View difference between Paste ID: W4GLNE39 and W1hkpwd6

-rednet.open("right")
+--[[ Get with
-names = peripheral.getNames()
+  pastebin get W4GLNE39 on
-sides = {"right", "left", "top", "bottom", "front", "back"}
+ or
-for i = 1, #names do
+  std pb W4GLNE39 on
-  c = peripheral.wrap(names[i])
+  std ld on on
-  print(names[i])
+
-  ifcomp = true
+  Aren't I great with names??
-  for a = 1, #sides do
+--]]
-    if names[i] == sides[a] then
+
-      ifcomp = false
+local rebootCompsAtStart = false
-    end
+--Set the above variable to true if you want On to reboot all PCs at startup.
-    if ifcomp == true then
+
-      c.turnOn()
+local configFile = "/.on_conf"
-    end
+
-  end
+local tArg = {...}
 if tArg[1] == "rmconf" then
-print("All should be on")
+	fs.delete(configFile)
 end
 
 if tArg[1] == "conf" then
 	return shell.run("edit " .. configFile)
 end
 
 
 local compNames = {}
 local compIDs = {}
 local names = peripheral.getNames()
 
 local function loadConfig()
 	if fs.exists(configFile) == false then
 		file = fs.open(configFile, "w")
 		file.writeLine("background = false")
 		file.writeLine("onOrOff = 'on'")
 		file.writeLine("animations = true")
 		file.writeLine("spoofMode = false")
 		file.writeLine("loadBarChar = '@'")
 		file.writeLine("compList = '/.complist'")
 		file.writeLine("monitorTextScale = 0.5")
 		file.writeLine("startupProg = nil")
 		file.close()
 	end
 
 	dofile(configFile)
 end
 
 local function writeCompFileList()
 	file = fs.open(compList, "w")
 	file.writeLine("List of last connected computers. Do not modify.")
 	for a = 1, #compNames do
 		if compNames[a] ~= nil and compIDs[a] ~= nil then
 			file.writeLine("  '" .. compNames[a] .. "', id:" .. compIDs[a])
 		end
 	end
 	file.writeLine("\nFile generated by On by LDDestroier/EldidiStroyrr (same guy).")
 	file.close()
 end
 
 local function loadAnimaion()
 	screenX, screenY = term.getSize()
 	ani_spinLine = {
 		".",
 		"|",
 		"|",
 		"|",
 		"|",
 		" "
 	}
 	ani_loadBar = {  --I'm sure there's a better way of doing this, but it's not to my knowledge.
 		"[      ]",
 		"[" .. loadBarChar.. "     ]",
 		"[" .. string.rep(loadBarChar, 2) .. "    ]",
 		"[" .. string.rep(loadBarChar, 3) .. "   ]",
 		"[ " .. string.rep(loadBarChar, 3) .. "  ]",
 		"[  " .. string.rep(loadBarChar, 3) .. " ]",
 		"[   " .. string.rep(loadBarChar, 3) .. "]",
 		"[    " .. string.rep(loadBarChar, 2) .. "]",
 		"[     " .. loadBarChar.. "]",
 		"[      ]",
 		"[      ]"
 	}
 end
 
 local function getBGColors() --I was getting used to the nomenclature
 	if background == false then
 		if colormode then
 			term.setBackgroundColor(128)
 		else
 			term.setBackgroundColor(1)
 		end
 	else
 		term.setBackgroundColor(colors.black)
 	end
 end
 
 local sides = {"right", "left", "top", "bottom", "front", "back"}
 
 local function getConfig()
 	local names = peripheral.getNames()
 	local isOpen = false
 	for k,v in pairs(sides) do
 	        if peripheral.getType(v)=="modem" then
 	                rednet.open(v)
 	                isOpen=true
 	        end
 	end
 
 	if term.isColor then  --Gotta make sure that normal computers aren't using colors!
 		if term.isColor() then
 			colormode = true
 		else
 			colormode = false
 		end
 	end
 
 	loadAnimaion()
 
 	getBGColors()
 
 	scr_x, scr_y = term.getSize()
 	itemThreshold = scr_y - 5
 end
 
 loadConfig()
 
 getConfig()
 
 for a = 1, #sides do
 	if peripheral.getType(sides[a]) == "monitor" then
 		local mon = peripheral.wrap(sides[a])
 		mon.setTextScale(monitorTextScale)
 	end
 end
 
 function round(num, idp)
 	local mult = 10^(idp or 0)
 	return math.floor(num * mult + 0.5) / mult
 end
 
 function getDefaultColors()
 	if colormode and background == false then
 		term.setTextColor(16)
 	else
 		term.setTextColor(colors.black)
 	end
 end
 
 function getCompNames() --Simply gets all computer names and puts them into a table and a readable text file.
 	compNames = {}
 	compIDs = {}
 	names = peripheral.getNames()
 	for a = 1, #names do
 		if string.find(names[a], "computer") then
 			local c = peripheral.wrap(names[a])
 			if c ~= nil then
 				table.insert(compNames, names[a])
 				table.insert(compIDs, c.getID())
 			end
 		end
 	end
 	if spoofMode then
 		table.insert(compNames, "computer_test1")
 		table.insert(compIDs, 1)
 		table.insert(compNames, "computer_test2")
 		table.insert(compIDs, 2)
 		table.insert(compNames, "computer_test3")
 		table.insert(compIDs, 5)
 		table.insert(compNames, "computer_test4")
 		table.insert(compIDs, 4)
 	end
 end
 
 local itemX, itemY, itemPosXes, itemPosYes, scrollOver, doesntFit
 
 local function printCompNames() --Prints all output to screen.
 	term.clear()
 	term.setCursorPos(1,1)
 	if background == false then
 		getDefaultColors()
 	end
 	if onOrOff == "on" then
 		write("Comps On'd:")
 	elseif onOrOff == "off" then
 		write("Comps Off'd:")
 	end
 	write(" (" .. #compNames .. ")\n")
 
 	itemX = 1
 	itemY = 2
 
 	itemPosXes = {}
 	itemPosYes = {}
 
 	scrollOver = 0
 	doesntFit = false
 
 	for a = 1, #compNames do
 		term.setCursorPos(itemX,itemY)
 		if compNames[a] ~= nil and compIDs[a] ~= nil then
 			if itemX <= 8 then
 				if itemY >= itemThreshold then
 					itemX = itemX + 25
 					itemY = 1
 				else
 					itemY = itemY + 1
 				end
 			else
 				if itemY >= scr_y - 1 then
 					itemX = itemX + 25
 					itemY = 1
 					scrollOver = scrollOver + 1
 				else
 					itemY = itemY + 1
 				end
 			end
 			posX, posY = term.getCursorPos()
 			scr_x, scr_y = term.getSize()
 			if scr_x - posX >= 25 then
 				write(" " .. compNames[a])
 				write(" (id:" .. compIDs[a] .. ")")
 				posX, posY = term.getCursorPos()
 				table.insert(itemPosXes, posX)
 				table.insert(itemPosYes, posY)
 			else
 				msg = "Screen is too small to list all computers"
 				local messageX = scr_x - string.len(msg)
 				term.setCursorPos(messageX,scr_y)
 				write(msg)
 				getDefaultColors()
 				getBGColors()
 				break
 			end
 		end
 	end
 	local menuY = scr_y - 3
 	term.setCursorPos(1,menuY)
 	print("'R': reboot all")
 	print("'B': run in background")
 	print("'X': exit")
 	writeCompFileList()
 	maximumItems = itemThreshold + (scr_y * scrollOver)
 end
 
 local function turnCompsOn()
 	for a = 1, #compNames do
 		c = peripheral.wrap(compNames[a])
 		if c ~= nil then
 			if onOrOff == "on" then
 				c.turnOn()
 			elseif onOrOff == "off" then
 				c.shutdown()
 			else
 				error("'onOrOff' is neither \"on\" or \"off\"")
 			end
 		end
 	end
 end
 
