API tools faq
paste
Advertisement
drac98

FreeBSD boot output

drac98
May 12th, 2021
27
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.99 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.05.12 15:12:34 =~=~=~=~=~=~=~=~=~=~=~=
  2. \00\00\00
  3. U-Boot SPL 2018.09 (Dec 07 2018 - 01:55:41 +0000)
  4. Trying to boot from MMC1
  5. Loading Environment from FAT... *** Warning - bad CRC, using default environment
  6.  
  7. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  8.  
  9.  
  10.  
  11. U-Boot 2018.09 (Dec 07 2018 - 01:55:41 +0000)
  12.  
  13. CPU : AM335X-GP rev 2.1
  14. I2C: ready
  15. DRAM: 512 MiB
  16. No match for driver 'omap_hsmmc'
  17. No match for driver 'omap_hsmmc'
  18. Some drivers were not found
  19. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  20. Loading Environment from FAT... *** Warning - bad CRC, using default environment
  21.  
  22. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  23.  
  24. <ethaddr> not set. Validating first E-fuse MAC
  25. Net: cpsw, usb_ether
  26. Press SPACE to abort autoboot in 2 seconds
  27. switch to partitions #0, OK
  28. mmc0 is current device
  29. Scanning mmc 0:1...
  30. 51500 bytes read in 7 ms (7 MiB/s)
  31. Found EFI removable media binary efi/boot/bootarm.efi
  32. Scanning disks on usb...
  33. Disk usb0 not ready
  34. Disk usb1 not ready
  35. Disk usb2 not ready
  36. Disk usb3 not ready
  37. Scanning disks on mmc...
  38. MMC Device 2 not found
  39. MMC Device 3 not found
  40. Found 5 disks
  41. 587736 bytes read in 41 ms (13.7 MiB/s)
  42. ## Starting EFI application at 82000000 ...
  43. [?25hConsoles: EFI console
  44.  
  45.  
  46. [?25h|/-\|FreeBSD/arm EFI loader, Revision 1.1
  47.  
  48.  
  49.  
  50.  
  51.  
  52. Command line arguments: l
  53.  
  54.  
  55. EFI version: 2.70
  56.  
  57.  
  58. EFI Firmware: Das U-Boot (rev 8216.2304)
  59.  
  60.  
  61. Console: efi (0)
  62.  
  63.  
  64. Load Path: /\efi\boot\bootarm.efi
  65.  
  66.  
  67. Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0x6,0x0)/HD(1,0x01,0,0x42f,0x18fa8)
  68.  
  69.  
  70. Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0x6,0x0)/HD(1,0x01,0,0x42f,0x18fa8)
  71.  
  72.  
  73. Setting currdev to disk0p1:
  74.  
  75.  
  76. /-\|/-\|/-\|Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0x6,0x0)/HD(2,0x01,0,0x193d7,0x1cd0c29)
  77.  
  78.  
  79. Setting currdev to disk0p2:
  80.  
  81.  
  82. /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf
  83.  
  84.  
  85. Loading /boot/device.hints
  86.  
  87.  
  88. |/-\|/-\|/-\Loading /boot/loader.conf
  89.  
  90.  
  91. |/-\Loading /boot/loader.conf.local
  92.  
  93.  
  94. |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Loading kernel...
  95.  
  96.  
  97. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/boot/kernel/kernel text=0x8649ac /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|data=0xb0da0+0x1f58a0 /-\|/-syms=[0x4+0xa1060\|/-\+0x4+0x101505|/-\|/-\]
  98.  
  99.  
  100. Loading configured modules...
  101.  
  102.  
  103. |/-\|/-\|//boot/entropy -size=0x1000
  104.  
  105.  
  106. \|/-\|/-\|/-\|//boot/kernel/umodem.ko text=0x1550 text=0xf30 data=0x1080+0xf84 syms=[0x4+0xe90+0x4+0xa7e]
  107.  
  108.  
  109. loading required module 'ucom'
  110.  
  111.  
  112. -\|/-\|/-\|/-\|/-\|/-/boot/kernel/ucom.ko text=0x174c text=0x2a30 data=0x1080+0x17b8 syms=[0x4+0x13e0\+0x4+0xbac]
  113.  
  114.  
  115.  
  116.  
  117.  
  118. Hit [Enter] to boot immediately, or any other key for command prompt.
  119.  
  120.  
  121.  
  122. Booting [/boot/kernel/kernel] in 9 seconds...
  123. Booting [/boot/kernel/kernel] in 8 seconds...
  124. Booting [/boot/kernel/kernel] in 7 seconds...
  125. Booting [/boot/kernel/kernel] in 6 seconds...
  126. Booting [/boot/kernel/kernel] in 5 seconds...
  127. Booting [/boot/kernel/kernel] in 4 seconds...
  128. Booting [/boot/kernel/kernel] in 3 seconds...
  129. Booting [/boot/kernel/kernel] in 2 seconds...
  130. Booting [/boot/kernel/kernel] in 1 second...
  131. Booting [/boot/kernel/kernel]...
  132.  
  133.  
  134. Using DTB provided by EFI at 0x87ff1000.
  135.  
  136.  
  137. |/-\|/Kernel entry at 0x95000180...
  138.  
  139.  
  140. Kernel args: (null)
  141.  
  142.  
  143. modulep: 0xc0ccf000
  144.  
  145.  
  146. relocation_offset 0
  147.  
  148.  
  149. ---<<BOOT>>---
  150. Copyright (c) 1992-2018 The FreeBSD Project.
  151. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  152. The Regents of the University of California. All rights reserved.
  153. FreeBSD is a registered trademark of The FreeBSD Foundation.
  154. FreeBSD 12.0-RELEASE r341666 GENERIC arm
  155. FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
  156. VT: init without driver.
  157. module_register: cannot register ofwbus/pcib from kernel; already loaded from kernel
  158. Module ofwbus/pcib failed to register: 17
  159. module_register: cannot register simplebus/pcib from kernel; already loaded from kernel
  160. Module simplebus/pcib failed to register: 17
  161. CPU: ARM Cortex-A8 r3p2 (ECO: 0x00000000)
  162. CPU Features:
  163. Thumb2, Security, VMSAv7
  164. Optional instructions:
  165. UMULL, SMULL, SIMD(ext)
  166. LoUU:2 LoC:3 LoUIS:1
  167. Cache level 1:
  168. 32KB/64B 4-way data cache WT WB Read-Alloc
  169. 32KB/64B 4-way instruction cache Read-Alloc
  170. Cache level 2:
  171. 256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
  172. real memory = 0 (0 MB)
  173. avail memory = 509599744 (485 MB)
  174. No PSCI/SMCCC call function found
  175. Texas Instruments AM335x Processor, Revision ES2.1
  176. random: unblocking device.
  177. random: entropy device external interface
  178. kbd0 at kbdmux0
  179. ofwbus0: <Open Firmware Device Tree>
  180. simplebus0: <Flattened device tree simple bus> on ofwbus0
  181. simplebus1: <Flattened device tree simple bus> on simplebus0
  182. am335x_prcm0: <AM335x Power and Clock Management> mem 0x200000-0x203fff on simplebus1
  183. simplebus2: <Flattened device tree simple bus> mem 0x210000-0x211fff on simplebus1
  184. ti_scm0: <TI Control Module> mem 0-0x7ff on simplebus2
  185. regfix0: <Fixed Regulator> on ofwbus0
  186. clk_fixed0: <Fixed clock> on ofwbus0
  187. ti_aintc0: <TI AINTC Interrupt Controller> mem 0x48200000-0x48200fff on simplebus0
  188. ti_aintc0: Revision 5.0
  189. am335x_prcm0: Clocks: System 24.0 MHz, CPU 1000 MHz
  190. cpulist0: <Open Firmware CPU Group> on ofwbus0
  191. cpu0: <Open Firmware CPU> on cpulist0
  192. pmu0: <Performance Monitoring Unit> mem 0x4b000000-0x4bffffff irq 0 on ofwbus0
  193. ti_pinmux0: <TI Pinmux Module> mem 0x800-0xa37 on simplebus2
  194. am335x_scm0: <AM335x Control Module Extension> on ti_scm0
