Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- dmesg
- Copyright (c) 1992-2017 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 11.1-RELEASE-p1 #0: Wed Aug 9 11:55:48 UTC 2017
- root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
- FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
- VT(vga): resolution 640x480
- info: [drm] Initialized drm 1.1.0 20060810
- CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (2594.16-MHz K8-class CPU)
- Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
- AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
- AMD Features2=0x1<LAHF>
- Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
- XSAVE Features=0x1<XSAVEOPT>
- VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
- TSC: P-state invariant, performance statistics
- real memory = 4294967296 (4096 MB)
- avail memory = 3767975936 (3593 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <LENOVO TP-G1 >
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
- random: unblocking device.
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #2 Launched!
- SMP: AP CPU #3 Launched!
- Timecounter "TSC-low" frequency 1297079320 Hz quality 1000
- random: entropy device external interface
- kbd1 at kbdmux0
- netmap: loaded module
- module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19
- random: registering fast source Intel Secure Key RNG
- random: fast provider: "Intel Secure Key RNG"
- nexus0
- vtvga0: <VT VGA driver> on motherboard
- cryptosoft0: <software crypto> on motherboard
- acpi0: <LENOVO TP-G1> on motherboard
- acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
- acpi0: Power Button (fixed)
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 550
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- Event timer "HPET3" frequency 14318180 Hz quality 440
- Event timer "HPET4" frequency 14318180 Hz quality 440
- atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- acpi_lid0: <Control Method Lid Switch> on acpi0
- acpi_button0: <Sleep Button> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
- drmn0: <Intel IvyBridge (M)> on vgapci0
- info: [drm] Memory usable by graphics device = 2048M
- info: [drm] MTRR allocation failed. Graphics performance may suffer.
- intel_iicbb0 on drmn0
- iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
- iic0: <I2C generic I/O> on iicbus0
- iicbus1: <Philips I2C bus> on intel_gmbus0
- iic1: <I2C generic I/O> on iicbus1
- intel_iicbb1 on drmn0
- iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
- iic2: <I2C generic I/O> on iicbus2
- iicbus3: <Philips I2C bus> on intel_gmbus1
- iic3: <I2C generic I/O> on iicbus3
- intel_iicbb2 on drmn0
- iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
- iic4: <I2C generic I/O> on iicbus4
- iicbus5: <Philips I2C bus> on intel_gmbus2
- iic5: <I2C generic I/O> on iicbus5
- intel_iicbb3 on drmn0
- iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
- iic6: <I2C generic I/O> on iicbus6
- iicbus7: <Philips I2C bus> on intel_gmbus3
- iic7: <I2C generic I/O> on iicbus7
- intel_iicbb4 on drmn0
- iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
- iic8: <I2C generic I/O> on iicbus8
- iicbus9: <Philips I2C bus> on intel_gmbus4
- iic9: <I2C generic I/O> on iicbus9
- intel_iicbb5 on drmn0
- iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
- iic10: <I2C generic I/O> on iicbus10
- iicbus11: <Philips I2C bus> on intel_gmbus5
- iic11: <I2C generic I/O> on iicbus11
- info: [drm] MSI enabled 1 message(s)
- info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- info: [drm] Driver supports precise vblank timestamp query.
- intel_sdvo_ddc_proxy921920 on drmn0
- info: [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
- intel_sdvo_ddc_proxy921920: detached
- drm_iic_dp_aux0 on drmn0
- drm_iic_dp_aux1 on drmn0
- drm_iic_dp_aux2 on drmn0
- drmn0: taking over the fictitious range 0xe0000000-0xf0000000
- info: [drm] Connector LVDS-1: get mode from tunables:
- info: [drm] - kern.vt.fb.modes.LVDS-1
- info: [drm] - kern.vt.fb.default_mode
- info: [drm] Connector VGA-1: get mode from tunables:
- info: [drm] - kern.vt.fb.modes.VGA-1
- info: [drm] - kern.vt.fb.default_mode
- info: [drm] Connector HDMI-A-1: get mode from tunables:
- info: [drm] - kern.vt.fb.modes.HDMI-A-1
- info: [drm] - kern.vt.fb.default_mode
- info: [drm] Connector DP-1: get mode from tunables:
- info: [drm] - kern.vt.fb.modes.DP-1
- info: [drm] - kern.vt.fb.default_mode
- info: [drm] Connector HDMI-A-2: get mode from tunables:
- info: [drm] - kern.vt.fb.modes.HDMI-A-2
- info: [drm] - kern.vt.fb.default_mode
- info: [drm] Connector HDMI-A-3: get mode from tunables:
- info: [drm] - kern.vt.fb.modes.HDMI-A-3
- info: [drm] - kern.vt.fb.default_mode
- info: [drm] Connector DP-2: get mode from tunables:
- info: [drm] - kern.vt.fb.modes.DP-2
- info: [drm] - kern.vt.fb.default_mode
- info: [drm] Connector DP-3: get mode from tunables:
- info: [drm] - kern.vt.fb.modes.DP-3
- info: [drm] - kern.vt.fb.default_mode
- fbd0 on drmn0
- VT: Replacing driver "vga" with new "fb".
- info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
- vgapci0: Boot video device
- xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf2520000-0xf252ffff irq 16 at device 20.0 on pci0
- xhci0: 32 bytes context size, 64-bit DMA
- xhci0: Port routing mask set to 0xffffffff
- usbus0 on xhci0
- usbus0: 5.0Gbps Super Speed USB v3.0
- pci0: <simple comms> at device 22.0 (no driver attached)
- uart2: <Intel Panther Point KT Controller> port 0x50b0-0x50b7 mem 0xf253c000-0xf253cfff irq 19 at device 22.3 on pci0
- em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x5080-0x509f mem 0xf2500000-0xf251ffff,0xf253b000-0xf253bfff irq 20 at device 25.0 on pci0
- em0: Using an MSI interrupt
- em0: Ethernet address: 28:d2:44:08:5b:df
- em0: netmap queues/slots: TX 1/1024, RX 1/1024
- ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf253a000-0xf253a3ff irq 16 at device 26.0 on pci0
- usbus1: EHCI version 1.0
- usbus1 on ehci0
- usbus1: 480Mbps High Speed USB v2.0
- hdac0: <Intel Panther Point HDA Controller> mem 0xf2530000-0xf2533fff irq 22 at device 27.0 on pci0
- pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
- pcib1: [GIANT-LOCKED]
- pci1: <ACPI PCI bus> on pcib1
- sdhci_pci0: <RICOH R5CE823 SD> mem 0xf1d00000-0xf1d000ff irq 16 at device 0.0 on pci1
- sdhci_pci0: 1 slot(s) allocated
- pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
- pci2: <ACPI PCI bus> on pcib2
- iwn0: <Intel Centrino Advanced-N 6205> mem 0xf1c00000-0xf1c01fff irq 17 at device 0.0 on pci2
- pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
- pcib3: [GIANT-LOCKED]
- ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf2539000-0xf25393ff irq 23 at device 29.0 on pci0
- usbus2: EHCI version 1.0
- usbus2 on ehci1
- usbus2: 480Mbps High Speed USB v2.0
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- ahci0: <Intel Panther Point AHCI SATA controller> port 0x50a8-0x50af,0x50bc-0x50bf,0x50a0-0x50a7,0x50b8-0x50bb,0x5060-0x507f mem 0xf2538000-0xf25387ff irq 19 at device 31.2 on pci0
- ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ahcich4: <AHCI channel> at channel 4 on ahci0
- ahciem0: <AHCI enclosure management bridge> on ahci0
- acpi_tz0: <Thermal Zone> on acpi0
- acpi_tz0: _CRT value is absurd, ignored (200.1C)
- atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- psm0: <PS/2 Mouse> irq 12 on atkbdc0
- psm0: [GIANT-LOCKED]
- psm0: model Generic PS/2 mouse, device ID 0
- battery0: <ACPI Control Method Battery> on acpi0
- acpi_acad0: <AC Adapter> on acpi0
- acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
- orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
- ppc0: cannot reserve I/O port range
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- fuse-freebsd: version 0.4.4, FUSE ABI 7.8
- Timecounters tick every 1.000 msec
- ugen1.1: <Intel EHCI root HUB> at usbus1
- uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- ugen2.1: <Intel EHCI root HUB> at usbus2
- ugen0.1: <0x8086 XHCI root HUB> at usbus0
- uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
- uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
- nvme cam probe device init
- hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
- hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
- pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0
- pcm1: <Realtek ALC269 (Internal Analog Mic)> at nid 18 on hdaa0
- hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
- hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
- pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
- pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1
- pcm4: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1
- ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
- ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
- ses0: SEMB SES Device
- ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
- ada0: <WDC WD5000BPVT-75HXZT3 03.01A03> ATA8-ACS SATA 2.x device
- ada0: Serial Number WD-WX41C4218005
- ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 476940MB (976773168 512 byte sectors)
- ada0: quirks=0x1<4K>
- cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
- cd0: <HL-DT-ST DVDRAM GT80N LT20> Removable CD-ROM SCSI device
- cd0: Serial Number M81D2O82813
- cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
- cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
- Trying to mount root from ufs:/dev/ada0s1a [rw]...
- uhub2: 8 ports with 8 removable, self powered
- info: [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
- uhub0: 3 ports with 3 removable, self powered
- uhub1: 3 ports with 3 removable, self powered
- ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
- uhub3 on uhub0
- uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
- ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
- uhub4 on uhub1
- uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
- uhub3: 6 ports with 6 removable, self powered
- uhub4: 8 ports with 8 removable, self powered
- ugen1.3: <Lenovo Integrated Smart Card Reader> at usbus1
- ugen2.3: <Smart Smart Wireless Device> at usbus2
- ukbd0 on uhub4
- ukbd0: <Smart Smart Wireless Device, class 0/0, rev 1.10/10.01, addr 3> on usbus2
- kbd2 at ukbd0
- ukbd1 on uhub4
- ukbd1: <Smart Smart Wireless Device, class 0/0, rev 1.10/10.01, addr 3> on usbus2
- kbd3 at ukbd1
- ugen1.4: <VGA Webcam VGA Webcam> at usbus1
- wlan0: Ethernet address: 6c:88:14:3d:e5:04
- iwn0: iwn_read_firmware: ucode rev=0x12a80601
- ums0 on uhub4
- ums0: <Smart Smart Wireless Device, class 0/0, rev 1.10/10.01, addr 3> on usbus2
- ums0: 5 buttons and [XYZT] coordinates ID=0
- wlan0: link state changed to UP
- ugen0.2: <vendor 0x2188 USB OPTICAL MOUSE> at usbus0
- ums1 on uhub2
- ums1: <vendor 0x2188 USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
- ums1: 3 buttons and [XYZ] coordinates ID=0
- acpi_tz0: _CRT value is absurd, ignored (200.1C)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement