Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 65.705]
- X.Org X Server 1.18.4
- Release Date: 2016-07-19
- [ 65.705] X Protocol Version 11, Revision 0
- [ 65.705] Build Operating System: FreeBSD 12.0-RELEASE-p6 amd64
- [ 65.705] Current Operating System: FreeBSD luv 12.0-RELEASE-p7 FreeBSD 12.0-RELEASE-p7 GENERIC amd64
- [ 65.705] Build Date: 20 June 2019 09:02:16AM
- [ 65.705]
- [ 65.705] Current version of pixman: 0.34.0
- [ 65.705] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 65.705] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 65.706] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 19 20:40:48 2019
- [ 65.707] (==) Using config file: "/etc/X11/xorg.conf"
- [ 65.707] (==) No Layout section. Using the first Screen section.
- [ 65.707] (==) No screen section available. Using defaults.
- [ 65.707] (**) |-->Screen "Default Screen Section" (0)
- [ 65.707] (**) | |-->Monitor "<default monitor>"
- [ 65.708] (==) No monitor specified for screen "Default Screen Section".
- Using a default monitor configuration.
- [ 65.708] (==) Automatically adding devices
- [ 65.708] (==) Automatically enabling devices
- [ 65.708] (==) Not automatically adding GPU devices
- [ 65.708] (==) Max clients allowed: 256, resource mask: 0x1fffff
- [ 65.708] (WW) The directory "/usr/local/share/fonts/misc/" does not exist.
- [ 65.708] Entry deleted from font path.
- [ 65.709] (WW) The directory "/usr/local/share/fonts/Type1/" does not exist.
- [ 65.709] Entry deleted from font path.
- [ 65.709] (WW) The directory "/usr/local/share/fonts/100dpi/" does not exist.
- [ 65.709] Entry deleted from font path.
- [ 65.709] (WW) The directory "/usr/local/share/fonts/75dpi/" does not exist.
- [ 65.709] Entry deleted from font path.
- [ 65.709] (==) FontPath set to:
- /usr/local/share/fonts/TTF/,
- /usr/local/share/fonts/OTF/
- [ 65.709] (==) ModulePath set to "/usr/local/lib/xorg/modules"
- [ 65.709] (II) The server relies on devd to provide the list of input devices.
- If no devices become available, reconfigure devd or disable AutoAddDevices.
- [ 65.709] (II) Loader magic: 0x411020
- [ 65.709] (II) Module ABI versions:
- [ 65.709] X.Org ANSI C Emulation: 0.4
- [ 65.709] X.Org Video Driver: 20.0
- [ 65.709] X.Org XInput driver : 22.1
- [ 65.709] X.Org Server Extension : 9.0
- [ 65.710] (--) PCI:*(0:0:2:0) 8086:1916:103c:8079 rev 7, Mem @ 0xe0000000/16777216, 0xd0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/65536
- [ 65.710] (II) LoadModule: "glx"
- [ 65.711] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
- [ 65.723] (II) Module glx: vendor="X.Org Foundation"
- [ 65.723] compiled for 1.18.4, module version = 1.0.0
- [ 65.723] ABI class: X.Org Server Extension, version 9.0
- [ 65.723] (==) AIGLX enabled
- [ 65.724] (==) Matched intel as autoconfigured driver 0
- [ 65.724] (==) Matched modesetting as autoconfigured driver 1
- [ 65.724] (==) Matched scfb as autoconfigured driver 2
- [ 65.724] (==) Matched vesa as autoconfigured driver 3
- [ 65.724] (==) Assigned the driver to the xf86ConfigLayout
- [ 65.724] (II) LoadModule: "intel"
- [ 65.724] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
- [ 65.727] (II) Module intel: vendor="X.Org Foundation"
- [ 65.727] compiled for 1.18.4, module version = 2.99.917
- [ 65.727] Module class: X.Org Video Driver
- [ 65.727] ABI class: X.Org Video Driver, version 20.0
- [ 65.727] (II) LoadModule: "modesetting"
- [ 65.727] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so
- [ 65.728] (II) Module modesetting: vendor="X.Org Foundation"
- [ 65.728] compiled for 1.18.4, module version = 1.18.4
- [ 65.728] Module class: X.Org Video Driver
- [ 65.728] ABI class: X.Org Video Driver, version 20.0
- [ 65.728] (II) LoadModule: "scfb"
- [ 65.728] (WW) Warning, couldn't open module scfb
- [ 65.728] (II) UnloadModule: "scfb"
- [ 65.728] (II) Unloading scfb
- [ 65.728] (EE) Failed to load module "scfb" (module does not exist, 0)
- [ 65.728] (II) LoadModule: "vesa"
- [ 65.728] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
- [ 65.729] (II) Module vesa: vendor="X.Org Foundation"
- [ 65.729] compiled for 1.18.4, module version = 2.4.0
