Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00066
S - IMAGE_VARIANT_STRING=MAACANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002c5
B -       126 - PBL, Start
B -      1557 - bootable_media_detect_entry, Start
B -      3347 - bootable_media_detect_success, Start
B -      3350 - elf_loader_entry, Start
B -      8418 - auth_hash_seg_entry, Start
B -      8778 - auth_hash_seg_exit, Start
B -    100136 - elf_segs_hash_verify_entry, Start
B -    169734 - PBL, End
B -    139629 - SBL1, Start
B -    201025 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4
B -    209169 - clock_init, Start
D -      7259 - clock_init, Delta
B -    216580 - boot_flash_init, Start
D -     14945 - boot_flash_init, Delta
B -    231617 - boot_config_data_table_init, Start
D -      4666 - boot_config_data_table_init, Delta - (575 Bytes)
B -    239333 - Boot Setting :  0x00000618
B -    245708 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:1
B -    252448 - sbl1_ddr_set_params, Start
B -    253882 - Pre_DDR_clock_init, Start
B -    259707 - Pre_DDR_clock_init, End
B -    901946 - do ddr sanity test, Start
D -        61 - do ddr sanity test, Delta
B -    906612 - Image Load, Start
D -    242872 - QSEE Image Loaded, Delta - (578956 Bytes)
B -   1150338 - Image Load, Start
D -     13847 - DEVCFG Image Loaded, Delta - (13592 Bytes)
B -   1164246 - Image Load, Start
D -    196023 - APPSBL Image Loaded, Delta - (470282 Bytes)
B -   1360330 - QSEE Execution, Start
D -        61 - QSEE Execution, Delta
B -   1366796 - SBL1, End
D -   1229821 - SBL1, Delta
S - Flash Throughput, 2457 KB/s  (1064077 Bytes,  433002 us)
S - DDR Frequency, 800 MHz
S - Core 0 Frequency, 800 MHz

U-Boot 2016.01 (Mar 19 2025 - 18:39:12 +0800)

DRAM:  smem ram ptable found: ver: 1 len: 4
512 MiB
NAND:  QPIC controller support serial NAND
ID = 7f7f11c8
Vendor = c8
Device = 11
Serial Nand Device Found With ID : 0xc8 0x11
Serial NAND device Manufacturer:F50D1G41LB(2M)
Device Size:128 MiB, Page size:2048, Spare Size:64, ECC:4-bit
SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
128 MiB
MMC:   sdhci: Node Not found, skipping initialization

PCI Link Intialized
PCI1 is not defined in the device tree
In:    serial@78AF000
Out:   serial@78AF000
Err:   serial@78AF000
machid: 8040001
Reset button GPIO: 22
Web LED GPIO: 1
###### PULL UP GPIO31 for MODEM POWER UP
Hit any key to stop autoboot:  5  0

Net:   cmbblk is stable 5
MAC0 addr:XX:XX:XX:XX:XX:XX
PHY ID1: 0x4d
PHY ID2: 0xd0c0
MAC1 addr:XX:XX:XX:XX:XX:XX
athrs17_reg_init: complete
athrs17_vlan_config …done
S17c init  done
board_update_caldata: Unable to find slot-Id, Default CapIn/CapOut values used
eth0, eth1
IPQ5018# printenv

baudrate=115200
bootargs=xu_whitelabel=XU xu_hwlbl=R5Q-D50-1G-DB4-EM console=ttyMSM0,115200n8
bootcmd=bootipq
bootdelay=5
eth1addr=XX:XX:XX:XX:XX:XX
ethact=eth0
ethaddr=XX:XX:XX:XX:XX:XX
fdt_high=0x4A400000
fdtcontroladdr=4a9d4004
flash_type=11
ipaddr=192.168.1.1
machid=8040001
netmask=255.255.255.0
serverip=192.168.1.2
soc_hw_version=20180101
soc_version_major=1
soc_version_minor=1
stderr=serial@78AF000
stdin=serial@78AF000
stdout=serial@78AF000
xu_hwlbl=R5Q-D50-1G-DB4-EM
xu_whitelabel=XU

Environment size: 540/262140 bytes
IPQ5018#