View difference between Paste ID: EmUSm2DY and fd5Sag59

 #
 # Sample configuration file for the Samba suite for Debian GNU/Linux.
 #
 #
 # This is the main Samba configuration file. You should read the
 # smb.conf(5) manual page in order to understand the options listed
 # here. Samba has a huge number of configurable options most of which
 # are not shown in this example
 #
 # Some options that are often worth tuning have been included as
 # commented-out examples in this file.
 #  - When such options are commented with ";", the proposed setting
 #    differs from the default Samba behaviour
 #  - When commented with "#", the proposed setting is the default
 #    behaviour of Samba but the option is considered important
 #    enough to be mentioned here
 #
 # NOTE: Whenever you modify this file you should run the command
 # "testparm" to check that you have not made any basic syntactic
 # errors.
 # A well-established practice is to name the original file
 # "smb.conf.master" and create the "real" config file with
 # testparm -s smb.conf.master >smb.conf
 # This minimizes the size of the really used smb.conf file
 # which, according to the Samba Team, impacts performance
 # However, use this with caution if your smb.conf file contains nested
 # "include" statements. See Debian bug #483187 for a case
 # where using a master file is not a good idea.
 #
 
 #======================= Global Settings =======================
 
 [global]
 
 ## Browsing/Identification ###
 
 # Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = WORKGROUP
 
 # server string is the equivalent of the NT Description field
    server string = %h server (Samba, Ubuntu)
 
 # Windows Internet Name Serving Support Section:
 # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
-#   wins support = no
+   wins support = yes
 
 # WINS Server - Tells the NMBD components of Samba to be a WINS Client
 # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
 ;   wins server = w.x.y.z
 
 # This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no
 
 # What naming service and in what order should we use to resolve host names
 # to IP addresses
-;   name resolve order = lmhosts host wins bcast
+   name resolve order = lmhosts host wins bcast
 
 #### Networking ####
 
 # The specific set of interfaces / networks to bind to
 # This can be either the interface name or an IP address/netmask;
 # interface names are normally preferred
 ;   interfaces = 127.0.0.0/8 eth0
 
 # Only bind to the named interfaces and/or networks; you must use the
 # 'interfaces' option above to use this.
 # It is recommended that you enable this feature if your Samba machine is
 # not protected by a firewall or is a firewall itself.  However, this
 # option cannot handle dynamic or non-broadcast interfaces correctly.
 ;   bind interfaces only = yes
 
 
 
 #### Debugging/Accounting ####
 
 # This tells Samba to use a separate log file for each machine
 # that connects
    log file = /var/log/samba/log.%m
 
 # Cap the size of the individual log files (in KiB).
    max log size = 1000
 
 # If you want Samba to only log through syslog then set the following
 # parameter to 'yes'.
 #   syslog only = no
 
 # We want Samba to log a minimum amount of information to syslog. Everything
 # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
 # through syslog you should set the following parameter to something higher.
    syslog = 0
 
 # Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d
 
 
 ####### Authentication #######
 
 # "security = user" is always a good idea. This will require a Unix account
 # in this server for every user accessing the server. See
 # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
 # in the samba-doc package for details.
-#   security = user
+   security = user
 
 # You may wish to use password encryption.  See the section on
 # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
    encrypt passwords = true
 
 # If you are using encrypted passwords, Samba will need to know what
 # password database type you are using.
    passdb backend = tdbsam
 
    obey pam restrictions = yes
 
 # This boolean parameter controls whether Samba attempts to sync the Unix
 # password with the SMB password when the encrypted SMB password in the
 # passdb is changed.
    unix password sync = yes
 
 # For Unix password sync to work on a Debian GNU/Linux system, the following
 # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
 # sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
 
 # This boolean controls whether PAM will be used for password changes
 # when requested by an SMB client instead of the program listed in
 # 'passwd program'. The default is 'no'.
    pam password change = yes
 
 # This option controls how unsuccessful authentication attempts are mapped
 # to anonymous connections
    map to guest = bad user
 
 ########## Domains ###########
 
 # Is this machine able to authenticate users. Both PDC and BDC
 # must have this setting enabled. If you are the BDC you must
 # change the 'domain master' setting to no
 #
 ;   domain logons = yes
 #
 # The following setting only takes effect if 'domain logons' is set
 # It specifies the location of the user's profile directory
 # from the client point of view)
 # The following required a [profiles] share to be setup on the
 # samba server (see below)
 ;   logon path = \\%N\profiles\%U
 # Another common choice is storing the profile in the user's home directory
 # (this is Samba's default)
 #   logon path = \\%N\%U\profile
 
 # The following setting only takes effect if 'domain logons' is set
 # It specifies the location of a user's home directory (from the client
 # point of view)
 ;   logon drive = H:
 #   logon home = \\%N\%U
 
 # The following setting only takes effect if 'domain logons' is set
 # It specifies the script to run during logon. The script must be stored
 # in the [netlogon] share
 # NOTE: Must be store in 'DOS' file format convention
 ;   logon script = logon.cmd
 
 # This allows Unix users to be created on the domain controller via the SAMR
 # RPC pipe.  The example command creates a user account with a disabled Unix
 # password; please adapt to your needs
 ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
 
 # This allows machine accounts to be created on the domain controller via the
 # SAMR RPC pipe.
 # The following assumes a "machines" group exists on the system
 ; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
 
 # This allows Unix groups to be created on the domain controller via the SAMR
 # RPC pipe.
 ; add group script = /usr/sbin/addgroup --force-badname %g
 