- [ 65.729] Module class: X.Org Video Driver
- [ 65.729] ABI class: X.Org Video Driver, version 20.0
- [ 65.729] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
- i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
- 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
- Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
- GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
- [ 65.729] (II) intel: Driver for Intel(R) HD Graphics
- [ 65.729] (II) intel: Driver for Intel(R) Iris(TM) Graphics
- [ 65.729] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
- [ 65.729] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
- [ 65.729] (II) VESA: driver for VESA chipsets: vesa
- [ 65.729] (--) Using syscons driver with X support (version 2.0)
- [ 65.729] (++) using VT number 3
- [ 65.741] (WW) Falling back to old probe method for modesetting
- [ 65.741] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
- [ 65.741] (II) intel(0): Creating default Display subsection in Screen section
- "Default Screen Section" for depth/fbbpp 24/32
- [ 65.741] (==) intel(0): Depth 24, (--) framebuffer bpp 32
- [ 65.741] (==) intel(0): RGB weight 888
- [ 65.741] (==) intel(0): Default visual is TrueColor
- [ 65.741] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 520
- [ 65.742] (**) intel(0): Relaxed fencing enabled
- [ 65.742] (**) intel(0): Wait on SwapBuffers? enabled
- [ 65.742] (**) intel(0): Triple buffering? enabled
- [ 65.742] (**) intel(0): Framebuffer tiled
- [ 65.742] (**) intel(0): Pixmaps tiled
- [ 65.742] (**) intel(0): 3D buffers tiled
- [ 65.742] (**) intel(0): SwapBuffers wait enabled
- [ 65.742] (==) intel(0): video overlay key set to 0x101fe
- [ 65.743] (II) intel(0): Output eDP1 has no monitor section
- [ 65.744] (II) intel(0): Output DP1 has no monitor section
- [ 65.748] (II) intel(0): Output HDMI1 has no monitor section
- [ 65.748] (II) intel(0): Output DP2 has no monitor section
- [ 65.752] (II) intel(0): Output HDMI2 has no monitor section
- [ 65.754] (II) intel(0): EDID for output eDP1
- [ 65.754] (II) intel(0): Manufacturer: AUO Model: 123d Serial#: 0
- [ 65.754] (II) intel(0): Year: 2013 Week: 0
- [ 65.754] (II) intel(0): EDID Version: 1.4
- [ 65.754] (II) intel(0): Digital Display Input
- [ 65.754] (II) intel(0): 6 bits per channel
- [ 65.754] (II) intel(0): Digital interface is DisplayPort
- [ 65.754] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
- [ 65.754] (II) intel(0): Gamma: 2.20
- [ 65.754] (II) intel(0): No DPMS capabilities specified
- [ 65.754] (II) intel(0): Supported color encodings: RGB 4:4:4
- [ 65.754] (II) intel(0): First detailed timing is preferred mode
- [ 65.754] (II) intel(0): Preferred mode is native pixel format and refresh rate
- [ 65.754] (II) intel(0): redX: 0.588 redY: 0.345 greenX: 0.327 greenY: 0.542
- [ 65.754] (II) intel(0): blueX: 0.151 blueY: 0.143 whiteX: 0.313 whiteY: 0.329
- [ 65.754] (II) intel(0): Manufacturer's mask: 0
- [ 65.754] (II) intel(0): Supported detailed timing:
- [ 65.754] (II) intel(0): clock: 141.0 MHz Image Size: 309 x 173 mm
- [ 65.754] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2068 h_blank_end 2100 h_border: 0
- [ 65.754] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1084 v_blanking: 1118 v_border: 0
- [ 65.754] (II) intel(0): Supported detailed timing:
- [ 65.754] (II) intel(0): clock: 94.0 MHz Image Size: 309 x 173 mm
- [ 65.754] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2068 h_blank_end 2100 h_border: 0
- [ 65.754] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1084 v_blanking: 1118 v_border: 0
- [ 65.754] (II) intel(0): Unknown vendor-specific block 2
- [ 65.754] (II) intel(0): EDID (in hex):
- [ 65.754] (II) intel(0): 00ffffffffffff0006af3d1200000000
- [ 65.754] (II) intel(0): 00170104951f1178029fe59658538a26
- [ 65.754] (II) intel(0): 24505400000001010101010101010101
- [ 65.754] (II) intel(0): 010101010101143780b4703826403064
- [ 65.754] (II) intel(0): 310035ad10000018b82480b470382640
- [ 65.754] (II) intel(0): 3064310035ad10000018000000000000
- [ 65.754] (II) intel(0): 00000000000000000000000000000002
