Advertisement
ogre_x

dmesg

May 20th, 2016
151
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 53.00 KB | None | 0 0
  1. [ 0.000000] Booting Linux on physical CPU 0xf00
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 4.4.8-7-osmc (root@vero2a) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Sun May 15 11:04:25 UTC 2016
  6. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
  9. [ 0.000000] cma: Reserved 8 MiB at 0x2e400000
  10. [ 0.000000] Memory policy: Data cache writealloc
  11. [ 0.000000] On node 0 totalpages: 192512
  12. [ 0.000000] free_area_init_node: node 0, pgdat 80bd0040, node_mem_map add64000
  13. [ 0.000000] Normal zone: 1692 pages used for memmap
  14. [ 0.000000] Normal zone: 0 pages reserved
  15. [ 0.000000] Normal zone: 192512 pages, LIFO batch:31
  16. [ 0.000000] [bcm2709_smp_init_cpus] enter (9660->f3003010)
  17. [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
  18. [ 0.000000] PERCPU: Embedded 13 pages/cpu @aefac000 s23552 r8192 d21504 u53248
  19. [ 0.000000] pcpu-alloc: s23552 r8192 d21504 u53248 alloc=13*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  21. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190820
  22. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa01041 bcm2709.serial=0x806b67ca smsc95xx.macaddr=B8:27:EB:6B:67:CA bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet osmcdev=rbp2
  23. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  26. [ 0.000000] Memory: 741080K/770048K available (8006K kernel code, 439K rwdata, 1864K rodata, 1792K init, 764K bss, 20776K reserved, 8192K cma-reserved)
  27. [ 0.000000] Virtual kernel memory layout:
  28. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  29. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  30. vmalloc : 0xaf800000 - 0xff800000 (1280 MB)
  31. lowmem : 0x80000000 - 0xaf000000 ( 752 MB)
  32. modules : 0x7f000000 - 0x80000000 ( 16 MB)
  33. .text : 0x80008000 - 0x809aba84 (9871 kB)
  34. .init : 0x809ac000 - 0x80b6c000 (1792 kB)
  35. .data : 0x80b6c000 - 0x80bd9d4c ( 440 kB)
  36. .bss : 0x80bdc000 - 0x80c9b32c ( 765 kB)
  37. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [ 0.000000] Preemptible hierarchical RCU implementation.
  39. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  40. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  41. [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
  42. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  43. [ 0.000012] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  44. [ 0.000034] Switching to timer-based delay loop, resolution 52ns
  45. [ 0.000332] Console: colour dummy device 80x30
  46. [ 0.000562] console [tty0] enabled
  47. [ 0.000590] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  48. [ 0.000620] pid_max: default: 32768 minimum: 301
  49. [ 0.000977] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  50. [ 0.000998] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  51. [ 0.002217] Disabling cpuset control group subsystem
  52. [ 0.002267] Initializing cgroup subsys io
  53. [ 0.002302] Initializing cgroup subsys memory
  54. [ 0.002355] Initializing cgroup subsys devices
  55. [ 0.002381] Initializing cgroup subsys freezer
  56. [ 0.002405] Initializing cgroup subsys net_cls
  57. [ 0.002477] CPU: Testing write buffer coherency: ok
  58. [ 0.002559] ftrace: allocating 19419 entries in 57 pages
  59. [ 0.049807] CPU0: update cpu_capacity 1024
  60. [ 0.049848] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  61. [ 0.049864] [bcm2709_smp_prepare_cpus] enter
  62. [ 0.050005] Setting up static identity map for 0x8240 - 0x8298
  63. [ 0.129378] [bcm2709_boot_secondary] cpu:1 started (0) 16
  64. [ 0.129738] [bcm2709_secondary_init] enter cpu:1
  65. [ 0.129798] CPU1: update cpu_capacity 1024
  66. [ 0.129807] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  67. [ 0.159412] [bcm2709_boot_secondary] cpu:2 started (0) 18
  68. [ 0.159694] [bcm2709_secondary_init] enter cpu:2
  69. [ 0.159728] CPU2: update cpu_capacity 1024
  70. [ 0.159737] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  71. [ 0.189489] [bcm2709_boot_secondary] cpu:3 started (0) 16
  72. [ 0.189742] [bcm2709_secondary_init] enter cpu:3
  73. [ 0.189773] CPU3: update cpu_capacity 1024
  74. [ 0.189782] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  75. [ 0.189872] Brought up 4 CPUs
  76. [ 0.189903] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  77. [ 0.189914] CPU: All CPU(s) started in HYP mode.
  78. [ 0.189923] CPU: Virtualization extensions available.
  79. [ 0.190869] devtmpfs: initialized
  80. [ 0.202303] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  81. [ 0.202813] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  82. [ 0.203890] pinctrl core: initialized pinctrl subsystem
  83. [ 0.204709] NET: Registered protocol family 16
  84. [ 0.210161] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  85. [ 0.239629] cpuidle: using governor ladder
  86. [ 0.269663] cpuidle: using governor menu
  87. [ 0.276783] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  88. [ 0.276804] hw-breakpoint: maximum watchpoint size is 8 bytes.
  89. [ 0.276990] Serial: AMBA PL011 UART driver
  90. [ 0.277312] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  91. [ 0.278004] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  92. [ 0.351406] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
  93. [ 0.353345] SCSI subsystem initialized
  94. [ 0.353580] usbcore: registered new interface driver usbfs
  95. [ 0.353692] usbcore: registered new interface driver hub
  96. [ 0.353868] usbcore: registered new device driver usb
  97. [ 0.359903] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-04-27 11:10
  98. [ 0.387113] clocksource: Switched to clocksource arch_sys_counter
  99. [ 0.439620] FS-Cache: Loaded
  100. [ 0.440032] CacheFiles: Loaded
  101. [ 0.456468] NET: Registered protocol family 2
  102. [ 0.457754] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  103. [ 0.457895] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  104. [ 0.458089] TCP: Hash tables configured (established 8192 bind 8192)
  105. [ 0.458220] UDP hash table entries: 512 (order: 2, 16384 bytes)
  106. [ 0.458287] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  107. [ 0.458655] NET: Registered protocol family 1
  108. [ 0.459169] RPC: Registered named UNIX socket transport module.
  109. [ 0.459189] RPC: Registered udp transport module.
  110. [ 0.459200] RPC: Registered tcp transport module.
  111. [ 0.459212] RPC: Registered tcp NFSv4.1 backchannel transport module.
  112. [ 0.571023] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  113. [ 0.573519] futex hash table entries: 1024 (order: 4, 65536 bytes)
  114. [ 0.573702] audit: initializing netlink subsys (disabled)
  115. [ 0.573778] audit: type=2000 audit(0.539:1): initialized
  116. [ 0.589600] VFS: Disk quotas dquot_6.6.0
  117. [ 0.590003] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  118. [ 0.592791] FS-Cache: Netfs 'nfs' registered for caching
  119. [ 0.594042] NFS: Registering the id_resolver key type
  120. [ 0.594113] Key type id_resolver registered
  121. [ 0.594128] Key type id_legacy registered
  122. [ 0.597511] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  123. [ 0.597729] io scheduler noop registered
  124. [ 0.598314] io scheduler bfq registered (default)
  125. [ 0.598328] BFQ I/O-scheduler version: v7r7
  126. [ 0.601201] BCM2708FB: allocated DMA memory ee800000
  127. [ 0.601251] BCM2708FB: allocated DMA channel 0 @ f3007000
  128. [ 0.635096] Console: switching to colour frame buffer device 240x67
  129. [ 1.487410] bcm2835-rng 3f104000.rng: hwrng registered
  130. [ 1.487562] vc-cma: Videocore CMA driver
  131. [ 1.487578] vc-cma: vc_cma_base = 0x00000000
  132. [ 1.487591] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  133. [ 1.487602] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  134. [ 1.487935] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  135. [ 1.509025] brd: module loaded
  136. [ 1.520586] loop: module loaded
  137. [ 1.521724] vchiq: vchiq_init_state: slot_zero = 0xae880000, is_master = 0
  138. [ 1.523547] Loading iSCSI transport class v2.0-870.
