API tools faq
paste
nospamdan

Skyrocket SlimLP dmesg2

nospamdan
Jan 11th, 2015
192
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 48.44 KB | None | 0 0
raw download clone embed print report
  1. ~ # dmesg
  2. dmesg
  3. <6>[ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0
  4. <6>[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
  5. <5>[ 0.000000] [0: swapper: 0] Linux version 3.0.101-cyanogenmod-g2389f31-dirty (root@ubuntu) (gcc version 4.7 (GC
  6. 25:02 CEST 2014
  7. <4>[ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  8. <4>[ 0.000000] [0: swapper: 0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  9. <4>[ 0.000000] [0: swapper: 0] Machine: QCT MSM8X60 FUSION FFA
  10. <6>[ 0.000000] [0: swapper: 0] memory pool 0 (start 38000000 size 600000) initialized
  11. <6>[ 0.000000] [0: swapper: 0] memory pool 1 (start 38600000 size 3802000) initialized
  12. <6>[ 0.000000] [0: swapper: 0] memory pool 3 (start 78f00000 size 7100000) initialized
  13. <4>[ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc
  14. <6>[ 0.000000] [0: swapper: 0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_plat_ve
  15. <6>[ 0.000000] [0: swapper: 0] accessory_chip=0 hw_plat_subtype=0
  16. <6>[ 0.000000] [0: swapper: 0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
  17. <7>[ 0.000000] [0: swapper: 0] On node 0 totalpages: 211200
  18. <7>[ 0.000000] [0: swapper: 0] free_area_init_node: node 0, pgdat c0cf2da0, node_mem_map c177b000
  19. <7>[ 0.000000] [0: swapper: 0] Normal zone: 992 pages used for memmap
  20. <7>[ 0.000000] [0: swapper: 0] Normal zone: 0 pages reserved
  21. <7>[ 0.000000] [0: swapper: 0] Normal zone: 105248 pages, LIFO batch:31
  22. <7>[ 0.000000] [0: swapper: 0] HighMem zone: 1048 pages used for memmap
  23. <7>[ 0.000000] [0: swapper: 0] HighMem zone: 103912 pages, LIFO batch:31
  24. <6>[ 0.000000] [0: swapper: 0] allocating 12906496 bytes at c7c00000 (48000000 physical) for fb
  25. <6>[ 0.000000] [0: swapper: 0] PERCPU: Embedded 8 pages/cpu @c8852000 s10144 r8192 d14432 u32768
  26. <7>[ 0.000000] [0: swapper: 0] pcpu-alloc: s10144 r8192 d14432 u32768 alloc=8*4096
  27. <7>[ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1
  28. <4>[ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 209160
  29. <5>[ 0.000000] [0: swapper: 0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_su
  30. @0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debu
  31. ev=13 androidboot.emmc=true androidboot.serialno=f3ae2762 androidboot.baseband=csfb
  32. <0>[ 0.000000] [0: swapper: 0] (sec_dbg_setup)
  33. <0>[ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c
  34. <0>[ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
  35. <4>[ 0.000000] hw_rev_setup : HW rev value is intialized first
  36. <4>[ 0.000000] HW rev value : 0xD
  37. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  38. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  39. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  40. <6>[ 0.000000] allocated 4177920 bytes of page_cgroup
  41. <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  42. <6>[ 0.000000] Memory: 43MB 760MB 22MB = 825MB total
  43. <5>[ 0.000000] Memory: 795796k/795796k available, 165740k reserved, 419840K highmem
  44. <5>[ 0.000000] Virtual kernel memory layout:
  45. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  46. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  47. <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  48. <5>[ 0.000000] vmalloc : 0xdf800000 - 0xfa000000 ( 424 MB)
  49. <5>[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
  50. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  51. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  52. <5>[ 0.000000] .init : 0xc0008000 - 0xc004d000 ( 276 kB)
  53. <5>[ 0.000000] .text : 0xc0100000 - 0xc0b79d84 (10728 kB)
  54. <5>[ 0.000000] .data : 0xc0c00000 - 0xc0cf5580 ( 982 kB)
  55. <5>[ 0.000000] .bss : 0xc0cf55a4 - 0xc1358428 (6540 kB)
  56. <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  57. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  58. <6>[ 0.000000] NR_IRQS:855
  59. <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  60. <6>[ 0.000000] Console: colour dummy device 80x30
  61. <6>[ 0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67655)
  62. <6>[ 0.150207] pid_max: default: 32768 minimum: 301
  63. <6>[ 0.150573] Security Framework initialized
  64. <6>[ 0.150604] SELinux: Initializing.
  65. <7>[ 0.150665] SELinux: Starting in permissive mode
  66. <6>[ 0.150848] Mount-cache hash table entries: 512
  67. <6>[ 0.152252] Initializing cgroup subsys cpuacct
  68. <6>[ 0.152343] Initializing cgroup subsys memory
  69. <6>[ 0.152435] Initializing cgroup subsys freezer
  70. <6>[ 0.152496] CPU: Testing write buffer coherency: ok
  71. <6>[ 0.152862] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  72. <4>[ 0.185455] CPU1: Booted secondary processor
  73. <6>[ 0.195343] Brought up 2 CPUs
  74. <6>[ 0.195373] SMP: Total of 2 processors activated (27.06 BogoMIPS).
  75. <6>[ 0.210815] print_constraints: dummy:
  76. <3>[ 0.210937] rdev_init_debugfs: Error-Bad Function Input
  77. <6>[ 0.211273] NET: Registered protocol family 16
  78. <3>[ 0.211486] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  79. <6>[ 0.213714] (sec_get_lpm_mode) 1a2b3c00
  80. <0>[ 0.213745] (sec_get_lpm_mode) 0
  81. <0>[ 0.213745] (sec_debug_init)
  82. <0>[ 0.213775] (sec_debug_init) reset_reason : 0x1a2b3c00
  83. <6>[ 0.213775] msm_rpm_init: RPM firmware 2.0.4196187
  84. <6>[ 0.214569] saw_probe: id=0, name=8901_s0
  85. <6>[ 0.215026] saw_probe: id=1, name=8901_s1
  86. <6>[ 0.216674] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
  87. <6>[ 0.216705] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
  88. <6>[ 0.216735] rcg_clk_handoff: sdc1_clk rate=48000000
  89. <6>[ 0.216796] rcg_clk_handoff: dsi_byte_clk rate=1
  90. <6>[ 0.216857] rcg_clk_handoff: mdp_clk rate=200000000
  91. <6>[ 0.216949] rcg_clk_handoff: pixel_mdp_clk rate=27400000
  92. <6>[ 0.219024] ACPU PVS: Slow
  93. <6>[ 0.219024] Max ACPU freq: 1512000 KHz
  94. <6>[ 0.225036] CPU0: 23 scaling frequencies supported.
  95. <6>[ 0.225067] CPU1: 23 scaling frequencies supported.
  96. <3>[ 0.225616] LTE_switch_init!
  97. <3>[ 0.225677] LTE_switch_init end!