- [ 65.754] (II) intel(0): 001036ff0f3c961b10289620202000a0
- [ 65.754] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
- [ 65.754] (II) intel(0): Printing probed modes for output eDP1
- [ 65.754] (II) intel(0): Modeline "1920x1080"x60.1 141.00 1920 1968 2068 2100 1080 1083 1084 1118 -hsync -vsync (67.1 kHz eP)
- [ 65.754] (II) intel(0): Modeline "1920x1080"x40.0 94.00 1920 1968 2068 2100 1080 1083 1084 1118 -hsync -vsync (44.8 kHz e)
- [ 65.754] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
- [ 65.754] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
- [ 65.754] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
- [ 65.754] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
- [ 65.754] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
- [ 65.754] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
- [ 65.754] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
- [ 65.754] (II) intel(0): EDID for output DP1
- [ 65.758] (II) intel(0): EDID for output HDMI1
- [ 65.758] (II) intel(0): EDID for output DP2
- [ 65.762] (II) intel(0): EDID for output HDMI2
- [ 65.762] (II) intel(0): Output eDP1 connected
- [ 65.762] (II) intel(0): Output DP1 disconnected
- [ 65.762] (II) intel(0): Output HDMI1 disconnected
- [ 65.762] (II) intel(0): Output DP2 disconnected
- [ 65.762] (II) intel(0): Output HDMI2 disconnected
- [ 65.762] (II) intel(0): Using exact sizes for initial modes
- [ 65.762] (II) intel(0): Output eDP1 using initial mode 1920x1080 +0+0
- [ 65.762] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
- [ 65.762] (II) intel(0): Kernel page flipping support detected, enabling
- [ 65.762] (==) intel(0): DPI set to (96, 96)
- [ 65.762] (II) Loading sub module "fb"
- [ 65.762] (II) LoadModule: "fb"
- [ 65.762] (II) Loading /usr/local/lib/xorg/modules/libfb.so
- [ 65.764] (II) Module fb: vendor="X.Org Foundation"
- [ 65.764] compiled for 1.18.4, module version = 1.0.0
- [ 65.764] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 65.764] (II) Loading sub module "dri2"
- [ 65.764] (II) LoadModule: "dri2"
- [ 65.764] (II) Module "dri2" already built-in
- [ 65.764] (II) UnloadModule: "modesetting"
- [ 65.764] (II) Unloading modesetting
- [ 65.764] (II) UnloadModule: "vesa"
- [ 65.764] (II) Unloading vesa
- [ 65.764] (==) Depth 24 pixmap format is 32 bpp
- [ 65.764] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
- [ 65.766] (II) UXA(0): Driver registered support for the following operations:
- [ 65.766] (II) solid
- [ 65.766] (II) copy
- [ 65.766] (II) put_image
- [ 65.766] (II) get_image
- [ 65.766] (II) intel(0): [DRI2] Setup complete
- [ 65.766] (II) intel(0): [DRI2] DRI driver: i965
- [ 65.766] (II) intel(0): [DRI2] VDPAU driver: va_gl
- [ 65.766] (==) intel(0): Backing store enabled
- [ 65.766] (==) intel(0): Silken mouse enabled
- [ 65.766] (II) intel(0): Initializing HW Cursor
- [ 65.766] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 65.768] (==) intel(0): DPMS enabled
- [ 65.768] (==) intel(0): Intel XvMC decoder enabled
- [ 65.768] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
- [ 65.768] (II) intel(0): DRI2: Enabled
- [ 65.768] (II) intel(0): DRI3: Disabled
- [ 65.815] (--) RandR disabled
- [ 65.859] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
- [ 65.859] (II) AIGLX: enabled GLX_ARB_create_context
- [ 65.859] (II) AIGLX: enabled GLX_ARB_create_context_profile
- [ 65.859] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
- [ 65.859] (II) AIGLX: enabled GLX_INTEL_swap_event
- [ 65.859] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
- [ 65.859] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
- [ 65.859] (II) AIGLX: enabled GLX_ARB_fbconfig_float
- [ 65.859] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
- [ 65.859] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
- [ 65.859] (II) AIGLX: enabled GLX_ARB_create_context_robustness
- [ 65.859] (II) AIGLX: Loaded and initialized i965
- [ 65.859] (II) GLX: Initialized DRI2 GL provider for screen 0
- [ 65.860] (II) intel(0): Setting screen physical size to 508 x 285
- [ 65.895] (II) config/devd: probing input devices...