  139. [ 1.524551] usbcore: registered new interface driver smsc95xx
  140. [ 1.524624] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  141. [ 1.725016] Core Release: 2.80a
  142. [ 1.725041] Setting default values for core params
  143. [ 1.725069] Finished setting default values for core params
  144. [ 1.925493] Using Buffer DMA mode
  145. [ 1.925509] Periodic Transfer Interrupt Enhancement - disabled
  146. [ 1.925520] Multiprocessor Interrupt Enhancement - disabled
  147. [ 1.925532] OTG VER PARAM: 0, OTG VER FLAG: 0
  148. [ 1.925551] Dedicated Tx FIFOs mode
  149. [ 1.925999] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae814000 dma = 0xee814000 len=9024
  150. [ 1.926041] FIQ FSM acceleration enabled for :
  151. Non-periodic Split Transactions
  152. Periodic Split Transactions
  153. High-Speed Isochronous Endpoints
  154. Interrupt/Control Split Transaction hack enabled
  155. [ 1.926071] dwc_otg: Microframe scheduler enabled
  156. [ 1.926143] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x8057b424
  157. [ 1.926164] WARN::hcd_init_fiq:414: FIQ ASM at 0x8057b794 length 36
  158. [ 1.926183] WARN::hcd_init_fiq:439: MPHI regs_base at 0xaf87e000
  159. [ 1.926276] dwc_otg 3f980000.usb: DWC OTG Controller
  160. [ 1.926333] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  161. [ 1.926390] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  162. [ 1.926446] Init: Port Power? op_state=1
  163. [ 1.926458] Init: Power Port (0)
  164. [ 1.926818] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  165. [ 1.926840] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  166. [ 1.926858] usb usb1: Product: DWC OTG Controller
  167. [ 1.926876] usb usb1: Manufacturer: Linux 4.4.8-7-osmc dwc_otg_hcd
  168. [ 1.926893] usb usb1: SerialNumber: 3f980000.usb
  169. [ 1.928101] hub 1-0:1.0: USB hub found
  170. [ 1.928179] hub 1-0:1.0: 1 port detected
  171. [ 1.928990] dwc_otg: FIQ enabled
  172. [ 1.929006] dwc_otg: NAK holdoff enabled
  173. [ 1.929017] dwc_otg: FIQ split-transaction FSM enabled
  174. [ 1.929056] Module dwc_common_port init
  175. [ 1.929461] usbcore: registered new interface driver usb-storage
  176. [ 1.929835] mousedev: PS/2 mouse device common for all mice
  177. [ 1.930484] usbcore: registered new interface driver usbtouchscreen
  178. [ 1.930791] bcm2835-cpufreq: min=600000 max=900000
  179. [ 1.933265] sdhci: Secure Digital Host Controller Interface driver
  180. [ 1.933274] sdhci: Copyright(c) Pierre Ossman
  181. [ 1.933569] sdhost: log_buf @ ae813000 (ee813000)
  182. [ 2.007282] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  183. [ 2.027673] sdhci-pltfm: SDHCI platform and OF driver helper
  184. [ 2.028195] ledtrig-cpu: registered to indicate activity on CPUs
  185. [ 2.028358] hidraw: raw HID events driver (C) Jiri Kosina
  186. [ 2.028562] usbcore: registered new interface driver usbhid
  187. [ 2.028571] usbhid: USB HID core driver
  188. [ 2.029058] Initializing XFRM netlink socket
  189. [ 2.029090] NET: Registered protocol family 17
  190. [ 2.029220] Key type dns_resolver registered
  191. [ 2.029360] Registering SWP/SWPB emulation handler
  192. [ 2.030184] registered taskstats version 1
  193. [ 2.030364] vc-sm: Videocore shared memory driver
  194. [ 2.030378] [vc_sm_connected_init]: start
  195. [ 2.030925] [vc_sm_connected_init]: end - returning 0
  196. [ 2.031178] of_cfs_init
  197. [ 2.031291] of_cfs_init: OK
  198. [ 2.034052] Freeing unused kernel memory: 1792K (809ac000 - 80b6c000)
  199. [ 2.064233] mmc0: host does not support reading read-only switch, assuming write-enable
  200. [ 2.066115] mmc0: new high speed SDHC card at address 0001
  201. [ 2.066941] mmcblk0: mmc0:0001 00000 29.8 GiB
  202. [ 2.068432] mmcblk0: p1 p2
  203. [ 2.127332] Indeed it is in host mode hprt0 = 00021501
  204. [ 2.248922] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  205. [ 2.259887] fsck: E2fsck run: /bin/e2fsck -p -C 0 /dev/mmcblk0p2
  206. [ 2.260119] fsck: Filesystem UUID: eef64da0-5aa8-442c-be27-58940a95499d
  207. [ 2.260363] fsck: /dev/mmcblk0p2: clean, 26082/1941504 files, 359674/7752448 blocks
  208. [ 2.307197] usb 1-1: new high-speed USB device number 2 using dwc_otg
  209. [ 2.307361] Indeed it is in host mode hprt0 = 00001101
  210. [ 2.507504] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  211. [ 2.507530] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  212. [ 2.508399] hub 1-1:1.0: USB hub found
  213. [ 2.508492] hub 1-1:1.0: 5 ports detected
  214. [ 2.787233] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  215. [ 2.887559] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  216. [ 2.887587] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  217. [ 2.890568] smsc95xx v1.0.4
  218. [ 2.950631] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:6b:67:ca
  219. [ 3.027212] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
  220. [ 3.142923] usb 1-1.2: New USB device found, idVendor=0e8d, idProduct=7610
  221. [ 3.142949] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  222. [ 3.142962] usb 1-1.2: Product: WiFi
  223. [ 3.142973] usb 1-1.2: Manufacturer: MediaTek
  224. [ 3.142986] usb 1-1.2: SerialNumber: 1.0
  225. [ 3.704843] random: systemd urandom read with 67 bits of entropy available
  226. [ 3.759095] NET: Registered protocol family 10
  227. [ 4.056820] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  228. [ 4.057046] systemd[1]: Found ordering cycle on basic.target/start
  229. [ 4.057068] systemd[1]: Found dependency on sysinit.target/start
  230. [ 4.057159] systemd[1]: Found dependency on kbd.service/start
  231. [ 4.057182] systemd[1]: Found dependency on remote-fs.target/start
  232. [ 4.057200] systemd[1]: Found dependency on remote-fs-pre.target/start
  233. [ 4.057217] systemd[1]: Found dependency on connman.service/start
  234. [ 4.057233] systemd[1]: Found dependency on dbus.service/start
  235. [ 4.057248] systemd[1]: Found dependency on basic.target/start
  236. [ 4.057266] systemd[1]: Breaking ordering cycle by deleting job kbd.service/start
  237. [ 4.057288] systemd[1]: Job kbd.service/start deleted to break ordering cycle starting with basic.target/start
  238. [ 4.057587] systemd[1]: Found ordering cycle on basic.target/start
  239. [ 4.057612] systemd[1]: Found dependency on sysinit.target/start
  240. [ 4.057631] systemd[1]: Found dependency on rpcbind.service/start
  241. [ 4.057649] systemd[1]: Found dependency on network-online.target/start
  242. [ 4.057667] systemd[1]: Found dependency on network.target/start
  243. [ 4.057683] systemd[1]: Found dependency on connman.service/start
  244. [ 4.057699] systemd[1]: Found dependency on dbus.service/start
  245. [ 4.057715] systemd[1]: Found dependency on basic.target/start
  246. [ 4.057731] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
  247. [ 4.057752] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
  248. [ 4.158010] fuse init (API version 7.23)
  249. [ 4.217258] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  250. [ 4.513287] systemd-udevd[179]: starting version 215
  251. [ 4.733355] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  252. [ 4.761399] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  253. [ 4.817364] lirc_dev: IR Remote Control driver registered, major 243
  254. [ 4.859261] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned.
  255. [ 5.745582] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  256. [ 5.817199] lirc_rpi: auto-detected active high receiver on GPIO pin 18
  257. [ 5.817565] lirc_rpi lirc_rpi: lirc_dev: driver lirc_rpi registered at minor = 0
  258. [ 5.817577] lirc_rpi: driver registered!
  259. [ 6.257537] rtusb init rt2870 --->
  260. [ 6.258946]
  261.  
  262. === pAd = b1eb8000, size = 859128 ===
  263.  
  264. [ 6.259017] <-- RTMPAllocTxRxRingMemory, Status=0
  265. [ 6.259184] <-- RTMPAllocAdapterBlock, Status=0
  266. [ 6.259495] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
  267. [ 6.261161] MCUType = 2
  268. [ 6.262605] NVM is EFUSE
  269. [ 6.262624] Endpoint(8) is for In-band Command
  270. [ 6.262632] Endpoint(4) is for WMM0 AC0
  271. [ 6.262641] Endpoint(5) is for WMM0 AC1
  272. [ 6.262649] Endpoint(6) is for WMM0 AC2
  273. [ 6.262656] Endpoint(7) is for WMM0 AC3
  274. [ 6.262663] Endpoint(9) is for WMM1 AC0
  275. [ 6.262671] Endpoint(84) is for Data-In
  276. [ 6.262678] Endpoint(85) is for Command Rsp
  277. [ 6.262898] 80211> RFICType = 3
  278. [ 6.262912] 80211> Number of channel = 44
  279. [ 6.262921] 80211> Number of rate = 12
  280. [ 6.262928] 80211> CurTxPower = 0 dBm
  281. [ 6.262940] 80211> TxStream = 0
  282. [ 6.264130] crda> requlation requestion by core: 00
  283. [ 6.265537] 80211> CFG80211_Register
  284. [ 6.270684] usbcore: registered new interface driver rt2870
  285. [ 6.566094] input: lircd as /devices/virtual/input/input0
  286. [ 6.895180] systemd-journald[153]: Received request to flush runtime journal from PID 1
  287. [ 7.149161] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  288. [ 7.149418] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  289. [ 7.600774] -->RTUSBVenderReset
  290. [ 7.600870] <--RTUSBVenderReset
  291. [ 7.605889] fw version:0.1.00 build:7640
  292. [ 7.605908] build time:201308221655____
  293. [ 7.605953] ilm length = 68780(bytes)
  294. [ 7.605963] dlm length = 11476(bytes)
  295. [ 7.627212] #
  296. [ 7.633972] loading fw......
  297. [ 7.697200] #
  298. [ 7.916570] RTMP_TimerListAdd: add timer obj b1f36f8c!
  299. [ 7.916604] RTMP_TimerListAdd: add timer obj b1f36fd4!
  300. [ 7.916615] RTMP_TimerListAdd: add timer obj b1f3701c!
  301. [ 7.916627] RTMP_TimerListAdd: add timer obj b1f36f44!
  302. [ 7.916642] RTMP_TimerListAdd: add timer obj b1f36e6c!
  303. [ 7.916652] RTMP_TimerListAdd: add timer obj b1f36eb4!
  304. [ 7.916662] RTMP_TimerListAdd: add timer obj b1ecac34!
  305. [ 7.916671] RTMP_TimerListAdd: add timer obj b1eba03c!
  306. [ 7.916680] RTMP_TimerListAdd: add timer obj b1eba088!
  307. [ 7.916688] RTMP_TimerListAdd: add timer obj b1ecad1c!
  308. [ 7.916702] RTMP_TimerListAdd: add timer obj b1ecaba4!
  309. [ 7.916718] RTMP_TimerListAdd: add timer obj b1ecacd4!
  310. [ 7.916745] Loading default parameter profile
  311. [ 7.916762] cfg_mode=12
  312. [ 7.916777] wmode_band_equal(): Band Not Equal!
  313. [ 7.918632] no file read method, using vfs_read
  314. [ 7.920424] cfg_mode=8
  315. [ 7.920441] wmode_band_equal(): Band Not Equal!
  316. [ 7.921032] Key1Str is Invalid key length(0) or Type(0)
  317. [ 7.921096] Key2Str is Invalid key length(0) or Type(0)
  318. [ 7.921160] Key3Str is Invalid key length(0) or Type(0)
  319. [ 7.921221] Key4Str is Invalid key length(0) or Type(0)
  320. [ 7.922442] 1. Phy Mode = 17
  321. [ 7.922454] 2. Phy Mode = 17
  322. [ 7.922465] NVM is Efuse and its size =1d[1e0-1fc]
  323. [ 7.934745] /mnt/package/kernel-osmc/src/linux-4.4.8/drivers/net/wireless/mt7610u/os/linux/../../chips/mt76x0.c:2114 assert (pAd->TxPower[choffset].Channel == 36)failed
  324. [ 7.945152] ERROR!!! E2PROM: WRONG VERSION 0x2, should be 1
  325. [ 7.952545] mt76x0_read_tx_alc_info_from_eeprom: EEPROM_MT76x0_TEMPERATURE_OFFSET (0xD1) = 0xfb
  326. [ 7.952568] mt76x0_read_tx_alc_info_from_eeprom: TemperatureOffset = 0xfffffffb
  327. [ 7.952576] Temperature Tx ALC not enabled
  328. [ 7.973440] 3. Phy Mode = 17
  329. [ 7.973472] AntCfgInit: primary/secondary ant 0/1
  330. [ 7.984484] RTMPSetPhyMode: channel is out of range, use first channel=36
  331. [ 7.987454] MCS Set = ff 00 00 00 01
  332. [ 8.004399] <==== rt28xx_init, Status=0
  333. [ 8.004435] 80211> re-init bands...
  334. [ 8.004696] 80211> re-init bands...
  335. [ 8.004711] 80211> RFICType = 3
  336. [ 8.004720] 80211> Number of channel = 44
  337. [ 8.004727] 80211> Number of rate = 12
  338. [ 8.004734] 80211> CurTxPower = 0 dBm
  339. [ 8.004751] 80211> TxStream = 1
  340. [ 8.004764] crda> CFG80211_RegRuleApply ==>
  341. [ 8.004776] crda> reset chan/power for 2.4GHz
  342. [ 8.004787] crda> reset chan/power for 5GHz
  343. [ 8.004798] Chan 036: power 0 dBm, DFS 0, DFS Type 0
  344. [ 8.004807] Chan 038: power 0 dBm, DFS 0, DFS Type 0
  345. [ 8.004816] Chan 040: power 0 dBm, DFS 0, DFS Type 0
  346. [ 8.004825] Chan 044: power 0 dBm, DFS 0, DFS Type 0
  347. [ 8.004834] Chan 046: power 0 dBm, DFS 0, DFS Type 0
  348. [ 8.004843] Chan 048: power 0 dBm, DFS 0, DFS Type 0
  349. [ 8.004851] Chan 052: power 0 dBm, DFS 1, DFS Type 0
  350. [ 8.004860] Chan 054: power 0 dBm, DFS 1, DFS Type 0
  351. [ 8.004869] Chan 056: power 0 dBm, DFS 1, DFS Type 0
  352. [ 8.004878] Chan 060: power 0 dBm, DFS 1, DFS Type 0
  353. [ 8.004887] Chan 062: power 0 dBm, DFS 1, DFS Type 0
  354. [ 8.004900] Chan 064: power 0 dBm, DFS 1, DFS Type 0
  355. [ 8.004909] Chan 100: power 0 dBm, DFS 1, DFS Type 0
  356. [ 8.004919] Chan 104: power 0 dBm, DFS 1, DFS Type 0
  357. [ 8.004931] Chan 108: power 0 dBm, DFS 1, DFS Type 0
  358. [ 8.004942] Chan 112: power 0 dBm, DFS 1, DFS Type 0
  359. [ 8.004951] Chan 116: power 0 dBm, DFS 1, DFS Type 0
  360. [ 8.004960] Chan 118: power 0 dBm, DFS 1, DFS Type 0
  361. [ 8.004978] Chan 120: power 0 dBm, DFS 1, DFS Type 0
  362. [ 8.004998] Chan 124: power 0 dBm, DFS 1, DFS Type 0
  363. [ 8.005009] Chan 126: power 0 dBm, DFS 1, DFS Type 0
  364. [ 8.005018] Chan 128: power 0 dBm, DFS 1, DFS Type 0
  365. [ 8.005027] Chan 132: power 0 dBm, DFS 1, DFS Type 0
  366. [ 8.005036] Chan 134: power 0 dBm, DFS 1, DFS Type 0
  367. [ 8.005045] Chan 136: power 0 dBm, DFS 1, DFS Type 0
  368. [ 8.005054] Chan 140: power 0 dBm, DFS 1, DFS Type 0
  369. [ 8.005063] Chan 149: power 0 dBm, DFS 0, DFS Type 0
  370. [ 8.005072] Chan 151: power 0 dBm, DFS 0, DFS Type 0
  371. [ 8.005081] Chan 153: power 0 dBm, DFS 0, DFS Type 0
  372. [ 8.005090] Chan 157: power 0 dBm, DFS 0, DFS Type 0
  373. [ 8.005099] Chan 159: power 0 dBm, DFS 0, DFS Type 0
  374. [ 8.005108] Chan 161: power 0 dBm, DFS 0, DFS Type 0
  375. [ 8.005117] Chan 165: power 0 dBm, DFS 0, DFS Type 0
  376. [ 8.005125] Chan 167 (frq 5835): not allowed!
  377. [ 8.005134] Chan 169 (frq 5845): not allowed!
  378. [ 8.005142] Chan 171 (frq 5855): not allowed!
  379. [ 8.005150] Chan 173 (frq 5865): not allowed!
  380. [ 8.005159] Chan 184 (frq 4920): not allowed!
  381. [ 8.005166] Chan 188 (frq 4940): not allowed!
  382. [ 8.005174] Chan 192 (frq 4960): not allowed!
  383. [ 8.005182] Chan 196 (frq 4980): not allowed!
  384. [ 8.005189] Chan 208 (frq 6040): not allowed!
  385. [ 8.005208] Chan 212 (frq 6060): not allowed!
  386. [ 8.005226] Chan 216 (frq 6080): not allowed!
  387. [ 8.005236] crda> Number of channels = 33
  388. [ 8.006314] 0x1300 = 00064300
  389. [ 8.006329] RTMPDrvSTAOpen(1):Check if PDMA is idle!
  390. [ 8.006714] RTMPDrvSTAOpen(2):Check if PDMA is idle!
  391. [ 8.007485] 80211> CFG80211_OpsPwrMgmt ==>
  392. [ 8.021478] 80211> CFG80211_OpsTxPwrGet ==>
  393. [ 8.022527] 80211> CFG80211_OpsTxPwrGet ==>
  394. [ 8.023775] 80211> CFG80211_OpsTxPwrGet ==>
  395. [ 8.068100] 80211> CFG80211_OpsPmksaFlush ==>
  396. [ 8.157588] 80211> CFG80211_OpsScan ==>
  397. [ 8.319289] random: nonblocking pool is initialized
  398. [ 8.752602] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  399. [ 8.755174] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  400. [ 8.774821] 8021q: 802.1Q VLAN Support v1.8
  401. [ 10.113741] 80211> Can not find any chan info!
  402. [ 11.478227] Console: switching to colour dummy device 80x30
  403. [ 11.578489] 80211> Can not find any chan info!
  404. [ 11.680994] 80211> Can not find any chan info!
  405. [ 13.245843] 80211> cfg80211_scan_done
  406. [ 13.246868] 80211> CFG80211_OpsSurveyGet ==>
  407. [ 13.246897] 80211> busy time = 2132391976 -2135125200
  408. [ 20.032242] 80211> CFG80211_OpsScan ==>
  409. [ 21.992393] 80211> Can not find any chan info!
  410. [ 22.094774] 80211> Can not find any chan info!
  411. [ 23.539820] 80211> Can not find any chan info!
  412. [ 23.559508] 80211> Can not find any chan info!
  413. [ 23.661935] 80211> Can not find any chan info!
  414. [ 25.268176] 80211> cfg80211_scan_done
  415. [ 25.269566] 80211> CFG80211_OpsSurveyGet ==>
  416. [ 25.269600] 80211> busy time = 2132391976 -2135125200
  417. [ 47.032760] 80211> CFG80211_OpsScan ==>
  418. [ 47.379501] 80211> Can not find any chan info!
  419. [ 49.333539] 80211> Can not find any chan info!
  420. [ 50.871324] 80211> Can not find any chan info!
  421. [ 50.900997] 80211> Can not find any chan info!
  422. [ 51.003490] 80211> Can not find any chan info!
  423. [ 52.628862] 80211> cfg80211_scan_done
  424. [ 52.630080] 80211> CFG80211_OpsSurveyGet ==>
  425. [ 52.630118] 80211> busy time = 2132391976 -2135125200
  426. [ 102.564382] 80211> CFG80211_OpsScan ==>
  427. [ 102.886283] 80211> Can not find any chan info!
  428. [ 104.426886] 80211> Can not find any chan info!
  429. [ 105.988657] 80211> Can not find any chan info!
  430. [ 105.993232] 80211> Can not find any chan info!
  431. [ 106.095676] 80211> Can not find any chan info!
  432. [ 107.719346] 80211> cfg80211_scan_done
  433. [ 107.720659] 80211> CFG80211_OpsSurveyGet ==>
  434. [ 107.720695] 80211> busy time = 2132391976 -2135125200
  435. [ 111.030810] 80211> CFG80211_OpsScan ==>
  436. [ 111.369279] 80211> Can not find any chan info!
  437. [ 113.027263] 80211> Can not find any chan info!
  438. [ 114.561062] 80211> Can not find any chan info!
  439. [ 114.594976] 80211> Can not find any chan info!
  440. [ 114.720187] 80211> Can not find any chan info!
  441. [ 116.319071] 80211> cfg80211_scan_done
  442. [ 116.320316] 80211> CFG80211_OpsSurveyGet ==>
  443. [ 116.320357] 80211> busy time = 2132391976 -2135125200
  444. [ 120.030505] 80211> CFG80211_OpsScan ==>
  445. [ 122.141070] 80211> Can not find any chan info!
  446. [ 122.243376] 80211> Can not find any chan info!
  447. [ 123.721162] 80211> Can not find any chan info!
  448. [ 123.722506] 80211> Can not find any chan info!
  449. [ 123.811116] 80211> Can not find any chan info!
  450. [ 125.480950] 80211> cfg80211_scan_done
  451. [ 125.482299] 80211> CFG80211_OpsSurveyGet ==>
  452. [ 125.482352] 80211> busy time = 2132391976 -2135125200
  453. [ 129.721932] 80211> CFG80211_OpsScan ==>
  454. [ 131.971531] 80211> Can not find any chan info!
  455. [ 133.509470] 80211> Can not find any chan info!
  456. [ 133.539122] 80211> Can not find any chan info!
  457. [ 133.641610] 80211> Can not find any chan info!
  458. [ 135.256676] 80211> cfg80211_scan_done
  459. [ 135.258884] 80211> CFG80211_OpsSurveyGet ==>
  460. [ 135.258921] 80211> busy time = 2132391976 -2135125200
  461. [ 138.030812] 80211> CFG80211_OpsScan ==>
  462. [ 139.958817] 80211> Can not find any chan info!
  463. [ 141.741720] 80211> Can not find any chan info!
  464. [ 141.743173] 80211> Can not find any chan info!
  465. [ 141.833765] 80211> Can not find any chan info!
  466. [ 143.487220] 80211> cfg80211_scan_done
  467. [ 143.488441] 80211> CFG80211_OpsSurveyGet ==>
  468. [ 143.488472] 80211> busy time = 2132391976 -2135125200
  469. [ 145.702513] 80211 [CONNECT TEST]> CFG80211_OpsConnect ==>
  470. [ 145.702539] Groupwise: fac04
  471. [ 145.702548] Pairwise fac04
  472. [ 145.702556] Wpa_versions 2
  473. [ 145.702563] Keymgmt fac02
  474. [ 145.702570] Auth_type 0
  475. [ 145.702577] WLAN_CIPHER_SUITE_CCMP...
  476. [ 145.702584] ConnInfo.KeyLen ===> 0
  477. [ 145.702592] ConnInfo.KeyIdx ===> 0
  478. [ 145.702609] 80211> Connect bssid 08:60:6e:bf:52:54
  479. [ 145.702634] 80211> EncrypType = 6
  480. [ 145.758753] PeerBeaconAtJoinAction(): HT-CtrlChannel=40, CentralChannel=>38
  481. [ 145.758776] PeerBeaconAtJoinAction(): Set CentralChannel=38
  482. [ 145.758797] AdjustChannelRelatedValue(): Input BW=1, rf_channel=38, vht_bw=1, Channel=40, vht_cent_ch=42!
  483. [ 145.779867] DETECT SUPPLICANT ENABLED
  484. [ 145.779896] DETECT NATIVE SUPPLICANT ENABLED
  485. [ 145.780978] ASSOC - Send ASSOC request...
  486. [ 145.780998] DETECT SUPPLICANT ENABLED
  487. [ 145.781934] ASSOC - AuthMode = 7
  488. [ 145.781948] ERROR!!! Storing RSS_IE for WPA SM negotiation later
  489. [ 145.781966] AssocPostProc():=> Store RSN_IE for WPA2 SM negotiation
  490. [ 145.781991] DETECT NATIVE SUPPLICANT ENABLED (send len=47)
  491. [ 145.783035] ASSOC - PeerAssocRspAction() connect inform
  492. [ 145.783063] 80211> CFG80211_ConnectResultInform ==>
  493. [ 145.818312] receive cmd msg fail(-71)
  494. [ 145.818427] Bulk In Failed. Status=-71, BIIdx=0x2, BIRIdx=0x2, actual_length= 0x0
  495. [ 145.818483] receive cmd msg fail(-71)
  496. [ 145.818604] receive cmd msg fail(-71)
  497. [ 145.818721] receive cmd msg fail(-71)
  498. [ 145.818838] receive cmd msg fail(-71)
  499. [ 145.818942] receive cmd msg fail(-71)
  500. [ 145.819050] receive cmd msg fail(-71)
  501. [ 145.819161] receive cmd msg fail(-71)
  502. [ 145.819272] receive cmd msg fail(-71)
  503. [ 145.819386] receive cmd msg fail(-71)
  504. [ 145.819505] receive cmd msg fail(-71)
  505. [ 145.819642] receive cmd msg fail(-71)
  506. [ 145.819783] receive cmd msg fail(-71)
  507. [ 145.819891] receive cmd msg fail(-71)
  508. [ 145.819993] receive cmd msg fail(-71)
  509. [ 145.820089] receive cmd msg fail(-71)
  510. [ 145.820196] receive cmd msg fail(-71)
  511. [ 145.820292] receive cmd msg fail(-71)
  512. [ 145.820392] receive cmd msg fail(-71)
  513. [ 145.820495] receive cmd msg fail(-71)
  514. [ 145.820590] receive cmd msg fail(-71)
  515. [ 145.820683] receive cmd msg fail(-71)
  516. [ 145.820776] receive cmd msg fail(-71)
  517. [ 145.820868] receive cmd msg fail(-71)
  518. [ 145.820964] receive cmd msg fail(-71)
  519. [ 145.821057] receive cmd msg fail(-71)
  520. [ 145.821151] receive cmd msg fail(-71)
  521. [ 145.821243] receive cmd msg fail(-71)
  522. [ 145.821341] receive cmd msg fail(-71)
  523. [ 145.821433] receive cmd msg fail(-71)
  524. [ 145.821524] receive cmd msg fail(-71)
  525. [ 145.821625] receive cmd msg fail(-71)
  526. [ 145.821731] receive cmd msg fail(-71)
  527. [ 145.821848] receive cmd msg fail(-71)
  528. [ 145.821964] receive cmd msg fail(-71)
  529. [ 145.822059] receive cmd msg fail(-71)
  530. [ 145.822157] receive cmd msg fail(-71)
  531. [ 145.822257] receive cmd msg fail(-71)
  532. [ 145.822368] receive cmd msg fail(-71)
  533. [ 145.822466] receive cmd msg fail(-71)
  534. [ 145.822559] receive cmd msg fail(-71)
  535. [ 145.822652] receive cmd msg fail(-71)
  536. [ 145.822745] receive cmd msg fail(-71)
  537. [ 145.822841] receive cmd msg fail(-71)
  538. [ 145.822933] receive cmd msg fail(-71)
  539. [ 145.823026] receive cmd msg fail(-71)
  540. [ 145.823122] receive cmd msg fail(-71)
  541. [ 145.823228] receive cmd msg fail(-71)
  542. [ 145.823338] receive cmd msg fail(-71)
  543. [ 145.823434] receive cmd msg fail(-71)
  544. [ 145.823525] receive cmd msg fail(-71)
  545. [ 145.823625] receive cmd msg fail(-71)
  546. [ 145.823731] receive cmd msg fail(-71)
  547. [ 145.823840] receive cmd msg fail(-71)
  548. [ 145.823934] receive cmd msg fail(-71)
  549. [ 145.824029] receive cmd msg fail(-71)
  550. [ 145.824127] receive cmd msg fail(-71)
  551. [ 145.824238] receive cmd msg fail(-71)
  552. [ 145.824342] receive cmd msg fail(-71)
  553. [ 145.824453] receive cmd msg fail(-71)
  554. [ 145.824544] receive cmd msg fail(-71)
  555. [ 145.824646] receive cmd msg fail(-71)
  556. [ 145.824748] receive cmd msg fail(-71)
  557. [ 145.824858] receive cmd msg fail(-71)
  558. [ 145.824968] receive cmd msg fail(-71)
  559. [ 145.825078] receive cmd msg fail(-71)
  560. [ 145.825169] receive cmd msg fail(-71)
  561. [ 145.825270] receive cmd msg fail(-71)
  562. [ 145.825372] receive cmd msg fail(-71)
  563. [ 145.825464] receive cmd msg fail(-71)
  564. [ 145.825555] receive cmd msg fail(-71)
  565. [ 145.825653] receive cmd msg fail(-71)
  566. [ 145.825747] receive cmd msg fail(-71)
  567. [ 145.825842] receive cmd msg fail(-71)
  568. [ 145.825950] receive cmd msg fail(-71)
  569. [ 145.826041] receive cmd msg fail(-71)
  570. [ 145.826145] receive cmd msg fail(-71)
  571. [ 145.826244] receive cmd msg fail(-71)
  572. [ 145.826342] receive cmd msg fail(-71)
  573. [ 145.826453] receive cmd msg fail(-71)
  574. [ 145.826547] receive cmd msg fail(-71)
  575. [ 145.826649] receive cmd msg fail(-71)
  576. [ 145.826746] receive cmd msg fail(-71)
  577. [ 145.826840] receive cmd msg fail(-71)
  578. [ 145.826934] receive cmd msg fail(-71)
  579. [ 145.827031] receive cmd msg fail(-71)
  580. [ 145.827286] receive cmd msg fail(-71)
  581. [ 145.827380] receive cmd msg fail(-71)
  582. [ 145.827502] receive cmd msg fail(-71)
  583. [ 145.827628] receive cmd msg fail(-71)
  584. [ 145.827754] receive cmd msg fail(-71)
  585. [ 145.827904] receive cmd msg fail(-71)
  586. [ 145.828012] receive cmd msg fail(-71)
  587. [ 145.828124] receive cmd msg fail(-71)
  588. [ 145.828233] receive cmd msg fail(-71)
  589. [ 145.828340] receive cmd msg fail(-71)
  590. [ 145.828453] receive cmd msg fail(-71)
  591. [ 145.828545] receive cmd msg fail(-71)
  592. [ 145.828684] receive cmd msg fail(-71)
  593. [ 145.828706] #
  594. [ 145.828780] receive cmd msg fail(-71)
  595. [ 145.828873] receive cmd msg fail(-71)
  596. [ 145.828979] receive cmd msg fail(-71)
  597. [ 145.829089] receive cmd msg fail(-71)
  598. [ 145.829182] receive cmd msg fail(-71)
  599. [ 145.829284] receive cmd msg fail(-71)
  600. [ 145.829387] receive cmd msg fail(-71)
  601. [ 145.829494] receive cmd msg fail(-71)
  602. [ 145.829594] receive cmd msg fail(-71)
  603. [ 145.829700] receive cmd msg fail(-71)
  604. [ 145.829794] receive cmd msg fail(-71)
  605. [ 145.829897] receive cmd msg fail(-71)
  606. [ 145.829994] receive cmd msg fail(-71)
  607. [ 145.830094] receive cmd msg fail(-71)
  608. [ 145.830186] receive cmd msg fail(-71)
  609. [ 145.830276] receive cmd msg fail(-71)
  610. [ 145.830373] receive cmd msg fail(-71)
  611. [ 145.830481] receive cmd msg fail(-71)