  98. <6>[ 0.227142] pm8058_probe: PMIC revision: E3
  99. <6>[ 0.228485] pm_gpio_probe: OK: base=173, ngpio=40
  100. <6>[ 0.228668] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  101. <6>[ 0.230041] pm8901_probe: PMIC REVISION = F4
  102. <6>[ 0.230499] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  103. <6>[ 0.245574] ram_console: got buffer at 77800000, size 100000
  104. <6>[ 0.245727] ram_console: uncorrectable error in header
  105. <6>[ 0.245727] ram_console: no valid data in buffer (sig = 0xc0474244)
  106. <6>[ 0.254058] console [ram-1] enabled
  107. <3>[ 0.255523] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
  108. <3>[ 0.256134] msm_snddev_init
  109. <3>[ 0.256622] msm_snddev_init snd_devices_celox - config
  110. <4>[ 0.267272] [TSP] Power Down S to discharge for unexpected leackage current
  111. <6>[ 0.267700] msm8x60_multi_sdio_slot_status_irq: MDM2AP_SYNC Status = 1
  112. <4>[ 0.267883] [TKEY] tkey_device_init: 8901_lvs2 On
  113. <4>[ 0.268493] [TKEY] tkey_device_init: TKEY_L12 3.3 V Set
  114. <4>[ 0.268615] brcm_wlan_init: start
  115. <4>[ 0.268707] brcm_init_wlan_mem: WIFI MEM Allocated
  116. <6>[ 0.288360] bio: create slab <bio-0> at 0
  117. <6>[ 0.289794] ION heap vmalloc created
  118. <6>[ 0.289916] ION heap mm created at 38800000 with size 3600000
  119. <6>[ 0.290069] ION heap mm_fw created at 38600000 with size 200000
  120. <6>[ 0.290191] ION heap mfc created at 3be00000 with size 2000
  121. <6>[ 0.290344] ION heap sf created at 78f00000 with size 4000000
  122. <6>[ 0.290435] ION heap camera_preview created at 7cf00000 with size 1200000
  123. <6>[ 0.290618] ION heap wb created at 7e100000 with size 1400000
  124. <6>[ 0.290710] ION heap qsecom created at 7f500000 with size 600000
  125. <6>[ 0.290863] ION heap audio created at 7fb00000 with size 4cf000
  126. <5>[ 0.291137] pmic8058_pwm_probe: OK
  127. <5>[ 0.291839] SCSI subsystem initialized
  128. <6>[ 0.292114] usbcore: registered new interface driver usbfs
  129. <6>[ 0.292266] usbcore: registered new interface driver hub
  130. <6>[ 0.292510] usbcore: registered new device driver usb
  131. <6>[ 0.292968] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
  132. <6>[ 0.293273] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
  133. <6>[ 0.293579] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
  134. <6>[ 0.293823] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
  135. <6>[ 0.294158] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
  136. <6>[ 0.294403] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
  137. <6>[ 0.294708] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
  138. <6>[ 0.295074] Advanced Linux Sound Architecture Driver Version 1.0.24.
  139. <6>[ 0.295715] Bluetooth: Core ver 2.16
  140. <6>[ 0.295806] NET: Registered protocol family 31
  141. <6>[ 0.295959] Bluetooth: HCI device and connection manager initialized
  142. <6>[ 0.296020] Bluetooth: HCI socket layer initialized
  143. <6>[ 0.296142] Bluetooth: L2CAP socket layer initialized
  144. <6>[ 0.296386] Bluetooth: SCO socket layer initialized
  145. <6>[ 0.296936] cfg80211: Calling CRDA to update world regulatory domain
  146. <6>[ 0.297271] Switching to clocksource gp_timer
  147. <6>[ 0.318603] NET: Registered protocol family 2
  148. <6>[ 0.318847] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  149. <6>[ 0.319244] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  150. <6>[ 0.320068] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  151. <6>[ 0.321105] TCP: Hash tables configured (established 65536 bind 65536)
  152. <6>[ 0.321197] TCP reno registered
  153. <6>[ 0.321258] UDP hash table entries: 256 (order: 1, 12288 bytes)
  154. <6>[ 0.321411] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  155. <6>[ 0.321960] NET: Registered protocol family 1
  156. <6>[ 0.322326] RPC: Registered named UNIX socket transport module.
  157. <6>[ 0.322387] RPC: Registered udp transport module.
  158. <6>[ 0.322509] RPC: Registered tcp transport module.
  159. <6>[ 0.322601] RPC: Registered tcp NFSv4.1 backchannel transport module.
  160. <6>[ 0.322937] Trying to unpack rootfs image as initramfs...
  161. <6>[ 0.463439] Freeing initrd memory: 3560K
  162. <6>[ 0.463897] PMU: registered new PMU device of type 0
  163. <6>[ 0.464172] PMU: registered new PMU device of type 1
  164. <6>[ 0.464691] ETM/ETB intialized.
  165. <6>[ 0.464904] pil_qdsp6v3 pil_qdsp6v3: using secure boot
  166. <6>[ 0.465393] pil_modem pil_modem: using secure boot
  167. <6>[ 0.465698] sdio_al:SDIO-AL SW version 1.30
  168. <3>[ 0.468780] smd_channel_probe_worker: allocation table not initialized
  169. <6>[ 0.475372] msm_dsps driver version 3.03.
  170. <6>[ 0.481353] lpa_if_init: lpa_if_ptr 0xde9e8f00 buf_vir 0xffdf0000 buf_phy 0x5e5e0000 buf_zise 65536
  171. <6>[ 0.482238] dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
  172. <3>[ 0.483917] sec_switch_probe enter sec_switch_probe
  173. <6>[ 0.484710] charm_modem_probe: Registering charm modem
  174. <5>[ 0.487030] msm_rpm_log_probe: OK
  175. <3>[ 0.487274] [BT] bcm4330_bluetooth_init
  176. <3>[ 0.488037] [BT] bcm4330_bluetooth_probe
  177. <3>[ 0.488525] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008
  178. <3>[ 0.488586] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000
  179. <6>[ 0.489105] sec_log_save_old: saved old log at 2102@de143000
  180. <6>[ 0.493591] sec_getlog_supply_kloginfo: 0xc112d61c
  181. <6>[ 0.493774] audit: initializing netlink socket (disabled)
  182. <5>[ 0.493927] type=2000 audit(0.460:1): initialized
  183. <4>[ 0.576538] highmem bounce pool size: 64 pages
  184. <6>[ 0.576812] ashmem: initialized
  185. <6>[ 0.582855] exFAT: Version 1.2.9
  186. <6>[ 0.584747] fuse init (API version 7.16)
  187. <6>[ 0.585174] msgmni has been set to 741
  188. <7>[ 0.585327] SELinux: Registering netfilter hooks
  189. <6>[ 0.587341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  190. <6>[ 0.587493] io scheduler noop registered
  191. <6>[ 0.587615] io scheduler deadline registered (default)
  192. <6>[ 0.587707] io scheduler row registered
  193. <6>[ 0.587921] io scheduler cfq registered
  194. <4>[ 0.590515] mdp4_csc_config: Block type 10 isn't supported by CSC.
  195. <4>[ 0.590667] mdp4_csc_config: Block type 8 isn't supported by CSC.
  196. <4>[ 0.594787] ld9040 start lcdc_ld9040_panel_init
  197. <4>[ 0.595031] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
  198. <4>[ 0.595123] ld9040 msm_fb_add_device START
  199. <6>[ 0.595214] setting pdata->panel_info.fb_num to 3. type: 0
  200. <3>[ 0.595367] msm_fb_add_device: msm_fb_device_alloc failed!
  201. <4>[ 0.595458] ld9040 msm_fb_add_device end
  202. <4>[ 0.596008] ld9040 platform_driver_register(&this_driver) is done
  203. <4>[ 0.596099] ld9040 LDI : EA8868, pixelclock 27400000
  204. <6>[ 0.596557] setting pdata->panel_info.fb_num to 3. type: 3
  205. <6>[ 0.599456] mdp4_lcdc_vsync_init: ndx=0
  206. <3>[ 0.601776] pm_runtime: fail to wake up
  207. <4>[ 0.601837] [kmj] lcdc_LD9040_panel_power:enable:1
  208. <4>[ 0.602935] ld9040 lcdc_ld9040_panel_on + (0,0,0)
  209. <4>[ 0.602966] ld9040 : lcdc_config_gpios [1]
  210. <4>[ 0.602996] ld9040 start spi_init
  211. <4>[ 0.603027] ld9040 clk : 103, cs : 104, sdi : 106
  212. <4>[ 0.603057] ld9040 start ld9040_disp_powerup
  213. <4>[ 0.657592] ld9040 start ld9040_disp_on - HW Rev: 13
  214. <4>[ 0.788269] ld9040 ld9040_read_lcd_id: a1 3 22
  215. <4>[ 0.788269] ld9040 lcd EA8868 M3
  216. <4>[ 0.851654] ld9040 ACL_cutoff_set Percentage : 40!!
  217. <4>[ 0.852996] ld9040 ea8868_gamma_ctl 18 18
  218. <4>[ 0.853118] ld9040 lcdc_ld9040_panel_on - (1,1,1)
  219. <4>[ 0.854553] mdp4_csc_config: Block type 10 isn't supported by CSC.
  220. <4>[ 0.854583] mdp4_csc_config: Block type 8 isn't supported by CSC.
  221. <6>[ 0.878570] Console: switching to colour frame buffer device 60x50
  222. <6>[ 0.896606] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  223. <6>[ 0.896759] is_lpcharging_state: is_lpm_boot:0
  224. <4>[ 0.896911] load_565rle_image: Can not open /initlogo.rle
  225. <7>[ 0.897430] Registered led device: lcd-backlight
  226. <6>[ 0.897552] mdp4_lcdc_vsync_init: ndx=0
  227. <6>[ 0.897735] sec_getlog_supply_fbinfo: 0x48000000 480 800 32 2
  228. <4>[ 0.897888] ld9040 platform_device_register(&this_device) is done
  229. <6>[ 0.898498] hdmi_msm hdmi_msm.0: probe
  230. <6>[ 0.899169] hdmi_msm hdmi_msm.1: probe
  231. <6>[ 0.899291] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
  232. <6>[ 0.899566] setting pdata->panel_info.fb_num to 1. type: 7
  233. <6>[ 0.900360] mdp4_dtv_vsync_init: ndx=0
  234. <6>[ 0.902618] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
  235. <6>[ 0.903015] mdp4_dtv_vsync_init: ndx=0
  236. <6>[ 0.903289] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group debb2208
  237. <6>[ 0.903411] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
  238. <6>[ 0.903564] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  239. <7>[ 0.903900] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
  240. <6>[ 0.905059]
  241. <6>[ 0.905059] msm_vidc_enc: Inside vid_enc_init()
  242. <6>[ 0.905487]
  243. <6>[ 0.905487] msm_vidc_enc: Inside vid_enc_vcd_init()
  244. <6>[ 0.905731] is_lpcharging_state: is_lpm_boot:0
  245. <6>[ 0.906066] mhl_v2, Board : get_mhl_int_irq, rev:13
  246. <6>[ 0.906341] create mhl sysfile
  247. <6>[ 0.906799] input: sii9234_rcp as /devices/virtual/input/input0
  248. <6>[ 0.984527] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  249. <6>[ 0.985351] msm_serial_hs module loaded
  250. <6>[ 0.985534] msm_serial_hsl: detected port #1
  251. <6>[ 0.985717] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
  252. <6>[ 0.986328] msm_serial_hsl: detected port #0
  253. <6>[ 0.986511] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  254. <6>[ 0.986694] msm_serial_hsl: console setup on port #0
  255. <6>[ 2.375274] console [ttyHSL0] enabled
  256. <6>[ 2.379547] msm_serial_hsl: driver initialized
  257. <6>[ 2.384521] msm_rotator_probe: rotator_hw_revision=1
  258. <6>[ 2.394714] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  259. <6>[ 2.402740] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  260. <6>[ 2.410400] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  261. <6>[ 2.423126] brd: module loaded
  262. <6>[ 2.428009] loop: module loaded
  263. <6>[ 2.430572] is_lpcharging_state: is_lpm_boot:0
  264. <4>[ 2.434661] ak8975 probe start!
  265. <4>[ 2.438812] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
  266. <4>[ 2.446472] ak8975 probe success!
  267. <6>[ 2.448974] is_lpcharging_state: is_lpm_boot:0
  268. <4>[ 2.453277] k3dh probe start!!
  269. <4>[ 2.456298] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
  270. <4>[ 2.464294] k3dh probe success!!
  271. <6>[ 2.467254] sec_jack:sec_jack_probe : Registering jack driver
  272. <6>[ 2.473022] input: sec_jack as /devices/virtual/input/input1
  273. <5>[ 2.479278] pm8xxx_upl_probe: OK
  274. <3>[ 2.482757] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
  275. <6>[ 2.489807] is_lpcharging_state: is_lpm_boot:0
  276. <6>[ 2.493865] a2220_init
  277. <4>[ 2.496429] i2c-core: driver [audience_a2220] using legacy suspend method
  278. <4>[ 2.502960] i2c-core: driver [audience_a2220] using legacy resume method
  279. <4>[ 2.509918] level device init
  280. <4>[ 2.517791] audience_a2220 :a2220_ioctl : lsj:: a2220_firmware_buf = 78664
  281. <4>[ 2.523834] audience_a2220 :a2220_ioctl: creating thread..
  282. <4>[ 2.529327] init_a2220 -
  283. <4>[ 2.529327] audience_a2220 :a2220_init_thread
  284. <6>[ 2.536163] adie_codec_register_codec_operations: codec type 1
  285. <6>[ 2.542541] Loading pn544 driver
  286. <6>[ 2.545288] pn544_probe : IRQ num 628
  287. <6>[ 2.549163] pn544_probe : requesting IRQ 628
  288. <6>[ 2.553955] SCSI Media Changer driver v0.25
  289. <6>[ 2.557800] PPP generic driver version 2.4.2
  290. <6>[ 2.561920] PPP Deflate Compression module registered
  291. <6>[ 2.566680] PPP BSD Compression module registered
  292. <6>[ 2.574157] PPP MPPE Compression module registered
  293. <6>[ 2.577972] NET: Registered protocol family 24
  294. <6>[ 2.582489] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  295. <6>[ 2.592102] CSLIP: code copyright 1989 Regents of the University of California.
  296. <6>[ 2.599761] tun: Universal TUN/TAP device driver, 1.6
  297. <6>[ 2.604431] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  298. <6>[ 2.611541] smsc911x: Driver version 2008-10-21
  299. <6>[ 2.615447] usbcore: registered new interface driver asix
  300. <6>[ 2.620574] usbcore: registered new interface driver cdc_ether
  301. <6>[ 2.626403] usbcore: registered new interface driver net1080
  302. <4>[ 2.629547] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init +
  303. <6>[ 2.638763] usbcore: registered new interface driver cdc_subset
  304. <6>[ 2.644592] usbcore: registered new interface driver zaurus
  305. <6>[ 2.650207] cdc_ncm: 04-Aug-2011
  306. <6>[ 2.653350] usbcore: registered new interface driver cdc_ncm
  307. <6>[ 2.659027] rmnet_init: SMD devices[8]
  308. <6>[ 2.667022] rmnet_init: SDIO devices[8]
  309. <3>[ 2.672637] msm_hsusb_smb328a_vbus_power attached 0
  310. <6>[ 2.678771] msm_otg msm_otg: success to host_notify_dev_register
  311. <6>[ 2.683990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  312. <4>[ 2.688262] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 1
  313. <4>[ 2.697052] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 2
  314. <6>[ 2.697326] host driver registered w/ tranceiver
  315. <6>[ 2.697570] usbcore: registered new interface driver cdc_acm
  316. <6>[ 2.697601] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  317. <6>[ 2.697692] usbcore: registered new interface driver usblp
  318. <6>[ 2.697723] Initializing USB Mass Storage driver...
  319. <6>[ 2.697784] usbcore: registered new interface driver usb-storage
  320. <6>[ 2.697814] USB Mass Storage support registered.
  321. <6>[ 2.697875] usbcore: registered new interface driver ums-alauda
  322. <6>[ 2.697937] usbcore: registered new interface driver ums-cypress
  323. <6>[ 2.698028] usbcore: registered new interface driver ums-datafab
  324. <6>[ 2.698089] usbcore: registered new interface driver ums-freecom
  325. <6>[ 2.698150] usbcore: registered new interface driver ums-isd200
  326. <6>[ 2.698211] usbcore: registered new interface driver ums-jumpshot
  327. <6>[ 2.698303] usbcore: registered new interface driver ums-karma
  328. <6>[ 2.698394] usbcore: registered new interface driver ums-onetouch
  329. <6>[ 2.698455] usbcore: registered new interface driver ums-sddr09
  330. <6>[ 2.698516] usbcore: registered new interface driver ums-sddr55
  331. <6>[ 2.698577] usbcore: registered new interface driver ums-usbat
  332. <6>[ 2.698638] usbcore: registered new interface driver usb_ehset_test
  333. <6>[ 2.698974] peripheral driver registered w/ tranceiver
  334. <4>[ 2.699005] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
  335. <4>[ 2.826141] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 3
  336. <4>[ 2.831939] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 4
  337. <6>[ 2.838684] a2220_bootup_init: starting to load image (2459 passes)...
  338. <6>[ 2.838714] android_usb gadget: Mass Storage Function, version: 2009/09/11
  339. <6>[ 2.838745] android_usb gadget: Number of LUNs=2
  340. <6>[ 2.838775] lun0: LUN: removable file: (no medium)
  341. <6>[ 2.838806] lun1: LUN: removable file: (no medium)
  342. <6>[ 2.839172] android_usb gadget: android_usb ready
  343. <6>[ 2.872558] DIAG registered SDIO device
  344. <6>[ 2.875701] diagchar initialized now
  345. <6>[ 2.879180] mousedev: PS/2 mouse device common for all mice
  346. <6>[ 2.886199] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input2
  347. <6>[ 2.895233] is_lpcharging_state: is_lpm_boot:0
  348. <3>[ 2.898925] [TSP] mxt224_probe
  349. <6>[ 2.902313] input: sec_touchscreen as /devices/virtual/input/input3
  350. <4>[ 2.908752] mxt224_power_on: enter
  351. <3>[ 2.912139] [TSP POWER ON L1 3.3 enable
  352. <3>[ 2.916046] [TSP POWER ON L4 1.8 enable
  353. <4>[ 2.919555] mxt224_power_on: exit
  354. <4>[ 2.928222] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED
  355. <6>[ 2.932708] [OTG] msm_otg_start_peripheral, on = 1
  356. <4>[ 2.978179] mxt224_power_on is finished
  357. <6>[ 3.022430] qt602240_ts 0-004a: family = 0x81, variant = 0x1, version = 0x10, build = 170
  358. <3>[ 3.029754] [TSP] family = 0x81, variant = 0x1, version = 0x10, build = 170
  359. <3>[ 3.060913] [TSP] TSP chip is MXT224-E
  360. <3>[ 3.064300] [TSP]user_info_value is 0
  361. <6>[ 3.158172] usb_reset: usb: notify offline
  362. <7>[ 3.161315] usb: composite_disconnect
  363. <7>[ 3.164947] usb: android_disconnect schedule_work
  364. <3>[ 3.169708] [TSP] ta_status is 0
  365. <3>[ 3.172698] [TSP] mxt224_ta_probe
  366. <7>[ 3.176483] usb: android_work config= (null),connected=0,sw_connected=0
  367. <6>[ 3.183013] android_work: did not send uevent (0 0 (null))
  368. <3>[ 3.196228] [TSP]TA_probe MXT224E T48 Byte2 is 114
  369. <3>[ 3.202270] [TSP]calibration success!!!
  370. <3>[ 3.205627] [TSP] mxt224_probe e
  371. <3>[ 3.208587] [TSP] Calibration End!!!!!!
  372. <3>[ 3.212249] [TSP] Clearing unused slots
  373. <6>[ 3.216644] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input4
  374. <3>[ 3.227264] [TSP] Calibration!!!!!!
  375. <6>[ 3.230712] using rtc device, pm8xxx_rtc, for alarms
  376. <6>[ 3.234802] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  377. <6>[ 3.242156] i2c /dev entries driver
  378. <3>[ 3.245300] [TSP] Calibration End!!!!!!
  379. <3>[ 3.248870] [TSP] Clearing unused slots
  380. <6>[ 3.255279] is_lpcharging_state: is_lpm_boot:0
  381. <6>[ 3.258850] yda165:yda165_init
  382. <6>[ 3.261840] yda165:yda165_probe
  383. <3>[ 3.264923] yda165:yda165_probe
  384. <5>[ 3.268035] yda165_probe: OK
  385. <6>[ 3.271209] yda165:load_ampgain completed
  386. <6>[ 3.275024] is_lpcharging_state: is_lpm_boot:0
  387. <4>[ 3.279541] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
  388. <6>[ 3.287109] input: proximity_sensor as /devices/virtual/input/input5
  389. <4>[ 3.293640] opt_i2c_probe(839):
  390. <3>[ 3.296447] opt_i2c_probe, 840 : start!!!
  391. <4>[ 3.300445] GP2A opt i2c attach success!!!
  392. <3>[ 3.304565] GP2A opt i2c attach success!!!
  393. <3>[ 3.308593] opt_i2c_probe, 859 : end!!!
  394. <4>[ 3.312469] opt_i2c_client : (0xdea1e600)
  395. <4>[ 3.316925] opt_i2c_write(497): : 0x4, 0x2
  396. <4>[ 3.320495] gp2a_opt_probe is OK!!
  397. <6>[ 3.324401] is_lpcharging_state: is_lpm_boot:0
  398. <6>[ 3.329284] input: light_sensor as /devices/virtual/input/input6
  399. <6>[ 3.334991] input: fsa9480 as /devices/i2c-5/5-0025/input/input7
  400. <6>[ 3.343170] fsa9480 5-0025: fsa9480_reg_init dev ID: 0x0
  401. <4>[ 3.347808] i2c-core: driver [fsa9480] using legacy resume method
  402. <6>[ 3.353820] is_lpcharging_state: is_lpm_boot:0
  403. <4>[ 3.358245] [GYRO] k3g_probe start!
  404. <4>[ 3.361633] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
  405. <3>[ 3.369323] param_sec_operation: filp_open failed. (-2)
  406. <3>[ 3.374420] sec_open_param PARAM OPEN FAIL
  407. <3>[ 3.378509] sec_switch_init_work error value = 3
  408. <6>[ 3.378570] input: gyro_sensor as /devices/virtual/input/input8
  409. <6>[ 3.390380] input: orientation_sensor as /devices/virtual/input/input9
  410. <6>[ 3.396392] lirc_dev: IR Remote Control driver registered, major 239
  411. <6>[ 3.402465] IR NEC protocol handler initialized
  412. <6>[ 3.406890] IR RC5(x) protocol handler initialized
  413. <6>[ 3.411743] IR RC6 protocol handler initialized
  414. <6>[ 3.416168] IR JVC protocol handler initialized
  415. <6>[ 3.420776] IR Sony protocol handler initialized
  416. <6>[ 3.425292] IR RC5 (streamzap) protocol handler initialized
  417. <6>[ 3.430908] IR LIRC bridge handler initialized
  418. <6>[ 3.435272] Linux video capture interface: v2.00
  419. <6>[ 3.440002] usbcore: registered new interface driver uvcvideo
  420. <6>[ 3.445678] USB Video Class driver (v1.1.0)
  421. <6>[ 3.450836] is_lpcharging_state: is_lpm_boot:0
  422. <4>[ 3.454498] ############# M5MO probe ##############
  423. <7>[ 3.459320] [M5MO] m5mo_sensor_probe : E
  424. <7>[ 3.463104] [M5MO] m5mo_i2c_init : E
  425. <7>[ 3.466735] [M5MO] m5mo_i2c_probe : E
  426. <7>[ 3.470306] [M5MO] m5mo_i2c_probe : m5mo_i2c_probe X
  427. <7>[ 3.470336]
  428. <6>[ 3.478179] is_lpcharging_state: is_lpm_boot:0
  429. <4>[ 3.481842] ############# S5K5BAFX probe ##############
  430. <7>[ 3.487243] [5BAFX] s5k5bafx_sensor_probe : E
  431. <7>[ 3.491363] [5BAFX] s5k5bafx_i2c_init : E
  432. <7>[ 3.495269] [5BAFX] s5k5bafx_i2c_probe : E
  433. <7>[ 3.499420] [5BAFX] s5k5bafx_i2c_probe : X
  434. <3>[ 3.503479] [5BAFX] s5k5bafx_sensor_probe:1370:rc = 0
  435. <6>[ 3.509765] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  436. <6>[ 3.516540] max17040_probe: MAX17043 driver Loading!
  437. <6>[ 3.521087] max17040_get_version :
  438. <6>[ 3.525299] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
  439. <6>[ 3.530517] max17040_get_rcomp : current rcomp = 0xc71f(199)
  440. <6>[ 3.536621] max17040_get_rcomp : current rcomp = 0xc71f(199)
  441. <4>[ 3.544952] i2c-core: driver [max17040] using legacy suspend method
  442. <4>[ 3.550354] i2c-core: driver [max17040] using legacy resume method
  443. <6>[ 3.556518] smb328a_probe: SMB328A driver Loading!
  444. <6>[ 3.561279] is_lpcharging_state: is_lpm_boot:0
  445. <6>[ 3.566833] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
  446. <6>[ 3.574462] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
  447. <4>[ 3.580993] i2c-core: driver [smb328a] using legacy suspend method
  448. <4>[ 3.586700] i2c-core: driver [smb328a] using legacy resume method
  449. <6>[ 3.593475] msm_adc successfully registered
  450. <5>[ 3.597625] tsens_tm_probe: OK
  451. <3>[ 3.600189] pm8xxx_init_adc: adc_channel_open() failed.
