SHOW:
|
|
- or go back to the newest paste.
1 | disk1: | |
2 | ||
3 | === START OF INFORMATION SECTION === | |
4 | Model Family: Seagate IronWolf | |
5 | Device Model: ST8000VN0022-2EL112 | |
6 | Serial Number: ZA1F3X3P | |
7 | LU WWN Device Id: 5 000c50 0b58187b5 | |
8 | Firmware Version: SC61 | |
9 | User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
10 | Sector Sizes: 512 bytes logical, 4096 bytes physical | |
11 | Rotation Rate: 7200 rpm | |
12 | Form Factor: 3.5 inches | |
13 | Device is: In smartctl database [for details use: -P show] | |
14 | ATA Version is: ACS-3 T13/2161-D revision 5 | |
15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
16 | Local Time is: Fri Aug 25 15:24:04 2023 CEST | |
17 | SMART support is: Available - device has SMART capability. | |
18 | SMART support is: Enabled | |
19 | ||
20 | === START OF READ SMART DATA SECTION === | |
21 | SMART overall-health self-assessment test result: PASSED | |
22 | ||
23 | General SMART Values: | |
24 | Offline data collection status: (0x82) Offline data collection activity | |
25 | was completed without error. | |
26 | Auto Offline Data Collection: Enabled. | |
27 | Self-test execution status: ( 0) The previous self-test routine completed | |
28 | without error or no self-test has ever | |
29 | been run. | |
30 | Total time to complete Offline | |
31 | data collection: ( 567) seconds. | |
32 | Offline data collection | |
33 | capabilities: (0x7b) SMART execute Offline immediate. | |
34 | Auto Offline data collection on/off support. | |
35 | Suspend Offline collection upon new | |
36 | command. | |
37 | Offline surface scan supported. | |
38 | Self-test supported. | |
39 | Conveyance Self-test supported. | |
40 | Selective Self-test supported. | |
41 | SMART capabilities: (0x0003) Saves SMART data before entering | |
42 | power-saving mode. | |
43 | Supports SMART auto save timer. | |
44 | Error logging capability: (0x01) Error logging supported. | |
45 | General Purpose Logging supported. | |
46 | Short self-test routine | |
47 | recommended polling time: ( 1) minutes. | |
48 | Extended self-test routine | |
49 | recommended polling time: ( 795) minutes. | |
50 | Conveyance self-test routine | |
51 | recommended polling time: ( 2) minutes. | |
52 | SCT capabilities: (0x50bd) SCT Status supported. | |
53 | SCT Error Recovery Control supported. | |
54 | SCT Feature Control supported. | |
55 | SCT Data Table supported. | |
56 | ||
57 | SMART Attributes Data Structure revision number: 10 | |
58 | Vendor Specific SMART Attributes with Thresholds: | |
59 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
60 | 1 Raw_Read_Error_Rate 0x000f 100 064 044 Pre-fail Always - 0 | |
61 | 3 Spin_Up_Time 0x0003 088 084 000 Pre-fail Always - 0 | |
62 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 150 | |
63 | 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
64 | 7 Seek_Error_Rate 0x000f 095 060 045 Pre-fail Always - 3273534927 | |
65 | 9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 24131 | |
66 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
67 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 153 | |
68 | 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
69 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
70 | 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 | |
71 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
72 | 190 Airflow_Temperature_Cel 0x0022 055 041 040 Old_age Always - 45 (Min/Max 40/51) | |
73 | 191 G-Sense_Error_Rate 0x0032 080 080 000 Old_age Always - 40601 | |
74 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 183 | |
75 | 193 Load_Cycle_Count 0x0032 052 052 000 Old_age Always - 96203 | |
76 | 194 Temperature_Celsius 0x0022 045 059 000 Old_age Always - 45 (0 17 0 0 0) | |
77 | 195 Hardware_ECC_Recovered 0x001a 100 001 000 Old_age Always - 0 | |
78 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
79 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
80 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
81 | 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 18839 (61 204 0) | |
82 | 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 175768757292 | |
83 | 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 360292517124 | |
84 | ||
85 | SMART Error Log Version: 1 | |
86 | No Errors Logged | |
87 | ||
88 | SMART Self-test log structure revision number 1 | |
89 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
90 | # 1 Extended offline Completed without error 00% 16901 - | |
91 | ||
92 | SMART Selective self-test log data structure revision number 1 | |
93 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
94 | 1 0 0 Not_testing | |
95 | 2 0 0 Not_testing | |
96 | 3 0 0 Not_testing | |
97 | 4 0 0 Not_testing | |
98 | 5 0 0 Not_testing | |
99 | Selective self-test flags (0x0): | |
100 | After scanning selected spans, do NOT read-scan remainder of disk. | |
101 | If Selective self-test is pending on power-up, resume after 0 minute delay. | |
102 | ||
103 | ||
104 | ||
105 | ||
106 | ||
107 | ||
108 | disk2: | |
109 | - | Device Model: ST8000VN004-2M2101 |
109 | + | |
110 | - | Serial Number: WSD262YA |
110 | + | |
111 | - | LU WWN Device Id: 5 000c50 0d6091f98 |
111 | + | |
112 | - | Firmware Version: SC60 |
112 | + | |
113 | Serial Number: ZA16BSKW | |
114 | LU WWN Device Id: 5 000c50 0a1c873b9 | |
115 | Firmware Version: SC61 | |
116 | User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
117 | Sector Sizes: 512 bytes logical, 4096 bytes physical | |
118 | - | ATA Version is: ACS-4 (minor revision not indicated) |
118 | + | |
119 | - | SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) |
119 | + | |
120 | - | Local Time is: Fri Aug 25 15:24:32 2023 CEST |
120 | + | |
121 | ATA Version is: ACS-3 T13/2161-D revision 5 | |
122 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
123 | Local Time is: Sat Aug 26 00:58:00 2023 CEST | |
124 | SMART support is: Available - device has SMART capability. | |
125 | SMART support is: Enabled | |
126 | ||
127 | === START OF READ SMART DATA SECTION === | |
128 | SMART overall-health self-assessment test result: PASSED | |
129 | ||
130 | General SMART Values: | |
131 | Offline data collection status: (0x82) Offline data collection activity | |
132 | was completed without error. | |
133 | Auto Offline Data Collection: Enabled. | |
134 | Self-test execution status: ( 0) The previous self-test routine completed | |
135 | - | data collection: ( 559) seconds. |
135 | + | |
136 | been run. | |
137 | Total time to complete Offline | |
138 | data collection: ( 567) seconds. | |
139 | Offline data collection | |
140 | capabilities: (0x7b) SMART execute Offline immediate. | |
141 | Auto Offline data collection on/off support. | |
142 | Suspend Offline collection upon new | |
143 | command. | |
144 | Offline surface scan supported. | |
145 | Self-test supported. | |
146 | Conveyance Self-test supported. | |
147 | Selective Self-test supported. | |
148 | SMART capabilities: (0x0003) Saves SMART data before entering | |
149 | power-saving mode. | |
150 | Supports SMART auto save timer. | |
151 | Error logging capability: (0x01) Error logging supported. | |
152 | General Purpose Logging supported. | |
153 | - | recommended polling time: ( 713) minutes. |
153 | + | |
154 | recommended polling time: ( 1) minutes. | |
155 | Extended self-test routine | |
156 | recommended polling time: ( 701) minutes. | |
157 | Conveyance self-test routine | |
158 | recommended polling time: ( 2) minutes. | |
159 | SCT capabilities: (0x50bd) SCT Status supported. | |
160 | SCT Error Recovery Control supported. | |
161 | SCT Feature Control supported. | |
162 | SCT Data Table supported. | |
163 | ||
164 | - | 1 Raw_Read_Error_Rate 0x000f 082 064 044 Pre-fail Always - 164988559 |
164 | + | |
165 | - | 3 Spin_Up_Time 0x0003 088 082 000 Pre-fail Always - 0 |
165 | + | |
166 | - | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 76 |
166 | + | |
167 | 1 Raw_Read_Error_Rate 0x000f 083 064 044 Pre-fail Always - 222857812 | |
168 | - | 7 Seek_Error_Rate 0x000f 080 060 045 Pre-fail Always - 103958565 |