  612. [ 145.830589] receive cmd msg fail(-71)
  613. [ 145.830684] receive cmd msg fail(-71)
  614. [ 145.830779] receive cmd msg fail(-71)
  615. [ 145.830873] receive cmd msg fail(-71)
  616. [ 145.830983] receive cmd msg fail(-71)
  617. [ 145.831093] receive cmd msg fail(-71)
  618. [ 145.831187] receive cmd msg fail(-71)
  619. [ 145.831281] receive cmd msg fail(-71)
  620. [ 145.831372] receive cmd msg fail(-71)
  621. [ 145.831468] receive cmd msg fail(-71)
  622. [ 145.831594] receive cmd msg fail(-71)
  623. [ 145.831718] receive cmd msg fail(-71)
  624. [ 145.831851] receive cmd msg fail(-71)
  625. [ 145.832035] receive cmd msg fail(-71)
  626. [ 145.832166] receive cmd msg fail(-71)
  627. [ 145.832248] receive cmd msg fail(-71)
  628. [ 145.832433] receive cmd msg fail(-71)
  629. [ 145.832514] receive cmd msg fail(-71)
  630. [ 145.832641] receive cmd msg fail(-71)
  631. [ 145.832771] receive cmd msg fail(-71)
  632. [ 145.832880] receive cmd msg fail(-71)
  633. [ 145.832897] usb_rx_cmd_msg_complete:submit urb fail(-19)
  634. [ 145.832981] usb 1-1.2: USB disconnect, device number 4
  635. [ 145.833008] receive cmd msg fail(-71)
  636. [ 145.833025] usb_rx_cmd_msg_complete:submit urb fail(-19)
  637. [ 145.833047] usb_rx_cmd_msg_submit:submit urb fail(-19)
  638. [ 145.833700] rtusb_disconnect ENTER
  639. [ 145.833716] rt2870_disconnect(): CMD_RTPRIV_IOCTL_STA_SIOCSIWAP(00:00:00:00:00:00)
  640. [ 145.833765] #
  641. [ 145.833794] RTUSB_VendorRequest failed(-19),TxFlags=0x0, ReqType=IN, Req=0x7, Idx=0x1000,pAd->Flags=0x31080102
  642. [ 145.833796] #
  643. [ 145.833808] RTUSB_VendorRequest failed(-19),TxFlags=0x0, ReqType=OUT, Req=0x6, Idx=0x1300,pAd->Flags=0x31080102
  644. [ 145.833813] VendrCmdMultiWrite_nBytes failed!
  645. [ 145.833818] WIFI device has been disconnected
  646. [ 145.833822] VendrCmdMultiWrite_nBytes failed!
  647. [ 145.833826] WIFI device has been disconnected
  648. [ 145.833832] VendrCmdMultiWrite_nBytes failed!
  649. [ 145.833836] WIFI device has been disconnected
  650. [ 145.833839] VendrCmdMultiWrite_nBytes failed!
  651. [ 145.833846] WIFI device has been disconnected
  652. [ 145.833850] VendrCmdMultiWrite_nBytes failed!
  653. [ 145.833854] WIFI device has been disconnected
  654. [ 145.833858] VendrCmdMultiWrite_nBytes failed!
  655. [ 145.833863] WIFI device has been disconnected
  656. [ 145.833872] VendrCmdMultiWrite_nBytes failed!
  657. [ 145.833876] WIFI device has been disconnected
  658. [ 145.833880] VendrCmdMultiWrite_nBytes failed!
  659. [ 145.833884] WIFI device has been disconnected
  660. [ 145.833891] VendrCmdMultiWrite_nBytes failed!
  661. [ 145.833898] WIFI device has been disconnected
  662. [ 145.833902] WIFI device has been disconnected
  663. [ 145.833906] VendrCmdMultiWrite_nBytes failed!
  664. [ 145.833915] CMDTHREAD_RESET_BULK_IN: Cannot do bulk in because flags(0x31080102) on !
  665. [ 146.307197] command (31) timeout(500ms)
  666. [ 146.307224] txq qlen = 0
  667. [ 146.307232] rxq qlen = 0
  668. [ 146.307240] kickq qlen = 0
  669. [ 146.307247] ackq qlen = 1
  670. [ 146.307254] tx_doneq.qlen = 0
  671. [ 146.307262] rx_done qlen = 1
  672. [ 146.307272] msg->retransmit_times = 2
  673. [ 146.307342] WIFI device has been disconnected
  674. [ 146.307352] WIFI device has been disconnected
  675. [ 146.307361] VendrCmdMultiWrite_nBytes failed!
  676. [ 146.307368] WIFI device has been disconnected
  677. [ 146.307374] WIFI device has been disconnected
  678. [ 146.307380] VendrCmdMultiWrite_nBytes failed!
  679. [ 146.307389] WIFI device has been disconnected
  680. [ 146.307395] WIFI device has been disconnected
  681. [ 146.307402] VendrCmdMultiWrite_nBytes failed!
  682. [ 146.307410] WIFI device has been disconnected
  683. [ 146.307417] WIFI device has been disconnected
  684. [ 146.307423] VendrCmdMultiWrite_nBytes failed!
  685. [ 146.307430] WIFI device has been disconnected
  686. [ 146.307436] WIFI device has been disconnected
  687. [ 146.307443] VendrCmdMultiWrite_nBytes failed!
  688. [ 146.307449] WIFI device has been disconnected
  689. [ 146.307469] WIFI device has been disconnected
  690. [ 146.307477] VendrCmdMultiWrite_nBytes failed!
  691. [ 146.307484] WIFI device has been disconnected
  692. [ 146.307490] VendrCmdMultiWrite_nBytes failed!
  693. [ 146.307496] WIFI device has been disconnected
  694. [ 146.307502] VendrCmdMultiWrite_nBytes failed!
  695. [ 146.307508] WIFI device has been disconnected
  696. [ 146.307515] VendrCmdMultiWrite_nBytes failed!
  697. [ 146.307521] WIFI device has been disconnected
  698. [ 146.307527] VendrCmdMultiWrite_nBytes failed!
  699. [ 146.307534] WIFI device has been disconnected
  700. [ 146.307540] VendrCmdMultiWrite_nBytes failed!
  701. [ 146.307546] WIFI device has been disconnected
  702. [ 146.307553] VendrCmdMultiWrite_nBytes failed!
  703. [ 146.307559] WIFI device has been disconnected
  704. [ 146.307566] WIFI device has been disconnected
  705. [ 146.307572] VendrCmdMultiWrite_nBytes failed!
  706. [ 146.307581] WIFI device has been disconnected
  707. [ 146.307587] WIFI device has been disconnected
  708. [ 146.307593] VendrCmdMultiWrite_nBytes failed!
  709. [ 146.307600] WIFI device has been disconnected
  710. [ 146.307606] WIFI device has been disconnected
  711. [ 146.307612] VendrCmdMultiWrite_nBytes failed!
  712. [ 146.307621] WIFI device has been disconnected
  713. [ 146.307627] VendrCmdMultiWrite_nBytes failed!
  714. [ 146.307657] LOST_AP_INFORM
  715. [ 146.307682] rtusb_disconnect: unregister usbnet usb-3f980000.usb-1.2
  716. [ 146.307707] ===> rt28xx_close
  717. [ 146.307751] 80211> CFG80211_OpsKeyDel ==>
  718. [ 146.307764] 80211> CFG80211_OpsKeyDel ==>
  719. [ 146.307773] 80211> CFG80211_OpsKeyDel ==>
  720. [ 146.307780] 80211> CFG80211_OpsKeyDel ==>
  721. [ 146.307788] 80211> CFG80211_OpsKeyDel ==>
  722. [ 146.307795] 80211> CFG80211_OpsKeyDel ==>
  723. [ 146.310013] WIFI device has been disconnected
  724. [ 146.310035] VendrCmdMultiWrite_nBytes failed!
  725. [ 146.310043] WIFI device has been disconnected
  726. [ 146.310050] VendrCmdMultiWrite_nBytes failed!
  727. [ 146.327464] WIFI device has been disconnected
  728. [ 146.327557] WIFI device has been disconnected
  729. [ 146.327567] WIFI device has been disconnected
  730. [ 146.327574] WIFI device has been disconnected
  731. [ 146.327730] tx_kickout_fail_count = 0
  732. [ 146.327742] tx_timeout_fail_count = 1
  733. [ 146.327752] rx_receive_fail_count = 142
  734. [ 146.327759] alloc_cmd_msg = 46903
  735. [ 146.327766] free_cmd_msg = 46903
  736. [ 146.418225] <=== rt28xx_close
  737. [ 146.418274] RtmpOSNetDevDetach: enter
  738. [ 146.418283] RtmpOSNetDevDetach: unregister_netdev
  739. [ 146.507372] 80211> unregister/free wireless device
  740. [ 146.547767] WIFI device has been disconnected
  741. [ 146.547804] ==>RT65xx_WLAN_ChipOnOff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0xff000003, Reg-WlanFunCtrl=0xffffffff
  742. [ 146.547821] WIFI device has been disconnected
  743. [ 146.547828] VendrCmdMultiWrite_nBytes failed!
  744. [ 146.547859] WIFI device has been disconnected
  745. [ 146.548175] ---> RTMPFreeTxRxRingMemory
  746. [ 146.548269] <--- RTMPFreeTxRxRingMemory
  747. [ 146.548537] RTUSB disconnect successfully
  748. [ 146.787234] usb 1-1.2: new high-speed USB device number 5 using dwc_otg
  749. [ 146.902736] usb 1-1.2: New USB device found, idVendor=0e8d, idProduct=7610
  750. [ 146.902780] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  751. [ 146.902795] usb 1-1.2: Product: WiFi
  752. [ 146.902807] usb 1-1.2: Manufacturer: MediaTek
  753. [ 146.902818] usb 1-1.2: SerialNumber: 1.0
  754. [ 146.905254]
  755.  
  756. === pAd = b1fe8000, size = 859128 ===
  757.  
  758. [ 146.905329] <-- RTMPAllocTxRxRingMemory, Status=0
  759. [ 146.905486] <-- RTMPAllocAdapterBlock, Status=0
  760. [ 146.905757] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
  761. [ 146.906992] MCUType = 2
  762. [ 146.907398] NVM is EFUSE
  763. [ 146.907413] Endpoint(8) is for In-band Command
  764. [ 146.907424] Endpoint(4) is for WMM0 AC0
  765. [ 146.907432] Endpoint(5) is for WMM0 AC1
  766. [ 146.907440] Endpoint(6) is for WMM0 AC2
  767. [ 146.907447] Endpoint(7) is for WMM0 AC3
  768. [ 146.907455] Endpoint(9) is for WMM1 AC0
  769. [ 146.907463] Endpoint(84) is for Data-In
  770. [ 146.907470] Endpoint(85) is for Command Rsp
  771. [ 146.907734] 80211> RFICType = 3
  772. [ 146.907751] 80211> Number of channel = 44
  773. [ 146.907761] 80211> Number of rate = 12
  774. [ 146.907768] 80211> CurTxPower = 0 dBm
  775. [ 146.907779] 80211> TxStream = 0
  776. [ 146.908078] crda> requlation requestion by core: 00
  777. [ 146.908444] 80211> CFG80211_Register
  778. [ 146.918149] -->RTUSBVenderReset
  779. [ 146.918302] <--RTUSBVenderReset
  780. [ 146.927291] fw version:0.1.00 build:7640
  781. [ 146.927322] build time:201308221655____
  782. [ 146.927374] ilm length = 68780(bytes)
  783. [ 146.927388] dlm length = 11476(bytes)
  784. [ 146.957185] #
  785. [ 146.963286] loading fw......
  786. [ 147.037260] #
  787. [ 147.257865] RTMP_TimerListAdd: add timer obj b2066f8c!
  788. [ 147.257907] RTMP_TimerListAdd: add timer obj b2066fd4!
  789. [ 147.257918] RTMP_TimerListAdd: add timer obj b206701c!
  790. [ 147.257932] RTMP_TimerListAdd: add timer obj b2066f44!
  791. [ 147.257945] RTMP_TimerListAdd: add timer obj b2066e6c!
  792. [ 147.257954] RTMP_TimerListAdd: add timer obj b2066eb4!
  793. [ 147.257964] RTMP_TimerListAdd: add timer obj b1ffac34!
  794. [ 147.257973] RTMP_TimerListAdd: add timer obj b1fea03c!
  795. [ 147.257983] RTMP_TimerListAdd: add timer obj b1fea088!
  796. [ 147.257996] RTMP_TimerListAdd: add timer obj b1ffad1c!
  797. [ 147.258010] RTMP_TimerListAdd: add timer obj b1ffaba4!
  798. [ 147.258027] RTMP_TimerListAdd: add timer obj b1ffacd4!
  799. [ 147.258064] Loading default parameter profile
  800. [ 147.258084] cfg_mode=12
  801. [ 147.258101] wmode_band_equal(): Band Not Equal!
  802. [ 147.258212] no file read method, using vfs_read
  803. [ 147.258514] cfg_mode=8
  804. [ 147.258529] wmode_band_equal(): Band Not Equal!
  805. [ 147.259115] Key1Str is Invalid key length(0) or Type(0)
  806. [ 147.259178] Key2Str is Invalid key length(0) or Type(0)
  807. [ 147.259239] Key3Str is Invalid key length(0) or Type(0)
  808. [ 147.259302] Key4Str is Invalid key length(0) or Type(0)
  809. [ 147.260499] 1. Phy Mode = 17
  810. [ 147.260510] 2. Phy Mode = 17
  811. [ 147.260520] NVM is Efuse and its size =1d[1e0-1fc]
  812. [ 147.271704] /mnt/package/kernel-osmc/src/linux-4.4.8/drivers/net/wireless/mt7610u/os/linux/../../chips/mt76x0.c:2114 assert (pAd->TxPower[choffset].Channel == 36)failed
  813. [ 147.282589] ERROR!!! E2PROM: WRONG VERSION 0x2, should be 1
  814. [ 147.286502] mt76x0_read_tx_alc_info_from_eeprom: EEPROM_MT76x0_TEMPERATURE_OFFSET (0xD1) = 0xfb
  815. [ 147.286515] mt76x0_read_tx_alc_info_from_eeprom: TemperatureOffset = 0xfffffffb
  816. [ 147.286523] Temperature Tx ALC not enabled
  817. [ 147.301614] 3. Phy Mode = 17
  818. [ 147.301640] AntCfgInit: primary/secondary ant 0/1
  819. [ 147.307011] RTMPSetPhyMode: channel is out of range, use first channel=36
  820. [ 147.308617] MCS Set = ff 00 00 00 01
  821. [ 147.318691] <==== rt28xx_init, Status=0
  822. [ 147.318704] 80211> re-init bands...
  823. [ 147.318844] 80211> re-init bands...
  824. [ 147.318856] 80211> RFICType = 3
  825. [ 147.318864] 80211> Number of channel = 44
  826. [ 147.318872] 80211> Number of rate = 12
  827. [ 147.318880] 80211> CurTxPower = 0 dBm
  828. [ 147.318892] 80211> TxStream = 1
  829. [ 147.318900] crda> CFG80211_RegRuleApply ==>
  830. [ 147.318909] crda> reset chan/power for 2.4GHz
  831. [ 147.318921] crda> reset chan/power for 5GHz
  832. [ 147.318932] Chan 036: power 0 dBm, DFS 0, DFS Type 0
  833. [ 147.318942] Chan 038: power 0 dBm, DFS 0, DFS Type 0
  834. [ 147.318952] Chan 040: power 0 dBm, DFS 0, DFS Type 0
  835. [ 147.318961] Chan 044: power 0 dBm, DFS 0, DFS Type 0
  836. [ 147.318970] Chan 046: power 0 dBm, DFS 0, DFS Type 0
  837. [ 147.318979] Chan 048: power 0 dBm, DFS 0, DFS Type 0
  838. [ 147.318988] Chan 052: power 0 dBm, DFS 1, DFS Type 0
  839. [ 147.318997] Chan 054: power 0 dBm, DFS 1, DFS Type 0
  840. [ 147.319007] Chan 056: power 0 dBm, DFS 1, DFS Type 0
  841. [ 147.319016] Chan 060: power 0 dBm, DFS 1, DFS Type 0
  842. [ 147.319025] Chan 062: power 0 dBm, DFS 1, DFS Type 0
  843. [ 147.319033] Chan 064: power 0 dBm, DFS 1, DFS Type 0
  844. [ 147.319042] Chan 100: power 0 dBm, DFS 1, DFS Type 0
  845. [ 147.319051] Chan 104: power 0 dBm, DFS 1, DFS Type 0
  846. [ 147.319060] Chan 108: power 0 dBm, DFS 1, DFS Type 0
  847. [ 147.319069] Chan 112: power 0 dBm, DFS 1, DFS Type 0
  848. [ 147.319078] Chan 116: power 0 dBm, DFS 1, DFS Type 0
  849. [ 147.319087] Chan 118: power 0 dBm, DFS 1, DFS Type 0
  850. [ 147.319096] Chan 120: power 0 dBm, DFS 1, DFS Type 0
  851. [ 147.319105] Chan 124: power 0 dBm, DFS 1, DFS Type 0
  852. [ 147.319113] Chan 126: power 0 dBm, DFS 1, DFS Type 0
  853. [ 147.319122] Chan 128: power 0 dBm, DFS 1, DFS Type 0
  854. [ 147.319133] Chan 132: power 0 dBm, DFS 1, DFS Type 0
  855. [ 147.319142] Chan 134: power 0 dBm, DFS 1, DFS Type 0
  856. [ 147.319151] Chan 136: power 0 dBm, DFS 1, DFS Type 0
  857. [ 147.319159] Chan 140: power 0 dBm, DFS 1, DFS Type 0
  858. [ 147.319168] Chan 149: power 0 dBm, DFS 0, DFS Type 0
  859. [ 147.319177] Chan 151: power 0 dBm, DFS 0, DFS Type 0
  860. [ 147.319186] Chan 153: power 0 dBm, DFS 0, DFS Type 0
  861. [ 147.319195] Chan 157: power 0 dBm, DFS 0, DFS Type 0
  862. [ 147.319204] Chan 159: power 0 dBm, DFS 0, DFS Type 0
  863. [ 147.319213] Chan 161: power 0 dBm, DFS 0, DFS Type 0
  864. [ 147.319223] Chan 165: power 0 dBm, DFS 0, DFS Type 0
  865. [ 147.319231] Chan 167 (frq 5835): not allowed!
  866. [ 147.319238] Chan 169 (frq 5845): not allowed!
  867. [ 147.319246] Chan 171 (frq 5855): not allowed!
  868. [ 147.319255] Chan 173 (frq 5865): not allowed!
  869. [ 147.319263] Chan 184 (frq 4920): not allowed!
  870. [ 147.319270] Chan 188 (frq 4940): not allowed!
  871. [ 147.319278] Chan 192 (frq 4960): not allowed!
  872. [ 147.319286] Chan 196 (frq 4980): not allowed!
  873. [ 147.319294] Chan 208 (frq 6040): not allowed!
  874. [ 147.319301] Chan 212 (frq 6060): not allowed!
  875. [ 147.319309] Chan 216 (frq 6080): not allowed!
  876. [ 147.319317] crda> Number of channels = 33
  877. [ 147.321130] 0x1300 = 00064300
  878. [ 147.321140] RTMPDrvSTAOpen(1):Check if PDMA is idle!
  879. [ 147.321265] RTMPDrvSTAOpen(2):Check if PDMA is idle!
  880. [ 147.322119] 80211> CFG80211_OpsPwrMgmt ==>
  881. [ 147.326354] 80211> CFG80211_OpsTxPwrGet ==>
  882. [ 147.327527] 80211> CFG80211_OpsTxPwrGet ==>
  883. [ 147.328663] 80211> CFG80211_OpsTxPwrGet ==>
  884. [ 147.367997] 80211> CFG80211_OpsPmksaFlush ==>
  885. [ 147.435084] 80211> CFG80211_OpsScan ==>
  886. [ 149.379742] 80211> Can not find any chan info!
  887. [ 150.887432] 80211> Can not find any chan info!
  888. [ 150.947290] 80211> Can not find any chan info!
  889. [ 152.590820] 80211> cfg80211_scan_done
  890. [ 152.592317] 80211> CFG80211_OpsSurveyGet ==>
  891. [ 152.592357] 80211> busy time = 2132391976 -2135125200
  892. [ 156.738195] 80211> CFG80211_OpsScan ==>
  893. [ 158.903063] 80211> Can not find any chan info!
  894. [ 160.491065] 80211> Can not find any chan info!
  895. [ 160.573517] 80211> Can not find any chan info!
  896. [ 162.250069] 80211> cfg80211_scan_done
  897. [ 162.251582] 80211> CFG80211_OpsSurveyGet ==>
  898. [ 162.251622] 80211> busy time = 2132391976 -2135125200
  899. [ 165.030562] 80211> CFG80211_OpsScan ==>
  900. [ 166.992783] 80211> Can not find any chan info!
  901. [ 167.095230] 80211> Can not find any chan info!
  902. [ 168.892370] 80211> Can not find any chan info!
  903. [ 168.970426] 80211> Can not find any chan info!
  904. [ 170.648909] 80211> cfg80211_scan_done
  905. [ 170.650391] 80211> CFG80211_OpsSurveyGet ==>
  906. [ 170.650431] 80211> busy time = 2132391976 -2135125200
  907. [ 174.031746] 80211> CFG80211_OpsScan ==>
  908. [ 176.106506] 80211> Can not find any chan info!
  909. [ 177.572765] 80211> Can not find any chan info!
  910. [ 177.574056] 80211> Can not find any chan info!
  911. [ 177.674535] 80211> Can not find any chan info!
  912. [ 179.560544] 80211> cfg80211_scan_done
  913. [ 179.561967] 80211> CFG80211_OpsSurveyGet ==>
  914. [ 179.562006] 80211> busy time = 2132391976 -2135125200
  915. [ 183.695642] 80211> CFG80211_OpsScan ==>
  916. [ 185.732196] 80211> Can not find any chan info!
  917. [ 187.172733] 80211> Can not find any chan info!
  918. [ 187.197733] 80211> Can not find any chan info!
  919. [ 187.300202] 80211> Can not find any chan info!
  920. [ 189.249066] 80211> cfg80211_scan_done
  921. [ 189.250412] 80211> CFG80211_OpsSurveyGet ==>
  922. [ 189.250453] 80211> busy time = 2132391976 -2135125200
  923. [ 192.031271] 80211> CFG80211_OpsScan ==>
  924. [ 194.026805] 80211> Can not find any chan info!
  925. [ 195.580738] 80211> Can not find any chan info!
  926. [ 195.594626] 80211> Can not find any chan info!
  927. [ 195.697067] 80211> Can not find any chan info!
  928. [ 197.338702] 80211> cfg80211_scan_done
  929. [ 197.340028] 80211> CFG80211_OpsSurveyGet ==>
  930. [ 197.340068] 80211> busy time = 2132391976 -2135125200
  931. [ 201.031309] 80211> CFG80211_OpsScan ==>
  932. [ 202.935646] 80211> Can not find any chan info!
  933. [ 203.038075] 80211> Can not find any chan info!
  934. [ 204.531309] 80211> Can not find any chan info!
  935. [ 204.605955] 80211> Can not find any chan info!
  936. [ 206.289698] 80211> cfg80211_scan_done
  937. [ 206.291314] 80211> CFG80211_OpsSurveyGet ==>
  938. [ 206.291352] 80211> busy time = 2132391976 -2135125200
  939. [ 210.424522] 80211> CFG80211_OpsScan ==>
  940. [ 213.971433] 80211> Can not find any chan info!
  941. [ 214.026836] 80211> Can not find any chan info!
  942. [ 215.729876] 80211> cfg80211_scan_done
  943. [ 215.731459] 80211> CFG80211_OpsSurveyGet ==>
  944. [ 215.731494] 80211> busy time = 2132391976 -2135125200
  945. [ 219.031729] 80211> CFG80211_OpsScan ==>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement