THE_sonar

WL700_kamikaze_boot

Jan 12th, 2020
222
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.52 KB | None | 0 0
  1. CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
  2. Build Date: | 12 29 20:36:58 CST 2005 ([email protected])
  3. Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
  4. Initializing Arena
  5. Initializing Devices.
  6. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
  7. rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
  8. CPU type 0x29006: 264MHz
  9. Total memory: 67108864 KBytes
  10. Total memory used by CFE: 0x80800000 - 0x8089BA00 (637440)
  11. Initialized Data: 0x80831B70 - 0x80834250 (9952)
  12. BSS Area: 0x80834250 - 0x80835A00 (6064)
  13. Local Heap: 0x80835A00 - 0x80899A00 (409600)
  14. Stack Area: 0x80899A00 - 0x8089BA00 (8192)
  15. Text (code) segment: 0x80800000 - 0x80831B70 (203632)
  16. Boot area (physical): 0x0089C000 - 0x008DC000
  17. Relocation Factor: I:00000000 - D:00000000
  18. Device eth0: hwaddr 00-1A-92-D9-02-CD, ipaddr 192.168.1.1, mask 255.255.255.0
  19. gateway not set, nameserver not set
  20. Null Rescue Flag.
  21. Null Restore Flag.
  22. set pivot_wait = 0
  23. Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
  24. Loading: .. 3760 bytes read
  25. Entry at 0x80001000
  26. Closing network.
  27. Starting program at 0x80001000
  28. CPU revision is: 00029006
  29. Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
  30. Primary data cache 16kB, 2-way, linesize 16 bytes.
  31. Linux version 2.4.35.4 (agb@arrakis) (gcc version 3.4.6 (OpenWrt-2.0)) #12 Wed Dec 30 19:27:21 UTC 2009
  32. Setting the PFC to its default value
  33. Determined physical RAM map:
  34. memory: 04000000 @ 00000000 (usable)
  35. On node 0 totalpages: 16384
  36. zone(0): 16384 pages.
  37. zone(1): 0 pages.
  38. zone(2): 0 pages.
  39. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
  40. CPU: BCM4704 rev 8 at 264 MHz
  41. Using 132.000 MHz high precision timer.
  42. Calibrating delay loop... 263.78 BogoMIPS
  43. Memory: 62868k/65536k available (1437k kernel code, 2668k reserved, 100k data, 84k init, 0k highmem)
  44. Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
  45. Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
  46. Mount cache hash table entries: 512 (order: 0, 4096 bytes)
  47. Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
  48. Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
  49. Checking for 'wait' instruction... unavailable.
  50. POSIX conformance testing by UNIFIX
  51. PCI: Initializing host
  52. PCI: Fixing up bus 0
  53. PCI: Fixing up bridge
  54. PCI: Fixing up bus 1
  55. Linux NET4.0 for Linux 2.4
  56. Based upon Swansea University Computer Society NET3.039
  57. Initializing RT netlink socket
  58. Starting kswapd
  59. Registering mini_fo version $Id$
  60. devfs: v1.12c (20020818) Richard Gooch ([email protected])
  61. devfs: boot_options: 0x1
  62. JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
  63. squashfs: version 3.0 (2006/03/15) Phillip Lougher
  64. pty: 256 Unix98 ptys configured
  65. Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
  66. ttyS00 at 0xb8000300 (irq = 3) is a 16550A
  67. ttyS01 at 0xb8000400 (irq = 3) is a 16550A
  68. b44.c:v0.93 (Mar, 2004)
  69. eth0: Broadcom 47xx 10/100BaseT Ethernet 00:1a:92:d9:02:cd
  70. eth1: Broadcom 47xx 10/100BaseT Ethernet 40:10:18:00:00:2c
  71. Amd/Fujitsu Extended Query Table v1.0 at 0x0040
  72. Physically mapped flash: JEDEC Device ID is 0xC4. Assuming broken CFI table.
  73. Physically mapped flash: Swapping erase regions for broken CFI table.
  74. number of CFI chips: 1
  75. cfi_cmdset_0002: Disabling fast programming due to code brokenness.
  76. Flash device: 0x200000 at 0x1c000000
  77. bootloader size: 262144
  78. Physically mapped flash: Filesystem type: squashfs, size=0x102f8a
  79. Creating 5 MTD partitions on "Physically mapped flash":
  80. 0x00000000-0x00040000 : "cfe"
  81. 0x00040000-0x001f0000 : "linux"
  82. 0x000bc000-0x001c0000 : "rootfs"
  83. mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
  84. 0x001f0000-0x00200000 : "nvram"
  85. 0x001c0000-0x001f0000 : "rootfs_data"
  86. Initializing Cryptographic API
  87. NET4: Linux TCP/IP 1.0 for NET4.0
  88. IP Protocols: ICMP, UDP, TCP, IGMP
  89. IP: routing cache hash table of 512 buckets, 4Kbytes
  90. TCP: Hash tables configured (established 4096 bind 8192)
  91. Linux IP multicast router 0.06 plus PIM-SM
  92. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  93. NET4: Ethernet Bridge 008 for NET4.0
  94. 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
  95. All bugs added by David S. Miller <[email protected]>
  96. VFS: Mounted root (squashfs filesystem) readonly.
  97. Mounted devfs on /dev
  98. Freeing unused kernel memory: 84k freed
  99. Algorithmics/MIPS FPU Emulator v1.5
  100. mount: mounting sysfs on /sys failed: No such device
  101. mount: mounting devfs on /dev failed: Device or resource busy
  102. - preinit -
  103. Press CTRL-C for failsafe
  104. diag: Detected 'ASUS WL-700gE'
  105. diag: Spinning up HDD and enabling leds
  106. b44: eth0: Link is up at 100 Mbps, full duplex.
  107. b44: eth0: Flow control is off for TX and off for RX.
  108. roboswitch: Probing device eth0: found!
  109. switch-robo 5180 0 (unused)
  110. switching to jffs2
  111. mini_fo: using base directory: /
  112. mini_fo: using storage directory: /jffs
  113. - init -
  114. Please press Enter to activate this console. mini_fo: build_sto_structure: failed to create storage dir [1].
  115. mini_fo: get_neg_sto_dentry: ERROR building sto structure.
  116. mini_fo: create_sto_file: ERROR getting neg. sto dentry.
  117. jffs2.bbc: SIZE compression mode activated.
  118. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
  119. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  120. usb.c: registered new driver usbdevfs
  121. usb.c: registered new driver hub
  122. AEC6X80: IDE controller at PCI slot 01:02.0
  123. PCI: Enabling device 01:02.0 (0000 -> 0003)
  124. AEC6X80: chipset revision 16
  125. AEC6X80: not 100% native mode: will probe irqs later
  126. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  127. ide0: BM-DMA at 0x0180-0x0187, BIOS settings: hda:pio, hdb:pio
  128. ide1: BM-DMA at 0x0188-0x018f, BIOS settings: hdc:pio, hdd:pio
  129. hda: HDT722525DLAT80, ATA DISK drive
  130. ide0 at 0x100-0x107,0x10a on irq 2
  131. Journalled Block Device driver loaded
  132. hda: attached ide-disk driver.
  133. hda: host protected area => 1
  134. hda: 488397168 sectors (250059 MB) w/7674KiB Cache, CHS=30401/255/63, UDMA(33)
  135. Partition check:
  136. /dev/ide/host0/bus0/target0/lun0: unknown partition table
  137. ip_tables: (C) 2000-2002 Netfilter core team
  138. ip_conntrack version 2.1 (5953 buckets, 5953 max) - 352 bytes per conntrack
  139. SB USB 1.1 init
  140. usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
  141. usb-ohci.c: usb-00:03.0, PCI device 14e4:4715
  142. usb.c: new USB bus registered, assigned bus number 1
  143. hub.c: USB hub found
  144. hub.c: 2 ports detected
  145. uhci.c: USB Universal Host Controller Interface driver v1.1
  146. PCI: Enabling device 01:03.0 (0000 -> 0001)
  147. uhci.c: USB UHCI at I/O 0x200, IRQ 2
  148. usb.c: new USB bus registered, assigned bus number 2
  149. hub.c: USB hub found
  150. hub.c: 2 ports detected
  151. PCI: Enabling device 01:03.1 (0000 -> 0001)
  152. uhci.c: USB UHCI at I/O 0x220, IRQ 2
  153. usb.c: new USB bus registered, assigned bus number 3
  154. hub.c: USB hub found
  155. hub.c: 2 ports detected
  156. BusyBox v1.11.2 (2009-12-02 06:19:32 UTC) built-in shell (ash)
  157. Enter 'help' for a list of built-in commands.
  158. _______ ________ __
  159. | |.-----.-----.-----.| | | |.----.| |_
  160. | - || _ | -__| || | | || _|| _|
  161. |_______|| __|_____|__|__||________||__| |____|
  162. |__| W I R E L E S S F R E E D O M
  163. KAMIKAZE (8.09.2, r18961) -------------------------
  164. * 10 oz Vodka Shake well with ice and strain
  165. * 10 oz Triple sec mixture into 10 shot glasses.
  166. * 10 oz lime juice Salute!
  167. ---------------------------------------------------
  168. root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment