API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 29th, 2019
139
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.75 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.14.146 (builder@buildhost) (gcc version 7.4.0 (Op enWrt GCC 7.4.0 r11126-cb289777ca)) #0 SMP Thu Sep 26 20:15:25 2019
  2. [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
  5. [ 0.000000] MIPS: machine is ASUS RT-AC85P
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 10000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] VPE topology {2,2} total 4
  10. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  11. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt es
  12. [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  13. [ 0.000000] Zone ranges:
  14. [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
  15. [ 0.000000] HighMem empty
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
  19. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
  20. [ 0.000000] On node 0 totalpages: 65536
  21. [ 0.000000] free_area_init_node: node 0, pgdat 80632660, node_mem_map 8100300 0
  22. [ 0.000000] Normal zone: 576 pages used for memmap
  23. [ 0.000000] Normal zone: 0 pages reserved
  24. [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
  25. [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4e0 with crng_init=0
  26. [ 0.000000] percpu: Embedded 14 pages/cpu s26096 r8192 d23056 u57344
  27. [ 0.000000] pcpu-alloc: s26096 r8192 d23056 u57344 alloc=14*4096
  28. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  29. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
  30. [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs 2
  31. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  32. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  33. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  34. [ 0.000000] Writing ErrCtl register=00010c00
  35. [ 0.000000] Readback ErrCtl register=00010c00
  36. [ 0.000000] Memory: 251432K/262144K available (5006K kernel code, 257K rwdata , 1080K rodata, 1260K init, 260K bss, 10712K reserved, 0K cma-reserved, 0K highm em)
  37. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [ 0.000000] Hierarchical RCU implementation.
  39. [ 0.000000] NR_IRQS: 256
  40. [ 0.000000] CPU Clock: 880MHz
  41. [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478ab b4, max_idle_ns: 440795247997 ns
  42. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 4343773742 ns
  43. [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 48806 45118ns
  44. [ 0.015502] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
  45. [ 0.087820] pid_max: default: 32768 minimum: 301
  46. [ 0.097191] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  47. [ 0.110213] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  48. [ 0.126326] Hierarchical SRCU implementation.
  49. [ 0.135876] smp: Bringing up secondary CPUs ...
  50. [ 0.145556] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  51. [ 0.145566] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt es
  52. [ 0.145577] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  53. [ 0.145714] CPU1 revision is: 0001992f (MIPS 1004Kc)
  54. [ 0.205181] Synchronize counters for CPU 1: done.
  55. [ 0.269298] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  56. [ 0.269307] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt es
  57. [ 0.269315] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  58. [ 0.269395] CPU2 revision is: 0001992f (MIPS 1004Kc)
  59. [ 0.326127] Synchronize counters for CPU 2: done.
  60. [ 0.386436] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  61. [ 0.386444] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt es
  62. [ 0.386452] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  63. [ 0.386534] CPU3 revision is: 0001992f (MIPS 1004Kc)
  64. [ 0.445695] Synchronize counters for CPU 3: done.
  65. [ 0.505311] smp: Brought up 1 node, 4 CPUs
  66. [ 0.517509] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
  67. [ 0.536997] futex hash table entries: 1024 (order: 3, 32768 bytes)
  68. [ 0.549537] pinctrl core: initialized pinctrl subsystem
  69. [ 0.561307] NET: Registered protocol family 16
  70. [ 0.580266] FPU Affinity set after 11720 emulations
  71. [ 0.581152] pull PCIe RST: RALINK_RSTCTRL = 4000000
  72. [ 0.891218] release PCIe RST: RALINK_RSTCTRL = 7000000
  73. [ 0.901283] ***** Xtal 40MHz *****
  74. [ 0.908011] release PCIe RST: RALINK_RSTCTRL = 7000000
  75. [ 0.918222] Port 0 N_FTS = 1b105000
  76. [ 0.925118] Port 1 N_FTS = 1b105000
  77. [ 0.932046] Port 2 N_FTS = 1b102800
  78. [ 2.090904] PCIE2 no card, disable it(RST&CLK)
  79. [ 2.099597] -> 21007f2
  80. [ 2.104415] PCIE0 enabled
  81. [ 2.109613] PCIE1 enabled
  82. [ 2.114797] PCI host bridge /pcie@1e140000 ranges:
  83. [ 2.124321] MEM 0x0000000060000000..0x000000006fffffff
  84. [ 2.134686] IO 0x000000001e160000..0x000000001e16ffff
  85. [ 2.145044] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
  86. [ 2.168590] mt7621_gpio 1e000600.gpio: registering 32 gpios
  87. [ 2.179958] mt7621_gpio 1e000600.gpio: registering 32 gpios
  88. [ 2.191195] mt7621_gpio 1e000600.gpio: registering 32 gpios
  89. [ 2.203847] PCI host bridge to bus 0000:00
  90. [ 2.211865] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
  91. [ 2.225544] pci_bus 0000:00: root bus resource [io 0xffffffff]
  92. [ 2.237270] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  93. [ 2.250760] pci_bus 0000:00: No busn resource found for root bus, will use [b us 00-ff]
  94. [ 2.266518] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
  95. [ 2.266557] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  96. [ 2.266569] pci 0000:00:00.0: reg 0x14: [mem 0x60200000-0x6020ffff]
  97. [ 2.266633] pci 0000:00:00.0: supports D1
  98. [ 2.266641] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  99. [ 2.266903] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
  100. [ 2.266939] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  101. [ 2.266959] pci 0000:00:01.0: reg 0x14: [mem 0x60210000-0x6021ffff]
  102. [ 2.267029] pci 0000:00:01.0: supports D1
  103. [ 2.267041] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
  104. [ 2.267526] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
  105. [ 2.267590] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
  106. [ 2.267913] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  107. [ 2.268151] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
  108. [ 2.268214] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
  109. [ 2.268542] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  110. [ 2.268567] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
  111. [ 2.268665] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
  112. [ 2.281707] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
  113. [ 2.295511] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
  114. [ 2.308647] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
  115. [ 2.322467] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
  116. [ 2.335945] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
  117. [ 2.349433] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
  118. [ 2.362907] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
  119. [ 2.376391] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bi t]
  120. [ 2.390908] pci 0000:00:00.0: PCI bridge to [bus 01]
  121. [ 2.400725] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
  122. [ 2.414233] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bi t]
  123. [ 2.428748] pci 0000:00:01.0: PCI bridge to [bus 02]
  124. [ 2.438573] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
  125. [ 2.453465] clocksource: Switched to clocksource GIC
  126. [ 2.464850] NET: Registered protocol family 2
  127. [ 2.474226] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  128. [ 2.487988] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  129. [ 2.500770] TCP: Hash tables configured (established 2048 bind 2048)
  130. [ 2.513533] UDP hash table entries: 256 (order: 1, 8192 bytes)
  131. [ 2.525032] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  132. [ 2.537709] NET: Registered protocol family 1
  133. [ 2.546306] PCI: CLS 0 bytes, default 32
  134. [ 2.783402] 4 CPUs re-calibrate udelay(lpj = 2924544)
  135. [ 2.794792] Crashlog allocated RAM at address 0x3f00000
  136. [ 2.805176] random: fast init done
  137. [ 2.805560] workingset: timestamp_bits=14 max_order=16 bucket_order=2
  138. [ 2.832631] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  139. [ 2.844121] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
  140. [ 2.867253] io scheduler noop registered
  141. [ 2.874946] io scheduler deadline registered (default)
  142. [ 2.886299] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  143. [ 2.902339] console [ttyS0] disabled
  144. [ 2.909439] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
  145. [ 2.927357] console [ttyS0] enabled
  146. [ 2.941115] bootconsole [early0] disabled
  147. [ 2.959164] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
  148. [ 2.973207] Enable NFI Clock
  149. [ 2.979032] # MTK NAND # : Use HW ECC
  150. [ 2.986341] Device found in MTK table, ID: c2f1, EXT_ID: 809502
  151. [ 2.998121] Support this Device in MTK table! c2f1
  152. [ 3.008006] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
  153. [ 3.020874] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
  154. [ 3.033518] nand: Macronix NAND 128MiB 3,3V 8-bit
  155. [ 3.042864] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 64
  156. [ 3.057947] Scanning device for bad blocks
  157. [ 3.281971] Bad eraseblock 925 at 0x0000073a0000
  158. [ 3.314073] 7 fixed-partitions partitions found on MTD device MT7621-NAND
  159. [ 3.327580] Creating 7 MTD partitions on "MT7621-NAND":
  160. [ 3.337986] 0x000000000000-0x0000000e0000 : "u-boot"
  161. [ 3.348932] 0x0000000e0000-0x0000001e0000 : "u-boot-env"
  162. [ 3.360574] 0x0000001e0000-0x0000002e0000 : "factory"
  163. [ 3.371707] 0x0000002e0000-0x0000003e0000 : "factory2"
  164. [ 3.383049] 0x0000003e0000-0x0000007e0000 : "kernel"
  165. [ 3.394126] 0x0000007e0000-0x0000035e0000 : "ubi"
  166. [ 3.404967] 0x0000035e0000-0x0000067e0000 : "firmware2"
  167. [ 3.416844] [mtk_nand] probe successfully!
