Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 3.0.31+ (udknight@gmail.com) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #4 SMP Tue May 8 17:51:09 HKT 2012
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
- [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000007b27c000 (usable)
- [ 0.000000] BIOS-e820: 000000007b27c000 - 000000007b282000 (reserved)
- [ 0.000000] BIOS-e820: 000000007b282000 - 000000007b3e4000 (usable)
- [ 0.000000] BIOS-e820: 000000007b3e4000 - 000000007b40f000 (reserved)
- [ 0.000000] BIOS-e820: 000000007b40f000 - 000000007b46f000 (usable)
- [ 0.000000] BIOS-e820: 000000007b46f000 - 000000007b470000 (reserved)
- [ 0.000000] BIOS-e820: 000000007b470000 - 000000007b4f1000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000007b4f1000 - 000000007b70f000 (reserved)
- [ 0.000000] BIOS-e820: 000000007b70f000 - 000000007b717000 (usable)
- [ 0.000000] BIOS-e820: 000000007b717000 - 000000007b71f000 (reserved)
- [ 0.000000] BIOS-e820: 000000007b71f000 - 000000007b77d000 (usable)
- [ 0.000000] BIOS-e820: 000000007b77d000 - 000000007b79f000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000007b79f000 - 000000007b7df000 (usable)
- [ 0.000000] BIOS-e820: 000000007b7df000 - 000000007b7ff000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000007b7ff000 - 000000007b800000 (usable)
- [ 0.000000] BIOS-e820: 000000007b800000 - 000000007c000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f060a000 - 00000000f060b000 (reserved)
- [ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI present.
- [ 0.000000] DMI: Acer Aspire 4741 /Aspire 4741 , BIOS V1.04 03/02/2010
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0x7b800 max_arch_pfn = 0x1000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-D3FFF write-protect
- [ 0.000000] D4000-DBFFF uncachable
- [ 0.000000] DC000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 disabled
- [ 0.000000] 1 base 07C000000 mask FFC000000 uncachable
- [ 0.000000] 2 base 000000000 mask F80000000 write-back
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [c00f6b40] f6b40
- [ 0.000000] initial memory mapped : 0 - 01c00000
- [ 0.000000] Base memory trampoline at [c0098000] 98000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
- [ 0.000000] 0000000000 - 0000200000 page 4k
- [ 0.000000] 0000200000 - 0037a00000 page 2M
- [ 0.000000] 0037a00000 - 0037bfe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1bfb000-1c00000
- [ 0.000000] RAMDISK: 378f1000 - 37ff0000
- [ 0.000000] Allocated new RAMDISK: 371f2000 - 378f0e31
- [ 0.000000] Move RAMDISK from 00000000378f1000 - 0000000037fefe30 to 371f2000 - 378f0e30
- [ 0.000000] 1084MB HIGHMEM available.
- [ 0.000000] 891MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 37bfe000
- [ 0.000000] low ram: 0 - 37bfe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x00037bfe
- [ 0.000000] HighMem 0x00037bfe -> 0x0007b800
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[8] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009c
- [ 0.000000] 0: 0x00000100 -> 0x0007b27c
- [ 0.000000] 0: 0x0007b282 -> 0x0007b3e4
- [ 0.000000] 0: 0x0007b40f -> 0x0007b46f
- [ 0.000000] 0: 0x0007b70f -> 0x0007b717
- [ 0.000000] 0: 0x0007b71f -> 0x0007b77d
- [ 0.000000] 0: 0x0007b79f -> 0x0007b7df
- [ 0.000000] 0: 0x0007b7ff -> 0x0007b800
- [ 0.000000] On node 0 totalpages: 504945
- [ 0.000000] free_area_init_node: node 0, pgdat c1599080, node_mem_map f6282200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3948 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1752 pages used for memmap
- [ 0.000000] Normal zone: 222502 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2169 pages used for memmap
- [ 0.000000] HighMem zone: 274542 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] Intel MultiProcessor Specification v1.4
- [ 0.000000] Virtual Wire compatibility mode.
- [ 0.000000] MPTABLE: OEM ID: INTEL
- [ 0.000000] MPTABLE: Product ID: Calpella CRB
- [ 0.000000] MPTABLE: APIC at: 0xFEE00000
- [ 0.000000] Processor #0 (Bootup-CPU)
- [ 0.000000] Processor #4
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] Processors: 2
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
- [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s28224 r0 d20928 u1048576
- [ 0.000000] pcpu-alloc: s28224 r0 d20928 u1048576 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 500992
- [ 0.000000] Kernel command line: quiet acpi=off video=uvesafb:1024x768-32,mtrr:3,ywrap splash=silent,theme:livecd-2007.0 console=tty1 logo.nologo BOOT_MSG="Welcome to use Ahead 3D Ipvod System!"
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007b800)
- [ 0.000000] Memory: 1988696k/2023424k available (3811k kernel code, 31084k reserved, 1946k data, 448k init, 1106844k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
- [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
- [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
- [ 0.000000] .init : 0xc15a0000 - 0xc1610000 ( 448 kB)
- [ 0.000000] .data : 0xc13b8e88 - 0xc159f940 (1946 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc13b8e88 (3811 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
- [ 0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty1] enabled
- [ 0.001000] Fast TSC calibration using PIT
- [ 0.002000] Detected 2127.652 MHz processor.
- [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.30 BogoMIPS (lpj=2127652)
- [ 0.000007] pid_max: default: 32768 minimum: 301
- [ 0.000025] Security Framework initialized
- [ 0.000076] Mount-cache hash table entries: 512
- [ 0.000191] CPU: Physical Processor ID: 0
- [ 0.000193] CPU: Processor Core ID: 0
- [ 0.000198] mce: CPU supports 9 MCE banks
- [ 0.000209] CPU0: Thermal monitoring enabled (TM1)
- [ 0.000217] using mwait in idle threads.
- [ 0.002163] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.002236] ExtINT not setup in hardware but reported by MP table
- [ 0.002500] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
- [ 0.012497] CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz stepping 02
- [ 0.216115] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
- [ 0.216121] ... version: 3
- [ 0.216123] ... bit width: 48
- [ 0.216124] ... generic registers: 4
- [ 0.216126] ... value mask: 0000ffffffffffff
- [ 0.216127] ... max period: 000000007fffffff
- [ 0.216129] ... fixed-purpose events: 3
- [ 0.216130] ... event mask: 000000070000000f
- [ 0.216277] CPU 1 irqstacks, hard=f5c70000 soft=f5c72000
- [ 0.216279] Booting Node 0, Processors #1 Ok.
- [ 0.216281] smpboot cpu 1: start_ip = 98000
- [ 0.226712] Initializing CPU#1
- [ 0.307197] Brought up 2 CPUs
- [ 0.307200] Total of 2 processors activated (8510.57 BogoMIPS).
- [ 0.308305] kworker/u:0 used greatest stack depth: 7484 bytes left
- [ 0.308447] PM: Registering ACPI NVS region at 7b470000 (528384 bytes)
- [ 0.308461] PM: Registering ACPI NVS region at 7b77d000 (139264 bytes)
- [ 0.308550] Time: 8:11:18 Date: 06/14/12
- [ 0.308579] NET: Registered protocol family 16
- [ 0.308904] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
- [ 0.309040] PCI: PCI BIOS revision 3.00 entry at 0xfda52, last bus=15
- [ 0.309042] PCI: Using configuration type 1 for base access
- [ 0.309108] kworker/u:0 used greatest stack depth: 7472 bytes left
- [ 0.309246] kworker/u:0 used greatest stack depth: 7140 bytes left
- [ 0.313776] bio: create slab <bio-0> at 0
- [ 0.313861] ACPI: Interpreter disabled.
- [ 0.313988] vgaarb: loaded
- [ 0.314119] SCSI subsystem initialized
- [ 0.314207] libata version 3.00 loaded.
- [ 0.314356] usbcore: registered new interface driver usbfs
- [ 0.314389] usbcore: registered new interface driver hub
- [ 0.314428] usbcore: registered new device driver usb
- [ 0.314599] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.314601] PCI: Probing PCI hardware
- [ 0.314604] PCI: Probing PCI hardware (bus 00)
- [ 0.314647] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
- [ 0.314686] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
- [ 0.314722] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.314726] pci 0000:00:01.0: PME# disabled
- [ 0.314761] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
- [ 0.314789] pci 0000:00:16.0: reg 10: [mem 0xf0604000-0xf060400f 64bit]
- [ 0.314879] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.314883] pci 0000:00:16.0: PME# disabled
- [ 0.314913] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
- [ 0.314932] pci 0000:00:1a.0: reg 10: [mem 0xf0606000-0xf06063ff]
- [ 0.315015] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.315019] pci 0000:00:1a.0: PME# disabled
- [ 0.315040] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
- [ 0.315053] pci 0000:00:1b.0: reg 10: [mem 0xf0600000-0xf0603fff 64bit]
- [ 0.315114] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.315117] pci 0000:00:1b.0: PME# disabled
- [ 0.315133] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
- [ 0.315216] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.315220] pci 0000:00:1c.0: PME# disabled
- [ 0.315238] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
- [ 0.315299] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.315303] pci 0000:00:1c.1: PME# disabled
- [ 0.315330] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
- [ 0.315350] pci 0000:00:1d.0: reg 10: [mem 0xf0607000-0xf06073ff]
- [ 0.315432] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.315436] pci 0000:00:1d.0: PME# disabled
- [ 0.315453] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
- [ 0.315510] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
- [ 0.315624] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
- [ 0.315641] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
- [ 0.315649] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
- [ 0.315656] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
- [ 0.315664] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
- [ 0.315672] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
- [ 0.315679] pci 0000:00:1f.2: reg 24: [mem 0xf0608000-0xf06087ff]
- [ 0.315720] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.315723] pci 0000:00:1f.2: PME# disabled
- [ 0.315738] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
- [ 0.315752] pci 0000:00:1f.3: reg 10: [mem 0xf0609000-0xf06090ff 64bit]
- [ 0.315771] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
- [ 0.315828] pci 0000:02:00.0: [10de:0a29] type 0 class 0x000300
- [ 0.315837] pci 0000:02:00.0: reg 10: [mem 0xcc000000-0xccffffff]
- [ 0.315848] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.315858] pci 0000:02:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
- [ 0.315865] pci 0000:02:00.0: reg 24: [io 0x2000-0x207f]
- [ 0.315872] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