  195. gpio0: <TI AM335x General Purpose I/O (GPIO)> mem 0x44e07000-0x44e07fff irq 7 on simplebus0
  196. gpiobus0: <OFW GPIO bus> on gpio0
  197. gpioc0: <GPIO controller> on gpio0
  198. gpio1: <TI AM335x General Purpose I/O (GPIO)> mem 0x4804c000-0x4804cfff irq 8 on simplebus0
  199. gpiobus1: <OFW GPIO bus> on gpio1
  200. gpioc1: <GPIO controller> on gpio1
  201. gpio2: <TI AM335x General Purpose I/O (GPIO)> mem 0x481ac000-0x481acfff irq 9 on simplebus0
  202. gpiobus2: <OFW GPIO bus> on gpio2
  203. gpioc2: <GPIO controller> on gpio2
  204. gpio3: <TI AM335x General Purpose I/O (GPIO)> mem 0x481ae000-0x481aefff irq 10 on simplebus0
  205. gpiobus3: <OFW GPIO bus> on gpio3
  206. gpioc3: <GPIO controller> on gpio3
  207. \C0\C0]X.\D2\E2\A2%\81UART (16550 compatible)> mem 0x44e09000-0x44e0afff irq 11 on simplebus0
  208. uart0: console (115384,n,8,1)
  209. iichb0: <TI I2C Controller> mem 0x44e0b000-0x44e0bfff irq 17 on simplebus0
  210. iichb0: I2C revision 4.0 FIFO size: 32 bytes
  211. iichb1: <TI I2C Controller> mem 0x4819c000-0x4819cfff irq 19 on simplebus0
  212. iichb1: I2C revision 4.0 FIFO size: 32 bytes
  213. sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x48060000-0x48060fff irq 20 on simplebus0
  214. mmc0: <MMC/SD bus> on sdhci_ti0
  215. sdhci_ti1: <TI MMCHS (SDHCI 2.0)> mem 0x481d8000-0x481d8fff irq 21 on simplebus0
  216. mmc1: <MMC/SD bus> on sdhci_ti1
  217. ti_wdt0: <TI Watchdog Timer> mem 0x44e35000-0x44e35fff irq 23 on simplebus0
  218. ti_mbox0: <TI System Mailbox> mem 0x480c8000-0x480c81ff irq 26 on simplebus0
  219. ti_mbox0: revision 4.0
  220. am335x_dmtimer0: <AM335x DMTimer2> mem 0x48040000-0x480403ff irq 28 on simplebus0
  221. Event timer "DMTimer2" frequency 24000000 Hz quality 500
  222. am335x_dmtimer1: <AM335x DMTimer3> mem 0x48042000-0x480423ff irq 29 on simplebus0
  223. Timecounter "DMTimer3" frequency 24000000 Hz quality 500
  224. am335x_rtc0: <AM335x RTC (power management mode)> mem 0x44e3e000-0x44e3efff irq 34,35 on simplebus0
  225. am335x_rtc0: AM335X RTC v1.0.6
  226. usbss0: <TI AM33xx integrated USB OTG controller> mem 0x47400000-0x47400fff on simplebus0
  227. usbss0: TI AM335X USBSS v0.0.13
  228. musbotg0: <TI AM33xx integrated USB OTG controller> mem 0x47401400-0x474017ff,0x47401000-0x474011ff irq 56 on usbss0
  229. usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
  230. usbus0 on musbotg0
  231. musbotg1: <TI AM33xx integrated USB OTG controller> mem 0x47401c00-0x47401fff,0x47401800-0x474019ff irq 57 on usbss0
  232. usbus1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
  233. usbus1 on musbotg1
  234. cpswss0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a1007ff,0x4a101200-0x4a1012ff irq 38,39,40,41 on simplebus0
  235. cpswss0: CPSW SS Version 1.12 (0)
  236. cpswss0: Initial queue size TX=128 RX=384
  237. cpsw0: <Ethernet Switch Port> on cpswss0
  238. miibus0: <MII bus> on cpsw0
  239. smscphy0: <SMC LAN8710A 10/100 interface> PHY 0 on miibus0
  240. smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
  241. cpsw0: Ethernet address: 34:03:de:5e:2c:56
  242. fb0: <AM335x LCD controller> mem 0x4830e000-0x4830efff irq 43 on simplebus0
  243. ti_adc0: <TI ADC controller> mem 0x44e0d000-0x44e0dfff irq 44 disabled on simplebus0
  244. ti_adc0: scheme: 0x1 func: 0x730 rtl: 0 rev: 0.1 custom rev: 0
  245. gpioled0: <GPIO LEDs> on ofwbus0
  246. cryptosoft0: <software crypto>
  247. Timecounters tick every 1.000 msec
  248. iicbus0: <OFW I2C bus> on iichb0
  249. iic0: <I2C generic I/O> on iicbus0
  250. am335x_pmic0: <TI TPS65217 Power Management IC> at addr 0x48 irq 59 on iicbus0
  251. icee0: <AT24C256> at addr 0xa0 on iicbus0
  252. tda0 at addr 0xe0 on iicbus0
  253. iicbus1: <OFW I2C bus> on iichb1
  254. iic1: <I2C generic I/O> on iicbus1
  255. icee1: <AT24C256> at addr 0xa8 on iicbus1
  256. icee2: <AT24C256> at addr 0xaa on iicbus1
  257. icee3: <AT24C256> at addr 0xac on iicbus1
  258. icee4: <AT24C256> at addr 0xae on iicbus1
  259. usbus0: 480Mbps High Speed USB v2.0
  260. usbus1: 480Mbps High Speed USB v2.0
  261. ugen0.1: <Mentor Graphics OTG Root HUB> at usbus0
  262. uhub0: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
  263. ugen1.1: <Mentor Graphics OTG Root HUB> at usbus1
  264. uhub1: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
  265. mmcsd0: 16GB <SDHC SD16G 3.0 SN 01834774 MFG 04/2016 by 39 PH> at mmc0 48.0MHz/4bit/65535-block
  266. uhub1: 1 port with 1 removable, self powered
  267. uhub0: 1 port with 1 removable, self powered
  268. ugen0.2: <The FreeBSD Project (https://www.FreeBSD.org) Virtual serial port> at usbus0
  269. ugen0.2: <The FreeBSD Project (https://www.FreeBSD.org) Virtual serial port> at usbus0 (disconnected)
  270. ugen0.2: <The FreeBSD Project (https://www.FreeBSD.org) Virtual serial port> at usbus0
  271. umodem0 on uhub0
  272. umodem0: <Virtual serial port> on usbus0
  273. umodem0: data interface 1, has CM over data, has break
  274. mmcsd1: 4GB <MMCHC M62704 0.2 SN 0B0F8A43 MFG 08/2018 by 112 0x0000> at mmc1 48.0MHz/8bit/65535-block
  275. mmcsd1boot0: 2MB partion 1 at mmcsd1
  276. mmcsd1boot1: 2MB partion 2 at mmcsd1
  277. mmcsd1rpmb: 524kB partion 3 at mmcsd1
  278. am335x_pmic0: TPS65217C ver 1.2 powered by USB
  279. tda0: TDA19988
  280. tda0: failed to read EDID
  281. Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
  282. Warning: no time-of-day clock registered, system time will not be set accurately
  283. Setting hostuuid: 605bd75b-f9d2-11e8-8ca5-3403de5e2c56.
  284. Setting hostid: 0x1afc54cc.
  285. Starting file system checks:
  286. /dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
  287. /dev/ufs/rootfs: clean, 3303088 free (72 frags, 412877 blocks, 0.0% fragmentation)
  288. Mounting local filesystems:.
  289. ELF ldconfig path: /lib /usr/lib /usr/lib/compat
  290. Soft Float compatibility ldconfig path:
  291. Setting hostname: generic.
  292. Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
  293. Feeding entropy: .
  294. lo0: link state changed to UP
  295. cpsw0: link state changed to DOWN
  296. Starting Network: lo0 cpsw0.
  297. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
  298. options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
  299. inet6 ::1 prefixlen 128
  300. inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
  301. inet 127.0.0.1 netmask 0xff000000
  302. groups: lo
  303. nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
  304. cpsw0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
  305. options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
  306. ether 34:03:de:5e:2c:56
  307. media: Ethernet autoselect (none)
  308. status: no carrier
  309. nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
  310. Starting devd.
  311. add host 127.0.0.1: gateway lo0 fib 0: route already in table
  312. add host ::1: gateway lo0 fib 0: route already in table
  313. add net fe80::: gateway ::1
  314. add net ff02::: gateway ::1
  315. add net ::ffff:0.0.0.0: gateway ::1
  316. add net ::0.0.0.0: gateway ::1
  317. Waiting 30s for the default route interface: .....(no carrier)
  318. Creating and/or trimming log files.
  319. Starting syslogd.
  320. Clearing /tmp (X related).
  321. Updating motd:.
  322. Mounting late filesystems:.
  323. Performing sanity check on sshd configuration.
  324. Starting sshd.
  325. Starting cron.
  326. Starting background file system checks in 60 seconds.
  327.  
  328. Fri Dec 7 03:50:17 UTC 2018
  329.  
  330.  
  331.  
  332. FreeBSD/arm (generic) (ttyu0)
  333.  
  334.  
  335.  
  336.  
  337.  
  338. login: free    root
  339. Password:
  340. Dec 7 03:50:32 generic login[892]: ROOT LOGIN (root) ON ttyu0
  341.  
  342.  
  343. Last login: Fri Dec 7 03:49:22 on ttyu0
  344. FreeBSD 12.0-RELEASE r341666 GENERIC
  345.  
  346. Welcome to FreeBSD!
  347.  
  348. Release Notes, Errata: https://www.FreeBSD.org/releases/
  349. Security Advisories: https://www.FreeBSD.org/security/
  350. FreeBSD Handbook: https://www.FreeBSD.org/handbook/
  351. FreeBSD FAQ: https://www.FreeBSD.org/faq/
  352. Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
  353. FreeBSD Forums: https://forums.FreeBSD.org/
  354.  
  355. Documents installed with the system are in the /usr/local/share/doc/freebsd/
  356. directory, or can be installed later with: pkg install en-freebsd-doc
  357. For other languages, replace "en" with a language code like de or fr.
  358.  
  359. Show the version of FreeBSD installed: freebsd-version ; uname -a
  360. Please include that output and any error messages when posting questions.
  361. Introduction to manual pages: man man
  362. FreeBSD directory layout: man hier
  363.  
  364. Edit /etc/motd to change this login announcement.
  365. 78\00root@generic:~ # oipconfig
  366.  
  367.  
  368. ipconfig: Command not found.
  369. root@generic:~ # ifconfig
  370.  
  371.  
  372. cpsw0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
  373. options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
  374. ether 34:03:de:5e:2c:56
  375. media: Ethernet autoselect (none)
  376. status: no carrier
  377. nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
  378. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
  379. options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
  380. inet6 ::1 prefixlen 128
  381. inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
  382. inet 127.0.0.1 netmask 0xff000000
  383. groups: lo
  384. nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
  385. root@generic:~ # ls /dev/
  386.  
  387.  
  388. bpf ctty cuau0.init diskid geom.ctl icee0 iic0 klog mem mmcsd0s2a mmcsd1s1 openfirm sequencer0 stdout ttyu0 ugen0.1 usb
  389. bpf0 cuaU0 cuau0.lock ext2fs gpioc0 icee1 iic1 kmem midistat mmcsd1 msdosfs pci sndstat sysmouse ttyu0.init ugen0.2 usbctl
  390. console cuaU0.init devctl fd gpioc1 icee2 input led mmcsd0 mmcsd1boot0 music0 ptmx snp ttyU0 ttyu0.lock ugen1.1 vcio
  391. consolectl cuaU0.lock devctl2 fido gpioc2 icee3 kbd0 log mmcsd0s1 mmcsd1boot1 nfslock random stderr ttyU0.init ufs uinput xpt0
  392. crypto cuau0 devstat full gpioc3 icee4 kbdmux0 mdctl mmcsd0s2 mmcsd1rpmb null reroot stdin ttyU0.lock ufssuspend urandom zero
  393. root@generic:~ # Dec 7 04:05:43 generic login[893]: ROOT LOGIN (root) ON ttyU0
  394.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!