- [ 65.895] (II) config/devd: adding input device (null) (/dev/kbdmux)
- [ 65.895] (II) LoadModule: "kbd"
- [ 65.896] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
- [ 65.896] (II) Module kbd: vendor="X.Org Foundation"
- [ 65.896] compiled for 1.18.4, module version = 1.9.0
- [ 65.896] Module class: X.Org XInput Driver
- [ 65.896] ABI class: X.Org XInput driver, version 22.1
- [ 65.896] (II) Using input driver 'kbd' for 'kbdmux'
- [ 65.896] (**) kbdmux: always reports core events
- [ 65.896] (**) kbdmux: always reports core events
- [ 65.896] (**) Option "Protocol" "standard"
- [ 65.896] (**) Option "XkbRules" "base"
- [ 65.896] (**) Option "XkbModel" "pc105"
- [ 65.896] (**) Option "XkbLayout" "us"
- [ 65.896] (**) Option "config_info" "devd:kbdmux"
- [ 65.896] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
- [ 65.912] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
- [ 65.912] (II) config/devd: adding input device (null) (/dev/sysmouse)
- [ 65.912] (II) LoadModule: "mouse"
- [ 65.913] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
- [ 65.913] (II) Module mouse: vendor="X.Org Foundation"
- [ 65.913] compiled for 1.18.4, module version = 1.9.3
- [ 65.913] Module class: X.Org XInput Driver
- [ 65.913] ABI class: X.Org XInput driver, version 22.1
- [ 65.913] (II) Using input driver 'mouse' for 'sysmouse'
- [ 65.913] (**) sysmouse: always reports core events
- [ 65.913] (**) Option "Device" "/dev/sysmouse"
- [ 65.913] (==) sysmouse: Protocol: "Auto"
- [ 65.913] (**) sysmouse: always reports core events
- [ 65.913] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
- [ 65.913] (**) sysmouse: ZAxisMapping: buttons 4 and 5
- [ 65.913] (**) sysmouse: Buttons: 5
- [ 65.913] (**) Option "config_info" "devd:sysmouse"
- [ 65.913] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
- [ 65.914] (**) sysmouse: (accel) keeping acceleration scheme 1
- [ 65.914] (**) sysmouse: (accel) acceleration profile 0
- [ 65.914] (**) sysmouse: (accel) acceleration factor: 2.000
- [ 65.914] (**) sysmouse: (accel) acceleration threshold: 4
- [ 65.914] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
- [ 65.914] (II) sysmouse: SetupAuto: protocol is SysMouse
- [ 65.914] (II) config/devd: device /dev/psm0 already opened
- [ 308.755] (II) config/devd: terminating backend...
- [ 308.755] (II) UnloadModule: "mouse"
- [ 308.755] (II) UnloadModule: "kbd"
- [ 308.806] (WW) xf86OpenConsole: VT_ACTIVATE failed
- [ 308.807] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
- [ 308.807] (II) UXA(0): Driver registered support for the following operations:
- [ 308.807] (II) solid
- [ 308.807] (II) copy
- [ 308.807] (II) put_image
- [ 308.807] (II) get_image
- [ 308.807] (II) intel(0): [DRI2] Setup complete
- [ 308.807] (II) intel(0): [DRI2] DRI driver: i965
- [ 308.807] (II) intel(0): [DRI2] VDPAU driver: va_gl
- [ 308.807] (II) intel(0): Initializing HW Cursor
- [ 308.807] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 308.807] (==) intel(0): DPMS enabled
- [ 308.807] (==) intel(0): Intel XvMC decoder enabled
- [ 308.807] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
- [ 308.807] (II) intel(0): DRI2: Enabled
- [ 308.807] (II) intel(0): DRI3: Disabled
- [ 308.855] (--) RandR disabled
- [ 308.866] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
- [ 308.866] (II) AIGLX: enabled GLX_ARB_create_context
- [ 308.866] (II) AIGLX: enabled GLX_ARB_create_context_profile
- [ 308.866] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
- [ 308.866] (II) AIGLX: enabled GLX_INTEL_swap_event
- [ 308.866] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
- [ 308.866] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
- [ 308.866] (II) AIGLX: enabled GLX_ARB_fbconfig_float
- [ 308.866] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
- [ 308.866] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
- [ 308.866] (II) AIGLX: enabled GLX_ARB_create_context_robustness
- [ 308.866] (II) AIGLX: Loaded and initialized i965
- [ 308.866] (II) GLX: Initialized DRI2 GL provider for screen 0
- [ 308.867] (II) intel(0): Setting screen physical size to 508 x 285
- [ 308.886] (II) config/devd: probing input devices...