168 | + | |
169 | - | 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7529 |
169 | + | |
170 | 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 8 | |
171 | - | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 78 |
171 | + | |
172 | - | 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0 |
172 | + | |
173 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
174 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 214 | |
175 | - | 190 Airflow_Temperature_Cel 0x0022 059 042 040 Old_age Always - 41 (Min/Max 37/47) |
175 | + | |
176 | - | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 53 |
176 | + | |
177 | - | 193 Load_Cycle_Count 0x0032 075 075 000 Old_age Always - 50537 |
177 | + | |
178 | - | 194 Temperature_Celsius 0x0022 041 058 000 Old_age Always - 41 (0 15 0 0 0) |
178 | + | |
179 | - | 195 Hardware_ECC_Recovered 0x001a 082 064 000 Old_age Always - 164988559 |
179 | + | |
180 | 191 G-Sense_Error_Rate 0x0032 089 089 000 Old_age Always - 22913 | |
181 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 110 | |
182 | 193 Load_Cycle_Count 0x0032 027 027 000 Old_age Always - 147527 | |
183 | - | 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 2443 (92 177 0) |
183 | + | |
184 | - | 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 56513055590 |
184 | + | |
185 | - | 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 99231413473 |
185 | + | |
186 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
187 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
188 | 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 34782 (151 145 0) | |
189 | 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 246003272009 | |
190 | 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 497182059017 | |
191 | ||
192 | SMART Error Log Version: 1 | |
193 | No Errors Logged | |
194 | ||
195 | SMART Self-test log structure revision number 1 | |
196 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
197 | # 1 Extended offline Completed without error 00% 35418 - | |
198 | ||
199 | SMART Selective self-test log data structure revision number 1 | |
200 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
201 | 1 0 0 Not_testing | |
202 | 2 0 0 Not_testing | |
203 | 3 0 0 Not_testing | |
204 | 4 0 0 Not_testing | |
205 | 5 0 0 Not_testing | |
206 | Selective self-test flags (0x0): | |
207 | After scanning selected spans, do NOT read-scan remainder of disk. | |
208 | If Selective self-test is pending on power-up, resume after 0 minute delay. | |
209 | ||
210 | ||
211 | ||
212 | ||
213 | ||
214 | ||
215 | disk3: | |
216 | ||
217 | === START OF INFORMATION SECTION === | |
218 | Model Family: Seagate IronWolf | |
219 | Device Model: ST8000VN0022-2EL112 | |
220 | Serial Number: ZA1F4Q91 | |
221 | LU WWN Device Id: 5 000c50 0b58f4b6d | |
222 | Firmware Version: SC61 | |
223 | User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
224 | Sector Sizes: 512 bytes logical, 4096 bytes physical | |
225 | Rotation Rate: 7200 rpm | |
226 | Form Factor: 3.5 inches | |
227 | Device is: In smartctl database [for details use: -P show] | |
228 | ATA Version is: ACS-3 T13/2161-D revision 5 | |
229 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
230 | Local Time is: Sat Aug 26 00:59:04 2023 CEST | |
231 | SMART support is: Available - device has SMART capability. | |
232 | SMART support is: Enabled | |
233 | ||
234 | === START OF READ SMART DATA SECTION === | |
235 | SMART overall-health self-assessment test result: PASSED | |
236 | ||
237 | General SMART Values: | |
238 | Offline data collection status: (0x82) Offline data collection activity | |
239 | was completed without error. | |
240 | Auto Offline Data Collection: Enabled. | |
241 | Self-test execution status: ( 0) The previous self-test routine completed | |
242 | without error or no self-test has ever | |
243 | been run. | |
244 | Total time to complete Offline | |
245 | data collection: ( 567) seconds. | |
246 | Offline data collection | |
247 | capabilities: (0x7b) SMART execute Offline immediate. | |
