View difference between Paste ID: X4jMdfbW and wudX7tsy

-STEP by STEP Raptor on Debian 6.06 AMD 64 for Testing only
+STEP by STEP Raptor on Debian 6.06 AMD 64 for Testing only ( X3 Ram=8 G HD=80 G)
-ip 192.168.3.2
+Installasi awal paket hanya openssh server dan basic system dengan partisi ext4 sbb :
-name server 192.168.3.1
+
-hostname proxy
+
-domain local.net.work
+
 /cache-1	25 G	noatime	/dev/sda5
-HD 80 G
+/raptorcache	40 G	noatime	/dev/sda6
 /var		5 G
 
-/cache-1	40 G	noatime	/dev/sda5
+
-/raptorcache	25 G	noatime	/dev/sda6
+
 
 Optimalkan file system untuk cache
 
 tune2fs -m 0 /dev/sda5
 tune2fs -m 0 /dev/sda6
 tune2fs -o journal_data_writeback /dev/sda5
 tune2fs -o journal_data_writeback /dev/sda6
 
 Disabled fsck (file system check)
 
 nano /etc/fstab
 /cache-1  ext4  noatime,barrier=0,nodiratime,relatime,errors=remount-ro,data=writeback   0   0
 /raptorcache  ext4  noatime,barrier=0,nodiratime,relatime,errors=remount-ro,data=writeback   0   0
 
 touch raptor10b-64-debian.sh; chmod 777 raptor10b-64-debian.sh
 nano raptor10b-64-debian.sh
-/raptorcache  ext4  noatime,barrier=0,nodiratime,relatime,errors=remount-ro,data=writeback   0   0
+
 insert all script below, save, than run by type "bash raptor10b-64-debian.sh"
 
 # Copy mulai dari sini
 # bash raptor10b-64-debian.sh
 echo 4 > /proc/sys/net/ipv4/tcp_fin_timeout
 mv /etc/sysctl.conf /etc/sysctl.conf_
 touch /etc/sysctl.conf
 
 echo "kernel.panic = 30
 kernel.panic_on_oops = 30
 kernel.sysrq = 0
 kernel.core_uses_pid = 1
 kernel.msgmnb = 65536
 kernel.msgmax = 65536
 fs.file-max = 65536
 vm.swappiness = 0
 vm.vfs_cache_pressure=50
 vm.mmap_min_addr = 4096
 vm.overcommit_ratio = 0
 vm.overcommit_memory = 0
 kernel.shmmax = 268435456
 kernel.shmall = 268435456
 vm.min_free_kbytes = 65536
 net.ipv6.conf.all.disable_ipv6 = 1
 net.ipv4.tcp_syncookies = 1
 net.ipv4.tcp_syn_retries = 5
 net.ipv4.tcp_synack_retries = 2
 net.ipv4.tcp_max_syn_backlog = 4096
 net.ipv4.ip_forward = 0
 net.ipv4.conf.all.forwarding = 0
 net.ipv4.conf.default.forwarding = 0
 net.ipv4.conf.all.accept_source_route = 0
 net.ipv4.conf.default.accept_source_route = 0
 net.ipv4.conf.all.rp_filter = 1
 net.ipv4.conf.default.rp_filter = 1
 net.ipv4.conf.all.accept_redirects = 0
 net.ipv4.conf.default.accept_redirects = 0
 net.ipv4.conf.all.log_martians = 0
 net.ipv4.conf.default.log_martians = 0
 net.ipv4.tcp_fin_timeout = 15
 net.ipv4.tcp_keepalive_time = 300
 net.ipv4.tcp_keepalive_probes = 5
 net.ipv4.tcp_keepalive_intvl = 15
 net.ipv4.conf.all.bootp_relay = 0
 net.ipv4.conf.all.proxy_arp = 0
 net.ipv4.tcp_dsack = 1
 net.ipv4.tcp_sack = 1
 net.ipv4.tcp_fack = 1
 net.ipv4.tcp_timestamps = 1
 net.ipv4.icmp_echo_ignore_all = 0
 net.ipv4.icmp_echo_ignore_broadcasts = 1
 net.ipv4.icmp_ignore_bogus_error_responses = 1
 net.ipv4.ip_local_port_range = 1024 65535
 net.ipv4.tcp_rfc1337 = 1
 net.ipv4.tcp_congestion_control = cubic
 net.ipv4.tcp_window_scaling = 1
 net.ipv4.tcp_mem = 65536 131072 262144
 net.ipv4.udp_mem = 65536 131072 262144
 net.ipv4.tcp_rmem = 8192 87380 16777216
 net.ipv4.udp_rmem_min = 16384
 net.core.rmem_default = 87380
 net.core.rmem_max = 16777216
 net.ipv4.tcp_wmem = 8192 65536 16777216
 net.ipv4.udp_wmem_min = 16384
 net.core.wmem_default = 65536
 net.core.wmem_max = 16777216
 net.core.somaxconn = 32768
 net.core.netdev_max_backlog = 4096
 net.core.dev_weight = 64
 net.core.optmem_max = 65536
 net.ipv4.tcp_max_tw_buckets = 1440000
 net.ipv4.tcp_tw_recycle = 1
 net.ipv4.tcp_tw_reuse = 1
 net.ipv4.tcp_max_orphans = 16384
 net.ipv4.tcp_orphan_retries = 0
 net.ipv4.ipfrag_high_thresh = 512000
 net.ipv4.ipfrag_low_thresh = 446464
 net.ipv4.tcp_no_metrics_save = 1
 net.ipv4.tcp_moderate_rcvbuf = 1
 net.unix.max_dgram_qlen = 50
 net.ipv4.neigh.default.gc_thresh3 = 2048
 net.ipv4.neigh.default.gc_thresh2 = 1024
 net.ipv4.neigh.default.gc_thresh1 = 32
 net.ipv4.neigh.default.gc_interval = 30
 net.ipv4.neigh.default.proxy_qlen = 96
 net.ipv4.neigh.default.unres_qlen = 6
 net.ipv4.tcp_ecn = 1
 net.ipv4.tcp_reordering = 3
 net.ipv4.tcp_retries2 = 15
 net.ipv4.tcp_retries1 = 3" >> /etc/sysctl.conf
 
 echo "ulimit -Hn 65536
 ulimit -Sn 65535">> /etc/profile
 
 echo 65536 > /proc/sys/fs/file-max
 echo "*         soft        nofile          65536" >> /etc/security/limits.conf
 echo "*         hard        nofile          65536" >> /etc/security/limits.conf
 echo "root      soft        nofile          65536" >> /etc/security/limits.conf
 echo "root      hard        nofile          65536" >> /etc/security/limits.conf
 echo "proxy     soft        nofile          65536" >> /etc/security/limits.conf
 echo "proxy     hard        nofile          65536" >> /etc/security/limits.conf
 echo "session required        pam_limits.so" >> /etc/pam.d/common-session
 modprobe ip_conntrack
 
 echo "ip_conntrack">> /etc/modules
 
 echo deb http://kambing.ui.ac.id/debian/ squeeze main non-free contrib | tee -a /etc/apt/sources.list
 echo deb-src http://kambing.ui.ac.id/debian/ squeeze main non-free contrib | tee -a /etc/apt/sources.list
-apt-get -y update
+
 IPSERV=$(ifconfig eth0 | grep 'inet addr:' | cut -d: -f2 | awk '{ print $1}')
-IPSERV=$(ifconfig eth0 | grep 'inet addr:' | cut -d: -f2 | awk '{ print $1}')
+HOST_NAME=$(hostname -a)
-HOST_NAME="local.war.net"
+DOMAIN_NAME=$(hostname -d)
 
 sleep 2
 
 apt-get update
 mkdir /cache-1 && chmod 777 /cache-1 && chown proxy:proxy /cache-1
-cd ..
+
-mkdir /cache-1
+echo Y | apt-get install squid3 squid3-cgi ccze
-chmod 777 /cache-1
+
-cd /root
+
 touch /etc/squid3/denegados.lst
-echo Y | apt-get install squid3
+
 
