SHOW:
|
|
- or go back to the newest paste.
| 1 | Please follow the instruction in order to access the Web GUI (For VMware Workstation) | |
| 2 | ||
| 3 | 1- Install VMware Workstation (In case you don't have it on your machine. Unfortunately I could not get the VM to work with VBox so I needed to install it on my machine) | |
| 4 | ||
| 5 | 2- Double Click and Open the PA-VM-ESX-6.1.0 (Kindly provided by "b00stedguy"). | |
| 6 | ||
| 7 | 3- When asked for conversion to VMDK, Go ahead and start the conversion (Remember to change the path, if you storeall your VMs centrally) | |
| 8 | ||
| 9 | 4- Once the conversion finished, you should see PA-VM-ESX-6.1.0 in the list of the VMs on the left side. Click on "Edit" (Between the "File and "View") --> and select "Virtual Network Editor", you can add a new network or edit an existing one. I edited VMnet1. Set to Host-Only mode and set a desired network address (In my case 192.168.0.0/24) | |
| 10 | ||
| 11 | 5- No other changes are required | |
| 12 | ||
| 13 | 6- Start the PAN-OS VM and patiently wait for 45 seconds to a minute, then login with the default username and password of admin / admin as other guys have already indicated (And yes, Mega is awesome, and the UN / PW work) | |
| 14 | ||
| 15 | 7- Once you got to the prompt (admin@PA-VM), type | |
| 16 | ||
| 17 | "configure" | |
| 18 | ||
| 19 | 8- You are now in the config mode, type the following command in order to give an IP address for the | |
| 20 | PAN management and Web Access, | |
| 21 | ||
| 22 | set deviceconfig system ip-address 192.168.0.30 netmask 255.255.255.0 default-gateway 192.168.0.1 dns-setting servers primary 8.8.8.8 | |
| 23 | ||
| 24 | 9- Hit Enter and then Type "commit" | |
| 25 | ||
| 26 | * Remember that we can use "?" to see all the commands and use "TAB" to complete the commands | |
| 27 | ||
| 28 | 10- Install a VM client (WinXP or 7 or Ubuntu) and Power it on. Set the network card to be in the same network as the PAN-OS (Host only mode) and give it a desired IP address (In the range of the PAN-OS). | |
| 29 | ||
| 30 | 11- Try to ping the IP address of the PAN-OS and If successful, then open a browser and type "https://192.168.0.30" | |
| 31 | ||
| 32 | 12- Use the admin / admin for username and password. | |
| 33 | ||
| 34 | 13- Good luck and enjoy one of the best security products to date. (No Debate Please) |
