NT96683 Flash and boot

ND>Tver10130000Non S3 project
W00000000
config dma done
power down DRAM2

UNZOK
Loader Start ...main not selfing..

683_DRAM1_700_1024Gbx2_DRAM2_0_0Gb 04/02/2019 13:49:08

RRRWR key chk
RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
RC
Check SRAM fw
get modelext partition ok
emb modelext addr 0x020000C8
emb modelext size 0x00001594
ipc addr 0x00002000
ld.LdCtrl2 0x00000001
upd_src_addr= 0x02000000
upd_src_size= 0x01B68404
uboot_addr 0x01200000
uboot_size 0x00600000
arm_gic_distif_setup
arm_gic_cpuif_setup
bl_core2_start
uboot_entry 0x01200000
core2_entry_program 0xF07F0300
code2EntryCodelen 0x000000E8
reset core2
wait core2 copy uItronFcompress
uiUpdateFileLen 0x007D42E0
uitron start 0x01800000

F/W NA51000-NT96683 Start ...
CPU2 Linux
HwClock is use RTC.
IPL, H264 360MHz
CPU/DSP clk = 799/480 MHz (480 is dsp's default clk, will change after dsp open)...ERR:DxSys_DumpAndVerifyCPUClk() FAIL!
Memory = 221184 KB, Code/Resv/Stack/Heap = 11790/32/508/208852 KB
Binary = 8048 KB, Part = 1053/1248/0/0/0/0/0/0/0/5715 KB
PwrLost = 0, PwrSrc = 0

=========================================================
  NA51000 SDK
  Copyright (c) 2017 Novatek Microelectronic Corp.
=========================================================
Hello, World!
> System Boot begin

---------------------------------------------------------
LD VERISON: LD_NVT
FW --- Daily Build: Aug 10 2019, 09:58:03
---------------------------------------------------------

Power On Sequence = Normal
uiConfig = 0, 80000000
gNANDTypeSelect = 1

Device ID = 0xef 0xaa 0x21 0x00 0xf8
PStore uiBufSize=262144
WRN:PStore_Open() PStore_Init not set,use PS_TYPE_EMBEDED as default
===================================== video fixed [Display_LCD]
PS_DESC_BLOCK=1
USB 1.5A
CONNECT to CHARGER
cpu2 power on ready
System Boot end
On Boot begin
PStore reset info.
UINet_SetPASSPHRASE(): 12345678
WRN:ImageApp_Movie_SetParam() MOVIE_CONFIG_RECORD_INFO or MOVIE_CONFIG_STREAM_INFO is not configured yet!!!!
UINet_SetPASSPHRASE(): 12345678
Mode {MOVIE} Open begin
mode:3
mode:3
 -sensor count=1, insert_mask=0001, attach_mask=0001, disp_mask=0001
IPL should open first(id = 0)
set rsc index 1 value 0
root[0] A:\Hawkeye\
[VDOENC][0] Set max alloc size, codec = 2, w = 1920, h = 1080, byterate = 4710400, recformat = 2, rotate = 0, svc = 0, ltr = 0, snapshot size = 0, codec size = 3368560, enc buf size = 23552000
VdoEnc need max buf = 19b0674
WRN:iq_init() Sensor mode(0), get from IPL
video config mode [Display_TV] 0
video config mode [Display_HDMI] 5
========== AE_CBMSG_PREVIEWSTABLE ==========
Show Preview! (IPL > Video VSync > AE stable)
MntPath /mnt/sd, IsInserted 1, IsReadOnly 0, bIsFormatted 1, bSkip 0
Wait FileSys e
Change cpu clock to 432 MHZ
CPU/DSP clk = 432/480 MHz (480 is dsp's default clk, will change after dsp open)...PASS
DZoom To 0
[ISF_VDOENC][0] Update queue count = 2
set rsc index 2 value 0
USB 1.5A
CONNECT to CHARGER
Mode {MOVIE} Open end
On Boot end
ERR: ---------Delete FW96683A.bin file!
ERR: IcDetect OK!
MntPath /mnt/sd, IsInserted 1, IsReadOnly 0, bIsFormatted 1, bSkip 1
===================================== video plug [Display_TV]!
Mode {MOVIE} Close begin
[ImageApp_Movie] close stream 0  ret=0
[ISF_VDOENC][2] Update queue count = 1
[ImageApp_Movie] close stream 1  ret=0
ERR:ISF_VdoEnc_SetPortParam() gISF_ImgCapMaxMem.Addr = 0x0
 WRN: nvtmpp private buffer not all freed !!!!
-----PRIVATE POOL ----------------------------------------------------------------
PoolName                  DDR        Addr    BlkSize     BlkCnt  Free  MinFree
MP4Log                      1  0x65300280   0x00000800        1     0        0
Mode {MOVIE} Close end
Mode {MOVIE} Open begin
mode:3
WRN:pll_setClockFreq() Target(26)=>[IDEOUTIFCLK_FREQ] freq can not be divided with no remainder! Result is 67500000Hz.
IDE source clock = 270 MHz
In div[10] vs Out div[4]
ERR:dispdev1_ioctrl() In clk vs out clk not 1:3 (RGBThrougth mode) => 27.000000 MHz : 67.500000 MHz!!!
 => Panel might be corrupt!!! Driver Table target [27.0000]MHz must modified.
ERR:disp_setDisp1DeviceCtWRN:ide_isr() IDE O1 Line start error!
rl() Cant chg obj of act dev!
mode:3
 -sensor count=1WRN:ide_isr() IDE O1 Line start error!
, insert_mask=0001, attach_mask=0001, disp_mask=0001
IPL should open first(id = 0)
set rsc index 1 value 0
root[0] A:\Hawkeye\
[VDOENC][0] Set max alloc size, codec = 2, w = 1920, h = 1080, byterate = 4710400, recformat = 2, rotate = 0, svc = 0, ltr = 0, snapshot size = 0, codec size = 3368560, enc buf size = 23552000
VdoEnc need max buf = 19b0674
DZoom To 0
[ISF_VDOENC][0] Update queue count = 2
========== AE_CBMSG_PREVIEWSTABLE ==========
ERR:disp_setDisp1DeviceCtrl() Non of DISP1 Rotate (0)
set rsc index 2 value 0
Mode {MOVIE} Open end
USB 1.5A
CONNECT to CHARGER
USBConnectType=2