View difference between Paste ID: 4Jtd2R5h and s9pne5Vc

 #***************************************************************************
 #*                                                                         *
 #*   Copyright (c) 2013 Daniel Falck  <[email protected]>                  *
 #*                                                                         *
 #*   This program is free software; you can redistribute it and/or modify  *
 #*   it under the terms of the GNU Lesser General Public License (LGPL)    *
 #*   as published by the Free Software Foundation; either version 2 of     *
 #*   the License, or (at your option) any later version.                   *
 #*   for detail see the LICENCE text file.                                 *
 #*                                                                         *
 #*   This program is distributed in the hope that it will be useful,       *
 #*   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 #*   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 #*   GNU Library General Public License for more details.                  *
 #*                                                                         *
 #*   You should have received a copy of the GNU Library General Public     *
 #*   License along with this program; if not, write to the Free Software   *
 #*   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
 #*   USA                                                                   *
 #*                                                                         *
 #***************************************************************************
 '''
 This macro makes a list of holes for drilling  from a solid
 1. Select a solid object that has holes in it and run the macro
 2. It only collects info on holes that are parallel to the Z axis- I don't have a 4 or 5 axis mill at the moment
 3. It pulls the center of the hole bounding box and the XLength for it's diameter
 4. It will place a list of the holes on the clipboard
 5. Uncomment the line that starts with '#Draft.makeLine' and manipulate it, if you want to see lines down the center of each hole.
-html2 = """
+6. Manipulate the line that starts with  'holelist.append' to make the list fit your own needs- I've put the ZMax at the ZMax of the solid's bounding box
 because I want to make sure that my drill tip doesn't collide with anything on the top of the part. YMMV.
 '''
 
 from PyQt4 import QtCore, QtGui, QtWebKit
 import Part
 import FreeCADGui, FreeCAD
 from math import pi
 
 html = """
 <HTML>
 <HEAD>
 <TITLE>Test Input</TITLE>
 <SCRIPT LANGUAGE="JavaScript">
 function testResults (form) {
     var depthVar = form.depth.value;
     var standoffVar = form.standoff.value;
     var dwellVar = form.dwell.value;
     pyObj.newBox(depthVar,standoffVar,dwellVar);
 }</SCRIPT>
 </HEAD>
-<INPUT TYPE="button" NAME="button" Value="Get Holes2" onClick="testResults(this.form)">
+
 <FORM NAME="myform" ACTION="" METHOD="GET">
   <table> <TR>
       <TH align=right>Drill Depth:
       <TD><INPUT TYPE="text" NAME="depth" VALUE=""><TR>
       <TH align=right>Safety Height:
       <TD><INPUT TYPE="text" NAME="standoff" VALUE=""><TR>
       <TH align=right>Dwell Time:
       <TD><INPUT TYPE="text" NAME="dwell" VALUE=""><TR> </table>
 <INPUT TYPE="button" NAME="button" Value="Get Holes" onClick="testResults(this.form)">
 </FORM> </BODY> </HTML>
 """
 
 depth=1
-    holelist = []
+
 dwell=1
-        if  f.ParameterRange[1]> 6.28318 and f.ParameterRange[1]< 6.283186 : #eliminate flat faces
+
 def findholes():
     sel=Gui.Selection.getSelection()
     obj = sel[0].Shape
-        curvelist=[]
+
     facelist = []
     holelist =[]
-                if ( isinstance(c.Curve,Part.Circle) ):
+    vz = Base.Vector(0,0,1)
-                        curvelist.append((c.Curve.Radius,c.Curve.Center.x,c.Curve.Center.y))
+
-            coords = list(set(curvelist[:]))
+        if ( round(f.ParameterRange[0], 8)==0.0 ) and ( round(f.ParameterRange[1],8) == round(pi*2, 8)  ) : #eliminate flat faces
-        holelist.append(list((coords[0][0], (coords[0][1],coords[0][2]),h.BoundBox.ZMax,h.BoundBox.ZMin)))
+
-    return holelist
+
-    #FreeCAD.Console.PrintMessage(str(holelist))
+
-#    clipboard = QtGui.QApplication.clipboard()
+
-#    clipboard.setText(str(holelist))
+
                 if ( isinstance(c.Curve,Part.Line)):
                     v0=Base.Vector(c.Vertexes[0].X, c.Vertexes[0].Y, c.Vertexes[0].Z); v1=Base.Vector(c.Vertexes[1].X,c.Vertexes[1].Y, c.Vertexes[1].Z)
                     if (v1.sub(v0).x == 0) and (v1.sub(v0).y == 0):
                         lsp = Base.Vector(h.BoundBox.Center.x,h.BoundBox.Center.y,h.BoundBox.ZMax)
                         lep = Base.Vector(h.BoundBox.Center.x,h.BoundBox.Center.y,h.BoundBox.ZMin)
                         if obj.isInside(lsp, 0,False) or obj.isInside(lep, 0,False):
                             pass
                         else:
                             Draft.makeLine((h.BoundBox.Center.x,h.BoundBox.Center.y,obj.BoundBox.ZMax ),(h.BoundBox.Center.x,h.BoundBox.Center.y,h.BoundBox.ZMin  ))
                             x =h.BoundBox.Center.x;y=h.BoundBox.Center.y;zmax=obj.BoundBox.ZMax;zmin=h.BoundBox.ZMin;diameter=h.BoundBox.XLength
                             holelist.append((diameter, x,y,zmax,zmin))
     clipboard = QtGui.QApplication.clipboard()
     clipboard.setText(str(holelist))
 
 class TestClass(QtCore.QObject):
     @QtCore.pyqtSlot(str,str,str)
     def newBox(self, msg1,msg2,msg3):
         depth = (msg1);standoff = (msg2); dwell= (msg3)
 
         holes = findholes()
         peck_depth=0.0625
         retract_mode=0
         spindle_mode=0
         FreeCAD.Console.PrintMessage("depth ="+ str(depth)+"\n")
         FreeCAD.Console.PrintMessage("standoff = "+ str(standoff)+ "\n")
         FreeCAD.Console.PrintMessage("dwell= "+ str(dwell) + "\n")
         FreeCAD.Console.PrintMessage("peck_depth = "+ str(peck_depth) + "\n")
-a = QtGui.qApp
+
-FreeCAD.Console.PrintMessage(str(a))
+
-mw = a.activeWindow()
+
         for h in holes:
             st = ("drill("+str(h[1][0])+ "," +str(h[1][1])+ ",depth,standoff,dwell,peck_depth,retract_mode,spindle_mode)" )
             FreeCAD.Console.PrintMessage(st+"\n")
 
 myObj = TestClass()
 
 WebGui.openBrowser('DrillOps')
 
 mw =  FreeCADGui.getMainWindow()
 FreeCAD.Console.PrintMessage(str(mw))
 v= mw.findChild(QtWebKit.QWebFrame)
 
 curr1 = v.page()
 frame1 = curr1.currentFrame()
 frame1.setContent(html)
 frame1.addToJavaScriptWindowObject("pyObj", myObj)