API tools faq
paste
View difference between Paste ID: KHjKh8qW and R72xassJ
SHOW: | | - or go back to the newest paste.
1
#
2
# Makefile for generating gerbers and pngs.
3
# Tested on Advanced Circuits barebones, should work for 33 each,
4
# gerbmerge, and Advanced Circuits. Pngs used for the fab modules
5
# and the modella.
6
#
7
# Copyright (C) 2011 Andy Bardagjy.
8
#
9
# This makefile is free software; you can redistribute it and/or
10
# modify it under the terms of the GNU Lesser General Public
11
# License as published by the Free Software Foundation; either
12
# version 2.1 of the License, or (at your option) any later version.
13
#
14
# This makefile is distributed in the hope that it will be useful,
15
# but WITHOUT ANY WARRANTY; without even the implied warranty of
16
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17
# Lesser General Public License for more details.
18
#
19
# You should have received a copy of the GNU Lesser General Public
20
# License along with this library; if not, write to the Free Software
21
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
22
#
23
# Andy Bardagjy
24
# June 21, 2011
25
#
26
# Atommann
27
# Sept. 30, 2014 - use another kind of file extension scheme
28
# Oct. 13, 2014 - milling layer (GML)
29
# Apr. 16, 2015 - Export the drill file with 2:4 precision for Eagle-7.2. Device is EXCELLON_24.
30
# Apr. 28, 2016 - Support 4-layer boards. i.e. add L2(*.G1) and L3(*.G2)
31
#
32
# TODO
33
# Interesting bug, if there are no holes on the board, the script fails
34
# because no drd file is generated, so... I touch an empty drd file
35
# so the build doesn't fail. This is kinda a kluge...
36
#
37
# If there's no dimension layer, the build fails...
38
#
39
# I should add document export: sch, brd
40
#
41
42
PROJECT?= helloworld

43
44
WHITE?= \#FFFFFF

45
BLACK?= \#000000

46
DPI?= 2400

47
48
all: gerbers fab parts

49
50
# Gerber Top Layer

51
$(PROJECT).GTL: $(PROJECT).brd

52
	eagle -X -dGERBER_RS274X -o$(PROJECT).GTL $(PROJECT).brd Top Pads Vias

53
54
# Gerber Layer L2

55
$(PROJECT).G1: $(PROJECT).brd

56
	eagle -X -dGERBER_RS274X -o$(PROJECT).G1 $(PROJECT).brd Route2 Pads Vias

57
58
# Gerber Layer L3

59
$(PROJECT).G2: $(PROJECT).brd

60
	eagle -X -dGERBER_RS274X -o$(PROJECT).G2 $(PROJECT).brd Route15 Pads Vias

61
62
# Gerber Bottom Layer

63
$(PROJECT).GBL: $(PROJECT).brd

64
	eagle -X -dGERBER_RS274X -o$(PROJECT).GBL $(PROJECT).brd Bottom Pads Vias

65
66
# Gerber Top Solder Mask

67
$(PROJECT).GTS: $(PROJECT).brd

68
	eagle -X -dGERBER_RS274X -o$(PROJECT).GTS $(PROJECT).brd tStop

69
70
# Gerber Bottom Solder Mask

71
$(PROJECT).GBS: $(PROJECT).brd

72
	eagle -X -dGERBER_RS274X -o$(PROJECT).GBS $(PROJECT).brd bStop

73
74
# Gerber Top Overlay

75
$(PROJECT).GTO: $(PROJECT).brd

76
	eagle -X -dGERBER_RS274X -o$(PROJECT).GTO $(PROJECT).brd Dimension tPlace tNames _tsilk

77
78
# Gerber Bottom Overlay

79
$(PROJECT).GBO: $(PROJECT).brd

80
	eagle -X -dGERBER_RS274X -o$(PROJECT).GBO $(PROJECT).brd Dimension bPlace bNames _bsilk

81
82
# Gerber Top Paste Mask

83
$(PROJECT).GTP: $(PROJECT).brd

84
	eagle -X -dGERBER_RS274X -o$(PROJECT).GTP $(PROJECT).brd tCream

85
86
# Gerber Bottom Paste Mask

87
$(PROJECT).GBP: $(PROJECT).brd

88
	eagle -X -dGERBER_RS274X -o$(PROJECT).GBP $(PROJECT).brd bCream

89
90
# Drills Xcellon

91
$(PROJECT).TXT: $(PROJECT).brd

92
	# FIXME This is the drd hack (see top of file)

93
	rm -f $(PROJECT).TXT

94
	touch $(PROJECT).TXT

95
	eagle -X -dEXCELLON_24 -o$(PROJECT).TXT $(PROJECT).brd Drills Holes

96
97
# Gerber KeepOut/Outline

98
$(PROJECT).GKO: $(PROJECT).brd

99
	eagle -X -dGERBER_RS274X -o$(PROJECT).GKO $(PROJECT).brd Dimension

100
101
# Gerber Milling/cut-out

102
$(PROJECT).GML: $(PROJECT).brd

103
	eagle -X -dGERBER_RS274X -o$(PROJECT).GML $(PROJECT).brd Milling

104
105
# Fab reference Frame

106
$(PROJECT).ref: $(PROJECT).brd

107
	eagle -X -dGERBER_RS274X -o$(PROJECT).ref $(PROJECT).brd Reference

108
109
110
111
# Top Copper PNG

112
# So you *can* do this with eagle commands, but the holes don't work out right.

113
# Gotta use gerbv to do this

114
#$(PROJECT)_cmp.png: $(PROJECT).brd

115
#	eagle -C "ratsnest; display none Top Pads Vias; export image $(PROJECT)_cmp.png monochrome 600; quit;" $(PROJECT).brd

116
#	convert $(PROJECT)_cmp.png -negate $(PROJECT)_cmp.png

117
$(PROJECT)_cmp.png: gerbers

118
	gerbv gerbers/$(PROJECT).cmp gerbers/$(PROJECT).ref -b$(BLACK) -f$(WHITE) -f$(BLACK) -B0 -D$(DPI) -o $(PROJECT)_cmp.png -xpng

119
	convert $(PROJECT)_cmp.png -colorspace gray +dither -colors 2 -normalize $(PROJECT)_cmp.png

120
	convert $(PROJECT)_cmp.png -mattecolor black -frame 25x25 $(PROJECT)_cmp.png

121
	convert $(PROJECT)_cmp.png -strip $(PROJECT)_cmp.png

122
	convert $(PROJECT)_cmp.png -units PixelsPerInch -density $(DPI) $(PROJECT)_cmp.png

123
	#convert $(PROJECT)_cmp.png -colorspace RGB $(PROJECT)_cmp.png

124
	convert $(PROJECT)_cmp.png -type TrueColormatte PNG32:$(PROJECT)_cmp.png

125
126
# Bottom Copper PNG

127
# So you *can* do this with eagle commands, but the holes don't work out right.

128
# Gotta use gerbv to do this

129
$(PROJECT)_sol.png: gerbers

130
	gerbv gerbers/$(PROJECT).sol gerbers/$(PROJECT).ref -b$(BLACK) -f$(WHITE) -f$(BLACK) -B0 -D$(DPI) -o $(PROJECT)_sol.png -xpng

131
	convert $(PROJECT)_sol.png -colorspace gray +dither -colors 2 -normalize $(PROJECT)_sol.png

132
	convert $(PROJECT)_sol.png -mattecolor black -frame 25x25 $(PROJECT)_sol.png

133
	convert $(PROJECT)_sol.png -strip $(PROJECT)_sol.png

134
	convert $(PROJECT)_sol.png -units PixelsPerInch -density $(DPI) $(PROJECT)_sol.png

135
	#convert $(PROJECT)_sol.png -colorspace RGB $(PROJECT)_sol.png

136
	convert $(PROJECT)_sol.png -type TrueColormatte PNG32:$(PROJECT)_sol.png

137
138
# BOARD PNG

139
$(PROJECT)_bor.png: gerbers

140
	gerbv gerbers/$(PROJECT).bor gerbers/$(PROJECT).ref -b$(WHITE) -f$(BLACK) -f$(WHITE) -B0 -D$(DPI) -o $(PROJECT)_bor.png -xpng

141
	convert $(PROJECT)_bor.png -colorspace gray +dither -colors 2 -normalize $(PROJECT)_bor.png

142
	convert $(PROJECT)_bor.png -mattecolor white -frame 25x25 $(PROJECT)_bor.png

143
	convert $(PROJECT)_bor.png -strip $(PROJECT)_bor.png

144
	convert $(PROJECT)_bor.png -fill black    -floodfill +0+0 white $(PROJECT)_bor.png

145
	convert $(PROJECT)_bor.png -units PixelsPerInch -density $(DPI) $(PROJECT)_bor.png

146
	#convert $(PROJECT)_bor.png -colorspace RGB $(PROJECT)_bor.png

147
	convert $(PROJECT)_bor.png -type TrueColormatte PNG32:$(PROJECT)_bor.png

148
149
150
# Drills PNG

151
# So you *can* do this with eagle commands, but the holes don't work out right.

152
# Gotta use gerbv to do this

153
#$(PROJECT)_drd.png: $(PROJECT).brd

154
#	eagle -C "ratsnest; display none Drills Holes Dimension; export image $(PROJECT)_drd.png monochrome 600; quit;" $(PROJECT).brd

155
$(PROJECT)_drd.png: gerbers

156
	gerbv gerbers/$(PROJECT).drd gerbers/$(PROJECT).ref -b$(WHITE) -f$(BLACK) -f$(WHITE) -B0 -D$(DPI) -o $(PROJECT)_drd.png -xpng

157
	convert $(PROJECT)_drd.png -colorspace gray +dither -colors 2 -normalize $(PROJECT)_drd.png

158
	convert $(PROJECT)_drd.png -mattecolor white -frame 25x25 $(PROJECT)_drd.png

159
	convert $(PROJECT)_drd.png -strip $(PROJECT)_drd.png

160
	convert $(PROJECT)_drd.png -units PixelsPerInch -density $(DPI) $(PROJECT)_drd.png

161
	#convert $(PROJECT)_drd.png -colorspace RGB $(PROJECT)_drd.png

162
	convert $(PROJECT)_drd.png -type TrueColormatte PNG32:$(PROJECT)_drd.png

163
164
gerbers: $(PROJECT).GTL $(PROJECT).G1 $(PROJECT).G2 $(PROJECT).GBL $(PROJECT).GTS $(PROJECT).GBS $(PROJECT).GTO $(PROJECT).GBO $(PROJECT).TXT $(PROJECT).GKO $(PROJECT).ref $(PROJECT).GTP $(PROJECT).GBP $(PROJECT).GML

165
	mkdir -p gerbers

166
	mv $(PROJECT).{GKO,GTL,TXT,dri,gpi,GBL,GTS,GBS,GTO,GBO,GTP,GBP,GML,ref,G1,G2} gerbers/

167
	zip gerbers/$(PROJECT)_fab.zip gerbers/*.{GKO,TXT,GTL,GBL,GTS,GBS,GTO,GBO,GTP,GBP,GML,G1,G2}

168
	zip gerbers/$(PROJECT)_barebones.zip gerbers/*.{GKO,TXT,GTL,GBL,GML,G1,G2}

169
170
# fab: $(PROJECT)_cmp.png $(PROJECT)_drd.png $(PROJECT)_sol.png

171
fab: $(PROJECT)_cmp.png $(PROJECT)_drd.png $(PROJECT)_sol.png $(PROJECT)_bor.png

172
	mkdir -p fab

173
	# mv $(PROJECT){_cmp.png,_sol.png,_drd.png} fab/

174
	mv $(PROJECT){_cmp.png,_drd.png,_sol.png,_bor.png} fab/

175
	rm -rf gerbers

176
177
view: gerbers

178
	#gerbv gerbers/$(PROJECT).{bor,drd,stc,plc,cmp,sts,pls,sol} &

179
	gerbv gerbers/$(PROJECT).{GKO,TXT,GTL,GBL,GTS,GBS,GTO,GBO,GTP,GBP,GML,ref,G1,G2} &

180
181
parts: $(PROJECT).sch

182
	eagle -C "export partlist $(PROJECT).txt; quit;" $(PROJECT).sch

183
	eagle_parts $(PROJECT).csv $(PROJECT).txt

184
	mkdir parts

185
	mv $(PROJECT).{csv,txt} parts

186
187
clean:

188
	rm -rf $(PROJECT).{csv,txt,GKO,GTL,TXT,dri,gpi,GBL,zip,png,path,GBS,GTS,GTO,GBO,GTP,GBP,GML,G1,G2}

189
	rm -rf *#*

190
	rm -rf gerbers fab parts
        

    


            


                                


        

            



                
    

        Public Pastes
    

    
            

    

                    

        

    





    


    
    
    
    
    
    
    
    




    


    



                

            We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.             OK, I Understand
        

    
                

            

                
                    
                
            

            

                Not a member of Pastebin yet?

                Sign Up, it unlocks many cool features!