Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- T #####T ###T #########
- ###T ##############################################################
- #############T ###############################################T ######T
- ###############################################################T ##
- ####################T ###T ##########T ################################
- ################################################T ########T ######T ####
- #######################################T #########T ##################
- #T ####T ###############################T ##########T ###################
- ##################################################T ###############
- #######T #################
- done
- Bytes transferred = 8926240 (883420 hex)
- bootm 0x48000000#config@2## Booting kernel from FIT Image at 48000000 ...
- Using 'config@2' configuration
- Trying 'kernel-1' kernel subimage
- Description: ARM OpenWrt Linux-5.10.135
- Type: Kernel Image
- Compression: gzip compressed
- Data Start: 0x480000e4
- Data Size: 8893221 Bytes = 8.5 MiB
- Architecture: ARM
- OS: Linux
- Load Address: 0x44208000
- Entry Point: 0x44208000
- Hash algo: crc32
- Hash value: 57ed68a4
- Hash algo: sha1
- Hash value: a1c862c82d30f9ed03bae83740a159eb3d73027a
- Verifying Hash Integrity ... crc32+ sha1+ OK
- ## Flattened Device Tree from FIT Image at 48000000
- Using 'config@2' configuration
- Trying 'fdt-1' FDT blob subimage
- Description: ARM OpenWrt meraki_mr52 device tree blob
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0x4887b544
- Data Size: 31136 Bytes = 30.4 KiB
- Architecture: ARM
- Hash algo: crc32
- Hash value: 09680f83
- Hash algo: sha1
- Hash value: d8f2562bdbcf0cd9ba0a49d2ff079df45906d148
- Verifying Hash Integrity ... crc32+ sha1+ OK
- Booting using the fdt blob at 0x4887b544
- Uncompressing Kernel Image ... OK
- Loading Device Tree to 4eaf5000, end 4eaff99f ... OK
- Using machid 0x136b from environment
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 5.10.135 (builder@buildhost) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.3.0 r20263-f443e9de70) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Tue Aug 9 06:08:08 2022
- [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000] OF: fdt: Machine model: Meraki MR52
- [ 0.000000] OF: fdt: Ignoring memory range 0x41500000 - 0x44000000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000044000000-0x000000005fefffff]
- [ 0.000000] HighMem empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000044000000-0x000000005fefffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000044000000-0x000000005fefffff]
- [ 0.000000] percpu: Embedded 15 pages/cpu s31180 r8192 d22068 u61440
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113426
- [ 0.000000] Kernel command line: loader=u-boot part=bootkernel2 console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art
- [ 0.000000] Bootloader command line not present
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 432700K/457728K available (7002K kernel code, 618K rwdata, 1692K rodata, 10240K init, 242K bss, 25028K reserved, 0K cma-reserved, 0K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
- [ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
- [ 0.000026] Switching to timer-based delay loop, resolution 160ns
- [ 0.000355] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
- [ 0.000388] pid_max: default: 32768 minimum: 301
- [ 0.000566] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.000589] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.001670] CPU: Testing write buffer coherency: ok
- [ 0.001989] qcom_scm: convention: smc legacy
- [ 0.003081] Setting up static identity map for 0x44300000 - 0x44300060
- [ 0.003280] rcu: Hierarchical SRCU implementation.
- [ 0.003603] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
- [ 0.003888] smp: Bringing up secondary CPUs ...
- [ 0.005932] smp: Brought up 1 node, 2 CPUs
- [ 0.005955] SMP: Total of 2 processors activated (25.00 BogoMIPS).
- [ 0.005972] CPU: All CPU(s) started in SVC mode.
- [ 0.017100] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
- [ 0.017274] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.017310] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
- [ 0.017458] pinctrl core: initialized pinctrl subsystem
- [ 0.019213] NET: Registered protocol family 16
- [ 0.019586] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.021052] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.023117] cpuidle: using governor ladder
- [ 0.023195] cpuidle: using governor menu
- [ 0.069642] usbcore: registered new interface driver usbfs
- [ 0.069727] usbcore: registered new interface driver hub
- [ 0.069798] usbcore: registered new device driver usb
- [ 0.069864] pps_core: LinuxPPS API ver. 1 registered
- [ 0.069882] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.069921] PTP clock support registered
- [ 0.072183] clocksource: Switched to clocksource dg_timer
- [ 0.073426] NET: Registered protocol family 2
- [ 0.073667] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.074701] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.074836] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
- [ 0.074884] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.074942] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.075049] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.075085] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.075356] NET: Registered protocol family 1
- [ 0.075416] PCI: CLS 0 bytes, default 64
- [ 0.224388] workingset: timestamp_bits=14 max_order=17 bucket_order=3
- [ 0.230121] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.230142] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.334956] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 0.337001] qcom-pcie 1b500000.pci: supply vdda not found, using dummy regulator
- [ 0.337267] qcom-pcie 1b500000.pci: supply vdda_phy not found, using dummy regulator
- [ 0.337391] qcom-pcie 1b500000.pci: supply vdda_refclk not found, using dummy regulator
- [ 0.337681] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
- [ 0.337767] qcom-pcie 1b500000.pci: IO 0x000fe00000..0x000fe0ffff -> 0x000fe00000
- [ 0.337811] qcom-pcie 1b500000.pci: MEM 0x0008000000..0x000fdfffff -> 0x0008000000
- [ 0.559554] qcom-pcie 1b500000.pci: Link up
- [ 0.559734] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
- [ 0.559761] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.559785] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xfe00000-0xfe0ffff])
- [ 0.559811] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
- [ 0.559898] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
- [ 0.560058] pci 0000:00:00.0: supports D1
- [ 0.560079] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 0.564846] PCI: bus0: Fast back to back transfers disabled
- [ 0.565371] pci 0000:01:00.0: [168c:0050] type 00 class 0x028000
- [ 0.565687] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 0.566187] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.567183] pci 0000:01:00.0: supports D1
- [ 0.567204] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
- [ 0.572198] PCI: bus1: Fast back to back transfers disabled
- [ 0.572298] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x082fffff]
- [ 0.572330] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
- [ 0.572573] pci 0000:01:00.0: BAR 6: assigned [mem 0x08200000-0x0820ffff pref]
- [ 0.572600] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 0.572629] pci 0000:00:00.0: bridge window [mem 0x08000000-0x082fffff]
- [ 0.573732] pcieport 0000:00:00.0: AER: enabled with IRQ 44
- [ 0.574738] qcom-pcie 1b700000.pci: supply vdda not found, using dummy regulator
- [ 0.575007] qcom-pcie 1b700000.pci: supply vdda_phy not found, using dummy regulator
- [ 0.575127] qcom-pcie 1b700000.pci: supply vdda_refclk not found, using dummy regulator
- [ 0.575390] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
- [ 0.575474] qcom-pcie 1b700000.pci: IO 0x0031e00000..0x0031e0ffff -> 0x0031e00000
- [ 0.575517] qcom-pcie 1b700000.pci: MEM 0x002e000000..0x0031dfffff -> 0x002e000000
- [ 0.799475] qcom-pcie 1b700000.pci: Link up
- [ 0.799643] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
- [ 0.799669] pci_bus 0001:00: root bus resource [bus 00-ff]
- [ 0.799692] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x31e00000-0x31e0ffff])
- [ 0.799714] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
- [ 0.799788] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
- [ 0.799927] pci 0001:00:00.0: supports D1
- [ 0.799945] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
- [ 0.804453] PCI: bus0: Fast back to back transfers disabled
- [ 0.804966] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
- [ 0.805257] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 0.806628] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
- [ 0.811482] PCI: bus1: Fast back to back transfers disabled
- [ 0.811571] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
- [ 0.811600] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
- [ 0.811751] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
- [ 0.811777] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
- [ 0.812761] pcieport 0001:00:00.0: AER: enabled with IRQ 46
- [ 0.813742] qcom-pcie 1b900000.pci: supply vdda not found, using dummy regulator
- [ 0.813973] qcom-pcie 1b900000.pci: supply vdda_phy not found, using dummy regulator
- [ 0.814105] qcom-pcie 1b900000.pci: supply vdda_refclk not found, using dummy regulator
- [ 0.814379] qcom-pcie 1b900000.pci: host bridge /soc/pci@1b900000 ranges:
- [ 0.814460] qcom-pcie 1b900000.pci: IO 0x0035e00000..0x0035e0ffff -> 0x0035e00000
- [ 0.814502] qcom-pcie 1b900000.pci: MEM 0x0032000000..0x0035dfffff -> 0x0032000000
- [ 1.039492] qcom-pcie 1b900000.pci: Link up
- [ 1.039658] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00
- [ 1.039684] pci_bus 0002:00: root bus resource [bus 00-ff]
- [ 1.039708] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff] (bus address [0x35e00000-0x35e0ffff])
- [ 1.039730] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff]
- [ 1.039808] pci 0002:00:00.0: [17cb:0101] type 01 class 0x060400
- [ 1.039946] pci 0002:00:00.0: supports D1
- [ 1.039964] pci 0002:00:00.0: PME# supported from D0 D1 D3hot
- [ 1.044365] PCI: bus0: Fast back to back transfers disabled
- [ 1.044889] pci 0002:01:00.0: [168c:0046] type 00 class 0x028000
- [ 1.045183] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 1.046557] pci 0002:01:00.0: PME# supported from D0 D3hot D3cold
- [ 1.051272] PCI: bus1: Fast back to back transfers disabled
- [ 1.051362] pci 0002:00:00.0: BAR 8: assigned [mem 0x32000000-0x321fffff]
- [ 1.051389] pci 0002:01:00.0: BAR 0: assigned [mem 0x32000000-0x321fffff 64bit]
- [ 1.051539] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
- [ 1.051565] pci 0002:00:00.0: bridge window [mem 0x32000000-0x321fffff]
- [ 1.052537] pcieport 0002:00:00.0: AER: enabled with IRQ 48
- [ 1.055676] L2 @ QSB rate. Forcing new rate.
- [ 1.055914] L2 @ 384000 KHz
- [ 1.056107] CPU0 @ 800000 KHz
- [ 1.056125] CPU1 @ QSB rate. Forcing new rate.
- [ 1.056259] CPU1 @ 384000 KHz
- [ 1.060558] gsbi 12440000.gsbi: GSBI port protocol: 4 crci: 0
- [ 1.062923] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
- [ 1.064820] gsbi 16600000.gsbi: GSBI port protocol: 2 crci: 0
- [ 1.067255] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 1.069881] msm_serial 12450000.serial: msm_serial: detected port #1
- [ 1.069942] msm_serial 12450000.serial: uartclk = 25000000
- [ 1.070020] 12450000.serial: ttyMSM1 at MMIO 0x12450000 (irq = 49, base_baud = 1562500) is a MSM
- [ 1.070506] msm_serial 16340000.serial: msm_serial: detected port #0
- [ 1.070557] msm_serial 16340000.serial: uartclk = 7372800
- [ 1.070626] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 50, base_baud = 460800) is a MSM
- [ 1.070667] msm_serial: console setup on port #0
- [ 2.104037] printk: console [ttyMSM0] enabled
- [ 2.109154] msm_serial: driver initialized
- [ 2.118594] loop: module loaded
- [ 2.120274] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
- [ 2.120555] nand: AMD/Spansion S34MS01G2
- [ 2.127285] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 2.131218] 13 fixed-partitions partitions found on MTD device qcom_nand.0
- [ 2.138530] Creating 13 MTD partitions on "qcom_nand.0":
- [ 2.145395] 0x000000000000-0x000000040000 : "sbl1"
- [ 2.151828] 0x000000040000-0x000000180000 : "mibib"
- [ 2.158138] 0x000000180000-0x0000002c0000 : "sbl2"
- [ 2.162839] 0x0000002c0000-0x000000540000 : "sbl3"
- [ 2.169728] 0x000000540000-0x000000660000 : "ddrconfig"
- [ 2.172195] 0x000000660000-0x000000780000 : "ssd"
- [ 2.177415] 0x000000780000-0x000000a00000 : "tz"
- [ 2.184619] 0x000000a00000-0x000000c80000 : "rpm"
- [ 2.189405] 0x000001fc0000-0x000002140000 : "u-boot"
- [ 2.192652] 0x0000021c0000-0x000002c40000 : "bootkernel1"
- [ 2.212361] 0x000002c40000-0x0000036c0000 : "bootkernel2"
- [ 2.231232] 0x0000036c0000-0x000007d80000 : "ubi"
- [ 2.350443] 0x000007d80000-0x000007f80000 : "art"
