Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
- Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
- Reading configuration file '/etc/wpa_supplicant.conf'
- ctrl_interface='/var/run/wpa_supplicant'
- update_config=1
- fast_reauth=1
- ap_scan=1
- Line: 7 - start of a new network block
- ssid - hexdump_ascii(len=10):
- 52 69 73 69 6e 67 73 75 6e 32 Risingsun2
- key_mgmt: 0x2
- pairwise: 0x8
- group: 0x8
- PSK - hexdump(len=32): [REMOVED]
- Priority group 0
- id=0 ssid='Risingsun2'
- Initializing interface (2) 'wlan0'
- WEXT: cfg80211-based driver detected
- Interface wlan0 set UP - waiting a second for the driver to complete initialization
- SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
- capabilities: key_mgmt 0xf enc 0xf flags 0x0
- WEXT: Operstate: linkmode=1, operstate=5
- Own MAC address: 00:14:51:7e:bf:51
- wpa_driver_wext_set_wpa
- wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
- wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
- wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
- wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
- wpa_driver_wext_set_countermeasures
- wpa_driver_wext_set_drop_unencrypted
- RSN: flushing PMKID list in the driver
- Setting scan request: 0 sec 100000 usec
- WPS: UUID based on MAC address - hexdump(len=16): 2e 08 4e 38 b1 4d 5c b1 ad ae ad bf 67 8c ed fe
- WPS: Build Beacon and Probe Response IEs
- WPS: * Version
- WPS: * Wi-Fi Protected Setup State (0)
- WPS: * Version
- WPS: * Wi-Fi Protected Setup State (0)
- WPS: * Response Type (2)
- WPS: * UUID-E
- WPS: * Manufacturer
- WPS: * Model Name
- WPS: * Model Number
- WPS: * Serial Number
- WPS: * Primary Device Type
- WPS: * Device Name
- WPS: * Config Methods (0)
- WPS: * RF Bands (3)
- EAPOL: SUPP_PAE entering state DISCONNECTED
- EAPOL: KEY_RX entering state NO_KEY_RECEIVE
- EAPOL: SUPP_BE entering state INITIALIZE
- EAP: EAP entering state DISABLED
- Added interface wlan0
- RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b06 len=8
- State: DISCONNECTED -> SCANNING
- Starting AP scan (broadcast SSID)
- Trying to get current scan results first without requesting a new scan to speed up initial association
- Received 0 bytes of scan results (0 BSSes)
- Cached scan results are empty - not posting
- Selecting BSS from priority group 0
- Try to find WPA-enabled AP
- Try to find non-WPA AP
- No suitable AP found.
- Setting scan request: 0 sec 0 usec
- Starting AP scan (broadcast SSID)
- Scan requested (ret=0) - scan timeout 5 seconds
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b19 len=8
- Received 1615 bytes of scan results (4 BSSes)
- New scan results available
- WPS: attr type=0x104a len=1
- WPS: attr type=0x1044 len=1
- WPS: attr type=0x104a len=1
- WPS: attr type=0x1044 len=1
- Selecting BSS from priority group 0
- Try to find WPA-enabled AP
- 0: 94:44:52:fd:51:24 ssid='madonna' wpa_ie_len=22 rsn_ie_len=20 caps=0x11
- skip - SSID mismatch
- 1: 00:24:b2:28:e8:a2 ssid='Risingsun2' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
- selected based on WPA IE
- selected WPA AP 00:24:b2:28:e8:a2 ssid='Risingsun2'
- Trying to associate with 00:24:b2:28:e8:a2 (SSID='Risingsun2' freq=2437 MHz)
- Cancelling scan request
- WPA: clearing own WPA/RSN IE
- Automatic auth_alg selection: 0x1
- WPA: using IEEE 802.11i/D3.0
- WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
- WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
- WPA: clearing AP RSN IE
- WPA: using GTK TKIP
- WPA: using PTK TKIP
- WPA: using KEY_MGMT WPA-PSK
- WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
- No keys have been configured - skip key clearing
- wpa_driver_wext_set_drop_unencrypted
- State: SCANNING -> ASSOCIATING
- wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
- WEXT: Operstate: linkmode=-1, operstate=5
- wpa_driver_wext_associate
- wpa_driver_wext_set_psk
- Setting authentication timeout: 10 sec 0 usec
- EAPOL: External notification - EAP success=0
- EAPOL: External notification - EAP fail=0
- EAPOL: External notification - portControl=Auto
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b06 len=8
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b04 len=12
- EAPOL: disable timer tick
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement