View difference between Paste ID: Lv1SHsGc and PUy0adWE

--- Laser‑Guided Warp System (“ztc”) with H/I/O prompts and O‑key to run otc
+-- Laser-Guided Warp System (“ztc”) with H/I/O prompts and O-key to run otc
 
 -- 1) Wrap terminal + any attached monitors
 local screens = {}
 
 -- Terminal wrapper
 table.insert(screens, {
   clear              = function() term.clear(); term.setCursorPos(1,1) end,
   getSize            = function() return term.getSize() end,
   setTextColor       = term.setTextColor,
   setBackgroundColor = term.setBackgroundColor,
   setCursorPos       = term.setCursorPos,
   write              = term.write,
 })
 
 -- Monitor wrappers
 for _, side in ipairs(peripheral.getNames()) do
   if peripheral.getType(side) == "monitor" then
     local m = peripheral.wrap(side)
     table.insert(screens, {
       clear              = function() m.clear(); m.setCursorPos(1,1) end,
       getSize            = function() return m.getSize() end,
       setTextColor       = function(c) m.setTextColor(c) end,
       setBackgroundColor = function(c) m.setBackgroundColor(c) end,
       setCursorPos       = function(x,y) m.setCursorPos(x,y) end,
       write              = function(txt) m.write(txt) end,
       monitor            = m,
     })
   end
 end
 
--- 2) Auto‑scale monitors so at least 7 lines will fit
+-- 2) Auto-scale monitors so at least 7 lines will fit
 for _, s in ipairs(screens) do
   if s.monitor then
     local best = 0.5
     for _, scale in ipairs({1, 0.5}) do
       s.monitor.setTextScale(scale)
       local w,h = s.getSize()
       if w >= 40 and h >= 7 then
         best = scale
         break
       end
     end
     s.monitor.setTextScale(best)
   end
 end
 
 -- 3) Helpers
 local function forAll(fn) for _,s in ipairs(screens) do fn(s) end end
 
 -- Clear every screen to lightGray
 local function clearAll()
   forAll(function(s)
     s.setTextColor(colors.black)
     s.setBackgroundColor(colors.lightGray)
     s.clear()
   end)
 end
 
 -- 4) Static texts
 local titleText     = "Horizontal Mining System"
 local subtitleText  = "Emit Scanning Laser to Mine Target"
-local offsetText    = "Horizontal Miner ( L ): "
+local offsetText    = "Guided Mining System ( I ): "
 local promptH       = "Press H for Main Menu"
-local promptI       = "Press C to Configure Miner"
+local promptI       = "Press J to Switch to Laser Guided Jump"
-local promptO       = "Press L to Toggle Miner"
+local promptO       = "Press T to Toggle Miner"
 
--- Draw title, subtitle, and offset‑state line (now on line 5)
+-- track offset state
 local isOffsetOn = false
 
 -- Draw title, subtitle, and offset-state line (now on line 5)
-    -- Title (line 1): white on black
+
   forAll(function(s)
     local w,_ = s.getSize()
     -- Title (line 1): white on black
     local xT = math.floor((w - #titleText)/2) + 1
     s.setTextColor(colors.white)
     s.setBackgroundColor(colors.black)
-    -- Subtitle (line 3): black on lightGray
+
     s.write(titleText)
 
     -- Subtitle (line 3): black on lightGray
     local xS = math.floor((w - #subtitleText)/2) + 1
     s.setTextColor(colors.black)
     s.setBackgroundColor(colors.lightGray)
-    -- (line 4 is intentionally left blank)
+
     s.write(subtitleText)
-    -- Mining Laser Offset (line 5)
+
-    local fullOffset = offsetText .. "OFF"
+    -- (line 4 is intentionally left blank)
 
     -- Mining Laser Offset (line 5)
     local statusText = isOffsetOn and "ON" or "OFF"
     local fullOffset = offsetText .. statusText
     local xO = math.floor((w - #fullOffset)/2) + 1
 
     -- background bar
     s.setTextColor(colors.black)
-    s.setBackgroundColor(colors.red)
+
-    s.write("OFF")
+
     s.write(string.rep(" ", w))
 
     -- label
     s.setCursorPos(xO,5)
     s.write(offsetText)
 
     -- ON vs OFF coloring
-    -- line h-2: O prompt
+
     s.setBackgroundColor(isOffsetOn and colors.lime or colors.red)
     s.write(statusText)
   end)
 end
 
