API tools faq
paste
View difference between Paste ID: fYvbYDvZ and da9xF1Ec
SHOW: | | - or go back to the newest paste.
1-
<6>[    5.357363] msm8660_i2s_hw_params Codec Clock 0xc0c45b90 ; Rx Bit Clock c0
1+
<6>[    0.000000] Booting Linux on physical CPU 0
2
<6>[    0.000000] Initializing cgroup subsys cpu
3-
<6>[    5.357393] tabla_hw_params: dai_name = tabla_i2s_rx1 DAI-ID 1 rate 48000
3+
<5>[    0.000000] Linux version 3.4.38-KT747-gc901b84 (ktoonsez@ktoonsez-Virtual
4
Box) (gcc version 4.7.3 20130205 (prerelease) (Linaro GCC 4.7-2013.02-01) ) #1 S
5-
<6>[    5.501541] pil pil2: modem_fw: Brought out of reset
5+
MP PREEMPT Sun Mar 31 08:50:50 MST 2013
6-
<6>[    6.261132] msm_ta_detect_work: USB exit ta detection - frindex
6+
<4>[    0.000000] CPU: ARMv7 Processor [511f04d0] revision 0 (ARMv7), cr=10c5387
7-
<6>[    6.771097] msmsdcc_runtime_suspend: Enter WIFI suspend
7+
d
8-
<3>[    7.742163] accel_open_calibration: Can't open calibration file
8+
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cach
9-
<6>[    7.748908] Sensors unset: 32767
9+
e
10-
<6>[    8.101266] pil pil1: modem: Brought out of reset
10+
<4>[    0.000000] Machine: SAMSUNG M2_VZW
11-
<6>[    8.244346] light_enable_store,new_value=1
11+
<2>[    0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical addr
12-
<6>[    8.481519] proximity_enable_store,new_value=1, prox_cal 0
12+
ess space
13-
<6>[    8.501236] EXT4-fs (mmcblk0p14): re-mounted. Opts: nobarrier,data=ordered
13+
<6>[    0.000000] memory pool 3 (start f92ff000 size 6d00000) initialized
14
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
15-
<6>[    8.622524] light_enable_store,new_value=0
15+
<3>[    0.000000] smem_find(137, 80): wrong size 72
16-
<6>[    8.623134] proximity_enable_store,new_value=0, prox_cal 0
16+
<6>[    0.000000] socinfo_init: v6, id=87, ver=3.1, raw_id=1713, raw_ver=4, hw_p
17-
<3>[    8.831222] Notify: smsm init
17+
lat=1,  hw_plat_ver=65536
18-
<6>[    9.431191] msm8960_i2s_shutdown Codec Clock 0xc0c45b90 ; Rx Bit Clock c0c
18+
<6>[    0.000000]  accessory_chip=0 hw_plat_subtype=0
19
<7>[    0.000000] On node 0 totalpages: 428543
20-
<3>[    9.435586] store_afe_cal: offset 1092260008 is > mem_len 344064
20+
<7>[    0.000000] free_area_init_node: node 0, pgdat c0d06500, node_mem_map c135
21-
<6>[    9.444864] msm8960_i2s_startup
21+
d000
22-
<6>[    9.444925] msm8660_i2s_hw_params Codec Clock 0xc0c45b90 ; Rx Bit Clock c0
22+
<7>[    0.000000]   Normal zone: 1722 pages used for memmap
23
<7>[    0.000000]   Normal zone: 0 pages reserved
24-
<6>[    9.444956] tabla_hw_params: dai_name = tabla_i2s_rx1 DAI-ID 1 rate 48000
24+
<7>[    0.000000]   Normal zone: 165702 pages, LIFO batch:31
25
<7>[    0.000000]   HighMem zone: 2370 pages used for memmap
26-
<6>[    9.452159] msm8960_i2s_shutdown Codec Clock 0xc0c45b90 ; Rx Bit Clock c0c
26+
<7>[    0.000000]   HighMem zone: 258749 pages, LIFO batch:31
27
<6>[    0.000000] allocating 11304960 bytes at c2363000 (82563000 physical) for
28-
<3>[    9.895803] diag: proc 0, msg mask update fail -12, tried 419
28+
fb
29-
<6>[   10.671265] apr_tal:Modem Is Up
29+
<6>[    0.000000] Initialized persistent memory from 9fde0000-9fdfffff
30-
<6>[   11.366122] sps:BAM 0x124c2000 is registered.
30+
<6>[    0.000000] PERCPU: Embedded 10 pages/cpu @c2e2e000 s17344 r8192 d15424 u4
31-
<6>[   11.366274] sps:BAM 0x124c2000 enabled: ver:0x5, number of pipes:6
31+
0960
32-
<6>[   18.616297] request_suspend_state: wakeup (3->0) at 18615281723 (2013-03-3
32+
<7>[    0.000000] pcpu-alloc: s17344 r8192 d15424 u40960 alloc=10*4096
33-
1 21:29:58.229971682 UTC)
33+
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
34-
<6>[   18.665008] TIMERIRQ_START : period=70
34+
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
35-
<6>[   18.665099] Sensors set: 112
35+
pages: 424451
36-
<6>[   18.668457] <6>MPL-accmpu6050_set_odr:69
36+
<5>[    0.000000] Kernel command line: console = null androidboot.hardware=qcom
37-
<6>[   18.668579] <6>MPL-accODR : 14285 (69)mHz
37+
user_debug=31 zcache sec_log=0x80000@0x88d00008 sec_dbg=0x40000@0x88d90004 sec_d
38-
<4>[   18.766000] lowmem_shrink: convert oom_adj to oom_score_adj:
38+
ebug.reset_reason=0x1a2b3c00 etb_buf=0x4000@0x8fffb9c0 androidboot.debug_level=0
39-
<4>[   18.766030] oom_adj 0 => oom_score_adj 0
39+
x4f4c sec_debug.enable=0 sec_debug.enable_user=0 cordon=62cb75058d945d49abe54d2c
40-
<4>[   18.766030] oom_adj 1 => oom_score_adj 58
40+
aede615a loglevel=4 samsung.hardware=SCH-I535 androidboot.emmc_checksum=3 androi
41-
<4>[   18.766030] oom_adj 2 => oom_score_adj 117
41+
dboot.bootloader=I535VRALE6 androidboot.nvdata_backup=1 androidboot.boot_recover
42-
<4>[   18.766061] oom_adj 4 => oom_score_adj 235
42+
y=0 level=0x574f4c44 androidboot.emmc=true androidboot.serialno=1c0500f0 android
43-
<4>[   18.766061] oom_adj 9 => oom_score_adj 529
43+
boot.baseband=msm
44-
<4>[   18.766061] oom_adj 15 => oom_score_adj 1000
44+
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
45-
<4>[   18.900656] wifi_set_power = 1
45+
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 byte
46-
<6>[   18.900656] ------------------------------------------------
46+
s)
47-
<6>[   18.900656] ------------------------------------------------
47+
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
48-
<6>[   18.900656] brcm_wlan_power Enter: power on
48+
49-
<4>[   18.900686] wifi_set_carddetect = 1

49+
<6>[    0.000000] Memory: 139MB 5MB 510MB 1019MB = 1673MB total

50-
<6>[   18.900717] msmsdcc_runtime_resume: Enter WIFI resume

50+
<5>[    0.000000] Memory: 1670140k/1670140k available, 312320k reserved, 1044476

51-
<6>[   18.925682] zcache: created ephemeral tmem pool, id=6, client=65535

51+
K highmem

52-
<6>[   18.925774] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (nul

52+
<5>[    0.000000] Virtual kernel memory layout:

53
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

54-
<4>[   18.972318] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)

54+
<5>[    0.000000]     timers  : 0xfffef000 - 0xffff0000   (   4 kB)

55-
<4>[   18.975064] mmc2: queuing unknown CIS tuple 0x80 (6 bytes)

55+
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

56-
<6>[   18.995971] zcache: created ephemeral tmem pool, id=7, client=65535

56+
<5>[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)

57-
<6>[   18.996001] EXT4-fs (dm-0): re-mounted. Opts: (null)

57+
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)

58-
<6>[   19.003357] EXT4-fs (dm-0): re-mounted. Opts: (null)

58+
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

59-
<6>[   19.048100] mmc2: new ultra high speed SDR12 SDIO card at address 0001

59+
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

60-
<4>[   19.049748] alloc static buf at e9300000!

60+
<5>[    0.000000]       .text : 0xc0008000 - 0xc0aec000   (11152 kB)

61-
<4>[   19.050358] dhdsdio_probe : no mutex held. set lock

61+
<5>[    0.000000]       .init : 0xc0b00000 - 0xc0c043c0   (1041 kB)

62-
<4>[   19.050572] F1 signature read @0x18000000=0x16034334

62+
<5>[    0.000000]       .data : 0xc0c06000 - 0xc0d0e1d0   (1057 kB)

63-
<4>[   19.057012] DHD: dongle ram size is set to 524288(orig 524288)

63+
<5>[    0.000000]        .bss : 0xc0d0e210 - 0xc0fbd19c   (2748 kB)

64-
<4>[   19.058080] CHIP VER = [0x3]

64+
<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2

65-
<4>[   19.058080] ----- CHIP bcm4334_B2 -----

65+
, Nodes=1

66-
<4>[   19.059240] wl_create_event_handler thr:6cb created

66+
<6>[    0.000000] Preemptible hierarchical RCU implementation.

67-
<6>[   19.059240] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xe7041564

67+
<6>[    0.000000]       RCU dyntick-idle grace-period acceleration is enabled.

68
<6>[    0.000000] NR_IRQS:921

69-
<4>[   19.063360] p2p0: P2P Interface Registered

69+
<6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every

70-
<4>[   19.063451] dhd_attach thr:6cc created

70+
 131084001ms

71-
<4>[   19.063512] dhd_attach thr:6cd created

71+
<6>[    0.000000] Switching to timer-based delay loop

72-
<4>[   19.063573] dhd_attach thr:6ce created

72+
<6>[    0.000000] Console: colour dummy device 80x30

73-
<6>[   19.080970] zcache: created ephemeral tmem pool, id=8, client=65535

73+
<6>[    0.000213] Calibrating delay loop (skipped), value calculated using timer

74-
<6>[   19.081092] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (nul

74+
 frequency.. 13.50 BogoMIPS (lpj=67500)

75
<6>[    0.000244] pid_max: default: 32768 minimum: 301

76-
<6>[   19.096139] zcache: created ephemeral tmem pool, id=9, client=65535

76+
<6>[    0.000579] Mount-cache hash table entries: 512

77-
<6>[   19.096261] EXT4-fs (dm-1): re-mounted. Opts: (null)

77+
<6>[    0.001922] Initializing cgroup subsys debug

78-
<6>[   19.126506] EXT4-fs (dm-1): re-mounted. Opts: (null)

78+
<6>[    0.001953] Initializing cgroup subsys cpuacct

79-
<4>[   19.169723] dhdsdio_write_vars: Download, Upload and compare of NVRAM succ

79+
<6>[    0.001983] Initializing cgroup subsys freezer

80
<6>[    0.002044] CPU: Testing write buffer coherency: ok

81-
<6>[   19.212665] zcache: created ephemeral tmem pool, id=10, client=65535

81+
<6>[    0.002105] ftrace: allocating 29917 entries in 88 pages

82-
<6>[   19.212757] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (nul

82+
<4>[    0.031985] ------------[ cut here ]------------

83
<4>[    0.032015] WARNING: at kernel/trace/ftrace.c:1590 ftrace_bug+0xec/0x174()

84-
<6>[   19.251609] zcache: created ephemeral tmem pool, id=11, client=65535

84+
85-
<6>[   19.251670] EXT4-fs (dm-2): re-mounted. Opts: (null)

85+
<4>[    0.032046] Modules linked in:

86-
<6>[   19.260857] EXT4-fs (dm-2): re-mounted. Opts: (null)

86+
<4>[    0.032046] Backtrace:

87-
<6>[   19.338013] zcache: created ephemeral tmem pool, id=12, client=65535

87+
<4>[    0.032076] [<c0012c94>] (dump_backtrace+0x0/0x114) from [<c079c550>] (dum

88-
<6>[   19.338104] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (nul

88+
p_stack+0x20/0x24)

89
<4>[    0.032107]  r6:c00e18c0 r5:00000009 r4:00000000 r3:271ae93a

90-
<6>[   19.350068] zcache: created ephemeral tmem pool, id=13, client=65535

90+
<4>[    0.032137] [<c079c530>] (dump_stack+0x0/0x24) from [<c0077240>] (warn_slo

91-
<6>[   19.350129] EXT4-fs (dm-3): re-mounted. Opts: (null)

91+
wpath_common+0x5c/0x74)

92-
<6>[   19.380344] EXT4-fs (dm-3): re-mounted. Opts: (null)

92+
<4>[    0.032168] [<c00771e4>] (warn_slowpath_common+0x0/0x74) from [<c0077284>]

93-
<4>[   19.387822] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)

93+
 (warn_slowpath_null+0x2c/0x34)

94-
<4>[   19.391271] dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23

94+
<4>[    0.032198]  r8:60000113 r7:0000108f r6:00000000 r5:c01035ac r4:c0d09f88

95-
<4>[   19.392186] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79

95+
<4>[    0.032229] r3:00000009

96-
<4>[   19.394811] Firmware up: op_mode=0x0015, Broadcom Dongle Host Driver mac=3

96+
<4>[    0.032260] [<c0077258>] (warn_slowpath_null+0x0/0x34) from [<c00e18c0>] (

97
ftrace_bug+0xec/0x174)

98-
<4>[   19.397436] POWER_VAL = 1

98+
<4>[    0.032290] [<c00e17d4>] (ftrace_bug+0x0/0x174) from [<c00e1cf8>] (ftrace_

99-
<4>[   19.406317] Firmware version = wl0: Sep 11 2012 12:06:01 version 6.10.58.7

99+
process_locs+0x3b0/0x500)

100
<4>[    0.032290]  r5:e9102b40 r4:00000000

101-
<4>[   19.406348] dhd_net_attach: ifidx 0

101+
<4>[    0.032321] [<c00e1948>] (ftrace_process_locs+0x0/0x500) from [<c0b14b18>]

102-
<4>[   19.411506] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 3

102+
 (ftrace_init+0x98/0x1ac)

103
<4>[    0.032382] [<c0b14a80>] (ftrace_init+0x0/0x1ac) from [<c0b00930>] (start_

104-
<4>[   19.411506] dhdsdio_probe : the lock is released.

104+
kernel+0x3a0/0x404)

105-
<4>[   19.411841]

105+
<4>[    0.032382]  r7:c0c3551c r6:c2e2b240 r5:c0b412fc r4:c0c2cbf8

106-
<4>[   19.411841] Dongle Host Driver, version 1.28.13.1 (r)

106+
<4>[    0.032443] [<c0b00590>] (start_kernel+0x0/0x404) from [<8020803c>] (0x802

107-
<4>[   19.411841] Compiled in drivers/net/wireless/bcmdhd on Mar 31 2013 at 08:5

107+
0803c)

108
<4>[    0.032443]  r6:c0b412f8 r5:c0c2b118 r4:10c5387d

109-
<6>[   19.469311] zcache: created ephemeral tmem pool, id=14, client=65535

109+
<4>[    0.032504] ---[ end trace da227214a82491b7 ]---

110-
<6>[   19.469372] EXT4-fs (dm-4): mounted filesystem without journal. Opts: (nul

110+
<6>[    0.032534] ftrace faulted on writing [<c01035ac>] rb_free_work+0x10/0x64

111
<6>[    0.032839] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

112-
<6>[   19.516099] zcache: created ephemeral tmem pool, id=15, client=65535

112+
<6>[    0.032870] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters

113-
<6>[   19.516160] EXT4-fs (dm-4): re-mounted. Opts: (null)

113+
 available

114-
<4>[   19.520799] dhd_open: Enter, net[e7040800]

114+
<6>[    0.032962] Setting up static identity map for 0x809ab4f0 - 0x809ab578

115-
<4>[   19.520799] CHIP VER = [0x3]

115+
<6>[    0.036136] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

116-
<4>[   19.520830] ----- CHIP bcm4334_B2 -----

116+
<6>[    0.036471] Brought up 2 CPUs

117-
<4>[   19.520830]

117+
<6>[    0.036502] SMP: Total of 2 processors activated (27.00 BogoMIPS).

118-
<4>[   19.520830] Dongle Host Driver, version 1.28.13.1 (r)

118+
<6>[    0.055760] dummy:

119-
<4>[   19.520830] Compiled in drivers/net/wireless/bcmdhd on Mar 31 2013 at 08:5

119+
<6>[    0.056279] NET: Registered protocol family 16

120
<3>[    0.057958] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver

121-
<6>[   19.532305] CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=3

121+
<6>[    0.061376] persistent_ram: found existing buffer, size 13612, start 13612

122
123-
<6>[   19.543934] EXT4-fs (dm-4): re-mounted. Opts: (null)

123+
<6>[    0.109018] console [ram0] enabled

124-
<6>[   19.639157] zcache: pool creation failed: max exceeded

124+
<6>[    0.109049] meminfo_init: smem ram ptable found: ver: 0 len: 6

125-
<6>[   19.639218] EXT4-fs (dm-5): mounted filesystem without journal. Opts: (nul

125+
<6>[    0.109049] Found 2 memory banks grouped into 16 memory regions

126
<6>[    0.109293] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio

127-
<6>[   19.652586] zcache: pool creation failed: max exceeded

127+
<6>[    0.110209] msm_rpm_init: RPM firmware 3.0.16843271

128-
<6>[   19.652647] EXT4-fs (dm-5): re-mounted. Opts: (null)

128+
<3>[    0.134167] msm_rpm_get_status(): Status id 433 not defined for target

129-
<6>[   19.664703] EXT4-fs (dm-5): re-mounted. Opts: (null)

129+
<3>[    0.134350] msm_rpm_get_status(): Status id 433 not defined for target

130-
<6>[   19.766946] zcache: pool creation failed: max exceeded

130+
<3>[    0.134442] msm_rpm_get_status(): Status id 433 not defined for target

131-
<6>[   19.767037] EXT4-fs (dm-6): mounted filesystem without journal. Opts: (nul

131+
<3>[    0.134625] msm_rpm_get_status(): Status id 433 not defined for target

132
<3>[    0.134716] msm_rpm_get_status(): Status id 433 not defined for target

133-
<6>[   19.787883] zcache: pool creation failed: max exceeded

133+
<3>[    0.134900] msm_rpm_get_status(): Status id 433 not defined for target

134-
<6>[   19.787913] EXT4-fs (dm-6): re-mounted. Opts: (null)

134+
<3>[    0.135083] msm_rpm_get_status(): Status id 433 not defined for target

135-
<6>[   19.794964] EXT4-fs (dm-6): re-mounted. Opts: (null)

135+
<3>[    0.135205] msm_rpm_get_status(): Status id 433 not defined for target

136-
<6>[   19.880848] zcache: pool creation failed: max exceeded

136+
<3>[    0.156050] msm_gpiomux_install: write failure: -14

137-
<6>[   19.880940] EXT4-fs (dm-7): mounted filesystem without journal. Opts: (nul

137+
<3>[    0.156142] msm_gpiomux_install: write failure: -14

138
<3>[    0.156325] msm_gpiomux_install: write failure: -14

139-
<6>[   20.028719] zcache: pool creation failed: max exceeded

139+
<3>[    0.156416] msm_gpiomux_install: write failure: -14

140-
<6>[   20.028750] EXT4-fs (dm-7): re-mounted. Opts: (null)

140+
<6>[    0.159560] saw_probe: id=0, name=8921_s5

141-
<6>[   20.035586] EXT4-fs (dm-7): re-mounted. Opts: (null)

141+
<6>[    0.159987] saw_probe: id=1, name=8921_s6

142-
<6>[   20.120280] zcache: pool creation failed: max exceeded

142+
<6>[    0.160415] gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext

143-
<6>[   20.120341] EXT4-fs (dm-8): mounted filesystem without journal. Opts: (nul

143+
_5v_en

144
<6>[    0.160689] pm8921_probe: PMIC revision 1: F4

145-
<6>[   20.129772] zcache: pool creation failed: max exceeded

145+
<6>[    0.160720] pm8921_probe: PMIC revision 2: 06

146-
<6>[   20.129803] EXT4-fs (dm-8): re-mounted. Opts: (null)

146+
<6>[    0.160720] pm8921_probe: PMIC version: PM8921 rev 3.0

147-
<6>[   20.159346] EXT4-fs (dm-8): re-mounted. Opts: (null)

147+
<6>[    0.160750] pm8921_probe: PMIC Restart Reason: Triggered from CHG (usb cha

148-
<4>[   20.212696] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, ret = -17

148+
rger insertion)

149-
<6>[   20.245994] zcache: pool creation failed: max exceeded

149+
<6>[    0.162185] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio

150-
<6>[   20.246085] EXT4-fs (dm-9): mounted filesystem without journal. Opts: (nul

150+
<6>[    0.162734] pm_gpio_probe: OK: base=152, ngpio=44

151
<6>[    0.163039] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mp

152-
<6>[   20.280421] zcache: pool creation failed: max exceeded

152+
p

153-
<6>[   20.280573] EXT4-fs (dm-9): re-mounted. Opts: (null)

153+
<6>[    0.163131] pm8xxx_mpp_probe: OK: base=196, ngpio=12

154-
<4>[   20.280634] wl_bss_connect_done succeeded with 00:92:38

154+
<6>[    0.168869] gpio_vreg_probe: id=193, name=ext_otg_sw, gpio=193, gpio_label

155-
<6>[   20.315244] EXT4-fs (dm-9): re-mounted. Opts: (null)

155+
=ext_otg_sw_en

156-
<4>[   20.359560] wl_bss_connect_done succeeded with 00:92:38

156+
<3>[    0.179368] [msm8960_init_cam:1572]setting done!!

157-
<6>[   20.359591] CFG80211-INFO2) wl_bss_connect_done :  Connected event of conn

157+
<6>[    0.180680] samsung sys class init.

158
<6>[    0.180741] samsung sys class end.

159-
<6>[   20.456371] zcache: pool creation failed: max exceeded

159+
<4>[    0.180772] 8921_lvs6: Failed to create debugfs directory

160-
<6>[   20.456462] EXT4-fs (dm-10): mounted filesystem without journal. Opts: (nu

160+
<6>[    0.181352] tsp 1.8V on is finished.

161
<4>[    0.181382] 8921_l17: Failed to create debugfs directory

162-
<6>[   20.643644] zcache: pool creation failed: max exceeded

162+
<6>[    0.182237] tsp 3.3V on is finished.

163-
<6>[   20.643705] EXT4-fs (dm-10): re-mounted. Opts: (null)

163+
<4>[    0.182328] 8921_l9: Failed to create debugfs directory

164-
<6>[   20.663573] EXT4-fs (dm-10): re-mounted. Opts: (null)

164+
<4>[    0.182359] 8921_lvs4: Failed to create debugfs directory

165-
<6>[   20.747596] zcache: pool creation failed: max exceeded

165+
<6>[    0.194536] samsung_m2_vzw_init : system rev = 15, Secjack Using

166-
<6>[   20.747688] EXT4-fs (dm-11): mounted filesystem without journal. Opts: (nu

166+
<6>[    0.195299] [WIFI] system_rev = 15

167
<6>[    0.195299] brcm_wlan_init: start

168-
<6>[   20.768441] zcache: pool creation failed: max exceeded

168+
<6>[    0.195421] brcm_init_wlan_mem: WIFI MEM Allocated

169-
<6>[   20.768472] EXT4-fs (dm-11): re-mounted. Opts: (null)

169+
<6>[    0.195666] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoi

170-
<6>[   20.790904] EXT4-fs (dm-11): re-mounted. Opts: (null)

170+
nt registers.

171-
<6>[   20.876209] zcache: pool creation failed: max exceeded

171+
<6>[    0.195696] hw-breakpoint: maximum watchpoint size is 8 bytes.

172-
<6>[   20.876300] EXT4-fs (dm-12): mounted filesystem without journal. Opts: (nu

172+
<6>[    0.202227] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20

173
<6>[    0.202227] sps:BAM 0x12244000 is registered.

174-
<6>[   20.937829] zcache: pool creation failed: max exceeded

174+
<6>[    0.202807] sps:sps is ready.

175-
<6>[   20.937829] EXT4-fs (dm-12): re-mounted. Opts: (null)

175+
<6>[    0.236105] bio: create slab <bio-0> at 0

176-
<6>[   20.968533] EXT4-fs (dm-12): re-mounted. Opts: (null)

176+
<6>[    0.236868] MAX8952 loading!!

177-
<6>[   21.359529] acc_open

177+
<6>[    0.237265] ION heap vmalloc created

178-
<6>[   21.359560] acc_release

178+
<6>[    0.237326] ION heap mm created at b0000000 with size 9600000

179-
<6>[   21.693758] bl_level:128,cd:10:Candela:120 aid_change:1

179+
<6>[    0.237387] ION heap mm_fw created at afe00000 with size 1e0000

180-
<6>[   23.334014] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_

180+
<6>[    0.237417] ION heap mfc created at b9600000 with size 2000

181
<6>[    0.237631] ION heap sf created at f9308000 with size 5000000

182-
<6>[   24.191973] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_

182+
<6>[    0.237692] ION heap iommu created

183
<6>[    0.237784] ION heap qsecom created at fe308000 with size 1700000

184-
<6>[   29.588524] mtp_open

184+
<6>[    0.237845] ION heap audio created at ffa08000 with size 4cf000

185-
<7>[   29.721074] p2p0: no IPv6 routers present

185+
<5>[    0.238852] pm8xxx_pwm_probe: OK

186-
<7>[   30.331054] wlan0: no IPv6 routers present

186+
<5>[    0.239584] SCSI subsystem initialized

187-
<6>[   31.282130] max17040_work : VCELL:3668mV, AVGVCELL:3706mV

187+
<6>[    0.239890] usbcore: registered new interface driver usbfs

188-
<6>[   31.282160] max17040_work : Raw SOC:1315%, SOC:11%

188+
<6>[    0.240012] usbcore: registered new interface driver hub

189-
<6>[   31.283106] max17040_work : CONFIG:0x1c85, RATE:0xc704

189+
<6>[    0.240195] usbcore: registered new device driver usb

190-
<6>[   31.283595] max17040_work : STATUS:0xff01, temperature:27

190+
<6>[    0.240653] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-

191-
<6>[   31.293819] max17040 13-0036: 70b7h,4d1ah,0000h,1100h,0000h,1c85h,ffffh,ff

191+
core/pm8xxx-pwrkey/input/input0

192-
ffh,ffffh,ff00h,c704h,077dh,ff01h,ffffh,

192+
<6>[    0.241996] i2c-gpio i2c-gpio.9: using pins 95 (SDA) and 96 (SCL)

193-
<3>[   31.875049] init: no such service 'qosmgrd'

193+
<6>[    0.242301] i2c-gpio i2c-gpio.11: using pins 73 (SDA) and 74 (SCL)

194-
<3>[   31.937921] init: no such service 'mpdecision'

194+
<6>[    0.242575] i2c-gpio i2c-gpio.16: using pins 48 (SDA) and 47 (SCL)

195-
<6>[   33.601831] alarm_set_rtc: Failed to set RTC, time will be lost on reboot

195+
<6>[    0.242972] i2c-gpio i2c-gpio.13: using pins 24 (SDA) and 25 (SCL)

196-
<6>[   34.639279] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

196+
<6>[    0.243308] i2c-gpio i2c-gpio.17: using pins 32 (SDA) and 33 (SCL)

197-
<6>[   35.141706] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

197+
<3>[    0.243491] i2c i2c-14: Invalid 7-bit I2C address 0x00

198-
<6>[   35.141706] sec_bat_monitor_work: battery check is present (1 time )

198+
<3>[    0.243613] i2c i2c-14: Can't create device at 0x00

199-
<6>[   35.143262] [battery] level(11), vcell(3648750), therm(272)

199+
<6>[    0.243888] i2c-gpio i2c-gpio.14: using pins 12 (SDA) and 13 (SCL)

200-
<6>[   35.143262] [battery] cable_type(1), chg_status(1), health(1)

200+
<3>[    0.244193] i2c i2c-19: Failed to register i2c client cmc624 at 0x38 (-16)

201-
<6>[   35.143293] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

201+
202-
<6>[   39.979124] bl_level:117,cd:9:Candela:110 aid_change:0

202+
<3>[    0.244315] i2c i2c-19: Can't create device at 0x38

203-
<6>[   40.026705] bl_level:107,cd:8:Candela:100 aid_change:1

203+
<3>[    0.244895] Error-Bad Function Input

204-
<6>[   40.077857] bl_level:97,cd:7:Candela:90 aid_change:1

204+
<4>[    0.244987] max8952 19-0060: VID0/1 gpio invalid: DVS not available.