  452. <3>[ 3.605194] pm8xxx_tm_probe: Unable to initialize adc
  453. <4>[ 3.610198] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
  454. <6>[ 3.616363] pm8xxx_tm_probe: OK
  455. <6>[ 3.619689] device-mapper: uevent: version 1.0.3
  456. <6>[ 3.624176] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  457. <6>[ 3.632354] Bluetooth: HCI UART driver ver 2.2
  458. <6>[ 3.636566] Bluetooth: HCI H4 protocol initialized
  459. <6>[ 3.641387] Bluetooth: HCI_IBS protocol initialized
  460. <6>[ 3.646179] Bluetooth: BlueSleep Mode Driver Ver 1.1
  461. <6>[ 3.652038] cpuidle: using governor ladder
  462. <6>[ 3.655212] cpuidle: using governor menu
  463. <6>[ 3.659515] mmc0: mci-version: 0
  464. <3>[ 3.662475] mmc0: No card detect facilities available
  465. <6>[ 3.667694] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  466. <6>[ 3.675689] mmc0: 8 bit data mode enabled
  467. <6>[ 3.679626] mmc0: 4 bit data mode disabled
  468. <6>[ 3.683685] mmc0: polling status mode disabled
  469. <6>[ 3.688171] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  470. <6>[ 3.693756] mmc0: Slot eject status = 0
  471. <6>[ 3.697631] mmc0: Power save feature enable = 1
  472. <6>[ 3.702087] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d900000
  473. <6>[ 3.708740] mmc0: DM cmd busaddr 0x5d900000, cmdptr busaddr 0x5d917f40
  474. <6>[ 3.715454] mmc1: mci-version: 0
  475. <6>[ 3.718872] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
  476. <6>[ 3.726654] mmc1: 8 bit data mode enabled
  477. <6>[ 3.730712] mmc1: 4 bit data mode disabled
  478. <6>[ 3.734741] mmc1: polling status mode disabled
  479. <6>[ 3.739166] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  480. <6>[ 3.744842] mmc1: Slot eject status = 0
  481. <6>[ 3.748626] mmc1: Power save feature enable = 1
  482. <6>[ 3.753173] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d920000
  483. <6>[ 3.759735] mmc1: DM cmd busaddr 0x5d920000, cmdptr busaddr 0x5d937f40
  484. <6>[ 3.766540] mmc2: mci-version: 0
  485. <6>[ 3.770019] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
  486. <6>[ 3.777923] mmc2: 8 bit data mode disabled
  487. <6>[ 3.781982] mmc2: 4 bit data mode enabled
  488. <6>[ 3.783660] mmc0: new high speed MMC card at address 0001
  489. <6>[ 3.791351] mmc2: polling status mode disabled
  490. <6>[ 3.791412] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
  491. <6>[ 3.800354] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  492. <6>[ 3.800384] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
  493. <6>[ 3.811798] mmc2: Slot eject status = 0
  494. <6>[ 3.811828] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
  495. <6>[ 3.821533] mmc2: Power save feature enable = 1
  496. <6>[ 3.825622] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p2
  497. <6>[ 3.837493] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d940000
  498. <6>[ 3.844116] mmc2: DM cmd busaddr 0x5d940000, cmdptr busaddr 0x5d957f40
  499. <6>[ 3.851837] mmc3: mci-version: 0
  500. <6>[ 3.852111] mmcblk0boot1: unknown partition table
  501. <3>[ 3.858978] mmc3: No card detect facilities available
  502. <6>[ 3.865203] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  503. <6>[ 3.865509] mmcblk0boot0: unknown partition table
  504. <6>[ 3.877380] mmc3: 8 bit data mode disabled
  505. <6>[ 3.881378] mmc3: 4 bit data mode enabled
  506. <6>[ 3.885375] mmc3: polling status mode disabled
  507. <6>[ 3.889862] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  508. <6>[ 3.895446] mmc3: Slot eject status = 0
  509. <6>[ 3.899261] mmc3: Power save feature enable = 1
  510. <6>[ 3.903839] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x5d980000
  511. <6>[ 3.910369] mmc3: DM cmd busaddr 0x5d980000, cmdptr busaddr 0x5d997f40
  512. <6>[ 3.917175] mmc4: mci-version: 0
  513. <6>[ 3.920532] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
  514. <6>[ 3.928497] mmc4: 8 bit data mode disabled
  515. <6>[ 3.932495] mmc4: 4 bit data mode enabled
  516. <6>[ 3.936553] mmc4: polling status mode disabled
  517. <6>[ 3.940917] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  518. <6>[ 3.946624] mmc4: Slot eject status = 0
  519. <6>[ 3.950378] mmc4: Power save feature enable = 1
  520. <6>[ 3.954895] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x5d9a0000
  521. <6>[ 3.961547] mmc4: DM cmd busaddr 0x5d9a0000, cmdptr busaddr 0x5d9b7f40
  522. <7>[ 3.968841] Registered led device: camera:flash0
  523. <7>[ 3.972686] Registered led device: camera:flash1
  524. <6>[ 3.979339] usbcore: registered new interface driver usbhid
  525. <6>[ 3.984008] usbhid: USB HID core driver
  526. <6>[ 3.988464] logger: created 512K log 'log_main'
  527. <6>[ 3.992553] logger: created 256K log 'log_events'
  528. <6>[ 3.997131] logger: created 512K log 'log_radio'
  529. <6>[ 4.001800] logger: created 256K log 'log_system'
  530. <6>[ 4.006347] sec_getlog_supply_loggerinfo: 0xc11cb7f8 0xc124b7f8 0xc12cb7f8 0xc130b7f8
  531. <6>[ 4.014984] zram: Created 1 device(s) ...
  532. <6>[ 4.018676] usbcore: registered new interface driver snd-usb-audio
  533. <6>[ 4.025360] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  534. <6>[ 4.032287] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  535. <6>[ 4.040374] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  536. <6>[ 4.049285] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  537. <7>[ 4.053710] gpio_request: gpio-251 (SD_WP_Switch) status -22
  538. <3>[ 4.053741] msm_sdc3_get_wpswitch:Failed to request GPIO 251
  539. <4>[ 4.053771] mmc2: host does not support reading read-only switch. assuming write-enable.
  540. <6>[ 4.055725] mmc2: new high speed SDHC card at address 0001
  541. <6>[ 4.078887] mmcblk1: mmc2:0001 00000 29.2 GiB
  542. <6>[ 4.080444] ALSA device list:
  543. <6>[ 4.080474] #0: msm-audio
  544. <6>[ 4.080963] oprofile: using arm/armv7-scorpionmp
  545. <6>[ 4.081085] GACT probability NOT on
  546. <6>[ 4.081115] Mirror/redirect action on
  547. <6>[ 4.081146] u32 classifier
  548. <6>[ 4.081176] Actions configured
  549. <6>[ 4.081176] Netfilter messages via NETLINK v0.30.
  550. <6>[ 4.081268] nf_conntrack version 0.5.0 (12489 buckets, 49956 max)
  551. <6>[ 4.081756] ctnetlink v0.93: registering with nfnetlink.
  552. <6>[ 4.081848] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  553. <6>[ 4.081878] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  554. <6>[ 4.082550] xt_time: kernel timezone is -0000
  555. <6>[ 4.082763] ip_tables: (C) 2000-2006 Netfilter Core Team
  556. <6>[ 4.082977] arp_tables: (C) 2002 David S. Miller
  557. <6>[ 4.083068] TCP cubic registered
  558. <6>[ 4.083099] Initializing XFRM netlink socket
  559. <6>[ 4.083587] NET: Registered protocol family 10
  560. <6>[ 4.085418] Mobile IPv6
  561. <6>[ 4.085449] ip6_tables: (C) 2000-2006 Netfilter Core Team
  562. <6>[ 4.085632] IPv6 over IPv4 tunneling driver
  563. <6>[ 4.086608] NET: Registered protocol family 17
  564. <6>[ 4.086669] NET: Registered protocol family 15
  565. <6>[ 4.182830] Bluetooth: RFCOMM TTY layer initialized
  566. <6>[ 4.187500] Bluetooth: RFCOMM socket layer initialized
  567. <6>[ 4.192565] Bluetooth: RFCOMM ver 1.11
  568. <6>[ 4.196319] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  569. <6>[ 4.196929] mmcblk1: p1
  570. <6>[ 4.204132] Bluetooth: BNEP filters: protocol multicast
  571. <6>[ 4.209350] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  572. <6>[ 4.215362] NET: Registered protocol family 35
  573. <5>[ 4.219818] Registering the dns_resolver key type
  574. <6>[ 4.224334] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  575. <5>[ 4.232116] Registering SWP/SWPB emulation handler
  576. <6>[ 4.248260] clock_late_init() disabled 182 unused clocks
  577. <6>[ 4.296081] MSM Watchdog Initialized
  578. <3>[ 4.299591] set_dload_mode <0> ( C0016F10 )
  579. <4>[ 4.304046] [TKEY] touchkey_init START
  580. <6>[ 4.307128] is_lpcharging_state: is_lpm_boot:0
  581. <4>[ 4.312561] [TKEY] touchkey_init F/W version: 0x12, Module version:0x22, HW_REV: 0xd
  582. <4>[ 4.319549] [TKEY] sec i2c_touchkey_probe
  583. <6>[ 4.323608] input: sec_touchkey as /devices/virtual/input/input10
  584. <4>[ 4.333435] mmc4: host doesn't support card's voltages
  585. <4>[ 4.337707] [TKEY] enter touchkey_auto_calibration
  586. <3>[ 4.342437] mmc4: error -22 whilst initialising SDIO card
  587. <4>[ 4.350280] mmc4: host doesn't support card's voltages
  588. <3>[ 4.354492] mmc4: error -22 whilst initialising MMC card
  589. <3>[ 4.388061] param_sec_operation: filp_open failed. (-2)
  590. <3>[ 4.392364] sec_open_param PARAM OPEN FAIL
  591. <3>[ 4.399261] sec_switch_init_work error value = 3
  592. <4>[ 4.411163] [TKEY] after touchkey_auto_calibration result = 1
  593. <4>[ 4.416198] [TKEY] touchkey_init END
  594. <6>[ 4.420349] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-01-11 17:24:03 UTC (1420997043)
  595. <6>[ 4.428619] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
  596. <6>[ 4.436035] sec_bat_get_lpcharging_state: LP charging:0
  597. <3>[ 4.443084] sec_bat_measure_work: adc work already on a queue
  598. <6>[ 4.443237] Freeing init memory: 276K
  599. <7>[ 4.463531] SELinux: 1024 avtab hash slots, 2977 rules.