 -- Draw prompts on the bottom three rows
 local function drawPrompt()
-    -- line h-1: H prompt
+
     local w,h = s.getSize()
     -- line h-2: O prompt
     s.setTextColor(colors.white)
     s.setBackgroundColor(colors.blue)
     s.setCursorPos(1,h-2)
     s.write(string.rep(" ", w))
     local xO = math.floor((w - #promptO)/2) + 1
-    -- line h: I prompt
+
     s.write(promptO)
     -- line h-1: H prompt
     s.setTextColor(colors.white)
     s.setBackgroundColor(colors.blue)
     s.setCursorPos(1,h-1)
     s.write(string.rep(" ", w))
     local xH = math.floor((w - #promptH)/2) + 1
     s.setCursorPos(xH,h-1)
     s.write(promptH)
--- 5) Set up warpdriveLaserCamera peripherals
+    -- line h: I prompt
-rednet.open("top")
+
     s.setCursorPos(1,h)
     s.write(string.rep(" ", w))
     local xI = math.floor((w - #promptI)/2) + 1
     s.setCursorPos(xI,h)
     s.write(promptI)
   end)
 end
 
 -- 5) Set up all modems for rednet, then broadcast a startup check
 for _, side in ipairs(peripheral.getNames()) do
   if peripheral.getType(side) == "modem" then
     rednet.open(side)
   end
 end
--- 7) Coords line, accepts nil → blanks before first scan (on line 6)
+rednet.broadcast("check", "SMiner")
 
 -- now set up warpdriveLaserCamera peripherals
 local cams = peripheral.getNames()
 for i=#cams,1,-1 do
   if peripheral.getType(cams[i]) ~= "warpdriveLaserCamera" then
     table.remove(cams,i)
   else
     peripheral.wrap(cams[i]).beamFrequency(1420)
   end
 end
 
 -- 6) Initial draw (blank coords)
 clearAll()
 drawStatic()
 drawPrompt()
 
 -- 7) Coords line, accepts nil → blanks before first scan (on line 6)
--- draw initial blanks (on line 6)
+
   local sx = x and tostring(x) or "    "
   local sy = y and tostring(y) or "    "
--- 8) Main loop: scan + key handling
+
   local coordLine = string.format("Target: X:%s   Y:%s   Z:%s", sx, sy, sz)
   forAll(function(s)
     local w,_ = s.getSize()
-    local tx = tonumber(b)
+
-    local ty = tonumber(c)
+
-    local tz = tonumber(d)
+
-    updateCoords(tx,ty,tz)
+
-    local data = { x = tx, y = ty, z = tz }
+
-    rednet.broadcast(data, "SMineBroadcast")
+
     s.write(coordLine)
   end)
 end
 
-    elseif k == keys.c then
+-- draw initial blanks (on line 6)
-      shell.run("conf")
+
-      clearAll(); drawStatic(); updateCoords(tx,ty,tz); drawPrompt()
+
-    elseif k == keys.l then
+-- keep last coords around for redraws
-      rednet.broadcast("Toggle", "Miner")
+local lastX, lastY, lastZ = nil, nil, nil
 
 -- 8) Main loop: scan + key handling + status listener
 while true do
   -- 8a) non-blocking check for SMiner status messages
   local sender, msg, proto = rednet.receive("SMiner", 0)
   if msg == "StatON" then
     isOffsetOn = true
     clearAll(); drawStatic(); updateCoords(lastX,lastY,lastZ); drawPrompt()
   elseif msg == "StatOFF" then
     isOffsetOn = false
     clearAll(); drawStatic(); updateCoords(lastX,lastY,lastZ); drawPrompt()
   end
 
   -- 8b) main events
   local ev,k,b,c,d = os.pullEventRaw()
   if ev == "laserScanning" then
     lastX = tonumber(b)
     lastY = tonumber(c)
     lastZ = tonumber(d)
     updateCoords(lastX,lastY,lastZ)
     rednet.broadcast({ x = lastX, y = lastY, z = lastZ }, "SMineBroadcast")
 
   elseif ev == "key" then
     if k == keys.h then
       os.reboot()
 	elseif k == keys.j then
     shell.run("otc")
 clearAll(); drawStatic(); updateCoords(tx,ty,tz); drawPrompt()
     elseif k == keys.t then
       rednet.broadcast("Toggle","SMiner")
     end
   end
 end