248 | Auto Offline data collection on/off support. | |
249 | Suspend Offline collection upon new | |
250 | command. | |
251 | Offline surface scan supported. | |
252 | Self-test supported. | |
253 | Conveyance Self-test supported. | |
254 | Selective Self-test supported. | |
255 | SMART capabilities: (0x0003) Saves SMART data before entering | |
256 | power-saving mode. | |
257 | Supports SMART auto save timer. | |
258 | Error logging capability: (0x01) Error logging supported. | |
259 | General Purpose Logging supported. | |
260 | Short self-test routine | |
261 | recommended polling time: ( 1) minutes. | |
262 | Extended self-test routine | |
263 | recommended polling time: ( 800) minutes. | |
264 | Conveyance self-test routine | |
265 | recommended polling time: ( 2) minutes. | |
266 | SCT capabilities: (0x50bd) SCT Status supported. | |
267 | SCT Error Recovery Control supported. | |
268 | SCT Feature Control supported. | |
269 | SCT Data Table supported. | |
270 | ||
271 | SMART Attributes Data Structure revision number: 10 | |
272 | Vendor Specific SMART Attributes with Thresholds: | |
273 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
274 | 1 Raw_Read_Error_Rate 0x000f 081 064 044 Pre-fail Always - 121728162 | |
275 | 3 Spin_Up_Time 0x0003 088 084 000 Pre-fail Always - 0 | |
276 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 165 | |
277 | 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
278 | 7 Seek_Error_Rate 0x000f 095 060 045 Pre-fail Always - 3127223860 | |
279 | 9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 24267 | |
280 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
281 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 168 | |
282 | 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
283 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
284 | 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 | |
285 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
286 | 190 Airflow_Temperature_Cel 0x0022 056 042 040 Old_age Always - 44 (Min/Max 43/44) | |
287 | 191 G-Sense_Error_Rate 0x0032 091 091 000 Old_age Always - 19992 | |
288 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 204 | |
289 | 193 Load_Cycle_Count 0x0032 054 054 000 Old_age Always - 92162 | |
290 | 194 Temperature_Celsius 0x0022 044 058 000 Old_age Always - 44 (0 15 0 0 0) | |
291 | 195 Hardware_ECC_Recovered 0x001a 008 001 000 Old_age Always - 121728162 | |
292 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
293 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
294 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
295 | 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 18992 (192 74 0) | |
296 | 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 187657872700 | |
297 | 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 370409201222 | |
298 | ||
299 | SMART Error Log Version: 1 | |
300 | No Errors Logged | |
301 | ||
302 | SMART Self-test log structure revision number 1 | |
303 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
304 | # 1 Extended offline Completed without error 00% 16902 - | |
305 | ||
306 | SMART Selective self-test log data structure revision number 1 | |
307 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
308 | 1 0 0 Not_testing | |
309 | 2 0 0 Not_testing | |
310 | 3 0 0 Not_testing | |
311 | 4 0 0 Not_testing | |
312 | 5 0 0 Not_testing | |
313 | Selective self-test flags (0x0): | |
314 | After scanning selected spans, do NOT read-scan remainder of disk. | |
315 | If Selective self-test is pending on power-up, resume after 0 minute delay. | |
316 | ||
317 | ||
318 | ||
319 | ||
320 | ||
321 | ||
322 | disk4: | |
323 | === START OF INFORMATION SECTION === | |
324 | Device Model: WDC WD80EFBX-68AZZN0 | |
325 | Serial Number: VGK54APG | |
326 | LU WWN Device Id: 5 000cca 0beec9cad | |
327 | Firmware Version: 85.00A85 | |
328 | User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
329 | Sector Sizes: 512 bytes logical, 4096 bytes physical | |
330 | Rotation Rate: 7200 rpm | |
331 | Form Factor: 3.5 inches | |
332 | Device is: Not in smartctl database [for details use: -P showall] | |
333 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 | |
334 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) | |
335 | Local Time is: Wed Aug 30 22:20:08 2023 CEST | |
336 | SMART support is: Available - device has SMART capability. | |
337 | SMART support is: Enabled | |
338 | ||
339 | === START OF READ SMART DATA SECTION === | |
340 | SMART overall-health self-assessment test result: PASSED | |
341 | ||
342 | General SMART Values: | |
343 | Offline data collection status: (0x82) Offline data collection activity | |
344 | was completed without error. | |
345 | Auto Offline Data Collection: Enabled. | |
346 | Self-test execution status: ( 0) The previous self-test routine completed | |
347 | without error or no self-test has ever | |
348 | been run. | |
349 | Total time to complete Offline | |
350 | data collection: ( 87) seconds. | |
351 | Offline data collection | |
352 | capabilities: (0x5b) SMART execute Offline immediate. | |
353 | Auto Offline data collection on/off support. | |
354 | Suspend Offline collection upon new | |
355 | command. | |
356 | Offline surface scan supported. | |
357 | Self-test supported. | |
358 | No Conveyance Self-test supported. | |
359 | Selective Self-test supported. | |
360 | SMART capabilities: (0x0003) Saves SMART data before entering | |
361 | power-saving mode. | |
362 | Supports SMART auto save timer. | |
363 | Error logging capability: (0x01) Error logging supported. | |
364 | General Purpose Logging supported. | |
365 | Short self-test routine | |
366 | recommended polling time: ( 2) minutes. | |
367 | Extended self-test routine | |
368 | recommended polling time: ( 934) minutes. | |
369 | SCT capabilities: (0x003d) SCT Status supported. | |
370 | SCT Error Recovery Control supported. | |
371 | SCT Feature Control supported. | |
372 | SCT Data Table supported. | |
373 | ||
374 | SMART Attributes Data Structure revision number: 16 | |
375 | Vendor Specific SMART Attributes with Thresholds: | |
376 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
377 | 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 | |
378 | 2 Throughput_Performance 0x0004 126 126 054 Old_age Offline - 116 | |
379 | 3 Spin_Up_Time 0x0007 197 197 024 Pre-fail Always - 434 (Average 390) | |
380 | 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 77 | |
381 | 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 | |
382 | 7 Seek_Error_Rate 0x000a 100 100 067 Old_age Always - 0 | |
383 | 8 Seek_Time_Performance 0x0004 128 128 020 Old_age Offline - 18 | |
384 | 9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 7048 | |
385 | 10 Spin_Retry_Count 0x0012 100 100 060 Old_age Always - 0 | |
386 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 76 | |
387 | 192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 4122 | |
388 | 193 Load_Cycle_Count 0x0012 097 097 000 Old_age Always - 4122 | |
389 | 194 Temperature_Celsius 0x0002 138 138 000 Old_age Always - 47 (Min/Max 15/65) | |
390 | 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
391 | 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 | |
392 | 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 | |
393 | 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 | |
394 | ||
395 | SMART Error Log Version: 1 | |
396 | No Errors Logged | |
397 | ||
398 | SMART Self-test log structure revision number 1 | |
399 | No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
400 | ||
401 | SMART Selective self-test log data structure revision number 1 | |
402 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
403 | 1 0 0 Not_testing | |
404 | 2 0 0 Not_testing | |
405 | 3 0 0 Not_testing | |
406 | 4 0 0 Not_testing | |
407 | 5 0 0 Not_testing | |
408 | Selective self-test flags (0x0): | |
409 | After scanning selected spans, do NOT read-scan remainder of disk. | |
410 | If Selective self-test is pending on power-up, resume after 0 minute delay. | |
411 | ||
412 | ||
413 |