- [ 2.617876] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
- [ 2.617944] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
- [ 2.624865] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_wake_irq not found
- [ 2.630362] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_lpi not found
- [ 2.638431] i2c /dev entries driver
- [ 2.644765] i2c_qup 16680000.i2c: using default clock-frequency 100000
- [ 2.658122] sdhci: Secure Digital Host Controller Interface driver
- [ 2.658176] sdhci: Copyright(c) Pierre Ossman
- [ 2.663315] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.671723] NET: Registered protocol family 10
- [ 2.675644] Segment Routing with IPv6
- [ 2.677713] NET: Registered protocol family 17
- [ 2.681443] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 2.686081] 8021q: 802.1Q VLAN Support v1.8
- [ 2.698961] Registering SWP/SWPB emulation handler
- [ 2.728815] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
- [ 2.742592] s1a: Bringing 0uV into 1050000-1050000uV
- [ 2.742880] s1a: supplied by regulator-dummy
- [ 2.746778] s1b: Bringing 0uV into 1050000-1050000uV
- [ 2.751109] s1b: supplied by regulator-dummy
- [ 2.756056] s2a: Bringing 0uV into 800000-800000uV
- [ 2.760316] s2a: supplied by regulator-dummy
- [ 2.764906] s2b: Bringing 0uV into 800000-800000uV
- [ 2.769344] s2b: supplied by regulator-dummy
- [ 2.774336] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
- [ 2.778142] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
- [ 2.785705] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_wake_irq not found
- [ 2.791509] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_lpi not found
- [ 2.802424] thermal thermal_zone0: failed to read out thermal zone (-110)
- [ 2.818409] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
- [ 2.818447] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
- [ 2.824962] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_wake_irq not found
- [ 2.830877] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_lpi not found
- [ 2.838493] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
- [ 2.844572] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
- [ 2.851987] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_wake_irq not found
- [ 2.858176] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_lpi not found
- [ 2.865663] ubi0: attaching mtd11
- [ 3.020528] random: crng init done
- [ 3.405731] ubi0: scanning is finished
- [ 3.415852] ubi0: attached mtd11 (name "ubi", size 70 MiB)
- [ 3.415877] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 3.420225] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 3.427156] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 3.433998] ubi0: good PEBs: 566, bad PEBs: 0, corrupted PEBs: 0
- [ 3.440711] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
- [ 3.447028] ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 1338979908
- [ 3.454047] ubi0: available PEBs: 141, total reserved PEBs: 425, PEBs reserved for bad PEB handling: 20
- [ 3.463378] ubi1: attaching mtd12
- [ 3.463468] ubi0: background thread "ubi_bgt0d" started, PID 89
- [ 3.472390] ubi1: MTD device 12 is write-protected, attach in read-only mode
- [ 3.487913] ubi1: scanning is finished
- [ 3.498244] ubi1 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 2, need 20
- [ 3.498690] ubi1: attached mtd12 (name "art", size 2 MiB)
- [ 3.507209] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 3.512504] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 3.519198] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 3.526138] ubi1: good PEBs: 16, bad PEBs: 0, corrupted PEBs: 0
- [ 3.532908] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
- [ 3.538731] ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 438719976
- [ 3.546136] ubi1: available PEBs: 0, total reserved PEBs: 16, PEBs reserved for bad PEB handlin[ 3.593301] Freeing unused kernel memory: 10240K
- [ 3.593696] Run /init as init process
- [ 3.907398] init: Console is alive
- [ 3.907569] init: - watchdog -
- [ 3.928438] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 3.931741] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 52
- [ 3.935159] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
- [ 3.941685] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
- [ 3.943250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.949181] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_wake_irq not found
- [ 3.959734] SCSI subsystem initialized
- [ 3.961649] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_lpi not found
- [ 3.979459] ehci-fsl: Freescale EHCI Host controller driver
- [ 3.980355] ehci-platform: EHCI generic platform driver
- [ 3.988451] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
- [ 3.989753] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
- [ 3.998080] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.003658] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_wake_irq not found
- [ 4.009567] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_lpi not found
- [ 4.017768] ohci-platform: OHCI generic platform driver
- [ 4.035029] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
- [ 4.035073] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
- [ 4.041554] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_wake_irq not found
- [ 4.048236] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_lpi not found
- [ 4.055224] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 4.066070] init: - preinit -
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- [ 6.442418] procd: - early -
- [ 6.442698] procd: - watchdog -
- [ 6.988980] procd: - watchdog -
- [ 6.989802] procd: - ubus -
- [ 7.050421] procd: - init -
- Please press Enter to activate this console.
- [ 7.272300] urngd: v1.0.2 started.
- [ 7.300046] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 7.304377] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
- [ 7.305464] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
- [ 7.380678] PPP generic driver version 2.4.2
- [ 7.384830] NET: Registered protocol family 24
- [ 7.405768] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x50.
- [ 7.406638] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
- [ 7.413365] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 8.609738] ath10k_pci 0000:01:00.0: Failed to find firmware-N.bin (N between 2 and 6) from ath10k/QCA9887/hw1.0: -12
- [ 8.609779] ath10k_pci 0000:01:00.0: could not fetch firmware files (-12)
- [ 8.619429] ath10k_pci 0000:01:00.0: could not probe fw (-12)
- [ 8.626516] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x46.
- [ 8.632138] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
- [ 8.639719] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
- [ 8.647193] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_wake_irq not found
- [ 8.653083] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_lpi not found
- [ 8.660452] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
- [ 8.667501] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 9.818898] ath10k_pci 0001:01:00.0: Failed to find firmware-N.bin (N between 2 and 6) from ath10k/QCA9984/hw1.0: -12
- [ 9.818946] ath10k_pci 0001:01:00.0: could not fetch firmware files (-12)
- [ 9.828621] ath10k_pci 0001:01:00.0: could not probe fw (-12)
- [ 9.835873] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x46.
- [ 9.841761] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
- [ 9.848918] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
- [ 9.852989] ath10k_pci 0002:01:00.0: enabling device (0140 -> 0142)
- [ 9.862696] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_wake_irq not found
- [ 9.862963] ath10k_pci 0002:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 9.868428] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_lpi not found
- [ 10.966695] ath10k_pci 0002:01:00.0: Failed to find firmware-N.bin (N between 2 and 6) from ath10k/QCA9984/hw1.0: -12
- [ 10.966750] ath10k_pci 0002:01:00.0: could not fetch firmware files (-12)
- [ 10.976418] ath10k_pci 0002:01:00.0: could not probe fw (-12)
- [ 10.988647] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 10.989977] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
- [ 10.995656] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
- [ 11.006059] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_wake_irq not found
- [ 11.009022] ipq806x-gmac-dwmac 37600000.ethernet: IRQ eth_lpi not found
- BusyBox v1.35.0 (2022-08-09 06:08:08 UTC) built-in shell (ash)
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- OpenWrt SNAPSHOT, r20263-f443e9de70
- -----------------------------------------------------
- === WARNING! =====================================
- There is no root password defined on this device!
- Use the "passwd" command to set up a new password
- in order to prevent unauthorized SSH logins.
- --------------------------------------------------
- root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement