SHOW:
|
|
- or go back to the newest paste.
| 1 | # Generated by stepconf at Fri Jul 26 14:16:35 2013 | |
| 2 | # If you make changes to this file, they will be | |
| 3 | # overwritten when you run stepconf again | |
| 4 | ||
| 5 | [EMC] | |
| 6 | MACHINE = TAIG_3-axis_mill | |
| 7 | DEBUG = 0 | |
| 8 | ||
| 9 | [DISPLAY] | |
| 10 | DISPLAY = axis | |
| 11 | EDITOR = gedit | |
| 12 | POSITION_OFFSET = RELATIVE | |
| 13 | POSITION_FEEDBACK = ACTUAL | |
| 14 | MAX_FEED_OVERRIDE = 1.2 | |
| 15 | INTRO_GRAPHIC = linuxcnc.gif | |
| 16 | INTRO_TIME = 5 | |
| 17 | PROGRAM_PREFIX = /home/alex/linuxcnc/nc_files | |
| 18 | INCREMENTS = 5mm 1mm .5mm .1mm .05mm .01mm .005mm | |
| 19 | ||
| 20 | [FILTER] | |
| 21 | PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image | |
| 22 | PROGRAM_EXTENSION = .py Python Script | |
| 23 | png = image-to-gcode | |
| 24 | gif = image-to-gcode | |
| 25 | jpg = image-to-gcode | |
| 26 | py = python | |
| 27 | ||
| 28 | [TASK] | |
| 29 | TASK = milltask | |
| 30 | CYCLE_TIME = 0.010 | |
| 31 | ||
| 32 | [RS274NGC] | |
| 33 | PARAMETER_FILE = linuxcnc.var | |
| 34 | ||
| 35 | [EMCMOT] | |
| 36 | EMCMOT = motmod | |
| 37 | COMM_TIMEOUT = 1.0 | |
| 38 | COMM_WAIT = 0.010 | |
| 39 | BASE_PERIOD = 100000 | |
| 40 | SERVO_PERIOD = 1000000 | |
| 41 | ||
| 42 | [HAL] | |
| 43 | HALFILE = TAIG_3-axis_mill.hal | |
| 44 | HALFILE = custom.hal | |
| 45 | POSTGUI_HALFILE = custom_postgui.hal | |
| 46 | ||
| 47 | [TRAJ] | |
| 48 | AXES = 3 | |
| 49 | COORDINATES = X Y Z | |
| 50 | LINEAR_UNITS = mm | |
| 51 | ANGULAR_UNITS = degree | |
| 52 | CYCLE_TIME = 0.010 | |
| 53 | DEFAULT_VELOCITY = 0.60 | |
| 54 | MAX_LINEAR_VELOCITY = 6.00 | |
| 55 | ||
| 56 | [EMCIO] | |
| 57 | EMCIO = io | |
| 58 | CYCLE_TIME = 0.100 | |
| 59 | TOOL_TABLE = tool.tbl | |
| 60 | ||
| 61 | [AXIS_0] | |
| 62 | TYPE = LINEAR | |
| 63 | HOME = 0.0 | |
| 64 | MAX_VELOCITY = 6.0 | |
| 65 | MAX_ACCELERATION = 30.0 | |
| 66 | STEPGEN_MAXACCEL = 37.5 | |
| 67 | SCALE = 314.960629921 | |
| 68 | FERROR = 1 | |
| 69 | MIN_FERROR = .25 | |
| 70 | MIN_LIMIT = -100.0 | |
| 71 | MAX_LIMIT = 100.0 | |
| 72 | HOME_OFFSET = 0.0 | |
| 73 | ||
| 74 | [AXIS_1] | |
| 75 | TYPE = LINEAR | |
| 76 | HOME = 0.0 | |
| 77 | MAX_VELOCITY = 6.0 | |
| 78 | MAX_ACCELERATION = 30.0 | |
| 79 | STEPGEN_MAXACCEL = 37.5 | |
| 80 | SCALE = 148.148148148 | |
| 81 | FERROR = 1 | |
| 82 | MIN_FERROR = .25 | |
| 83 | MIN_LIMIT = -20.0 | |
| 84 | MAX_LIMIT = 20.0 | |
| 85 | HOME_OFFSET = 0.0 | |
| 86 | ||
| 87 | [AXIS_2] | |
| 88 | TYPE = LINEAR | |
| 89 | HOME = 0.0 | |
| 90 | MAX_VELOCITY = 6.0 | |
| 91 | MAX_ACCELERATION = 30.0 | |
| 92 | STEPGEN_MAXACCEL = 37.5 | |
| 93 | SCALE = 148.148148148 | |
| 94 | FERROR = 1 | |
| 95 | MIN_FERROR = .25 | |
| 96 | MIN_LIMIT = -4.0 | |
| 97 | MAX_LIMIT = 0.001 | |
| 98 | HOME_OFFSET = 0.0 |
