View difference between Paste ID: 2D3m1yVB and rdvGeKHJ

-os.loadAPI "monAPI"
+local turbine
-local turbine1
+local reactor
-local reactor1
+turbine = peripheral.wrap("left")
-local mon = monAPI.wrapMonitor("right")
+reactor = peripheral.wrap("BigReactors-Reactor_0")
 
-mon.setTextColor(colors.white)
+function wipeScreen()
-mon.setBackgroundColor(colors.black)
+   term.clear()
-mon.clear()
+   term.setCursorPos(1, 1)
-mon.setCursorPos(1,1)
+end
-mon.setTextScale(0.5)
+
 while true do
-local section1 = mon.createSection(1,1,20,19)
+  sleep(0)
-section1.clear()
+  --Turbine Info
-local section2 = mon.createSection(21,1,51,19)
+  turbine1capacitor = turbine.getEnergyStored()
-section2.clear()
+  turbine1rpm = turbine.getRotorSpeed()
-local section3 = mon.createSection(52,1,82,19)
+  turbine1RFT = turbine.getEnergyProducedLastTick()
-section3.clear()
+  turbine1Flow = turbine.getFluidFlowRate()
   --Reactor Info
   reactor1Temp = reactor.getFuelTemperature()
   reactor1Steam = reactor.getEnergyProducedLastTick()
-  rednet.open("back")
+  reactor1Fuel = reactor.getFuelConsumedLastTick()
-  id,message = rednet.receive()
+  --make table of info
   t = {}
-  if  id == 158 then
+  t["bank"] = 3
-   section2.clear()
+  t["turbine1capacitor"] = turbine.getEnergyStored()
-   section2.drawBorder('#','#','+')
+  t["turbine1rpm"] = turbine.getRotorSpeed()
-   section2.setCursorPos(2,3)
+  t["turbine1RFT"] = turbine.getEnergyProducedLastTick()
-   section2.write('Turbine - Reactor Bank 1')
+  t["turbine1Flow"] = turbine.getFluidFlowRate()
-   section2.setCursorPos(2,4)
+  t["reactor1Temp"] = reactor.getFuelTemperature()
-   section2.write('Data Broadcast Received')
+  t["reactor1Steam"] = reactor.getEnergyProducedLastTick()
-   section2.setCursorPos(2,5)
+  t["reactor1Fuel"] = reactor.getFuelConsumedLastTick()
-   section2.write('System Status')
+  sleep(1)
-   section2.setCursorPos(2,6)
+  rednet.open("bottom")
-   section2.write('Turbine:')
+  rednet.send(160, t)
-   section2.setCursorPos(2,7)
+
-    if message["turbine1rpm"] >= 1725 then
+  wipeScreen()
-      section2.setTextColor(colors.green)
+  print('Reactor - Turbine Monitor')
-     elseif message["turbine1rpm"] >= 800 then
+  term.setCursorPos(1,2)
-      section2.setTextColor(colors.orange)
+  print('Data Broadcast Live')
-     else
+  term.setCursorPos(1,3)
-      section2.setTextColor(colors.red)
+  print('System Status')
-    end
+  term.setCursorPos(1,4)
-   section2.write('RPM: '..message["turbine1rpm"]..'')
+  print('Turbine:')
-   section2.setCursorPos(2,8)
+  term.setCursorPos(1,5)
-   section2.write('Flow Rate: '..message["turbine1Flow"]..'mb/t')
+  print('RPM: '..turbine.getRotorSpeed()..'')
-   section2.setCursorPos(2,9)
+  term.setCursorPos(1,6)
-   section2.write('Generation: '..message["turbine1RFT"]..' rf/t')
+  print('Flow Rate: '..turbine.getFluidFlowRate()..'mb/t')
-   section2.setCursorPos(2,10)
+  term.setCursorPos(1,7)
-   section2.write('Capacitor: '..message["turbine1capacitor"]..'')
+  print('Generation: '..turbine.getEnergyProducedLastTick()..' rf/t')
-   section2.setCursorPos(2,11)
+  term.setCursorPos(1,8)
-   section2.write('Reactor:')
+  print('Capacitor: '..turbine.getEnergyStored()..'')
-   section2.setCursorPos(2,12)
+  term.setCursorPos(1,10)
-   section2.write('Temp: '..message["reactor1Temp"]..'')
+  print('Reactor:')
-   section2.setCursorPos(2,13)
+  term.setCursorPos(1,11)
-   section2.write('Steam Pressure: '..message["reactor1Steam"]..'')
+  print('Temp: '..reactor.getFuelTemperature()..'')
-   section2.setCursorPos(2,14)
+  term.setCursorPos(1,12)
-   section2.write('Fuel Consumption: '..message["reactor1Fuel"]..'')
+  print('Steam Pressure: '..reactor.getEnergyProducedLastTick()..'')
-
+  term.setCursorPos(1,13)
- elseif id  == 159 then
+  print('Fuel Consumption: '..reactor.getFuelConsumedLastTick()..'')
-   section3.clear()
+  end