SHOW:
|
|
- or go back to the newest paste.
| 1 | r = peripheral.find("BigReactors-Reactor")
| |
| 2 | t = peripheral.wrap("BigReactors-Turbine_0")
| |
| 3 | t1 = peripheral.wrap("BigReactors-Turbine_1")
| |
| 4 | m = peripheral.wrap("right")
| |
| 5 | ||
| 6 | local isActive = false | |
| 7 | local rotorSpeed = 1800 | |
| 8 | local rotorSpeed1 = 1800 | |
| 9 | local RFGen = 0 | |
| 10 | local RFGen1 = 0 | |
| 11 | local steam = 0 | |
| 12 | local steam1 = 0 | |
| 13 | ||
| 14 | function comma_value(amount) | |
| 15 | local formatted = amount | |
| 16 | local swap = false | |
| 17 | if formatted < 0 then | |
| 18 | formatted = formatted*-1 | |
| 19 | swap = true | |
| 20 | end | |
| 21 | while true do | |
| 22 | formatted, k = string.gsub(formatted, "^(%d+)(%d%d%d)", '%1,%2') | |
| 23 | if k == 0 then | |
| 24 | break | |
| 25 | end | |
| 26 | end | |
| 27 | if swap then | |
| 28 | formatted = "-"..formatted | |
| 29 | end | |
| 30 | return formatted | |
| 31 | end | |
| 32 | ||
| 33 | r.setActive(false) | |
| 34 | t.setInductorEngaged(false) | |
| 35 | t.setActive(true) | |
| 36 | t1.setInductorEngaged(false) | |
| 37 | t1.setActive(true) | |
| 38 | ||
| 39 | while true do | |
| 40 | ||
| 41 | print("Sleep")
| |
| 42 | ||
| 43 | sleep(5) | |
| 44 | ||
| 45 | if rotorSpeed < 1750 then | |
| 46 | print("Extra sleep because of slow rotor!")
| |
| 47 | sleep(5) | |
| 48 | end | |
| 49 | ||
| 50 | if isActive then | |
| 51 | if not redstone.getInput("back") then
| |
| 52 | print("Disable")
| |
| 53 | isActive = false | |
| 54 | r.setActive(false) | |
| 55 | sleep(0.5) | |
| 56 | t.setInductorEngaged(false) | |
| 57 | t1.setInductorEngaged(false) | |
| 58 | end | |
| 59 | else | |
| 60 | if redstone.getInput("back") then
| |
| 61 | print("Enable")
| |
| 62 | isActive = true | |
| 63 | r.setActive(true) | |
| 64 | sleep(0.1) | |
| 65 | t.setInductorEngaged(true) | |
| 66 | t1.setInductorEngaged(true) | |
| 67 | end | |
| 68 | end | |
| 69 | ||
| 70 | m.clear() | |
| 71 | ||
| 72 | rotorSpeed = t.getRotorSpeed() | |
| 73 | rotorSpeed1 = t1.getRotorSpeed() | |
| 74 | ||
| 75 | if isActive then | |
| 76 | ||
| 77 | print("Active!")
| |
| 78 | ||
| 79 | RFGen = t.getEnergyProducedLastTick() | |
| 80 | RFGen1 = t1.getEnergyProducedLastTick() | |
| 81 | steam = t.getFluidFlowRate() | |
| 82 | steam1 = t1.getFluidFlowRate() | |
| 83 | ||
| 84 | m.setCursorPos(1,1) | |
| 85 | ||
| 86 | if rotorSpeed > 1900 then | |
| 87 | m.setTextColor(colors.red) | |
| 88 | m.setCursorPos(1,10) | |
| 89 | m.write("RPM Too High!! Disabling the Reactor and Enabling the Coils!")
| |
| 90 | print("RPM Too High!! Disabling the Reactor and Enabling the Coils!")
| |
| 91 | t.setInductorEngaged(true) | |
| 92 | t1.setInductorEngaged(true) | |
| 93 | r.setActive(false) | |
| 94 | m.setCursorPos(1,1) | |
| 95 | elseif rotorSpeed < 1750 then | |
| 96 | m.setTextColor(colors.blue) | |
| 97 | m.setCursorPos(1,10) | |
| 98 | m.write("RPM Too Low!! Disabling the Coils and Enabling the Reactor!")
| |
| 99 | print("RPM Too Low!! Disabling the Coils and Enabling the Reactor!")
| |
| 100 | t.setInductorEngaged(false) | |
| 101 | t1.setInductorEngaged(false) | |
| 102 | r.setActive(true) | |
| 103 | m.setCursorPos(1,1) | |
| 104 | else | |
| 105 | m.setTextColor(colors.lime) | |
| 106 | t.setInductorEngaged(true) | |
| 107 | t1.setInductorEngaged(true) | |
| 108 | r.setActive(true) | |
| 109 | end | |
| 110 | ||
| 111 | m.write("1. Rotor speed:"..comma_value(rotorSpeed).."RPM")
| |
| 112 | m.setCursorPos(1,2) | |
| 113 | m.write("2. Rotor speed:"..comma_value(rotorSpeed1).."RPM")
| |
| 114 | m.setCursorPos(1,4) | |
| 115 | m.setTextColor(colors.lime) | |
| 116 | m.write("1. RF Generation:"..comma_value(RFGen).."RF/t")
| |
| 117 | m.setCursorPos(1,5) | |
| 118 | m.write("2. RF Generation:"..comma_value(RFGen1).."RF/t")
| |
| 119 | m.setCursorPos(1,7) | |
| 120 | ||
| 121 | if steam < 1990 then | |
| 122 | m.setTextColor(colors.red) | |
| 123 | else | |
| 124 | m.setTextColor(colors.lime) | |
| 125 | end | |
| 126 | ||
| 127 | m.write("1. Steam Generation:"..comma_value(steam).."mB/t")
| |
| 128 | m.setCursorPos(1,8) | |
| 129 | m.write("2. Steam Generation:"..comma_value(steam1).."mB/t")
| |
| 130 | ||
| 131 | else | |
| 132 | ||
| 133 | m.setCursorPos(1,1) | |
| 134 | ||
| 135 | if rotorSpeed > 1900 then | |
| 136 | m.setTextColor(colors.red) | |
| 137 | m.setCursorPos(1,6) | |
| 138 | m.write("RPM Too High!! Disabling the Reactor and Enabling the Coils!")
| |
| 139 | print("RPM Too High!! Disabling the Reactor and Enabling the Coils!")
| |
| 140 | t.setInductorEngaged(true) | |
| 141 | t1.setInductorEngaged(true) | |
| 142 | r.setActive(false) | |
| 143 | - | setCursorPos(1,1) |
| 143 | + | |
| 144 | elseif rotorSpeed < 1750 then | |
| 145 | m.setTextColor(colors.blue) | |
| 146 | m.setCursorPos(1,6) | |
| 147 | m.write("RPM Too Low!! Disabling the Coils and Enabling the Reactor!")
| |
| 148 | print("RPM Too Low!! Disabling the Coils and Enabling the Reactor!")
| |
| 149 | t.setInductorEngaged(false) | |
| 150 | t1.setInductorEngaged(false) | |
| 151 | r.setActive(true) | |
| 152 | m.setCursorPos(1,1) | |
| 153 | else | |
| 154 | m.setTextColor(colors.lime) | |
| 155 | t.setInductorEngaged(false) | |
| 156 | t1.setInductorEngaged(false) | |
| 157 | r.setActive(false) | |
| 158 | end | |
| 159 | ||
| 160 | m.write("1. Rotor speed:"..comma_value(rotorSpeed).."RPM")
| |
| 161 | m.setCursorPos(1,2) | |
| 162 | m.write("2. Rotor speed:"..comma_value(rotorSpeed1).."RPM")
| |
| 163 | m.setCursorPos(1,4) | |
| 164 | m.setTextColor(colors.red) | |
| 165 | m.write("Not Active!")
| |
| 166 | m.setTextColor(colors.white) | |
| 167 | print("Not Active!")
| |
| 168 | ||
| 169 | end | |
| 170 | ||
| 171 | end |
