Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- F0: 102B 0000
- FA: 1040 0000
- FA: 1040 0000 [0200]
- F9: 0000 0000
- V0: 0000 0000 [0001]
- 00: 0000 0000
- BP: 2400 0041 [0000]
- G0: 1190 0000
- EC: 0000 0000 [1000]
- T0: 0000 0142 [010F]
- Jump to BL
- NOTICE: BL2: v2.6(release):220705_xdr6088mtv1-canoe_r17-dirty
- NOTICE: BL2: Built : 07:05:56, Jul 4 2022
- NOTICE: WDT: disabled
- rtl8221 reset pull down by gpio13
- rtl8221 reset pull down by gpio17
- NOTICE: EMI: Using DDR3 settings
- NOTICE: EMI: Detected DRAM size: 512MB
- NOTICE: EMI: complex R/W mem test passed
- NOTICE: SPI_NAND parses attributes from parameter page.
- NOTICE: SPI_NAND Detected ID 0x35
- NOTICE: Page size 2048, Block size 131072, size 134217728
- NOTICE: BL2: Booting BL31
- NOTICE: BL31: v2.6(release):220705_xdr6088mtv1-canoe_r17-dirty
- NOTICE: BL31: Built : 07:05:56, Jul 4 2022
- U-Boot 2022.04-rc1 (Jul 04 2022 - 07:05:56 +0000)
- CPU: MediaTek MT7986
- Model: mt7986-rfb
- DRAM: 512 MiB
- Core: 42 devices, 15 uclasses, devicetree: embed
- MMC: mmc@11230000: 0
- Loading Environment from MTD... spi-nand: spi_nand spi_nand@1: GigaDevice SPI NAND was found.
- spi-nand: spi_nand spi_nand@1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
- *** Warning - bad CRC, using default environment
- In: serial@11002000
- Out: serial@11002000
- Err: serial@11002000
- Use slp to stop autoboot: 500ms
- 'spi-nand0' is now active device
- Reading from 0x4c0000 to 0x4c00cf, size 0xd0 ...
- Succeeded
- verifying partition...
- Reading from 0x3c0000 to 0x3fffff, size 0x40000 ...
- Succeeded
- ok
- verifying partition...
- Reading from 0x520000 to 0xb9ffff, size 0x680000 ...
- Succeeded
- Reading from 0xc60000 to 0x445ffff, size 0x3800000 ...
- Succeeded
- ok
- Reading from 0x4c0000 to 0x4dffff, size 0x20000 ...
- Succeeded
- Reading from 0x3c0000 to 0x3fffff, size 0x40000 ...
- Succeeded
- boot image at 41000000
- U-Boot 2022.04-rc1 (Jul 04 2022 - 07:05:56 +0000)
- CPU: MediaTek MT7986
- Model: mt7986-rfb
- DRAM: 512 MiB
- Core: 42 devices, 15 uclasses, devicetree: embed
- MMC: mmc@11230000: 0
- Loading Environment from MTD... spi-nand: spi_nand spi_nand@1: GigaDevice SPI NAND was found.
- spi-nand: spi_nand spi_nand@1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
- *** Warning - bad CRC, using default environment
- In: serial@11002000
- Out: serial@11002000
- Err: serial@11002000
- 'spi-nand0' is now active device
- Reading from 0x4c0000 to 0x4dffff, size 0x20000 ...
- Succeeded
- Reading from 0x520000 to 0xc1ffff, size 0x700000 ...
- Succeeded
- ## Loading kernel from FIT Image at 46000000 ...
- Using 'config-1' configuration
- Trying 'kernel-1' kernel subimage
- Description: ARM64 OpenWrt Linux-5.4.168
- Type: Kernel Image
- Compression: lzma compressed
- Data Start: 0x460000e8
- Data Size: 4447404 Bytes = 4.2 MiB
- Architecture: AArch64
- OS: Linux
- Load Address: 0x44080000
- Entry Point: 0x44080000
- Hash algo: crc32
- Hash value: c34bda4d
- Hash algo: sha1
- Hash value: 9bbdeadb4f276b60a5b277f1f1c8b09e0e02d3f9
- ## Loading fdt from FIT Image at 46000000 ...
