Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- console is keyboard/display
- Copyright (c) 1982, 1986, 1989, 1991, 1993
- The Regents of the University of California. All rights reserved.
- Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org
- OpenBSD 6.7 (GENERIC.MP) #310: Thu May 7 18:41:00 MDT 2020
- [email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
- real mem = 4294967296 (4096MB)
- avail mem = 4202258432 (4007MB)
- mpath0 at root
- scsibus0 at mpath0: 256 targets
- mainbus0 at root: Sun Ultra 45 Workstation
- cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz
- cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
- cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz
- cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
- "memory-controller" at mainbus0 not configured
- "memory-controller" at mainbus0 not configured
- pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12
- pyro0: dvma map c0000000-ffffffff
- pci0 at pyro0
- ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xaa
- pci1 at ppb0 bus 3
- ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xaa
- pci2 at ppb1 bus 4
- ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
- pci3 at ppb2 bus 5
- ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
- ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
- ohci2 at pci3 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
- ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
- usb0 at ehci0: USB revision 2.0
- uhub0 at usb0 configuration 1 interface 0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
- auacer0 at pci3 dev 29 function 0 "Acer Labs M5455 Audio" rev 0x21: ivec 0x785
- ac97: codec id 0x41445374 (Analog Devices AD1981B)
- ac97: codec features headphone, 20 bit DAC, No 3D Stereo
- audio0 at auacer0
- alipm0 at pci3 dev 30 function 1 "Acer Labs M7101 Power" rev 0x00: can't map i/o space
- pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
- pciide0: using ivec 0x784 for native-PCI interrupt
- atapiscsi0 at pciide0 channel 0 drive 0
- scsibus1 at atapiscsi0: 2 targets
- cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-85JS, F100> removable
- cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
- pciide0: channel 1 disabled (no drives)
- usb1 at ohci0: USB revision 1.0
- uhub1 at usb1 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
- usb2 at ohci1: USB revision 1.0
- uhub2 at usb2 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
- usb3 at ohci2: USB revision 1.0
- uhub3 at usb3 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
- ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xaa
- pci4 at ppb3 bus 6
- ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3
- pci5 at ppb4 bus 7
- bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa2, BCM5715 A1 (0x9001): ivec 0x796, address 00:14:4f:e2:ed:66
- brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
- bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa2, BCM5715 A1 (0x9001): ivec 0x797, address 00:14:4f:e2:ed:67
- brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
- ppb5 at pci1 dev 3 function 0 "PLX PEX 8532" rev 0xaa: msi
- pci6 at ppb5 bus 8
- ppb6 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xaa: msi
- pci7 at ppb6 bus 9
- ppb7 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xaa
- pci8 at ppb7 bus 10
- ppb8 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
- pci9 at ppb8 bus 11
- mpi0 at pci9 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
- mpi0: SAS1064, firmware 1.8.3.0
- scsibus2 at mpi0: 63 targets
- sd0 at scsibus2 targ 0 lun 0: <HITACHI, HUS1514SBSUN146G, SA02> naa.5000cca00510ac34
- sd0: 140009MB, 512 bytes/sector, 286739329 sectors
- ppb9 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
- pci10 at ppb9 bus 12
- radeondrm0 at pci10 dev 1 function 0 "ATI Radeon VE" rev 0x00
- drm0 at radeondrm0
- radeondrm0: ivec 0x78b
- pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 255
- pyro1: dvma map c0000000-ffffffff
- pci11 at pyro1
- ebus0 at mainbus0
- "flashprom" at ebus0 addr 0-1fffff not configured
- rtc0 at ebus0 addr 100000-10000f: bq4802
- com0 at ebus0 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
- com1 at ebus0 addr 0-7 ivec 0x7c8: ns16550a, 16 byte fifo
- "env-monitor" at ebus0 addr 0-41 not configured
- pcfiic0 at ebus0 addr 80-81 ivec 0x7c1
- iic0 at pcfiic0
- "pca9556" at iic0 addr 0x18 not configured
- lmtemp0 at iic0 addr 0x2b: lm76
- lmtemp1 at iic0 addr 0x48: lm76, fails to respond
- lmtemp2 at iic0 addr 0x4f: lm76
- "adt7462" at iic0 addr 0x58 not configured
- power0 at ebus0 addr e0-e1 ivec 0x7c3
- "i2c" at mainbus0 not configured
- "i2c" at mainbus0 not configured
- "ppm" at mainbus0 not configured
- uhub4 at uhub0 port 7 configuration 1 interface 0 "Standard Microsystems Hub" rev 2.00/0.01 addr 2
- uhub5 at uhub1 port 2 configuration 1 interface 0 "Fujitsu Component product 0x100e" rev 2.00/1.05 addr 2
- uhidev0 at uhub5 port 3 configuration 1 interface 0 "Alcor Micro USB Mouse" rev 1.10/51.27 addr 3
- uhidev0: iclass 3/1
- ums0 at uhidev0: 3 buttons, Z dir
- wsmouse0 at ums0 mux 0
- uhidev1 at uhub5 port 4 configuration 1 interface 0 "Fujitsu Component Sun USB Keyboard" rev 2.00/1.05 addr 4
- uhidev1: iclass 3/1
- ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33
- wskbd0 at ukbd0: console keyboard
- vscsi0 at root
- scsibus3 at vscsi0: 256 targets
- softraid0 at root
- scsibus4 at softraid0: 256 targets
- bootpath: /pci@1e,600000/pci@0,0/pci@9,0/pci@0,0/scsi@1,0/disk@0,0
- root on sd0a (f7df07198a170b95.a) swap on sd0b dump on sd0b
- initializing kernel modesetting (RV100 0x1002:0x5159 0x1002:0x0908 0x00).
- BIOS signature incorrect 0 0
- radeondrm0: 1152x900, 8bpp
- wsdisplay0 at radeondrm0 mux 1: console (std, sun emulation), using wskbd0
Add Comment
Please, Sign In to add comment