- [ 0.315919] pci 0000:02:00.1: [10de:0be2] type 0 class 0x000403
- [ 0.315928] pci 0000:02:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
- [ 0.316011] pci 0000:00:01.0: PCI bridge to [bus 02-02]
- [ 0.316014] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
- [ 0.316017] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
- [ 0.316022] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
- [ 0.316105] pci 0000:03:00.0: [14e4:1692] type 0 class 0x000200
- [ 0.316127] pci 0000:03:00.0: reg 10: [mem 0xf0200000-0xf020ffff 64bit]
- [ 0.316247] pci 0000:03:00.0: PME# supported from D3hot D3cold
- [ 0.316252] pci 0000:03:00.0: PME# disabled
- [ 0.318234] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
- [ 0.318237] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- [ 0.318241] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
- [ 0.318247] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
- [ 0.318332] pci 0000:05:00.0: [14e4:4357] type 0 class 0x000280
- [ 0.318353] pci 0000:05:00.0: reg 10: [mem 0xf0300000-0xf0303fff 64bit]
- [ 0.318470] pci 0000:05:00.0: supports D1 D2
- [ 0.318472] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
- [ 0.318477] pci 0000:05:00.0: PME# disabled
- [ 0.320236] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
- [ 0.320244] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.320252] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
- [ 0.320263] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.320333] pci 0000:00:1e.0: PCI bridge to [bus 0f-0f] (subtractive decode)
- [ 0.320337] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.320341] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 0.320346] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.320349] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- [ 0.320352] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
- [ 0.320816] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.321441] PCI: Discovered primary peer bus 01 [IRQ]
- [ 0.321500] PCI: Discovered primary peer bus 0e [IRQ]
- [ 0.321558] PCI: Discovered primary peer bus 10 [IRQ]
- [ 0.321615] PCI: Discovered primary peer bus 12 [IRQ]
- [ 0.321672] PCI: Discovered primary peer bus 14 [IRQ]
- [ 0.321729] PCI: Discovered primary peer bus 16 [IRQ]
- [ 0.321787] PCI: Discovered primary peer bus 18 [IRQ]
- [ 0.321802] PCI: pci_cache_line_size set to 64 bytes
- [ 0.321949] reserve RAM buffer: 000000000009c400 - 000000000009ffff
- [ 0.321952] reserve RAM buffer: 000000007b27c000 - 000000007bffffff
- [ 0.321957] reserve RAM buffer: 000000007b3e4000 - 000000007bffffff
- [ 0.321961] reserve RAM buffer: 000000007b46f000 - 000000007bffffff
- [ 0.321966] reserve RAM buffer: 000000007b717000 - 000000007bffffff
- [ 0.321969] reserve RAM buffer: 000000007b77d000 - 000000007bffffff
- [ 0.321972] reserve RAM buffer: 000000007b7df000 - 000000007bffffff
- [ 0.321975] reserve RAM buffer: 000000007b800000 - 000000007bffffff
- [ 0.322226] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.322459] NetLabel: Initializing
- [ 0.322460] NetLabel: domain hash size = 128
- [ 0.322462] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.322472] NetLabel: unlabeled traffic allowed by default
- [ 0.323895] pnp: PnP ACPI: disabled
- [ 0.326343] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.326378] pci 0000:00:1c.1: BAR 9: assigned [mem 0x7c000000-0x7c1fffff 64bit pref]
- [ 0.326382] pci 0000:00:1c.1: BAR 7: assigned [io 0x4000-0x4fff]
- [ 0.326387] pci 0000:02:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
- [ 0.326389] pci 0000:00:01.0: PCI bridge to [bus 02-02]
- [ 0.326392] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
- [ 0.326396] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
- [ 0.326399] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
- [ 0.326404] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
- [ 0.326407] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- [ 0.326411] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
- [ 0.326415] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
- [ 0.326421] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
- [ 0.326424] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
- [ 0.326429] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
- [ 0.326433] pci 0000:00:1c.1: bridge window [mem 0x7c000000-0x7c1fffff 64bit pref]
- [ 0.326438] pci 0000:00:1e.0: PCI bridge to [bus 0f-0f]
- [ 0.326440] pci 0000:00:1e.0: bridge window [io disabled]
- [ 0.326445] pci 0000:00:1e.0: bridge window [mem disabled]
- [ 0.326448] pci 0000:00:1e.0: bridge window [mem pref disabled]
- [ 0.326464] pci 0000:00:01.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 0.326468] pci 0000:00:01.0: setting latency timer to 64
- [ 0.326475] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17
- [ 0.326479] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.326486] pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 16
- [ 0.326490] pci 0000:00:1c.1: setting latency timer to 64
- [ 0.326496] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.326499] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- [ 0.326502] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
- [ 0.326504] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
- [ 0.326507] pci_bus 0000:02: resource 1 [mem 0xcc000000-0xcdefffff]
- [ 0.326509] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
- [ 0.326512] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
- [ 0.326514] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
- [ 0.326516] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
- [ 0.326519] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
- [ 0.326521] pci_bus 0000:05: resource 1 [mem 0xf0300000-0xf03fffff]
- [ 0.326524] pci_bus 0000:05: resource 2 [mem 0x7c000000-0x7c1fffff 64bit pref]
- [ 0.326526] pci_bus 0000:0f: resource 4 [io 0x0000-0xffff]
- [ 0.326528] pci_bus 0000:0f: resource 5 [mem 0x00000000-0xfffffffff]
- [ 0.326531] pci_bus 0000:01: resource 0 [io 0x0000-0xffff]
- [ 0.326533] pci_bus 0000:01: resource 1 [mem 0x00000000-0xfffffffff]
- [ 0.326536] pci_bus 0000:0e: resource 0 [io 0x0000-0xffff]
- [ 0.326538] pci_bus 0000:0e: resource 1 [mem 0x00000000-0xfffffffff]
- [ 0.326540] pci_bus 0000:10: resource 0 [io 0x0000-0xffff]
- [ 0.326543] pci_bus 0000:10: resource 1 [mem 0x00000000-0xfffffffff]
- [ 0.326545] pci_bus 0000:12: resource 0 [io 0x0000-0xffff]
- [ 0.326547] pci_bus 0000:12: resource 1 [mem 0x00000000-0xfffffffff]
- [ 0.326549] pci_bus 0000:14: resource 0 [io 0x0000-0xffff]
- [ 0.326552] pci_bus 0000:14: resource 1 [mem 0x00000000-0xfffffffff]
- [ 0.326554] pci_bus 0000:16: resource 0 [io 0x0000-0xffff]
- [ 0.326556] pci_bus 0000:16: resource 1 [mem 0x00000000-0xfffffffff]
- [ 0.326559] pci_bus 0000:18: resource 0 [io 0x0000-0xffff]
- [ 0.326561] pci_bus 0000:18: resource 1 [mem 0x00000000-0xfffffffff]
- [ 0.326581] NET: Registered protocol family 2
- [ 0.326603] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.326660] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.327361] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.327709] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.327712] TCP reno registered
- [ 0.327715] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.327726] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.327795] NET: Registered protocol family 1
- [ 0.327817] pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 0.327834] pci 0000:00:1a.0: EHCI: BIOS handoff
- [ 0.346219] pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
- [ 0.346283] pci 0000:02:00.0: Boot video device
- [ 0.346357] PCI: CLS 64 bytes, default 64
- [ 0.346396] Trying to unpack rootfs image as initramfs...
- [ 0.541514] Freeing initrd memory: 7164k freed
- [ 0.543332] platform rtc_cmos: registered platform RTC device (no PNP device found)
- [ 0.543976] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
- [ 0.543983] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
- [ 0.544016] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.547136] highmem bounce pool size: 64 pages
- [ 0.547140] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.549709] VFS: Disk quotas dquot_6.5.2
- [ 0.549780] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.550342] msgmni has been set to 1736
- [ 0.550618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.550621] io scheduler noop registered
- [ 0.550622] io scheduler deadline registered
- [ 0.550634] io scheduler cfq registered (default)
- [ 0.550868] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.551233] v86d used greatest stack depth: 7056 bytes left
- [ 0.614172] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev , OEM: NVIDIA, VBE v3.0
- [ 0.658602] uvesafb: NX protection is actively.We have better not to use the PMI.
- [ 0.663741] uvesafb: VBIOS/hardware doesn't support DDC transfers
- [ 0.663743] uvesafb: no monitor limits have been set, default refresh rate will be used
- [ 0.664111] uvesafb: scrolling: redraw
- [ 0.857320] Console: switching to colour frame buffer device 128x48
- [ 0.860932] uvesafb: framebuffer at 0xcf000000, mapped to 0xf8480000, using 6144k, total 14336k
- [ 0.860935] fb0: VESA VGA frame buffer device
- [ 0.860950] XENFS: not registering filesystem on non-xen platform
- [ 0.861014] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.875465] Non-volatile memory driver v1.3
- [ 0.876982] brd: module loaded
- [ 0.877713] loop: module loaded
- [ 0.877903] ahci 0000:00:1f.2: version 3.0
- [ 0.877920] ahci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
- [ 0.877955] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
- [ 0.877984] ahci: SSS flag set, parallel bus scan disabled
- [ 0.878009] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
- [ 0.878013] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
- [ 0.878018] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.880433] scsi0 : ahci
- [ 0.880544] scsi1 : ahci
- [ 0.880626] scsi2 : ahci
- [ 0.880707] scsi3 : ahci
- [ 0.880787] scsi4 : ahci
- [ 0.880902] ata1: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608100 irq 40
- [ 0.880904] ata2: DUMMY
- [ 0.880906] ata3: DUMMY
- [ 0.880907] ata4: DUMMY
- [ 0.880909] ata5: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608300 irq 40
- [ 0.881293] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 0.881295] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 0.881336] tg3.c:v3.119 (May 18, 2011)
- [ 0.881376] tg3 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 0.881383] tg3 0000:03:00.0: setting latency timer to 64
- [ 0.886408] tg3 mdio bus: probed
- [ 0.891446] tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:9a:ca:e4
- [ 0.891450] tg3 0000:03:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01)
- [ 0.891453] tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- [ 0.891456] tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- [ 0.891569] PPP generic driver version 2.4.2