205-
<6>[   40.125866] bl_level:87,cd:6:Candela:80 aid_change:1

205+
<3>[    0.245688] max8952 19-0060: DVS modes disabled because VID0 and VID1 do n

206-
<6>[   40.175644] bl_level:77,cd:5:Candela:70 aid_change:1

206+
ot have proper controls.

207-
<6>[   40.225118] bl_level:67,cd:4:Candela:60 aid_change:1

207+
<6>[    0.254845] i2c-gpio i2c-gpio.19: using pins 71 (SDA) and 72 (SCL)

208-
<6>[   40.274958] bl_level:57,cd:3:Candela:50 aid_change:1

208+
<6>[    0.254906] Linux media interface: v0.10

209-
<6>[   40.324828] bl_level:47,cd:2:Candela:40 aid_change:1

209+
<6>[    0.254997] Linux video capture interface: v2.00

210-
<6>[   40.376590] bl_level:37,cd:1:Candela:30 aid_change:1

210+
<6>[    0.256035] Advanced Linux Sound Architecture Driver Version 1.0.25.

211-
<6>[   40.475263] bl_level:18,cd:0:Candela:20 aid_change:1

211+
<6>[    0.256737] Bluetooth: Core ver 2.16

212-
<3>[   40.607843] mdnie [mdnie set] in scenario_store, input value = 0

212+
<6>[    0.256828] NET: Registered protocol family 31

213-
<3>[   40.614039] mdnie [mdnie set] mDNIe_Set_Mode

213+
<6>[    0.256828] Bluetooth: HCI device and connection manager initialized

214-
<3>[   40.617701] mdnie cmap->len 256

214+
<6>[    0.256859] Bluetooth: HCI socket layer initialized

215-
<3>[   40.620601] mdnie [mDNIe] mDNIe_Set_Mode : Current_mDNIe_mode (0)

215+
<6>[    0.256859] Bluetooth: L2CAP socket layer initialized

216-
<3>[   40.626888] mdnie [mDNIe] Sharpness value : (0)

216+
<6>[    0.257195] Bluetooth: SCO socket layer initialized

217-
<3>[   40.634182] mdnie [mdnie set]negative_store, input value = 0

217+
<6>[    0.257591] cfg80211: Calling CRDA to update world regulatory domain

218-
<6>[   40.639279] [negative] value = 0

218+
<6>[    0.259392] Switching to clocksource gp_timer

219-
<3>[   40.639279] mdnie [mdnie set] mDNIe_Set_mDNIe_Mode = 0

219+
<6>[    0.298916] NET: Registered protocol family 2

220-
<3>[   40.644987] mdnie [mdnie set] mDNIe_Set_Mode

220+
<6>[    0.299221] IP route cache hash table entries: 32768 (order: 5, 131072 byt

221-
<3>[   40.648374] mdnie cmap->len 256

221+
es)

222-
<3>[   40.651518] mdnie [mDNIe] mDNIe_Set_Mode : Current_mDNIe_mode (0)

222+
<6>[    0.299984] TCP established hash table entries: 131072 (order: 8, 1048576

223-
<3>[   40.664520] mdnie [mDNIe] Sharpness value : (0)

223+
bytes)

224-
<6>[   41.580924] alarm_set_rtc: Failed to set RTC, time will be lost on reboot

224+
<6>[    0.302914] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

225-
<3>[   42.574057] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0

225+
<6>[    0.304440] TCP: Hash tables configured (established 131072 bind 65536)

226-
<6>[   42.590508] set_esd_disable is called

226+
<6>[    0.304440] TCP: reno registered

227-
<6>[   42.667297] Sensors unset: 32767

227+
<6>[    0.304471] UDP hash table entries: 512 (order: 2, 16384 bytes)

228-
<6>[   42.672394] Sensors set: 0

228+
<6>[    0.304532] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

229-
<6>[   42.672577] Sensors unset: 32767

229+
<6>[    0.304959] NET: Registered protocol family 1

230-
<6>[   42.732336] request_suspend_state: sleep (0->3) at 42730095673 (2013-03-31

230+
<6>[    0.305478] RPC: Registered named UNIX socket transport module.

231-
 21:30:22.237928206 UTC)

231+
<6>[    0.305508] RPC: Registered udp transport module.

232-
<6>[   42.732824] cypress_power_off is finished.

232+
<6>[    0.305508] RPC: Registered tcp transport module.

233-
<6>[   42.732824] Early Suspend:ESD IRQ is disabled

233+
<6>[    0.305539] RPC: Registered tcp NFSv4.1 backchannel transport module.

234-
<5>[   42.732855] mms_ts 3-0048: mms_ts_suspend: users=1

234+
<6>[    0.305875] Trying to unpack rootfs image as initramfs...

235-
<1>[   42.732855] cpufreq_gov_suspend_gov_DENIED2:

235+
<6>[    0.335022] Freeing initrd memory: 352K

236-
<1>[   42.736303] cpufreq_gov_suspend_gov_SCHED_DENIED2:

236+
<6>[    0.337433] Detected 5 counters on the L2CC PMU.

237-
<7>[   42.741919] [TSP] release_all_fingers

237+
<3>[    0.337799] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

238-
<6>[   42.742560] tsp 1.8V off is finished.

238+
lient: name: scm_pas

239-
<6>[   42.743079] tsp 3.3V off is finished.

239+
<6>[    0.339111] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot

240-
<4>[   42.802380] dhd_early_suspend: enter

240+
<6>[    0.340973] pil_qdsp6v4 pil_qdsp6v4.2: using secure boot

241-
<4>[   42.802411] dhd_set_suspend: force extra Suspend setting

241+
<6>[    0.342682] pil_qdsp6v4 pil_qdsp6v4.1: using secure boot

242-
<4>[   42.805920] Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode

242+
<6>[    0.344941] pil_riva pil_riva: using secure boot

243
<3>[    0.349610] smd_channel_probe_worker: allocation table not initialized

244-
<6>[   42.806958] mipi_samsung_disp_early_suspend

244+
<6>[    0.362673] NET: Registered protocol family 27

245-
<6>[   42.806989] set_esd_disable is called

245+
<6>[    0.363894] dspcrashd_probe: Platform driver values: Base = 0x8da00000, Si

246-
<3>[   42.842331] dtv_pipe is not configured yet

246+
ze = 0x1800000,pdata = 0xdeaddead

247-
<7>[   42.854204] footswitch_disable: fs_mdp

247+
<6>[    0.368075] modem_8960_init: modem fatal driver init'ed.

248-
<6>[   42.858477] [@@@@@mpu_dev_early_suspend@@@@@]

248+
<6>[    0.368441] lpass_fatal_init: lpass SSR driver init'ed.

249-
<6>[   42.858477] [mpu_early_notifier_callback] event = 3

249+
<6>[    0.368594] acpuclk-8960 acpuclk-8960: SPEED BIN: 0

250-
<6>[   42.858629] Sensors unset: 32767

250+
<6>[    0.368625] acpuclk-8960 acpuclk-8960: ACPU PVS: 3

251-
<6>[   42.858812] sec_bat_early_suspend[BATT]...

251+
<3>[    0.369937] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

252-
<6>[   42.858843] active wake lock radio-interface

252+
lient: name: acpuclk-8960

253-
<6>[   42.858873] PM: Syncing filesystems...

253+
<6>[    0.370273] acpuclk-8960 acpuclk-8960: CPU0: 30 frequencies supported

254-
<6>[   42.858873] active wake lock PowerManagerService.Broadcasts

254+
<6>[    0.370395] acpuclk-8960 acpuclk-8960: CPU1: 30 frequencies supported

255-
<6>[   42.858873] active wake lock PowerManagerService

255+
<5>[    0.372501] msm_rpm_log_probe: OK

256-
<6>[   42.858873] active wake lock msm_otg

256+
<4>[    0.375888] highmem bounce pool size: 64 pages

257-
<6>[   42.858904] active wake lock wlan_rx_wake, time left 95

257+
<5>[    0.387944] NFS: Registering the id_resolver key type

258-
<6>[   42.858904] active wake lock wlan_ctrl_wake, time left 97

258+
<6>[    0.390752] fuse init (API version 7.18)

259-
<6>[   42.947413] sync done.

259+
<6>[    0.391393] msgmni has been set to 1222

260-
<3>[   52.884785] init: untracked pid 3244 exited

260+
<6>[    0.396429] io scheduler noop registered

261-
<3>[   52.954433] init: untracked pid 3236 exited

261+
<6>[    0.396490] io scheduler deadline registered (default)

262-
<6>[   61.363436] max17040_work : VCELL:3730mV, AVGVCELL:3686mV

262+
<6>[    0.396551] io scheduler row registered

263-
<6>[   61.363436] max17040_work : Raw SOC:1290%, SOC:11%

263+
<6>[    0.396947] io scheduler cfq registered

264-
<6>[   61.364382] max17040_work : CONFIG:0x1c85, RATE:0x6503

264+
<6>[    0.397009] io scheduler fiops registered

265-
<6>[   61.364871] max17040_work : STATUS:0xff01, temperature:27

265+
<6>[    0.397039] io scheduler sio registered

266-
<6>[   61.371463] max17040 13-0036: 80bah,cd19h,0000h,1100h,0000h,1c85h,ffffh,ff

266+
<6>[    0.397070] io scheduler vr registered

267-
ffh,ffffh,ff00h,6503h,077dh,ff01h,ffffh,

267+
<6>[    0.397100] io scheduler zen registered

268-
<6>[   74.298122] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

268+
<6>[    0.397131] io scheduler fifo registered

269-
<6>[   74.802472] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

269+
<7>[    0.400549] footswitch_enable: fs_mdp

270-
<6>[   74.802533] sec_bat_monitor_work: battery check is present (1 time )

270+
<3>[    0.404761] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

271-
<6>[   74.803967] [battery] level(11), vcell(3720000), therm(278)

271+
lient: name: dtv

272-
<6>[   74.803998] [battery] cable_type(1), chg_status(1), health(1)

272+
<6>[    0.405829] mipi_dsi base phy_addr = 0x4700000 virt = 0xf0400000

273-
<6>[   74.803998] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

273+
<6>[    0.406073] mmss_sfpb  base phy_addr = 0x5700000,virt = 0xf0076000

274-
<6>[   91.443399] max17040_work : VCELL:3727mV, AVGVCELL:3695mV

274+
<7>[    0.406775] Is_There_cmc624 : CMC624 is not there!!!!

275-
<6>[   91.443430] max17040_work : Raw SOC:1290%, SOC:11%

275+
<6>[    0.407904] set_esd_disable is called

276-
<6>[   91.444376] max17040_work : CONFIG:0x1c85, RATE:0x6503

276+
<6>[    0.408423] setting pdata->panel_info.fb_num to 3. type: 8

277-
<6>[   91.444834] max17040_work : STATUS:0xff01, temperature:27

277+
<3>[    0.409278] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

278-
<6>[   91.451457] max17040 13-0036: 60bah,cd19h,0000h,1100h,0000h,1c85h,ffffh,ff

278+
lient: name: mdp

279-
ffh,ffffh,ff00h,6503h,077dh,ff01h,ffffh,

279+
<6>[    0.422768] FrameBuffer[0] 720x1280 size=11304960 bytes is registered succ

280-
<6>[  112.568441] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

280+
essfully!

281-
<6>[  113.072485] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

281+
<7>[    0.425820] Registered led device: lcd-backlight

282-
<6>[  113.072516] sec_bat_monitor_work: battery check is present (1 time )

282+
<6>[    0.428322] setting pdata->panel_info.fb_num to 1. type: 7

283-
<6>[  113.073981] [battery] level(11), vcell(3698750), therm(277)

283+
<6>[    0.430367] FrameBuffer[1] 1920x1080 size=0 bytes is registered successful

284-
<6>[  113.073981] [battery] cable_type(1), chg_status(1), health(1)

284+
ly!

285-
<6>[  113.074011] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

285+
<6>[    0.436563] mdp4_dtv_vsync_init: ndx=0

286-
<6>[  121.523454] max17040_work : VCELL:3710mV, AVGVCELL:3707mV

286+
<3>[    0.436899] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group

287-
<6>[  121.523485] max17040_work : Raw SOC:1290%, SOC:11%

287+
 e8b2b008

288-
<6>[  121.524431] max17040_work : CONFIG:0x1c85, RATE:0x8c02

288+
<6>[    0.437173] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Featur

289-
<6>[  121.524889] max17040_work : STATUS:0xff01, temperature:27

289+
e: Enabled

290-
<6>[  121.533374] max17040 13-0036: 80b9h,cd19h,0000h,1100h,0000h,1c85h,ffffh,ff

290+
<6>[    0.438608] setting pdata->panel_info.fb_num to 1. type: 10

291-
ffh,ffffh,ff00h,8c02h,077dh,ff01h,ffffh,

291+
<3>[    0.438974] Inside writeback_driver_init

292-
<3>[  128.274011] NOHZ: local_softirq_pending 08

292+
<3>[    0.439890] Inside writeback_probe

293-
<3>[  129.273920] NOHZ: local_softirq_pending 08

293+
<6>[    0.441477] FrameBuffer[2] 1280x720 size=0 bytes is registered successfull

294-
<3>[  129.280451] NOHZ: local_softirq_pending 08

294+
y!

295-
<3>[  130.274561] NOHZ: local_softirq_pending 08

295+
<6>[    0.450144]

296-
<3>[  131.274866] NOHZ: local_softirq_pending 08

296+
<6>[    0.450144]  msm_vidc_enc: Inside vid_enc_init()

297-
<3>[  131.602014] NOHZ: local_softirq_pending 08

297+
<6>[    0.450633]

298-
<3>[  131.614466] NOHZ: local_softirq_pending 08
298+
<6>[    0.450663]  msm_vidc_enc: Inside vid_enc_vcd_init()

299
<6>[    0.451732] create mhl sysfile

300
<6>[    0.452952] input: sii9234_rcp as /devices/virtual/input/input1

301
<6>[    0.548115] msm_serial: driver initialized

302
<6>[    0.549153] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MS

303
M HS UART

304
<6>[    0.550007] msm_serial_hs module loaded

305
<6>[    0.550251] msm_serial_hsl: detected port #0

306
<6>[    0.550495] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16440000 (irq = 186) is a

307
MSM

308
<6>[    0.550618] msm_serial_hsl: console setup on port #0

309
<6>[    0.734839] console [ttyHSL0] enabled

310
<6>[    0.735571] msm_serial_hsl: driver initialized

311
<3>[    0.736822] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

312
lient: name: rotator

313
<7>[    0.745246] footswitch_enable: fs_rot

314
<7>[    0.745521] footswitch_disable: fs_rot

315
<6>[    0.746131] msm_rotator_probe: rotator_hw_revision=2

316
<6>[    0.752113] diagchar initialized now

317
<3>[    0.760567] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

318
lient: name: grp3d

319
<6>[    0.768716] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is G

320
PUMMU

321
<3>[    0.771432] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

322
lient: name: grp2d0

323
<6>[    0.779856] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is G

324
PUMMU

325
<3>[    0.781687] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

326
lient: name: grp2d1

327
<6>[    0.790080] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is G

328
PUMMU

329
<6>[    0.809217] brd: module loaded

330
<6>[    0.818403] loop: module loaded

331
<3>[    0.820296] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

332
lient: name: qsee

333
<6>[    0.828506] Loading pn544 driver

334
<6>[    0.828933] pn544_probe : IRQ num 394

335
<6>[    0.829177] pn544_probe : requesting IRQ 394

336
<6>[    0.830306] input: fsa9485 as /devices/platform/i2c-gpio.11/i2c-11/11-0025

337
/input/input2

338
<6>[    0.830367] fsa9485_reg_init is called

339
<6>[    0.835922] fsa9485 11-0025:  fsa9485_reg_init dev ID: 0x0

340
<4>[    0.836441] i2c-core: driver [fsa9485] using legacy resume method

341
<6>[    0.837265] i2c i2c-12: mpu_probe: 0

342
<6>[    0.837326] <6>mldl_cfg:Reset MPU6050 B1

343
<6>[    0.945460] i2c i2c-12: Installing irq using 357

344
<6>[    0.945490] i2c i2c-12: Module Param interface = mpuirq

345
<6>[    0.946162] i2c i2c-12: inv_mpu_register_slave: +mpu6050 Type 1: Addr: 68

346
IRQ: 357, Adapt: 12

347
<6>[    0.946558] i2c i2c-12: Installing accelirq irq using 357

348
<4>[    0.947169] i2c-core: driver [mpu6050] using legacy suspend method

349
<4>[    0.947199] i2c-core: driver [mpu6050] using legacy resume method

350
<6>[    0.947260] mpu_init: Probe name mpu6050

351
<6>[    0.947443] i2c i2c-12: ak8975_mod_probe: ak8975_mod

352
<6>[    0.947474] i2c i2c-12: inv_mpu_register_slave: +ak8975 Type 2: Addr:  c I

353
RQ: 356, Adapt: 12

354
<6>[    0.949214] i2c i2c-12: Installing compassirq irq using 356

355
<6>[    0.949549] ak8975_mod_init: Probe name ak8975_mod

356
<6>[    0.949824] sec_jack:sec_jack_probe : Registering jack driver

357
<6>[    0.950129] input: sec_jack as /devices/virtual/input/input3

358
<4>[    0.951808] 8921_l16: Failed to create debugfs directory

359
<3>[    1.010651] cm36651_setup_reg: initial proximity value = 0

360
<6>[    1.016969] cm36651_setup_reg is success.

361
<6>[    1.017396] input: proximity_sensor as /devices/virtual/input/input4

362
<6>[    1.018586] input: light_sensor as /devices/virtual/input/input5

363
<6>[    1.019288] cm36651_i2c_probe is success.

364
<6>[    1.020082] thread_start

365
<6>[    1.020143] a2220_probe - finish

366
<4>[    1.020296] i2c-core: driver [audience_a2220] using legacy suspend method

367
<4>[    1.020326] i2c-core: driver [audience_a2220] using legacy resume method

368
<6>[    1.020662] wcd9xxx_i2c_probe

369
<6>[    1.091988] wcd9xxx_check_codec_type: codec is tabla_codec

370
<6>[    1.092018] wcd9xxx_check_codec_type: Read codec idbytes & version

371
<6>[    1.092049] byte_0[00000002] byte_1[00000000] byte_2[00000000]

372
<6>[    1.092079]  byte_3[00000001] version = 2

373
<6>[    1.093056] wcd9xxx_i2c_probe

374
<6>[    1.093087] probe for other slaves devices of tabla

375
<6>[    1.093148] wcd9xxx_i2c_probe

376
<6>[    1.093178] probe for other slaves devices of tabla

377
<6>[    1.093239] wcd9xxx_i2c_probe

378
<6>[    1.093270] probe for other slaves devices of tabla

379
<4>[    1.093453] i2c-core: driver [tabla-i2c-core] using legacy suspend method

380
<4>[    1.093483] i2c-core: driver [tabla-i2c-core] using legacy resume method

381
<6>[    1.095956] SCSI Media Changer driver v0.25

382
<6>[    1.097176] spi_qsd spi_qsd.0: master is unqueued, this is deprecated

383
<6>[    1.099862] tun: Universal TUN/TAP device driver, 1.6

384
<6>[    1.099893] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>

385
<6>[    1.100259] rmnet_init: BAM devices[8]

386
<6>[    1.127971] PPP generic driver version 2.4.2

387
<6>[    1.128277] PPP BSD Compression module registered

388
<6>[    1.128307] PPP Deflate Compression module registered

389
<6>[    1.130230] PPP MPPE Compression module registered

390
<6>[    1.130260] NET: Registered protocol family 24

391
<6>[    1.130291] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256

392
) (6 bit encapsulation enabled).

393
<6>[    1.130352] CSLIP: code copyright 1989 Regents of the University of Califo

394
rnia.

395
<6>[    1.130566] usbcore: registered new interface driver asix

396
<6>[    1.130779] usbcore: registered new interface driver cdc_ether

397
<6>[    1.130932] usbcore: registered new interface driver net1080

398
<6>[    1.131115] usbcore: registered new interface driver cdc_subset

399
<6>[    1.131268] usbcore: registered new interface driver zaurus

400
<6>[    1.131725] usbcore: registered new interface driver cdc_ncm

401
<6>[    1.132061] msm_otg msm_otg: msm_otg probe

402
<6>[    1.132244] msm_otg msm_otg: OTG regs = f0090000

403
<6>[    1.135388] pm8921_charger_register_vbus_sn: c041ba48

404
<3>[    1.135418] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

405
lient: name: usb

406
<6>[    1.143018] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

407
<6>[    1.143964] usbcore: registered new interface driver cdc_acm

408
<6>[    1.143995] cdc_acm: USB Abstract Control Model driver for USB modems and

409
ISDN adapters

410
<6>[    1.144086] usbcore: registered new interface driver usblp

411
<6>[    1.144117] Initializing USB Mass Storage driver...

412
<6>[    1.144208] usbcore: registered new interface driver usb-storage

413
<6>[    1.144239] USB Mass Storage support registered.

414
<6>[    1.144330] usbcore: registered new interface driver ums-alauda

415
<6>[    1.144422] usbcore: registered new interface driver ums-cypress

416
<6>[    1.144483] usbcore: registered new interface driver ums-datafab

417
<6>[    1.144575] usbcore: registered new interface driver ums-freecom

418
<6>[    1.144666] usbcore: registered new interface driver ums-isd200

419
<6>[    1.144758] usbcore: registered new interface driver ums-jumpshot

420
<6>[    1.144849] usbcore: registered new interface driver ums-karma

421
<6>[    1.144941] usbcore: registered new interface driver ums-onetouch

422
<6>[    1.145032] usbcore: registered new interface driver ums-sddr09

423
<6>[    1.145124] usbcore: registered new interface driver ums-sddr55

424
<6>[    1.145215] usbcore: registered new interface driver ums-usbat

425
<6>[    1.145399] usbcore: registered new interface driver usbserial

426
<6>[    1.145399] usbserial: USB Serial Driver core

427
<6>[    1.145490] usbcore: registered new interface driver pl2303

428
<6>[    1.145551] USB Serial support registered for pl2303

429
<6>[    1.145673] usbcore: registered new interface driver qcserial

430
<6>[    1.145734] USB Serial support registered for Qualcomm USB modem

431
<6>[    1.145826] usbcore: registered new interface driver usb_ehset_test

432
<6>[    1.145948] usbcore: registered new interface driver diag_bridge

433
<6>[    1.146345] usbcore: registered new interface driver mdm_bridge

434
<6>[    1.147535] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32

435
<6>[    1.147779] mbim_init: initialize 1 instances

436
<6>[    1.147932] mbim_init: Initialized 1 ports

437
<6>[    1.150312] rndis_qc_init: initialize rndis QC instance

438
<6>[    1.150801] android_usb gadget: Mass Storage Function, version: 2009/09/11

439
440
<6>[    1.150801] android_usb gadget: Number of LUNs=1

441
<6>[    1.150831]  lun0: LUN: removable file: (no medium)

442
<6>[    1.151258] android_usb gadget: android_usb ready

443
<6>[    1.152052] mousedev: PS/2 mouse device common for all mice

444
<6>[    1.153883] input: sec_keys as /devices/platform/sec_keys/input/input6

445
<6>[    1.154860] usbcore: registered new interface driver xpad

446
<6>[    1.155226] input: sec_touchscreen as /devices/i2c-3/3-0048/input/input7

447
<6>[    1.155867] mms_ts 3-0048: [TSP]fw version 0xbb !!!!

448
<6>[    1.156355] mms_ts 3-0048: [TSP]hw rev = 0x01

449
<3>[    1.157729] mms_ts 3-0048: [TSP] ISC Ver [0xbb] [0x20] [0x20]

450
<3>[    1.162459] mms_ts 3-0048: [TSP] fw is latest. Do not update.

451
<6>[    1.168625] mms_ts 3-0048: Melfas MMS-series touch controller initialized

452
<6>[    1.170730] input: barometer_sensor as /devices/virtual/input/input8

453
<6>[    1.173447] using rtc device, pm8xxx_rtc, for alarms

454
<6>[    1.173538] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0

455
456
<6>[    1.174271] i2c /dev entries driver

457
<6>[    1.174546] msm_otg msm_otg: phy_reset: success

458
<6>[    1.177750] lirc_dev: IR Remote Control driver registered, major 240

459
<6>[    1.177811] IR NEC protocol handler initialized

460
<6>[    1.177842] IR RC5(x) protocol handler initialized

461
<6>[    1.177872] IR RC6 protocol handler initialized

462
<6>[    1.177872] IR JVC protocol handler initialized

463
<6>[    1.177903] IR Sony protocol handler initialized

464
<6>[    1.177933] IR RC5 (streamzap) protocol handler initialized

465
<6>[    1.177964] IR SANYO protocol handler initialized

466
<6>[    1.177994] IR MCE Keyboard/mouse protocol handler initialized

467
<6>[    1.178025] IR LIRC bridge handler initialized

468
<6>[    1.178788] usbcore: registered new interface driver uvcvideo

469
<6>[    1.178818] USB Video Class driver (1.1.1)

470
<3>[    1.180009] [__s5c73m3_probe:3868] S5C73M3 probe

471
<6>[    1.181352] a2220_bootup_init: starting to load image (2273 passes)...

472
<3>[    1.183824] [s5c73m3_sensor_probe_cb:3843] Entered

473
<3>[    1.188829] [s5c73m3_i2c_probe:3725] Entered

474
<3>[    1.192888] [s5c73m3_init_client:3424] Entered

475
<3>[    1.197405] [s5c73m3_i2c_probe:3745] Exit

476
<3>[    1.201526] [s5c73m3_sensor_probe:3776] Entered

477
<3>[    1.205768] [s5c73m3_spi_init:226] Entered

478
<3>[    1.210132] [s5c73m3_spi_probe:191] Entered

479
<3>[    1.214100] [s5c73m3_spi_probe:201] s5c73m3_spi successfully probed

480
<3>[    1.220570] [s5c73m3_sensor_probe :  3799] Probe_done!!

481
<7>[    1.226369] ############# s5k6a3yx_probe ##############

482
<7>[    1.226430] #######s5k6a3yx_sensor_v4l2_probe #########

483
<6>[    1.232046] max17040_probe: MAX17043 driver Loading!

484
<6>[    1.232076] max17040_get_version :

485
<6>[    1.233175] max17040 13-0036: MAX17040 Fuel-Gauge Ver 00

486
<6>[    1.234274] max17040_get_rcomp : current rcomp = 0x851c(85)

487
<6>[    1.234304] [max17048] using RCOMP (0x851c)

488
<6>[    1.236258] max17040_get_rcomp : current rcomp = 0x851c(85)

489
<4>[    1.241538] i2c-core: driver [max17040] using legacy suspend method

490
<4>[    1.241568] i2c-core: driver [max17040] using legacy resume method

491
<6>[    1.242728] max17040_work : VCELL:3791mV, AVGVCELL:3791mV

492
<6>[    1.242759] max17040_work : Raw SOC:1585%, SOC:14%

493
<6>[    1.243155] smb347_probe: SMB347 driver Loading!

494
<6>[    1.245322] max17040_work : CONFIG:0x1c85, RATE:0x9000

495
<6>[    1.247184] max17040_work : STATUS:0xff01, temperature:20

496
<4>[    1.260888] i2c-core: driver [smb347] using legacy suspend method

497
<4>[    1.260918] i2c-core: driver [smb347] using legacy resume method

498
<6>[    1.267663] max17040 13-0036: 90bdh,b41fh,0000h,1100h,0000h,1c85h,ffffh,ff

499
ffh,ffffh,ff00h,9000h,077dh,ff01h,ffffh,

500
<6>[    1.280085] msm_otg_init_sm: smb347s

501
<3>[    1.280115] couldn't get usb power supply

502
<6>[    1.287196] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received

503
<6>[    1.288051] pm8xxx_tm_probe: OK

504
<6>[    1.289638] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: d

505
[email protected]

506
<6>[    1.290065] Bluetooth: HCI UART driver ver 2.2

507
<6>[    1.290126] Bluetooth: HCI H4 protocol initialized

508
<6>[    1.290157] Bluetooth: BlueSleep Mode Driver Ver 1.1

509
<6>[    1.293667] cpuidle: using governor ladder

510
<6>[    1.293697] cpuidle: using governor menu

511
<6>[    1.294582] mmc0: SDCC Version: 0x00000018

512
<3>[    1.294643] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

513
lient: name: msm_sdcc

514
<6>[    1.304776] mmc0: bam physical base=0x12402000

515
<6>[    1.304898] mmc0: bam virtual base=0xf00a4000

516
<6>[    1.304929] sps:BAM 0x12402000 is registered.

517
<6>[    1.304929] mmc0: BAM device registered. bam_handle=0xe7d69e00

518
<6>[    1.305142] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6

519
<6>[    1.305569] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130

520
<6>[    1.305600] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800

521
<3>[    1.305692] mmc0: No card detect facilities available

522
<6>[    1.311796] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 d

523
ma -1 dmacrcri -1

524
<6>[    1.311826] mmc0: Controller capabilities: 0x0000019e

525
<6>[    1.311826] mmc0: 8 bit data mode enabled

526
<6>[    1.311857] mmc0: 4 bit data mode disabled

527
<6>[    1.311857] mmc0: polling status mode disabled

528
<6>[    1.311887] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz

529
<6>[    1.311887] mmc0: Slot eject status = 0

530
<6>[    1.311918] mmc0: Power save feature enable = 1

531
<6>[    1.311918] mmc0: SPS-BAM data transfer mode available

532
<6>[    1.312131] mmc1: SDCC Version: 0x00000018

533
<3>[    1.312162] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

534
lient: name: msm_sdcc

535
<6>[    1.325377] mmc1: bam physical base=0x12182000

536
<6>[    1.325499] mmc1: bam virtual base=0xf01f4000

537
<6>[    1.325530] sps:BAM 0x12182000 is registered.

538
<6>[    1.325530] mmc1: BAM device registered. bam_handle=0xe7de6600

539
<6>[    1.325743] sps:BAM 0x12182000 enabled: ver:0x5, number of pipes:6

540
<6>[    1.326140] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128

541
<6>[    1.326201] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800

542
<6>[    1.329162] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,657

543
 dma -1 dmacrcri -1

544
<6>[    1.329314] mmc1: Controller capabilities: 0x0000019e

545
<6>[    1.329345] mmc1: 8 bit data mode disabled

546
<6>[    1.329345] mmc1: 4 bit data mode enabled

547
<6>[    1.329345] mmc1: polling status mode disabled

548
<6>[    1.329375] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz

549
<6>[    1.329375] mmc1: Slot eject status = 0

550
<6>[    1.329406] mmc1: Power save feature enable = 1

551
<6>[    1.329406] mmc1: SPS-BAM data transfer mode available

552
<6>[    1.329742] mmc2: SDCC Version: 0x00000018

553
<3>[    1.329803] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_c

554
lient: name: msm_sdcc

555
<6>[    1.339233] mmc2: bam physical base=0x121c2000

556
<6>[    1.339356] mmc2: bam virtual base=0xf01fc000

557
<6>[    1.339386] sps:BAM 0x121c2000 is registered.

558
<6>[    1.339386] mmc2: BAM device registered. bam_handle=0xe7de6e00

559
<6>[    1.339783] sps:BAM 0x121c2000 enabled: ver:0x5, number of pipes:6

560
<6>[    1.340241] mmc2: Qualcomm MSM SDCC-BAM at 0x00000000121c2000 irq 127

561
<6>[    1.340271] mmc2: Qualcomm MSM SDCC-DML at 0x00000000121c0800

562
<6>[    1.340363] brcm_wifi_status_register: callback is c0541680, devid is e8c8

563
b3c0

564
<6>[    1.341919] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 d

565
ma -1 dmacrcri -1

566
<6>[    1.341950] mmc2: Controller capabilities: 0x0000019e

567
<6>[    1.341950] mmc2: 8 bit data mode disabled

568
<6>[    1.341980] mmc2: 4 bit data mode enabled

569
<6>[    1.341980] mmc2: polling status mode disabled

570
<6>[    1.342011] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz

571
<6>[    1.342011] mmc2: Slot eject status = 0

572
<6>[    1.342041] mmc2: Power save feature enable = 1

573
<6>[    1.342041] mmc2: SPS-BAM data transfer mode available

574
<3>[    1.342774] aat1290a_led_probe : Probe

575
<6>[    1.360689] usbcore: registered new interface driver usbhid

576
<6>[    1.360842] usbhid: USB HID core driver

577
<6>[    1.360842] zram: num_devices not specified. Using default: 1

578
<6>[    1.360872] zram: Creating 1 devices ...

579
<6>[    1.362002] zcache: using lzo compressor

580
<6>[    1.362398] zcache: cleancache enabled using kernel transcendent memory an

581
d compression buddies

582
<6>[    1.363314] ashmem: initialized

583
<6>[    1.363436] logger: created 256K log 'log_main'

584
<6>[    1.368747] logger: created 256K log 'log_events'

585
<6>[    1.368899] logger: created 256K log 'log_radio'

586
<6>[    1.374149] logger: created 256K log 'log_system'

587
<6>[    1.395971] usbcore: registered new interface driver snd-usb-audio

588
<6>[    1.413581] tabla_probe

589
<6>[    1.416023] msm_pcm_probe: dev name msm-voip-dsp

590
<6>[    1.417762] msm_pcm_probe: dev name msm-pcm-dsp

591
<6>[    1.418159] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp

592
<6>[    1.418525] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp

593
<6>[    1.419929] msm_compr_probe: dev name msm-compr-dsp

594
<6>[    1.420814] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa

595
<6>[    1.421303] msm8960_audio_init: start

596
<6>[    1.443796] mmc0: new high speed DDR MMC card at address 0001

597
<1>[    1.444742] ELEVATOR_INIT:  deadline-0

598
<6>[    1.447886] tabla_codec_probe

599
<6>[    1.448161] mmcblk0: mmc0:0001 MAG4FB 14.6 GiB

600
<4>[    1.456310] Alternate GPT is invalid, using primary GPT.

601
<6>[    1.456706]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p

602
16 p17 p18 p19 p20 p21 p22 p23

603
<6>[    1.574332] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok

604
<6>[    1.575675] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok

605
<6>[    1.577079] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok

606
<6>[    1.578422] asoc: snd-soc-dummy-dai <-> VoIP mapping ok

607
<6>[    1.579764] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok

608
<6>[    1.581352] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok

609
<6>[    1.582755] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok

610
<6>[    1.584037] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok

611
<6>[    1.585258] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok

612
<6>[    1.586723] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok

613
<6>[    1.588036] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok

614
<6>[    1.589409] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok

615
<6>[    1.590782] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok

616
<6>[    1.592369] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok

617
<6>[    1.593590] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok

618
<6>[    1.594781] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok

619
<6>[    1.596001] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok

620
<6>[    1.597161] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok

621
<6>[    1.598351] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok

622
<6>[    1.599572] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok

623
<6>[    1.600824] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok

624
<6>[    1.601983] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok

625
<6>[    1.603143] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok

626
<6>[    1.604578] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok

627
<6>[    1.605737] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok

628
<6>[    1.606897] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok

629
<6>[    1.609278] asoc: tabla_i2s_rx1 <-> msm-dai-q6.0 mapping ok

630
<4>[    1.609461] tabla_codec tabla_codec: ASoC: Failed to create Digital Mic1 d

631
ebugfs file

632
<6>[    1.615687] asoc: tabla_i2s_tx1 <-> msm-dai-q6.1 mapping ok

633
<6>[    1.619166] input: msm8960-snd-card Volumedown Jack as /devices/platform/s

634
oc-audio.0/sound/card0/input9

635
<6>[    1.619624] input: msm8960-snd-card Volumeup Jack as /devices/platform/soc

636
-audio.0/sound/card0/input10

637
<6>[    1.619960] input: msm8960-snd-card Button Jack as /devices/platform/soc-a

638
udio.0/sound/card0/input11

639
<6>[    1.620448] input: msm8960-snd-card Headset Jack as /devices/platform/soc-

640
audio.0/sound/card0/input12

641
<6>[    1.625515] GACT probability NOT on

642
<6>[    1.625545] Mirror/redirect action on

643
<6>[    1.625576] u32 classifier

644
<6>[    1.625576]     Actions configured

645
<6>[    1.625606] Netfilter messages via NETLINK v0.30.

646
<6>[    1.625698] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

647
<6>[    1.626705] ctnetlink v0.93: registering with nfnetlink.

648
<6>[    1.626857] NF_TPROXY: Transparent proxy support initialized, version 4.1.

649
0

650
<6>[    1.626888] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

651
<6>[    1.627529] xt_time: kernel timezone is -0000

652
<6>[    1.628353] ip_tables: (C) 2000-2006 Netfilter Core Team

653
<6>[    1.628780] arp_tables: (C) 2002 David S. Miller

654
<6>[    1.628933] TCP: cubic registered

655
<6>[    1.628963] Initializing XFRM netlink socket

656
<6>[    1.629696] NET: Registered protocol family 10

657
<6>[    1.634610] Mobile IPv6

658
<6>[    1.634671] ip6_tables: (C) 2000-2006 Netfilter Core Team

659
<6>[    1.635037] IPv6 over IPv4 tunneling driver

660
<6>[    1.635952] NET: Registered protocol family 17

661
<6>[    1.636044] NET: Registered protocol family 15

662
<6>[    1.636471] Bluetooth: RFCOMM TTY layer initialized

663
<6>[    1.636532] Bluetooth: RFCOMM socket layer initialized

664
<6>[    1.636563] Bluetooth: RFCOMM ver 1.11

665
<6>[    1.636593] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

666
<6>[    1.636624] Bluetooth: BNEP filters: protocol multicast

667
<6>[    1.636654] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

668
<5>[    1.637021] Registering the dns_resolver key type

669
<6>[    1.640439] VFP support v0.3: implementor 51 architecture 64 part 4d varia

670
nt 1 rev 0

671
<6>[    1.640561] auto_hotplug: v0.220 by _thalamus modded by ktoonsez for KT747

672
673
<6>[    1.640592] auto_hotplug: 2 CPUs detected

674
<5>[    1.640653] Registering SWP/SWPB emulation handler

675
<6>[    1.640683] clock_late_init: Removing enables held for handed-off clocks

676
<6>[    1.651304] MSM Watchdog Initialized

677
<7>[    1.652708] footswitch_disable: fs_gfx3d

678
<7>[    1.653441] footswitch_disable: fs_ijpeg

679
<7>[    1.654021] footswitch_disable: fs_ved

680
<7>[    1.655058] footswitch_disable: fs_vfe

681
<7>[    1.655730] footswitch_disable: fs_vpe

682
<4>[    1.657164] no pmic restart interrupt specified

683
<4>[    1.657927] 8921_l29: Failed to create debugfs directory

684
<4>[    1.658049] 8921_l10: Failed to create debugfs directory

685
<6>[    1.658965] cypress_power_on is finished.

686
<6>[    1.659148] input: sec_touchkey as /devices/platform/i2c-gpio.16/i2c-16/16

687
-0020/input/input13

688
<7>[    1.659545] Registered led device: button-backlight

689
<4>[    1.660399] mmc1: host does not support reading read-only switch. assuming

690
 write-enable.

691
<6>[    1.666015] mmc1: new ultra high speed DDR50 SDHC card at address e624

692
<1>[    1.666290] ELEVATOR_INIT:  deadline-1

693
<6>[    1.669250] mmcblk1: mmc1:e624 SU16G 14.8 GiB

694
<6>[    1.679414]  mmcblk1: p1

695
<3>[    1.681672] cypress_touchkey 16-0020: Touchkey FW Version: 0x06

696
<7>[    1.766030] [Touchkey] autocal Enabled

697
<6>[    1.771371] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2013-03-31 21:4

698
5:38 UTC (1364766338)

699
<6>[    1.776682] pm8921_charger_probe: driver Loading SKIP!!!

700
<4>[    1.776712] pm8921-charger: probe of pm8921-charger failed with error -22

701
<6>[    1.782084] sec_bat_probe: SEC Battery Driver Loading

702
<6>[    1.782084] [battery] enable Vref_batt_therm

703
<6>[    1.782115] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

704
<6>[    1.783671] sec_bat_probe: initial charging_status = 1

705
<6>[    1.786326] cable type (0) -----

706
<6>[    1.786815] tspdrv: tspdrv_probe.

707
<7>[    1.786906] ImmVibeSPI_ForceOut_Initialize.

708
<6>[    1.787181] ALSA device list:

709
<6>[    1.787181]   #0: msm8960-snd-card

710
<6>[    1.787883] max17040_rcomp_update : temp(28), rcomp 0x851c -> 0x6d1c (109)

711
712
<6>[    1.789134] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

713
<6>[    1.790019] Freeing init memory: 1040K

714
<3>[    1.793865] init: /init.qcom.rc: 498: invalid command '/system/bin/log'

715
<3>[    1.799603] init: /init.qcom.rc: 556: ignored duplicate definition of serv

716
ice 'ril-daemon'

717
<4>[    1.810041] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oo

718
m_score_adj instead.

719
<3>[    1.811994] init: invalid uid 'fm_radio'

720
<3>[    2.103738] init: could not open /dev/keychord

721
<6>[    2.120494] zcache: created ephemeral tmem pool, id=0, client=65535

722
<6>[    2.120738] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mod

723
e. Opts: barrier=1

724
<6>[    2.132824] zcache: created ephemeral tmem pool, id=1, client=65535

725
<6>[    2.132885] EXT4-fs (mmcblk0p11): recovery complete

726
<6>[    2.133953] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mod

727
e. Opts: nomblk_io_submit,errors=remount-ro

728
<6>[    2.134075] zcache: destroyed pool id=1, cli_id=65535

729
<6>[    2.140485] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_

730
sdcc.1/by-name/efs

731
<6>[    2.191057] zcache: created ephemeral tmem pool, id=1, client=65535

732
<6>[    2.191118] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mod

733
e. Opts: barrier=1

734
<6>[    2.290492] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

735
<6>[    2.290523] sec_bat_monitor_work: battery check is present (1 time )

736
<6>[    2.292049] [battery] level(14), vcell(3767500), therm(287)

737
<6>[    2.292049] [battery] cable_type(7), chg_status(1), health(1)

738
<6>[    2.292079] [battery] timeout_chgstp(0), chg_enabled(0), rechg_status(0)

739
<6>[    2.738745] zcache: created ephemeral tmem pool, id=2, client=65535

740
<6>[    2.738867] EXT4-fs (mmcblk0p15): recovery complete

741
<6>[    2.740057] EXT4-fs (mmcblk0p15): mounted filesystem with writeback data m

742
ode. Opts: nomblk_io_submit,errors=remount-ro

743
<6>[    2.740210] zcache: destroyed pool id=2, cli_id=65535

744
<6>[    2.755257] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_

745
sdcc.1/by-name/userdata

746
<6>[    2.774240] zcache: created ephemeral tmem pool, id=2, client=65535

747
<6>[    2.774362] EXT4-fs (mmcblk0p15): mounted filesystem with writeback data m

748
ode. Opts: barrier=1,discard,noauto_da_alloc,journal_async_commit

749
<6>[    2.795940] zcache: created ephemeral tmem pool, id=3, client=65535

750
<6>[    2.796032] EXT4-fs (mmcblk0p17): recovery complete

751
<6>[    2.797070] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mod

752
e. Opts: barrier=1

753
<6>[    2.807202] zcache: created ephemeral tmem pool, id=4, client=65535

754
<6>[    2.807263] EXT4-fs (mmcblk0p16): recovery complete

755
<6>[    2.808271] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mod

756
e. Opts: barrier=1

757
<6>[    2.950770] sec_jack:sec_jack_det_irq_handler : ready = 1.

758
<6>[    2.950801] sec_jack: ear micbias off

759
<6>[    3.238974] zcache: created ephemeral tmem pool, id=5, client=65535

760
<6>[    3.239005] EXT4-fs (mmcblk0p14): re-mounted. Opts: barrier=1

761
<6>[    3.421791] a2220_bootup_init:a2220_bootup_init 7

762
<6>[    3.450907] a2220_bootup_init:firmware loaded successfully

763
<6>[    3.540912] fsa9485 11-0025: fsa9485_init_detect

764
<6>[    3.541889] fsa9485 11-0025: dev1: 0x4, dev2: 0x0 adc : 0x1f

765
<6>[    3.541919] fsa9485 11-0025: usb connect

766
<6>[    3.541919] fsa9485_usb_cb attached 1

767
<6>[    3.541919] fsa9485_usb_cb set vbus state

768
<6>[    3.541919] msm_otg_set_vbus_state: 1

769
<6>[    3.541950] msm_otg msm_otg: msm_otg_set_vbus_state(1): on working

770
<6>[    3.541950] sec-battery sec-battery: sec_bat_set_property: cable was chang

771
ed(4), prev(0)

772
<6>[    3.543262] smb347_set_charging_current : 500

773
<6>[    3.546619] [battery] INPUT_USBIN

774
<6>[    3.546619] smb347_charger_function_conrol : reg (0x1) = 0x21

775
<6>[    3.556538] smb347_set_top_off : => reg (0x0) = 0x7a

776
<6>[    3.558309] max17040_rcomp_update : temp(28), rcomp 0x6d1c -> 0x851c (133)

777
778
<6>[    3.559621] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

779
<6>[    3.630276] EXT4-fs (mmcblk0p14): re-mounted. Opts: barrier=1

780
<3>[    3.643857] init: cannot find '/system/bin/handle_compcache', disabling 'c

781
ompcache'

782
<1>[    3.652464] store_scaling_booted call open: 1512000

783
<6>[    3.661315] execute_cmdmsg : execute_cmdmsg :: 80 0 0 0

784
<6>[    3.661498] execute_cmdmsg + 1

785
<6>[    3.661498] execute_cmdmsg + 2

786
<6>[    3.661681] execute_cmdmsg + 3

787
<6>[    3.661681] execute_cmdmsg + 4

788
<6>[    3.661712] got ACK

789
<6>[    3.661712] execute_cmdmsg - finish

790
<6>[    3.661712] a2220_bootup_init:a2220_bootup_init 8

791
<6>[    3.661742] execute_cmdmsg : execute_cmdmsg :: 80 52 0 48

792
<6>[    3.661895] execute_cmdmsg + 1

793
<6>[    3.661895] execute_cmdmsg + 2

794
<6>[    3.662047] execute_cmdmsg + 3

795
<6>[    3.662078] execute_cmdmsg + 4

796
<6>[    3.662078] got ACK

797
<6>[    3.662078] execute_cmdmsg - finish

798
<6>[    3.662078] execute_cmdmsg : execute_cmdmsg :: 80 52 0 5c

799
<6>[    3.662261] execute_cmdmsg + 1

800
<6>[    3.662261] execute_cmdmsg + 2

801
<6>[    3.662414] execute_cmdmsg + 3

802
<6>[    3.662414] execute_cmdmsg + 4

803
<6>[    3.662475] got ACK

804
<6>[    3.662475] execute_cmdmsg - finish

805
<6>[    3.662505] execute_cmdmsg : execute_cmdmsg :: 80 10 0 1

806
<6>[    3.662658] execute_cmdmsg + 1

807
<6>[    3.662658] execute_cmdmsg : ...go to suspend first

808
<6>[    3.662688] a2220_bootup_init : a2220_bootup_init - finish

809
<6>[    3.664336] warning: `qrngd' uses 32-bit capabilities (legacy support in u

810
se)

811
<1>[    3.675080] store_scaling_booted call close: 2106000

812
<3>[    3.682221] init: cannot find '/system/bin/ATFWD-daemon', disabling 'atfwd

813
'

814
<3>[    3.719517] init: cannot find '/system/bin/qseecomd', disabling 'qseecomd'

815
816
<3>[    3.736853] init: cannot find '/system/bin/quipc_igsn', disabling 'quipc_i

817
gsn'

818
<3>[    3.750465] init: cannot find '/system/bin/quipc_main', disabling 'quipc_m

819
ain'

820
<3>[    3.763894] init: cannot find '/system/bin/time_daemon', disabling 'time_d

821
aemon'

822
<3>[    3.788249] init: no such service 'location_mq'

823
<3>[    3.798809] enable_store: android_usb: already disabled

824
<3>[    3.805463] init: no such service 'xtwifi_inet'

825
<3>[    3.819777] init: no such service 'xtwifi_client'

826
<3>[    3.843399] init: using deprecated syntax for specifying property 'sys.usb

827
.config', use ${name} instead

828
<6>[    3.849320] adb_open

829
<6>[    3.849320] mtp_bind_config

830
<6>[    3.849351] adb_bind_config

831
<3>[    3.921867] init: cannot find '/system/bin/sensors.qcom', disabling 'senso

832
rs'

833
<4>[    3.933557] EXT4-fs (mmcblk0p14): Ignoring removed nobh option

834
<6>[    3.933587] EXT4-fs (mmcblk0p14): re-mounted. Opts: data=ordered,barrier=0

835
,nobh

836
<6>[    3.953639] android_work: android_work: did not send uevent (0 0   (null))

837
838
<6>[    3.982633] msm_thermal: enabled = 0

839
<3>[    3.998809] init: no such service 'battery_monitor'

840
<6>[    4.061010] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

841
<6>[    4.061010] sec_bat_monitor_work: battery check is present (1 time )

842
<6>[    4.062505] [battery] level(14), vcell(3770000), therm(286)

843
<6>[    4.062505] [battery] cable_type(1), chg_status(1), health(1)

844
<6>[    4.062536] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

845
<6>[    4.095864] android_work: android_work: sent uevent USB_STATE=CONNECTED

846
<6>[    4.118480] EXT4-fs (mmcblk0p15): re-mounted. Opts: discard,journal_checks

847
um,journal_async_commit,noauto_da_alloc

848
<6>[    4.137250] android_usb gadget: high-speed config #1: android_usb

849
<6>[    4.137280] msm_otg msm_otg: Avail curr from USB = 2

850
<6>[    4.137311] pm8921_charger_vbus_draw: Enter charge=2

851
<6>[    4.137311] pm8921_charger_vbus_draw: not initialized the_chip, usb_chg_cu

852
rrent=2

853
<4>[    4.149244] EXT4-fs (mmcblk0p17): Ignoring removed nobh option

854
<6>[    4.149244] EXT4-fs (mmcblk0p17): re-mounted. Opts: data=ordered,barrier=0

855
,nobh

856
<6>[    4.191088] android_work: android_work: sent uevent USB_STATE=CONFIGURED

857
<7>[    4.396215] footswitch_enable: fs_gfx3d

858
<6>[    4.567678] mipi_samsung_manufacture_id: manufacture_id1=a2

859
<6>[    4.570212] mipi_samsung_manufacture_id: manufacture_id2=60

860
<6>[    4.571402] mipi_samsung_manufacture_id: manufacture_id3=90

861
<6>[    4.571402] mipi_samsung_manufacture_id: manufacture_id=11ba6090

862
<6>[    4.571432] first time mpt read

863
<6>[    4.572226] read_reg : D3[24] : 00 08 0a fc .06 05 00 00 .00 fe 06 fd .05

864
06 01 ff .00 00 02 fc .05 05 00 04 .00 00 00 00 .

865
<6>[    4.572256] second time mpt read

866
<6>[    4.574668] read_reg : D3[24] : 00 08 0a fc .06 05 00 00 .00 fe 06 fd .05

867
06 01 ff .00 00 02 fc .05 05 00 04 .00 00 00 00 .

868
<6>[    4.574698] MTP data is used from first read mtp

869
<6>[    4.574698] mipi_samsung_disp_on MTP is determined : 1

870
<6>[    4.574729] MTP:  00 08 0a fc 06 05 00 00 00 fe 06 fd 05 06 01 ff 00 00 02

871
 fc 05 05 00 04

872
<6>[    4.574729] gamma_cell_determine ldi_revision:96

873
<6>[    4.574851] generate_gray_scale end

874
<6>[    4.575095] Select 4.8 = 0(60)

875
<6>[    4.723271] set_esd_enable is called

876
<3>[    4.870990] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=2

877
<6>[    4.971799] hdmi_msm hdmi_msm.1: hdmi_msm_hpd_feature: 1

878
<6>[    4.994506] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 177

879
780000

880
<6>[    5.189287] pil pil0: q6: Brought out of reset

881
<6>[    5.214466] apr_tal:Q6 Is Up

882
<6>[    5.220998] set_esd_enable_work_func is called

883
<3>[    5.258080] diag: proc 1, msg mask update fail -12, tried 419

884
<6>[    5.584587] pil pil2: modem_fw: Brought out of reset

885
<3>[    5.644651] store_afe_cal: offset 1092280488 is > mem_len 344064

886
<6>[    5.656401] msm8960_i2s_startup

887
<6>[    5.656554] apr_tal: SMD_EVENT_OPEN

888
<6>[    5.659606] msm8660_i2s_hw_params Codec Clock 0xc0c45b90 ; Rx Bit Clock c0

889
c4fe94

890
<6>[    5.659636] tabla_hw_params: dai_name = tabla_i2s_rx1 DAI-ID 1 rate 48000

891
num_ch 2

892
<6>[    6.291286] msm_ta_detect_work: USB exit ta detection - frindex

893
<6>[    6.791027] msmsdcc_runtime_suspend: Enter WIFI suspend

894
<6>[    8.186937] pil pil1: modem: Brought out of reset

895
<3>[    8.313566] accel_open_calibration: Can't open calibration file

896
<6>[    8.320769] Sensors unset: 32767

897
<6>[    8.562246] light_enable_store,new_value=1

898
<6>[    8.769113] EXT4-fs (mmcblk0p14): re-mounted. Opts: nobarrier,data=ordered

899
900
<6>[    8.791210] proximity_enable_store,new_value=1, prox_cal 0

901
<6>[    8.892507] light_enable_store,new_value=0

902
<6>[    8.893087] proximity_enable_store,new_value=0, prox_cal 0

903
<3>[    8.917808] Notify: smsm init

904
<6>[    9.848344] msm8960_i2s_shutdown Codec Clock 0xc0c45b90 ; Rx Bit Clock c0c

905
4fe94

906
<3>[   10.258477] diag: proc 0, msg mask update fail -12, tried 419

907
<6>[   10.715458] apr_tal:Modem Is Up

908
<6>[   11.412391] sps:BAM 0x124c2000 is registered.

909
<6>[   11.412543] sps:BAM 0x124c2000 enabled: ver:0x5, number of pipes:6

910
<6>[   28.816358] request_suspend_state: wakeup (3->0) at 28815421705 (2013-03-3

911
1 21:46:05.527745591 UTC)

912
<6>[   28.862383] TIMERIRQ_START : period=70

913
<6>[   28.862475] Sensors set: 112

914
<6>[   28.865344] <6>MPL-accmpu6050_set_odr:69

915
<6>[   28.865466] <6>MPL-accODR : 14285 (69)mHz

916
<4>[   28.958370] lowmem_shrink: convert oom_adj to oom_score_adj:

917
<4>[   28.958400] oom_adj 0 => oom_score_adj 0

918
<4>[   28.958400] oom_adj 1 => oom_score_adj 58

919
<4>[   28.958400] oom_adj 2 => oom_score_adj 117

920
<4>[   28.958431] oom_adj 4 => oom_score_adj 235

921
<4>[   28.958431] oom_adj 9 => oom_score_adj 529

922
<4>[   28.958431] oom_adj 15 => oom_score_adj 1000

923
<4>[   29.099160] wifi_set_power = 1

924
<6>[   29.099191] ------------------------------------------------

925
<6>[   29.099191] ------------------------------------------------

926
<6>[   29.099191] brcm_wlan_power Enter: power on

927
<4>[   29.099191] wifi_set_carddetect = 1

928
<6>[   29.099252] msmsdcc_runtime_resume: Enter WIFI resume

929
<6>[   29.118602] zcache: created ephemeral tmem pool, id=6, client=65535

930
<6>[   29.118663] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (nul

931
l)

932
<4>[   29.174210] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)

933
<4>[   29.177353] mmc2: queuing unknown CIS tuple 0x80 (6 bytes)

934
<6>[   29.199053] zcache: created ephemeral tmem pool, id=7, client=65535

935
<6>[   29.199053] EXT4-fs (dm-0): re-mounted. Opts: (null)

936
<6>[   29.231374] EXT4-fs (dm-0): re-mounted. Opts: (null)

937
<6>[   29.251609] mmc2: new ultra high speed SDR12 SDIO card at address 0001

938
<4>[   29.252800] alloc static buf at e9300000!

