API tools faq
paste
View difference between Paste ID: FvKGMTpP and 6QHrFf97
SHOW: | | - or go back to the newest paste.
1
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.2.5-1-ARCH] (local build)
2
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
3
4
=== START OF INFORMATION SECTION ===

5
Model Family:     Western Digital Green

6
Device Model:     WDC WD30EZRX-00DC0B0

7
Serial Number:    WD-WMC1T2902918

8
LU WWN Device Id: 5 0014ee 058ded16e

9
Firmware Version: 80.00A80

10
User Capacity:    3.000.591.900.160 bytes [3,00 TB]

11
Sector Sizes:     512 bytes logical, 4096 bytes physical

12
Device is:        In smartctl database [for details use: -P show]

13
ATA Version is:   ACS-2 (minor revision not indicated)

14
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)

15
Local Time is:    Sun Nov 22 02:22:09 2015 CET

16
SMART support is: Available - device has SMART capability.

17
SMART support is: Enabled

18
19
=== START OF READ SMART DATA SECTION ===

20
SMART overall-health self-assessment test result: PASSED

21
22
General SMART Values:

23
Offline data collection status:  (0x82)	Offline data collection activity

24
					was completed without error.

25
					Auto Offline Data Collection: Enabled.

26
Self-test execution status:      (   0)	The previous self-test routine completed

27
					without error or no self-test has ever 

28
					been run.

29
Total time to complete Offline 

30
data collection: 		(40380) seconds.

31
Offline data collection

32
capabilities: 			 (0x7b) SMART execute Offline immediate.

33
					Auto Offline data collection on/off support.

34
					Suspend Offline collection upon new

35
					command.

36
					Offline surface scan supported.

37
					Self-test supported.

38
					Conveyance Self-test supported.

39
					Selective Self-test supported.

40
SMART capabilities:            (0x0003)	Saves SMART data before entering

41
					power-saving mode.

42
					Supports SMART auto save timer.

43
Error logging capability:        (0x01)	Error logging supported.

44
					General Purpose Logging supported.

45
Short self-test routine 

46
recommended polling time: 	 (   2) minutes.

47
Extended self-test routine

48
recommended polling time: 	 ( 405) minutes.

49
Conveyance self-test routine

50
recommended polling time: 	 (   5) minutes.

51
SCT capabilities: 	       (0x70b5)	SCT Status supported.

52
					SCT Feature Control supported.

53
					SCT Data Table supported.

54
55
SMART Attributes Data Structure revision number: 16

56
Vendor Specific SMART Attributes with Thresholds:

57
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE

58
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0

59
  3 Spin_Up_Time            0x0027   180   174   021    Pre-fail  Always       -       5975

60
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1875

61
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0

62
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0

63
  9 Power_On_Hours          0x0032   093   093   000    Old_age   Always       -       5275

64
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0

65
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0

66
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1875

67
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       137

68
193 Load_Cycle_Count        0x0032   192   192   000    Old_age   Always       -       24416

69
194 Temperature_Celsius     0x0022   126   108   000    Old_age   Always       -       24

70
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0

71
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0

72
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0

73
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0

74
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

75
76
SMART Error Log Version: 1

77
ATA Error Count: 256 (device log contains only the most recent five errors)

78
	CR = Command Register [HEX]

79
	FR = Features Register [HEX]

80
	SC = Sector Count Register [HEX]

81
	SN = Sector Number Register [HEX]

82
	CL = Cylinder Low Register [HEX]

83
	CH = Cylinder High Register [HEX]

84
	DH = Device/Head Register [HEX]

85
	DC = Device Command Register [HEX]

86
	ER = Error register [HEX]

87
	ST = Status register [HEX]

88
Powered_Up_Time is measured from power on, and printed as

89
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,

90
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

91
92
Error 256 occurred at disk power-on lifetime: 5254 hours (218 days + 22 hours)

93
  When the command that caused the error occurred, the device was active or idle.

94
95
  After command completion occurred, registers were:

96
  ER ST SC SN CL CH DH

97
  -- -- -- -- -- -- --

98
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

99
100
  Commands leading to the command that caused the error were:

101
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

102
  -- -- -- -- -- -- -- --  ----------------  --------------------

103
  ef 03 45 00 00 00 a0 08      00:04:54.869  SET FEATURES [Set transfer mode]

104
  ec 00 00 00 00 00 a0 08      00:04:54.842  IDENTIFY DEVICE

105
  ec 00 00 00 00 00 a0 08      00:04:54.672  IDENTIFY DEVICE

106
  ef 03 46 00 00 00 a0 08      00:04:54.666  SET FEATURES [Set transfer mode]

107
108
Error 255 occurred at disk power-on lifetime: 5254 hours (218 days + 22 hours)

109
  When the command that caused the error occurred, the device was active or idle.

110
111
  After command completion occurred, registers were:

112
  ER ST SC SN CL CH DH

113
  -- -- -- -- -- -- --

114
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

115
116
  Commands leading to the command that caused the error were:

117
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

118
  -- -- -- -- -- -- -- --  ----------------  --------------------

119
  ef 03 46 00 00 00 a0 08      00:04:54.666  SET FEATURES [Set transfer mode]

120
  ec 00 00 00 00 00 a0 08      00:04:54.646  IDENTIFY DEVICE

121
  ec 00 00 00 00 00 a0 08      00:04:54.629  IDENTIFY DEVICE

122
  ef 03 46 00 00 00 a0 08      00:04:54.622  SET FEATURES [Set transfer mode]

123
124
Error 254 occurred at disk power-on lifetime: 5254 hours (218 days + 22 hours)

125
  When the command that caused the error occurred, the device was active or idle.

126
127
  After command completion occurred, registers were:

128
  ER ST SC SN CL CH DH

129
  -- -- -- -- -- -- --

130
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

131
132
  Commands leading to the command that caused the error were:

133
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

134
  -- -- -- -- -- -- -- --  ----------------  --------------------

135
  ef 03 46 00 00 00 a0 08      00:04:54.622  SET FEATURES [Set transfer mode]

136
  ec 00 00 00 00 00 a0 08      00:04:54.602  IDENTIFY DEVICE

137
  ec 00 00 00 00 00 a0 08      00:04:54.586  IDENTIFY DEVICE

138
  ef 03 46 00 00 00 a0 08      00:04:54.579  SET FEATURES [Set transfer mode]

139
140
Error 253 occurred at disk power-on lifetime: 5254 hours (218 days + 22 hours)

141
  When the command that caused the error occurred, the device was active or idle.

142
143
  After command completion occurred, registers were:

144
  ER ST SC SN CL CH DH

145
  -- -- -- -- -- -- --

146
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

147
148
  Commands leading to the command that caused the error were:

149
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

150
  -- -- -- -- -- -- -- --  ----------------  --------------------

151
  ef 03 46 00 00 00 a0 08      00:04:54.579  SET FEATURES [Set transfer mode]

152
  ec 00 00 00 00 00 a0 08      00:04:54.559  IDENTIFY DEVICE

153
  ec 00 00 00 00 00 a0 08      00:04:54.542  IDENTIFY DEVICE

154
  ef 03 46 00 00 00 a0 08      00:04:54.536  SET FEATURES [Set transfer mode]

155
156
Error 252 occurred at disk power-on lifetime: 5254 hours (218 days + 22 hours)

157
  When the command that caused the error occurred, the device was active or idle.

158
159
  After command completion occurred, registers were:

160
  ER ST SC SN CL CH DH

161
  -- -- -- -- -- -- --

162
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

163
164
  Commands leading to the command that caused the error were:

165
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

166
  -- -- -- -- -- -- -- --  ----------------  --------------------

167
  ef 03 46 00 00 00 a0 08      00:04:54.536  SET FEATURES [Set transfer mode]

168
  ec 00 00 00 00 00 a0 08      00:04:54.516  IDENTIFY DEVICE

169
  ec 00 00 00 00 00 a0 08      00:04:54.499  IDENTIFY DEVICE

170
  ef 03 46 00 00 00 a0 08      00:04:54.493  SET FEATURES [Set transfer mode]

171
172
SMART Self-test log structure revision number 1

173
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error

174
# 1  Conveyance offline  Completed without error       00%      5271         -

175
# 2  Short offline       Completed without error       00%      5271         -

176
# 3  Conveyance offline  Completed without error       00%      5271         -

177
# 4  Short offline       Completed without error       00%      5270         -

178
# 5  Short offline       Completed without error       00%      5270         -

179
# 6  Conveyance offline  Completed without error       00%      5270         -

180
# 7  Short offline       Aborted by host               10%      5270         -

181
# 8  Short offline       Completed without error       00%      5117         -

182
# 9  Conveyance offline  Completed without error       00%      4936         -

183
#10  Short offline       Completed without error       00%      4936         -

184
#11  Extended offline    Completed without error       00%        69         -

185
186
SMART Selective self-test log data structure revision number 1

187
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

188
    1        0        0  Not_testing

189
    2        0        0  Not_testing

190
    3        0        0  Not_testing

191
    4        0        0  Not_testing

192
    5        0        0  Not_testing

193
Selective self-test flags (0x0):

194
  After scanning selected spans, do NOT read-scan remainder of disk.

195
If Selective self-test is pending on power-up, resume after 0 minute delay.
        

    


            


                                


        

            



                
    

        Public Pastes
    

    
            

    

                    

        

    





    


    
    
    
    
    
    
    
    




    


    



                

            We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.             OK, I Understand
        

    
                

            

                
                    
                
            

            

                Not a member of Pastebin yet?

                Sign Up, it unlocks many cool features!