 rm -rf /etc/squid3/squid.conf
 touch /etc/squid3/squid.conf
 
 echo "#========================== Squid 3.x Conf ===========================#
 # Port Option SQUID 3.x
 #----------------------------------------------------------------------
 http_port 3128 intercept
 visible_hostname www.$DOMAIN_NAME
 icp_port 0
 #----------------------------------------------------------------------
 error_directory /usr/share/squid3/errors/English
-visible_hostname proxy.$HOST_NAME
+
 acl denegados url_regex -i "/etc/squid3/denegados.lst"
 #----------------------------------------------------------------------
 # DNS Option
 #----------------------------------------------------------------------
 dns_nameservers 8.8.8.8 8.8.4.4
 dns_retransmit_interval 5 seconds
 dns_timeout 2 minutes
 #----------------------------------------------------------------------
 acl manager proto cache_object
 acl localhost src 127.0.0.1/32 ::1
 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
 acl CONNECT method CONNECT
 ####################################################################
 # acl localnet src 10.0.0.0/8     # RFC1918 possible internal network
 # acl localnet src 172.16.0.0/12  # RFC1918 possible internal network
 acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
 ####################################################################
-acl Safe_ports port 80          # http
+acl Safe_ports port 21 70 80 210 280 443 488 563 591 631 777 901 81 3128 1025-65535
-acl Safe_ports port 21          # ftp
+acl SSL_ports port 443 563 81
-acl SSL_ports port 443
+
-acl Safe_ports port 443         # https
+
-acl Safe_ports port 70          # gopher
+
-acl Safe_ports port 210         # wais
+
-acl Safe_ports port 1025-65535  # unregistered ports
+
-acl Safe_ports port 280         # http-mgmt
+
-acl Safe_ports port 488         # gss-http
+
-acl Safe_ports port 591         # filemaker
+
-acl Safe_ports port 777         # multiling http
+# Always allow localhost connections
-acl Safe_ports port 631         # cups
+
-acl Safe_ports port 873         # rsync
+
-acl Safe_ports port 901         # SWAT
+# Allow local network(s) on interface(s)
-acl Safe_ports port 1863        # MSN
+http_access allow localnet
-#acl SSL_ports port 443          # https
+
-acl SSL_ports port 563          # snews
+# Default block all to be sure
-acl SSL_ports port 873          # rsync
+http_access deny all
 #----------------------------------------------------------------------
 coredump_dir /cache-1
 #----------------------------------------------------------------------
 # Reserved memory for cache
 # It is recommended that you take approx. 5 MB of RAM per 1GB assigned to cache_dir
 #----------------------------------------------------------------------
 cache_mem 125 MB
 #----------------------------------------------------------------------
 # Maximum size of a file in cache memory
 #----------------------------------------------------------------------
 maximum_object_size_in_memory 128 KB
 #----------------------------------------------------------------------
 # Maximum and minimum size of files in the disk cache
-cache_mem 50 MB
+
 maximum_object_size 30 MB
 minimum_object_size 4 KB
 #----------------------------------------------------------------------
 # Replace cache files when disk cache reach 96% full
 #----------------------------------------------------------------------
 cache_swap_low 92
 cache_swap_high 96
 #----------------------------------------------------------------------
 # Total HD space to be used by the cache, number of folders,
 # Number of subfolders in cache
 # 25000 = 25 GB
 #----------------------------------------------------------------------
 cache_dir aufs /cache-1 25000	25	256
 #----------------------------------------------------------------------
 # Standard update cache
 # 1 month = 10080 mins, 1 day = 1440 mins
 #----------------------------------------------------------------------
-# 10000 = 10 GB
+refresh_pattern -i .(gif|png|jp?g|ico|bmp|tiff?)$ 14400 80% 43200 reload-into-ims
 refresh_pattern -i .(swf|htm|html|shtm|shtml|nub)$ 14400 80% 43200 reload-into-ims
-cache_dir aufs /cache-1 10000  16 256
+refresh_pattern -i .(rpm|cab|deb|exe|msi|msu|zip|tar|xz|bz|bz2|lzma|gz|tgz|rar|bin|7z|doc?|xls?|ppt?|pdf|nth|psd|sis)$ 14400 80% 43200
 refresh_pattern -i .(avi|iso|wav|mid|mp?|mpe?g?|mpeg|mov|3gp|wm?|flv|x-flv|axd)$ 14400 80% 43200
 refresh_pattern -i .(qtm?|viv|au|ram?|snd|sit|hqx|arj|lzh|lha|txt|rtf|tex|latex|class|js|ico)$ 14400 80% 43200
 refresh_pattern -i \.a[0-9][0-9]$ 14400 80% 43200
 refresh_pattern -i \.r[0-9][0-9]$ 14400 80% 43200
-refresh_pattern -i \.jpg$ 14400 80% 43200 reload-into-ims
+
-refresh_pattern -i \.gif$ 14400 80% 43200 reload-into-ims
+
-refresh_pattern -i \.png$ 14400 80% 43200 reload-into-ims
+
-refresh_pattern -i \.jpeg$ 14400 80% 43200 reload-into-ims
+
-refresh_pattern -i \.bmp$ 14400 80% 43200 reload-into-ims
+
-refresh_pattern -i \.tif$ 14400 80% 43200 reload-into-ims
+refresh_pattern (Release|Package(.gz)*)$       0       20%     2880
-refresh_pattern -i \.tiff$ 14400 80% 43200 reload-into-ims
+
-refresh_pattern -i \.swf$ 14400 80% 43200 reload-into-ims
+
-refresh_pattern -i \.html$ 10 20% 4320 reload-into-ims
+
-refresh_pattern -i \.htm$ 10 20% 4320 reload-into-ims
+
-refresh_pattern -i \.shtml$ 10 20% 4320 reload-into-ims
+
-refresh_pattern -i \.shtm$ 10 20% 4320 reload-into-ims
+
-refresh_pattern -i \.nub$ 2880 80% 21600 reload-into-ims
+
-refresh_pattern -i \.exe$ 14400 80% 43200
+
-refresh_pattern -i \.zip$ 14400 80% 43200
+
-refresh_pattern -i \.mov$ 14400 80% 43200
+
-refresh_pattern -i \.mpe?g?$ 14400 80% 43200
+
-refresh_pattern -i \.avi$ 14400 80% 43200
+
-refresh_pattern -i \.qtm?$ 14400 80% 43200
+
-refresh_pattern -i \.viv$ 14400 80% 43200
+
-refresh_pattern -i \.wav$ 14400 80% 43200
+
-refresh_pattern -i \.aiff?$ 14400 80% 43200
+
-refresh_pattern -i \.au$ 14400 80% 43200
+
-refresh_pattern -i \.ram?$ 14400 80% 43200
+
-refresh_pattern -i \.snd$ 14400 80% 43200
+
-refresh_pattern -i \.mid$ 14400 80% 43200
+
-refresh_pattern -i \.mp2$ 14400 80% 43200
+
-refresh_pattern -i \.mp3$ 14400 80% 43200
+
-refresh_pattern -i \.sit$ 14400 80% 43200
+
-refresh_pattern -i \.zip$ 14400 80% 43200
+
-refresh_pattern -i \.hqx$ 14400 80% 43200
+
-refresh_pattern -i \.arj$ 14400 80% 43200
+
-refresh_pattern -i \.lzh$ 14400 80% 43200
+
-refresh_pattern -i \.lha$ 14400 80% 43200
+# Sites that are denied to store files in squid cache
-refresh_pattern -i \.cab$ 14400 80% 43200
+
-refresh_pattern -i \.rar$ 14400 80% 43200
+
-refresh_pattern -i \.tar$ 14400 80% 43200
+
-refresh_pattern -i \.gz$ 14400 80% 43200
+
-refresh_pattern -i \.z$ 14400 80% 43200
+# Denying cache for files with extension. *.asx and. *.asf | streaming |
 #----------------------------------------------------------------------
 acl asxf url_regex -i .(asx|asf)$
-refresh_pattern -i \.txt$ 14400 80% 43200
+cache deny asxf" >> /etc/squid3/squid.conf
-refresh_pattern -i \.pdf$ 14400 80% 43200
+
-refresh_pattern -i \.doc$ 14400 80% 43200
+
-refresh_pattern -i \.rtf$ 14400 80% 43200
+
-refresh_pattern -i \.tex$ 14400 80% 43200
+
-refresh_pattern -i \.latex$ 14400 80% 43200
+
-refresh_pattern -i \.class$ 14400 80% 43200
+
-refresh_pattern -i \.js$ 14400 80% 43200
+
-refresh_pattern -i \.ico$ 14400 80% 43200
+
 
 sleep 3
 
 IPSERV=$(ifconfig eth0 | grep 'inet addr:' | cut -d: -f2 | awk '{ print $1}')
 HOST_NAME=$(hostname -a)
-#refresh_pattern (Release|Package(.gz)*)$       0       20%     2880
+DOMAIN_NAME=$(hostname -d)
 
 echo Y | apt-get install sqlite gcc libsqlite3-dev libapache2-mod-php5 php-db libstdc++6 g++ unzip libmysqlclient15-dev libblkid-dev libcurl3-dev lynx ffmpeg lsb-release sudo make php5-dev php-pear apache2-prefork-dev libpcre3-dev
 
 sleep 3
 
 wget http://www.raptorcache.com/install/64/raptor64.tar.gz
 cp raptor64.tar.gz /tmp
 tar -xzvf /tmp/raptor64.tar.gz -C /
 rm -rf raptor64.tar.gz
 chmod a+x /usr/sbin/raptor
 
 mkdir /var/log/raptor && mkdir /var/tmp/raptor && mkdir /var/run/raptor && mkdir /raptorcache &&
 chmod a+rwx /var/log/raptor && chmod a+rwx /var/tmp/raptor && chmod a+rwx /var/run/raptor && chmod a+x /etc/init.d/raptor &&
 chown -R www-data /raptorcache/
 chmod -R 777 /raptorcache/
 umask 000 /raptorcache/
 
 echo "extension=pdo.so" >> /etc/php5/apache2/php.ini
 echo "vm.swappiness=10" >> /etc/sysctl.conf
 
 update-rc.d raptor defaults
 
 sleep 3
 
 echo "#----------------------------------------------------------------------
 acl raptor_lst url_regex -i \"/etc/raptor/raptor.lst\"
 cache deny raptor_lst
-# Sites that are denied to store files in squid cache
+
 dead_peer_timeout 2 seconds
 cache_peer_access $IPSERV allow raptor_lst
 cache_peer_access $IPSERV deny all
 #----------------------------------------------------------------------" >> /etc/squid3/squid.conf
-# Denying cache for files with extension. Asx and. Asf | streaming |
+
 sleep 3
-acl asx url_regex -i \.asx$
+
-cache deny asx
+wget http://www.raptorcache.com/install/clean/64/clean.zip
-acl asf url_regex -i \.asf$
+unzip clean.zip
-cache deny asf" >> /etc/squid3/squid.conf
+
 chmod 777 /etc/raptor/clean
 rm -rf clean.zip
 
 wget http://www.raptorcache.com/install/var/pluginmaker.tar.gz
 tar -xzvf pluginmaker.tar.gz
 mv pluginmaker /etc/raptor/
 rm -rf pluginmaker.tar.gz
 
 touch /etc/raptor/raptor.lst
 
 wget http://www.raptorcache.com/install/64/plugins/plugins.tar.gz
 tar -xzvf plugins.tar.gz
-IPSERV=$(ifconfig eth0 | grep 'inet addr:' | cut -d: -f2 | awk '{ print $1}')
+
 rm -rf plugins.tar.gz
 clear
 chmod 777 /etc/raptor/plugins/*
 chmod 777 /etc/raptor/cl0
 
-echo Y | apt-get install apache2
+
 wget -O /usr/lib/libmysqlclient.so.16 http://www.joemg.host56.com/lib/64bits/libmysqlclient.so.16
 
 # wget http://repo.undip.ac.id/ubuntu//pool/main/m/mysql-5.1/libmysqlclient16_5.1.67-0ubuntu0.11.10.1_amd64.deb
-echo Y | apt-get install sqlite gcc libsqlite3-dev libapache2-mod-php5 php-db libstdc++6 g++ unzip
+# dpkg -i libmysqlclient16_5.1.67-0ubuntu0.11.10.1_amd64.deb
 
-echo Y | apt-get install libmysqlclient15-dev libblkid-dev libcurl3-dev lynx ffmpeg lsb-release sudo
+wget http://security.debian.org/debian-security/pool/updates/main/m/mysql-5.1/libmysqlclient16_5.1.66-0+squeeze1_amd64.deb
 dpkg -i libmysqlclient16_5.1.67-0ubuntu0.11.10.1_amd64.deb
-echo Y | apt-get install make php5-dev php-pear apache2-prefork-dev libpcre3-dev
+
 /etc/init.d/raptor start
 
-cd /root
+
 
 sleep 3
 
 ## Raptor
 # m 	h 	dom 	mon 	dow 	user	command
 59		1	*		*		*		root	/etc/raptor/./clean 45
 30		23	*		*		*		root	squid3 -k rotate
 *		*/1	*		*		*		root	/etc/raptor/./cl0
 59		22	*		*		*		root	/etc/raptor/rprotate
 */2		*	*		*		*		root	serv
 */1		*	*		*		*		root	vnstat -u -i eth0
 
 sleep 6
 #-------------------------------------------------------------------------------------------
 clear
 echo ""
 echo ""
 echo "+-------------------------------------------------------------+"
 echo "|                       Installing Mysql                      |"
 echo "|   It is important to set the password of Mysql = raptor     |"
 echo "+-------------------------------------------------------------+"
 echo Press enter to continue...
 read -n 0 -ers
 
 echo Y | apt-get install mysql-server mysql-client php5-mysql &&
 echo Y | aptitude install php5-cgi &&
 
 wget http://www.raptorcache.com/install/var/raptor.sql
 cp raptor.sql /var/tmp/
 rm -rf raptor.sql
 echo
 
 mysql -u root -praptor << eof
-wget http://www.raptorcache.com/install/clean/64/clean.zip
+
-unzip clean.zip
+
 mysql -u root -praptor raptor < /var/tmp/raptor.sql
 
 sleep 6
 
 IPSERV=$(ifconfig eth0 | grep 'inet addr:' | cut -d: -f2 | awk '{ print $1}')
 HOST_NAME=$(hostname -a)
 DOMAIN_NAME=$(hostname -d)
 
 sleep 3
 
 mv /etc/hosts /etc/hosts_
 touch /etc/hosts
 
 echo "127.0.0.1	localhost.localdomain	localhost
 $IPSERV	$HOST_NAME.$DOMAIN_NAME	$HOST_NAME
 #
 ::1	localhost	ip6-localhost	ip6-loopback
 fe00::0 ip6-localnet
 fe00::0 ip6-mcastprefix
 ff02:1 ip6-allnodes
 ff02::2 ip6-allrouters
 ff02::3 ip6-allhosts" >> /etc/hosts
 
 sleep 3
 
 mv /etc/network/interfaces /etc/network/interfaces_
 touch
 echo "# This file describes the network interfaces available on your system
-echo "## Raptor
+# and how to activate them. For more information, see interfaces(5).
-# min(0-59)  hour(0-23)  days(1-31)  month(1-12)  weekly(0-7)   user   command
+
-59              1               *       *               *       root    /etc/raptor/./clean 45
+# The loopback network interface
-30              23              *       *               *       root    squid3 -k rotate
+auto lo
-*              */1              *       *               *       root    /etc/raptor/./cl0
+iface lo inet loopback
-59              22              *       *               *       root    /etc/raptor/rprotate
+
-*/2             *               *       *               *       root    serv
+# The primary network interface
-*/1             *               *       *               *       root    vnstat -u -i eth0" >> /etc/crontab
+allow-hotplug eth0
 iface eth0 inet static
      address $IPSERV
      netmask 255.255.255.0
      network 192.168.1.0
      broadcast 192.168.1.255
      gateway 192.168.1.1
      dns-nameservers 127.0.0.1 8.8.8.8 8.8.4.4
      search $HOST_NAME.$DOMAIN_NAME" >> /etc/network/interfaces
 
 sleep 3
 
 echo Y | apt-get install bind9 dnsutils bind9-doc resolvconf
 
 sleep 3
 
 mv /etc/bind/named.conf.options /etc/bind/named.conf.options_
-echo Y | apt-get -f upgrade &&
+wget http://data-servers.googlecode.com/files/named.conf.options
 
 echo "include "/etc/bind/zones.rfc1918";
 };" > /etc/bind/named.conf.local
 
 echo "logging {
 category lame-servers {null; };
 category edns-disabled { null; };
 };" >> /etc/bind/named.conf.local
 
 echo "ServerName $HOST_NAME.$DOMAIN_NAME" >> /etc/apache2/apache2.conf
 
 mv /etc/apache2/httpd.conf /etc/apache2/httpd.conf_
 mkdir /etc/cacti
-IPSERV=$(ifconfig eth0 | grep 'inet addr:' | cut -d: -f2 | awk '{ print $1}')
+
-HOST_NAME="local.war.net"
+
 <VirtualHost *:82>
  DocumentRoot /var/raptor
  ServerName www.$DOMAIN_NAME
  ErrorLog /var/log/virtual82-error_log
  CustomLog /var/log/virtual82-access_log common
  </VirtualHost>
-echo "127.0.0.1 localhost.localdomain   localhost
+
-$IPSERV proxy.$HOST_NAME        proxy
+
  DocumentRoot /var/www/sarg
-::1     localhost       ip6-localhost   ip6-loopback
+ ServerName www.$DOMAIN_NAME
  </VirtualHost>" >> /etc/apache2/httpd.conf
 
 sleep 6
 
 clear
 
 sleep 3
 echo "
-mv /etc/hostname /etc/hostname_
+
-touch /etc/hostname
+deb http://backports.debian.org/debian-backports squeeze-backports main" >> /etc/apt/sources.list
 apt-get update
-echo "proxy.$HOST_NAME" >> /etc/hostname
+
 mv /etc/sarg/sarg.conf  /etc/sarg/sarg.conf_old
-mv /etc/resolv.conf /etc/resolv.conf_
+
-touch /etc/resolv.conf
+
 echo "
-echo "search proxy.$HOST_NAME
+
-nameserver 127.0.0.1
+
-nameserver 8.8.8.8
+
-nameserver 8.8.4.4" >> /etc/resolv.conf
+sarg -x
 
 sleep 1
 wget http://joemg.host56.com/wpanel/raptor.tar.gz
-echo Y | apt-get install bind9 dnsutils bind9-doc
+
 mv raptor /var/
 rm -rf raptor.tar.gz
 clear
-mv /etc/bind/named.conf.options /etc/bind/named.conf.options_old
+
-touch /etc/bind/named.conf.options
+
 chmod 777 /etc/raptor/raptor.lst
-echo "options {
+
-        directory "/var/cache/bind";
+
-        forward only;
+
-        forwarders { 8.8.8.8; 8.8.4.4; };
+
-        auth-nxdomain no; # conform to RFC1035
+
-        listen-on-v6 { none; };
+
-        listen-on { 127.0.0.1; };
+
-        version none;
+
-};" >> /etc/bind/named.conf.options
+
 mv /etc/snmp/snmpd.conf  /etc/snmp/snmpd.conf_
 touch /etc/snmp/snmpd.conf
-logging {
+echo "rocommunity  public
 syslocation  "PDC, Proxy DataCenter"
 syscontact  admin@$DOMAIN_NAME" >>  /etc/snmp/snmpd.conf
 rm -rf /etc/default/snmpd
 wget http://www.raptorcache.com/install/var/snmpd
-echo "ServerName proxy.$HOST_NAME" >> /etc/apache2/apache2.conf
+
 /etc/init.d/snmpd restart
 sleep 3
 clear
 echo ""
 echo ""
 echo "+--------------------------------------------------------------------------------------+"
 echo "|                                    Installing Cacti                                  |"
- ServerName www.raptorcache.com
+
 echo "+--------------------------------------------------------------------------------------+"
 echo Press enter to continue...
 read -n 0 -ers
 echo Y | apt-get install cacti
 wget http://www.raptorcache.com/install/var/raptor-cacti.sql
 mv raptor-cacti.sql /var/tmp/
- ServerName www.raptorcache.com
+
 sleep 1
 mv /etc/cacti/apache.conf /etc/cacti/apache.conf_
 touch /etc/cacti/apache.conf
 echo "Alias /graphcacti /usr/share/cacti/site
 
 <Directory /usr/share/cacti/site>
         Options +FollowSymLinks
         AllowOverride None
         order allow,deny
-# deb http://backports.debian.org/debian-backports squeeze-backports main" >> /etc/apt/sources.list
+
 
         AddType application/x-httpd-php .php
 
         <IfModule mod_php5.c>
                 php_flag magic_quotes_gpc Off
                 php_flag short_open_tag On
                 php_flag register_globals Off
                 php_flag register_argc_argv On
                 php_flag track_vars On
-sarg
+
                 php_value mbstring.func_overload 0
                 php_value include_path .
         </IfModule>
 
         DirectoryIndex index.php
 </Directory>" >> /etc/cacti/apache.conf
 /etc/init.d/apache2 restart
 
 echo Y | apt-get install vnstat
 vnstat -u -i eth0
 
 echo Y | apt-get install smartmontools lvm2 hdparm
 sleep 1
 
 echo Y | apt-get install lm-sensors
 clear
 echo ""
 echo ""
 echo "+---------------------------------------------+"
-mv /etc/snmp/snmpd.conf  /etc/snmp/snmpd.conf.old
+
 echo "+---------------------------------------------+"
-echo 'rocommunity  public
+
 read -n 0 -ers
-syscontact  [email protected]' >  /etc/snmp/snmpd.conf
+
 service module-init-tools restart
 /etc/init.d/module-init-tools restart
 echo "
 # DNS Cache
 */2               *               *       *               *       root    rndc dumpdb" >> /etc/crontab
 
 clear
 wget http://www.raptorcache.com/install/var/upload.cgi
 mv upload.cgi /usr/lib/cgi-bin/
 chmod 777 /usr/lib/cgi-bin/upload.cgi
 # echo Y | apt-get --purge remove sudo
 # echo Y | apt-get install sudo
 # echo "www-data  ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers
 # chmod 777/etc/sudoers
 clear
 
 echo | pecl install apc --with-apxs='/usr/bin/apxs2'
 echo "Alias /var/raptor/apc /usr/share/php/apc.php
 
 <Directory /usr/share/php/apc.php>
         Options +FollowSymLinks
         AllowOverride None
         order allow,deny
         allow from all
 
         AddType application/x-httpd-php .php
 
         <IfModule mod_php5.c>
                 php_flag magic_quotes_gpc Off
                 php_flag short_open_tag On
                 php_flag register_globals Off
                 php_flag register_argc_argv On
                 php_flag track_vars On
                 # this setting is necessary for some locales
                 php_value mbstring.func_overload 0
                 php_value include_path .
         </IfModule>
 
         DirectoryIndex index.php
 </Directory>" >> /etc/apache2/conf.d/apc.conf
 echo "extension=apc.so" >> /etc/php5/conf.d/apc.ini
 echo "; APC Configuration
 apc.enabled = 1
 ; Memory allocated to APC. Use Munin or APC Info to see if more is needed.
 apc.shm_size=32M
 ; rfc1867 allow file upload progression display.
 apc.rfc1867 = on" >> /etc/php5/conf.d/apc-config.ini
 clear
 rm -rf /var/tmp/*
 
 touch /sbin/tail-squid /sbin/tail-raptor
 echo "tail -f /var/log/squid3/access.log | ccze" >> /sbin/tail-squid
 echo "tail -f /var/log/squid3/access.log | ccze" >> /sbin/tail-raptor
 chmod 755 /sbin/tail-raptor /sbin/tail-squid
 # chown root:root /sbin/tail-raptor /sbin/tail-squid
 
 iptables -F
 iptables -X
 iptables -t nat -F
 iptables -t nat -X
 iptables -t mangle -F
 iptables -t mangle -X
 iptables -P INPUT ACCEPT
 iptables -P OUTPUT ACCEPT
 iptables -A INPUT -s 192.168.0.0/16 -m state --state NEW -p tcp --dport 53 -j ACCEPT
 iptables -A INPUT -s 192.168.0.0/16 -m state --state NEW -p udp --dport 53 -j ACCEPT
 iptables -A INPUT -p tcp -s 192.168.0.0/16 --dport 80 -j ACCEPT
 iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3128
 iptables-save -c > /etc/iptables.up.rules
 
 echo ""
 echo "+==========================================================================+"
-echo Y | apt-get --purge remove sudo
+
-echo Y | apt-get install sudo
+
-echo "www-data  ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers
+
-chmod 777/etc/sudoers
+
 # Copy stop sini