SHOW:
|
|
- or go back to the newest paste.
| 1 | #include <Adafruit_NeoPixel.h> | |
| 2 | #define PIN 6 | |
| 3 | #define NUMPIXELS 10 | |
| 4 | Adafruit_NeoPixel pixels(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800); | |
| 5 | // defines pins numbers | |
| 6 | #define trigPin 11 | |
| 7 | #define echoPin 10 | |
| 8 | void setup() {
| |
| 9 | pinMode(trigPin, OUTPUT); // trigPin as an Output | |
| 10 | pinMode(echoPin, INPUT); // echoPin as an Input | |
| 11 | Serial.begin(9600); // Starts the serial communication | |
| 12 | pixels.begin(); // INITIALIZE NeoPixel strip object | |
| 13 | pixels.clear(); // Set all pixel colors to 'off' | |
| 14 | } | |
| 15 | void loop() {
| |
| 16 | int distance = measureDistance(); | |
| 17 | // Prints the distance on the Serial Monitor | |
| 18 | Serial.print("Distance: ");
| |
| 19 | Serial.println(distance); | |
| 20 | set_colour(distance); | |
| 21 | delay(200); | |
| 22 | } | |
| 23 | int measureDistance(){
| |
| 24 | long duration; | |
| 25 | int distance; | |
| 26 | // Clears the trigPin | |
| 27 | digitalWrite(trigPin, LOW); | |
| 28 | delayMicroseconds(2); | |
| 29 | // Sets the trigPin on HIGH state for 10 micro seconds | |
| 30 | digitalWrite(trigPin, HIGH); | |
| 31 | delayMicroseconds(10); | |
| 32 | digitalWrite(trigPin, LOW); | |
| 33 | // Reads the echoPin, returns the sound wave travel time in microseconds | |
| 34 | duration = pulseIn(echoPin, HIGH); | |
| 35 | // Calculating the distance | |
| 36 | distance= duration*0.034/2; | |
| 37 | return distance; | |
| 38 | } | |
| 39 | void set_colour(int distance){
| |
| 40 | int r,g,b,l; | |
| 41 | if(distance>200){
| |
| 42 | r=0; | |
| 43 | g=255; | |
| 44 | b=0; | |
| 45 | l=10; | |
| 46 | } else {
| |
| 47 | r=map(distance,0,200,255,0); | |
| 48 | g=map(distance,0,200,0,255); | |
| 49 | b=0; | |
| 50 | l=map(distance,0,200,1,10); | |
| 51 | } | |
| 52 | for(int i=0; i<10; i++){
| |
| 53 | if(i<l) | |
| 54 | pixels.setPixelColor(i, pixels.Color(r, g, b)); | |
| 55 | else | |
| 56 | pixels.setPixelColor(i, pixels.Color(0,0,0)); | |
| 57 | } | |
| 58 | pixels.show(); // Send the updated pixel colors to the hardware. | |
| 59 | } | |
| 60 |