View difference between Paste ID: bUb7hqUG and 0B2CdyYZ
SHOW: | | - or go back to the newest paste.
1-
octave:2> pkg load serial
1+
octave:9> sif = "/dev/ttyUSB0";
2-
octave:3> sif = "/dev/ttyUSB0";
2+
octave:10> s = serial(sif, 115200);
3-
octave:4> s = serial(sif, 115200);
3+
octave:11> 
4-
octave:5> 
4+
octave:11> # Example 1: blocking read, returns exactly 6 bytes (old behavior)
5-
octave:5> # Example 1: blocking read, returns exactly 6 bytes (old behavior)
5+
octave:11> srl_flush(s) ; srl_write(s, "Hello1!"); [data, count] = srl_read(s, 7); char(data), count
6-
octave:5> srl_flush(s) ; srl_write(s, "Hello1!"); [data, count] = srl_read(s, 7); char(data), count
6+
7
count =  7
8
octave:12> 
9-
octave:6> 
9+
octave:12> # Example 2: non-blocking read, returns 6 bytes from buffer immediately (n.b. tried to read up to 10, only 6 written to the buffer)
10-
octave:6> # Example 2: non-blocking read, returns 6 bytes from buffer immediately (n.b. tried to read up to 10, only 6 written to the buffer)
10+
octave:12> srl_timeout(s, 0); srl_flush(s) ; srl_write(s, "Hello2!"); sleep(1); tic(); [data, count] = srl_read(s, 10); toc(); char(data), count
11-
octave:6> srl_timeout(s, 0); srl_flush(s) ; srl_write(s, "Hello2!"); sleep(1); tic(); [data, count] = srl_read(s, 10); toc(); char(data), count
11+
Elapsed time is 0.00024 seconds.
12-
Elapsed time is 0.00025 seconds.
12+
13
count =  7
14
octave:13> 
15-
octave:7> 
15+
octave:13> # Example 3: non-blocking read, returns 6 bytes after a timeout of 3.0 seconds (n.b. tried to read up to 10)
16-
octave:7> # Example 3: non-blocking read, returns 6 bytes after a timeout of 3.0 seconds (n.b. tried to read up to 10)
16+
octave:13> srl_timeout(s, 30); srl_flush(s) ; srl_write(s, "Hello3!"); sleep(1); tic(); [data, count] = srl_read(s, 10); toc(); char(data), count
17-
octave:7> srl_timeout(s, 30); srl_flush(s) ; srl_write(s, "Hello3!"); sleep(1); tic(); [data, count] = srl_read(s, 10); toc(); char(data), count
17+
18
ans = Hello3!
19
count =  7
20
octave:14> 
21-
octave:8> 
21+
octave:14> # Example 4: non-blocking read, returns no data after timeout of 3.0 seconds (n.b. there was no data available to the interface before reading)
22-
octave:8> # Example 4: non-blocking read, returns no data after timeout of 3.0 seconds (n.b. there was no data available to the interface before reading)
22+
octave:14> srl_timeout(s, 30); srl_flush(s) ; sleep (1); tic(); [data, count] = srl_read(s, 10); toc(); char(data), count,  srl_close(s);
23-
octave:8> srl_timeout(s, 30); srl_flush(s) ; sleep (1); tic(); [data, count] = srl_read(s, 10); toc(); char(data), count,  srl_close(s);
23+
24
Elapsed time is 3 seconds.
25
ans = 
26-
count = 0
26+
count = 0
27
octave:15>