  168. [ 3.425708] Signature matched and data read!
  169. [ 3.434203] load_fact_bbt success 1023
  170. [ 3.442347] libphy: Fixed MDIO Bus: probed
  171. [ 3.516013] libphy: mdio: probed
  172. [ 4.924236] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
  173. [ 4.936812] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe 100000, irq 22
  174. [ 4.955997] NET: Registered protocol family 10
  175. [ 4.966487] Segment Routing with IPv6
  176. [ 4.973936] NET: Registered protocol family 17
  177. [ 4.982846] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  178. [ 5.008638] 8021q: 802.1Q VLAN Support v1.8
  179. [ 5.019969] UBI: auto-attach mtd5
  180. [ 5.026642] ubi0: attaching mtd5
  181. [ 5.452728] ubi0: scanning is finished
  182. [ 5.475234] ubi0: attached mtd5 (name "ubi", size 46 MiB)
  183. [ 5.486004] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  184. [ 5.499687] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  185. [ 5.513194] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  186. [ 5.527051] ubi0: good PEBs: 368, bad PEBs: 0, corrupted PEBs: 0
  187. [ 5.539001] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 12 8
  188. [ 5.553375] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequ ence number: 305087678
  189. [ 5.571379] ubi0: available PEBs: 0, total reserved PEBs: 368, PEBs reserved for bad PEB handling: 20
  190. [ 5.589753] ubi0: background thread "ubi_bgt0d" started, PID 388
  191. [ 5.591570] block ubiblock0_0: created from ubi0:0(rootfs)
  192. [ 5.612648] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  193. [ 5.626517] hctosys: unable to open rtc device (rtc0)
  194. [ 5.643228] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  195. [ 5.661707] Freeing unused kernel memory: 1260K
  196. [ 5.670753] This architecture does not have kernel memory protection.
  197. [ 6.223988] init: Console is alive
  198. [ 6.230997] init: - watchdog -
  199. [ 6.836330] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
  200. [ 6.887535] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  201. [ 6.983144] usbcore: registered new interface driver usbfs
  202. [ 6.994227] usbcore: registered new interface driver hub
  203. [ 7.004978] usbcore: registered new device driver usb
  204. [ 7.023130] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, usin g dummy regulator
  205. [ 7.040590] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
  206. [ 7.052340] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, us ing dummy regulator
  207. [ 7.070034] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
  208. [ 7.080655] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus numb er 1
  209. [ 7.103602] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 qu irks 0x0000000000210010
  210. [ 7.121875] xhci-mtk 1e1c0000.xhci: irq 21, io mem 0x1e1c0000
  211. [ 7.134405] hub 1-0:1.0: USB hub found
  212. [ 7.141944] hub 1-0:1.0: 2 ports detected
  213. [ 7.150648] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
  214. [ 7.161283] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus numb er 2
  215. [ 7.176205] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
  216. [ 7.189242] usb usb2: We don't know the algorithms for LPM for this host, dis abling LPM.
  217. [ 7.206260] hub 2-0:1.0: USB hub found
  218. [ 7.213838] hub 2-0:1.0: 1 port detected
  219. [ 7.226476] kmodloader: done loading kernel modules from /etc/modules-boot.d/ *
  220. [ 7.253791] init: - preinit -
  221. [ 7.881498] mtk_soc_eth 1e100000.ethernet: PPE started
  222. [ 7.962385] random: procd: uninitialized urandom read (4 bytes read)
  223. [ 11.106434] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 489
  224. [ 11.178936] UBIFS (ubi0:1): recovery needed
  225. [ 11.388407] UBIFS (ubi0:1): recovery completed
  226. [ 11.397388] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root fs_data"
  227. [ 11.412974] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u nit sizes: 2048 bytes/2048 bytes
  228. [ 11.432711] UBIFS (ubi0:1): FS size: 39616512 bytes (37 MiB, 312 LEBs), journ al size 2031616 bytes (1 MiB, 16 LEBs)
  229. [ 11.453485] UBIFS (ubi0:1): reserved for root: 1871185 bytes (1827 KiB)
  230. [ 11.466653] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 04FF2 C51-4E1A-4685-AFFD-293639F3DB97, small LPT model
  231. [ 11.500941] mount_root: switching to ubifs overlay
  232. [ 11.538765] urandom-seed: Seeding with /etc/urandom.seed
  233. [ 11.650373] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x8081 8
  234. [ 11.676484] procd: - early -
  235. [ 11.682313] procd: - watchdog -
  236. [ 12.373619] procd: - watchdog -
  237. [ 12.380211] procd: - ubus -
  238. [ 12.419273] random: ubusd: uninitialized urandom read (4 bytes read)
  239. [ 12.447117] random: ubusd: uninitialized urandom read (4 bytes read)
  240. [ 12.460201] random: ubusd: uninitialized urandom read (4 bytes read)
  241. [ 12.473870] procd: - init -
  242. [ 13.065758] kmodloader: loading kernel modules from /etc/modules.d/*
  243. [ 13.088010] tun: Universal TUN/TAP device driver, 1.6
  244. [ 13.102929] ip6_tables: (C) 2000-2006 Netfilter Core Team
  245. [ 13.120082] Loading modules backported from Linux version v5.3-rc4-0-gd45331b 00ddb
  246. [ 13.126123] urngd: v1.0.0 started.
  247. [ 13.135280] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
  248. [ 13.156855] ip_tables: (C) 2000-2006 Netfilter Core Team
  249. [ 13.174272] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
  250. [ 13.228774] xt_time: kernel timezone is -0000
  251. [ 13.282942] random: crng init done
  252. [ 13.289825] random: 6 urandom warning(s) missed due to ratelimiting
  253. [ 13.295938] bus=0x1, slot = 0x0, irq=0x0
  254. [ 13.301849] PPP generic driver version 2.4.2
  255. [ 13.304721] NET: Registered protocol family 24
  256. [ 13.330003] kmodloader: done loading kernel modules from /etc/modules.d/*
  257. [ 13.344109] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 2018 0518100604a
  258. [ 13.344109]
  259. [ 13.577801] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time : 20190103180756
  260. [ 13.606866] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Tim e: 20181207140436
  261. [ 18.835441] mtk_soc_eth 1e100000.ethernet: PPE started
  262. [ 18.847202] br-lan: port 1(eth0) entered blocking state
  263. [ 18.857677] br-lan: port 1(eth0) entered disabled state
  264. [ 18.868738] device eth0 entered promiscuous mode
  265. [ 18.882189] br-lan: port 1(eth0) entered blocking state
  266. [ 18.892719] br-lan: port 1(eth0) entered forwarding state
  267. [ 18.904002] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  268. [ 18.991335] br-lan: port 2(eth0.1) entered blocking state
  269. [ 19.002158] br-lan: port 2(eth0.1) entered disabled state
  270. [ 19.013796] device eth0.1 entered promiscuous mode
  271. [ 19.024075] br-lan: port 2(eth0.1) entered blocking state
  272. [ 19.034909] br-lan: port 2(eth0.1) entered forwarding state
  273. [ 19.883548] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  274. [ 21.284638] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  275. [ 21.301038] bus=0x2, slot = 0x1, irq=0x0
  276. [ 21.323975] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 2018 0518100604a
  277. [ 21.323975]
  278. [ 21.358055] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time : 20190103180756
  279. [ 21.385457] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Tim e: 20181207140436
  280. [ 29.037784] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!