 ########## Printing ##########
 
 # If you want to automatically load your printer list rather
 # than setting them up individually then you'll need this
 #   load printers = yes
 
 # lpr(ng) printing. You may wish to override the location of the
 # printcap file
 ;   printing = bsd
 ;   printcap name = /etc/printcap
 
 # CUPS printing.  See also the cupsaddsmb(8) manpage in the
 # cupsys-client package.
 ;   printing = cups
 ;   printcap name = cups
 
 ############ Misc ############
 
 # Using the following line enables you to customise your configuration
 # on a per machine basis. The %m gets replaced with the netbios name
 # of the machine that is connecting
 ;   include = /home/samba/etc/smb.conf.%m
 
 # Most people will find that this option gives better performance.
 # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
 # for details
 # You may want to add the following on a Linux system:
 #         SO_RCVBUF=8192 SO_SNDBUF=8192
 #   socket options = TCP_NODELAY
 
 # The following parameter is useful only if you have the linpopup package
 # installed. The samba maintainer and the linpopup maintainer are
 # working to ease installation and configuration of linpopup and samba.
 ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
 
 # Domain Master specifies Samba to be the Domain Master Browser. If this
 # machine will be configured as a BDC (a secondary logon server), you
 # must set this to 'no'; otherwise, the default behavior is recommended.
 #   domain master = auto
 
 # Some defaults for winbind (make sure you're not using the ranges
 # for something else.)
 ;   idmap uid = 10000-20000
 ;   idmap gid = 10000-20000
 ;   template shell = /bin/bash
 
 # The following was the default behaviour in sarge,
 # but samba upstream reverted the default because it might induce
 # performance issues in large organizations.
 # See Debian bug #368251 for some of the consequences of *not*
 # having this setting and smb.conf(5) for details.
 ;   winbind enum groups = yes
 ;   winbind enum users = yes
 
 # Setup usershare options to enable non-root users to share folders
 # with the net usershare command.
 
 # Maximum number of usershare. 0 (default) means that usershare is disabled.
 ;   usershare max shares = 100
 
 # Allow users who've been granted usershare privileges to create
 # public shares, not just authenticated ones
    usershare allow guests = yes
 
 #======================= Share Definitions =======================
 
 # Un-comment the following (and tweak the other settings below to suit)
 # to enable the default home directory shares. This will share each
 # user's home director as \\server\username
 ;[homes]
 ;   comment = Home Directories
 ;   browseable = no
 
 # By default, the home directories are exported read-only. Change the
 # next parameter to 'no' if you want to be able to write to them.
 ;   read only = yes
 
 # File creation mask is set to 0700 for security reasons. If you want to
 # create files with group=rw permissions, set next parameter to 0775.
 ;   create mask = 0700
 
 # Directory creation mask is set to 0700 for security reasons. If you want to
 # create dirs. with group=rw permissions, set next parameter to 0775.
 ;   directory mask = 0700
 
 # By default, \\server\username shares can be connected to by anyone
 # with access to the samba server. Un-comment the following parameter
 # to make sure that only "username" can connect to \\server\username
 # The following parameter makes sure that only "username" can connect
 #
 # This might need tweaking when using external authentication schemes
 ;   valid users = %S
 
 # Un-comment the following and create the netlogon directory for Domain Logons
 # (you need to configure Samba to act as a domain controller too.)
 ;[netlogon]
 ;   comment = Network Logon Service
 ;   path = /home/samba/netlogon
 ;   guest ok = yes
 ;   read only = yes
 
 # Un-comment the following and create the profiles directory to store
 # users profiles (see the "logon path" option above)
 # (you need to configure Samba to act as a domain controller too.)
 # The path below should be writable by all users so that their
 # profile directory may be created the first time they log on
 ;[profiles]
 ;   comment = Users profiles
 ;   path = /home/samba/profiles
 ;   guest ok = no
 ;   browseable = no
 ;   create mask = 0600
 ;   directory mask = 0700
 
 [printers]
    comment = All Printers
    browseable = no
    path = /var/spool/samba
    printable = yes
    guest ok = no
    read only = yes
    create mask = 0700
 
 # Windows clients look for this share name as a source of downloadable
 # printer drivers
 [print$]
    comment = Printer Drivers
    path = /var/lib/samba/printers
    browseable = yes
    read only = yes
    guest ok = no
 # Uncomment to allow remote administration of Windows print drivers.
 # You may need to replace 'lpadmin' with the name of the group your
 # admin users are members of.
 # Please note that you also need to set appropriate Unix permissions
 # to the drivers directory for these users to have write rights in it
 ;   write list = root, @lpadmin
 
 # A sample share for sharing your CD-ROM with others.
 ;[cdrom]
 ;   comment = Samba server's CD-ROM
 ;   read only = yes
 ;   locking = no
 ;   path = /cdrom
 ;   guest ok = yes
 
 # The next two parameters show how to auto-mount a CD-ROM when the
 #	cdrom share is accesed. For this to work /etc/fstab must contain
 #	an entry like this:
 #
 #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
 #
 # The CD-ROM gets unmounted automatically after the connection to the
 #
 # If you don't want to use auto-mounting/unmounting make sure the CD
 #	is mounted on /cdrom
 #
 ;   preexec = /bin/mount /cdrom
 ;   postexec = /bin/umount /cdrom
 [Shared]
 path = /home/kapitanluffy/Shared
 available = yes
 read only = no
 browseable = yes
 public = yes
 writable = yes