 local function rebootAllComps()
 	local normalCursorY = #compNames + 7
 	term.setCursorPos(1,normalCursorY)
 	oldLoadBarChar = loadBarChar
 	loadBarChar = "R"
 	loadAnimaion()
 	getCompNames()
 	for a = 1, #compNames do
 		local c = peripheral.wrap(compNames[a])
 		if c ~= nil then
 			c.reboot()
 		end
 	end
 	printCompNames()
 	sleep(0.1)
 	loadBarChar = oldLoadBarChar
 	loadAnimaion()
 end
 
 local function checkForComps() --Checks to see if there are any new computers, based on the compNames table.
 	while true do
 		oldCompNames = compNames
 		getCompNames()
 		turnCompsOn()
 		if textutils.serialize(compNames) ~= textutils.serialize(oldCompNames) then
 			if background == false then
 				printCompNames()
 				oldnames = names
 			end
 		end
 		sleep(0.15)
 	end
 end
 
 local function keyPress()
 	if startupProg then
 		background = true
 		term.clear()
 		term.setCursorPos(1,1)
 		shell.run(startupProg)
 		background = false
 		getConfig()
 		printCompNames()
 		turnCompsOn()
 		startupProg = nil
 	end
 	if background then
 		background = true
 		term.clear()
 		term.setCursorPos(1,1)
 		shell.run("/rom/programs/shell")
 		background = false
 		getConfig()
 		printCompNames()
 		turnCompsOn()
 	end
 	while true do
 		local event, key = os.pullEvent("char")
 		if key == "r" then
 			rebootAllComps()
 		end
 		if key == "x" then
 			term.setBackgroundColor(colors.black)
 			--term.setTextColor(1)
 			background = true
 			printCompNames()
 			return
 		end
 		if key == "b" then
 			background = true
 			term.setTextColor(colors.white)
 			term.setBackgroundColor(colors.black)
 			term.clear()
 			term.setCursorPos(1,1)
 			shell.run("/rom/programs/shell")
 			background = false
 			getConfig()
 			printCompNames()
 			turnCompsOn()
 		end
 	end
 end
 
 local function animateSpinLines()
 	while true do
 		for l = 1, #ani_spinLine do
 			if background == false then
 				for a = 1, #itemPosXes do
 					if itemPosXes[a] ~= nil then
 						drawX = (25 * round((itemPosXes[a] + 1) / 25) - 2)
 					end
 					if itemPosYes[a] ~= nil then
 						drawY = itemPosYes[a]
 					end
 					term.setTextColor(1)
 					if drawX <= scr_x and drawY <= scr_y then
 						term.setCursorPos(drawX,drawY)
 						c = peripheral.wrap(compNames[a])
 						if colormode then
 							term.setTextColor(1)
 						else
 							term.setTextColor(colors.black)
 						end
 						if c ~= nil then
 							if c.isOn() then
 								itemNumber = l + (drawY + 1)
 								if itemNumber > #ani_spinLine then
 									repeat
 										itemNumber = itemNumber - #ani_spinLine
 									until itemNumber <= #ani_spinLine
 								end
 								write(ani_spinLine[itemNumber])
 							else
 								write("*")
 							end
 						end
 					end
 				end
 				getDefaultColors()
 			end
 			sleep(0.05)
 		end
 	end
 end
 
 local function animateLoadBar()
 	while true do
 		for l = 1, #ani_loadBar do
 			if background == false then
 				local drawX = 16 + string.len(#compNames)
 				local drawY = 1
 				term.setCursorPos(drawX,drawY)
 				if colormode then
 					term.setTextColor(1)
 				else
 					term.setTextColor(colors.black)
 				end
 				write(ani_loadBar[l])
 			end
 			sleep(0.06)
 		end
 	end
 end
 
 getCompNames()
 printCompNames()
 
 if rebootCompsAtStart then
 	rebootAllComps()
 end
 
 if animations then
 	parallel.waitForAny(checkForComps, keyPress, animateSpinLines, animateLoadBar)
 else
 	parallel.waitForAny(checkForComps, keyPress)
 end
 
 normalCursorY = scr_y
 term.setCursorPos(1,normalCursorY)
 term.setTextColor(1)