SHOW:
|
|
- or go back to the newest paste.
| 1 | diff --git a/target/linux/ramips/dts/mt7620a_zyxel_nbg6515-ac750.dts b/target/linux/ramips/dts/mt7620a_zyxel_nbg6515-ac750.dts | |
| 2 | new file mode 100644 | |
| 3 | index 0000000000..a5473cb094 | |
| 4 | --- /dev/null | |
| 5 | +++ b/target/linux/ramips/dts/mt7620a_zyxel_nbg6515-ac750.dts | |
| 6 | @@ -0,0 +1,222 @@ | |
| 7 | +#include "mt7620a.dtsi" | |
| 8 | + | |
| 9 | +#include <dt-bindings/input/input.h> | |
| 10 | +#include <dt-bindings/gpio/gpio.h> | |
| 11 | + | |
| 12 | +/* | |
| 13 | + led gpios: | |
| 14 | + | |
| 15 | + phy0 > 5 GHz | |
| 16 | + phy1 > 2.4 Ghz | |
| 17 | + | |
| 18 | + 7 -> power | |
| 19 | + 9 -> reset | |
| 20 | + 10 -> usb | |
| 21 | + 12 -> phy1 | |
| 22 | + 13 -> phy0 | |
| 23 | + 14 -> wps | |
| 24 | + | |
| 25 | + are the ethernet leds configurable? ethernet switch ports? | |
| 26 | + | |
| 27 | + ethernet switches: | |
| 28 | + | |
| 29 | + mt7620a -> switch0: | |
| 30 | + | |
| 31 | + port0: <not used> | |
| 32 | + port1: <not used> | |
| 33 | + port2: <not used> | |
| 34 | + port3: <not used> | |
| 35 | + port4: <not used> | |
| 36 | + port5: mt7350 | |
| 37 | + port6: cpu | |
| 38 | + port7: <not used> | |
| 39 | + | |
| 40 | + mt7350 -> switch1: | |
| 41 | + | |
| 42 | + port0 -> lan4 | |
| 43 | + port1 -> lan3 | |
| 44 | + port2 -> lan2 | |
| 45 | + port3 -> lan1 | |
| 46 | + port4 -> wan | |
| 47 | + port5 -> <not used> | |
| 48 | + port6 -> mt7620a | |
| 49 | + port7 -> <not used> | |
| 50 | +*/ | |
| 51 | + | |
| 52 | +/ {
| |
| 53 | + compatible = "zyxel,nbg6515-ac750", "ralink,mt7620a-soc"; | |
| 54 | + model = "Zyxel NBG6515"; | |
| 55 | + | |
| 56 | + aliases {
| |
| 57 | + led-boot = &led_power; | |
| 58 | + led-failsafe = &led_power; | |
| 59 | + led-running = &led_power; | |
| 60 | + led-upgrade = &led_power; | |
| 61 | + }; | |
| 62 | + | |
| 63 | + leds {
| |
| 64 | + compatible = "gpio-leds"; | |
| 65 | + | |
| 66 | + led_power: power {
| |
| 67 | + label = "green:power"; | |
| 68 | + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; | |
| 69 | + default-state = "on"; | |
| 70 | + }; | |
| 71 | + | |
| 72 | + usb {
| |
| 73 | + label = "green:usb"; | |
| 74 | + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; | |
| 75 | + linux,default-trigger = "usbport"; | |
| 76 | + }; | |
| 77 | + | |
| 78 | + wlan5g {
| |
| 79 | + label = "green:wlan5g"; | |
| 80 | + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; | |
| 81 | + linux,default-trigger = "phy0tpt"; | |
| 82 | + }; | |
| 83 | + | |
| 84 | + wlan2g {
| |
| 85 | + label = "green:wlan2g"; | |
| 86 | + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; | |
| 87 | + linux,default-trigger = "phy1tpt"; | |
| 88 | + }; | |
| 89 | + | |
| 90 | + wps {
| |
| 91 | + label = "green:wps"; | |
| 92 | + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; | |
| 93 | + }; | |
| 94 | + }; | |
| 95 | +}; | |
| 96 | + | |
| 97 | +&spi0 {
| |
| 98 | + status = "okay"; | |
| 99 | + | |
| 100 | + flash@0 {
| |
| 101 | + compatible = "jedec,spi-nor"; | |
| 102 | + reg = <0>; | |
| 103 | + spi-max-frequency = <10000000>; | |
| 104 | + | |
| 105 | + partitions {
| |
| 106 | + compatible = "fixed-partitions"; | |
| 107 | + #address-cells = <1>; | |
| 108 | + #size-cells = <1>; | |
| 109 | + | |
| 110 | + partition@0 {
| |
| 111 | + label = "u-boot"; | |
| 112 | + reg = <0x0 0x30000>; | |
| 113 | + read-only; | |
| 114 | + }; | |
| 115 | + | |
| 116 | + partition@30000 {
| |
| 117 | + label = "u-boot-env"; | |
| 118 | + reg = <0x30000 0x10000>; | |
| 119 | + read-only; | |
| 120 | + }; | |
| 121 | + | |
| 122 | + factory: partition@40000 {
| |
| 123 | + label = "factory"; | |
| 124 | + reg = <0x40000 0x10000>; | |
| 125 | + read-only; | |
| 126 | + }; | |
| 127 | + | |
| 128 | + partition@50000 {
| |
| 129 | + compatible = "denx,uimage"; | |
| 130 | + label = "firmware"; | |
| 131 | + reg = <0x50000 0x7b0000>; | |
| 132 | + }; | |
| 133 | + }; | |
| 134 | + }; | |
| 135 | +}; | |
| 136 | + | |
| 137 | + | |
| 138 | +&state_default {
| |
| 139 | + gpio {
| |
| 140 | + groups = "i2c", "uartf"; | |
| 141 | + function = "gpio"; | |
| 142 | + }; | |
| 143 | +}; | |
| 144 | + | |
| 145 | +ðernet {
| |
| 146 | + pinctrl-names = "default"; | |
| 147 | + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; | |
| 148 | + | |
| 149 | + mtd-mac-address = <&factory 0x48004>; | |
| 150 | + mtd-mac-address-increment = <1>; | |
| 151 | + | |
| 152 | + mediatek,portmap = "llllw"; | |
| 153 | + | |
| 154 | + port@5 {
| |
| 155 | + status = "okay"; | |
| 156 | + mediatek,fixed-link = <1000 1 1 1>; | |
| 157 | + phy-mode = "rgmii"; | |
| 158 | + }; | |
| 159 | + | |
| 160 | + mdio-bus {
| |
| 161 | + status = "okay"; | |
| 162 | + | |
| 163 | + phy0: ethernet-phy@0 {
| |
| 164 | + reg = <0>; | |
| 165 | + phy-mode = "rgmii"; | |
| 166 | + }; | |
| 167 | + | |
| 168 | + phy1: ethernet-phy@1 {
| |
| 169 | + reg = <1>; | |
| 170 | + phy-mode = "rgmii"; | |
| 171 | + }; | |
| 172 | + | |
| 173 | + phy2: ethernet-phy@2 {
| |
| 174 | + reg = <2>; | |
| 175 | + phy-mode = "rgmii"; | |
| 176 | + }; | |
| 177 | + | |
| 178 | + phy3: ethernet-phy@3 {
| |
| 179 | + reg = <3>; | |
| 180 | + phy-mode = "rgmii"; | |
| 181 | + }; | |
| 182 | + | |
| 183 | + phy4: ethernet-phy@4 {
| |
| 184 | + reg = <4>; | |
| 185 | + phy-mode = "rgmii"; | |
| 186 | + }; | |
| 187 | + | |
| 188 | + phy1f: ethernet-phy@1f {
| |
| 189 | + reg = <0x1f>; | |
| 190 | + phy-mode = "rgmii"; | |
| 191 | + }; | |
| 192 | + }; | |
| 193 | +}; | |
| 194 | + | |
| 195 | +&gsw {
| |
| 196 | + mediatek,port4 = "gmac"; | |
| 197 | +}; | |
| 198 | + | |
| 199 | +&pcie {
| |
| 200 | + status = "okay"; | |
| 201 | +}; | |
| 202 | + | |
| 203 | +&ehci {
| |
| 204 | + status = "okay"; | |
| 205 | +}; | |
| 206 | + | |
| 207 | +&ohci {
| |
| 208 | + status = "okay"; | |
| 209 | +}; | |
| 210 | + | |
| 211 | +&pcie0 {
| |
| 212 | + wifi@0,0 {
| |
| 213 | + reg = <0x0000 0 0 0 0>; | |
| 214 | + mediatek,mtd-eeprom = <&factory 0x8000>; | |
| 215 | + ieee80211-freq-limit = <5000000 6000000>; | |
| 216 | + }; | |
| 217 | +}; | |
| 218 | + | |
| 219 | +&gpio1 {
| |
| 220 | + status = "okay"; | |
| 221 | +}; | |
| 222 | + | |
| 223 | +&gpio2 {
| |
| 224 | + status = "okay"; | |
| 225 | +}; | |
| 226 | + | |
| 227 | +&gpio3 {
| |
| 228 | + status = "okay"; | |
| 229 | diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk | |
| 230 | index fe41512f36..7deb47f322 100644 | |
| 231 | --- a/target/linux/ramips/image/mt7620.mk | |
| 232 | +++ b/target/linux/ramips/image/mt7620.mk | |
| 233 | @@ -895,6 +895,16 @@ define Device/planex_mzk-ex750np | |
| 234 | endef | |
| 235 | TARGET_DEVICES += planex_mzk-ex750np | |
| 236 | ||
| 237 | +define Device/zyxel_nbg6515-ac750 | |
| 238 | + SOC := mt7620a | |
| 239 | + IMAGE_SIZE := 7872k | |
| 240 | + DEVICE_VENDOR := Zyxel | |
| 241 | + DEVICE_MODEL := NBG6515 | |
| 242 | + DEVICE_PACKAGES := kmod-mt76x0e | |
| 243 | + SUPPORTED_DEVICES += nbg6515 | |
| 244 | +endef | |
| 245 | +TARGET_DEVICES += zyxel_nbg6515-ac750 | |
| 246 | + | |
| 247 | define Device/ralink_mt7620a-evb | |
| 248 | SOC := mt7620a | |
| 249 | IMAGE_SIZE := 7872k | |
| 250 |