- [ 0.891630] PPP Deflate Compression module registered
- [ 0.891632] PPP BSD Compression module registered
- [ 0.891729] PPP MPPE Compression module registered
- [ 0.891732] NET: Registered protocol family 24
- [ 0.891770] usbcore: registered new interface driver cdc_ether
- [ 0.891802] usbcore: registered new interface driver dm9601
- [ 0.891828] usbcore: registered new interface driver net1080
- [ 0.891853] usbcore: registered new interface driver cdc_subset
- [ 0.891880] usbcore: registered new interface driver zaurus
- [ 0.891888] console [netcon0] enabled
- [ 0.891889] netconsole: network logging started
- [ 0.891986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.891989] ehci_hcd: block sizes: qh 68 qtd 96 itd 160 sitd 96
- [ 0.892005] ehci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 0.892018] ehci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.892022] ehci_hcd 0000:00:1a.0: EHCI Host Controller
- [ 0.892043] /mnt/sda7/kernel/linux/drivers/usb/core/inode.c: creating file 'devices'
- [ 0.892047] /mnt/sda7/kernel/linux/drivers/usb/core/inode.c: creating file '001'
- [ 0.892087] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 0.892095] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
- [ 0.892099] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.892112] ehci_hcd 0000:00:1a.0: support lpm
- [ 0.892122] ehci_hcd 0000:00:1a.0: debug port 2
- [ 0.892127] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.896075] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
- [ 0.896077] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
- [ 0.896087] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0606000
- [ 0.896092] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.900037] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.905848] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 0.905895] usb usb1: default language 0x0409
- [ 0.905908] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.905914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.905920] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.905925] usb usb1: Product: EHCI Host Controller
- [ 0.905930] usb usb1: Manufacturer: Linux 3.0.31+ ehci_hcd
- [ 0.905934] usb usb1: SerialNumber: 0000:00:1a.0
- [ 0.906006] usb usb1: usb_probe_device
- [ 0.906009] usb usb1: configuration #1 chosen from 1 choice
- [ 0.906016] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.906054] hub 1-0:1.0: usb_probe_interface
- [ 0.906057] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.906059] hub 1-0:1.0: USB hub found
- [ 0.906063] hub 1-0:1.0: 3 ports detected
- [ 0.906065] hub 1-0:1.0: standalone hub
- [ 0.906067] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.906069] hub 1-0:1.0: individual port over-current protection
- [ 0.906071] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.906074] hub 1-0:1.0: local power source is good
- [ 0.906077] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.906095] /mnt/sda7/kernel/linux/drivers/usb/core/inode.c: creating file '001'
- [ 0.906125] ehci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
- [ 0.906136] ehci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.906140] ehci_hcd 0000:00:1d.0: EHCI Host Controller
- [ 0.906144] /mnt/sda7/kernel/linux/drivers/usb/core/inode.c: creating file '002'
- [ 0.906185] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.906192] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
- [ 0.906195] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.906207] ehci_hcd 0000:00:1d.0: support lpm
- [ 0.906216] ehci_hcd 0000:00:1d.0: debug port 2
- [ 0.906221] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.910177] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
- [ 0.910179] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
- [ 0.910189] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0607000
- [ 0.910193] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.914140] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.919833] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 0.919863] usb usb2: default language 0x0409
- [ 0.919875] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.919881] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.919887] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.919892] usb usb2: Product: EHCI Host Controller
- [ 0.919897] usb usb2: Manufacturer: Linux 3.0.31+ ehci_hcd
- [ 0.919901] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.919977] usb usb2: usb_probe_device
- [ 0.919980] usb usb2: configuration #1 chosen from 1 choice
- [ 0.919985] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.920022] hub 2-0:1.0: usb_probe_interface
- [ 0.920024] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.920026] hub 2-0:1.0: USB hub found
- [ 0.920029] hub 2-0:1.0: 3 ports detected
- [ 0.920031] hub 2-0:1.0: standalone hub
- [ 0.920033] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.920035] hub 2-0:1.0: individual port over-current protection
- [ 0.920037] hub 2-0:1.0: power on to power good time: 20ms
- [ 0.920040] hub 2-0:1.0: local power source is good
- [ 0.920042] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.920061] /mnt/sda7/kernel/linux/drivers/usb/core/inode.c: creating file '001'
- [ 0.920107] Initializing USB Mass Storage driver...
- [ 0.920143] usbcore: registered new interface driver usb-storage
- [ 0.920145] USB Mass Storage support registered.
- [ 0.920203] usbcore: registered new interface driver usbserial
- [ 0.920205] usbserial: USB Serial Driver core
- [ 0.920231] USB Serial support registered for FTDI USB Serial Device
- [ 0.920272] usbcore: registered new interface driver ftdi_sio
- [ 0.920274] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
- [ 0.920366] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 0.939627] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.939633] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.939753] mousedev: PS/2 mouse device common for all mice
- [ 0.940242] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
- [ 0.940267] rtc0: alarms up to one day, 114 bytes nvram
- [ 0.940294] cpuidle: using governor ladder
- [ 0.940296] cpuidle: using governor menu
- [ 0.940298] EFI Variables Facility v0.08 2004-May-17
- [ 0.940674] usbcore: registered new interface driver usbhid
- [ 0.940675] usbhid: USB HID core driver
- [ 0.940772] HDA Intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
- [ 0.940812] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
- [ 0.940832] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 0.954036] hda_codec: ALC272X: BIOS auto-probing.
- [ 0.956771] HDA Intel 0000:02:00.1: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 0.956774] hda_intel: Disabling MSI
- [ 0.956793] HDA Intel 0000:02:00.1: setting latency timer to 64
- [ 0.958537] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 1.011785] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 1.011795] hub 1-0:1.0: port 1: status 0501 change 0001
- [ 1.020939] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 1.020942] hub 2-0:1.0: port 1: status 0501 change 0001
- [ 1.111723] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
- [ 1.111737] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 1.151558] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 1.162826] ehci_hcd 0000:00:1a.0: port 1 high speed
- [ 1.162830] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.178537] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 1.198540] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.199675] ata1.00: ATA-8: WDC WD3200BEVT-22A23T0, 01.01A01, max UDMA/133
- [ 1.199682] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.200861] ata1.00: configured for UDMA/133
- [ 1.200996] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 01.0 PQ: 0 ANSI: 5
- [ 1.201144] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 1.201183] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.201185] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.201203] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.201211] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.205528] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 1.213529] usb 1-1: new high speed USB device number 2 using ehci_hcd
- [ 1.232509] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 1.264784] ehci_hcd 0000:00:1a.0: port 1 high speed
- [ 1.264788] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.274788] ALSA device list:
- [ 1.274790] #0: HDA Intel at 0xf0600000 irq 41
- [ 1.274792] #1: HDA NVidia at 0xcdefc000 irq 16
- [ 1.274838] TCP cubic registered
- [ 1.274840] NET: Registered protocol family 17
- [ 1.274846] lib80211: common routines for IEEE802.11 drivers
- [ 1.274848] lib80211_crypt: registered algorithm 'NULL'
- [ 1.274850] Registering the dns_resolver key type
- [ 1.274868] Using IPI No-Shortcut mode
- [ 1.274969] PM: Hibernation image not present or could not be loaded.
- [ 1.274975] registered taskstats version 1
- [ 1.275257] Magic number: 0:514:169
- [ 1.295394] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
- [ 1.295886] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.327525] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
- [ 1.327532] ehci_hcd 0000:00:1a.0: LPM: no device attached
- [ 1.327774] usb 1-1: udev 2, busnum 1, minor = 1
- [ 1.327780] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
- [ 1.327786] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.327883] usb 1-1: usb_probe_device
- [ 1.327886] usb 1-1: configuration #1 chosen from 1 choice
- [ 1.328038] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
- [ 1.328126] hub 1-1:1.0: usb_probe_interface
- [ 1.328128] hub 1-1:1.0: usb_probe_interface - got id
- [ 1.328130] hub 1-1:1.0: USB hub found
- [ 1.328273] hub 1-1:1.0: 6 ports detected
- [ 1.328277] hub 1-1:1.0: standalone hub
- [ 1.328281] hub 1-1:1.0: individual port power switching
- [ 1.328285] hub 1-1:1.0: individual port over-current protection
- [ 1.328289] hub 1-1:1.0: Single TT
- [ 1.328294] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 1.328298] hub 1-1:1.0: Port indicators are supported
- [ 1.328303] hub 1-1:1.0: power on to power good time: 100ms
- [ 1.328521] hub 1-1:1.0: local power source is good
- [ 1.328526] hub 1-1:1.0: enabling power on all ports
- [ 1.329288] /mnt/sda7/kernel/linux/drivers/usb/core/inode.c: creating file '002'
- [ 1.329316] hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000
- [ 1.329325] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 1.379735] ehci_hcd 0000:00:1d.0: port 1 high speed
- [ 1.379739] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.429107] usb 1-1: link qh256-0001/f5ee3c60 start 1 [1/0 us]
- [ 1.430394] usb 2-1: new high speed USB device number 2 using ehci_hcd
- [ 1.481691] ehci_hcd 0000:00:1d.0: port 1 high speed
- [ 1.481696] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.505355] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.505640] ata5.00: ATAPI: Optiarc DVD RW AD-7585H, KX04, max UDMA/100
- [ 1.506436] ata5.00: configured for UDMA/100
- [ 1.507856] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7585H KX04 PQ: 0 ANSI: 5
- [ 1.511203] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.511210] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.511365] sr 4:0:0:0: Attached scsi CD-ROM sr0
- [ 1.511439] sr 4:0:0:0: Attached scsi generic sg1 type 5
- [ 1.511526] Freeing unused kernel memory: 448k freed
- [ 1.544422] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
- [ 1.544427] ehci_hcd 0000:00:1d.0: LPM: no device attached
- [ 1.544673] usb 2-1: udev 2, busnum 2, minor = 129
- [ 1.544675] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
- [ 1.544678] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.544760] usb 2-1: usb_probe_device
- [ 1.544764] usb 2-1: configuration #1 chosen from 1 choice
- [ 1.544806] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
- [ 1.544852] hub 2-1:1.0: usb_probe_interface
- [ 1.544855] hub 2-1:1.0: usb_probe_interface - got id
- [ 1.544857] hub 2-1:1.0: USB hub found
- [ 1.544920] hub 2-1:1.0: 8 ports detected
- [ 1.544922] hub 2-1:1.0: standalone hub
- [ 1.544924] hub 2-1:1.0: individual port power switching
- [ 1.544926] hub 2-1:1.0: individual port over-current protection
- [ 1.544928] hub 2-1:1.0: Single TT
- [ 1.544929] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 1.544931] hub 2-1:1.0: Port indicators are supported
- [ 1.544933] hub 2-1:1.0: power on to power good time: 100ms
- [ 1.545169] hub 2-1:1.0: local power source is good
- [ 1.545171] hub 2-1:1.0: enabling power on all ports
- [ 1.546185] /mnt/sda7/kernel/linux/drivers/usb/core/inode.c: creating file '002'
- [ 1.546201] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
- [ 1.548579] usbdisk_link used greatest stack depth: 6904 bytes left
- [ 1.557316] Switching to clocksource tsc
- [ 1.604936] exe used greatest stack depth: 6812 bytes left
- [ 1.645515] hub 2-1:1.0: port 1: status 0101 change 0001
- [ 1.646133] hub 2-1:1.0: port 5: status 0101 change 0001
- [ 1.746342] usb 2-1: link qh256-0001/f5e64c00 start 1 [1/0 us]
- [ 1.746363] hub 2-1:1.0: state 7 ports 8 chg 0022 evt 0000
- [ 1.746471] hub 2-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 1.757465] hub 2-1:1.0: port 1 not reset yet, waiting 10ms
- [ 1.819324] usb 2-1.1: new low speed USB device number 3 using ehci_hcd
- [ 1.873225] EXT3-fs: barriers not enabled
- [ 1.873400] kjournald starting. Commit interval 5 seconds
- [ 1.873662] EXT3-fs (sda2): using internal journal
- [ 1.873671] EXT3-fs (sda2): mounted filesystem with writeback data mode
- [ 1.896285] usb 2-1.1: skipped 1 descriptor after interface
- [ 1.896778] usb 2-1.1: default language 0x0409
- [ 1.899407] usb 2-1.1: udev 3, busnum 2, minor = 130
- [ 1.899414] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c019
- [ 1.899421] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.899427] usb 2-1.1: Product: USB Optical Mouse
- [ 1.899431] usb 2-1.1: Manufacturer: Logitech
- [ 1.922968] usb 2-1.1: usb_probe_device
- [ 1.922976] usb 2-1.1: configuration #1 chosen from 1 choice
- [ 1.922992] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
- [ 1.923274] usb 2-1.1: adding 2-1.1:1.0 (config #1, interface 0)
- [ 1.923332] usbhid 2-1.1:1.0: usb_probe_interface
- [ 1.923335] usbhid 2-1.1:1.0: usb_probe_interface - got id
- [ 1.925306] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
- [ 1.925378] generic-usb 0003:046D:C019.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
- [ 1.925391] /mnt/sda7/kernel/linux/drivers/usb/core/inode.c: creating file '003'
- [ 1.925520] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
- [ 1.936265] hub 2-1:1.0: port 5 not reset yet, waiting 10ms
- [ 1.998124] usb 2-1.5: new high speed USB device number 4 using ehci_hcd
- [ 2.018234] hub 2-1:1.0: port 5 not reset yet, waiting 10ms
- [ 2.172428] usb 2-1.5: skipped 1 descriptor after configuration
- [ 2.172436] usb 2-1.5: skipped 6 descriptors after interface
- [ 2.172442] usb 2-1.5: skipped 1 descriptor after endpoint
- [ 2.172448] usb 2-1.5: skipped 6 descriptors after interface
- [ 2.173542] usb 2-1.5: default language 0x0409
- [ 2.190660] usb 2-1.5: udev 4, busnum 2, minor = 131
- [ 2.190666] usb 2-1.5: New USB device found, idVendor=0402, idProduct=9665
- [ 2.190672] usb 2-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=0
- [ 2.190678] usb 2-1.5: Product: 1.3M WebCam
- [ 2.190682] usb 2-1.5: Manufacturer: XPA210CKM
- [ 2.190780] usb 2-1.5: usb_probe_device
- [ 2.190783] usb 2-1.5: configuration #1 chosen from 1 choice
- [ 2.190914] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0)
- [ 2.203755] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1)
- [ 2.203805] /mnt/sda7/kernel/linux/drivers/usb/core/inode.c: creating file '004'
- [ 2.203819] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0020
- [ 2.927765] modprobe used greatest stack depth: 5888 bytes left
- [ 4.106282] init-early.sh used greatest stack depth: 5752 bytes left
- [ 6.704795] udev[1964]: starting version 164
- [ 10.592914] wl: module license 'unspecified' taints kernel.
- [ 10.592917] Disabling lock debugging due to kernel taint
- [ 10.600603] wl 0000:05:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
- [ 10.600610] wl 0000:05:00.0: setting latency timer to 64
- [ 10.628342] INFO @wl_cfg80211_attach : Registered CFG80211 phy
- [ 10.629518] eth1: Broadcom BCM4357 802.11 Hybrid Wireless Controller 5.100.82.112
- [ 10.638926] udev[1983]: renamed network interface eth1 to eth2
- [ 11.905006] nvidia 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 11.905019] nvidia 0000:02:00.0: setting latency timer to 64
- [ 11.905024] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 11.905120] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
- [ 15.470839] EXT3-fs: barriers not enabled
- [ 15.489962] kjournald starting. Commit interval 5 seconds
- [ 15.490243] EXT3-fs (sda5): using internal journal
- [ 15.490251] EXT3-fs (sda5): mounted filesystem with writeback data mode
- [ 15.531800] EXT3-fs: barriers not enabled
- [ 15.547903] kjournald starting. Commit interval 5 seconds
- [ 15.548195] EXT3-fs (sda6): using internal journal
- [ 15.548202] EXT3-fs (sda6): mounted filesystem with writeback data mode
- [ 15.592787] EXT3-fs: barriers not enabled
- [ 15.605735] kjournald starting. Commit interval 5 seconds
- [ 15.606046] EXT3-fs (sda7): using internal journal
- [ 15.606053] EXT3-fs (sda7): mounted filesystem with writeback data mode
- [ 17.844652] Adding 4551676k swap on /dev/sda8. Priority:-1 extents:1 across:4551676k
- [ 18.712011] usb 2-1.1: link qh8-0601/f753aa80 start 2 [1/2 us]
- [ 18.714988] usb 2-1.1: unlink qh8-0601/f753aa80 start 2 [1/2 us]
- [ 19.649699] tg3 0000:03:00.0: irq 42 for MSI/MSI-X
- [ 20.004397] tg3 0000:03:00.0: eth0: Link is down
- [ 21.667095] vboxdrv: Found 2 processor cores.
- [ 21.667187] vboxdrv: fAsync=0 offMin=0x26c offMax=0x12bc
- [ 21.667408] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
- [ 21.667410] vboxdrv: Successfully loaded version 4.1.8 (interface 0x00190000).
- [ 21.952096] vboxpci: pci-stub module not available, cannot detach PCI devices
- [ 21.952098] vboxpci: IOMMU not found (not registered)
- [ 22.011072] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex
- [ 22.011076] tg3 0000:03:00.0: eth0: Flow control is off for TX and off for RX
- [ 25.585325] NVRM: failed to register with the ACPI subsystem!
- [ 29.343493] ehci_hcd 0000:00:1d.0: reused qh f753aa80 schedule
- [ 29.343497] usb 2-1.1: link qh8-0601/f753aa80 start 2 [1/2 us]
- [ 49.786948] ata1.00: configured for UDMA/133
- [ 49.786953] ata1: EH complete
- [ 79.704497] atkbd serio0: Unknown key pressed (translated set 2, code 0x93 on isa0060/serio0).
- [ 79.704505] atkbd serio0: Use 'setkeycodes e013 <keycode>' to make it known.
- [ 79.803603] atkbd serio0: Unknown key released (translated set 2, code 0x93 on isa0060/serio0).
- [ 79.803611] atkbd serio0: Use 'setkeycodes e013 <keycode>' to make it known.
- [ 1322.959721] device eth0 entered promiscuous mode
- [ 1429.317077] device eth0 left promiscuous mode
- [ 1430.166482] VirtualBox used greatest stack depth: 5708 bytes left
- [ 1430.453394] vboxnetflt: dropped 0 out of 952 packets
- [ 4780.087109] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:45053 ulen 123
- [ 9835.249420] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:58953 ulen 91
- [ 9912.425341] UDP: bad checksum. From 218.85.152.99:53 to 192.168.1.84:40184 ulen 130
- [ 9949.131400] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:38238 ulen 110
- [10364.492434] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:37478 ulen 329
- [13253.976762] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:50622 ulen 277
- [13254.037058] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:42936 ulen 251
- [13254.056877] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:34588 ulen 277
- [13294.465493] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:37945 ulen 506
- [13310.997334] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:35271 ulen 217
- [13689.812504] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:50100 ulen 204
- [13690.923722] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:46544 ulen 356
- [13692.720226] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:41721 ulen 448
- [14093.144266] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:36204 ulen 299
- [16191.672268] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:40655 ulen 411
- [16192.310614] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:33658 ulen 204
- [16250.138708] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:48245 ulen 418
- [18297.301014] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:55639 ulen 195
- [18648.413500] UDP: bad checksum. From 218.85.157.99:53 to 192.168.1.84:50555 ulen 392
Add Comment
Please, Sign In to add comment