View difference between Paste ID: jzrkS7u9 and hGxBfZ9s

 =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.03.09 19:09:19 =~=~=~=~=~=~=~=~=~=~=~=
 39idxfsefa7f66fd6a3bb16c939bafb7546b46d5595571bS
-#xos2P62-100 (sfla 128kbytes. subid 0xb0/b0) [serial#5711e2c0bd5240e9042cf14729543cb6]
+
 #xos2P62-100 (sfla 128kbytes. subid 0xb0/b0) [serial#cc8103c2f1752c7cffa600663c5ccd2f]
 #stepxmb 0xac
 *** No valid zxenv found in DevType 0 CS#0, phyblock#0 ! ***
 *** No valid zxenv found in DevType 0 CS#0, phyblock#1 ! ***
 No valid zxenv found in device group 0 CS#0
 No valid zxenv found in device group 0 CS#1
 No valid zxenv found in device group 1 CS#0
 No valid zxenv found in device group 1 CS#1
 Failed to init devtype 2 CS#0
 SATA drive spin-up in progress, please standby...
-#DRAM0 Window  :    0x#27#26#26#28# (19)
+
-#DRAM1 Window  :    0x#29#28#28#28# (20)
+#DRAM0 Window  :    0x#24#26#28#24# (18)
-#DRAM0 Settings: WD=0x090a0a0a RG=0x09090a09 RR=0x09090a09 RF=0x0909090a
+#DRAM1 Window  :    0x#28#28#29#29# (20)
-#DRAM1 Settings: WD=0x0a0a0a0a RG=0x0a090a0a RR=0x0a090a0a RF=0x0a0a0909
+#DRAM0 Settings: WD=0x0a0a0a0a RG=0x08090908 RR=0x08090908 RF=0x09090a0a
-#poisoned 131072 pages with 0xf70ae6d7
+#DRAM1 Settings: WD=0x0a0a0a0a RG=0x09090a0a RR=0x09090a0a RF=0x0a0a0a0a
-#step6 @0x0*** zxenv has been customized compared to build ***
+#poisoned 131072 pages with 0x3d61f70d
 #step6*** zxenv has been customized compared to build ***
 --- review xmasboot/configs/922-A2.config for details [xmbb7-ezboot98-nand_st2] ---
 xloadsize=61748
 xload rc=6
 subrom SHA-256: 43b5383fcd2ecd1f5366bea4eafc03bd740dc0a113af58d02846c117fb581b5b
 ezboot98 @0xd00e5a94 (nand_st2) (actual cpu=@499MHz/dsp=333MHz/sys=333MHz)
  on 8654 rev ES5 (subid 0xb0) a2=0x00000002 a3=0x00000003
 step12
 #step22
 ruamm0 [0x80000000,0x8f2f0000[ (~254738432 bytes)
 ruamm1 [0xcca00000,0xcfd60000[ (~53870592 bytes)
 [0xcfd20000,xos_public_ga=0xcfd20000[ and [0xcfd40000,0xcfd5ffff[ are lost for alignment)
 channel#ei
 ex_ga=0xcfd1fcd4
 [0x8e800000,ios_ga=0x8e800000[ and [0x8eeacfc1,0x8f2f0000[ are lost for alignment)
 GW32 0x0006f008 0xc0000000 [va=0x84000000]
 GW32 0x0006f00c 0xc4000000 [va=0x88000000]
 GW32 0x0006f010 0xc8000000 [va=0x8c000000]
 step33
-xos2 serial = 5711e2c0bd5240e9042cf14729543cb6
+
 xos2 SHA-1 = efa7f66fd6a3bb16c939bafb7546b46d5595571b (version 0x62)
 xos2 serial = cc8103c2f1752c7cffa600663c5ccd2f
 Using zbootxenv ga=0xcfd0bcbc (va=0xbbd0bcbc)
 
 **************************************
 * SMP86xx zboot start ...
 * Version: 3.1.0
 * Started at 0xd00ee720.
 * Configurations (chip revision: 1):
 *    Enabled checkpoints.
 **************************************
 DRAM0 dunit_cfg/delay0_ctrl (0x3514001a/0x4565132b).
 DRAM1 dunit_cfg/delay0_ctrl (0x3514001a/0x4565132b).
 Using UART port 0 as console.
 Board ID.: villa_d2
 Setting up H/W from XENV block at 0xbbd0bcbc.
   Setting <SYSCLK avclk_mux> to 0x17400000.
   Setting <SYSCLK hostclk_mux> to 0x00000130.
   Setting <IRQ rise edge trigger lo> to 0xff28ca00.
   Setting <IRQ fall edge trigger lo> to 0x0000c000.
   Setting <IRQ rise edge trigger hi> to 0x0c10009f.
   Setting <IRQ fall edge trigger hi> to 0x00000000.
   Setting <IRQ GPIO map> to 0x000a0800.
   Setting <PB default timing> to 0x03080202.
   Keeping <PB timing0> to 0x03080202.
   Keeping <PB Use timing0> to 0x000003f3.
   Keeping <PB CS Config> to 0x00330003.
   Enabled Devices: 0x001b3efc
     PCIHost Ethernet Ethernet1 IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SATA SCARD SCARD1
   PCI IRQ routing:
     IDSEL 1: INTA(#14) INTB(#14) INTC(#14) INTD(#14)
     IDSEL 2: INTA(#14) INTB(#14) INTC(#14) INTD(#14)
     IDSEL 3: INTA(#14) INTB(#14) INTC(#14) INTD(#14)
     IDSEL 4: INTA(#14) INTB(#14) INTC(#14) INTD(#14)
   Smartcard pin assignments:
     OFF pin = 2
     5V pin = 0
     CMD pin = 1
   Smartcard1 pin assignments:
     OFF pin = 2
     5V pin = 0
     CMD pin = 1
 cd#0 disabled
 cd#1 disabled
 cd#2 want 96000000Hz: setting of 0x0000000021c00000-2^28
 cd#2 cannot measure
-cd#4 measured to 33328kHz
+
 cd#4 want 33333333Hz: setting of 0x0000000061333343-2^28
 cd#4 measured to 33332kHz
 cd#5 disabled
 cd#6 disabled
 cd#7 disabled
 cd#8 disabled
 cd#9 disabled
 cd#10 disabled
 cd#11 disabled
   GPIO dir/data = 0x00000880/0x00000880
   UART0 GPIO mode/dir/data = 0x6e/0x00/0x00
   UART1 GPIO mode/dir/data = 0x6e/0x04/0x04
-  MAC0: 00:16:e8:11:e2:c0
+
-  MAC1: 00:16:e8:2c:f1:47
+
   MAC0: 00:16:e8:81:03:c2
   MAC1: 00:16:e8:a6:00:66
 XENV block processing completed.
 Default boot index: 0, sel:0
 xmboot booted from devtype: 4, chipsel: 1, phyblocknum: 0
 Explicit boot order specified:
   0x40 : devtype=4, CS=0
   0x41 : devtype=4, CS=1
 WARNING: ezboot encroaches upon ruamm#0 zone
 ezboot buffers, setup in DRAM bank#0:
   Alloting 1048576 bytes for heap.
   Alloting 8388608 bytes for reading.
   Alloting 8388608 bytes for decryption.
 xmat romfs goes to 0xcf50bca0 (ga)
 xmat romfs goes to 0xb350bca0 (va)
 Trying devtype=4 chipsel=0
 Failed to init!
 Trying devtype=4 chipsel=1
 Not a valid ROMFS
 Failed to find valid xmat romfs in any device / chip select!
 freeing xmat romfs buffer at 0xcf50bca0
 xmat romfs process failed.
 Trying devtype=4 chipsel=0
 Failed to init!
 Trying devtype=4 chipsel=1
 reading z.boot0 (vzx=0xbbd0bcbc) is 0x00080000
 Not a valid ROMFS
-ROMFS found at 0x0x01740000, Volume name = YAMON_XLOAD
+
 Found.
-Processing yamon-xload.zbf (start: 0x01740080, size: 0x0002f354)
+ROMFS found at 0x0x01740000, Volume name = MIPSLINUX_XLOAD
 Found 1 file(s) to be processed in ROMFS.
 Processing vmlinux_xload.zbf (start: 0x01740090, size: 0x00322e54)
   Checking zboot file signature .. OK.
-src_addr = 0x017400a0, dest addr = 0x01f40000
+
-XLOADING src=0x817400a0, dest=0x81f40000, size=0x0002f334
+
 src_addr = 0x017400b0, dest addr = 0x01f40000
 XLOADING src=0x817400b0, dest=0x81f40000, size=0x00322e34
-  Decompressing to 0x85200000 .. OK (356240/0x56f90).
+
 xload.c:87: XLOAD done, status = 0x6.
-Execute at 0x85200000 ..
+  Decompressing to 0x84000000 .. OK (5993870/0x5b758e).
   Load time total 0/0 msec.
-CS 0 vendor id 0xec.......
+Execute at 0x8447c000 ..
-CS 0 device id 0xda.......
+Linux version 2.6.22.19-29-4 (release@TP-SERVER2) (gcc version 4.3.2 (Sourcery G++ Lite 4.3-51) ) #8 PREEMPT Wed Dec 14 14:35:16 CST 2011
-................................................................................................................................................................................................................................................................doing Super block Sanity checks... location 4
+Physical map 0xc0000000 to 0x04000000, max remap/kernel size: 0x0c000000/0x18000000.
-doing Managment block Sanity checks ...
+Configured for SMP865x/867x, detected SMP8654 (revision unknown).
 Detected CPU/System/DSP Frequencies: 499.50/333.00/333.00MHz
 SMP86xx Enabled Devices under Linux/XENV 0xcfd0bcbc = 0x001b3efc
  PCIHost Ethernet Ethernet1 IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SATA SCARD SCARD1
 CPU revision is: 0001937c
 FPU revision is: 01739300
 Determined physical RAM map:
-**********************************
+ memory: 05000000 @ 04000000 (usable)
-* YAMON ROM Monitor
+Modified physical map 0xc0000000 to 0x04000000, max remap/kernel size: 0x10000000/0x18000000.
-* Revision 02.13-SIGMADESIGNS-24-R2.13-17
+User-defined physical RAM map:
-**********************************
+ memory: 0c800000 @ 04000000 (usable)
-Memory:  code: 0x86000000-0x86060000, 0x85200000-0x85204000
+Wasting 131072 bytes for tracking 4096 unused pages
-reserved data: 0x86200000-0x86300000, 0x86700000-0x87000000
+Initrd not found or empty - disabling initrd
-PCI memory: 0x86300000-0x86700000
+On node 0 totalpages: 16896
   DMA zone: 33 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 16863 pages, LIFO batch:3
-NAND FLASH Driver Version [ S I G M  1.0.6 ] on CS 0
+  Normal zone: 0 pages used for memmap
 Built 1 zonelists.  Total pages: 16863
-!! No NAND hardware found on CS 1 !!
+Kernel command line: console=ttyS0 mem=200M
 Primary instruction cache 32kB, 4-way, physically tagged, linesize 32 bytes.
 Primary data cache 32kB, 4-way, physically tagged, no aliases, linesize 32 bytes
-Environment variable 'start' exists. After 2 seconds
+Synthesized TLB refill handler (20 instructions).
-it will be interpreted as a YAMON command and executed.
+Synthesized TLB load handler fastpath (32 instructions).
-Press Ctrl-C (or do BREAK) to bypass this.
+Synthesized TLB store handler fastpath (32 instructions).
 Synthesized TLB modify handler fastpath (31 instructions).
-*** smp86xx_recover V1.0.4. Starting (15:40:47-06.03.2012)...
+Cache parity protection disabled
-to 0x00100000
+PID hash table entries: 2048 (order: 11, 8192 bytes)
-doing Super block Sanity checks... location 4
+Using 249.750 MHz high precision timer.
-doing Managment block Sanity checks ...
+Console: colour dummy device 80x25
 Dentry cache hash table entries: 65536 (order: 4, 262144 bytes)
-NAND has already been formated and data will be lost in this process !!!
+Inode-cache hash table entries: 32768 (order: 3, 131072 bytes)
-Eraseing data block ...............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
+Memory: 197120k/204800k available (3775k kernel code, 7568k reserved, 800k data, 1264k init, 0k highmem)
- Erasing dirty blocks.. !!!
+Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976)
-.Dirty block found 4
+Mount-cache hash table entries: 2048
-.Dirty block found 5
+NET: Registered protocol family 16
-.........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Dirty block found 766
+PCI: Initializing SMP86xx PCI host controller
-................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Dirty block found 1614
+PCI: Remapped PCI I/O space 0x58000000 to 0xc0000000, size 64 kB
-.Dirty block found 1615
+PCI: Remapped PCI config space 0x50000000 to 0xc0018000, size 10 kB
-................................................................................................................................................................................................................................................................................................................................................................................................................................................
+PCI: Configured SMP86xx as PCI slave with 1024MB PCI memory
- ret 0 Eraseing management block ....1492.1493.1494.1495.1496.1497.1498.1499.1500.1501.1502.1503.1504.1505.1506.1507.1508.1509.1510.1511.1512.1513.1514.1515.1516.1517.1518.1519.1520.1521.1522.1523.1524.1525.1526.1527.1528.1529.1530.1531.1532.1533.1534.1535.1536.1537.1538.1539.1540.1541.1542.1543.1544.1545.1546.1547.1548.1549.1550.1551.1552.1553.1554.1555.1556.1557.1558.1559.1560.1561.1562.1563.1564.1565.1566.1567.1568.1569.1570.1571.1572.1573.1574.1575.1576.1577.1578.1579.1580.1581.1582.1583.1584.1585.1586.1587.1588.1589.1590.1591.1592.1593.1594.1595.1596.1597.1598.1599.1600.1601.1602.1603.1604.1605.1606.1607.1608.1609.1610.1611.1612.1613.1614.1615.1616.1617.1618.1619.1620.1621.1622.1623.1624.1625.1626.1627.1628.1629.1630.1631.1632.1633.1634.1635.1636.1637.1638.1639.1640.1641.1642.1643.1644.1645.1646.1647.1648.1649.1650.1651.1652.1653.1654.1655.1656.1657.1658.1659.1660.1661.1662.1663.1664.1665.1666.1667.1668.1669.1670.1671.1672.1673.1674.1675.1676.1677.1678.1679.1680.1681.1682.1683.1684.1685.1686.1687.1688.1689.1690.1691.1692.1693.1694.1695.1696.1697.1698.1699.1700.1701.1702.1703.1704.1705.1706.1707.1708.1709.1710.1711.1712.1713.1714.1715.1716.1717.1718.1719.1720.1721.1722.1723.1724.1725.1726.1727.1728.1729.1730.1731.1732.1733.1734.1735.1736.1737.1738.1739.1740.1741.1742.1743.1744.1745.1746.1747
+PCI: Region size is 131072KB
- ret 0 Eraseing super block ....4.5
+PCI: Map DMA memory 0x04000000-0x10800000 for PCI at 0x48000000
- ret 0 creating super block and management block.....169: is bad
+SCSI subsystem initialized
-315: is bad
+libata version 2.21 loaded.
-2034: is bad
+usbcore: registered new interface driver usbfs
-old format found, NAND lib is conerting the old to new format....
+usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
 NET: Registered protocol family 2
-format process is completed.....
+Time: TANGOX clocksource has been installed.
 IP route cache hash table entries: 4096 (order: 0, 16384 bytes)
----------------- NAND Info ----------------------------
+TCP established hash table entries: 16384 (order: 3, 131072 bytes)
 TCP bind hash table entries: 16384 (order: 2, 65536 bytes)
-Size of NAND flash memory: 267911168 bytes
+TCP: Hash tables configured (established 16384 bind 16384)
-The size of block: 131072 bytes
+TCP reno registered
-The total Number of physical blocks: 2048
+cp0_timer: interrupt registered.
-The total number of logical blocks: 1720
+squashfs: version 3.4 (2008/08/26) Phillip Lougher
-The number of used logical blocks: 0
+NTFS driver 2.1.28 [Flags: R/O].
-The number of available logical blocks: 1720 (225443840 bytes)
+fuse init (API version 7.8)
-- Reading data #1:
+io scheduler noop registered
-Reset timed out on port 0.
+io scheduler anticipatory registered
-Reset timed out on port 0.
+io scheduler deadline registered
-Reset timed out on port 0.
+io scheduler cfq registered (default)
-Reset timed out on port 0.
+console_peek registed.
 tango3dog: Hardware Watchdog Timer for SMP864x/SMP865x 0.1 (def. timeout: 30 sec)
 Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
 serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
 serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
 loop: module loaded
 tun: Universal TUN/TAP device driver, 1.6
 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
 tangox_enet0: unable to autodetect phy
 tangox_enet1: unable to autodetect phy
 ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
 ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
 usbcore: registered new interface driver asix
 usbcore: registered new interface driver cdc_ether
 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 tangox_bmide: bmide support is disabled
 k_name=Tangox SATA 0 driver=Tangox SATA 0
 SATA version 0x3139302a ID 0x0 is detected
 scsi0 : Tangox SATA 0
 ata1: SATA max UDMA/133 cmd 0xa0023000 ctl 0xa0023020 bmdma 0xcdcdcdcd irq 49
 ata1: SATA link down (SStatus 0 SControl 10)
 k_name=Tangox SATA 1 driver=Tangox SATA 1
 SATA version 0x3139302a ID 0x0 is detected
 scsi1 : Tangox SATA 0
 ata2: SATA max UDMA/133 cmd 0xa0023800 ctl 0xa0023820 bmdma 0xcdcdcdcd irq 62
 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
 ata2.00: ATA-8: WDC WD10TPVT-00U4RT1, 01.01A01, max UDMA/133
 ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
 ata2.00: configured for UDMA/133
 scsi 1:0:0:0: Direct-Access     ATA      WDC WD10TPVT-00U 01.0 PQ: 0 ANSI: 5
 ata2: dev 0 max request 256 sectors (lba48)
 sd 1:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
 sd 1:0:0:0: [sda] Write Protect is off
 sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sd 1:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
 sd 1:0:0:0: [sda] Write Protect is off
 sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  sda: sda1
 sd 1:0:0:0: [sda] Attached SCSI disk
 sd 1:0:0:0: Attached scsi generic sg0 type 0
 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
 USB Universal Host Controller Interface driver v3.0
 driver tangox-ehci-hcd, 10 Dec 2004
 TangoX USB initializing...
 tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
 tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
 tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021400
 tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
 usb usb1: configuration #1 chosen from 1 choice
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 2 ports detected
 tangox-ohci-hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
 TangoX USB was initialized.
 Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
 tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
 tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
 tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
 usb usb2: configuration #1 chosen from 1 choice
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 2 ports detected
 Initializing USB Mass Storage driver...
 usbcore: registered new interface driver usb-storage
 USB Mass Storage support registered.
 Not supported chip.
 mice: PS/2 mouse device common for all mice
 usbcore: registered new interface driver hiddev
 usbcore: registered new interface driver usbhid
 drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
 Netfilter messages via NETLINK v0.30.
 IPv4 over IPv4 tunneling driver
 ip_tables: (C) 2000-2006 Netfilter Core Team
 TCP cubic registered
 NET: Registered protocol family 1
 NET: Registered protocol family 17
 NET: Registered protocol family 5
 ieee80211: 802.11 data/management/control stack, git-1.1.13
 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
 ieee80211_crypt: registered algorithm 'NULL'
 Freeing unused kernel memory: 1264k freed
 ==================PRIMARY SYSTEM============================
 export SYSCONF_BUILD_DATE=2011.12.14-1420
 export SYSCONF_BUILD_VERSION=3.01.19
 export SYSCONF_NAND_DRIVER=LEGACY
 export SYSCONF_FIRMWARE_BIN=wdtvlivehub.bin
 export SYSCONF_FIsigmablock: module license 'Proprietary' taints kernel.
 RMWARE_VER=wdtvlivehub.ver
 export SYSCONF_BOOTLOADER_MTD_PARTIT
 CS 0 vendor id 0x20.......
 ION=/dev/sigmbloCS 0 device id 0xda.......
 cka
 export SYSCONF_KERNEL_MTD_P.ARTITION=/dev/si.gmblockd
 export. SYSCONF_FIRMWAR.E_MTD_PARTITION=./dev/sigmblockh
 .
 export SYSCONF_.FIRMWARE_MTD_SIZ.E=96468992
 expo.rt SYSCONF_FIRMW.ARE_STORAGE_PART.ITION=/dev/sigmb.locki
 export SY.SCONF_STORAGE_PA.RTITION_SIZE=964.68992
 export SY.SCONF_BOOT_AUTH=.y
 export SYSCON.F_FIRMWARE_FS=sq.uashfs
 ========.================.================.================.====
 
 Primary .built date: 2011..12.14-1420
 
 .......................................................................................................................................................................................................................................
 
 ********************** Parition configureations for CS 0 *******************
 **** parition 1  offset [0x00000000] + size [0x00080000] = [0x00080000] ****
 **** parition 2  offset [0x00080000] + size [0x00040000] = [0x000c0000] ****
 **** parition 3  offset [0x000c0000] + size [0x00400000] = [0x004c0000] ****
 **** parition 4  offset [0x004c0000] + size [0x00400000] = [0x008c0000] ****
 **** parition 5  offset [0x008c0000] + size [0x00800000] = [0x010c0000] ****
 **** parition 6  offset [0x010c0000] + size [0x00800000] = [0x018c0000] ****
 **** parition 7  offset [0x018c0000] + size [0x05c00000] = [0x074c0000] ****
 **** parition 8  offset [0x074c0000] + size [0x05c00000] = [0x0d0c0000] ****
 **** parition 9  offset [0x0d0c0000] + size [0x00100000] = [0x0d1c0000] ****
 **** parition 10  offset [0x0d1c0000] + size [0x00100000] = [0x0d2c0000] ****
 **** parition 11  offset [0x0d2c0000] + size [0x00020000] = [0x0d2e0000] ****
 chip_index 0 pos 0
 
 CS 1 vendor id 0x00.......
 CS 1 device id 0x00.......
 nand_probe Error on chip 1 ret code -13
 4+0 records in
 4+0 records out
 SYSCONF_FIRMWARE_MTD_PARTITION = /dev/sigmblockh
 FW_SIGN = 
 4+0 records in
 4+0 records out
 STORAGE_SIGN = 
 Launch mdev for checking firmware in USB storage...
 ufsd: driver 8.5 (Dec  6 2011 23:23:20) LBD=ON with ioctl loaded at c0104000
 NTFS support included
 Hfs+/HfsX support included
 Built_for__Alfanetworks_wdtv_live_plus_2011-07-13
 
 /dev/sda1 sleep 4 seconds...
 /dev/sda1 sleep 4 seconds... done
 mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument
 mount  /dev/sda1  on  /mnt/sda1ufsd: default nls iso8859-1
   with  vfat  failed0:  255
 mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument
 mount  /dev/sda1  on  /mnt/sda1  with  ufsd  failed1:  255
 mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument
 mount  /dev/sda1  on  /mnt/sda1  with  msdos  failed2:  255
 mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument
 mount  /dev/sda1  on  /mnt/sda1  with  ntfs  failed3:  255
 mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument
 mount  /dev/sda1  on  /mnt/sda1  with  ext2  failed4:  255
 mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument
 mount  /dev/sda1  on  /mnt/sda1  with  ext3  failed5:  255
 mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument
 mount  /dev/sda1  on  /mnt/sda1  with  hfs  failed6:  255
 mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument
 mount /dev/sda1  failed..
 find_firmware on /dev/sda1  done..
 mknod: /dev/ttyS0: File exists
 /dev/sda sleep 1 seconds...
 /dev/sda sleep 1 seconds... done
 mount: mounting /dev/sda on /mnt/sda failed: Invalid argument
 mount  /dev/sda  on  /mnt/sda  with  vfat  failed1:  255
 mount: mounting /dev/sda on /mnt/sda failed: Invalid argument
 mount  /dev/sda  on  /mnt/sda  with  msdos  failed2:  255
 mount: mounting /dev/sda on /mnt/sda failed: Invalid argument
 mount  /dev/sda  on  /mnt/sda  with  ntfs  failed3:  255
 mount: mounting /dev/sda on /mnt/sda failed: Invalid argument
 mount  /dev/sda  on  /mnt/sda  with  ext2  failed4:  255
 mount: mounting /dev/sda on /mnt/sda failed: Invalid argument
 mount  /dev/sda  on  /mnt/sda  with  hfs  failed6:  255
 mount: mounting /dev/sda on /mnt/sda failed: Invalid argument
 mount /dev/sda  failed..
 find_firmware on /dev/sda  done..