup cpu 0 | |
| 58 | wlan: <802.11 Link Layer> | |
| 59 | random: entropy device external interface | |
| 60 | mem: <memory> | |
| 61 | null: <full device, null device, zero device> | |
| 62 | nexus0: <MIPS32 root nexus> | |
| 63 | clock0: <Generic MIPS32 ticker> on nexus0 | |
| 64 | Timecounter "MIPS32" frequency 180000000 Hz quality 800 | |
| 65 | Event timer "MIPS32" frequency 180000000 Hz quality 800 | |
| 66 | random: harvesting attach, 8 bytes (4 bits) from clock0 | |
| 67 | obio0 at mem 0x10000000-0x1fffffff on nexus0 | |
| 68 | rt305x_sysctl0: <RT305X System Control driver> at mem 0x10000000-0x100000ff irq 0 on obio0 | |
| 69 | Chip ID: "RT5350 " | |
| 70 | SYSCTL_SYSCFG=0x143000 | |
| 71 | random: harvesting attach, 8 bytes (4 bits) from rt305x_sysctl0 | |
| 72 | rt305x_ic0: <RT305X Interrupt Controller driver> at mem 0x10000200-0x100002ff on obio0 | |
| 73 | random: harvesting attach, 8 bytes (4 bits) from rt305x_ic0 | |
| 74 | uart0: <rt305x_uart> at mem 0x10000500-0x100005ff irq 5 on obio0 | |
| 75 | uart0: fast interrupt | |
| 76 | uart0: PPS capture mode 2 (DCD) | |
| 77 | random: harvesting attach, 8 bytes (4 bits) from uart0 | |
| 78 | spi0: <RT305X SPI> at mem 0x10000b00-0x10000bff on obio0 | |
| 79 | spibus0: <spibus bus> on spi0 | |
| 80 | mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0 | |
| 81 | mx25l0: mx25ll64, sector 65536 bytes, 128 sectors | |
| 82 | random: harvesting attach, 8 bytes (4 bits) from mx25l0 | |
| 83 | random: harvesting attach, 8 bytes (4 bits) from spibus0 | |
| 84 | random: harvesting attach, 8 bytes (4 bits) from spi0 | |
| 85 | uart1: <rt305x_uart> at mem 0x10000c00-0x10000cff irq 12 on obio0 | |
| 86 | uart1: console (115200,n,8,1) | |
| 87 | uart1: fast interrupt | |
| 88 | uart1: PPS capture mode 2 (DCD) | |
| 89 | random: harvesting attach, 8 bytes (4 bits) from uart1 | |
| 90 | ehci0: <Ralink integrated USB 2.0 controller> at mem 0x101c0000-0x101c0fff irq 18 on obio0 | |
| 91 | usbus0: EHCI version 1.0 | |
| 92 | usbus0 on ehci0 | |
| 93 | ehci0: usbpf: Attached | |
| 94 | random: harvesting attach, 8 bytes (4 bits) from usbus0 | |
| 95 | random: harvesting attach, 8 bytes (4 bits) from ehci0 | |
| 96 | random: harvesting attach, 8 bytes (4 bits) from obio0 | |
| 97 | rt0: <Ralink RT5350 onChip Ethernet driver> at mem 0x10100000-0x1010ffff irq 3 on nexus0 | |
| 98 | rt0: RT5350 Ethernet MAC (rev 0x00000000) | |
| 99 | rt0: use hardcoded 00:18:e7:d5:83:90 macaddr | |
| 100 | rt0: bpf attached | |
| 101 | rt0: Ethernet address: 00:18:e7:d5:83:90 | |
| 102 | random: harvesting attach, 8 bytes (4 bits) from rt0 | |
| 103 | random: harvesting attach, 8 bytes (4 bits) from nexus0 | |
| 104 | Device configuration finished. | |
| 105 | Timecounters tick every 10.000 msec | |
| 106 | vlan: initialized, using hash tables with chaining | |
| 107 | tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512 | |
| 108 | lo0: bpf attached | |
| 109 | WARNING: WITNESS option enabled, expect reduced performance. | |
| 110 | md0: Embedded image 4847104 bytes at 0x80328fd0 | |
| 111 | usbus0: 480Mbps High Speed USB v2.0 | |
| 112 | Trying to mount root from ufs:/dev/md0 []... | |
| 113 | ugen0.1: <Ralink> at usbus0 | |
| 114 | uhub0: <Ralink EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 | |
| 115 | GEOM: new disk flash/spi0 | |
| 116 | Mounting from ufs:/dev/md0 failed with error 22. | |
| 117 | Trying to mount root from ufs:md0.uncompress []... | |
| 118 | warning: no time-of-day clock registered, system time will not be set accurately | |
| 119 | start_init: trying /sbin/init | |
| 120 | uhub0: 1 port with 1 removable, self powered | |
| 121 | random: harvesting attach, 8 bytes (4 bits) from uhub0 | |
| 122 | random: unblocking device. | |
| 123 | *** Populating /var .. | |
| 124 | *** Loading configuration files .. | |
| 125 | *** Restoring from .. | |
| 126 | dd: no value specified for if | |
| 127 | gunzip: (stdin): unexpected end of file | |
| 128 | 0 blocks | |
| 129 | *** Completed. | |
| 130 | *** setting up hostname | |
| 131 | *** Load kernel modules | |
| 132 | .. bridgestp | |
| 133 | kldload: can't load bridgestp: module already loaded or in kernel | |
| 134 | .. if_bridge | |
| 135 | kldload: can't load if_bridge: No such file or directory | |
| 136 | .. random | |
| 137 | kldload: can't load random: No such file or directory | |
| 138 | *** Setting kern.random.harvest.mask=511 | |
| 139 | kern.random.harvest.mask: 2047 -> 511 | |
| 140 | *** bringing up loopback .. | |
| 141 | *** Default password/login databases .. | |
| 142 | *** Starting networking via /etc/rc.d/base/net | |
| 143 | *** Interface: rt0: start | |
| 144 | *** Interface: rt0: done | |
| 145 | *** Interface: bridge0: start | |
| 146 | bridge0: bpf attached | |
| 147 | bridge0: Ethernet address: ea:8b:e4:ab:99:ec | |
| 148 | rt0: entering promiscuous mode | |
| 149 | rt0: promiscuous mode enabled | |
| 150 | bridge0: link state changed to UP | |
| 151 | *** Interface: bridge0: done | |
| 152 | *** inetd | |
| 153 | *** Done! | |
| 154 | ||
| 155 | FreeBSD/mips (freebsd-wifi) (ttyu1) | |
| 156 | ||
| 157 | - | login: |
| 157 | + | login: |