939
<4>[   29.253380] dhdsdio_probe : no mutex held. set lock

940
<4>[   29.253593] F1 signature read @0x18000000=0x16034334

941
<4>[   29.260094] DHD: dongle ram size is set to 524288(orig 524288)

942
<4>[   29.261193] CHIP VER = [0x3]

943
<4>[   29.261193] ----- CHIP bcm4334_B2 -----

944
<4>[   29.262383] wl_create_event_handler thr:6c9 created

945
<6>[   29.262383] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xe7783564

946
947
<4>[   29.266442] p2p0: P2P Interface Registered

948
<4>[   29.266534] dhd_attach thr:6ca created

949
<4>[   29.266595] dhd_attach thr:6cb created

950
<4>[   29.266656] dhd_attach thr:6cc created

951
<6>[   29.311704] zcache: created ephemeral tmem pool, id=8, client=65535

952
<6>[   29.311796] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (nul

953
l)

954
<6>[   29.323821] zcache: created ephemeral tmem pool, id=9, client=65535

955
<6>[   29.324034] EXT4-fs (dm-1): re-mounted. Opts: (null)

956
<6>[   29.354616] EXT4-fs (dm-1): re-mounted. Opts: (null)

957
<4>[   29.372531] dhdsdio_write_vars: Download, Upload and compare of NVRAM succ

958
eeded.

959
<6>[   29.432443] zcache: created ephemeral tmem pool, id=10, client=65535

960
<6>[   29.432504] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (nul

961
l)

962
<6>[   29.452433] zcache: created ephemeral tmem pool, id=11, client=65535

963
<6>[   29.452464] EXT4-fs (dm-2): re-mounted. Opts: (null)

964
<6>[   29.472882] EXT4-fs (dm-2): re-mounted. Opts: (null)

965
<6>[   29.555318] zcache: created ephemeral tmem pool, id=12, client=65535

966
<6>[   29.555379] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (nul

967
l)

968
<6>[   29.576957] zcache: created ephemeral tmem pool, id=13, client=65535

969
<6>[   29.577018] EXT4-fs (dm-3): re-mounted. Opts: (null)

970
<6>[   29.584037] EXT4-fs (dm-3): re-mounted. Opts: (null)

971
<4>[   29.588829] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)

972
<4>[   29.592308] dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23

973
<4>[   29.593193] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79

974
<4>[   29.595818] Firmware up: op_mode=0x0015, Broadcom Dongle Host Driver mac=3

975
8:b4:32

976
<4>[   29.598412] POWER_VAL = 1

977
<4>[   29.607721] Firmware version = wl0: Sep 11 2012 12:06:01 version 6.10.58.7

978
51 (B2 NCHO) FWID 01-0

979
<4>[   29.607721] dhd_net_attach: ifidx 0

980
<4>[   29.613734] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 3

981
8:b4:32

982
<4>[   29.613734] dhdsdio_probe : the lock is released.

983
<4>[   29.614130]

984
<4>[   29.614130] Dongle Host Driver, version 1.28.13.1 (r)

985
<4>[   29.614130] Compiled in drivers/net/wireless/bcmdhd on Mar 31 2013 at 08:5

986
0:24

987
<6>[   29.677521] zcache: created ephemeral tmem pool, id=14, client=65535

988
<6>[   29.677582] EXT4-fs (dm-4): mounted filesystem without journal. Opts: (nul

989
l)

990
<6>[   29.698489] zcache: created ephemeral tmem pool, id=15, client=65535

991
<6>[   29.698550] EXT4-fs (dm-4): re-mounted. Opts: (null)

992
<4>[   29.712192] dhd_open: Enter, net[e7783800]

993
<4>[   29.712192] CHIP VER = [0x3]

994
<4>[   29.712223] ----- CHIP bcm4334_B2 -----

995
<4>[   29.712223]

996
<4>[   29.712223] Dongle Host Driver, version 1.28.13.1 (r)

997
<4>[   29.712223] Compiled in drivers/net/wireless/bcmdhd on Mar 31 2013 at 08:5

998
0:24

999
<6>[   29.724858] EXT4-fs (dm-4): re-mounted. Opts: (null)

1000
<6>[   29.732244] CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=3

1001
a:b4:32

1002
<6>[   29.816938] zcache: pool creation failed: max exceeded

1003
<6>[   29.817091] EXT4-fs (dm-5): mounted filesystem without journal. Opts: (nul

1004
l)

1005
<6>[   29.854448] zcache: pool creation failed: max exceeded

1006
<6>[   29.854509] EXT4-fs (dm-5): re-mounted. Opts: (null)

1007
<6>[   29.859117] EXT4-fs (dm-5): re-mounted. Opts: (null)

1008
<6>[   29.939172] zcache: pool creation failed: max exceeded

1009
<6>[   29.939233] EXT4-fs (dm-6): mounted filesystem without journal. Opts: (nul

1010
l)

1011
<6>[   29.949702] zcache: pool creation failed: max exceeded

1012
<6>[   29.949732] EXT4-fs (dm-6): re-mounted. Opts: (null)

1013
<6>[   29.978605] EXT4-fs (dm-6): re-mounted. Opts: (null)

1014
<6>[   30.064153] zcache: pool creation failed: max exceeded

1015
<6>[   30.064245] EXT4-fs (dm-7): mounted filesystem without journal. Opts: (nul

1016
l)

1017
<6>[   30.109568] zcache: pool creation failed: max exceeded

1018
<6>[   30.109598] EXT4-fs (dm-7): re-mounted. Opts: (null)

1019
<6>[   30.116374] EXT4-fs (dm-7): re-mounted. Opts: (null)

1020
<6>[   30.203387] zcache: pool creation failed: max exceeded

1021
<6>[   30.203479] EXT4-fs (dm-8): mounted filesystem without journal. Opts: (nul

1022
l)

1023
<6>[   30.258843] zcache: pool creation failed: max exceeded

1024
<6>[   30.258873] EXT4-fs (dm-8): re-mounted. Opts: (null)

1025
<6>[   30.265588] EXT4-fs (dm-8): re-mounted. Opts: (null)

1026
<6>[   30.347535] zcache: pool creation failed: max exceeded

1027
<6>[   30.347627] EXT4-fs (dm-9): mounted filesystem without journal. Opts: (nul

1028
l)

1029
<6>[   30.360201] zcache: pool creation failed: max exceeded

1030
<6>[   30.360262] EXT4-fs (dm-9): re-mounted. Opts: (null)

1031
<6>[   30.374393] EXT4-fs (dm-9): re-mounted. Opts: (null)

1032
<4>[   30.416145] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, ret = -17

1033
<6>[   30.458263] zcache: pool creation failed: max exceeded

1034
<6>[   30.458354] EXT4-fs (dm-10): mounted filesystem without journal. Opts: (nu

1035
ll)

1036
<6>[   30.470135] zcache: pool creation failed: max exceeded

1037
<6>[   30.470166] EXT4-fs (dm-10): re-mounted. Opts: (null)

1038
<6>[   30.474652] EXT4-fs (dm-10): re-mounted. Opts: (null)

1039
<4>[   30.522050] wl_bss_connect_done succeeded with 00:92:38

1040
<6>[   30.559987] zcache: pool creation failed: max exceeded

1041
<6>[   30.560079] EXT4-fs (dm-11): mounted filesystem without journal. Opts: (nu

1042
ll)

1043
<4>[   30.580650] wl_bss_connect_done succeeded with 00:92:38

1044
<6>[   30.580680] CFG80211-INFO2) wl_bss_connect_done :  Connected event of conn

1045
ected device e=0 s=0, ignore it

1046
<6>[   30.592705] zcache: pool creation failed: max exceeded

1047
<6>[   30.592766] EXT4-fs (dm-11): re-mounted. Opts: (null)

1048
<6>[   30.603723] EXT4-fs (dm-11): re-mounted. Opts: (null)

1049
<6>[   30.700412] zcache: pool creation failed: max exceeded

1050
<6>[   30.700503] EXT4-fs (dm-12): mounted filesystem without journal. Opts: (nu

1051
ll)

1052
<6>[   31.139539] zcache: pool creation failed: max exceeded

1053
<6>[   31.139539] EXT4-fs (dm-12): re-mounted. Opts: (null)

1054
<6>[   31.145032] EXT4-fs (dm-12): re-mounted. Opts: (null)

1055
<6>[   31.371982] max17040_work : VCELL:3737mV, AVGVCELL:3758mV

1056
<6>[   31.371982] max17040_work : Raw SOC:1585%, SOC:14%

1057
<6>[   31.372958] max17040_work : CONFIG:0x1c85, RATE:0x6c00

1058
<6>[   31.373447] max17040_work : STATUS:0xff01, temperature:28

1059
<6>[   31.380131] max17040 13-0036: e0bah,b41fh,0000h,1100h,0000h,1c85h,ffffh,ff

1060
ffh,ffffh,ff00h,6c00h,077dh,ff01h,ffffh,

1061
<6>[   31.550007] acc_open

1062
<6>[   31.550007] acc_release

1063
<6>[   31.863238] bl_level:128,cd:10:Candela:120 aid_change:1

1064
<6>[   33.571341] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_

1065
btcoex_dhcp: DHCP session starts

1066
<6>[   34.063329] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

1067
<6>[   34.416694] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_

1068
btcoex_dhcp: DHCP is complete

1069
<6>[   34.571005] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

1070
<6>[   34.571036] sec_bat_monitor_work: battery check is present (1 time )

1071
<6>[   34.572501] [battery] level(14), vcell(3705000), therm(285)

1072
<6>[   34.572531] [battery] cable_type(1), chg_status(1), health(1)

1073
<6>[   34.572531] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

1074
<6>[   34.772043] mtp_open

1075
<7>[   39.900991] wlan0: no IPv6 routers present

1076
<3>[   39.959774] init: no such service 'qosmgrd'

1077
<3>[   40.040500] init: no such service 'mpdecision'

1078
<7>[   40.660979] p2p0: no IPv6 routers present

1079
<6>[   43.731420] alarm_set_rtc: Failed to set RTC, time will be lost on reboot

1080
<3>[   45.336731] mdnie [mdnie set] in scenario_store, input value = 0

1081
<3>[   45.347382] mdnie [mdnie set] mDNIe_Set_Mode

1082
<3>[   45.350862] mdnie cmap->len 256

1083
<3>[   45.354066] mdnie [mDNIe] mDNIe_Set_Mode : Current_mDNIe_mode (0)

1084
<3>[   45.359896] mdnie [mDNIe] Sharpness value : (0)

1085
<3>[   45.367465] mdnie [mdnie set]negative_store, input value = 0

1086
<6>[   45.372318] [negative] value = 0

1087
<3>[   45.372318] mdnie [mdnie set] mDNIe_Set_mDNIe_Mode = 0

1088
<3>[   45.377720] mdnie [mdnie set] mDNIe_Set_Mode

1089
<3>[   45.381504] mdnie cmap->len 256

1090
<3>[   45.384831] mdnie [mDNIe] mDNIe_Set_Mode : Current_mDNIe_mode (0)

1091
<3>[   45.393682] mdnie [mDNIe] Sharpness value : (0)

1092
<6>[   51.518113] bl_level:116,cd:9:Candela:110 aid_change:0

1093
<6>[   51.570456] bl_level:106,cd:8:Candela:100 aid_change:1

1094
<6>[   51.617549] bl_level:97,cd:7:Candela:90 aid_change:1

1095
<6>[   51.670379] bl_level:87,cd:6:Candela:80 aid_change:1

1096
<6>[   51.716831] bl_level:77,cd:5:Candela:70 aid_change:1

1097
<6>[   51.769479] bl_level:67,cd:4:Candela:60 aid_change:1

1098
<6>[   51.816084] bl_level:57,cd:3:Candela:50 aid_change:1

1099
<6>[   51.868640] bl_level:47,cd:2:Candela:40 aid_change:1

1100
<6>[   51.915336] bl_level:37,cd:1:Candela:30 aid_change:1

1101
<3>[   51.964169] init: untracked pid 3099 exited

1102
<6>[   52.000305] bl_level:20,cd:0:Candela:20 aid_change:1

1103
<3>[   54.098641] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0

1104
<6>[   54.115122] set_esd_disable is called

1105
<6>[   54.220204] Sensors unset: 32767

1106
<6>[   54.222188] Sensors set: 0

1107
<6>[   54.222340] Sensors unset: 32767

1108
<6>[   54.250846] request_suspend_state: sleep (0->3) at 54249206244 (2013-03-31

1109
 21:46:29.587814298 UTC)

1110
<6>[   54.251335] cypress_power_off is finished.

1111
<6>[   54.251335] Early Suspend:ESD IRQ is disabled

1112
<5>[   54.251335] mms_ts 3-0048: mms_ts_suspend: users=1

1113
<1>[   54.251365] cpufreq_gov_suspend_gov_DENIED2:

1114
<1>[   54.254875] cpufreq_gov_suspend_gov_SCHED_DENIED2:

1115
<7>[   54.259606] [TSP] release_all_fingers

1116
<6>[   54.260766] tsp 1.8V off is finished.

1117
<6>[   54.261162] tsp 3.3V off is finished.

1118
<4>[   54.311674] dhd_early_suspend: enter

1119
<4>[   54.311704] dhd_set_suspend: force extra Suspend setting

1120
<4>[   54.334442] Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode

1121
 0x15

1122
<6>[   54.335510] mipi_samsung_disp_early_suspend

1123
<6>[   54.335510] set_esd_disable is called

1124
<3>[   54.371677] dtv_pipe is not configured yet

1125
<7>[   54.384770] footswitch_disable: fs_mdp

1126
<6>[   54.386784] [@@@@@mpu_dev_early_suspend@@@@@]

1127
<6>[   54.386815] [mpu_early_notifier_callback] event = 3

1128
<6>[   54.386906] Sensors unset: 32767

1129
<6>[   54.387089] sec_bat_early_suspend[BATT]...

1130
<6>[   54.387120] active wake lock radio-interface

1131
<6>[   54.387120] PM: Syncing filesystems...

1132
<6>[   54.387150] active wake lock PowerManagerService.Broadcasts

1133
<6>[   54.387150] active wake lock PowerManagerService

1134
<6>[   54.387150] active wake lock msm_otg

1135
<6>[   54.387150] active wake lock wlan_rx_wake, time left 16

1136
<6>[   54.526629] sync done.

1137
<6>[   55.222127] light_enable_store,new_value=1

1138
<6>[   55.224141] cm36651_poll_delay_store, poll_delay = 80000000

1139
<6>[   55.308103] light_enable_store,new_value=0

1140
<6>[   61.442697] max17040_work : VCELL:3752mV, AVGVCELL:3739mV

1141
<6>[   61.442697] max17040_work : Raw SOC:1566%, SOC:14%

1142
<6>[   61.443674] max17040_work : CONFIG:0x1c85, RATE:0x2000

1143
<6>[   61.444132] max17040_work : STATUS:0xff01, temperature:28

1144
<6>[   61.450755] max17040 13-0036: a0bbh,531fh,0000h,1100h,0000h,1c85h,ffffh,ff

1145
ffh,ffffh,ff00h,2000h,077dh,ff01h,ffffh,

1146
<3>[   62.756111] init: untracked pid 3107 exited

1147
<3>[   62.809613] init: untracked pid 3101 exited

1148
<6>[   72.684846] request_suspend_state: wakeup (3->0) at 72683236449 (2013-03-3

1149
1 21:46:48.021844503 UTC)

1150
<6>[   72.684907] sec_bat_late_resume[BATT]...

1151
<6>[   72.684907] [@@@@@mpu_dev_early_resume@@@@@]

1152
<6>[   72.684907] Sensors set: 0

1153
<6>[   72.684938] [mpu_early_notifier_callback] event = 4

1154
<6>[   72.702121] TIMERIRQ_START : period=70

1155
<6>[   72.702243] Sensors set: 112

1156
<7>[   72.704501] footswitch_enable: fs_mdp

1157
<6>[   72.705569] <6>MPL-accmpu6050_set_odr:69

1158
<6>[   72.705661] <6>MPL-accODR : 14285 (69)mHz

1159
<6>[   72.706729] is negative Mode On = 0

1160
<6>[   72.706729] mipi_samsung_disp_late_resumedhd_late_resume: enter

1161
<4>[   72.706790] dhd_set_suspend: Remove extra suspend setting

1162
<5>[   72.726567] mms_ts 3-0048: mms_ts_resume: users=1

1163
<6>[   72.727025] tsp 1.8V on is finished.

1164
<6>[   72.727544] tsp 3.3V on is finished.

1165
<6>[   72.751716] Active Reset: Resettig LCD 1...0..1

1166
<6>[   72.815107] mipi_samsung_manufacture_id: manufacture_id1=a2

1167
<6>[   72.815199] mipi_samsung_manufacture_id: manufacture_id2=60

1168
<6>[   72.815260] mipi_samsung_manufacture_id: manufacture_id3=90

1169
<6>[   72.815290] mipi_samsung_manufacture_id: manufacture_id=11ba6090

1170
<6>[   72.815290] reset_gamma_level

1171
<6>[   72.815290] Select 4.8 = 0(60)

1172
<6>[   72.816786] binder: 1357:1710 transaction failed 29189, size 100-4

1173
<6>[   72.816969] binder: 1357:1710 transaction failed 29189, size 100-4

1174
<5>[   72.851854] mms_ts 3-0048: TA disconnect!!!

1175
<1>[   72.852220] cpufreq_gov_resume_gov_DENIED:

1176
<1>[   72.852250] cpufreq_gov_resume_gov_SCHED_DENIED2: row

1177
<6>[   72.852250] Late Resume:ESD IRQ is enabled

1178
<6>[   72.856462] cypress_power_on is finished.

1179
<6>[   72.964962] set_esd_enable is called

1180
<6>[   73.006561] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 177

1181
780000

1182
<7>[   73.023073] [Touchkey] autocal Enabled

1183
<3>[   73.023134] cypress_touchkey 16-0020: not real interrupt (1).

1184
<6>[   73.072119] bl_level:10,cd:0:Candela:20 aid_change:1

1185
<3>[   73.330169] init: untracked pid 3112 exited

1186
<6>[   73.461681] set_esd_enable_work_func is called

1187
<6>[   74.219105] light_enable_store,new_value=1

1188
<6>[   74.220723] cm36651_poll_delay_store, poll_delay = 200000000

1189
<6>[   74.222829] cm36651_poll_delay_store, poll_delay = 80000000

1190
<6>[   74.306882] light_enable_store,new_value=0

1191
<6>[   84.460064] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

1192
<6>[   84.961727] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

1193
<6>[   84.961757] sec_bat_monitor_work: battery check is present (1 time )

1194
<6>[   84.963192] [battery] level(14), vcell(3727500), therm(290)

1195
<6>[   84.963192] [battery] cable_type(1), chg_status(1), health(1)

1196
<6>[   84.963192] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

1197
<1>[   87.898336] store_UV_mV_table: 24

1198
<6>[   87.907675] gamma_cell_determine ldi_revision:96

1199
<6>[   87.907797] generate_gray_scale end

1200
<3>[   88.639829] init: untracked pid 3676 exited

1201
<6>[   91.522661] max17040_work : VCELL:3737mV, AVGVCELL:3725mV

1202
<6>[   91.522661] max17040_work : Raw SOC:1566%, SOC:14%

1203
<6>[   91.523607] max17040_work : CONFIG:0x1c85, RATE:0x2000

1204
<6>[   91.524095] max17040_work : STATUS:0xff01, temperature:29

1205
<6>[   91.530718] max17040 13-0036: e0bah,531fh,0000h,1100h,0000h,1c85h,ffffh,ff

1206
ffh,ffffh,ff00h,2000h,077dh,ff01h,ffffh,

1207
<6>[  121.602655] max17040_work : VCELL:3732mV, AVGVCELL:3725mV

1208
<6>[  121.602655] max17040_work : Raw SOC:1585%, SOC:14%

1209
<6>[  121.603601] max17040_work : CONFIG:0x1c85, RATE:0x3d00

1210
<6>[  121.604089] max17040_work : STATUS:0xff01, temperature:28

1211
<6>[  121.610712] max17040 13-0036: a0bah,b41fh,0000h,1100h,0000h,1c85h,ffffh,ff

1212
ffh,ffffh,ff00h,3d00h,077dh,ff01h,ffffh,

1213
<6>[  121.618068] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

1214
<6>[  122.121715] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

1215
<6>[  122.121745] sec_bat_monitor_work: battery check is present (1 time )

1216
<6>[  122.123210] [battery] level(14), vcell(3736250), therm(287)

1217
<6>[  122.123241] [battery] cable_type(1), chg_status(1), health(1)

1218
<6>[  122.123241] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

1219
<6>[  151.682679] max17040_work : VCELL:3741mV, AVGVCELL:3735mV

1220
<6>[  151.682679] max17040_work : Raw SOC:1585%, SOC:14%

1221
<6>[  151.683625] max17040_work : CONFIG:0x1c85, RATE:0x3a00

1222
<6>[  151.684083] max17040_work : STATUS:0xff01, temperature:28

1223
<6>[  151.690553] max17040 13-0036: 10bbh,b41fh,0000h,1100h,0000h,1c85h,ffffh,ff

1224
ffh,ffffh,ff00h,3a00h,077dh,ff01h,ffffh,

1225
<6>[  152.129894] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

1226
<6>[  152.631863] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

1227
<6>[  152.631924] sec_bat_monitor_work: battery check is present (1 time )

1228
<6>[  152.635189] [battery] level(14), vcell(3766250), therm(287)

1229
<6>[  152.635220] [battery] cable_type(1), chg_status(1), health(1)

1230
<6>[  152.635251] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

1231
<6>[  181.763833] max17040_work : VCELL:3745mV, AVGVCELL:3746mV

1232
<6>[  181.763863] max17040_work : Raw SOC:1585%, SOC:14%

1233
<6>[  181.765786] max17040_work : CONFIG:0x1c85, RATE:0x3a00

1234
<6>[  181.766763] max17040_work : STATUS:0xff01, temperature:28

1235
<6>[  181.782328] max17040 13-0036: 10bbh,b41fh,0000h,1100h,0000h,1c85h,ffffh,ff

1236
ffh,ffffh,ff00h,3a00h,077dh,ff01h,ffffh,

1237
<6>[  182.669739] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

1238
<6>[  183.171768] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

1239
<6>[  183.171829] sec_bat_monitor_work: battery check is present (1 time )

1240
<6>[  183.174912] [battery] level(14), vcell(3750000), therm(289)

1241
<6>[  183.174942] [battery] cable_type(1), chg_status(1), health(1)

1242
<6>[  183.174973] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

1243
<3>[  196.601281] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0

1244
<6>[  196.606043] Sensors unset: 32767

1245
<6>[  196.611750] Sensors set: 0

1246
<6>[  196.611872] Sensors unset: 32767

1247
<6>[  196.617762] set_esd_disable is called

1248
<6>[  196.759560] request_suspend_state: sleep (0->3) at 196757919787 (2013-03-3

1249
1 21:48:52.096497321 UTC)

1250
<6>[  196.760201] cypress_power_off is finished.

1251
<6>[  196.760231] Early Suspend:ESD IRQ is disabled

1252
<5>[  196.760262] mms_ts 3-0048: mms_ts_suspend: users=1

1253
<1>[  196.760292] cpufreq_gov_suspend_gov_DENIED2:

1254
<1>[  196.768625] cpufreq_gov_suspend_gov_SCHED_DENIED2:

1255
<7>[  196.776835] [TSP] release_all_fingers

1256
<6>[  196.781748] tsp 1.8V off is finished.

1257
<6>[  196.782237] tsp 3.3V off is finished.

1258
<4>[  196.841690] dhd_early_suspend: enter

1259
<4>[  196.841721] dhd_set_suspend: force extra Suspend setting

1260
<4>[  196.864489] Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode

1261
 0x15

1262
<6>[  196.865527] mipi_samsung_disp_early_suspend

1263
<6>[  196.865527] set_esd_disable is called

1264
<3>[  196.901693] dtv_pipe is not configured yet

1265
<7>[  196.915092] footswitch_disable: fs_mdp

1266
<6>[  196.920189] [@@@@@mpu_dev_early_suspend@@@@@]

1267
<6>[  196.920189] [mpu_early_notifier_callback] event = 3

1268
<6>[  196.920311] Sensors unset: 32767

1269
<6>[  196.920494] sec_bat_early_suspend[BATT]...

1270
<6>[  196.920524] active wake lock PowerManagerService.Broadcasts

1271
<6>[  196.920524] active wake lock msm_otg

1272
<6>[  196.920524] active wake lock wlan_rx_wake, time left 86

1273
<6>[  196.920555] PM: Syncing filesystems...

1274
<6>[  196.945399] sync done.

1275
<6>[  211.863818] max17040_work : VCELL:3810mV, AVGVCELL:3758mV

1276
<6>[  211.863848] max17040_work : Raw SOC:1585%, SOC:14%

1277
<6>[  211.865832] max17040_work : CONFIG:0x1c85, RATE:0x2b00

1278
<6>[  211.866839] max17040_work : STATUS:0xff01, temperature:28

1279
<6>[  211.881214] max17040 13-0036: 80beh,b41fh,0000h,1100h,0000h,1c85h,ffffh,ff

1280
ffh,ffffh,ff00h,2b00h,077dh,ff01h,ffffh,

1281
<6>[  226.884205] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

1282
<6>[  227.391759] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

1283
<6>[  227.391759] sec_bat_monitor_work: battery check is present (1 time )

1284
<6>[  227.393254] [battery] level(14), vcell(3710000), therm(288)

1285
<6>[  227.393254] [battery] cable_type(1), chg_status(1), health(1)

1286
<6>[  227.393254] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

1287
<6>[  241.983854] max17040_work : VCELL:3817mV, AVGVCELL:3751mV

1288
<6>[  241.983915] max17040_work : Raw SOC:1603%, SOC:14%

1289
<6>[  241.985869] max17040_work : CONFIG:0x1c85, RATE:0x4500

1290
<6>[  241.986876] max17040_work : STATUS:0xff01, temperature:28

1291
<6>[  242.001312] max17040 13-0036: e0beh,1420h,0000h,1100h,0000h,1c85h,ffffh,ff

1292
ffh,ffffh,ff00h,4500h,077dh,ff01h,ffffh,

1293
<6>[  258.018220] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

1294
<6>[  258.521715] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

1295
<6>[  258.521745] sec_bat_monitor_work: battery check is present (1 time )

1296
<6>[  258.523210] [battery] level(14), vcell(3820000), therm(287)

1297
<6>[  258.523210] [battery] cable_type(1), chg_status(1), health(1)

1298
<6>[  258.523210] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

1299
<6>[  258.770517] mmc0: mmc_start_bkops: raw_bkops_status=0x3, from_exception=0

1300
<6>[  258.770547] mmc0: mmc_start_bkops: Starting bkops

1301
<6>[  272.063787] max17040_work : VCELL:3812mV, AVGVCELL:3778mV

1302
<6>[  272.063848] max17040_work : Raw SOC:1603%, SOC:14%

1303
<6>[  272.065771] max17040_work : CONFIG:0x1c85, RATE:0x4500

1304
<6>[  272.066748] max17040_work : STATUS:0xff01, temperature:28

1305
<6>[  272.080207] max17040 13-0036: a0beh,1420h,0000h,1100h,0000h,1c85h,ffffh,ff

1306
ffh,ffffh,ff00h,4500h,077dh,ff01h,ffffh,

1307
<6>[  288.531207] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm

1308
<6>[  289.031771] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm

1309
<6>[  289.031802] sec_bat_monitor_work: battery check is present (1 time )

1310
<6>[  289.034915] [battery] level(15), vcell(3822500), therm(287)

1311
<6>[  289.034945] [battery] cable_type(1), chg_status(1), health(1)

1312
<6>[  289.034976] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)

1313
<6>[  289.035861] [fg] p:1622, s1:15, s2:14, v:3822500, t:0

1314
<6>[  302.143903] max17040_work : VCELL:3826mV, AVGVCELL:3809mV

1315
<6>[  302.143934] max17040_work : Raw SOC:1622%, SOC:15%

1316
<6>[  302.145917] max17040_work : CONFIG:0x1c85, RATE:0x6400

1317
<6>[  302.146925] max17040_work : STATUS:0xff01, temperature:28

1318
<6>[  302.160811] max17040 13-0036: 50bfh,7520h,0000h,1100h,0000h,1c85h,ffffh,ff

1319
ffh,ffffh,ff00h,6400h,077dh,ff01h,ffffh,
        

    


            


                                


        

            



                
    

        Public Pastes
    

    
            

    

                    

        

    





    


    
    
    
    
    
    
    
    




    


    



                

            We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.             OK, I Understand
        

    
                

            

                
                    
                
            

            

                Not a member of Pastebin yet?

                Sign Up, it unlocks many cool features!