- [ 308.886] (II) config/devd: adding input device (null) (/dev/kbdmux)
- [ 308.886] (II) Using input driver 'kbd' for 'kbdmux'
- [ 308.886] (**) kbdmux: always reports core events
- [ 308.886] (**) kbdmux: always reports core events
- [ 308.886] (**) Option "Protocol" "standard"
- [ 308.886] (**) Option "XkbRules" "base"
- [ 308.886] (**) Option "XkbModel" "pc105"
- [ 308.886] (**) Option "XkbLayout" "us"
- [ 308.886] (**) Option "config_info" "devd:kbdmux"
- [ 308.886] (EE) KbdOn: tcsetattr: Inappropriate ioctl for device
- [ 308.886] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
- [ 308.886] (II) config/devd: adding input device (null) (/dev/sysmouse)
- [ 308.886] (II) Using input driver 'mouse' for 'sysmouse'
- [ 308.886] (**) sysmouse: always reports core events
- [ 308.886] (**) Option "Device" "/dev/sysmouse"
- [ 308.886] (==) sysmouse: Protocol: "Auto"
- [ 308.886] (**) sysmouse: always reports core events
- [ 308.886] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
- [ 308.886] (**) sysmouse: ZAxisMapping: buttons 4 and 5
- [ 308.886] (**) sysmouse: Buttons: 5
- [ 308.886] (**) Option "config_info" "devd:sysmouse"
- [ 308.886] (**) sysmouse: (accel) keeping acceleration scheme 1
- [ 308.886] (**) sysmouse: (accel) acceleration profile 0
- [ 308.886] (**) sysmouse: (accel) acceleration factor: 2.000
- [ 308.886] (**) sysmouse: (accel) acceleration threshold: 4
- [ 308.886] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
- [ 308.886] (II) sysmouse: SetupAuto: protocol is SysMouse
- [ 309.010] (II) config/devd: adding input device Mouse (/dev/psm0)
- [ 309.010] (II) Using input driver 'mouse' for 'Mouse'
- [ 309.010] (**) Mouse: always reports core events
- [ 309.010] (**) Option "Device" "/dev/psm0"
- [ 309.010] (==) Mouse: Protocol: "Auto"
- [ 309.010] (**) Mouse: always reports core events
- [ 309.132] (==) Mouse: Emulate3Buttons, Emulate3Timeout: 50
- [ 309.132] (**) Mouse: ZAxisMapping: buttons 4 and 5
- [ 309.132] (**) Mouse: Buttons: 5
- [ 309.132] (**) Option "config_info" "devd:psm0"
- [ 309.132] (**) Mouse: (accel) keeping acceleration scheme 1
- [ 309.132] (**) Mouse: (accel) acceleration profile 0
- [ 309.132] (**) Mouse: (accel) acceleration factor: 2.000
- [ 309.132] (**) Mouse: (accel) acceleration threshold: 4
- [ 309.210] (II) Mouse: SetupAuto: hw.iftype is 3, hw.model is 13
- [ 309.210] (II) Mouse: SetupAuto: protocol is PS/2
- [ 309.672] (II) Mouse: ps2EnableDataReporting: succeeded
- [ 309.975] (WW) config/devd: devd socket is lost
- [ 309.976] (EE) config/devd: fail to connect to devd
- [ 310.031] (II) config/devd: terminating backend...
- [ 310.031] (II) UnloadModule: "mouse"
- [ 310.031] (II) UnloadModule: "mouse"
- [ 310.031] (II) UnloadModule: "kbd"
- [ 310.079] (II) Server terminated successfully (0). Closing log file.
Advertisement
Add Comment
Please, Sign In to add comment