  600. <7>[ 4.469116] SELinux: 1024 avtab hash slots, 2977 rules.
  601. <7>[ 4.473510] SELinux: 1 users, 2 roles, 307 types, 1 bools
  602. <6>[ 4.478759] sec_jack:sec_jack_det_irq_handler : ready = 1.
  603. <6>[ 4.484436] pmic8058_xoadc:The offset for AMUX calibrationwas -571
  604. <6>[ 4.490722] sec_jack: ear micbias off
  605. <4>[ 4.494201] , 1 sens, 1024 cats
  606. <7>[ 4.497558] SELinux: 84 classes, 2977 rules
  607. <7>[ 4.502899] SELinux: Completing initialization.
  608. <7>[ 4.506683] SELinux: Setting up existing superblocks.
  609. <7>[ 4.511810] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  610. <7>[ 4.518951] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  611. <7>[ 4.526855] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  612. <7>[ 4.533935] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  613. <7>[ 4.540771] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  614. <7>[ 4.548004] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  615. <7>[ 4.565032] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  616. <7>[ 4.571075] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  617. <7>[ 4.577880] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  618. <7>[ 4.587005] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  619. <7>[ 4.594268] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  620. <7>[ 4.602264] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  621. <7>[ 4.609375] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  622. <5>[ 4.886260] type=1403 audit(1420997043.950:2): policy loaded auid=4294967295 ses=4294967295
  623. <4>[ 4.894104] SELinux: Loaded policy from /sepolicy
  624. <4>[ 4.901672] SELinux: Loaded file_contexts from /file_contexts
  625. <5>[ 4.906951] type=1404 audit(1420997043.970:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  626. <3>[ 5.398468] param_sec_operation: filp_open failed. (-2)
  627. <3>[ 5.402770] sec_open_param PARAM OPEN FAIL
  628. <3>[ 5.406890] sec_switch_init_work error value = 3
  629. <4>[ 5.861267] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 5
  630. <4>[ 5.867340] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 6
  631. <4>[ 5.873718] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 7
  632. <6>[ 5.908599] a2220_bootup_init: firmware loaded successfully
  633. <4>[ 6.118988] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 8
  634. <4>[ 6.124786] audience_a2220 :a2220_bootup_init : get_hw_rev of Target = 13
  635. <4>[ 6.131561] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 9
  636. <4>[ 6.138366] audience_a2220 :execute_cmdmsg : ...go to suspend first
  637. <4>[ 6.144500] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 10
  638. <4>[ 6.278625] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 11
  639. <6>[ 6.284515] a2220_bootup_init: initialized!
  640. <4>[ 6.288635] audience_a2220 :a2220_bootup_init : a2220_bootup_init - finish
  641. <3>[ 6.408782] param_sec_operation: filp_open failed. (-2)
  642. <3>[ 6.413055] sec_open_param PARAM OPEN FAIL
  643. <3>[ 6.417175] sec_switch_init_work error value = 3
  644. <3>[ 7.418701] param_sec_operation: filp_open failed. (-2)
  645. <3>[ 7.423034] sec_open_param PARAM OPEN FAIL
  646. <3>[ 7.427062] sec_switch_init_work error value = 3
  647. <6>[ 7.766296] sec_bat_get_lpcharging_state: LP charging:0
  648. <3>[ 7.775268] healthd: wakealarm_init: timerfd_create failed
  649. <3>[ 7.775390] init: invalid uid 'fm_radio'
  650. <6>[ 7.842376] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
  651. <7>[ 8.293060] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  652. <7>[ 8.299865] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  653. <7>[ 8.306945] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  654. <7>[ 8.314117] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  655. <3>[ 8.321228] android_usb: already disabled
  656. <3>[ 8.325927] init: Unable to open persistent property directory /data/property errno: 2
  657. <4>[ 8.337921] set_freq_limit: 0x8 0, min 384000, max 1242000
  658. <3>[ 8.338165] healthd: wakealarm_init: timerfd_create failed
  659. <6>[ 8.370513] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,errors=panic
  660. <4>[ 8.382324] CPU1: Booted secondary processor
  661. <7>[ 8.382873] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
  662. <4>[ 8.389923] set_freq_limit: 0x8 -1, min 384000, max 1512000
  663. <4>[ 8.398986] set_freq_limit: 0x8 0, min 384000, max 1242000
  664. <3>[ 8.429504] sec_switch_init_work value = 1
  665. <3>[ 8.432739] sec_switch_set_vbus_status USB_VBUS_AP_ON 2
  666. <4>[ 8.457702] fsa9480_manual_switching(0)
  667. <6>[ 8.471374] healthd: battery l=100 v=4178 t=30.2 h=2 st=2 chg=a
  668. <3>[ 8.491363] android_usb: already disabled
  669. <6>[ 8.498046] adb_open
  670. <6>[ 9.300201] msmsdcc_runtime_suspend: Enter WIFI suspend
  671. <6>[ 9.358795] fsa9480 5-0025: fsa9480_init_detect
  672. <6>[ 9.363861] fsa9480 5-0025: dev1: 0x4, dev2: 0x0
  673. <6>[ 9.367675] fsa9480 5-0025: usb connect
  674. <3>[ 9.371795] fsa9480_usb_cb attached 1
  675. <3>[ 9.375152] [TSP] mxt224_ta_probe
  676. <3>[ 9.390045] [TSP]TA_probe MXT224E T48 Byte2 is 114
  677. <6>[ 9.394226] sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
  678. <3>[ 9.402984] [TSP] Calibration!!!!!!
  679. <3>[ 9.424377] [TSP] Calibration End!!!!!!
  680. <3>[ 9.427429] [TSP] Clearing unused slots
  681. <6>[ 10.068939] smb328a 15-0034: smb328a_set_charging_current :
  682. <6>[ 10.074615] smb328a 15-0034: smb328a_set_command_reg : reg (0x31) = 0x0
  683. <6>[ 10.081878] smb328a_set_command_reg : => reg (0x31) = 0xa9
  684. <6>[ 10.088195] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x0) = 0x31
  685. <6>[ 10.097198] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x0) = 0x17
  686. <6>[ 10.104278] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x1) = 0x5
  687. <6>[ 10.111816] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x1) = 0x10
  688. <6>[ 10.119018] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x2) = 0xca
  689. <6>[ 10.126342] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x3) = 0x1a
  690. <6>[ 10.133972] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x3) = 0xda
  691. <6>[ 10.141143] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x4) = 0x44
  692. <6>[ 10.148803] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x4) = 0x4d
  693. <6>[ 10.156005] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x5) = 0x8b
  694. <6>[ 10.163574] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x5) = 0x0
  695. <6>[ 10.170837] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x6) = 0x5c
  696. <6>[ 10.178344] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x6) = 0x4d
  697. <6>[ 10.185607] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x7) = 0x36
  698. <6>[ 10.193267] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x7) = 0xf6
  699. <6>[ 10.200500] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x8) = 0x0
  700. <6>[ 10.207580] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x9) = 0x0
  701. <6>[ 10.215209] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x9) = 0x1
  702. <6>[ 10.221984] smb328a 15-0034: smb328a_get_input_current_limit :
  703. <6>[ 10.228088] smb328a 15-0034: smb328a_get_input_current_limit : reg (0x1) = 0x10
  704. <6>[ 10.235076] smb328a 15-0034: smb328a_get_input_current_limit : get icl = 450, data = 0
  705. <6>[ 10.243377] smb328a 15-0034: smb328a_get_float_voltage : reg (0x2) = 0xca, float vol = 4200
  706. <6>[ 10.252044] smb328a 15-0034: smb328a_set_top_off : reg (0x0) = 0x17
  707. <6>[ 10.258209] smb328a 15-0034: smb328a_set_top_off : => reg (0x0) = 0x17
  708. <6>[ 10.264404] smb328a 15-0034: smb328a_set_top_off : reg (0x7) = 0xf6
  709. <6>[ 10.271026] smb328a 15-0034: smb328a_set_top_off : => reg (0x7) = 0xf6
  710. <6>[ 10.277587] smb328a 15-0034: smb328a_enable_charging :
  711. <6>[ 10.282287] smb328a 15-0034: smb328a_enable_charging : reg (0x31) = 0xa9
  712. <6>[ 10.289337] smb328a_enable_charging : => reg (0x31) = 0xa9
  713. <6>[ 10.294006] smb328a 15-0034: smb328a_watchdog_control : (1)
  714. <6>[ 10.300476] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4d
  715. <6>[ 10.306945] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4f
  716. <6>[ 10.314575] healthd: battery l=100 v=4201 t=30.2 h=2 st=2 chg=u
  717. <6>[ 10.412414] smb328a_int_work_func
  718. <6>[ 10.415802] smb328a_int_work_func : reg (0x37) = 0x0
  719. <6>[ 10.420776] smb328a_int_work_func : reg (0x36) = 0x7
  720. <6>[ 10.425689] sec_bat_set_property: 1
  721. <6>[ 10.428588] sec_bat_set_property: charger inserted!!
  722. <3>[ 11.403839] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  723. <4>[ 11.403961] ld9040 lcdc_ld9040_panel_off + (1,1,1)
  724. <4>[ 11.538818] ld9040 : lcdc_config_gpios [0]
  725. <4>[ 11.538879] ld9040 start ld9040_disp_powerdown
  726. <4>[ 11.538940] ld9040 lcdc_ld9040_panel_off -
  727. <4>[ 11.539001] [kmj] lcdc_LD9040_panel_power:enable:0
  728. <4>[ 11.572387] [kmj] lcdc_LD9040_panel_power:enable:1
  729. <4>[ 11.574768] ld9040 lcdc_ld9040_panel_on + (0,0,0)
  730. <4>[ 11.574829] ld9040 : lcdc_config_gpios [1]
  731. <4>[ 11.574890] ld9040 start spi_init
  732. <4>[ 11.574951] ld9040 clk : 103, cs : 104, sdi : 106
  733. <4>[ 11.575012] ld9040 start ld9040_disp_powerup
  734. <4>[ 11.628814] ld9040 start ld9040_disp_on - HW Rev: 13
  735. <4>[ 11.632995] ld9040 LCD_M3 : 1
  736. <4>[ 11.638061] ld9040 ACL_cutoff_set Percentage : 40!!
  737. <4>[ 11.641906] ld9040 ea8868_gamma_ctl 18 18
  738. <4>[ 11.642028] ld9040 lcdc_ld9040_panel_on - (1,1,1)
  739. <4>[ 11.645904] mdp4_csc_config: Block type 10 isn't supported by CSC.
  740. <4>[ 11.645965] mdp4_csc_config: Block type 8 isn't supported by CSC.
  741. <6>[ 11.985076] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1
  742. <7>[ 11.993103] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
  743. <6>[ 12.027496] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,errors=panic
  744. <7>[ 12.037261] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
  745. <4>[ 12.280426] ld9040 get_gamma_value_from_bl >>> bl_value:160, gamma_value: 13.
  746. <4>[ 12.280456] ld9040 brightness!!! bl_level=160, tune_level=13 curr=18
  747. <4>[ 12.297454] ld9040 ea8868_gamma_ctl 13 13
  748. <6>[ 12.317382] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: errors=panic
  749. <7>[ 12.325683] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
  750. <7>[ 12.360321] usb: enable_store f:adb
  751. <6>[ 12.363006] adb_bind_config
  752. <4>[ 12.481109] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
  753. <4>[ 12.727935] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
  754. <7>[ 12.754577] usb: android_work config= (null),connected=1,sw_connected=0
  755. <6>[ 12.761322] android_work: sent uevent USB_STATE=CONNECTED
  756. <4>[ 12.765930] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
  757. <7>[ 12.820343] usb: set_config_number single config
  758. <7>[ 12.824157] usb: set_interface_count next_interface_id=1
  759. <7>[ 12.855255] usb: set_config_number single config
  760. <7>[ 12.859069] usb: set_interface_count next_interface_id=1
  761. <7>[ 12.865234] usb: set_config_number single config
  762. <7>[ 12.869018] usb: set_interface_count next_interface_id=1
  763. <6>[ 12.875244] android_usb gadget: full speed config #1: android
  764. <7>[ 12.880798] usb: android_work config=c0cc91cc,connected=1,sw_connected=1
  765. <6>[ 12.887420] android_work: sent uevent USB_STATE=CONFIGURED
  766. <7>[ 12.940673] usb: set_config_number single config
  767. <7>[ 12.944671] usb: set_interface_count next_interface_id=1
  768. <4>[ 26.714660] adbd (167): /proc/167/oom_adj is deprecated, please use /proc/167/oom_score_adj instead.
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!