- Using 'config-1' configuration
- Trying 'fdt-1' fdt subimage
- Description: ARM64 OpenWrt xdr6086mtv1 device tree blob
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0x4643ded0
- Data Size: 21160 Bytes = 20.7 KiB
- Architecture: AArch64
- Hash algo: crc32
- Hash value: 84ef023b
- Hash algo: sha1
- Hash value: 707dca22fb85c0f7de179ddae4c73968f9b5c2ef
- Booting using the fdt blob at 0x4643ded0
- Uncompressing Kernel Image
- Loading Device Tree to 000000005f7f0000, end 000000005f7f82a7 ... OK
- Starting kernel ...
- - preinit -
- - regular preinit -
- switching to jffs2
- - init -
- Please press Enter to activate this console. /etc/rc.common: line 104: config_load: not found
- /etc/rc.common: line 104: config_foreach: not found
- /etc/rc.common: line 104: config_foreach: not found
- /etc/rc.common: line 104: config_foreach: not found
- /etc/rc.common: line 87: config_load: not found
- /etc/rc.common: line 87: config_get: not found
- grep: /tmp/nas_data: No such file or directory
- grep: /tmp/nas_data: No such file or directory
- grep: /tmp/nas_data: No such file or directory
- grep: /tmp/nas_data: No such file or directory
- grep: /tmp/nas_data: No such file or directory
- sh: out of range
- sh: out of range
- mcbAlignFromPool(235). Fail to alloc 552000 bytes from mcb Generic, alloc from heap [<0x7f833c7020>].
- mcbAlignFromPool(235). Fail to alloc 883200 bytes from mcb Generic, alloc from heap [<0x7f83376020>].
- mcbAlignFromPool(235). Fail to alloc 1214400 bytes from mcb Generic, alloc from heap [<0x7f83325020>].
- grep: /tmp/nas_data: No such file or directory
- sh: out of range
- /etc/rc.common: .: line 6: can't open '/lib/pppox/pppox-default-variables.sh'
- /etc/rc.common: line 87: config_load: not found
- /etc/rc.common: line 87: config_get: not found
- <ucconv> usrconfPathPrepare(38). /tmp/etc/config doesn't exit, Now create it.
- systemLoadSysmode(753). get workform 0
- systemLoadSysmode(761). get mngt_mode 3, work_mode 0, controller_detect_mode 0
- initGmacPortInfo(304). gmac0 include port0, support switch
- initGmacPortInfo(304). gmac0 include port1, support switch
- initGmacPortInfo(304). gmac0 include port2, support switch
- initGmacPortInfo(304). gmac0 include port3, support switch
- initGmacPortInfo(304). gmac0 include port4, support switch
- initGmacPortInfo(304). gmac1 include port5, no support switch
- ### dhcp event command register. ###
- ### dhcpv6 event command register. ###
- checkOrResetFactoryInfo(988). Factory Info verified
- statsService init
- .[relay_mode_config_notify:42] sysModeGetWorkMode: 4
- [relay_mode_config_notify:42] sysModeGetWorkMode: 4
- [wanPortDetectCheckAllLan:113] sysModeGetWorkMode: 4
- deviceInfoInit(975). softver:1.0.5 Build 220809 Rel.49402
- [wireless]priv_cmd_table_get[208]invalid priv cmd table
- [wireless]driver_if_init[289]error code is: -1
- [wireless]driver_if_init[290]get iwpriv cmd table failed!
- ioctl[iwpriv ra0 set setMacAddr=F4:84:8D:6D:2C:31] failed Network is down
- ioctl[iwpriv rax0 set setMacAddr=F4:84:8D:6D:2C:33] failed No such device
- br_scan_ifaces(47). Scanning bridge netif...
- topology_init_self_device(4554). init mesh group id: [00:00:00:00:00:00]
- autoconf_business_init(2064). init wlan_dev_num:0
- autoconf_business_init(2064). init wlan_dev_num:1
- init wss module.
- event_sock_enable(1195). enabled netlink socket at 23 with own pid 1361
- jsonObjectToFile(290). Trying to commit to flash...
- portManageLoadConfigToDevWithMode(4854). load config to dev f4:84:8d:6d:2c:31
- loadIptvConfigToDev(3561). cap sub func 3c
- loadIptvConfigToDev(3568). load iptv to dev f4:84:8d:6d:2c:31
- [portManageInit:6273] sysModeGetWorkMode: 4
- optimizeOneFile(1054). Rules Optimized: 619
- optimizeOneFile(1055). Rules Unoptimized: 43
- [<cloud_relay_client/dms>:<cloud_relay_client/iccCtl()/465>] local->1/1024, cmd 0x40004926, sendlen 4, iccctl_ret 0
- [<cloud_relay_client/dms>:<cloud_relay_client/iccCtl()/465>] local->1/1024, cmd 0x40004921, sendlen 16, iccctl_ret 0
- lanv6LocalIpv6: ::
- system_set_if_ip_v6: add ip:fd00:f484:8d6d:2c31:f684:8dff:fe6d:2c31/64 to if:br-lan
- dnsProxyParamInit(196). priDnsStr = 223.6.6.6,223.6.6.6, sndDnsStr = 0.0.0.0,0.0.0.0
- dnsProxyParamInit(238). priDns6Str = 240c::6666,240c::6666, sndDns6Str = ::,::
- dnsProxyParamInit(196). priDnsStr = 223.6.6.6,223.6.6.6, sndDnsStr = 0.0.0.0,0.0.0.0
- dnsProxyParamInit(238). priDns6Str = 240c::6666,240c::6666, sndDns6Str = ::,::
- [lanDhcpcInit:1676] sysModeGetWorkMode: 4
- [dhcpsParamsUpdate:1328] sysModeGetWorkMode: 4
- 1
- 2
- 1
- 2
- firewallCtxInit(560). /network/wan_status/wan_status
- firewallCtxInit(560). /network/wan_status_2/wan_status_2
- updateChainInputIcmpToWanIf(222). enter icmp to wanif
- ip6tables: No chain/target/match by that name.
- <WARN> ipt cmd failed: ip6tables -w -t filter -F INPUT_VPN, 256
- ip6tables: No chain/target/match by that name.
- <WARN> ipt cmd failed: ip6tables -w -t filter -F FORWARD_VPN, 256
- ip6tables: No chain/target/match by that name.
- <WARN> ipt cmd failed: ip6tables -w -t nat -F POSTROUTING_VPN, 256
- statsService start.
- ===============DHCP_TIMEOUT=30
- [wanStartIndex:4850] sysModeGetWorkMode: 4
- [wanPortDetectCheckAllLan:113] sysModeGetWorkMode: 4
- [miniUPnPStart:831] sysModeGetWorkMode: 4
- [upnpdStart:1448] sysModeGetWorkMode: 4
- ioctl[iwpriv ra0 set Workform=0] failed Invalid argument
- ioctl[iwpriv rax0 set Workform=0] failed Invalid argument
- [wireless]wlan_ioctl_set_allow_probereq_event[2635]wlan_ioctl_set_allow_probereq_event not implemented in mtk!!
- [wireless]wlan_ioctl_set_allow_probereq_event[2635]wlan_ioctl_set_allow_probereq_event not implemented in mtk!!
- ioctl[iwpriv ra0 set SetAlmac=F4:84:8D:6D:2C:31] failed Invalid argument
- [wireless]ioctlCmdSetAlmac[1052]Set almac f4:84:8d:6d:2c:31
- ioctl[iwpriv rax0 set SetAlmac=F4:84:8D:6D:2C:31] failed Invalid argument
- [wireless]ioctlCmdSetAlmac[1052]Set almac f4:84:8d:6d:2c:31
- [wireless]ioctl_wlanSetMapdRole[1082]map_role:0
- cloudNmsModuleConfigVersionInit(4384). Read Module:wireless SubModule:wlan_host_2g version failed!
- cloudNmsModuleConfigVersionInit(4384). Read Module:wireless SubModule:wlan_host_5g version failed!
- cloudNmsModuleConfigVersionInit(4384). Read Module:wireless SubModule:wlan_bs version failed!
- mesh_set_cap_info(139). set wan status 0, CAP AL MAC 00:00:00:00:00:00
- netif_port_update_handle(962). all set 1905 enable
- ps_app_init 2074 Path selection app init...
- Init User_Flush_Fcache
- [error] WRITE FILE ERRORwxx maxDownloadSpeed 0, maxUploadSpeed 0
- rmmod: can't unload 'br_guest_filter': unknown symbol in module, or unknown parameter
- [wdsSetConfigRouter:658] sysModeGetWorkMode: 4
- [wdsSetConfigRouter:658] sysModeGetWorkMode: 4
- [wiredExtStart:686] sysModeGetWorkMode: 4
- -->[ERROR]packetHandler | 778 - LLDP select error!!!
- taskCheckPending(359). TASK cloudBrd finished pending and continue.
- taskCheckPending(359). TASK tWlanTask finished pending and continue.
- taskBootupPending(350). TASK timerMgt finished pending and continue.
- taskCheckPending(359). TASK inetd finished pending and continue.
- taskCheckPending(359). TASK monitor finished pending and continue.
- [cloudLinkHandleIfname:215] sysModeGetWorkMode: 4
- [cloudLinkHandleDnsServerIp:171] sysModeGetWorkMode: 4
- station_disassociate_all_event_callback(1920). <ERROR> cannot find ra0 in topology db
- station_disassociate_all_event_callback(1920). <ERROR> cannot find ra0 in topology db
- station_disassociate_all_event_callback(1920). <ERROR> cannot find ra1 in topology db
- station_disassociate_all_event_callback(1920). <ERROR> cannot find ra1 in topology db
- station_disassociate_all_event_callback(1920). <ERROR> cannot find ra7 in topology db
- role_switch_handle_wan_detect_event(522). detect wan status 0, self_wan_status 0, cap_wan_status 0
- role_switch_handle_wan_detect_event(529). detect wan status: port[-1] internet[0] state[0]
- station_disassociate_all_event_callback(1920). <ERROR> cannot find ra7 in topology db
- ioctl[iwpriv ra0 set Channel=0] failed Invalid argument
- ioctl[iwpriv ra0 set BeaconPeriod=0] failed Invalid argument
- station_disassociate_all_event_callback(1920). <ERROR> cannot find ra0 in topology db
- ioctl[iwpriv ra0 set DtimPeriod=0] failed Invalid argument
- station_disassociate_all_event_callback(1920). <ERROR> cannot find ra0 in topology db
- system_bridge_delif(890). Sys del bridge if failed:Invalid argument
- station_disassociate_all_event_callback(1920). <ERROR> cannot find ra1 in topology db
- ioctl[iwpriv ra1 set DtimPeriod=0] failed Invalid argument
- station_disassociate_all_event_callback(1920). <ERROR> cannot find ra7 in topology db
- ioctl[iwpriv ra7 set DtimPeriod=0] failed Invalid argument
- station_disassociate_all_event_callback(1920). <ERROR> cannot find ra7 in topology db
- station_disassociate_all_event_callback(1920). <ERROR> cannot find rax0 in topology db
- station_disassociate_all_event_callback(1920). <ERROR> cannot find rax0 in topology db
- station_disassociate_all_event_callback(1920). <ERROR> cannot find rax7 in topology db
- station_disassociate_all_event_callback(1920). <ERROR> cannot find rax7 in topology db
- ioctl[iwpriv rax0 set Channel=0] failed Invalid argument
- ioctl[iwpriv rax0 set BeaconPeriod=0] failed Invalid argument
- station_disassociate_all_event_callback(1920). <ERROR> cannot find rax0 in topology db
- ioctl[iwpriv rax0 set DtimPeriod=0] failed Invalid argument
- ioctl[iwpriv rax0 set MgntFrameRate=0] failed Invalid argument
- station_disassociate_all_event_callback(1920). <ERROR> cannot find rax0 in topology db
- station_disassociate_all_event_callback(1920). <ERROR> cannot find rax7 in topology db
- ioctl[iwpriv rax7 set DtimPeriod=0] failed Invalid argument
- ioctl[iwpriv rax7 set MgntFrameRate=0] failed Invalid argument
- station_disassociate_all_event_callback(1920). <ERROR> cannot find rax7 in topology db
- [wireless]wlan_ioctl_set_allow_probereq_event[2635]wlan_ioctl_set_allow_probereq_event not implemented in mtk!!
- [wireless]wlan_ioctl_set_allow_probereq_event[2635]wlan_ioctl_set_allow_probereq_event not implemented in mtk!!
- fsLoadFinishCallback(132). JFFS LOAD: Exec file migration.
- ctrlLoadFinishCallback(1160). Exec smp.sh.
- br_scan_ifaces(47). Scanning bridge netif...
- topology_update_local_iface(4338). == Iface vir-eth0.1 already exist...
- topology_update_local_iface(4338). == Iface vir-eth0.2 already exist...
- topology_update_local_iface(4338). == Iface vir-eth0.3 already exist...
- topology_update_local_iface(4338). == Ifac[ 33.601232] 7986@C08L1ra7,UpdateBeaconHandler() 2060: wdev(1) bss not ready (state:0, caller:meshImple_UpdateFhBeacon+0x74/0xa0 [mt7986b])!!
- e vir-eth0.4 alr[ 33.614423] [MESH]set almac to f4:84:8d:6d:2c:31
- eady exist...
- topology_update_local_iface(4338). == Iface vir-eth0.5 already exist...
- topology_update_local_iface(4338). == Iface vir-eth1 already exist...
- topology_update_local_iface(4342). ++ Iface bond0 add to self device...
- topology_update_local_iface(4332). ** Iface ra5 with zero mac ignored...
- topology_update_local_iface(4332). ** Iface ra3 with zero mac ignored...
- topology_update_local_iface(4332). ** Iface ra2 with zero mac ignored...
- topology_update_local_iface(4332). ** Iface ra4 with zero mac ignored...
- topology_update_local_iface(4332). ** Iface rax3 with zero mac ignored...
- topology_update_local_iface(4342). ++ Iface rax7 add to self device...
- topology_update_local_iface(4342). ++ Iface ra7 add to self device...
- topology_update_local_iface(4332). ** Iface rax2 with zero mac ignored...
- topology_update_local_iface(4332). ** Iface ra6 with zero mac ignored...
- topology_update_local_iface(4332). ** Iface rax4 with zero mac ignored...
- topology_update_local_iface(4342). ++ Iface apcli0 add to self device...
- topology_update_local_iface(4342). ++ Iface apclix0 add to self device...
- topology_update_local_iface(4342). ++ Iface rax0 add to self device...
- topology_update_local_iface(4332). ** Iface rax6 with zero mac ignored...
- topology_update_local_iface(4342). ++ Iface ra1 add to self device...
- topology_update_local_iface(4332). ** Iface rax5 with zero mac ignored...
- topology_update_local_iface(4332). ** Iface rax1 with zero mac ignored...
- topology_update_local_iface(4342). ++ Iface ra0 add to self device...
- mwifi_channel_update_handle(755). MWi-Fi Channel update handle: radio band:0 channel switch from channel:0 to 1
- mwifi_channel_update_handle(755). MWi-Fi Channel update handle: radio band:1 channel switch from channel:0 to 40
- mesh_allow_ext_on_band(2136). [mapd] allow RE with almac f4:84:8d:6d:2c:31 to access band 0
- mesh_allow_ext_on_band(2136). [mapd] allow RE with almac f4:84:8d:6d:2c:31 to access band 1
- STEER Config(valid 1):
- enable: 1
- ssid[2G] : TP-LINK_2C31
- ssid[5G] : TP-LINK_2C31
- topology status: StandAlone
- Module:
- enable: 1
- chan_util_interval: 30
- chan_util_samples: 6
- chan_util_overload_2g: 70
- chan_util_overload_5g: 90
- rssi_5g_prefer_2g: 42
- rssi_5g_prefer_5g: 12
- rssi_low_2g: 0
- rssi_high_2g: 35
- rssi_high_2g_direct_btm: 42
- rssi_low_5g_direct_btm: 8
- rssi_low_5g: 8
- rssi_high_5g: 255
- rate_low_2g: 10
- rate_high_2g: 20
- rate_low_5g: 70
- rate_high_5g: 100
- timeout_bcnrpt: 2
- retry_bcnrpt: 1
- timeout_btm: 1
- retry_btm: 5
- phyrate_scaling_2g: 70
- phyrate_scaling_5g: 70
- band_hide_enable: 1
- band_hide_rssi_2g: 255
- band_hide_rssi_5g: 20
- Presteer:
- enable: 1
- auth_rej_max: 2
- timeout: 15
- blackout: 600
- assoc_thres: 0
- diff_thres: 0
- Poststeer:
- enable: 1
- node_inact_interval: 10
- blackout_legacy: 600
- blackout_btm: 60
- timeout_idle_legacy: 15
- auth_rej_max: 2
- APsteer:
- enable: 1
- auth_rej_max: 2
- timeout_notify: 2
- retry_notify: 5
- timeout_requested: 60
- aps_remote_timeout: 10
- blackout: 60
- rssi_low_2g_first: 30
- rssi_low_2g_second: 20
- rssi_low_2g_third: 10
- rssi_low_5g_first: 25
- rssi_low_5g_second: 15
- rssi_low_5g_third: 8
- Offload:
- enable: 1
- blackout: 60
- cap_primary_band: 1
- re_primary_band: 1
- trigger_delta_num: 5
- trigger_interval: 1
- start wss module.
- Start wlan smart steer as g_wss_topology_status 0 Standalone.
- Start wlan smart steer as g_wss_topology_status 0 Standalone.
- _wlan_ioctl_set_bs_enable enable ra0
- _wlan_ioctl_set_bs_enable enable rax0
- onboarding_ioctl_priv_ext(154). ioctl[ra7:0x88A9] request failed Invalid argument.
- mwifi_wlan_ready_event_handle(576). MWi-Fi start at wlan ready
- Recieved dup pkt siwtch
- Dup pkt switch off
- Recieved dup pkt siwtch
- role_selection_wlan_ready_handle(742). [role selection] no need to scan better ap for RE/unpaired device, return
- [cloudLinkHandleIfname:215] sysModeGetWorkMode: 4
- [cloudLinkHandleDnsServerIp:171] sysModeGetWorkMode: 4
- pair_probe_start(2053). start factory RE scan!!!
- lan_business_handle_wan_detect_result(2441). [lan business] Get wan status: port[-1] internet[0] state[0]
- role_switch_handle_wan_detect_event(522). detect wan status 0, self_wan_status 0, cap_wan_status 0
- role_switch_handle_wan_detect_event(529). detect wan status: port[-1] internet[0] state[0]
- [cloudLinkHandleIfname:215] sysModeGetWorkMode: 4
- [cloudLinkHandleDnsServerIp:171] sysModeGetWorkMode: 4
- [cloudLinkHandleIfname:215] sysModeGetWorkMode: 4
- [cloudLinkHandleDnsServerIp:171] sysModeGetWorkMode: 4
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement