vintage irssi config theme

# When testing changes, the easiest way to reload the theme is with /RELOAD.
# This reloads the configuration file too, so if you did any changes remember
# to /SAVE it first. Remember also that /SAVE overwrites the theme file with
# old data so keep backups :)

# TEMPLATES:

# The real text formats that irssi uses are the ones you can find with
# /FORMAT command. Back in the old days all the colors and texts were mixed
# up in those formats, and it was really hard to change the colors since you
# might have had to change them in tens of different places. So, then came
# this templating system.

# Now the /FORMATs don't have any colors in them, and they also have very
# little other styling. Most of the stuff you need to change is in this
# theme file. If you can't change something here, you can always go back
# to change the /FORMATs directly, they're also saved in these .theme files.

# So .. the templates. They're those {blahblah} parts you see all over the
# /FORMATs and here. Their usage is simply {name parameter1 parameter2}.
# When irssi sees this kind of text, it goes to find "name" from abstracts
# block below and sets "parameter1" into $0 and "parameter2" into $1 (you
# can have more parameters of course). Templates can have subtemplates.
# Here's a small example:
# /FORMAT format hello {colorify {underline world}}
# abstracts = { colorify = "%G$0-%n"; underline = "%U$0-%U"; }
# When irssi expands the templates in "format", the final string would be:
# hello %G%Uworld%U%n
# ie. underlined bright green "world" text.
# and why "$0-", why not "$0"? $0 would only mean the first parameter,
# $0- means all the parameters. With {underline hello world} you'd really
# want to underline both of the words, not just the hello (and world would
# actually be removed entirely).

# COLORS:

# You can find definitions for the color format codes in docs/formats.txt.

# There's one difference here though. %n format. Normally it means the
# default color of the terminal (white mostly), but here it means the
# "reset color back to the one it was in higher template". For example
# if there was /FORMAT test %g{foo}bar, and foo = "%Y$0%n", irssi would
# print yellow "foo" (as set with %Y) but "bar" would be green, which was
# set at the beginning before the {foo} template. If there wasn't the %g
# at start, the normal behaviour of %n would occur. If you _really_ want
# to use the terminal's default color, use %N.

#############################################################################

# default foreground color (%N) - -1 is the "default terminal color"
default_color = "-1";

# print timestamp/servertag at the end of line, not at beginning
info_eol = "false";

# these characters are automatically replaced with specified color
# (dark grey by default)
replaces = { "[]=" = "%g$*%n"; };

abstracts = {
  ##
  ## generic
  ##

  indent = "11";
  # text to insert at the beginning of each non-message line
  # line_start = "%g//%n ";
  line_start = "";

  # timestamp styling, nothing by default
  timestamp = "";

  # any kind of text that needs hilighting, default is to bold
  hilight = "%_$*%_";

  # any kind of error message, default is bright red
  error = "%R$*%n";

  # channel name is printed
  channel = "%b$*%n";

  # nick is printed
  nick = "%_$*%_";

  # nick host is printed
  nickhost = "%g$*";

  # server name is printed
  server = "%_$*%_";

  # some kind of comment is printed
  comment = "%n(%b\"$*\"%n);";

  # reason for something is printed (part, quit, kick, ..)
  reason = "{comment $*}";

  # mode change is printed ([+o nick])
  mode = " {comment $0}";

  ## channel specific messages

  # highlighted nick/host is printed (joins)
  channick_hilight = "%g$*%N";
  chanhost_hilight = "{nickhost $*}";

  # nick/host is printed (parts, quits, etc.)
  channick = "$*";
  chanhost = "{nickhost $*}";

  # highlighted channel name is printed
  channelhilight = "%g$*%n";

  # ban/ban exception/invite list mask is printed
  ban = "$*";

  # # text to insert at the beginning of each non-message line
  # line_start = "%B-%n!%B-%n ";
  #
  # # timestamp styling, nothing by default
  # timestamp = "";
  #
  # # any kind of text that needs hilighting, default is to bold
  # hilight = "%_$*%_";
  #
  # # any kind of error message, default is bright red
  # error = "%R$*%n";
  #
  # # channel name is printed
  # channel = "%_$*%_";
  #
  # # nick is printed
  # nick = "%_$*%_";
  #
  # # nick host is printed
  # nickhost = "[$*]";
  #
  # # server name is printed
  # server = "%_$*%_";
  #
  # # some kind of comment is printed
  # comment = "[$*]";
  #
  # # reason for something is printed (part, quit, kick, ..)
  # reason = "{comment $*}";
  #
  # # mode change is printed ([+o nick])
  # mode = "{comment $*}";
  #
  # ##
  # ## channel specific messages
  # ##
  #
  # # highlighted nick/host is printed (joins)
  # channick_hilight = "%C$*%n";
  # chanhost_hilight = "{nickhost %c$*%n}";
  #
  # # nick/host is printed (parts, quits, etc.)
  # channick = "%c$*%n";
  # chanhost = "{nickhost $*}";
  #
  # # highlighted channel name is printed
  # channelhilight = "%c$*%n";
  #
  # # ban/ban exception/invite list mask is printed
  # ban = "%c$*%n";

  ##
  ## messages
  ##


  # the basic styling of how to print message, $0 = nick mode, $1 = nick
  # msgnick = " $1 %N %|";
  msgnick = "$1 %k│%n %|";
  # msgnick = " $1 %K· %n";

  # $0 = nick mode, $1 = nick
  ownmsgnick = "$1 %k│%n %|%r";
  # msgnick = " $1 %K· %n";
  ownnick = "%r$*%n";

  # public message in channel, $0 = nick mode, $1 = nick
  pubmsgnick = "$1 %k│%n %|";
  pubnick = "%N$*%n";

  # public highlighted message in channel
  pubmsghinick = "$1 %k│%n %|%r";
  #menick = "%R$*%n";
  menick = "%K$* %k│%n %|%b";

  # channel name is printed with message
  msgchannel = "%K:%m$*%n";

  # private message, $0 = nick, $1 = host
  privmsg = "$0=%b\"$1-\"%n ";

  # private message from you, $0 = "msg", $1 = target nick
  ownprivmsg = "$0=%b\"$1-\"%n ";

  # private message in query
  # privmsgnick = "{msgnick $*}";
  privmsgnick = "%|%K<%N %|";

  # own private message in query
  #ownprivmsgnick = "{privmsgnick $*}";
  ownprivmsgnick = "%k>%N %|";
  #ownprivnick = "$*";

  # # the basic styling of how to print message, $0 = nick mode, $1 = nick
  # msgnick = "%K<%n$0$1-%K>%n %|";
  #
  # # message from you is printed. "msgownnick" specifies the styling of the
  # # nick ($0 part in msgnick) and "ownmsgnick" specifies the styling of the
  # # whole line.
  #
  # # Example1: You want the message text to be green:
  # # ownmsgnick = "{msgnick $0 $1-}%g";
  # # Example2.1: You want < and > chars to be yellow:
  # # ownmsgnick = "%Y{msgnick $0 $1-%Y}%n";
  # # (you'll also have to remove <> from replaces list above)
  # # Example2.2: But you still want to keep <> grey for other messages:
  # # pubmsgnick = "%K{msgnick $0 $1-%K}%n";
  # # pubmsgmenick = "%K{msgnick $0 $1-%K}%n";
  # # pubmsghinick = "%K{msgnick $1 $0$2-%n%K}%n";
  # # ownprivmsgnick = "%K{msgnick $*%K}%n";
  # # privmsgnick = "%K{msgnick %R$*%K}%n";
  #
  # # $0 = nick mode, $1 = nick
  # ownmsgnick = "{msgnick $0 $1-}";
  # ownnick = "%_$*%n";
  #
  # # public message in channel, $0 = nick mode, $1 = nick
  # pubmsgnick = "{msgnick $0 $1-}";
  # pubnick = "%N$*%n";
  #
  # # public message in channel meant for me, $0 = nick mode, $1 = nick
  # pubmsgmenick = "{msgnick $0 $1-}";
  # menick = "%Y$*%n";
  #
  # # public highlighted message in channel
  # # $0 = highlight color, $1 = nick mode, $2 = nick
  # pubmsghinick = "{msgnick $1 $0$2-%n}";
  #
  # # channel name is printed with message
  # msgchannel = "%K:%c$*%n";
  #
  # # private message, $0 = nick, $1 = host
  # privmsg = "[%R$0%K(%r$1-%K)%n] ";
  #
  # # private message from you, $0 = "msg", $1 = target nick
  # ownprivmsg = "[%r$0%K(%R$1-%K)%n] ";
  #
  # # own private message in query
  # ownprivmsgnick = "{msgnick $*}";
  # ownprivnick = "%_$*%n";
  #
  # # private message in query
  # privmsgnick = "{msgnick %R$*%n}";

  ##
  ## Actions (/ME stuff)
  ##

  # used internally by this theme
  action_core = "%_ * $*%n";

  # generic one that's used by most actions
  action = "{action_core $*} ";

  # own action, both private/public
  ownaction = "{action $*}";

  # own action with target, both private/public
  ownaction_target = "{action_core $0}%K:%c$1%n ";

  # private action sent by others
  pvtaction = "%_ (*) $*%n ";
  pvtaction_query = "{action $*}";

  # public action sent by others
  pubaction = "{action $*}";


  ##
  ## other IRC events
  ##

  # whois
  whois = "%# $[8]0 : $1-";

  # notices
  ownnotice = "[%r$0%K(%R$1-%K)]%n ";
  notice = "%K-%M$*%K-%n ";
  pubnotice_channel = "%K:%m$*";
  pvtnotice_host = "%K(%m$*%K)";
  servernotice = "%g!$*%n ";

  # CTCPs
  ownctcp = "[%r$0%K(%R$1-%K)] ";
  ctcp = "%g$*%n";

  # wallops
  wallop = "%_$*%n: ";
  wallop_nick = "%n$*";
  wallop_action = "%_ * $*%n ";

  # netsplits
  netsplit = "%R$*%n";
  netjoin = "%C$*%n";

  # /names list
  names_prefix = "";
  names_nick = "[%_$0%_$1-] ";
  names_nick_op = "{names_nick $*}";
  names_nick_halfop = "{names_nick $*}";
  names_nick_voice = "{names_nick $*}";
  names_users = "[%g$*%n]";
  names_channel = "%G$*%n";

  # DCC
  dcc = "%g$*%n";
  dccfile = "%_$*%_";

  # DCC chat, own msg/action
  dccownmsg = "[%r$0%K($1-%K)%n] ";
  dccownnick = "%R$*%n";
  dccownquerynick = "%_$*%n";
  dccownaction = "{action $*}";
  dccownaction_target = "{action_core $0}%K:%c$1%n ";

  # DCC chat, others
  dccmsg = "[%G$1-%K(%g$0%K)%n] ";
  dccquerynick = "%G$*%n";
  dccaction = "%_ (*dcc*) $*%n %|";

  ##
  ## statusbar
  ##

  # default background for all statusbars. You can also give
  # the default foreground color for statusbar items.
  sb_background = "%n";

  # default backround for "default" statusbar group
  #sb_default_bg = "%4";
  # background for prompt / input line
  sb_prompt_bg = "%n";
  # background for info statusbar
  sb_info_bg = "%8";
  # background for topicbar (same default)
  #sb_topic_bg = "%4";

  # text at the beginning of statusbars. sb-item already puts
  # space there,so we don't use anything by default.
  sbstart = "";
  # text at the end of statusbars. Use space so that it's never
  # used for anything.
  sbend = " ";

  topicsbstart = "{sbstart $*}";
  topicsbend = "{sbend $*}";

  prompt = " %r» ";

  sb = "%n$*%n";
  sbmode = "(%c+%n$*)";
  sbaway = " (%GzZzZ%n)";
  sbservertag = ":$0 (change with ^X)";
  sbnickmode = "$0";

  # activity in statusbar

  # ',' separator
  sb_act_sep = "%c$*";
  # normal text
  sb_act_text = "%c$*";
  # public message
  sb_act_msg = "%W$*";
  # hilight
  sb_act_hilight = "%M$*";
  # hilight with specified color, $0 = color, $1 = text
  sb_act_hilight_color = "$0$1-%n";
};
formats = {
  # "fe-common/core" = { pubmsg = "%b<%w$2\00303$[-11]0%b> %K|%n $1"; };
  "fe-common/core" = {
    line_start = "{line_start}";
    line_start_irssi = "{line_start}";

    join = "%R{channick $[-11]0}%n %k> %nhas joined ";
    part = "%R{channick $[-11]0}%n %k< %nhas left ";
    kick = "%R{nick $[-11]2}%k%| > kicked {channick_hilight $0}%n {reason $3}";
    quit = "%R{channick $[-11]0}%k%| < has quit ";
    # quit_once = "{channel $3} {channick $0} {chanhost $1} %Kquit {reason %C$2}";

    nick_changed = "{nick $[-11]0} %G>%n {channick $1}";
    your_nick_changed = "%|%y you %G>%n {channick $1}";

    pubmsg = "{pubmsgnick $2 {pubnick \00310$[-11]0}}$1";

    own_msg = "{ownmsgnick $2 {ownnick $[-11]0}}$1%|";
    own_msg_channel = "{ownmsgnick $3 {ownnick $0}{msgchannel $1}}$2";
    own_msg_private_query = "{ownprivmsgnick {ownprivnick $[-6]2}}$1";

    pubmsg_me = "{menick $[-11]0}$1";
    pubmsg_me_channel = "{pubmsghinick $3 {menick $[-11]0}{msgchannel $1}}$2";

    pubmsg_hilight = "{pubmsghinick $3 {menick $[-11]1}} %K│ %R$2";
    pubmsg_hilight_channel = "{pubmsghinick $0 $[-11]$4{msgchannel $2}}$3";

    pubmsg_channel = "{pubmsgnick {pubnick %G$[-13]0}$2}$1";
    msg_private_query = "{privmsgnick $[-31]0}$2";
    new_topic = "%B{channick $[-11]0}%n %y> %|%nchanged the topic to {channick $2}";

    endofnames = "%Y!%K! names %Y!%m Total: {hilight $2} ops, {hilight $3} halfops, {hilight $4} voices, {hilight $5} normal%n";
  };
  "fe-common/irc" = {
    server_chanmode_change = " mode %y>%n {channick $1}";
    usermode_change = "%B%|{nick $[-11]1} %y> %nreceived %r{mode $0}";
    topic = " %rtopic > %|%B$1";
    topic_info = "%B{nick $[-11]0}%n %y> %nset the topic";
    channel_created = "%r{$channel $[-11]0}%n %y> %ncreated on %r$1";
    channel_mode = "%B{channick $[-11]2}%n %y> %nset {$channelhilight $0} $1";
    chanmode_change = "%B{channick $[-11]2}%n %y> %nset mode %r$1";
    channel_synced = "%r{$channel $[-11]0}%n %y> %nsynced in %C{hilight $1} %nseconds";
    own_action = "{ownaction $[-11]0} $1";
    action_private = "{pvtaction $[-11]0}$1";
    action_private_query = "{pvtaction_query $[-11]0} $2";
    action_public = "{pubaction $[-11]0}$1";
  };
};